UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

arm-soc: soc-specific updates 

This is a larger set of new functionality for the existing SoC families,
 including:
 
 * vt8500 gains support for new CPU cores, notably the Cortex-A9 based wm8850
 * prima2 gains support for the "marco" SoC family, its SMP based cousin
 * tegra gains support for the new Tegra4 (Tegra114) family
 * socfpga now supports a newer version of the hardware including SMP
 * i.mx31 and bcm2835 are now using DT probing for their clocks
 * lots of updates for sh-mobile
 * OMAP updates for clocks, power management and USB
 * i.mx6q and tegra now support cpuidle
 * kirkwood now supports PCIe hot plugging
 * tegra clock support is updated
 * tegra USB PHY probing gets implemented diffently
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUSUyPGCrR//JCVInAQI4YA/+Nb0FaA7qMmTPuJhm7aZNfnwBcGxZ7IZp
 s2xByEl3r5zbLKlKGNGE0x7Q7ETHV4y9tohzi9ZduH2b60dMRYgII06CEmDPu6/h
 4vBap2oLzfWfs9hwpCIh7N9wNzxSj/R42vlXHhNmspHlw7cFk1yw5EeJ+ocxmZPq
 H9lyjAxsGErkZyM/xstNQ1Uvhc8XHAFSUzWrg8hvf6AVVR8hwpIqVzfIizv6Vpk6
 ryBoUBHfdTztAOrafK54CdRc7l6kVMomRodKGzMyasnBK3ZfFca3IR7elnxLyEFJ
 uPDu5DKOdYrjXC8X2dPM6kYiE41YFuqOV2ahBt9HqRe6liNBLHQ6NAH7f7+jBWSI
 eeWe84c2vFaqhAGlci/xm4GaP0ud5ZLudtiVPlDY5tYIADqLygNcx1HIt/5sT7QI
 h34LMjc4+/TGVWTVf5yRmIzTrCXZv5YoAak3UWFoM4nVBo/eYVyNLEt5g9YsfjrC
 P/GWrXJJvOCB3gAi31pgGYJzZg8K7kTTAh/dgxjqzU4f6nGRm5PBydiJe18/lWkH
 qtfNE0RbhxCi3JEBnxW48AIEndVSRbd7jf8upC/s9rPURtFSVXp4APTHVyNUKCip
 gojBxcRYtesyG/53nrwdTyiyHx6GocmWnMNZJoDo0UQEkog2dOef+StdC3zhc2Vm
 9EttcFqWJ+E=
 =PRrg
 -----END PGP SIGNATURE-----

Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC-specific updates from Arnd Bergmann:
 "This is a larger set of new functionality for the existing SoC
  families, including:

   - vt8500 gains support for new CPU cores, notably the Cortex-A9 based
     wm8850

   - prima2 gains support for the "marco" SoC family, its SMP based
     cousin

   - tegra gains support for the new Tegra4 (Tegra114) family

   - socfpga now supports a newer version of the hardware including SMP

   - i.mx31 and bcm2835 are now using DT probing for their clocks

   - lots of updates for sh-mobile

   - OMAP updates for clocks, power management and USB

   - i.mx6q and tegra now support cpuidle

   - kirkwood now supports PCIe hot plugging

   - tegra clock support is updated

   - tegra USB PHY probing gets implemented diffently"

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits)
  ARM: prima2: remove duplicate v7_invalidate_l1
  ARM: shmobile: r8a7779: Correct TMU clock support again
  ARM: prima2: fix __init section for cpu hotplug
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3)
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3)
  arm: socfpga: Add SMP support for actual socfpga harware
  arm: Add v7_invalidate_l1 to cache-v7.S
  arm: socfpga: Add entries to enable make dtbs socfpga
  arm: socfpga: Add new device tree source for actual socfpga HW
  ARM: tegra: sort Kconfig selects for Tegra114
  ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114
  ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC
  ARM: tegra: Fix build error for gic update
  ARM: tegra: remove empty tegra_smp_init_cpus()
  ARM: shmobile: Register ARM architected timer
  ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move
  ARM: shmobile: r8a7779: Correct TMU clock support
  ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT
  ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles
  ARM: mxs: use apbx bus clock to drive the timers on timrotv2
  ...
This commit is contained in:
Linus Torvalds 2013-02-21 15:27:22 -08:00
parent 3298a3511f 9cb0d1babf
commit bab588fcfb
255 changed files with 11530 additions and 9701 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/devicetree/bindings/arm/altera/socfpga-system.txt
View File

@ -3,9 +3,11 @@ Altera SOCFPGA System Manager
Required properties:
- compatible : "altr,sys-mgr"
- reg : Should contain 1 register ranges(address and length)
- cpu1-start-addr : CPU1 start address in hex.
Example:
sysmgr@ffd08000 {
compatible = "altr,sys-mgr";
reg = <0xffd08000 0x1000>;
cpu1-start-addr = <0xffd080c4>;
};

10
Documentation/devicetree/bindings/arm/sirf.txt
View File

@ -1,3 +1,9 @@
prima2 "cb" evaluation board
CSR SiRFprimaII and SiRFmarco device tree bindings.
========================================
Required root node properties:
- compatible = "sirf,prima2-cb", "sirf,prima2";
- compatible:
- "sirf,prima2-cb" : prima2 "cb" evaluation board
- "sirf,marco-cb" : marco "cb" evaluation board
- "sirf,prima2" : prima2 device based board
- "sirf,marco" : marco device based board

8
Documentation/devicetree/bindings/arm/vt8500.txt
View File

@ -12,3 +12,11 @@ compatible = "wm,wm8505";
Boards with the Wondermedia WM8650 SoC shall have the following properties:
Required root node property:
compatible = "wm,wm8650";
Boards with the Wondermedia WM8750 SoC shall have the following properties:
Required root node property:
compatible = "wm,wm8750";
Boards with the Wondermedia WM8850 SoC shall have the following properties:
Required root node property:
compatible = "wm,wm8850";

91
Documentation/devicetree/bindings/clock/imx31-clock.txt Normal file
View File

@ -0,0 +1,91 @@
* Clock bindings for Freescale i.MX31
Required properties:
- compatible: Should be "fsl,imx31-ccm"
- reg: Address and length of the register set
- interrupts: Should contain CCM interrupt
- #clock-cells: Should be <1>
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. The following is a full list of i.MX31
clocks and IDs.
Clock ID
-----------------------
dummy 0
ckih 1
ckil 2
mpll 3
spll 4
upll 5
mcu_main 6
hsp 7
ahb 8
nfc 9
ipg 10
per_div 11
per 12
csi_sel 13
fir_sel 14
csi_div 15
usb_div_pre 16
usb_div_post 17
fir_div_pre 18
fir_div_post 19
sdhc1_gate 20
sdhc2_gate 21
gpt_gate 22
epit1_gate 23
epit2_gate 24
iim_gate 25
ata_gate 26
sdma_gate 27
cspi3_gate 28
rng_gate 29
uart1_gate 30
uart2_gate 31
ssi1_gate 32
i2c1_gate 33
i2c2_gate 34
i2c3_gate 35
hantro_gate 36
mstick1_gate 37
mstick2_gate 38
csi_gate 39
rtc_gate 40
wdog_gate 41
pwm_gate 42
sim_gate 43
ect_gate 44
usb_gate 45
kpp_gate 46
ipu_gate 47
uart3_gate 48
uart4_gate 49
uart5_gate 50
owire_gate 51
ssi2_gate 52
cspi1_gate 53
cspi2_gate 54
gacc_gate 55
emi_gate 56
rtic_gate 57
firi_gate 58
Examples:
clks: ccm@53f80000{
compatible = "fsl,imx31-ccm";
reg = <0x53f80000 0x4000>;
interrupts = <0 31 0x04 0 53 0x04>;
#clock-cells = <1>;
};
uart1: serial@43f90000 {
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
reg = <0x43f90000 0x4000>;
interrupts = <45>;
clocks = <&clks 10>, <&clks 30>;
clock-names = "ipg", "per";
status = "disabled";
};

