UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

Merge 5.6-rc5 into char-misc-next 

We need the binder and other fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Greg Kroah-Hartman 2020-03-09 08:38:58 +01:00
parent 1f836f5b10 2c523b344d
commit bb3a151dd4
552 changed files with 5647 additions and 3074 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
CREDITS
View File

@ -567,6 +567,11 @@ D: Original author of Amiga FFS filesystem
S: Orlando, Florida
S: USA
N: Paul Burton
E: paulburton@kernel.org
W: https://pburton.com
D: MIPS maintainer 2018-2020
N: Lennert Buytenhek
E: kernel@wantstofly.org
D: Original (2.4) rewrite of the ethernet bridging code

4
Documentation/admin-guide/acpi/fan_performance_states.rst
View File

@ -18,7 +18,7 @@ may look as follows::
$ ls -l /sys/bus/acpi/devices/INT3404:00/
total 0
...
...
-r--r--r-- 1 root root 4096 Dec 13 20:38 state0
-r--r--r-- 1 root root 4096 Dec 13 20:38 state1
-r--r--r-- 1 root root 4096 Dec 13 20:38 state10
@ -38,7 +38,7 @@ where each of the "state*" files represents one performance state of the fan
and contains a colon-separated list of 5 integer numbers (fields) with the
following interpretation::
control_percent:trip_point_index:speed_rpm:noise_level_mdb:power_mw
control_percent:trip_point_index:speed_rpm:noise_level_mdb:power_mw
* ``control_percent``: The percent value to be used to set the fan speed to a
specific level using the _FSL object (0-100).

34
Documentation/admin-guide/bootconfig.rst
View File

@ -62,6 +62,30 @@ Or more shorter, written as following::
In both styles, same key words are automatically merged when parsing it
at boot time. So you can append similar trees or key-values.
Same-key Values
---------------
It is prohibited that two or more values or arrays share a same-key.
For example,::
foo = bar, baz
foo = qux # !ERROR! we can not re-define same key
If you want to append the value to existing key as an array member,
you can use ``+=`` operator. For example::
foo = bar, baz
foo += qux
In this case, the key ``foo`` has ``bar``, ``baz`` and ``qux``.
However, a sub-key and a value can not co-exist under a parent key.
For example, following config is NOT allowed.::
foo = value1
foo.bar = value2 # !ERROR! subkey "bar" and value "value1" can NOT co-exist
Comments
--------
@ -102,9 +126,13 @@ Boot Kernel With a Boot Config
==============================
Since the boot configuration file is loaded with initrd, it will be added
to the end of the initrd (initramfs) image file. The Linux kernel decodes
the last part of the initrd image in memory to get the boot configuration
data.
to the end of the initrd (initramfs) image file with size, checksum and
12-byte magic word as below.
[initrd][bootconfig][size(u32)][checksum(u32)][#BOOTCONFIG\n]
The Linux kernel decodes the last part of the initrd image in memory to
get the boot configuration data.
Because of this "piggyback" method, there is no need to change or
update the boot loader and the kernel image itself.

4
Documentation/admin-guide/kernel-parameters.txt
View File

@ -136,6 +136,10 @@
dynamic table installation which will install SSDT
tables to /sys/firmware/acpi/tables/dynamic.
acpi_no_watchdog [HW,ACPI,WDT]
Ignore the ACPI-based watchdog interface (WDAT) and let
a native driver control the watchdog device instead.
acpi_rsdp= [ACPI,EFI,KEXEC]
Pass the RSDP address to the kernel, mostly used
on machines running EFI runtime service to boot the

1
Documentation/dev-tools/kunit/usage.rst
View File

@ -551,6 +551,7 @@ options to your ``.config``:
Once the kernel is built and installed, a simple
.. code-block:: bash
modprobe example-test
...will run the tests.

2
Documentation/devicetree/bindings/arm/arm,scmi.txt
View File

@ -102,7 +102,7 @@ Required sub-node properties:
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/power/power-domain.yaml
[3] Documentation/devicetree/bindings/thermal/thermal.txt
[4] Documentation/devicetree/bindings/sram/sram.txt
[4] Documentation/devicetree/bindings/sram/sram.yaml
[5] Documentation/devicetree/bindings/reset/reset.txt
Example:

2
Documentation/devicetree/bindings/arm/arm,scpi.txt
View File

@ -109,7 +109,7 @@ Required properties:
[0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/thermal/thermal.txt
[3] Documentation/devicetree/bindings/sram/sram.txt
[3] Documentation/devicetree/bindings/sram/sram.yaml
[4] Documentation/devicetree/bindings/power/power-domain.yaml
Example:

2
Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt
View File

@ -62,7 +62,7 @@ Timer node:
Syscon reboot node:
See Documentation/devicetree/bindings/power/reset/syscon-reboot.txt for the
See Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml for the
detailed list of properties, the two values defined below are specific to the
BCM6328-style timer:

2
Documentation/devicetree/bindings/arm/cpus.yaml
View File

@ -216,7 +216,7 @@ properties:
$ref: '/schemas/types.yaml#/definitions/phandle-array'
description: |
List of phandles to idle state nodes supported
by this cpu (see ./idle-states.txt).
by this cpu (see ./idle-states.yaml).
capacity-dmips-mhz:
$ref: '/schemas/types.yaml#/definitions/uint32'

2
Documentation/devicetree/bindings/arm/fsl.yaml
View File

@ -160,7 +160,7 @@ properties:
items:
- enum:
- armadeus,imx6dl-apf6 # APF6 (Solo) SoM
- armadeus,imx6dl-apf6dldev # APF6 (Solo) SoM on APF6Dev board
- armadeus,imx6dl-apf6dev # APF6 (Solo) SoM on APF6Dev board
- eckelmann,imx6dl-ci4x10
- emtrion,emcon-mx6 # emCON-MX6S or emCON-MX6DL SoM
- emtrion,emcon-mx6-avari # emCON-MX6S or emCON-MX6DL SoM on Avari Base

2
Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt
View File

@ -1,7 +1,7 @@
* Hisilicon Hi3519 System Controller Block
This bindings use the following binding:
Documentation/devicetree/bindings/mfd/syscon.txt
Documentation/devicetree/bindings/mfd/syscon.yaml
Required properties:
- compatible: "hisilicon,hi3519-sysctrl".

