UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

[netdrvr gianfar] use new phy layer 

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
This commit is contained in:
Andy Fleming 2005-09-23 22:54:21 -04:00 committed by Jeff Garzik
parent acc4b985a6
commit bb40dcbb0f
9 changed files with 432 additions and 1250 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/net/Kconfig
View File

@ -2075,6 +2075,8 @@ config SPIDER_NET
config GIANFAR
tristate "Gianfar Ethernet"
depends on 85xx || 83xx
select PHYLIB
select PHYCONTROL
help
This driver supports the Gigabit TSEC on the MPC85xx
family of chips, and the FEC on the 8540

2
drivers/net/Makefile
View File

@ -13,7 +13,7 @@ obj-$(CONFIG_CHELSIO_T1) += chelsio/
obj-$(CONFIG_BONDING) += bonding/
obj-$(CONFIG_GIANFAR) += gianfar_driver.o
gianfar_driver-objs := gianfar.o gianfar_ethtool.o gianfar_phy.o
gianfar_driver-objs := gianfar.o gianfar_ethtool.o gianfar_mii.o
#
# link order important here

412
drivers/net/gianfar.c
View File

@ -29,12 +29,7 @@
* define the configuration needed by the board are defined in a
* board structure in arch/ppc/platforms (though I do not
* discount the possibility that other architectures could one
* day be supported. One assumption the driver currently makes
* is that the PHY is configured in such a way to advertise all
* capabilities. This is a sensible default, and on certain
* PHYs, changing this default encounters substantial errata
* issues. Future versions may remove this requirement, but for
* now, it is best for the firmware to ensure this is the case.
* day be supported.
*
* The Gianfar Ethernet Controller uses a ring of buffer
* descriptors. The beginning is indicated by a register
@ -47,7 +42,7 @@
* corresponding bit in the IMASK register is also set (if
* interrupt coalescing is active, then the interrupt may not
* happen immediately, but will wait until either a set number
* of frames or amount of time have passed.). In NAPI, the
* of frames or amount of time have passed). In NAPI, the
* interrupt handler will signal there is work to be done, and
* exit. Without NAPI, the packet(s) will be handled
* immediately. Both methods will start at the last known empty
@ -75,6 +70,7 @@
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
@ -97,9 +93,11 @@
#include <linux/version.h>
#include <linux/dma-mapping.h>
#include <linux/crc32.h>
#include <linux/mii.h>
#include <linux/phy.h>
#include "gianfar.h"
#include "gianfar_phy.h"
#include "gianfar_mii.h"
#define TX_TIMEOUT (1*HZ)
#define SKB_ALLOC_TIMEOUT 1000000
@ -113,9 +111,8 @@
#endif
const char gfar_driver_name[] = "Gianfar Ethernet";
const char gfar_driver_version[] = "1.1";
const char gfar_driver_version[] = "1.2";
int startup_gfar(struct net_device *dev);
static int gfar_enet_open(struct net_device *dev);
static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev);
static void gfar_timeout(struct net_device *dev);
@ -126,17 +123,13 @@ static int gfar_set_mac_address(struct net_device *dev);
static int gfar_change_mtu(struct net_device *dev, int new_mtu);
static irqreturn_t gfar_error(int irq, void *dev_id, struct pt_regs *regs);
static irqreturn_t gfar_transmit(int irq, void *dev_id, struct pt_regs *regs);
static irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs);
static irqreturn_t gfar_interrupt(int irq, void *dev_id, struct pt_regs *regs);
static irqreturn_t phy_interrupt(int irq, void *dev_id, struct pt_regs *regs);
static void gfar_phy_change(void *data);
static void gfar_phy_timer(unsigned long data);
static void adjust_link(struct net_device *dev);
static void init_registers(struct net_device *dev);
static int init_phy(struct net_device *dev);
static int gfar_probe(struct device *device);
static int gfar_remove(struct device *device);
void free_skb_resources(struct gfar_private *priv);
static void free_skb_resources(struct gfar_private *priv);
static void gfar_set_multi(struct net_device *dev);
static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr);
#ifdef CONFIG_GFAR_NAPI
@ -144,7 +137,6 @@ static int gfar_poll(struct net_device *dev, int *budget);
#endif
int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit);
static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int length);
static void gfar_phy_startup_timer(unsigned long data);
static void gfar_vlan_rx_register(struct net_device *netdev,
struct vlan_group *grp);
static void gfar_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
@ -162,6 +154,9 @@ int gfar_uses_fcb(struct gfar_private *priv)
else
return 0;
}
/* Set up the ethernet device structure, private data,
* and anything else we need before we start */
static int gfar_probe(struct device *device)
{
u32 tempval;
@ -175,7 +170,7 @@ static int gfar_probe(struct device *device)
einfo = (struct gianfar_platform_data *) pdev->dev.platform_data;
if (einfo == NULL) {
if (NULL == einfo) {
printk(KERN_ERR "gfar %d: Missing additional data!\n",
pdev->id);
@ -185,7 +180,7 @@ static int gfar_probe(struct device *device)
/* Create an ethernet device instance */
dev = alloc_etherdev(sizeof (*priv));
if (dev == NULL)
if (NULL == dev)
return -ENOMEM;
priv = netdev_priv(dev);
@ -207,20 +202,11 @@ static int gfar_probe(struct device *device)
priv->regs = (struct gfar *)
ioremap(r->start, sizeof (struct gfar));
if (priv->regs == NULL) {
if (NULL == priv->regs) {
err = -ENOMEM;
goto regs_fail;
}
/* Set the PHY base address */
priv->phyregs = (struct gfar *)
ioremap(einfo->phy_reg_addr, sizeof (struct gfar));
if (priv->phyregs == NULL) {
err = -ENOMEM;
goto phy_regs_fail;
}
spin_lock_init(&priv->lock);
dev_set_drvdata(device, dev);
@ -386,12 +372,10 @@ static int gfar_probe(struct device *device)
return 0;
register_fail:
iounmap((void *) priv->phyregs);
phy_regs_fail:
iounmap((void *) priv->regs);
regs_fail:
free_netdev(dev);
return -ENOMEM;
return err;
}
static int gfar_remove(struct device *device)
@ -402,108 +386,41 @@ static int gfar_remove(struct device *device)
dev_set_drvdata(device, NULL);
iounmap((void *) priv->regs);
iounmap((void *) priv->phyregs);
free_netdev(dev);
return 0;
}
/* Configure the PHY for dev.
* returns 0 if success. -1 if failure
/* Initializes driver's PHY state, and attaches to the PHY.
* Returns 0 on success.
*/
static int init_phy(struct net_device *dev)
{
struct gfar_private *priv = netdev_priv(dev);
struct phy_info *curphy;
unsigned int timeout = PHY_INIT_TIMEOUT;
struct gfar *phyregs = priv->phyregs;