205
Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt Normal file
View File

@ -0,0 +1,205 @@
NVIDIA Tegra20 Clock And Reset Controller
This binding uses the common clock binding:
Documentation/devicetree/bindings/clock/clock-bindings.txt
The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
for muxing and gating Tegra's clocks, and setting their rates.
Required properties :
- compatible : Should be "nvidia,tegra20-car"
- reg : Should contain CAR registers location and length
- clocks : Should contain phandle and clock specifiers for two clocks:
the 32 KHz "32k_in", and the board-specific oscillator "osc".
- #clock-cells : Should be 1.
In clock consumers, this cell represents the clock ID exposed by the CAR.
The first 96 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
registers. These IDs often match those in the CAR's RST_DEVICES registers,
but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
this case, those clocks are assigned IDs above 95 in order to highlight
this issue. Implementations that interpret these clock IDs as bit values
within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
explicitly handle these special cases.
The balance of the clocks controlled by the CAR are assigned IDs of 96 and
above.
0 cpu
1 unassigned
2 unassigned
3 ac97
4 rtc
5 tmr
6 uart1
7 unassigned (register bit affects uart2 and vfir)
8 gpio
9 sdmmc2
10 unassigned (register bit affects spdif_in and spdif_out)
11 i2s1
12 i2c1
13 ndflash
14 sdmmc1
15 sdmmc4
16 twc
17 pwm
18 i2s2
19 epp
20 unassigned (register bit affects vi and vi_sensor)
21 2d
22 usbd
23 isp
24 3d
25 ide
26 disp2
27 disp1
28 host1x
29 vcp
30 unassigned
31 cache2
32 mem
33 ahbdma
34 apbdma
35 unassigned
36 kbc
37 stat_mon
38 pmc
39 fuse
40 kfuse
41 sbc1
42 snor
43 spi1
44 sbc2
45 xio
46 sbc3
47 dvc
48 dsi
49 unassigned (register bit affects tvo and cve)
50 mipi
51 hdmi
52 csi
53 tvdac
54 i2c2
55 uart3
56 unassigned
57 emc
58 usb2
59 usb3
60 mpe
61 vde
62 bsea
63 bsev
64 speedo
65 uart4
66 uart5
67 i2c3
68 sbc4
69 sdmmc3
70 pcie
71 owr
72 afi
73 csite
74 unassigned
75 avpucq
76 la
77 unassigned
78 unassigned
79 unassigned
80 unassigned
81 unassigned
82 unassigned
83 unassigned
84 irama
85 iramb
86 iramc
87 iramd
88 cram2
89 audio_2x a/k/a audio_2x_sync_clk
90 clk_d
91 unassigned
92 sus
93 cdev1
94 cdev2
95 unassigned
96 uart2
97 vfir
98 spdif_in
99 spdif_out
100 vi
101 vi_sensor
102 tvo
103 cve
104 osc
105 clk_32k a/k/a clk_s
106 clk_m
107 sclk
108 cclk
109 hclk
110 pclk
111 blink
112 pll_a
113 pll_a_out0
114 pll_c
115 pll_c_out1
116 pll_d
117 pll_d_out0
118 pll_e
119 pll_m
120 pll_m_out1
121 pll_p
122 pll_p_out1
123 pll_p_out2
124 pll_p_out3
125 pll_p_out4
126 pll_s
127 pll_u
128 pll_x
129 cop a/k/a avp
130 audio a/k/a audio_sync_clk
131 pll_ref
132 twd
Example SoC include file:
/ {
tegra_car: clock {
compatible = "nvidia,tegra20-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
};
usb@c5004000 {
clocks = <&tegra_car 58>; /* usb2 */
};
};
Example board file:
/ {
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
osc: clock@0 {
compatible = "fixed-clock";
reg = <0>;
#clock-cells = <0>;
clock-frequency = <12000000>;
};
clk_32k: clock@1 {
compatible = "fixed-clock";
reg = <1>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
&tegra_car {
clocks = <&clk_32k> <&osc>;
};
};

262
Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt Normal file
View File

@ -0,0 +1,262 @@
NVIDIA Tegra30 Clock And Reset Controller
This binding uses the common clock binding:
Documentation/devicetree/bindings/clock/clock-bindings.txt
The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
for muxing and gating Tegra's clocks, and setting their rates.
Required properties :
- compatible : Should be "nvidia,tegra30-car"
- reg : Should contain CAR registers location and length
- clocks : Should contain phandle and clock specifiers for two clocks:
the 32 KHz "32k_in", and the board-specific oscillator "osc".
- #clock-cells : Should be 1.
In clock consumers, this cell represents the clock ID exposed by the CAR.
The first 130 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
registers. These IDs often match those in the CAR's RST_DEVICES registers,
but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
this case, those clocks are assigned IDs above 160 in order to highlight
this issue. Implementations that interpret these clock IDs as bit values
within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
explicitly handle these special cases.
The balance of the clocks controlled by the CAR are assigned IDs of 160 and
above.
0 cpu
1 unassigned
2 unassigned
3 unassigned
4 rtc
5 timer
6 uarta
7 unassigned (register bit affects uartb and vfir)
8 gpio
9 sdmmc2
10 unassigned (register bit affects spdif_in and spdif_out)
11 i2s1
12 i2c1
13 ndflash
14 sdmmc1
15 sdmmc4
16 unassigned
17 pwm
18 i2s2
19 epp
20 unassigned (register bit affects vi and vi_sensor)
21 2d
22 usbd
23 isp
24 3d
25 unassigned
26 disp2
27 disp1
28 host1x
29 vcp
30 i2s0
31 cop_cache
32 mc
33 ahbdma
34 apbdma
35 unassigned
36 kbc
37 statmon
38 pmc
39 unassigned (register bit affects fuse and fuse_burn)
40 kfuse
41 sbc1
42 nor
43 unassigned
44 sbc2
45 unassigned
46 sbc3
47 i2c5
48 dsia
49 unassigned (register bit affects cve and tvo)
50 mipi
51 hdmi
52 csi
53 tvdac
54 i2c2
55 uartc
56 unassigned
57 emc
58 usb2
59 usb3
60 mpe
61 vde
62 bsea
63 bsev
64 speedo
65 uartd
66 uarte
67 i2c3
68 sbc4
69 sdmmc3
70 pcie
71 owr
72 afi
73 csite
74 pciex
75 avpucq
76 la
77 unassigned
78 unassigned
79 dtv
80 ndspeed
81 i2cslow
82 dsib
83 unassigned
84 irama
85 iramb
86 iramc
87 iramd
88 cram2
89 unassigned
90 audio_2x a/k/a audio_2x_sync_clk
91 unassigned
92 csus
93 cdev2
94 cdev1
95 unassigned
96 cpu_g
97 cpu_lp
98 3d2
99 mselect
100 tsensor
101 i2s3
102 i2s4
103 i2c4
104 sbc5
105 sbc6
106 d_audio
107 apbif
108 dam0
109 dam1
110 dam2
111 hda2codec_2x
112 atomics
113 audio0_2x
114 audio1_2x
115 audio2_2x
116 audio3_2x
117 audio4_2x
118 audio5_2x
119 actmon
120 extern1
121 extern2
122 extern3
123 sata_oob
124 sata
125 hda
127 se
128 hda2hdmi
129 sata_cold
160 uartb
161 vfir
162 spdif_in
163 spdif_out
164 vi
165 vi_sensor
166 fuse
167 fuse_burn
168 cve
169 tvo
170 clk_32k
171 clk_m
172 clk_m_div2
173 clk_m_div4
174 pll_ref
175 pll_c
176 pll_c_out1
177 pll_m
178 pll_m_out1
179 pll_p
180 pll_p_out1
181 pll_p_out2
182 pll_p_out3
183 pll_p_out4
184 pll_a
185 pll_a_out0
186 pll_d
187 pll_d_out0
188 pll_d2
189 pll_d2_out0
190 pll_u
191 pll_x
192 pll_x_out0
193 pll_e
194 spdif_in_sync
195 i2s0_sync
196 i2s1_sync
197 i2s2_sync
198 i2s3_sync
199 i2s4_sync
200 vimclk
201 audio0
202 audio1
203 audio2
204 audio3
205 audio4
206 audio5
207 clk_out_1 (extern1)
208 clk_out_2 (extern2)
209 clk_out_3 (extern3)
210 sclk
211 blink
212 cclk_g
213 cclk_lp
214 twd
215 cml0
216 cml1
217 hclk
218 pclk
Example SoC include file:
/ {
tegra_car: clock {
compatible = "nvidia,tegra30-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
};
usb@c5004000 {
clocks = <&tegra_car 58>; /* usb2 */
};
};
Example board file:
/ {
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
osc: clock@0 {
compatible = "fixed-clock";
reg = <0>;
#clock-cells = <0>;
clock-frequency = <12000000>;
};
clk_32k: clock@1 {
compatible = "fixed-clock";
reg = <1>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
&tegra_car {
clocks = <&clk_32k> <&osc>;
};
};

3
Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
View File

@ -11,6 +11,7 @@ Required properties :
- phy_type : Should be one of "ulpi" or "utmi".
- nvidia,vbus-gpio : If present, specifies a gpio that needs to be
activated for the bus to be powered.
- nvidia,phy : phandle of the PHY instance, the controller is connected to.
Required properties for phy_type == ulpi:
- nvidia,phy-reset-gpio : The GPIO used to reset the PHY.
@ -27,3 +28,5 @@ Optional properties:
registers are accessed through the APB_MISC base address instead of
the USB controller. Since this is a legacy issue it probably does not
warrant a compatible string of its own.
- nvidia,needs-double-reset : boolean is to be set for some of the Tegra2
USB ports, which need reset twice due to hardware issues.