2
Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
View File

@ -81,4 +81,4 @@ Example:
};
};
[1]. Documentation/devicetree/bindings/arm/idle-states.txt
[1]. Documentation/devicetree/bindings/arm/idle-states.yaml

2
Documentation/devicetree/bindings/arm/omap/mpu.txt
View File

@ -17,7 +17,7 @@ am335x and am437x only:
- pm-sram: Phandles to ocmcram nodes to be used for power management.
First should be type 'protect-exec' for the driver to use to copy
and run PM functions, second should be regular pool to be used for
data region for code. See Documentation/devicetree/bindings/sram/sram.txt
data region for code. See Documentation/devicetree/bindings/sram/sram.yaml
for more details.
Examples:

36
Documentation/devicetree/bindings/arm/psci.yaml
View File

@ -100,13 +100,14 @@ properties:
bindings in [1]) must specify this property.
[1] Kernel documentation - ARM idle states bindings
Documentation/devicetree/bindings/arm/idle-states.txt
"#power-domain-cells":
description:
The number of cells in a PM domain specifier as per binding in [3].
Must be 0 as to represent a single PM domain.
Documentation/devicetree/bindings/arm/idle-states.yaml
patternProperties:
"^power-domain-":
allOf:
- $ref: "../power/power-domain.yaml#"
type: object
description: |
ARM systems can have multiple cores, sometimes in an hierarchical
arrangement. This often, but not always, maps directly to the processor
power topology of the system. Individual nodes in a topology have their
@ -122,14 +123,8 @@ properties:
helps to implement support for OSI mode and OS implementations may choose
to mandate it.
[3] Documentation/devicetree/bindings/power/power_domain.txt
[4] Documentation/devicetree/bindings/power/domain-idle-state.txt
power-domains:
$ref: '/schemas/types.yaml#/definitions/phandle-array'
description:
List of phandles and PM domain specifiers, as defined by bindings of the
PM domain provider.
[3] Documentation/devicetree/bindings/power/power-domain.yaml
[4] Documentation/devicetree/bindings/power/domain-idle-state.yaml
required:
- compatible
@ -199,7 +194,7 @@ examples:
CPU0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
compatible = "arm,cortex-a53";
reg = <0x0>;
enable-method = "psci";
power-domains = <&CPU_PD0>;
@ -208,7 +203,7 @@ examples:
CPU1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a57", "arm,armv8";
compatible = "arm,cortex-a53";
reg = <0x100>;
enable-method = "psci";
power-domains = <&CPU_PD1>;
@ -224,6 +219,9 @@ examples:
exit-latency-us = <10>;
min-residency-us = <100>;
};
};
domain-idle-states {
CLUSTER_RET: cluster-retention {
compatible = "domain-idle-state";
@ -247,19 +245,19 @@ examples:
compatible = "arm,psci-1.0";
method = "smc";
CPU_PD0: cpu-pd0 {
CPU_PD0: power-domain-cpu0 {
#power-domain-cells = <0>;
domain-idle-states = <&CPU_PWRDN>;
power-domains = <&CLUSTER_PD>;
};
CPU_PD1: cpu-pd1 {
CPU_PD1: power-domain-cpu1 {
#power-domain-cells = <0>;
domain-idle-states = <&CPU_PWRDN>;
power-domains = <&CLUSTER_PD>;
};
CLUSTER_PD: cluster-pd {
CLUSTER_PD: power-domain-cluster {
#power-domain-cells = <0>;
domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
};

2
Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
View File

@ -52,7 +52,7 @@ required:
examples:
- |
mlahb: ahb {
mlahb: ahb@38000000 {
compatible = "st,mlahb", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;

1
Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
View File

@ -70,7 +70,6 @@ examples:
#size-cells = <0>;
pmic@3e3 {
compatible = "...";
reg = <0x3e3>;
/* ... */

2
Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
View File

@ -40,7 +40,7 @@ additionalProperties: false
examples:
- |
osc24M: clk@01c20050 {
osc24M: clk@1c20050 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-osc-clk";
reg = <0x01c20050 0x4>;

2
Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
View File

@ -41,7 +41,7 @@ additionalProperties: false
examples:
- |
clk@0600005c {
clk@600005c {
#clock-cells = <0>;
compatible = "allwinner,sun9i-a80-gt-clk";
reg = <0x0600005c 0x4>;

2
Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
View File

@ -42,7 +42,7 @@ properties:
be part of GCC and hence the TSENS properties can also be part
of the GCC/clock-controller node.
For more details on the TSENS properties please refer
Documentation/devicetree/bindings/thermal/qcom-tsens.txt
Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
nvmem-cell-names:
minItems: 1

6
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
View File

@ -49,11 +49,7 @@ examples:
resets = <&tcon_ch0_clk 0>;
port {
#address-cells = <1>;
#size-cells = <0>;
tve0_in_tcon0: endpoint@0 {
reg = <0>;
tve0_in_tcon0: endpoint {
remote-endpoint = <&tcon0_out_tve0>;
};
};

10
Documentation/devicetree/bindings/display/bridge/anx6345.yaml
View File

@ -79,21 +79,15 @@ examples:
#size-cells = <0>;
anx6345_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
anx6345_in_tcon0: endpoint@0 {
reg = <0>;
anx6345_in_tcon0: endpoint {
remote-endpoint = <&tcon0_out_anx6345>;
};
};
anx6345_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
anx6345_out_panel: endpoint@0 {
reg = <0>;
anx6345_out_panel: endpoint {
remote-endpoint = <&panel_in_edp>;
};
};

2
Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
View File

@ -37,6 +37,8 @@ examples:
dsi@ff450000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0xff450000 0x1000>;
panel@0 {
compatible = "leadtek,ltk500hd1829";
reg = <0>;

2
Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
View File

@ -37,6 +37,8 @@ examples:
dsi@ff450000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0xff450000 0x1000>;
panel@0 {
compatible = "xinpeng,xpp055c272";
reg = <0>;

6
Documentation/devicetree/bindings/display/simple-framebuffer.yaml
View File

@ -174,10 +174,6 @@ examples:
};
};
soc@1c00000 {
lcdc0: lcdc@1c0c000 {
compatible = "allwinner,sun4i-a10-lcdc";
};
};
lcdc0: lcdc { };
...