struct gfar_mii_info *mii_info;
int err;
uint gigabit_support =
priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
SUPPORTED_1000baseT_Full : 0;
struct phy_device *phydev;
priv->oldlink = 0;
priv->oldspeed = 0;
priv->oldduplex = -1;
mii_info = kmalloc(sizeof(struct gfar_mii_info),
GFP_KERNEL);
phydev = phy_connect(dev, priv->einfo->bus_id, &adjust_link, 0);
if(NULL == mii_info) {
if (netif_msg_ifup(priv))
printk(KERN_ERR "%s: Could not allocate mii_info\n",
dev->name);
return -ENOMEM;
if (IS_ERR(phydev)) {
printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
return PTR_ERR(phydev);
}
mii_info->speed = SPEED_1000;
mii_info->duplex = DUPLEX_FULL;
mii_info->pause = 0;
mii_info->link = 1;
/* Remove any features not supported by the controller */
phydev->supported &= (GFAR_SUPPORTED | gigabit_support);
phydev->advertising = phydev->supported;
mii_info->advertising = (ADVERTISED_10baseT_Half |
ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half |
ADVERTISED_100baseT_Full |
ADVERTISED_1000baseT_Full);
mii_info->autoneg = 1;
spin_lock_init(&mii_info->mdio_lock);
mii_info->mii_id = priv->einfo->phyid;
mii_info->dev = dev;
mii_info->mdio_read = &read_phy_reg;
mii_info->mdio_write = &write_phy_reg;
priv->mii_info = mii_info;
/* Reset the management interface */
gfar_write(&phyregs->miimcfg, MIIMCFG_RESET);
/* Setup the MII Mgmt clock speed */
gfar_write(&phyregs->miimcfg, MIIMCFG_INIT_VALUE);
/* Wait until the bus is free */
while ((gfar_read(&phyregs->miimind) & MIIMIND_BUSY) &&
timeout--)
cpu_relax();
if(timeout <= 0) {
printk(KERN_ERR "%s: The MII Bus is stuck!\n",
dev->name);
err = -1;
goto bus_fail;
}
/* get info for this PHY */
curphy = get_phy_info(priv->mii_info);
if (curphy == NULL) {
if (netif_msg_ifup(priv))
printk(KERN_ERR "%s: No PHY found\n", dev->name);
err = -1;
goto no_phy;
}
mii_info->phyinfo = curphy;
/* Run the commands which initialize the PHY */
if(curphy->init) {
err = curphy->init(priv->mii_info);
if (err)
goto phy_init_fail;
}
priv->phydev = phydev;
return 0;
phy_init_fail:
no_phy:
bus_fail:
kfree(mii_info);
return err;
}
static void init_registers(struct net_device *dev)
@ -603,24 +520,13 @@ void stop_gfar(struct net_device *dev)
struct gfar *regs = priv->regs;
unsigned long flags;
phy_stop(priv->phydev);
/* Lock it down */
spin_lock_irqsave(&priv->lock, flags);
/* Tell the kernel the link is down */
priv->mii_info->link = 0;
adjust_link(dev);
gfar_halt(dev);
if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR) {
/* Clear any pending interrupts */
mii_clear_phy_interrupt(priv->mii_info);
/* Disable PHY Interrupts */
mii_configure_phy_interrupt(priv->mii_info,
MII_INTERRUPT_DISABLED);
}
spin_unlock_irqrestore(&priv->lock, flags);
/* Free the IRQs */
@ -629,13 +535,7 @@ void stop_gfar(struct net_device *dev)
free_irq(priv->interruptTransmit, dev);
free_irq(priv->interruptReceive, dev);
} else {
free_irq(priv->interruptTransmit, dev);
}
if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR) {
free_irq(priv->einfo->interruptPHY, dev);
} else {
del_timer_sync(&priv->phy_info_timer);
free_irq(priv->interruptTransmit, dev);
}
free_skb_resources(priv);
@ -649,7 +549,7 @@ void stop_gfar(struct net_device *dev)
/* If there are any tx skbs or rx skbs still around, free them.
* Then free tx_skbuff and rx_skbuff */
void free_skb_resources(struct gfar_private *priv)
static void free_skb_resources(struct gfar_private *priv)
{
struct rxbd8 *rxbdp;
struct txbd8 *txbdp;
@ -770,7 +670,7 @@ int startup_gfar(struct net_device *dev)
(struct sk_buff **) kmalloc(sizeof (struct sk_buff *) *
priv->tx_ring_size, GFP_KERNEL);
if (priv->tx_skbuff == NULL) {
if (NULL == priv->tx_skbuff) {
if (netif_msg_ifup(priv))
printk(KERN_ERR "%s: Could not allocate tx_skbuff\n",
dev->name);
@ -785,7 +685,7 @@ int startup_gfar(struct net_device *dev)
(struct sk_buff **) kmalloc(sizeof (struct sk_buff *) *
priv->rx_ring_size, GFP_KERNEL);
if (priv->rx_skbuff == NULL) {
if (NULL == priv->rx_skbuff) {
if (netif_msg_ifup(priv))
printk(KERN_ERR "%s: Could not allocate rx_skbuff\n",
dev->name);
@ -879,13 +779,7 @@ int startup_gfar(struct net_device *dev)
}
}
/* Set up the PHY change work queue */
INIT_WORK(&priv->tq, gfar_phy_change, dev);
init_timer(&priv->phy_info_timer);
priv->phy_info_timer.function = &gfar_phy_startup_timer;
priv->phy_info_timer.data = (unsigned long) priv->mii_info;
mod_timer(&priv->phy_info_timer, jiffies + HZ);
phy_start(priv->phydev);
/* Configure the coalescing support */
if (priv->txcoalescing)
@ -933,11 +827,6 @@ tx_skb_fail:
priv->tx_bd_base,
gfar_read(&regs->tbase0));
if (priv->mii_info->phyinfo->close)
priv->mii_info->phyinfo->close(priv->mii_info);
kfree(priv->mii_info);
return err;
}
@ -1035,7 +924,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
txbdp->status &= TXBD_WRAP;
/* Set up checksumming */
if ((dev->features & NETIF_F_IP_CSUM)
if ((dev->features & NETIF_F_IP_CSUM)
&& (CHECKSUM_HW == skb->ip_summed)) {
fcb = gfar_add_fcb(skb, txbdp);
gfar_tx_checksum(skb, fcb);
@ -1103,11 +992,9 @@ static int gfar_close(struct net_device *dev)
struct gfar_private *priv = netdev_priv(dev);
stop_gfar(dev);
/* Shutdown the PHY */
if (priv->mii_info->phyinfo->close)
priv->mii_info->phyinfo->close(priv->mii_info);
kfree(priv->mii_info);
/* Disconnect from the PHY */
phy_disconnect(priv->phydev);
priv->phydev = NULL;
netif_stop_queue(dev);
@ -1343,7 +1230,7 @@ struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp)
while ((!skb) && timeout--)
skb = dev_alloc_skb(priv->rx_buffer_size + RXBUF_ALIGNMENT);
if (skb == NULL)
if (NULL == skb)
return NULL;
/* We need the data buffer to be aligned properly. We will reserve
@ -1490,7 +1377,7 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb,
struct gfar_private *priv = netdev_priv(dev);
struct rxfcb *fcb = NULL;
if (skb == NULL) {
if (NULL == skb) {
if (netif_msg_rx_err(priv))
printk(KERN_WARNING "%s: Missing skb!!.\n", dev->name);
priv->stats.rx_dropped++;
@ -1718,131 +1605,9 @@ static irqreturn_t gfar_interrupt(int irq, void *dev_id, struct pt_regs *regs)
return IRQ_HANDLED;
}
static irqreturn_t phy_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
struct net_device *dev = (struct net_device *) dev_id;
struct gfar_private *priv = netdev_priv(dev);
/* Clear the interrupt */
mii_clear_phy_interrupt(priv->mii_info);
/* Disable PHY interrupts */
mii_configure_phy_interrupt(priv->mii_info,
MII_INTERRUPT_DISABLED);