17
Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt Normal file
View File

@ -0,0 +1,17 @@
Tegra SOC USB PHY
The device node for Tegra SOC USB PHY:
Required properties :
- compatible : Should be "nvidia,tegra20-usb-phy".
- reg : Address and length of the register set for the USB PHY interface.
- phy_type : Should be one of "ulpi" or "utmi".
Required properties for phy_type == ulpi:
- nvidia,phy-reset-gpio : The GPIO used to reset the PHY.
Optional properties:
- nvidia,has-legacy-mode : boolean indicates whether this controller can
operate in legacy mode (as APX 2500 / 2600). In legacy mode some
registers are accessed through the APB_MISC base address instead of
the USB controller.

2
arch/arm/Kconfig
View File

@ -393,6 +393,7 @@ config ARCH_GEMINI
config ARCH_SIRF
bool "CSR SiRF"
select ARCH_REQUIRE_GPIOLIB
select AUTO_ZRELADDR
select COMMON_CLK
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
@ -640,6 +641,7 @@ config ARCH_LPC32XX
config ARCH_TEGRA
bool "NVIDIA Tegra"
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select CLKSRC_OF

45
arch/arm/Kconfig.debug
View File

@ -205,12 +205,19 @@ choice
Say Y here if you want kernel low-level debugging support
on i.MX28.
config DEBUG_IMX31_IMX35_UART
bool "i.MX31 and i.MX35 Debug UART"
depends on SOC_IMX31 || SOC_IMX35
config DEBUG_IMX31_UART
bool "i.MX31 Debug UART"
depends on SOC_IMX31
help
Say Y here if you want kernel low-level debugging support
on i.MX31 or i.MX35.
on i.MX31.
config DEBUG_IMX35_UART
bool "i.MX35 Debug UART"
depends on SOC_IMX35
help
Say Y here if you want kernel low-level debugging support
on i.MX35.
config DEBUG_IMX51_UART
bool "i.MX51 Debug UART"
@ -393,6 +400,20 @@ choice
Say Y here if you want kernel low-level debugging support
on Tegra based platforms.
config DEBUG_SIRFPRIMA2_UART1
bool "Kernel low-level debugging messages via SiRFprimaII UART1"
depends on ARCH_PRIMA2
help
Say Y here if you want the debug print routines to direct
their output to the uart1 port on SiRFprimaII devices.
config DEBUG_SIRFMARCO_UART1
bool "Kernel low-level debugging messages via SiRFmarco UART1"
depends on ARCH_MARCO
help
Say Y here if you want the debug print routines to direct
their output to the uart1 port on SiRFmarco devices.
config DEBUG_VEXPRESS_UART0_DETECT
bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
depends on ARCH_VEXPRESS && CPU_CP15_MMU
@ -464,11 +485,16 @@ choice
endchoice
config DEBUG_IMX6Q_UART_PORT
int "i.MX6Q Debug UART Port (1-5)" if DEBUG_IMX6Q_UART
range 1 5
config DEBUG_IMX_UART_PORT
int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
DEBUG_IMX21_IMX27_UART || \
DEBUG_IMX31_UART || \
DEBUG_IMX35_UART || \
DEBUG_IMX51_UART || \
DEBUG_IMX50_IMX53_UART || \
DEBUG_IMX6Q_UART
default 1
depends on SOC_IMX6Q
help
Choose UART port on which kernel low-level debug messages
should be output.
@ -557,7 +583,8 @@ config DEBUG_LL_INCLUDE
default "debug/imx.S" if DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
DEBUG_IMX21_IMX27_UART || \
DEBUG_IMX31_IMX35_UART || \
DEBUG_IMX31_UART || \
DEBUG_IMX35_UART || \
DEBUG_IMX51_UART || \
DEBUG_IMX53_UART ||\
DEBUG_IMX6Q_UART

10
arch/arm/boot/dts/Makefile
View File

@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
kirkwood-ts219-6281.dtb \
kirkwood-ts219-6282.dtb \
kirkwood-openblocks_a6.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
msm8960-cdp.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
@ -124,6 +125,8 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
r8a7740-armadillo800eva.dtb \
sh73a0-kzm9g.dtb \
sh7372-mackerel.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
socfpga_vt.dtb
dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
spear1340-evb.dtb
dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
@ -143,7 +146,9 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra20-ventana.dtb \
tegra20-whistler.dtb \
tegra30-cardhu-a02.dtb \
tegra30-cardhu-a04.dtb
tegra30-cardhu-a04.dtb \
tegra114-dalmore.dtb \
tegra114-pluto.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
vexpress-v2p-ca9.dtb \
vexpress-v2p-ca15-tc1.dtb \
@ -151,7 +156,8 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
xenvm-4.2.dtb
dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
wm8505-ref.dtb \
wm8650-mid.dtb
wm8650-mid.dtb \
wm8850-w70v2.dtb
dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
targets += dtbs

7
arch/arm/boot/dts/emev2.dtsi
View File

@ -15,11 +15,18 @@
interrupt-parent = <&gic>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
};
};

17
arch/arm/boot/dts/imx31.dtsi
View File

@ -45,6 +45,8 @@
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
reg = <0x43f90000 0x4000>;
interrupts = <45>;
clocks = <&clks 10>, <&clks 30>;
clock-names = "ipg", "per";
status = "disabled";
};
@ -52,12 +54,16 @@
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
reg = <0x43f94000 0x4000>;
interrupts = <32>;
clocks = <&clks 10>, <&clks 31>;
clock-names = "ipg", "per";
status = "disabled";
};
uart4: serial@43fb0000 {
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
reg = <0x43fb0000 0x4000>;
clocks = <&clks 10>, <&clks 49>;
clock-names = "ipg", "per";
interrupts = <46>;
status = "disabled";
};
@ -66,6 +72,8 @@
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
reg = <0x43fb4000 0x4000>;
interrupts = <47>;
clocks = <&clks 10>, <&clks 50>;
clock-names = "ipg", "per";
status = "disabled";
};
};
@ -81,8 +89,17 @@
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
reg = <0x5000c000 0x4000>;
interrupts = <18>;
clocks = <&clks 10>, <&clks 48>;
clock-names = "ipg", "per";
status = "disabled";
};
clks: ccm@53f80000{
compatible = "fsl,imx31-ccm";
reg = <0x53f80000 0x4000>;
interrupts = <0 31 0x04 0 53 0x04>;
#clock-cells = <1>;
};
};
};
};

54
arch/arm/boot/dts/marco-evb.dts Normal file
View File

@ -0,0 +1,54 @@
/*
* DTS file for CSR SiRFmarco Evaluation Board
*
* Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
/dts-v1/;
/include/ "marco.dtsi"
/ {
model = "CSR SiRFmarco Evaluation Board";
compatible = "sirf,marco-cb", "sirf,marco";
memory {
reg = <0x40000000 0x60000000>;
};
axi {
peri-iobg {
uart1: uart@cc060000 {
status = "okay";
};
uart2: uart@cc070000 {
status = "okay";
};
i2c0: i2c@cc0e0000 {
status = "okay";
fpga-cpld@4d {
compatible = "sirf,fpga-cpld";
reg = <0x4d>;
};
};
spi1: spi@cc170000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins_a>;
spi@0 {
compatible = "spidev";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
pci-iobg {
sd0: sdhci@cd000000 {
bus-width = <8>;
status = "okay";
};
};
};
};
};