2
Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
View File

@ -37,7 +37,7 @@ Optional nodes:
supports a single port with a single endpoint.
- See also Documentation/devicetree/bindings/display/tilcdc/panel.txt and
Documentation/devicetree/bindings/display/tilcdc/tfp410.txt for connecting
Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt for connecting
tfp410 DVI encoder or lcd panel to lcdc
[1] There is an errata about AM335x color wiring. For 16-bit color mode

14
Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
View File

@ -143,7 +143,7 @@ examples:
#size-cells = <2>;
dma-coherent;
dma-ranges;
ranges;
ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0x05000000>;
ti,sci-dev-id = <118>;
@ -169,16 +169,4 @@ examples:
ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */
};
};
mcasp0: mcasp@02B00000 {
dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
dma-names = "tx", "rx";
};
crypto: crypto@4E00000 {
compatible = "ti,sa2ul-crypto";
dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, <&main_udmap 0x4001>;
dma-names = "tx", "rx1", "rx2";
};
};

14
Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
View File

@ -84,31 +84,31 @@ examples:
gpu_opp_table: opp_table0 {
compatible = "operating-points-v2";
opp@533000000 {
opp-533000000 {
opp-hz = /bits/ 64 <533000000>;
opp-microvolt = <1250000>;
};
opp@450000000 {
opp-450000000 {
opp-hz = /bits/ 64 <450000000>;
opp-microvolt = <1150000>;
};
opp@400000000 {
opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1125000>;
};
opp@350000000 {
opp-350000000 {
opp-hz = /bits/ 64 <350000000>;
opp-microvolt = <1075000>;
};
opp@266000000 {
opp-266000000 {
opp-hz = /bits/ 64 <266000000>;
opp-microvolt = <1025000>;
};
opp@160000000 {
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-microvolt = <925000>;
};
opp@100000000 {
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <912500>;
};

14
Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
View File

@ -138,31 +138,31 @@ examples:
gpu_opp_table: opp_table0 {
compatible = "operating-points-v2";
opp@533000000 {
opp-533000000 {
opp-hz = /bits/ 64 <533000000>;
opp-microvolt = <1250000>;
};
opp@450000000 {
opp-450000000 {
opp-hz = /bits/ 64 <450000000>;
opp-microvolt = <1150000>;
};
opp@400000000 {
opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1125000>;
};
opp@350000000 {
opp-350000000 {
opp-hz = /bits/ 64 <350000000>;
opp-microvolt = <1075000>;
};
opp@266000000 {
opp-266000000 {
opp-hz = /bits/ 64 <266000000>;
opp-microvolt = <1025000>;
};
opp@160000000 {
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-microvolt = <925000>;
};
opp@100000000 {
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <912500>;
};

2
Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
View File

@ -123,7 +123,7 @@ examples:
samsung,syscon-phandle = <&pmu_system_controller>;
/* NTC thermistor is a hwmon device */
ncp15wb473@0 {
ncp15wb473 {
compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <47000>;

2
Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
View File

@ -62,7 +62,7 @@ required:
examples:
- |
i2c@00000000 {
i2c {
#address-cells = <1>;
#size-cells = <0>;
gt928@5d {

2
Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
View File

@ -1,7 +1,7 @@
Texas Instruments TWL family (twl4030) pwrbutton module
This module is part of the TWL4030. For more details about the whole
chip see Documentation/devicetree/bindings/mfd/twl-familly.txt.
chip see Documentation/devicetree/bindings/mfd/twl-family.txt.
This module provides a simple power button event via an Interrupt.

2
Documentation/devicetree/bindings/leds/common.yaml
View File

@ -85,7 +85,7 @@ properties:
# LED will act as a back-light, controlled by the framebuffer system
- backlight
# LED will turn on (but for leds-gpio see "default-state" property in
# Documentation/devicetree/bindings/leds/leds-gpio.txt)
# Documentation/devicetree/bindings/leds/leds-gpio.yaml)
- default-on
# LED "double" flashes at a load average based rate
- heartbeat

2
Documentation/devicetree/bindings/leds/register-bit-led.txt
View File

@ -5,7 +5,7 @@ where single bits in a certain register can turn on/off a
single LED. The register bit LEDs appear as children to the
syscon device, with the proper compatible string. For the
syscon bindings see:
Documentation/devicetree/bindings/mfd/syscon.txt
Documentation/devicetree/bindings/mfd/syscon.yaml
Each LED is represented as a sub-node of the syscon device. Each
node's name represents the name of the corresponding LED.

2
Documentation/devicetree/bindings/media/ti,cal.yaml
View File

@ -177,7 +177,7 @@ examples:
};
};
i2c5: i2c@4807c000 {
i2c {
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;

2
Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
View File

@ -32,7 +32,7 @@ Required only for "ti,emif-am3352" and "ti,emif-am4372":
- sram : Phandles for generic sram driver nodes,
first should be type 'protect-exec' for the driver to use to copy
and run PM functions, second should be regular pool to be used for
data region for code. See Documentation/devicetree/bindings/sram/sram.txt
data region for code. See Documentation/devicetree/bindings/sram/sram.yaml
for more details.
Optional properties:

4
Documentation/devicetree/bindings/mfd/max77650.yaml
View File

@ -97,14 +97,14 @@ examples:
regulators {
compatible = "maxim,max77650-regulator";
max77650_ldo: regulator@0 {
max77650_ldo: regulator-ldo {
regulator-compatible = "ldo";
regulator-name = "max77650-ldo";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <2937500>;
};
max77650_sbb0: regulator@1 {
max77650_sbb0: regulator-sbb0 {
regulator-compatible = "sbb0";
regulator-name = "max77650-sbb0";
regulator-min-microvolt = <800000>;

4
Documentation/devicetree/bindings/mfd/tps65910.txt
View File

@ -26,8 +26,8 @@ Required properties:
ldo6, ldo7, ldo8
- xxx-supply: Input voltage supply regulator.
These entries are require if regulators are enabled for a device. Missing of these
properties can cause the regulator registration fails.
These entries are required if regulators are enabled for a device. Missing these
properties can cause the regulator registration to fail.
If some of input supply is powered through battery or always-on supply then
also it is require to have these parameters with proper node handle of always
on power supply.

0
Documentation/devicetree/bindings/mfd/twl-familly.txt → Documentation/devicetree/bindings/mfd/twl-family.txt
View File

2
Documentation/devicetree/bindings/mfd/zii,rave-sp.txt
View File

@ -20,7 +20,7 @@ RAVE SP consists of the following sub-devices:
Device Description
------ -----------
rave-sp-wdt : Watchdog
rave-sp-nvmem : Interface to onborad EEPROM
rave-sp-nvmem : Interface to onboard EEPROM
rave-sp-backlight : Display backlight
rave-sp-hwmon : Interface to onboard hardware sensors
rave-sp-leds : Interface to onboard LEDs

2
Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
View File

@ -26,7 +26,7 @@ For generic IOMMU bindings, see
Documentation/devicetree/bindings/iommu/iommu.txt.
For arm-smmu binding, see:
Documentation/devicetree/bindings/iommu/arm,smmu.txt.
Documentation/devicetree/bindings/iommu/arm,smmu.yaml.
Required properties:

1
Documentation/devicetree/bindings/mmc/mmc-controller.yaml
View File

@ -370,6 +370,7 @@ examples:
mmc3: mmc@1c12000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1c12000 0x200>;
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>;
vmmc-supply = <&reg_vmmc3>;

2
Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
View File

@ -27,7 +27,7 @@ Required properties of NAND chips:
- reg: shall contain the native Chip Select ids from 0 to max supported by
the cadence nand flash controller
See Documentation/devicetree/bindings/mtd/nand.txt for more details on
See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on
generic bindings.
Example:

2
Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
View File

@ -45,7 +45,7 @@ Optional properties:
switch queue
- resets: a single phandle and reset identifier pair. See
Documentation/devicetree/binding/reset/reset.txt for details.
Documentation/devicetree/bindings/reset/reset.txt for details.
- reset-names: If the "reset" property is specified, this property should have
the value "switch" to denote the switch reset line.