/* Schedule the phy change */
schedule_work(&priv->tq);
return IRQ_HANDLED;
}
/* Scheduled by the phy_interrupt/timer to handle PHY changes */
static void gfar_phy_change(void *data)
{
struct net_device *dev = (struct net_device *) data;
struct gfar_private *priv = netdev_priv(dev);
int result = 0;
/* Delay to give the PHY a chance to change the
* register state */
msleep(1);
/* Update the link, speed, duplex */
result = priv->mii_info->phyinfo->read_status(priv->mii_info);
/* Adjust the known status as long as the link
* isn't still coming up */
if((0 == result) || (priv->mii_info->link == 0))
adjust_link(dev);
/* Reenable interrupts, if needed */
if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR)
mii_configure_phy_interrupt(priv->mii_info,
MII_INTERRUPT_ENABLED);
}
/* Called every so often on systems that don't interrupt
* the core for PHY changes */
static void gfar_phy_timer(unsigned long data)
{
struct net_device *dev = (struct net_device *) data;
struct gfar_private *priv = netdev_priv(dev);
schedule_work(&priv->tq);
mod_timer(&priv->phy_info_timer, jiffies +
GFAR_PHY_CHANGE_TIME * HZ);
}
/* Keep trying aneg for some time
* If, after GFAR_AN_TIMEOUT seconds, it has not
* finished, we switch to forced.
* Either way, once the process has completed, we either
* request the interrupt, or switch the timer over to
* using gfar_phy_timer to check status */
static void gfar_phy_startup_timer(unsigned long data)
{
int result;
static int secondary = GFAR_AN_TIMEOUT;
struct gfar_mii_info *mii_info = (struct gfar_mii_info *)data;
struct gfar_private *priv = netdev_priv(mii_info->dev);
/* Configure the Auto-negotiation */
result = mii_info->phyinfo->config_aneg(mii_info);
/* If autonegotiation failed to start, and
* we haven't timed out, reset the timer, and return */
if (result && secondary--) {
mod_timer(&priv->phy_info_timer, jiffies + HZ);
return;
} else if (result) {
/* Couldn't start autonegotiation.
* Try switching to forced */
mii_info->autoneg = 0;
result = mii_info->phyinfo->config_aneg(mii_info);
/* Forcing failed! Give up */
if(result) {
if (netif_msg_link(priv))
printk(KERN_ERR "%s: Forcing failed!\n",
mii_info->dev->name);
return;
}
}
/* Kill the timer so it can be restarted */
del_timer_sync(&priv->phy_info_timer);
/* Grab the PHY interrupt, if necessary/possible */
if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR) {
if (request_irq(priv->einfo->interruptPHY,
phy_interrupt,
SA_SHIRQ,
"phy_interrupt",
mii_info->dev) < 0) {
if (netif_msg_intr(priv))
printk(KERN_ERR "%s: Can't get IRQ %d (PHY)\n",
mii_info->dev->name,
priv->einfo->interruptPHY);
} else {
mii_configure_phy_interrupt(priv->mii_info,
MII_INTERRUPT_ENABLED);
return;
}
}
/* Start the timer again, this time in order to
* handle a change in status */
init_timer(&priv->phy_info_timer);
priv->phy_info_timer.function = &gfar_phy_timer;
priv->phy_info_timer.data = (unsigned long) mii_info->dev;
mod_timer(&priv->phy_info_timer, jiffies +
GFAR_PHY_CHANGE_TIME * HZ);
}
/* Called every time the controller might need to be made
* aware of new link state. The PHY code conveys this
* information through variables in the priv structure, and this
* information through variables in the phydev structure, and this
* function converts those variables into the appropriate
* register values, and can bring down the device if needed.
*/
@ -1850,84 +1615,68 @@ static void adjust_link(struct net_device *dev)
{
struct gfar_private *priv = netdev_priv(dev);
struct gfar *regs = priv->regs;
u32 tempval;
struct gfar_mii_info *mii_info = priv->mii_info;
unsigned long flags;
struct phy_device *phydev = priv->phydev;
int new_state = 0;
spin_lock_irqsave(&priv->lock, flags);
if (phydev->link) {
u32 tempval = gfar_read(&regs->maccfg2);
if (mii_info->link) {
/* Now we make sure that we can be in full duplex mode.
* If not, we operate in half-duplex mode. */
if (mii_info->duplex != priv->oldduplex) {
if (!(mii_info->duplex)) {
tempval = gfar_read(&regs->maccfg2);
if (phydev->duplex != priv->oldduplex) {
new_state = 1;
if (!(phydev->duplex))
tempval &= ~(MACCFG2_FULL_DUPLEX);
gfar_write(&regs->maccfg2, tempval);
if (netif_msg_link(priv))
printk(KERN_INFO "%s: Half Duplex\n",
dev->name);
} else {
tempval = gfar_read(&regs->maccfg2);
else
tempval |= MACCFG2_FULL_DUPLEX;
gfar_write(&regs->maccfg2, tempval);
if (netif_msg_link(priv))
printk(KERN_INFO "%s: Full Duplex\n",
dev->name);
}
priv->oldduplex = mii_info->duplex;
priv->oldduplex = phydev->duplex;
}
if (mii_info->speed != priv->oldspeed) {
switch (mii_info->speed) {
if (phydev->speed != priv->oldspeed) {
new_state = 1;
switch (phydev->speed) {
case 1000:
tempval = gfar_read(&regs->maccfg2);
tempval =
((tempval & ~(MACCFG2_IF)) | MACCFG2_GMII);
gfar_write(&regs->maccfg2, tempval);
break;
case 100:
case 10:
tempval = gfar_read(&regs->maccfg2);
tempval =
((tempval & ~(MACCFG2_IF)) | MACCFG2_MII);
gfar_write(&regs->maccfg2, tempval);
break;
default:
if (netif_msg_link(priv))
printk(KERN_WARNING
"%s: Ack! Speed (%d) is not 10/100/1000!\n",
dev->name, mii_info->speed);
"%s: Ack! Speed (%d) is not 10/100/1000!\n",
dev->name, phydev->speed);
break;
}
if (netif_msg_link(priv))
printk(KERN_INFO "%s: Speed %dBT\n", dev->name,
mii_info->speed);
priv->oldspeed = mii_info->speed;
priv->oldspeed = phydev->speed;
}
gfar_write(&regs->maccfg2, tempval);
if (!priv->oldlink) {
if (netif_msg_link(priv))
printk(KERN_INFO "%s: Link is up\n", dev->name);
new_state = 1;
priv->oldlink = 1;
netif_carrier_on(dev);
netif_schedule(dev);
}
} else {
if (priv->oldlink) {
if (netif_msg_link(priv))
printk(KERN_INFO "%s: Link is down\n",
dev->name);
priv->oldlink = 0;
priv->oldspeed = 0;
priv->oldduplex = -1;
netif_carrier_off(dev);
}
} else if (priv->oldlink) {
new_state = 1;
priv->oldlink = 0;
priv->oldspeed = 0;
priv->oldduplex = -1;
}
}
if (new_state && netif_msg_link(priv))
phy_print_status(phydev);
spin_unlock_irqrestore(&priv->lock, flags);
}
/* Update the hash table based on the current list of multicast
* addresses we subscribe to. Also, change the promiscuity of
@ -2122,12 +1871,23 @@ static struct device_driver gfar_driver = {
static int __init gfar_init(void)
{
return driver_register(&gfar_driver);
int err = gfar_mdio_init();
if (err)
return err;
err = driver_register(&gfar_driver);
if (err)
gfar_mdio_exit();
return err;
}
static void __exit gfar_exit(void)
{
driver_unregister(&gfar_driver);
gfar_mdio_exit();
}
module_init(gfar_init);