756
arch/arm/boot/dts/marco.dtsi Normal file
View File

@ -0,0 +1,756 @@
/*
* DTS file for CSR SiRFmarco SoC
*
* Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
/include/ "skeleton.dtsi"
/ {
compatible = "sirf,marco";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&gic>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
};
};
axi {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x40000000 0x40000000 0xa0000000>;
l2-cache-controller@c0030000 {
compatible = "sirf,marco-pl310-cache", "arm,pl310-cache";
reg = <0xc0030000 0x1000>;
interrupts = <0 59 0>;
arm,tag-latency = <1 1 1>;
arm,data-latency = <1 1 1>;
arm,filter-ranges = <0x40000000 0x80000000>;
};
gic: interrupt-controller@c0011000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0xc0011000 0x1000>,
<0xc0010100 0x0100>;
};
rstc-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xc2000000 0xc2000000 0x1000000>;
reset-controller@c2000000 {
compatible = "sirf,marco-rstc";
reg = <0xc2000000 0x10000>;
};
};
sys-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xc3000000 0xc3000000 0x1000000>;
clock-controller@c3000000 {
compatible = "sirf,marco-clkc";
reg = <0xc3000000 0x1000>;
interrupts = <0 3 0>;
};
rsc-controller@c3010000 {
compatible = "sirf,marco-rsc";
reg = <0xc3010000 0x1000>;
};
};
mem-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xc4000000 0xc4000000 0x1000000>;
memory-controller@c4000000 {
compatible = "sirf,marco-memc";
reg = <0xc4000000 0x10000>;
interrupts = <0 27 0>;
};
};
disp-iobg0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xc5000000 0xc5000000 0x1000000>;
display0@c5000000 {
compatible = "sirf,marco-lcd";
reg = <0xc5000000 0x10000>;
interrupts = <0 30 0>;
};
vpp0@c5010000 {
compatible = "sirf,marco-vpp";
reg = <0xc5010000 0x10000>;
interrupts = <0 31 0>;
};
};
disp-iobg1 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xc6000000 0xc6000000 0x1000000>;
display1@c6000000 {
compatible = "sirf,marco-lcd";
reg = <0xc6000000 0x10000>;
interrupts = <0 62 0>;
};
vpp1@c6010000 {
compatible = "sirf,marco-vpp";
reg = <0xc6010000 0x10000>;
interrupts = <0 63 0>;
};
};
graphics-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xc8000000 0xc8000000 0x1000000>;
graphics@c8000000 {
compatible = "powervr,sgx540";
reg = <0xc8000000 0x1000000>;
interrupts = <0 6 0>;
};
};
multimedia-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xc9000000 0xc9000000 0x1000000>;
multimedia@a0000000 {
compatible = "sirf,marco-video-codec";
reg = <0xc9000000 0x1000000>;
interrupts = <0 5 0>;
};
};
dsp-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xca000000 0xca000000 0x2000000>;
dspif@ca000000 {
compatible = "sirf,marco-dspif";
reg = <0xca000000 0x10000>;
interrupts = <0 9 0>;
};
gps@ca010000 {
compatible = "sirf,marco-gps";
reg = <0xca010000 0x10000>;
interrupts = <0 7 0>;
};
dsp@cb000000 {
compatible = "sirf,marco-dsp";
reg = <0xcb000000 0x1000000>;
interrupts = <0 8 0>;
};
};
peri-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xcc000000 0xcc000000 0x2000000>;
timer@cc020000 {
compatible = "sirf,marco-tick";
reg = <0xcc020000 0x1000>;
interrupts = <0 0 0>,
<0 1 0>,
<0 2 0>,
<0 49 0>,
<0 50 0>,
<0 51 0>;
};
nand@cc030000 {
compatible = "sirf,marco-nand";
reg = <0xcc030000 0x10000>;
interrupts = <0 41 0>;
};
audio@cc040000 {
compatible = "sirf,marco-audio";
reg = <0xcc040000 0x10000>;
interrupts = <0 35 0>;
};
uart0: uart@cc050000 {
cell-index = <0>;
compatible = "sirf,marco-uart";
reg = <0xcc050000 0x1000>;
interrupts = <0 17 0>;
fifosize = <128>;
status = "disabled";
};
uart1: uart@cc060000 {
cell-index = <1>;
compatible = "sirf,marco-uart";
reg = <0xcc060000 0x1000>;
interrupts = <0 18 0>;
fifosize = <32>;
status = "disabled";
};
uart2: uart@cc070000 {
cell-index = <2>;
compatible = "sirf,marco-uart";
reg = <0xcc070000 0x1000>;
interrupts = <0 19 0>;
fifosize = <128>;
status = "disabled";
};
uart3: uart@cc190000 {
cell-index = <3>;
compatible = "sirf,marco-uart";
reg = <0xcc190000 0x1000>;
interrupts = <0 66 0>;
fifosize = <128>;
status = "disabled";
};
uart4: uart@cc1a0000 {
cell-index = <4>;
compatible = "sirf,marco-uart";
reg = <0xcc1a0000 0x1000>;
interrupts = <0 69 0>;
fifosize = <128>;
status = "disabled";
};
usp0: usp@cc080000 {
cell-index = <0>;
compatible = "sirf,marco-usp";
reg = <0xcc080000 0x10000>;
interrupts = <0 20 0>;
status = "disabled";
};
usp1: usp@cc090000 {
cell-index = <1>;
compatible = "sirf,marco-usp";
reg = <0xcc090000 0x10000>;
interrupts = <0 21 0>;
status = "disabled";
};
usp2: usp@cc0a0000 {
cell-index = <2>;
compatible = "sirf,marco-usp";
reg = <0xcc0a0000 0x10000>;
interrupts = <0 22 0>;
status = "disabled";
};
dmac0: dma-controller@cc0b0000 {
cell-index = <0>;
compatible = "sirf,marco-dmac";
reg = <0xcc0b0000 0x10000>;
interrupts = <0 12 0>;
};
dmac1: dma-controller@cc160000 {
cell-index = <1>;
compatible = "sirf,marco-dmac";
reg = <0xcc160000 0x10000>;
interrupts = <0 13 0>;
};
vip@cc0c0000 {
compatible = "sirf,marco-vip";
reg = <0xcc0c0000 0x10000>;
};
spi0: spi@cc0d0000 {
cell-index = <0>;
compatible = "sirf,marco-spi";
reg = <0xcc0d0000 0x10000>;
interrupts = <0 15 0>;
sirf,spi-num-chipselects = <1>;
cs-gpios = <&gpio 0 0>;
sirf,spi-dma-rx-channel = <25>;
sirf,spi-dma-tx-channel = <20>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi1: spi@cc170000 {
cell-index = <1>;
compatible = "sirf,marco-spi";
reg = <0xcc170000 0x10000>;
interrupts = <0 16 0>;
sirf,spi-num-chipselects = <1>;
cs-gpios = <&gpio 0 0>;
sirf,spi-dma-rx-channel = <12>;
sirf,spi-dma-tx-channel = <13>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c0: i2c@cc0e0000 {
cell-index = <0>;
compatible = "sirf,marco-i2c";
reg = <0xcc0e0000 0x10000>;
interrupts = <0 24 0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c1: i2c@cc0f0000 {
cell-index = <1>;
compatible = "sirf,marco-i2c";
reg = <0xcc0f0000 0x10000>;
interrupts = <0 25 0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
tsc@cc110000 {
compatible = "sirf,marco-tsc";
reg = <0xcc110000 0x10000>;
interrupts = <0 33 0>;
};
gpio: pinctrl@cc120000 {
#gpio-cells = <2>;
#interrupt-cells = <2>;
compatible = "sirf,marco-pinctrl";
reg = <0xcc120000 0x10000>;
interrupts = <0 43 0>,
<0 44 0>,
<0 45 0>,
<0 46 0>,
<0 47 0>;
gpio-controller;