2
Documentation/devicetree/bindings/nvmem/nvmem.yaml
View File

@ -76,6 +76,8 @@ examples:
qfprom: eeprom@700000 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x00700000 0x100000>;
wp-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
/* ... */

2
Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
View File

@ -86,7 +86,7 @@ examples:
#include <dt-bindings/clock/sun4i-a10-ccu.h>
#include <dt-bindings/reset/sun4i-a10-ccu.h>
usbphy: phy@01c13400 {
usbphy: phy@1c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun4i-a10-usb-phy";
reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;

2
Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
View File

@ -17,7 +17,7 @@ description: |+
"aspeed,ast2400-scu", "syscon", "simple-mfd"
Refer to the the bindings described in
Documentation/devicetree/bindings/mfd/syscon.txt
Documentation/devicetree/bindings/mfd/syscon.yaml
properties:
compatible:

2
Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
View File

@ -18,7 +18,7 @@ description: |+
"aspeed,g5-scu", "syscon", "simple-mfd"
Refer to the the bindings described in
Documentation/devicetree/bindings/mfd/syscon.txt
Documentation/devicetree/bindings/mfd/syscon.yaml
properties:
compatible:

2
Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
View File

@ -17,7 +17,7 @@ description: |+
"aspeed,ast2600-scu", "syscon", "simple-mfd"
Refer to the the bindings described in
Documentation/devicetree/bindings/mfd/syscon.txt
Documentation/devicetree/bindings/mfd/syscon.yaml
properties:
compatible:

2
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
View File

@ -248,7 +248,7 @@ examples:
};
//Example 3 pin groups
pinctrl@60020000 {
pinctrl {
usart1_pins_a: usart1-0 {
pins1 {
pinmux = <STM32_PINMUX('A', 9, AF7)>;

2
Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
View File

@ -18,7 +18,7 @@ description: |+
"amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
Refer to the the bindings described in
Documentation/devicetree/bindings/mfd/syscon.txt
Documentation/devicetree/bindings/mfd/syscon.yaml
properties:
compatible:

33
Documentation/devicetree/bindings/power/domain-idle-state.txt
View File

@ -1,33 +0,0 @@
PM Domain Idle State Node:
A domain idle state node represents the state parameters that will be used to
select the state when there are no active components in the domain.
The state node has the following parameters -
- compatible:
Usage: Required
Value type: <string>
Definition: Must be "domain-idle-state".
- entry-latency-us
Usage: Required
Value type: <prop-encoded-array>
Definition: u32 value representing worst case latency in
microseconds required to enter the idle state.
The exit-latency-us duration may be guaranteed
only after entry-latency-us has passed.
- exit-latency-us
Usage: Required
Value type: <prop-encoded-array>
Definition: u32 value representing worst case latency
in microseconds required to exit the idle state.
- min-residency-us
Usage: Required
Value type: <prop-encoded-array>
Definition: u32 value representing minimum residency duration
in microseconds after which the idle state will yield
power benefits after overcoming the overhead in entering
i the idle state.

64
Documentation/devicetree/bindings/power/domain-idle-state.yaml Normal file
View File

@ -0,0 +1,64 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/power/domain-idle-state.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: PM Domain Idle States binding description
maintainers:
- Ulf Hansson <ulf.hansson@linaro.org>
description:
A domain idle state node represents the state parameters that will be used to
select the state when there are no active components in the PM domain.
properties:
$nodename:
const: domain-idle-states
patternProperties:
"^(cpu|cluster|domain)-":
type: object
description:
Each state node represents a domain idle state description.
properties:
compatible:
const: domain-idle-state
entry-latency-us:
description:
The worst case latency in microseconds required to enter the idle
state. Note that, the exit-latency-us duration may be guaranteed only
after the entry-latency-us has passed.
exit-latency-us:
description:
The worst case latency in microseconds required to exit the idle
state.
min-residency-us:
description:
The minimum residency duration in microseconds after which the idle
state will yield power benefits, after overcoming the overhead while
entering the idle state.
required:
- compatible
- entry-latency-us
- exit-latency-us
- min-residency-us
examples:
- |
domain-idle-states {
domain_retention: domain-retention {
compatible = "domain-idle-state";
entry-latency-us = <20>;
exit-latency-us = <40>;
min-residency-us = <80>;
};
};
...

24
Documentation/devicetree/bindings/power/power-domain.yaml
View File

@ -25,22 +25,20 @@ description: |+
properties:
$nodename:
pattern: "^(power-controller|power-domain)(@.*)?$"
pattern: "^(power-controller|power-domain)([@-].*)?$"
domain-idle-states:
$ref: /schemas/types.yaml#/definitions/phandle-array
description:
A phandle of an idle-state that shall be soaked into a generic domain
power state. The idle state definitions are compatible with
domain-idle-state specified in
Documentation/devicetree/bindings/power/domain-idle-state.txt
phandles that are not compatible with domain-idle-state will be ignored.
The domain-idle-state property reflects the idle state of this PM domain
and not the idle states of the devices or sub-domains in the PM domain.
Devices and sub-domains have their own idle-states independent
of the parent domain's idle states. In the absence of this property,
the domain would be considered as capable of being powered-on
or powered-off.
description: |
Phandles of idle states that defines the available states for the
power-domain provider. The idle state definitions are compatible with the
domain-idle-state bindings, specified in ./domain-idle-state.yaml.
Note that, the domain-idle-state property reflects the idle states of this
PM domain and not the idle states of the devices or sub-domains in the PM
domain. Devices and sub-domains have their own idle states independent of
the parent domain's idle states. In the absence of this property, the
domain would be considered as capable of being powered-on or powered-off.
operating-points-v2:
$ref: /schemas/types.yaml#/definitions/phandle-array

2
Documentation/devicetree/bindings/power/power_domain.txt
View File

@ -109,4 +109,4 @@ Example:
required-opps = <&domain1_opp_1>;
};
[1]. Documentation/devicetree/bindings/power/domain-idle-state.txt
[1]. Documentation/devicetree/bindings/power/domain-idle-state.yaml

2
Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
View File

@ -161,7 +161,7 @@ The regulator node houses sub-nodes for each regulator within the device. Each
sub-node is identified using the node's name, with valid values listed for each
of the PMICs below.
pm8005:
pm8004:
s2, s5
pm8005:

2
Documentation/devicetree/bindings/regulator/regulator.yaml
View File

@ -191,7 +191,7 @@ patternProperties:
examples:
- |
xyzreg: regulator@0 {
xyzreg: regulator {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;