30
drivers/net/gianfar.h
View File

@ -17,7 +17,6 @@
*
* Still left to do:
* -Add support for module parameters
* -Add support for ethtool -s
* -Add patch for ethtool phys id
*/
#ifndef __GIANFAR_H
@ -37,7 +36,8 @@
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/fsl_devices.h>
#include <linux/mii.h>
#include <linux/phy.h>
#include <asm/io.h>
#include <asm/irq.h>
@ -48,7 +48,8 @@
#include <linux/workqueue.h>
#include <linux/ethtool.h>
#include <linux/netdevice.h>
#include "gianfar_phy.h"
#include <linux/fsl_devices.h>
#include "gianfar_mii.h"
/* The maximum number of packets to be handled in one call of gfar_poll */
#define GFAR_DEV_WEIGHT 64
@ -73,7 +74,7 @@
#define PHY_INIT_TIMEOUT 100000
#define GFAR_PHY_CHANGE_TIME 2
#define DEVICE_NAME "%s: Gianfar Ethernet Controller Version 1.1, "
#define DEVICE_NAME "%s: Gianfar Ethernet Controller Version 1.2, "
#define DRV_NAME "gfar-enet"
extern const char gfar_driver_name[];
extern const char gfar_driver_version[];
@ -578,12 +579,7 @@ struct gfar {
u32 hafdup; /* 0x.50c - Half Duplex Register */
u32 maxfrm; /* 0x.510 - Maximum Frame Length Register */
u8 res18[12];
u32 miimcfg; /* 0x.520 - MII Management Configuration Register */
u32 miimcom; /* 0x.524 - MII Management Command Register */
u32 miimadd; /* 0x.528 - MII Management Address Register */
u32 miimcon; /* 0x.52c - MII Management Control Register */
u32 miimstat; /* 0x.530 - MII Management Status Register */
u32 miimind; /* 0x.534 - MII Management Indicator Register */
u8 gfar_mii_regs[24]; /* See gianfar_phy.h */
u8 res19[4];
u32 ifstat; /* 0x.53c - Interface Status Register */
u32 macstnaddr1; /* 0x.540 - Station Address Part 1 Register */
@ -688,9 +684,6 @@ struct gfar_private {
struct gfar *regs; /* Pointer to the GFAR memory mapped Registers */
u32 *hash_regs[16];
int hash_width;
struct gfar *phyregs;
struct work_struct tq;
struct timer_list phy_info_timer;
struct net_device_stats stats; /* linux network statistics */
struct gfar_extra_stats extra_stats;
spinlock_t lock;
@ -710,7 +703,8 @@ struct gfar_private {
unsigned int interruptError;
struct gianfar_platform_data *einfo;
struct gfar_mii_info *mii_info;
struct phy_device *phydev;
struct mii_bus *mii_bus;
int oldspeed;
int oldduplex;
int oldlink;
@ -732,4 +726,12 @@ extern inline void gfar_write(volatile unsigned *addr, u32 val)
extern struct ethtool_ops *gfar_op_array[];
extern irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs);
extern int startup_gfar(struct net_device *dev);
extern void stop_gfar(struct net_device *dev);
extern void gfar_halt(struct net_device *dev);
extern void gfar_phy_test(struct mii_bus *bus, struct phy_device *phydev,
int enable, u32 regnum, u32 read);
void gfar_setup_stashing(struct net_device *dev);
#endif /* __GIANFAR_H */

98
drivers/net/gianfar_ethtool.c
View File

@ -39,17 +39,18 @@
#include <asm/types.h>
#include <asm/uaccess.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/phy.h>
#include "gianfar.h"
#define is_power_of_2(x) ((x) != 0 && (((x) & ((x) - 1)) == 0))
extern int startup_gfar(struct net_device *dev);
extern void stop_gfar(struct net_device *dev);
extern void gfar_halt(struct net_device *dev);
extern void gfar_start(struct net_device *dev);
extern int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit);
#define GFAR_MAX_COAL_USECS 0xffff
#define GFAR_MAX_COAL_FRAMES 0xff
static void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy,
u64 * buf);
static void gfar_gstrings(struct net_device *dev, u32 stringset, u8 * buf);
@ -182,38 +183,32 @@ static void gfar_gdrvinfo(struct net_device *dev, struct
drvinfo->eedump_len = 0;
}
static int gfar_ssettings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct gfar_private *priv = netdev_priv(dev);
struct phy_device *phydev = priv->phydev;
if (NULL == phydev)
return -ENODEV;
return phy_ethtool_sset(phydev, cmd);
}
/* Return the current settings in the ethtool_cmd structure */
static int gfar_gsettings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct gfar_private *priv = netdev_priv(dev);
uint gigabit_support =
priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
SUPPORTED_1000baseT_Full : 0;
uint gigabit_advert =
priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
ADVERTISED_1000baseT_Full: 0;
struct phy_device *phydev = priv->phydev;
cmd->supported = (SUPPORTED_10baseT_Half
| SUPPORTED_100baseT_Half
| SUPPORTED_100baseT_Full
| gigabit_support | SUPPORTED_Autoneg);
/* For now, we always advertise everything */
cmd->advertising = (ADVERTISED_10baseT_Half
| ADVERTISED_100baseT_Half
| ADVERTISED_100baseT_Full
| gigabit_advert | ADVERTISED_Autoneg);
cmd->speed = priv->mii_info->speed;
cmd->duplex = priv->mii_info->duplex;
cmd->port = PORT_MII;
cmd->phy_address = priv->mii_info->mii_id;
cmd->transceiver = XCVR_EXTERNAL;
cmd->autoneg = AUTONEG_ENABLE;
if (NULL == phydev)
return -ENODEV;
cmd->maxtxpkt = priv->txcount;
cmd->maxrxpkt = priv->rxcount;
return 0;
return phy_ethtool_gset(phydev, cmd);
}
/* Return the length of the register structure */
@ -241,14 +236,14 @@ static unsigned int gfar_usecs2ticks(struct gfar_private *priv, unsigned int use
unsigned int count;
/* The timer is different, depending on the interface speed */
switch (priv->mii_info->speed) {
case 1000:
switch (priv->phydev->speed) {
case SPEED_1000:
count = GFAR_GBIT_TIME;
break;
case 100:
case SPEED_100:
count = GFAR_100_TIME;
break;
case 10:
case SPEED_10:
default:
count = GFAR_10_TIME;
break;
@ -265,14 +260,14 @@ static unsigned int gfar_ticks2usecs(struct gfar_private *priv, unsigned int tic
unsigned int count;
/* The timer is different, depending on the interface speed */
switch (priv->mii_info->speed) {
case 1000:
switch (priv->phydev->speed) {
case SPEED_1000:
count = GFAR_GBIT_TIME;
break;
case 100:
case SPEED_100:
count = GFAR_100_TIME;
break;
case 10:
case SPEED_10:
default:
count = GFAR_10_TIME;
break;
@ -292,6 +287,9 @@ static int gfar_gcoalesce(struct net_device *dev, struct ethtool_coalesce *cvals
if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE))
return -EOPNOTSUPP;
if (NULL == priv->phydev)
return -ENODEV;
cvals->rx_coalesce_usecs = gfar_ticks2usecs(priv, priv->rxtime);
cvals->rx_max_coalesced_frames = priv->rxcount;
@ -348,6 +346,22 @@ static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals
else
priv->rxcoalescing = 1;
if (NULL == priv->phydev)
return -ENODEV;
/* Check the bounds of the values */
if (cvals->rx_coalesce_usecs > GFAR_MAX_COAL_USECS) {
pr_info("Coalescing is limited to %d microseconds\n",
GFAR_MAX_COAL_USECS);
return -EINVAL;
}
if (cvals->rx_max_coalesced_frames > GFAR_MAX_COAL_FRAMES) {
pr_info("Coalescing is limited to %d frames\n",
GFAR_MAX_COAL_FRAMES);
return -EINVAL;
}
priv->rxtime = gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs);
priv->rxcount = cvals->rx_max_coalesced_frames;
@ -358,6 +372,19 @@ static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals
else
priv->txcoalescing = 1;
/* Check the bounds of the values */
if (cvals->tx_coalesce_usecs > GFAR_MAX_COAL_USECS) {
pr_info("Coalescing is limited to %d microseconds\n",
GFAR_MAX_COAL_USECS);
return -EINVAL;
}
if (cvals->tx_max_coalesced_frames > GFAR_MAX_COAL_FRAMES) {
pr_info("Coalescing is limited to %d frames\n",
GFAR_MAX_COAL_FRAMES);
return -EINVAL;
}
priv->txtime = gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs);
priv->txcount = cvals->tx_max_coalesced_frames;
@ -536,6 +563,7 @@ static void gfar_set_msglevel(struct net_device *dev, uint32_t data)
struct ethtool_ops gfar_ethtool_ops = {
.get_settings = gfar_gsettings,
.set_settings = gfar_ssettings,
.get_drvinfo = gfar_gdrvinfo,
.get_regs_len = gfar_reglen,
.get_regs = gfar_get_regs,

