wl12xx: move some functions from remove_interface() to stop()

Leave only vif-specific deinit stuff in remove_interface().
Move the global deinit (including power_off) to stop().

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
This commit is contained in:
Eliad Peller 2011-10-10 10:12:52 +02:00 committed by Luciano Coelho
parent d6a3cc2ef9
commit baf6277ae9
1 changed files with 83 additions and 74 deletions

View File

@ -1803,7 +1803,83 @@ static int wl1271_op_start(struct ieee80211_hw *hw)
static void wl1271_op_stop(struct ieee80211_hw *hw)
{
struct wl1271 *wl = hw->priv;
int i;
wl1271_debug(DEBUG_MAC80211, "mac80211 stop");
mutex_lock(&wl_list_mutex);
list_del(&wl->list);
/*
* this must be before the cancel_work calls below, so that the work
* functions don't perform further work.
*/
wl->state = WL1271_STATE_OFF;
mutex_unlock(&wl_list_mutex);
wl1271_disable_interrupts(wl);
wl1271_flush_deferred_work(wl);
cancel_delayed_work_sync(&wl->scan_complete_work);
cancel_work_sync(&wl->netstack_work);
cancel_work_sync(&wl->tx_work);
del_timer_sync(&wl->rx_streaming_timer);
cancel_work_sync(&wl->rx_streaming_enable_work);
cancel_work_sync(&wl->rx_streaming_disable_work);
cancel_delayed_work_sync(&wl->elp_work);
/* let's notify MAC80211 about the remaining pending TX frames */
wl12xx_tx_reset(wl, true);
mutex_lock(&wl->mutex);
wl1271_power_off(wl);
wl->band = IEEE80211_BAND_2GHZ;
wl->rx_counter = 0;
wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
wl->tx_blocks_available = 0;
wl->tx_allocated_blocks = 0;
wl->tx_results_count = 0;
wl->tx_packets_count = 0;
wl->time_offset = 0;
wl->vif = NULL;
wl->tx_spare_blocks = TX_HW_BLOCK_SPARE_DEFAULT;
wl->ap_fw_ps_map = 0;
wl->ap_ps_map = 0;
wl->sched_scanning = false;
memset(wl->roles_map, 0, sizeof(wl->roles_map));
memset(wl->links_map, 0, sizeof(wl->links_map));
memset(wl->roc_map, 0, sizeof(wl->roc_map));
wl->active_sta_count = 0;
/* The system link is always allocated */
__set_bit(WL12XX_SYSTEM_HLID, wl->links_map);
/*
* this is performed after the cancel_work calls and the associated
* mutex_lock, so that wl1271_op_add_interface does not accidentally
* get executed before all these vars have been reset.
*/
wl->flags = 0;
wl->tx_blocks_freed = 0;
for (i = 0; i < NUM_TX_QUEUES; i++) {
wl->tx_pkts_freed[i] = 0;
wl->tx_allocated_pkts[i] = 0;
}
wl1271_debugfs_reset(wl);
kfree(wl->fw_status);
wl->fw_status = NULL;
kfree(wl->tx_res_if);
wl->tx_res_if = NULL;
kfree(wl->target_mem_map);
wl->target_mem_map = NULL;
mutex_unlock(&wl->mutex);
}
static u8 wl12xx_get_role_type(struct wl1271 *wl, struct wl12xx_vif *wlvif)
@ -2053,7 +2129,7 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl,
bool reset_tx_queues)
{
struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif);
int ret, i;
int ret;
wl1271_debug(DEBUG_MAC80211, "mac80211 remove interface");
@ -2063,15 +2139,12 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl,
wl1271_info("down");
mutex_lock(&wl_list_mutex);