6
Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
View File

@ -23,7 +23,11 @@ properties:
description: Global reset register offset and bit offset.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- maxItems: 2
items:
- description: Register offset
- description: Register bit offset
minimum: 0
maximum: 31
"#reset-cells":
minimum: 2

2
Documentation/devicetree/bindings/reset/st,stm32mp1-rcc.txt
View File

@ -3,4 +3,4 @@ STMicroelectronics STM32MP1 Peripheral Reset Controller
The RCC IP is both a reset and a clock controller.
Please see Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt
Please see Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml

2
Documentation/devicetree/bindings/sound/st,stm32-sai.txt
View File

@ -36,7 +36,7 @@ SAI subnodes required properties:
- clock-names: Must contain "sai_ck".
Must also contain "MCLK", if SAI shares a master clock,
with a SAI set as MCLK clock provider.
- dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt
- dmas: see Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
- dma-names: identifier string for each DMA request line
"tx": if sai sub-block is configured as playback DAI
"rx": if sai sub-block is configured as capture DAI

2
Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt
View File

@ -10,7 +10,7 @@ Required properties:
- clock-names: must contain "kclk"
- interrupts: cpu DAI interrupt line
- dmas: DMA specifiers for audio data DMA and iec control flow DMA
See STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt
See STM32 DMA bindings, Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
- dma-names: two dmas have to be defined, "rx" and "rx-ctrl"
Optional properties:

2
Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
View File

@ -49,7 +49,7 @@ properties:
dmas:
description: |
DMA specifiers for tx and rx dma. DMA fifo mode must be used. See
the STM32 DMA bindings Documentation/devicetree/bindings/dma/stm32-dma.txt.
the STM32 DMA bindings Documentation/devicetree/bindings/dma/st,stm32-dma.yaml.
items:
- description: rx DMA channel
- description: tx DMA channel

2
Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
View File

@ -125,7 +125,7 @@ examples:
#size-cells = <1>;
ranges;
sram_a: sram@00000000 {
sram_a: sram@0 {
compatible = "mmio-sram";
reg = <0x00000000 0xc000>;
#address-cells = <1>;

2
Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
View File

@ -17,7 +17,7 @@ description: |+
"brcm,bcm2711-avs-monitor", "syscon", "simple-mfd"
Refer to the the bindings described in
Documentation/devicetree/bindings/mfd/syscon.txt
Documentation/devicetree/bindings/mfd/syscon.yaml
properties:
compatible:

2
Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
View File

@ -87,7 +87,7 @@ additionalProperties: false
examples:
- |
timer {
timer@1c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x400>;
interrupts = <22>,

14
Documentation/driver-api/dmaengine/client.rst
View File

@ -151,8 +151,8 @@ The details of these operations are:
Note that callbacks will always be invoked from the DMA
engines tasklet, never from interrupt context.
Optional: per descriptor metadata
---------------------------------
**Optional: per descriptor metadata**
DMAengine provides two ways for metadata support.
DESC_METADATA_CLIENT
@ -199,12 +199,15 @@ Optional: per descriptor metadata
DESC_METADATA_CLIENT
- DMA_MEM_TO_DEV / DEV_MEM_TO_MEM:
1. prepare the descriptor (dmaengine_prep_*)
construct the metadata in the client's buffer
2. use dmaengine_desc_attach_metadata() to attach the buffer to the
descriptor
3. submit the transfer
- DMA_DEV_TO_MEM:
1. prepare the descriptor (dmaengine_prep_*)
2. use dmaengine_desc_attach_metadata() to attach the buffer to the
descriptor
@ -215,6 +218,7 @@ Optional: per descriptor metadata
DESC_METADATA_ENGINE
- DMA_MEM_TO_DEV / DEV_MEM_TO_MEM:
1. prepare the descriptor (dmaengine_prep_*)
2. use dmaengine_desc_get_metadata_ptr() to get the pointer to the
engine's metadata area
@ -222,7 +226,9 @@ Optional: per descriptor metadata
4. use dmaengine_desc_set_metadata_len() to tell the DMA engine the
amount of data the client has placed into the metadata buffer
5. submit the transfer
- DMA_DEV_TO_MEM:
1. prepare the descriptor (dmaengine_prep_*)
2. submit the transfer
3. on transfer completion, use dmaengine_desc_get_metadata_ptr() to get
@ -278,8 +284,8 @@ Optional: per descriptor metadata
void dma_async_issue_pending(struct dma_chan *chan);
Further APIs:
-------------
Further APIs
------------
1. Terminate APIs

6
Documentation/filesystems/debugfs.txt
View File

@ -164,9 +164,9 @@ file.
void __iomem *base;
};
struct dentry *debugfs_create_regset32(const char *name, umode_t mode,
struct dentry *parent,
struct debugfs_regset32 *regset);
debugfs_create_regset32(const char *name, umode_t mode,
struct dentry *parent,
struct debugfs_regset32 *regset);
void debugfs_print_regs32(struct seq_file *s, struct debugfs_reg32 *regs,
int nregs, void __iomem *base, char *prefix);

3
Documentation/hwmon/adm1177.rst
View File

@ -20,8 +20,7 @@ Usage Notes
-----------
This driver does not auto-detect devices. You will have to instantiate the
devices explicitly. Please see Documentation/i2c/instantiating-devices for
details.
devices explicitly. Please see :doc:`/i2c/instantiating-devices` for details.
Sysfs entries

5
Documentation/kbuild/makefiles.rst
View File

@ -765,7 +765,7 @@ is not sufficient this sometimes needs to be explicit.
Example::
#arch/x86/boot/Makefile
subdir- := compressed/
subdir- := compressed
The above assignment instructs kbuild to descend down in the
directory compressed/ when "make clean" is executed.
@ -1379,9 +1379,6 @@ See subsequent chapter for the syntax of the Kbuild file.
in arch/$(ARCH)/include/(uapi/)/asm, Kbuild will automatically generate
a wrapper of the asm-generic one.
The convention is to list one subdir per line and
preferably in alphabetic order.
8 Kbuild Variables
==================

5
Documentation/networking/phy.rst
View File

@ -487,8 +487,9 @@ phy_register_fixup_for_id()::
The stubs set one of the two matching criteria, and set the other one to
match anything.
When phy_register_fixup() or \*_for_uid()/\*_for_id() is called at module,
unregister fixup and free allocate memory are required.
When phy_register_fixup() or \*_for_uid()/\*_for_id() is called at module load
time, the module needs to unregister the fixup and free allocated memory when
it's unloaded.
Call one of following function before unloading module::

1
Documentation/power/index.rst
View File

@ -13,7 +13,6 @@ Power Management
drivers-testing
energy-model
freezing-of-tasks
interface
opp
pci
pm_qos_interface