interrupt-controller;
lcd_16pins_a: lcd0_0 {
lcd {
sirf,pins = "lcd_16bitsgrp";
sirf,function = "lcd_16bits";
};
};
lcd_18pins_a: lcd0_1 {
lcd {
sirf,pins = "lcd_18bitsgrp";
sirf,function = "lcd_18bits";
};
};
lcd_24pins_a: lcd0_2 {
lcd {
sirf,pins = "lcd_24bitsgrp";
sirf,function = "lcd_24bits";
};
};
lcdrom_pins_a: lcdrom0_0 {
lcd {
sirf,pins = "lcdromgrp";
sirf,function = "lcdrom";
};
};
uart0_pins_a: uart0_0 {
uart {
sirf,pins = "uart0grp";
sirf,function = "uart0";
};
};
uart1_pins_a: uart1_0 {
uart {
sirf,pins = "uart1grp";
sirf,function = "uart1";
};
};
uart2_pins_a: uart2_0 {
uart {
sirf,pins = "uart2grp";
sirf,function = "uart2";
};
};
uart2_noflow_pins_a: uart2_1 {
uart {
sirf,pins = "uart2_nostreamctrlgrp";
sirf,function = "uart2_nostreamctrl";
};
};
spi0_pins_a: spi0_0 {
spi {
sirf,pins = "spi0grp";
sirf,function = "spi0";
};
};
spi1_pins_a: spi1_0 {
spi {
sirf,pins = "spi1grp";
sirf,function = "spi1";
};
};
i2c0_pins_a: i2c0_0 {
i2c {
sirf,pins = "i2c0grp";
sirf,function = "i2c0";
};
};
i2c1_pins_a: i2c1_0 {
i2c {
sirf,pins = "i2c1grp";
sirf,function = "i2c1";
};
};
pwm0_pins_a: pwm0_0 {
pwm {
sirf,pins = "pwm0grp";
sirf,function = "pwm0";
};
};
pwm1_pins_a: pwm1_0 {
pwm {
sirf,pins = "pwm1grp";
sirf,function = "pwm1";
};
};
pwm2_pins_a: pwm2_0 {
pwm {
sirf,pins = "pwm2grp";
sirf,function = "pwm2";
};
};
pwm3_pins_a: pwm3_0 {
pwm {
sirf,pins = "pwm3grp";
sirf,function = "pwm3";
};
};
gps_pins_a: gps_0 {
gps {
sirf,pins = "gpsgrp";
sirf,function = "gps";
};
};
vip_pins_a: vip_0 {
vip {
sirf,pins = "vipgrp";
sirf,function = "vip";
};
};
sdmmc0_pins_a: sdmmc0_0 {
sdmmc0 {
sirf,pins = "sdmmc0grp";
sirf,function = "sdmmc0";
};
};
sdmmc1_pins_a: sdmmc1_0 {
sdmmc1 {
sirf,pins = "sdmmc1grp";
sirf,function = "sdmmc1";
};
};
sdmmc2_pins_a: sdmmc2_0 {
sdmmc2 {
sirf,pins = "sdmmc2grp";
sirf,function = "sdmmc2";
};
};
sdmmc3_pins_a: sdmmc3_0 {
sdmmc3 {
sirf,pins = "sdmmc3grp";
sirf,function = "sdmmc3";
};
};
sdmmc4_pins_a: sdmmc4_0 {
sdmmc4 {
sirf,pins = "sdmmc4grp";
sirf,function = "sdmmc4";
};
};
sdmmc5_pins_a: sdmmc5_0 {
sdmmc5 {
sirf,pins = "sdmmc5grp";
sirf,function = "sdmmc5";
};
};
i2s_pins_a: i2s_0 {
i2s {
sirf,pins = "i2sgrp";
sirf,function = "i2s";
};
};
ac97_pins_a: ac97_0 {
ac97 {
sirf,pins = "ac97grp";
sirf,function = "ac97";
};
};
nand_pins_a: nand_0 {
nand {
sirf,pins = "nandgrp";
sirf,function = "nand";
};
};
usp0_pins_a: usp0_0 {
usp0 {
sirf,pins = "usp0grp";
sirf,function = "usp0";
};
};
usp1_pins_a: usp1_0 {
usp1 {
sirf,pins = "usp1grp";
sirf,function = "usp1";
};
};
usp2_pins_a: usp2_0 {
usp2 {
sirf,pins = "usp2grp";
sirf,function = "usp2";
};
};
usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus_0 {
usb0_utmi_drvbus {
sirf,pins = "usb0_utmi_drvbusgrp";
sirf,function = "usb0_utmi_drvbus";
};
};
usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus_0 {
usb1_utmi_drvbus {
sirf,pins = "usb1_utmi_drvbusgrp";
sirf,function = "usb1_utmi_drvbus";
};
};
warm_rst_pins_a: warm_rst_0 {
warm_rst {
sirf,pins = "warm_rstgrp";
sirf,function = "warm_rst";
};
};
pulse_count_pins_a: pulse_count_0 {
pulse_count {
sirf,pins = "pulse_countgrp";
sirf,function = "pulse_count";
};
};
cko0_rst_pins_a: cko0_rst_0 {
cko0_rst {
sirf,pins = "cko0_rstgrp";
sirf,function = "cko0_rst";
};
};
cko1_rst_pins_a: cko1_rst_0 {
cko1_rst {
sirf,pins = "cko1_rstgrp";
sirf,function = "cko1_rst";
};
};
};
pwm@cc130000 {
compatible = "sirf,marco-pwm";
reg = <0xcc130000 0x10000>;
};
efusesys@cc140000 {
compatible = "sirf,marco-efuse";
reg = <0xcc140000 0x10000>;
};
pulsec@cc150000 {
compatible = "sirf,marco-pulsec";
reg = <0xcc150000 0x10000>;
interrupts = <0 48 0>;
};
pci-iobg {
compatible = "sirf,marco-pciiobg", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xcd000000 0xcd000000 0x1000000>;
sd0: sdhci@cd000000 {
cell-index = <0>;
compatible = "sirf,marco-sdhc";
reg = <0xcd000000 0x100000>;
interrupts = <0 38 0>;
status = "disabled";
};
sd1: sdhci@cd100000 {
cell-index = <1>;
compatible = "sirf,marco-sdhc";
reg = <0xcd100000 0x100000>;
interrupts = <0 38 0>;
status = "disabled";
};
sd2: sdhci@cd200000 {
cell-index = <2>;
compatible = "sirf,marco-sdhc";
reg = <0xcd200000 0x100000>;
interrupts = <0 23 0>;
status = "disabled";
};
sd3: sdhci@cd300000 {
cell-index = <3>;
compatible = "sirf,marco-sdhc";
reg = <0xcd300000 0x100000>;
interrupts = <0 23 0>;
status = "disabled";
};
sd4: sdhci@cd400000 {
cell-index = <4>;
compatible = "sirf,marco-sdhc";
reg = <0xcd400000 0x100000>;
interrupts = <0 39 0>;
status = "disabled";
};
sd5: sdhci@cd500000 {
cell-index = <5>;
compatible = "sirf,marco-sdhc";
reg = <0xcd500000 0x100000>;
interrupts = <0 39 0>;
status = "disabled";
};
pci-copy@cd900000 {
compatible = "sirf,marco-pcicp";
reg = <0xcd900000 0x100000>;
interrupts = <0 40 0>;
};
rom-interface@cda00000 {
compatible = "sirf,marco-romif";
reg = <0xcda00000 0x100000>;
};
};
};
rtc-iobg {
compatible = "sirf,marco-rtciobg", "sirf-marco-rtciobg-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0xc1000000 0x10000>;
gpsrtc@1000 {
compatible = "sirf,marco-gpsrtc";
reg = <0x1000 0x1000>;
interrupts = <0 55 0>,
<0 56 0>,
<0 57 0>;
};
sysrtc@2000 {
compatible = "sirf,marco-sysrtc";
reg = <0x2000 0x1000>;
interrupts = <0 52 0>,
<0 53 0>,
<0 54 0>;
};
pwrc@3000 {
compatible = "sirf,marco-pwrc";
reg = <0x3000 0x1000>;
interrupts = <0 32 0>;
};
};
uus-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xce000000 0xce000000 0x1000000>;
usb0: usb@ce000000 {
compatible = "chipidea,ci13611a-marco";
reg = <0xce000000 0x10000>;
interrupts = <0 10 0>;
};
usb1: usb@ce010000 {
compatible = "chipidea,ci13611a-marco";
reg = <0xce010000 0x10000>;
interrupts = <0 11 0>;
};
security@ce020000 {
compatible = "sirf,marco-security";
reg = <0xce020000 0x10000>;
interrupts = <0 42 0>;
};
};
can-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xd0000000 0xd0000000 0x1000000>;
can0: can@d0000000 {
compatible = "sirf,marco-can";
reg = <0xd0000000 0x10000>;
};
can1: can@d0010000 {
compatible = "sirf,marco-can";
reg = <0xd0010000 0x10000>;
};
};
lvds-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xd1000000 0xd1000000 0x1000000>;
lvds@d1000000 {
compatible = "sirf,marco-lvds";
reg = <0xd1000000 0x10000>;
interrupts = <0 64 0>;
};
};
};
};