219
drivers/net/gianfar_mii.c Normal file
View File

@ -0,0 +1,219 @@
/*
* drivers/net/gianfar_mii.c
*
* Gianfar Ethernet Driver -- MIIM bus implementation
* Provides Bus interface for MIIM regs
*
* Author: Andy Fleming
* Maintainer: Kumar Gala (kumar.gala@freescale.com)
*
* Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/version.h>
#include <asm/ocp.h>
#include <linux/crc32.h>
#include <linux/mii.h>
#include <linux/phy.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include "gianfar.h"
#include "gianfar_mii.h"
/* Write value to the PHY at mii_id at register regnum,
* on the bus, waiting until the write is done before returning.
* All PHY configuration is done through the TSEC1 MIIM regs */
int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
{
struct gfar_mii *regs = bus->priv;
/* Set the PHY address and the register address we want to write */
gfar_write(&regs->miimadd, (mii_id << 8) | regnum);
/* Write out the value we want */
gfar_write(&regs->miimcon, value);
/* Wait for the transaction to finish */
while (gfar_read(&regs->miimind) & MIIMIND_BUSY)
cpu_relax();
return 0;
}
/* Read the bus for PHY at addr mii_id, register regnum, and
* return the value. Clears miimcom first. All PHY
* configuration has to be done through the TSEC1 MIIM regs */
int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
{
struct gfar_mii *regs = bus->priv;
u16 value;
/* Set the PHY address and the register address we want to read */
gfar_write(&regs->miimadd, (mii_id << 8) | regnum);
/* Clear miimcom, and then initiate a read */
gfar_write(&regs->miimcom, 0);
gfar_write(&regs->miimcom, MII_READ_COMMAND);
/* Wait for the transaction to finish */
while (gfar_read(&regs->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
cpu_relax();
/* Grab the value of the register from miimstat */
value = gfar_read(&regs->miimstat);
return value;
}
/* Reset the MIIM registers, and wait for the bus to free */
int gfar_mdio_reset(struct mii_bus *bus)
{
struct gfar_mii *regs = bus->priv;
unsigned int timeout = PHY_INIT_TIMEOUT;
spin_lock_bh(&bus->mdio_lock);
/* Reset the management interface */
gfar_write(&regs->miimcfg, MIIMCFG_RESET);
/* Setup the MII Mgmt clock speed */
gfar_write(&regs->miimcfg, MIIMCFG_INIT_VALUE);
/* Wait until the bus is free */
while ((gfar_read(&regs->miimind) & MIIMIND_BUSY) &&
timeout--)
cpu_relax();
spin_unlock_bh(&bus->mdio_lock);
if(timeout <= 0) {
printk(KERN_ERR "%s: The MII Bus is stuck!\n",
bus->name);
return -EBUSY;
}
return 0;
}
int gfar_mdio_probe(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct gianfar_mdio_data *pdata;
struct gfar_mii *regs;
struct mii_bus *new_bus;
int err = 0;
if (NULL == dev)
return -EINVAL;
new_bus = kmalloc(sizeof(struct mii_bus), GFP_KERNEL);
if (NULL == new_bus)
return -ENOMEM;
new_bus->name = "Gianfar MII Bus",
new_bus->read = &gfar_mdio_read,
new_bus->write = &gfar_mdio_write,
new_bus->reset = &gfar_mdio_reset,
new_bus->id = pdev->id;
pdata = (struct gianfar_mdio_data *)pdev->dev.platform_data;
if (NULL == pdata) {
printk(KERN_ERR "gfar mdio %d: Missing platform data!\n", pdev->id);
return -ENODEV;
}
/* Set the PHY base address */
regs = (struct gfar_mii *) ioremap(pdata->paddr,
sizeof (struct gfar_mii));
if (NULL == regs) {
err = -ENOMEM;
goto reg_map_fail;
}
new_bus->priv = regs;
new_bus->irq = pdata->irq;
new_bus->dev = dev;
dev_set_drvdata(dev, new_bus);
err = mdiobus_register(new_bus);
if (0 != err) {
printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
new_bus->name);
goto bus_register_fail;
}
return 0;
bus_register_fail:
iounmap((void *) regs);
reg_map_fail:
kfree(new_bus);
return err;
}
int gfar_mdio_remove(struct device *dev)
{
struct mii_bus *bus = dev_get_drvdata(dev);
mdiobus_unregister(bus);
dev_set_drvdata(dev, NULL);
iounmap((void *) (&bus->priv));
bus->priv = NULL;
kfree(bus);
return 0;
}
static struct device_driver gianfar_mdio_driver = {
.name = "fsl-gianfar_mdio",
.bus = &platform_bus_type,
.probe = gfar_mdio_probe,
.remove = gfar_mdio_remove,
};
int __init gfar_mdio_init(void)
{
return driver_register(&gianfar_mdio_driver);
}
void __exit gfar_mdio_exit(void)
{
driver_unregister(&gianfar_mdio_driver);
}

45
drivers/net/gianfar_mii.h Normal file
View File

@ -0,0 +1,45 @@
/*
* drivers/net/gianfar_mii.h
*
* Gianfar Ethernet Driver -- MII Management Bus Implementation
* Driver for the MDIO bus controller in the Gianfar register space
*
* Author: Andy Fleming
* Maintainer: Kumar Gala (kumar.gala@freescale.com)
*
* Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef __GIANFAR_MII_H
#define __GIANFAR_MII_H
#define MIIMIND_BUSY 0x00000001
#define MIIMIND_NOTVALID 0x00000004
#define MII_READ_COMMAND 0x00000001
#define GFAR_SUPPORTED (SUPPORTED_10baseT_Half \
| SUPPORTED_100baseT_Half \
| SUPPORTED_100baseT_Full \
| SUPPORTED_Autoneg \
| SUPPORTED_MII)
struct gfar_mii {
u32 miimcfg; /* 0x.520 - MII Management Config Register */
u32 miimcom; /* 0x.524 - MII Management Command Register */
u32 miimadd; /* 0x.528 - MII Management Address Register */
u32 miimcon; /* 0x.52c - MII Management Control Register */
u32 miimstat; /* 0x.530 - MII Management Status Register */
u32 miimind; /* 0x.534 - MII Management Indicator Register */
};
int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum);
int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value);
int __init gfar_mdio_init(void);
void __exit gfar_mdio_exit(void);
#endif /* GIANFAR_PHY_H */