2
Documentation/sphinx/parallel-wrapper.sh
View File

@ -30,4 +30,4 @@ if [ -n "$parallel" ] ; then
parallel="-j$parallel"
fi
exec "$sphinx" "$parallel" "$@"
exec "$sphinx" $parallel "$@"

33
Documentation/virt/kvm/api.rst
View File

@ -4611,35 +4611,38 @@ unpins the VPA pages and releases all the device pages that are used to
track the secure pages by hypervisor.
4.122 KVM_S390_NORMAL_RESET
---------------------------
Capability: KVM_CAP_S390_VCPU_RESETS
Architectures: s390
Type: vcpu ioctl
Parameters: none
Returns: 0
:Capability: KVM_CAP_S390_VCPU_RESETS
:Architectures: s390
:Type: vcpu ioctl
:Parameters: none
:Returns: 0
This ioctl resets VCPU registers and control structures according to
the cpu reset definition in the POP (Principles Of Operation).
4.123 KVM_S390_INITIAL_RESET
----------------------------
Capability: none
Architectures: s390
Type: vcpu ioctl
Parameters: none
Returns: 0
:Capability: none
:Architectures: s390
:Type: vcpu ioctl
:Parameters: none
:Returns: 0
This ioctl resets VCPU registers and control structures according to
the initial cpu reset definition in the POP. However, the cpu is not
put into ESA mode. This reset is a superset of the normal reset.
4.124 KVM_S390_CLEAR_RESET
--------------------------
Capability: KVM_CAP_S390_VCPU_RESETS
Architectures: s390
Type: vcpu ioctl
Parameters: none
Returns: 0
:Capability: KVM_CAP_S390_VCPU_RESETS
:Architectures: s390
:Type: vcpu ioctl
:Parameters: none
:Returns: 0
This ioctl resets VCPU registers and control structures according to
the clear cpu reset definition in the POP. However, the cpu is not put

1
Documentation/x86/index.rst
View File

@ -19,7 +19,6 @@ x86-specific Documentation
tlb
mtrr
pat
intel_mpx
intel-iommu
intel_txt
amd-memory-encryption

29
MAINTAINERS
View File

@ -693,7 +693,7 @@ ALLWINNER CPUFREQ DRIVER
M: Yangtao Li <tiny.windzz@gmail.com>
L: linux-pm@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt
F: Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
F: drivers/cpufreq/sun50i-cpufreq-nvmem.c
ALLWINNER CRYPTO DRIVERS
@ -4017,7 +4017,7 @@ M: Cheng-Yi Chiang <cychiang@chromium.org>
S: Maintained
R: Enric Balletbo i Serra <enric.balletbo@collabora.com>
R: Guenter Roeck <groeck@chromium.org>
F: Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt
F: Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
F: sound/soc/codecs/cros_ec_codec.*
CIRRUS LOGIC AUDIO CODEC DRIVERS
@ -4475,7 +4475,7 @@ L: linux-media@vger.kernel.org
T: git git://linuxtv.org/media_tree.git
S: Maintained
F: drivers/media/platform/sunxi/sun6i-csi/
F: Documentation/devicetree/bindings/media/sun6i-csi.txt
F: Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
CW1200 WLAN driver
M: Solomon Peachy <pizza@shaftnet.org>
@ -5668,7 +5668,7 @@ L: dri-devel@lists.freedesktop.org
T: git git://anongit.freedesktop.org/drm/drm-misc
S: Maintained
F: drivers/gpu/drm/stm
F: Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
F: Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
DRM DRIVERS FOR TI LCDC
M: Jyri Sarha <jsarha@ti.com>
@ -7738,7 +7738,7 @@ Hyper-V CORE AND DRIVERS
M: "K. Y. Srinivasan" <kys@microsoft.com>
M: Haiyang Zhang <haiyangz@microsoft.com>
M: Stephen Hemminger <sthemmin@microsoft.com>
M: Sasha Levin <sashal@kernel.org>
M: Wei Liu <wei.liu@kernel.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux.git
L: linux-hyperv@vger.kernel.org
S: Supported
@ -10164,7 +10164,7 @@ MAXBOTIX ULTRASONIC RANGER IIO DRIVER
M: Andreas Klinger <ak@it-klinger.de>
L: linux-iio@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.txt
F: Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml
F: drivers/iio/proximity/mb1232.c
MAXIM MAX77650 PMIC MFD DRIVER
@ -10467,7 +10467,7 @@ M: Hugues Fruchet <hugues.fruchet@st.com>
L: linux-media@vger.kernel.org
T: git git://linuxtv.org/media_tree.git
S: Supported
F: Documentation/devicetree/bindings/media/st,stm32-dcmi.txt
F: Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
F: drivers/media/platform/stm32/stm32-dcmi.c
MEDIA DRIVERS FOR NVIDIA TEGRA - VDE
@ -11115,14 +11115,12 @@ S: Maintained
F: drivers/usb/image/microtek.*
MIPS
M: Ralf Baechle <ralf@linux-mips.org>
M: Paul Burton <paulburton@kernel.org>
M: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
L: linux-mips@vger.kernel.org
W: http://www.linux-mips.org/
T: git git://git.linux-mips.org/pub/scm/ralf/linux.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git
Q: http://patchwork.linux-mips.org/project/linux-mips/list/
S: Supported
S: Maintained
F: Documentation/devicetree/bindings/mips/
F: Documentation/mips/
F: arch/mips/
@ -12741,7 +12739,7 @@ M: Tom Joseph <tjoseph@cadence.com>
L: linux-pci@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/pci/cdns,*.txt
F: drivers/pci/controller/pcie-cadence*
F: drivers/pci/controller/cadence/
PCI DRIVER FOR FREESCALE LAYERSCAPE
M: Minghuan Lian <minghuan.Lian@nxp.com>
@ -12954,7 +12952,6 @@ M: Robert Richter <rrichter@marvell.com>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: Documentation/devicetree/bindings/pci/pci-thunder-*
F: drivers/pci/controller/pci-thunder-*
PCIE DRIVER FOR HISILICON
@ -14229,7 +14226,7 @@ F: include/dt-bindings/reset/
F: include/linux/reset.h
F: include/linux/reset/
F: include/linux/reset-controller.h
K: \b(?:devm_|of_)?reset_control(?:ler_[a-z]+|_[a-z_]+)?\b
K: \b(?:devm_|of_)?reset_control(?:ler_[a-z]+|_[a-z_]+)?\b
RESTARTABLE SEQUENCES SUPPORT
M: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
@ -15924,7 +15921,7 @@ F: drivers/*/stm32-*timer*
F: drivers/pwm/pwm-stm32*
F: include/linux/*/stm32-*tim*
F: Documentation/ABI/testing/*timer-stm32
F: Documentation/devicetree/bindings/*/stm32-*timer*
F: Documentation/devicetree/bindings/*/*stm32-*timer*
F: Documentation/devicetree/bindings/pwm/pwm-stm32*
STMMAC ETHERNET DRIVER
@ -16083,6 +16080,8 @@ SYNOPSYS DESIGNWARE 8250 UART DRIVER
R: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
S: Maintained
F: drivers/tty/serial/8250/8250_dw.c
F: drivers/tty/serial/8250/8250_dwlib.*
F: drivers/tty/serial/8250/8250_lpss.c
SYNOPSYS DESIGNWARE APB GPIO DRIVER
M: Hoan Tran <hoan@os.amperecomputing.com>