24
arch/arm/boot/dts/sh73a0-reference.dtsi Normal file
View File

@ -0,0 +1,24 @@
/*
* Device Tree Source for the SH73A0 SoC
*
* Copyright (C) 2012 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/include/ "sh73a0.dtsi"
/ {
compatible = "renesas,sh73a0";
mmcif: mmcif@0x10010000 {
compatible = "renesas,sh-mmcif";
reg = <0xe6bd0000 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 140 0x4
0 141 0x4>;
reg-io-width = <4>;
};
};

100
arch/arm/boot/dts/sh73a0.dtsi Normal file
View File

@ -0,0 +1,100 @@
/*
* Device Tree Source for the SH73A0 SoC
*
* Copyright (C) 2012 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/include/ "skeleton.dtsi"
/ {
compatible = "renesas,sh73a0";
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
};
};
gic: interrupt-controller@f0001000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <1>;
interrupt-controller;
reg = <0xf0001000 0x1000>,
<0xf0000100 0x100>;
};
i2c0: i2c@0xe6820000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6820000 0x425>;
interrupt-parent = <&gic>;
interrupts = <0 167 0x4
0 168 0x4
0 169 0x4
0 170 0x4>;
};
i2c1: i2c@0xe6822000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6822000 0x425>;
interrupt-parent = <&gic>;
interrupts = <0 51 0x4
0 52 0x4
0 53 0x4
0 54 0x4>;
};
i2c2: i2c@0xe6824000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6824000 0x425>;
interrupt-parent = <&gic>;
interrupts = <0 171 0x4
0 172 0x4
0 173 0x4
0 174 0x4>;
};
i2c3: i2c@0xe6826000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6826000 0x425>;
interrupt-parent = <&gic>;
interrupts = <0 183 0x4
0 184 0x4
0 185 0x4
0 186 0x4>;
};
i2c4: i2c@0xe6828000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6828000 0x425>;
interrupt-parent = <&gic>;
interrupts = <0 187 0x4
0 188 0x4
0 189 0x4
0 190 0x4>;
};
};

22
arch/arm/boot/dts/socfpga.dtsi
View File

@ -25,6 +25,10 @@
ethernet0 = &gmac0;
serial0 = &uart0;
serial1 = &uart1;
timer0 = &timer0;
timer1 = &timer1;
timer2 = &timer2;
timer3 = &timer3;
};
cpus {
@ -98,47 +102,41 @@
interrupts = <1 13 0xf04>;
};
timer0: timer@ffc08000 {
timer0: timer0@ffc08000 {
compatible = "snps,dw-apb-timer-sp";
interrupts = <0 167 4>;
clock-frequency = <200000000>;
reg = <0xffc08000 0x1000>;
};
timer1: timer@ffc09000 {
timer1: timer1@ffc09000 {
compatible = "snps,dw-apb-timer-sp";
interrupts = <0 168 4>;
clock-frequency = <200000000>;
reg = <0xffc09000 0x1000>;
};
timer2: timer@ffd00000 {
timer2: timer2@ffd00000 {
compatible = "snps,dw-apb-timer-osc";
interrupts = <0 169 4>;
clock-frequency = <200000000>;
reg = <0xffd00000 0x1000>;
};
timer3: timer@ffd01000 {
timer3: timer3@ffd01000 {
compatible = "snps,dw-apb-timer-osc";
interrupts = <0 170 4>;
clock-frequency = <200000000>;
reg = <0xffd01000 0x1000>;
};
uart0: uart@ffc02000 {
uart0: serial0@ffc02000 {
compatible = "snps,dw-apb-uart";
reg = <0xffc02000 0x1000>;
clock-frequency = <7372800>;
interrupts = <0 162 4>;
reg-shift = <2>;
reg-io-width = <4>;
};
uart1: uart@ffc03000 {
uart1: serial1@ffc03000 {
compatible = "snps,dw-apb-uart";
reg = <0xffc03000 0x1000>;
clock-frequency = <7372800>;
interrupts = <0 163 4>;
reg-shift = <2>;
reg-io-width = <4>;

34
arch/arm/boot/dts/socfpga_cyclone5.dts
View File

@ -20,7 +20,7 @@
/ {
model = "Altera SOCFPGA Cyclone V";
compatible = "altr,socfpga-cyclone5";
compatible = "altr,socfpga-cyclone5", "altr,socfpga";
chosen {
bootargs = "console=ttyS0,57600";
@ -29,6 +29,36 @@
memory {
name = "memory";
device_type = "memory";
reg = <0x0 0x10000000>; /* 256MB */
reg = <0x0 0x40000000>; /* 1GB */
};
soc {
timer0@ffc08000 {
clock-frequency = <100000000>;
};
timer1@ffc09000 {
clock-frequency = <100000000>;
};
timer2@ffd00000 {
clock-frequency = <25000000>;
};
timer3@ffd01000 {
clock-frequency = <25000000>;
};
serial0@ffc02000 {
clock-frequency = <100000000>;
};
serial1@ffc03000 {
clock-frequency = <100000000>;
};
sysmgr@ffd08000 {
cpu1-start-addr = <0xffd080c4>;
};
};
};

64
arch/arm/boot/dts/socfpga_vt.dts Normal file
View File

@ -0,0 +1,64 @@
/*
* Copyright (C) 2013 Altera Corporation <www.altera.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/dts-v1/;
/include/ "socfpga.dtsi"
/ {
model = "Altera SOCFPGA VT";
compatible = "altr,socfpga-vt", "altr,socfpga";
chosen {
bootargs = "console=ttyS0,57600";
};
memory {
name = "memory";
device_type = "memory";
reg = <0x0 0x40000000>; /* 1 GB */
};
soc {
timer0@ffc08000 {
clock-frequency = <7000000>;
};
timer1@ffc09000 {
clock-frequency = <7000000>;
};
timer2@ffd00000 {
clock-frequency = <7000000>;
};
timer3@ffd01000 {
clock-frequency = <7000000>;
};
serial0@ffc02000 {
clock-frequency = <7372800>;
};
serial1@ffc03000 {
clock-frequency = <7372800>;
};
sysmgr@ffd08000 {
cpu1-start-addr = <0xffd08010>;
};
};
};

21
arch/arm/boot/dts/tegra114-dalmore.dts Normal file
View File

@ -0,0 +1,21 @@
/dts-v1/;
/include/ "tegra114.dtsi"
/ {
model = "NVIDIA Tegra114 Dalmore evaluation board";
compatible = "nvidia,dalmore", "nvidia,tegra114";
memory {
reg = <0x80000000 0x40000000>;
};
serial@70006300 {
status = "okay";
clock-frequency = <408000000>;
};
pmc {
nvidia,invert-interrupt;
};
};

21
arch/arm/boot/dts/tegra114-pluto.dts Normal file
View File

@ -0,0 +1,21 @@
/dts-v1/;
/include/ "tegra114.dtsi"
/ {
model = "NVIDIA Tegra114 Pluto evaluation board";
compatible = "nvidia,pluto", "nvidia,tegra114";
memory {
reg = <0x80000000 0x40000000>;
};
serial@70006300 {
status = "okay";
clock-frequency = <408000000>;
};
pmc {
nvidia,invert-interrupt;
};
};

153
arch/arm/boot/dts/tegra114.dtsi Normal file
View File

@ -0,0 +1,153 @@
/include/ "skeleton.dtsi"
/ {
compatible = "nvidia,tegra114";
interrupt-parent = <&gic>;
gic: interrupt-controller {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x50041000 0x1000>,
<0x50042000 0x1000>,
<0x50044000 0x2000>,
<0x50046000 0x2000>;
interrupts = <1 9 0xf04>;
};
timer@60005000 {
compatible = "nvidia,tegra114-timer", "nvidia,tegra20-timer";
reg = <0x60005000 0x400>;
interrupts = <0 0 0x04
0 1 0x04
0 41 0x04
0 42 0x04
0 121 0x04
0 122 0x04>;
};
tegra_car: clock {
compatible = "nvidia,tegra114-car, nvidia,tegra30-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
};
ahb: ahb {
compatible = "nvidia,tegra114-ahb", "nvidia,tegra30-ahb";
reg = <0x6000c004 0x14c>;
};
gpio: gpio {
compatible = "nvidia,tegra114-gpio", "nvidia,tegra30-gpio";
reg = <0x6000d000 0x1000>;
interrupts = <0 32 0x04
0 33 0x04
0 34 0x04
0 35 0x04
0 55 0x04
0 87 0x04
0 89 0x04
0 125 0x04>;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
};
pinmux: pinmux {
compatible = "nvidia,tegra114-pinmux";
reg = <0x70000868 0x148 /* Pad control registers */
0x70003000 0x40c>; /* Mux registers */
};
serial@70006000 {
compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <0 36 0x04>;
status = "disabled";
};
serial@70006040 {
compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <0 37 0x04>;
status = "disabled";
};
serial@70006200 {
compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <0 46 0x04>;
status = "disabled";
};
serial@70006300 {
compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <0 90 0x04>;
status = "disabled";
};
rtc {
compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
interrupts = <0 2 0x04>;
};
pmc {
compatible = "nvidia,tegra114-pmc", "nvidia,tegra30-pmc";
reg = <0x7000e400 0x400>;
};
iommu {
compatible = "nvidia,tegra114-smmu", "nvidia,tegra30-smmu";
reg = <0x7000f010 0x02c
0x7000f1f0 0x010
0x7000f228 0x074>;
nvidia,#asids = <4>;
dma-window = <0 0x40000000>;
nvidia,swgroups = <0x18659fe>;
nvidia,ahb = <&ahb>;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <1>;
};
cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <2>;
};
cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <3>;
};
};
timer {
compatible = "arm,armv7-timer";
interrupts = <1 13 0xf08>,
<1 14 0xf08>,
<1 11 0xf08>,
<1 10 0xf08>;
};
};