661
drivers/net/gianfar_phy.c
View File

@ -1,661 +0,0 @@
/*
* drivers/net/gianfar_phy.c
*
* Gianfar Ethernet Driver -- PHY handling
* Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560
* Based on 8260_io/fcc_enet.c
*
* Author: Andy Fleming
* Maintainer: Kumar Gala (kumar.gala@freescale.com)
*
* Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <linux/module.h>
#include <linux/version.h>
#include <linux/crc32.h>
#include <linux/mii.h>
#include "gianfar.h"
#include "gianfar_phy.h"
static void config_genmii_advert(struct gfar_mii_info *mii_info);
static void genmii_setup_forced(struct gfar_mii_info *mii_info);
static void genmii_restart_aneg(struct gfar_mii_info *mii_info);
static int gbit_config_aneg(struct gfar_mii_info *mii_info);
static int genmii_config_aneg(struct gfar_mii_info *mii_info);
static int genmii_update_link(struct gfar_mii_info *mii_info);
static int genmii_read_status(struct gfar_mii_info *mii_info);
u16 phy_read(struct gfar_mii_info *mii_info, u16 regnum);
void phy_write(struct gfar_mii_info *mii_info, u16 regnum, u16 val);
/* Write value to the PHY for this device to the register at regnum, */
/* waiting until the write is done before it returns. All PHY */
/* configuration has to be done through the TSEC1 MIIM regs */
void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value)
{
struct gfar_private *priv = netdev_priv(dev);
struct gfar *regbase = priv->phyregs;
/* Set the PHY address and the register address we want to write */
gfar_write(&regbase->miimadd, (mii_id << 8) | regnum);
/* Write out the value we want */
gfar_write(&regbase->miimcon, value);
/* Wait for the transaction to finish */
while (gfar_read(&regbase->miimind) & MIIMIND_BUSY)
cpu_relax();
}
/* Reads from register regnum in the PHY for device dev, */
/* returning the value. Clears miimcom first. All PHY */
/* configuration has to be done through the TSEC1 MIIM regs */
int read_phy_reg(struct net_device *dev, int mii_id, int regnum)
{
struct gfar_private *priv = netdev_priv(dev);
struct gfar *regbase = priv->phyregs;
u16 value;
/* Set the PHY address and the register address we want to read */
gfar_write(&regbase->miimadd, (mii_id << 8) | regnum);
/* Clear miimcom, and then initiate a read */
gfar_write(&regbase->miimcom, 0);
gfar_write(&regbase->miimcom, MII_READ_COMMAND);
/* Wait for the transaction to finish */
while (gfar_read(&regbase->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
cpu_relax();
/* Grab the value of the register from miimstat */
value = gfar_read(&regbase->miimstat);
return value;
}
void mii_clear_phy_interrupt(struct gfar_mii_info *mii_info)
{
if(mii_info->phyinfo->ack_interrupt)
mii_info->phyinfo->ack_interrupt(mii_info);
}
void mii_configure_phy_interrupt(struct gfar_mii_info *mii_info, u32 interrupts)
{
mii_info->interrupts = interrupts;
if(mii_info->phyinfo->config_intr)
mii_info->phyinfo->config_intr(mii_info);
}
/* Writes MII_ADVERTISE with the appropriate values, after
* sanitizing advertise to make sure only supported features
* are advertised
*/
static void config_genmii_advert(struct gfar_mii_info *mii_info)
{
u32 advertise;
u16 adv;
/* Only allow advertising what this PHY supports */
mii_info->advertising &= mii_info->phyinfo->features;
advertise = mii_info->advertising;
/* Setup standard advertisement */
adv = phy_read(mii_info, MII_ADVERTISE);
adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
if (advertise & ADVERTISED_10baseT_Half)
adv |= ADVERTISE_10HALF;
if (advertise & ADVERTISED_10baseT_Full)
adv |= ADVERTISE_10FULL;
if (advertise & ADVERTISED_100baseT_Half)
adv |= ADVERTISE_100HALF;
if (advertise & ADVERTISED_100baseT_Full)
adv |= ADVERTISE_100FULL;
phy_write(mii_info, MII_ADVERTISE, adv);
}
static void genmii_setup_forced(struct gfar_mii_info *mii_info)
{
u16 ctrl;
u32 features = mii_info->phyinfo->features;
ctrl = phy_read(mii_info, MII_BMCR);
ctrl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPEED1000|BMCR_ANENABLE);
ctrl |= BMCR_RESET;
switch(mii_info->speed) {
case SPEED_1000:
if(features & (SUPPORTED_1000baseT_Half
| SUPPORTED_1000baseT_Full)) {
ctrl |= BMCR_SPEED1000;
break;
}
mii_info->speed = SPEED_100;
case SPEED_100:
if (features & (SUPPORTED_100baseT_Half
| SUPPORTED_100baseT_Full)) {
ctrl |= BMCR_SPEED100;
break;
}
mii_info->speed = SPEED_10;
case SPEED_10:
if (features & (SUPPORTED_10baseT_Half
| SUPPORTED_10baseT_Full))
break;
default: /* Unsupported speed! */
printk(KERN_ERR "%s: Bad speed!\n",
mii_info->dev->name);
break;
}
phy_write(mii_info, MII_BMCR, ctrl);
}
/* Enable and Restart Autonegotiation */
static void genmii_restart_aneg(struct gfar_mii_info *mii_info)
{
u16 ctl;
ctl = phy_read(mii_info, MII_BMCR);
ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
phy_write(mii_info, MII_BMCR, ctl);
}
static int gbit_config_aneg(struct gfar_mii_info *mii_info)
{
u16 adv;
u32 advertise;
if(mii_info->autoneg) {
/* Configure the ADVERTISE register */
config_genmii_advert(mii_info);
advertise = mii_info->advertising;
adv = phy_read(mii_info, MII_1000BASETCONTROL);
adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP |
MII_1000BASETCONTROL_HALFDUPLEXCAP);
if (advertise & SUPPORTED_1000baseT_Half)
adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
if (advertise & SUPPORTED_1000baseT_Full)
adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
phy_write(mii_info, MII_1000BASETCONTROL, adv);
/* Start/Restart aneg */
genmii_restart_aneg(mii_info);
} else
genmii_setup_forced(mii_info);
return 0;
}
static int marvell_config_aneg(struct gfar_mii_info *mii_info)
{
/* The Marvell PHY has an errata which requires
* that certain registers get written in order
* to restart autonegotiation */
phy_write(mii_info, MII_BMCR, BMCR_RESET);
phy_write(mii_info, 0x1d, 0x1f);
phy_write(mii_info, 0x1e, 0x200c);
phy_write(mii_info, 0x1d, 0x5);
phy_write(mii_info, 0x1e, 0);
phy_write(mii_info, 0x1e, 0x100);
gbit_config_aneg(mii_info);
return 0;
}
static int genmii_config_aneg(struct gfar_mii_info *mii_info)
{
if (mii_info->autoneg) {
config_genmii_advert(mii_info);
genmii_restart_aneg(mii_info);
} else
genmii_setup_forced(mii_info);
return 0;
}
static int genmii_update_link(struct gfar_mii_info *mii_info)
{
u16 status;
/* Do a fake read */
phy_read(mii_info, MII_BMSR);
/* Read link and autonegotiation status */
status = phy_read(mii_info, MII_BMSR);
if ((status & BMSR_LSTATUS) == 0)
mii_info->link = 0;
else
mii_info->link = 1;
/* If we are autonegotiating, and not done,
* return an error */
if (mii_info->autoneg && !(status & BMSR_ANEGCOMPLETE))
return -EAGAIN;
return 0;
}
static int genmii_read_status(struct gfar_mii_info *mii_info)
{
u16 status;
int err;
/* Update the link, but return if there
* was an error */
err = genmii_update_link(mii_info);
if (err)
return err;
if (mii_info->autoneg) {
status = phy_read(mii_info, MII_LPA);
if (status & (LPA_10FULL | LPA_100FULL))
mii_info->duplex = DUPLEX_FULL;
else
mii_info->duplex = DUPLEX_HALF;
if (status & (LPA_100FULL | LPA_100HALF))
mii_info->speed = SPEED_100;
else
mii_info->speed = SPEED_10;
mii_info->pause = 0;
}
/* On non-aneg, we assume what we put in BMCR is the speed,
* though magic-aneg shouldn't prevent this case from occurring
*/
return 0;
}
static int marvell_read_status(struct gfar_mii_info *mii_info)
{
u16 status;
int err;
/* Update the link, but return if there
* was an error */
err = genmii_update_link(mii_info);
if (err)
return err;
/* If the link is up, read the speed and duplex */
/* If we aren't autonegotiating, assume speeds
* are as set */
if (mii_info->autoneg && mii_info->link) {
int speed;
status = phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS);