6
Makefile
View File

@ -2,7 +2,7 @@
VERSION = 5
PATCHLEVEL = 6
SUBLEVEL = 0
EXTRAVERSION = -rc3
EXTRAVERSION = -rc5
NAME = Kleptomaniac Octopus
# *DOCUMENTATION*
@ -68,6 +68,7 @@ unexport GREP_OPTIONS
#
# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
# If KBUILD_VERBOSE equals 1 then the above command is displayed.
# If KBUILD_VERBOSE equals 2 then give the reason why each target is rebuilt.
#
# To put more focus on warnings, be less verbose as default
# Use 'make V=1' to see the full commands
@ -1238,7 +1239,7 @@ ifneq ($(dtstree),)
%.dtb: include/config/kernel.release scripts_dtc
$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
PHONY += dtbs dtbs_install dt_binding_check
PHONY += dtbs dtbs_install dtbs_check
dtbs dtbs_check: include/config/kernel.release scripts_dtc
$(Q)$(MAKE) $(build)=$(dtstree)
@ -1258,6 +1259,7 @@ PHONY += scripts_dtc
scripts_dtc: scripts_basic
$(Q)$(MAKE) $(build)=scripts/dtc
PHONY += dt_binding_check
dt_binding_check: scripts_dtc
$(Q)$(MAKE) $(build)=Documentation/devicetree/bindings

5
arch/Kconfig
View File

@ -738,8 +738,9 @@ config HAVE_STACK_VALIDATION
config HAVE_RELIABLE_STACKTRACE
bool
help
Architecture has a save_stack_trace_tsk_reliable() function which
only returns a stack trace if it can guarantee the trace is reliable.
Architecture has either save_stack_trace_tsk_reliable() or
arch_stack_walk_reliable() function which only returns a stack trace
if it can guarantee the trace is reliable.
config HAVE_ARCH_HASH
bool

4
arch/arm/boot/dts/am437x-idk-evm.dts
View File

@ -526,11 +526,11 @@
* Supply voltage supervisor on board will not allow opp50 so
* disable it and set opp100 as suspend OPP.
*/
opp50@300000000 {
opp50-300000000 {
status = "disabled";
};
opp100@600000000 {
opp100-600000000 {
opp-suspend;
};
};

3
arch/arm/boot/dts/bcm2711-rpi-4-b.dts
View File

@ -21,6 +21,7 @@
aliases {
ethernet0 = &genet;
pcie0 = &pcie0;
};
leds {
@ -31,6 +32,8 @@
pwr {
label = "PWR";
gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
default-state = "keep";
linux,default-trigger = "default-on";
};
};

2
arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
View File

@ -26,6 +26,8 @@
pwr {
label = "PWR";
gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
default-state = "keep";
linux,default-trigger = "default-on";
};
};
};

2
arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
View File

@ -27,6 +27,8 @@
pwr {
label = "PWR";
gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
default-state = "keep";
linux,default-trigger = "default-on";
};
};

4
arch/arm/boot/dts/dra7-evm.dts
View File

@ -61,10 +61,10 @@
regulator-max-microvolt = <1800000>;
};
evm_3v3: fixedregulator-evm3v3 {
vsys_3v3: fixedregulator-vsys3v3 {
/* Output of Cntlr A of TPS43351-Q1 on dra7-evm */
compatible = "regulator-fixed";
regulator-name = "evm_3v3";
regulator-name = "vsys_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&evm_12v0>;

4
arch/arm/boot/dts/dra7-l4.dtsi
View File

@ -3474,6 +3474,7 @@
clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 24>;
clock-names = "fck";
interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
ti,timer-pwm;
};
};
@ -3501,6 +3502,7 @@
clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 24>;
clock-names = "fck";
interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
ti,timer-pwm;
};
};
@ -3528,6 +3530,7 @@
clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
clock-names = "fck";
interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
ti,timer-pwm;
};
};
@ -3555,6 +3558,7 @@
clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
clock-names = "fck";
interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
ti,timer-pwm;
};
};

2
arch/arm/boot/dts/dra7.dtsi
View File

@ -184,6 +184,7 @@
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x20013000 0x13000 0 0xffed000>;
dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
@ -238,6 +239,7 @@
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x30013000 0x13000 0 0xffed000>;
dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;

5
arch/arm/boot/dts/dra76x.dtsi
View File

@ -128,3 +128,8 @@
&usb4_tm {
status = "disabled";
};
&mmc3 {
/* dra76x is not affected by i887 */
max-frequency = <96000000>;
};

12
arch/arm/boot/dts/dra7xx-clocks.dtsi
View File

@ -796,16 +796,6 @@
clock-div = <1>;
};
ipu1_gfclk_mux: ipu1_gfclk_mux@520 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>;
ti,bit-shift = <24>;
reg = <0x0520>;
assigned-clocks = <&ipu1_gfclk_mux>;
assigned-clock-parents = <&dpll_core_h22x2_ck>;
};
dummy_ck: dummy_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
@ -1564,6 +1554,8 @@
compatible = "ti,clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
assigned-clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 24>;
assigned-clock-parents = <&dpll_core_h22x2_ck>;
};
ipu_clkctrl: ipu-clkctrl@50 {

4
arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
View File

@ -275,7 +275,7 @@
/* SRAM on Colibri nEXT_CS0 */
sram@0,0 {
compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram";
compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram";
reg = <0 0 0x00010000>;
#address-cells = <1>;
#size-cells = <1>;
@ -286,7 +286,7 @@
/* SRAM on Colibri nEXT_CS1 */
sram@1,0 {
compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram";
compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram";
reg = <1 0 0x00010000>;
#address-cells = <1>;
#size-cells = <1>;

1
arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
View File

@ -192,7 +192,6 @@
pinctrl-0 = <&pinctrl_usdhc4>;
bus-width = <8>;
non-removable;
vmmc-supply = <&vdd_emmc_1p8>;
status = "disabled";
};