4
arch/arm/boot/dts/tegra20-harmony.dts
View File

@ -432,6 +432,10 @@
status = "okay";
};
usb-phy@c5004400 {
nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
};
sdhci@c8000200 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */

6
arch/arm/boot/dts/tegra20-paz00.dts
View File

@ -266,6 +266,8 @@
clock-frequency = <80000>;
request-gpios = <&gpio 170 0>; /* gpio PV2 */
slave-addr = <138>;
clocks = <&tegra_car 67>, <&tegra_car 124>;
clock-names = "div-clk", "fast-clk";
};
i2c@7000d000 {
@ -418,6 +420,10 @@
status = "okay";
};
usb-phy@c5004400 {
nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */
};
sdhci@c8000000 {
status = "okay";
cd-gpios = <&gpio 173 0>; /* gpio PV5 */

4
arch/arm/boot/dts/tegra20-seaboard.dts
View File

@ -561,6 +561,10 @@
status = "okay";
};
usb-phy@c5004400 {
nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
};
sdhci@c8000000 {
status = "okay";
power-gpios = <&gpio 86 0>; /* gpio PK6 */

4
arch/arm/boot/dts/tegra20-trimslice.dts
View File

@ -310,6 +310,10 @@
status = "okay";
};
usb-phy@c5004400 {
nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */
};
sdhci@c8000000 {
status = "okay";
bus-width = <4>;

4
arch/arm/boot/dts/tegra20-ventana.dts
View File

@ -497,6 +497,10 @@
status = "okay";
};
usb-phy@c5004400 {
nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
};
sdhci@c8000000 {
status = "okay";
power-gpios = <&gpio 86 0>; /* gpio PK6 */

96
arch/arm/boot/dts/tegra20.dtsi
View File

@ -9,6 +9,7 @@
reg = <0x50000000 0x00024000>;
interrupts = <0 65 0x04 /* mpcore syncpt */
0 67 0x04>; /* mpcore general */
clocks = <&tegra_car 28>;
#address-cells = <1>;
#size-cells = <1>;
@ -19,41 +20,49 @@
compatible = "nvidia,tegra20-mpe";
reg = <0x54040000 0x00040000>;
interrupts = <0 68 0x04>;
clocks = <&tegra_car 60>;
};
vi {
compatible = "nvidia,tegra20-vi";
reg = <0x54080000 0x00040000>;
interrupts = <0 69 0x04>;
clocks = <&tegra_car 100>;
};
epp {
compatible = "nvidia,tegra20-epp";
reg = <0x540c0000 0x00040000>;
interrupts = <0 70 0x04>;
clocks = <&tegra_car 19>;
};
isp {
compatible = "nvidia,tegra20-isp";
reg = <0x54100000 0x00040000>;
interrupts = <0 71 0x04>;
clocks = <&tegra_car 23>;
};
gr2d {
compatible = "nvidia,tegra20-gr2d";
reg = <0x54140000 0x00040000>;
interrupts = <0 72 0x04>;
clocks = <&tegra_car 21>;
};
gr3d {
compatible = "nvidia,tegra20-gr3d";
reg = <0x54180000 0x00040000>;
clocks = <&tegra_car 24>;
};
dc@54200000 {
compatible = "nvidia,tegra20-dc";
reg = <0x54200000 0x00040000>;
interrupts = <0 73 0x04>;
clocks = <&tegra_car 27>, <&tegra_car 121>;
clock-names = "disp1", "parent";
rgb {
status = "disabled";
@ -64,6 +73,8 @@
compatible = "nvidia,tegra20-dc";
reg = <0x54240000 0x00040000>;
interrupts = <0 74 0x04>;
clocks = <&tegra_car 26>, <&tegra_car 121>;
clock-names = "disp2", "parent";
rgb {
status = "disabled";
@ -74,6 +85,8 @@
compatible = "nvidia,tegra20-hdmi";
reg = <0x54280000 0x00040000>;
interrupts = <0 75 0x04>;
clocks = <&tegra_car 51>, <&tegra_car 117>;
clock-names = "hdmi", "parent";
status = "disabled";
};
@ -81,12 +94,14 @@
compatible = "nvidia,tegra20-tvo";
reg = <0x542c0000 0x00040000>;
interrupts = <0 76 0x04>;
clocks = <&tegra_car 102>;
status = "disabled";
};
dsi {
compatible = "nvidia,tegra20-dsi";
reg = <0x54300000 0x00040000>;
clocks = <&tegra_car 48>;
status = "disabled";
};
};
@ -123,6 +138,12 @@
0 42 0x04>;
};
tegra_car: clock {
compatible = "nvidia,tegra20-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
};
apbdma: dma {
compatible = "nvidia,tegra20-apbdma";
reg = <0x6000a000 0x1200>;
@ -142,6 +163,7 @@
0 117 0x04
0 118 0x04
0 119 0x04>;
clocks = <&tegra_car 34>;
};
ahb {
@ -183,6 +205,7 @@
reg = <0x70002800 0x200>;
interrupts = <0 13 0x04>;
nvidia,dma-request-selector = <&apbdma 2>;
clocks = <&tegra_car 11>;
status = "disabled";
};
@ -191,6 +214,7 @@
reg = <0x70002a00 0x200>;
interrupts = <0 3 0x04>;
nvidia,dma-request-selector = <&apbdma 1>;
clocks = <&tegra_car 18>;
status = "disabled";
};
@ -199,6 +223,7 @@
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <0 36 0x04>;
clocks = <&tegra_car 6>;
status = "disabled";
};
@ -207,6 +232,7 @@
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <0 37 0x04>;
clocks = <&tegra_car 96>;
status = "disabled";
};
@ -215,6 +241,7 @@
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <0 46 0x04>;
clocks = <&tegra_car 55>;
status = "disabled";
};
@ -223,6 +250,7 @@
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <0 90 0x04>;
clocks = <&tegra_car 65>;
status = "disabled";
};
@ -231,6 +259,7 @@
reg = <0x70006400 0x100>;
reg-shift = <2>;
interrupts = <0 91 0x04>;
clocks = <&tegra_car 66>;
status = "disabled";
};
@ -238,6 +267,7 @@
compatible = "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
clocks = <&tegra_car 17>;
};
rtc {
@ -252,6 +282,8 @@
interrupts = <0 38 0x04>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 12>, <&tegra_car 124>;
clock-names = "div-clk", "fast-clk";
status = "disabled";
};
@ -262,6 +294,7 @@
nvidia,dma-request-selector = <&apbdma 11>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 43>;
status = "disabled";
};
@ -271,6 +304,8 @@
interrupts = <0 84 0x04>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 54>, <&tegra_car 124>;
clock-names = "div-clk", "fast-clk";
status = "disabled";
};
@ -280,6 +315,8 @@
interrupts = <0 92 0x04>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 67>, <&tegra_car 124>;
clock-names = "div-clk", "fast-clk";
status = "disabled";
};
@ -289,6 +326,8 @@
interrupts = <0 53 0x04>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 47>, <&tegra_car 124>;
clock-names = "div-clk", "fast-clk";
status = "disabled";
};
@ -299,6 +338,7 @@
nvidia,dma-request-selector = <&apbdma 15>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 41>;
status = "disabled";
};
@ -309,6 +349,7 @@
nvidia,dma-request-selector = <&apbdma 16>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 44>;
status = "disabled";
};
@ -319,6 +360,7 @@
nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 46>;
status = "disabled";
};
@ -329,6 +371,7 @@
nvidia,dma-request-selector = <&apbdma 18>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 68>;
status = "disabled";
};
@ -357,12 +400,40 @@
#size-cells = <0>;
};
phy1: usb-phy@c5000400 {
compatible = "nvidia,tegra20-usb-phy";
reg = <0xc5000400 0x3c00>;
phy_type = "utmi";
nvidia,has-legacy-mode;
clocks = <&tegra_car 22>, <&tegra_car 127>;
clock-names = "phy", "pll_u";
};
phy2: usb-phy@c5004400 {
compatible = "nvidia,tegra20-usb-phy";
reg = <0xc5004400 0x3c00>;
phy_type = "ulpi";
clocks = <&tegra_car 94>, <&tegra_car 127>;
clock-names = "phy", "pll_u";
};
phy3: usb-phy@c5008400 {
compatible = "nvidia,tegra20-usb-phy";
reg = <0xc5008400 0x3C00>;
phy_type = "utmi";
clocks = <&tegra_car 22>, <&tegra_car 127>;
clock-names = "phy", "pll_u";
};
usb@c5000000 {
compatible = "nvidia,tegra20-ehci", "usb-ehci";
reg = <0xc5000000 0x4000>;
interrupts = <0 20 0x04>;
phy_type = "utmi";
nvidia,has-legacy-mode;
clocks = <&tegra_car 22>;
nvidia,needs-double-reset;
nvidia,phy = <&phy1>;
status = "disabled";
};
@ -371,6 +442,8 @@
reg = <0xc5004000 0x4000>;
interrupts = <0 21 0x04>;
phy_type = "ulpi";
clocks = <&tegra_car 58>;
nvidia,phy = <&phy2>;
status = "disabled";
};
@ -379,6 +452,8 @@
reg = <0xc5008000 0x4000>;
interrupts = <0 97 0x04>;
phy_type = "utmi";
clocks = <&tegra_car 59>;
nvidia,phy = <&phy3>;
status = "disabled";
};
@ -386,6 +461,7 @@
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000000 0x200>;
interrupts = <0 14 0x04>;
clocks = <&tegra_car 14>;
status = "disabled";
};
@ -393,6 +469,7 @@
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000200 0x200>;
interrupts = <0 15 0x04>;
clocks = <&tegra_car 9>;
status = "disabled";
};
@ -400,6 +477,7 @@
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000400 0x200>;
interrupts = <0 19 0x04>;
clocks = <&tegra_car 69>;
status = "disabled";
};
@ -407,9 +485,27 @@
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000600 0x200>;
interrupts = <0 31 0x04>;
clocks = <&tegra_car 15>;
status = "disabled";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
};
};
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <0 56 0x04