#if 0
/* If speed and duplex aren't resolved,
* return an error. Isn't this handled
* by checking aneg?
*/
if ((status & MII_M1011_PHY_SPEC_STATUS_RESOLVED) == 0)
return -EAGAIN;
#endif
/* Get the duplexity */
if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX)
mii_info->duplex = DUPLEX_FULL;
else
mii_info->duplex = DUPLEX_HALF;
/* Get the speed */
speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK;
switch(speed) {
case MII_M1011_PHY_SPEC_STATUS_1000:
mii_info->speed = SPEED_1000;
break;
case MII_M1011_PHY_SPEC_STATUS_100:
mii_info->speed = SPEED_100;
break;
default:
mii_info->speed = SPEED_10;
break;
}
mii_info->pause = 0;
}
return 0;
}
static int cis820x_read_status(struct gfar_mii_info *mii_info)
{
u16 status;
int err;
/* Update the link, but return if there
* was an error */
err = genmii_update_link(mii_info);
if (err)
return err;
/* If the link is up, read the speed and duplex */
/* If we aren't autonegotiating, assume speeds
* are as set */
if (mii_info->autoneg && mii_info->link) {
int speed;
status = phy_read(mii_info, MII_CIS8201_AUX_CONSTAT);
if (status & MII_CIS8201_AUXCONSTAT_DUPLEX)
mii_info->duplex = DUPLEX_FULL;
else
mii_info->duplex = DUPLEX_HALF;
speed = status & MII_CIS8201_AUXCONSTAT_SPEED;
switch (speed) {
case MII_CIS8201_AUXCONSTAT_GBIT:
mii_info->speed = SPEED_1000;
break;
case MII_CIS8201_AUXCONSTAT_100:
mii_info->speed = SPEED_100;
break;
default:
mii_info->speed = SPEED_10;
break;
}
}
return 0;
}
static int marvell_ack_interrupt(struct gfar_mii_info *mii_info)
{
/* Clear the interrupts by reading the reg */
phy_read(mii_info, MII_M1011_IEVENT);
return 0;
}
static int marvell_config_intr(struct gfar_mii_info *mii_info)
{
if(mii_info->interrupts == MII_INTERRUPT_ENABLED)
phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
else
phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
return 0;
}
static int cis820x_init(struct gfar_mii_info *mii_info)
{
phy_write(mii_info, MII_CIS8201_AUX_CONSTAT,
MII_CIS8201_AUXCONSTAT_INIT);
phy_write(mii_info, MII_CIS8201_EXT_CON1,
MII_CIS8201_EXTCON1_INIT);
return 0;
}
static int cis820x_ack_interrupt(struct gfar_mii_info *mii_info)
{
phy_read(mii_info, MII_CIS8201_ISTAT);
return 0;
}
static int cis820x_config_intr(struct gfar_mii_info *mii_info)
{
if(mii_info->interrupts == MII_INTERRUPT_ENABLED)
phy_write(mii_info, MII_CIS8201_IMASK, MII_CIS8201_IMASK_MASK);
else
phy_write(mii_info, MII_CIS8201_IMASK, 0);
return 0;
}
#define DM9161_DELAY 10
static int dm9161_read_status(struct gfar_mii_info *mii_info)
{
u16 status;
int err;
/* Update the link, but return if there
* was an error */
err = genmii_update_link(mii_info);
if (err)
return err;
/* If the link is up, read the speed and duplex */
/* If we aren't autonegotiating, assume speeds
* are as set */
if (mii_info->autoneg && mii_info->link) {
status = phy_read(mii_info, MII_DM9161_SCSR);
if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H))
mii_info->speed = SPEED_100;
else
mii_info->speed = SPEED_10;
if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F))
mii_info->duplex = DUPLEX_FULL;
else
mii_info->duplex = DUPLEX_HALF;
}
return 0;
}
static int dm9161_config_aneg(struct gfar_mii_info *mii_info)
{
struct dm9161_private *priv = mii_info->priv;
if(0 == priv->resetdone)
return -EAGAIN;
return 0;
}
static void dm9161_timer(unsigned long data)
{
struct gfar_mii_info *mii_info = (struct gfar_mii_info *)data;
struct dm9161_private *priv = mii_info->priv;
u16 status = phy_read(mii_info, MII_BMSR);
if (status & BMSR_ANEGCOMPLETE) {
priv->resetdone = 1;
} else
mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ);
}
static int dm9161_init(struct gfar_mii_info *mii_info)
{
struct dm9161_private *priv;
/* Allocate the private data structure */
priv = kmalloc(sizeof(struct dm9161_private), GFP_KERNEL);
if (NULL == priv)
return -ENOMEM;
mii_info->priv = priv;
/* Reset is not done yet */
priv->resetdone = 0;
/* Isolate the PHY */
phy_write(mii_info, MII_BMCR, BMCR_ISOLATE);
/* Do not bypass the scrambler/descrambler */
phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
/* Clear 10BTCSR to default */
phy_write(mii_info, MII_DM9161_10BTCSR, MII_DM9161_10BTCSR_INIT);
/* Reconnect the PHY, and enable Autonegotiation */
phy_write(mii_info, MII_BMCR, BMCR_ANENABLE);
/* Start a timer for DM9161_DELAY seconds to wait
* for the PHY to be ready */
init_timer(&priv->timer);
priv->timer.function = &dm9161_timer;
priv->timer.data = (unsigned long) mii_info;
mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ);
return 0;
}
static void dm9161_close(struct gfar_mii_info *mii_info)
{
struct dm9161_private *priv = mii_info->priv;
del_timer_sync(&priv->timer);
kfree(priv);
}
#if 0
static int dm9161_ack_interrupt(struct gfar_mii_info *mii_info)
{
phy_read(mii_info, MII_DM9161_INTR);
return 0;
}
#endif
/* Cicada 820x */
static struct phy_info phy_info_cis820x = {
0x000fc440,
"Cicada Cis8204",
0x000fffc0,
.features = MII_GBIT_FEATURES,
.init = &cis820x_init,
.config_aneg = &gbit_config_aneg,
.read_status = &cis820x_read_status,
.ack_interrupt = &cis820x_ack_interrupt,
.config_intr = &cis820x_config_intr,
};
static struct phy_info phy_info_dm9161 = {
.phy_id = 0x0181b880,
.name = "Davicom DM9161E",
.phy_id_mask = 0x0ffffff0,
.init = dm9161_init,
.config_aneg = dm9161_config_aneg,
.read_status = dm9161_read_status,
.close = dm9161_close,
};
static struct phy_info phy_info_marvell = {
.phy_id = 0x01410c00,
.phy_id_mask = 0xffffff00,
.name = "Marvell 88E1101/88E1111",
.features = MII_GBIT_FEATURES,
.config_aneg = &marvell_config_aneg,
.read_status = &marvell_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
};
static struct phy_info phy_info_genmii= {
.phy_id = 0x00000000,
.phy_id_mask = 0x00000000,
.name = "Generic MII",
.features = MII_BASIC_FEATURES,
.config_aneg = genmii_config_aneg,
.read_status = genmii_read_status,
};
static struct phy_info *phy_info[] = {
&phy_info_cis820x,
&phy_info_marvell,
&phy_info_dm9161,
&phy_info_genmii,
NULL
};
u16 phy_read(struct gfar_mii_info *mii_info, u16 regnum)
{
u16 retval;
unsigned long flags;
spin_lock_irqsave(&mii_info->mdio_lock, flags);
retval = mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum);
spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
return retval;
}
void phy_write(struct gfar_mii_info *mii_info, u16 regnum, u16 val)
{
unsigned long flags;
spin_lock_irqsave(&mii_info->mdio_lock, flags);
mii_info->mdio_write(mii_info->dev,
mii_info->mii_id,
regnum, val);
spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
}
/* Use the PHY ID registers to determine what type of PHY is attached
* to device dev. return a struct phy_info structure describing that PHY
*/
struct phy_info * get_phy_info(struct gfar_mii_info *mii_info)
{
u16 phy_reg;
u32 phy_ID;
int i;
struct phy_info *theInfo = NULL;
struct net_device *dev = mii_info->dev;
/* Grab the bits from PHYIR1, and put them in the upper half */
phy_reg = phy_read(mii_info, MII_PHYSID1);
phy_ID = (phy_reg & 0xffff) << 16;
/* Grab the bits from PHYIR2, and put them in the lower half */
phy_reg = phy_read(mii_info, MII_PHYSID2);
phy_ID |= (phy_reg & 0xffff);
/* loop through all the known PHY types, and find one that */
/* matches the ID we read from the PHY. */
for (i = 0; phy_info[i]; i++)
if (phy_info[i]->phy_id ==
(phy_ID & phy_info[i]->phy_id_mask)) {
theInfo = phy_info[i];
break;
}
/* This shouldn't happen, as we have generic PHY support */
if (theInfo == NULL) {
printk("%s: PHY id %x is not supported!\n", dev->name, phy_ID);
return NULL;
} else {
printk("%s: PHY is %s (%x)\n", dev->name, theInfo->name,
phy_ID);
}
return theInfo;
}