1
arch/arm/boot/dts/imx7-colibri.dtsi
View File

@ -336,7 +336,6 @@
assigned-clock-rates = <400000000>;
bus-width = <8>;
fsl,tuning-step = <2>;
max-frequency = <100000000>;
vmmc-supply = <&reg_module_3v3>;
vqmmc-supply = <&reg_DCDC3>;
non-removable;

6
arch/arm/boot/dts/imx7d.dtsi
View File

@ -44,7 +44,7 @@
opp-hz = /bits/ 64 <792000000>;
opp-microvolt = <1000000>;
clock-latency-ns = <150000>;
opp-supported-hw = <0xd>, <0xf>;
opp-supported-hw = <0xd>, <0x7>;
opp-suspend;
};
@ -52,7 +52,7 @@
opp-hz = /bits/ 64 <996000000>;
opp-microvolt = <1100000>;
clock-latency-ns = <150000>;
opp-supported-hw = <0xc>, <0xf>;
opp-supported-hw = <0xc>, <0x7>;
opp-suspend;
};
@ -60,7 +60,7 @@
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1225000>;
clock-latency-ns = <150000>;
opp-supported-hw = <0x8>, <0xf>;
opp-supported-hw = <0x8>, <0x3>;
opp-suspend;
};
};

4
arch/arm/boot/dts/ls1021a.dtsi
View File

@ -747,7 +747,7 @@
};
mdio0: mdio@2d24000 {
compatible = "fsl,etsec2-mdio";
compatible = "gianfar";
device_type = "mdio";
#address-cells = <1>;
#size-cells = <0>;
@ -756,7 +756,7 @@
};
mdio1: mdio@2d64000 {
compatible = "fsl,etsec2-mdio";
compatible = "gianfar";
device_type = "mdio";
#address-cells = <1>;
#size-cells = <0>;

13
arch/arm/boot/dts/motorola-mapphone-common.dtsi
View File

@ -182,6 +182,14 @@
pwm-names = "enable", "direction";
direction-duty-cycle-ns = <10000000>;
};
backlight: backlight {
compatible = "led-backlight";
leds = <&backlight_led>;
brightness-levels = <31 63 95 127 159 191 223 255>;
default-brightness-level = <6>;
};
};
&dss {
@ -205,6 +213,8 @@
vddi-supply = <&lcd_regulator>;
reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
backlight = <&backlight>;
width-mm = <50>;
height-mm = <89>;
@ -393,12 +403,11 @@
ramp-up-us = <1024>;
ramp-down-us = <8193>;
led@0 {
backlight_led: led@0 {
reg = <0>;
led-sources = <2>;
ti,led-mode = <0>;
label = ":backlight";
linux,default-trigger = "backlight";
};
led@1 {

2
arch/arm/boot/dts/r8a7779.dtsi
View File

@ -377,7 +377,7 @@
};
sata: sata@fc600000 {
compatible = "renesas,sata-r8a7779", "renesas,rcar-sata";
compatible = "renesas,sata-r8a7779";
reg = <0xfc600000 0x200000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7779_CLK_SATA>;

1
arch/arm/configs/bcm2835_defconfig
View File

@ -178,6 +178,7 @@ CONFIG_SCHED_TRACER=y
CONFIG_STACK_TRACER=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_TEST_KSTRTOX=y
CONFIG_DEBUG_FS=y
CONFIG_KGDB=y
CONFIG_KGDB_KDB=y
CONFIG_STRICT_DEVMEM=y

1
arch/arm/configs/omap2plus_defconfig
View File

@ -375,6 +375,7 @@ CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_PWM=m
CONFIG_BACKLIGHT_PANDORA=m
CONFIG_BACKLIGHT_GPIO=m
CONFIG_BACKLIGHT_LED=m
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y

1
arch/arm/configs/socfpga_defconfig
View File

@ -157,6 +157,7 @@ CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_FUNCTION_TRACER=y

3
arch/arm/include/asm/kvm_host.h
View File

@ -392,9 +392,6 @@ static inline void kvm_arch_vcpu_put_fp(struct kvm_vcpu *vcpu) {}
static inline void kvm_vcpu_pmu_restore_guest(struct kvm_vcpu *vcpu) {}
static inline void kvm_vcpu_pmu_restore_host(struct kvm_vcpu *vcpu) {}
static inline void kvm_arm_vhe_guest_enter(void) {}
static inline void kvm_arm_vhe_guest_exit(void) {}
#define KVM_BP_HARDEN_UNKNOWN -1
#define KVM_BP_HARDEN_WA_NEEDED 0
#define KVM_BP_HARDEN_NOT_REQUIRED 1

2
arch/arm/mach-imx/Makefile
View File

@ -91,6 +91,8 @@ AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
endif
AFLAGS_resume-imx6.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SOC_IMX6) += resume-imx6.o
obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
obj-$(CONFIG_SOC_IMX1) += mach-imx1.o

4
arch/arm/mach-imx/common.h
View File

@ -109,17 +109,17 @@ void imx_cpu_die(unsigned int cpu);
int imx_cpu_kill(unsigned int cpu);
#ifdef CONFIG_SUSPEND
void v7_cpu_resume(void);
void imx53_suspend(void __iomem *ocram_vbase);
extern const u32 imx53_suspend_sz;
void imx6_suspend(void __iomem *ocram_vbase);
#else
static inline void v7_cpu_resume(void) {}
static inline void imx53_suspend(void __iomem *ocram_vbase) {}
static const u32 imx53_suspend_sz;
static inline void imx6_suspend(void __iomem *ocram_vbase) {}
#endif
void v7_cpu_resume(void);
void imx6_pm_ccm_init(const char *ccm_compat);
void imx6q_pm_init(void);
void imx6dl_pm_init(void);

24
arch/arm/mach-imx/resume-imx6.S Normal file
View File

@ -0,0 +1,24 @@
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright 2014 Freescale Semiconductor, Inc.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/hardware/cache-l2x0.h>
#include "hardware.h"
/*
* The following code must assume it is running from physical address
* where absolute virtual addresses to the data section have to be
* turned into relative ones.
*/
ENTRY(v7_cpu_resume)
bl v7_invalidate_l1
#ifdef CONFIG_CACHE_L2X0
bl l2c310_early_resume
#endif
b cpu_resume
ENDPROC(v7_cpu_resume)

14
arch/arm/mach-imx/suspend-imx6.S
View File

@ -327,17 +327,3 @@ resume:
ret lr
ENDPROC(imx6_suspend)
/*
* The following code must assume it is running from physical address
* where absolute virtual addresses to the data section have to be
* turned into relative ones.
*/
ENTRY(v7_cpu_resume)
bl v7_invalidate_l1
#ifdef CONFIG_CACHE_L2X0
bl l2c310_early_resume
#endif
b cpu_resume
ENDPROC(v7_cpu_resume)

Some files were not shown because too many files have changed in this diff Show More