list_del(&wl->list);
mutex_unlock(&wl_list_mutex);
/* enable dyn ps just in case (if left on due to fw crash etc) */
if (wlvif->bss_type == BSS_TYPE_STA_BSS)
ieee80211_enable_dyn_ps(wl->vif);
ieee80211_enable_dyn_ps(vif);
if (wl->scan.state != WL1271_SCAN_STATE_IDLE) {
if (wl->scan.state != WL1271_SCAN_STATE_IDLE &&
wl->scan_vif == vif) {
wl->scan.state = WL1271_SCAN_STATE_IDLE;
memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch));
wl->scan_vif = NULL;
@ -2104,82 +2177,18 @@ deinit:
wlvif->ap.bcast_hlid = WL12XX_INVALID_LINK_ID;
wlvif->ap.global_hlid = WL12XX_INVALID_LINK_ID;
/*
* this must be before the cancel_work calls below, so that the work
* functions don't perform further work.
*/
wl->state = WL1271_STATE_OFF;
mutex_unlock(&wl->mutex);
wl1271_disable_interrupts(wl);
wl1271_flush_deferred_work(wl);
cancel_delayed_work_sync(&wl->scan_complete_work);
cancel_work_sync(&wl->netstack_work);
cancel_work_sync(&wl->tx_work);
del_timer_sync(&wl->rx_streaming_timer);
cancel_work_sync(&wl->rx_streaming_enable_work);
cancel_work_sync(&wl->rx_streaming_disable_work);
cancel_delayed_work_sync(&wlvif->pspoll_work);
cancel_delayed_work_sync(&wl->elp_work);
mutex_lock(&wl->mutex);
/* let's notify MAC80211 about the remaining pending TX frames */
wl12xx_tx_reset_wlvif(wl, wlvif);
wl12xx_tx_reset(wl, reset_tx_queues);
wl1271_power_off(wl);
wl->band = IEEE80211_BAND_2GHZ;
wl->rx_counter = 0;
wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
wl->tx_blocks_available = 0;
wl->tx_allocated_blocks = 0;
wl->tx_results_count = 0;
wl->tx_packets_count = 0;
wl->time_offset = 0;
wl->bitrate_masks[IEEE80211_BAND_2GHZ] = wl->conf.tx.basic_rate;
wl->bitrate_masks[IEEE80211_BAND_5GHZ] = wl->conf.tx.basic_rate_5;
wl->vif = NULL;
wl->tx_spare_blocks = TX_HW_BLOCK_SPARE_DEFAULT;
wl1271_free_ap_keys(wl, wlvif);
memset(wlvif->ap.sta_hlid_map, 0, sizeof(wlvif->ap.sta_hlid_map));
wl->ap_fw_ps_map = 0;
wl->ap_ps_map = 0;
wl->sched_scanning = false;
wlvif->role_id = WL12XX_INVALID_ROLE_ID;
wlvif->dev_role_id = WL12XX_INVALID_ROLE_ID;
memset(wl->roles_map, 0, sizeof(wl->roles_map));
memset(wl->links_map, 0, sizeof(wl->links_map));
memset(wl->roc_map, 0, sizeof(wl->roc_map));
wl->active_sta_count = 0;
/* The system link is always allocated */
__set_bit(WL12XX_SYSTEM_HLID, wl->links_map);
mutex_unlock(&wl->mutex);
cancel_delayed_work_sync(&wlvif->pspoll_work);
/*
* this is performed after the cancel_work calls and the associated
* mutex_lock, so that wl1271_op_add_interface does not accidentally
* get executed before all these vars have been reset.
*/
wl->flags = 0;
wl->tx_blocks_freed = 0;
for (i = 0; i < NUM_TX_QUEUES; i++) {
wl->tx_pkts_freed[i] = 0;
wl->tx_allocated_pkts[i] = 0;
}
wl1271_debugfs_reset(wl);
kfree(wl->fw_status);
wl->fw_status = NULL;
kfree(wl->tx_res_if);
wl->tx_res_if = NULL;
kfree(wl->target_mem_map);
wl->target_mem_map = NULL;
mutex_lock(&wl->mutex);
}
static void wl1271_op_remove_interface(struct ieee80211_hw *hw,