213
drivers/net/gianfar_phy.h
View File

@ -1,213 +0,0 @@
/*
* drivers/net/gianfar_phy.h
*
* Gianfar Ethernet Driver -- PHY handling
* Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560
* Based on 8260_io/fcc_enet.c
*
* Author: Andy Fleming
* Maintainer: Kumar Gala (kumar.gala@freescale.com)
*
* Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef __GIANFAR_PHY_H
#define __GIANFAR_PHY_H
#define MII_end ((u32)-2)
#define MII_read ((u32)-1)
#define MIIMIND_BUSY 0x00000001
#define MIIMIND_NOTVALID 0x00000004
#define GFAR_AN_TIMEOUT 2000
/* 1000BT control (Marvell & BCM54xx at least) */
#define MII_1000BASETCONTROL 0x09
#define MII_1000BASETCONTROL_FULLDUPLEXCAP 0x0200
#define MII_1000BASETCONTROL_HALFDUPLEXCAP 0x0100
/* Cicada Extended Control Register 1 */
#define MII_CIS8201_EXT_CON1 0x17
#define MII_CIS8201_EXTCON1_INIT 0x0000
/* Cicada Interrupt Mask Register */
#define MII_CIS8201_IMASK 0x19
#define MII_CIS8201_IMASK_IEN 0x8000
#define MII_CIS8201_IMASK_SPEED 0x4000
#define MII_CIS8201_IMASK_LINK 0x2000
#define MII_CIS8201_IMASK_DUPLEX 0x1000
#define MII_CIS8201_IMASK_MASK 0xf000
/* Cicada Interrupt Status Register */
#define MII_CIS8201_ISTAT 0x1a
#define MII_CIS8201_ISTAT_STATUS 0x8000
#define MII_CIS8201_ISTAT_SPEED 0x4000
#define MII_CIS8201_ISTAT_LINK 0x2000
#define MII_CIS8201_ISTAT_DUPLEX 0x1000
/* Cicada Auxiliary Control/Status Register */
#define MII_CIS8201_AUX_CONSTAT 0x1c
#define MII_CIS8201_AUXCONSTAT_INIT 0x0004
#define MII_CIS8201_AUXCONSTAT_DUPLEX 0x0020
#define MII_CIS8201_AUXCONSTAT_SPEED 0x0018
#define MII_CIS8201_AUXCONSTAT_GBIT 0x0010
#define MII_CIS8201_AUXCONSTAT_100 0x0008
/* 88E1011 PHY Status Register */
#define MII_M1011_PHY_SPEC_STATUS 0x11
#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000
#define MII_M1011_PHY_SPEC_STATUS_100 0x4000
#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000
#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000
#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800
#define MII_M1011_PHY_SPEC_STATUS_LINK 0x0400
#define MII_M1011_IEVENT 0x13
#define MII_M1011_IEVENT_CLEAR 0x0000
#define MII_M1011_IMASK 0x12
#define MII_M1011_IMASK_INIT 0x6400
#define MII_M1011_IMASK_CLEAR 0x0000
#define MII_DM9161_SCR 0x10
#define MII_DM9161_SCR_INIT 0x0610
/* DM9161 Specified Configuration and Status Register */
#define MII_DM9161_SCSR 0x11
#define MII_DM9161_SCSR_100F 0x8000
#define MII_DM9161_SCSR_100H 0x4000
#define MII_DM9161_SCSR_10F 0x2000
#define MII_DM9161_SCSR_10H 0x1000
/* DM9161 Interrupt Register */
#define MII_DM9161_INTR 0x15
#define MII_DM9161_INTR_PEND 0x8000
#define MII_DM9161_INTR_DPLX_MASK 0x0800
#define MII_DM9161_INTR_SPD_MASK 0x0400
#define MII_DM9161_INTR_LINK_MASK 0x0200
#define MII_DM9161_INTR_MASK 0x0100
#define MII_DM9161_INTR_DPLX_CHANGE 0x0010
#define MII_DM9161_INTR_SPD_CHANGE 0x0008
#define MII_DM9161_INTR_LINK_CHANGE 0x0004
#define MII_DM9161_INTR_INIT 0x0000
#define MII_DM9161_INTR_STOP \
(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \
| MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
/* DM9161 10BT Configuration/Status */
#define MII_DM9161_10BTCSR 0x12
#define MII_DM9161_10BTCSR_INIT 0x7800
#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | \
SUPPORTED_10baseT_Full | \
SUPPORTED_100baseT_Half | \
SUPPORTED_100baseT_Full | \
SUPPORTED_Autoneg | \
SUPPORTED_TP | \
SUPPORTED_MII)
#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \
SUPPORTED_1000baseT_Half | \
SUPPORTED_1000baseT_Full)
#define MII_READ_COMMAND 0x00000001
#define MII_INTERRUPT_DISABLED 0x0
#define MII_INTERRUPT_ENABLED 0x1
/* Taken from mii_if_info and sungem_phy.h */
struct gfar_mii_info {
/* Information about the PHY type */
/* And management functions */
struct phy_info *phyinfo;
/* forced speed & duplex (no autoneg)
* partner speed & duplex & pause (autoneg)
*/
int speed;
int duplex;
int pause;
/* The most recently read link state */
int link;
/* Enabled Interrupts */
u32 interrupts;
u32 advertising;
int autoneg;
int mii_id;
/* private data pointer */
/* For use by PHYs to maintain extra state */
void *priv;
/* Provided by host chip */
struct net_device *dev;
/* A lock to ensure that only one thing can read/write
* the MDIO bus at a time */
spinlock_t mdio_lock;
/* Provided by ethernet driver */
int (*mdio_read) (struct net_device *dev, int mii_id, int reg);
void (*mdio_write) (struct net_device *dev, int mii_id, int reg, int val);
};
/* struct phy_info: a structure which defines attributes for a PHY
*
* id will contain a number which represents the PHY. During
* startup, the driver will poll the PHY to find out what its
* UID--as defined by registers 2 and 3--is. The 32-bit result
* gotten from the PHY will be ANDed with phy_id_mask to
* discard any bits which may change based on revision numbers
* unimportant to functionality
*
* There are 6 commands which take a gfar_mii_info structure.
* Each PHY must declare config_aneg, and read_status.
*/
struct phy_info {
u32 phy_id;
char *name;
unsigned int phy_id_mask;
u32 features;
/* Called to initialize the PHY */
int (*init)(struct gfar_mii_info *mii_info);
/* Called to suspend the PHY for power */
int (*suspend)(struct gfar_mii_info *mii_info);
/* Reconfigures autonegotiation (or disables it) */
int (*config_aneg)(struct gfar_mii_info *mii_info);
/* Determines the negotiated speed and duplex */
int (*read_status)(struct gfar_mii_info *mii_info);
/* Clears any pending interrupts */
int (*ack_interrupt)(struct gfar_mii_info *mii_info);
/* Enables or disables interrupts */
int (*config_intr)(struct gfar_mii_info *mii_info);
/* Clears up any memory if needed */
void (*close)(struct gfar_mii_info *mii_info);
};
struct phy_info *get_phy_info(struct gfar_mii_info *mii_info);
int read_phy_reg(struct net_device *dev, int mii_id, int regnum);
void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value);
void mii_clear_phy_interrupt(struct gfar_mii_info *mii_info);
void mii_configure_phy_interrupt(struct gfar_mii_info *mii_info, u32 interrupts);
struct dm9161_private {
struct timer_list timer;
int resetdone;
};
#endif /* GIANFAR_PHY_H */