91
arch/arm/boot/dts/tegra30.dtsi
View File

@ -9,6 +9,7 @@
reg = <0x50000000 0x00024000>;
interrupts = <0 65 0x04 /* mpcore syncpt */
0 67 0x04>; /* mpcore general */
clocks = <&tegra_car 28>;
#address-cells = <1>;
#size-cells = <1>;
@ -19,41 +20,50 @@
compatible = "nvidia,tegra30-mpe";
reg = <0x54040000 0x00040000>;
interrupts = <0 68 0x04>;
clocks = <&tegra_car 60>;
};
vi {
compatible = "nvidia,tegra30-vi";
reg = <0x54080000 0x00040000>;
interrupts = <0 69 0x04>;
clocks = <&tegra_car 164>;
};
epp {
compatible = "nvidia,tegra30-epp";
reg = <0x540c0000 0x00040000>;
interrupts = <0 70 0x04>;
clocks = <&tegra_car 19>;
};
isp {
compatible = "nvidia,tegra30-isp";
reg = <0x54100000 0x00040000>;
interrupts = <0 71 0x04>;
clocks = <&tegra_car 23>;
};
gr2d {
compatible = "nvidia,tegra30-gr2d";
reg = <0x54140000 0x00040000>;
interrupts = <0 72 0x04>;
clocks = <&tegra_car 21>;
};
gr3d {
compatible = "nvidia,tegra30-gr3d";
reg = <0x54180000 0x00040000>;
clocks = <&tegra_car 24 &tegra_car 98>;
clock-names = "3d", "3d2";
};
dc@54200000 {
compatible = "nvidia,tegra30-dc";
reg = <0x54200000 0x00040000>;
interrupts = <0 73 0x04>;
clocks = <&tegra_car 27>, <&tegra_car 179>;
clock-names = "disp1", "parent";
rgb {
status = "disabled";
@ -64,6 +74,8 @@
compatible = "nvidia,tegra30-dc";
reg = <0x54240000 0x00040000>;
interrupts = <0 74 0x04>;
clocks = <&tegra_car 26>, <&tegra_car 179>;
clock-names = "disp2", "parent";
rgb {
status = "disabled";
@ -74,6 +86,8 @@
compatible = "nvidia,tegra30-hdmi";
reg = <0x54280000 0x00040000>;
interrupts = <0 75 0x04>;
clocks = <&tegra_car 51>, <&tegra_car 189>;
clock-names = "hdmi", "parent";
status = "disabled";
};
@ -81,12 +95,14 @@
compatible = "nvidia,tegra30-tvo";
reg = <0x542c0000 0x00040000>;
interrupts = <0 76 0x04>;
clocks = <&tegra_car 169>;
status = "disabled";
};
dsi {
compatible = "nvidia,tegra30-dsi";
reg = <0x54300000 0x00040000>;
clocks = <&tegra_car 48>;
status = "disabled";
};
};
@ -125,6 +141,12 @@
0 122 0x04>;
};
tegra_car: clock {
compatible = "nvidia,tegra30-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
};
apbdma: dma {
compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
reg = <0x6000a000 0x1400>;
@ -160,6 +182,7 @@
0 141 0x04
0 142 0x04
0 143 0x04>;
clocks = <&tegra_car 34>;
};
ahb: ahb {
@ -195,6 +218,7 @@
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <0 36 0x04>;
clocks = <&tegra_car 6>;
status = "disabled";
};
@ -203,6 +227,7 @@
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <0 37 0x04>;
clocks = <&tegra_car 160>;
status = "disabled";
};
@ -211,6 +236,7 @@
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <0 46 0x04>;
clocks = <&tegra_car 55>;
status = "disabled";
};
@ -219,6 +245,7 @@
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <0 90 0x04>;
clocks = <&tegra_car 65>;
status = "disabled";
};
@ -227,6 +254,7 @@
reg = <0x70006400 0x100>;
reg-shift = <2>;
interrupts = <0 91 0x04>;
clocks = <&tegra_car 66>;
status = "disabled";
};
@ -234,6 +262,7 @@
compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
clocks = <&tegra_car 17>;
};
rtc {
@ -248,6 +277,8 @@
interrupts = <0 38 0x04>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 12>, <&tegra_car 182>;
clock-names = "div-clk", "fast-clk";
status = "disabled";
};
@ -257,6 +288,8 @@
interrupts = <0 84 0x04>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 54>, <&tegra_car 182>;
clock-names = "div-clk", "fast-clk";
status = "disabled";
};
@ -266,6 +299,8 @@
interrupts = <0 92 0x04>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 67>, <&tegra_car 182>;
clock-names = "div-clk", "fast-clk";
status = "disabled";
};
@ -275,6 +310,8 @@
interrupts = <0 120 0x04>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 103>, <&tegra_car 182>;
clock-names = "div-clk", "fast-clk";
status = "disabled";
};
@ -284,6 +321,8 @@
interrupts = <0 53 0x04>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 47>, <&tegra_car 182>;
clock-names = "div-clk", "fast-clk";
status = "disabled";
};
@ -294,6 +333,7 @@
nvidia,dma-request-selector = <&apbdma 15>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 41>;
status = "disabled";
};
@ -304,6 +344,7 @@
nvidia,dma-request-selector = <&apbdma 16>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 44>;
status = "disabled";
};
@ -314,6 +355,7 @@
nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 46>;
status = "disabled";
};
@ -324,6 +366,7 @@
nvidia,dma-request-selector = <&apbdma 18>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 68>;
status = "disabled";
};
@ -334,6 +377,7 @@
nvidia,dma-request-selector = <&apbdma 27>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 104>;
status = "disabled";
};
@ -344,6 +388,7 @@
nvidia,dma-request-selector = <&apbdma 28>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 105>;
status = "disabled";
};
@ -377,7 +422,13 @@
0x70080200 0x100>;
interrupts = <0 103 0x04>;
nvidia,dma-request-selector = <&apbdma 1>;
clocks = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>,
<&tegra_car 11>, <&tegra_car 18>, <&tegra_car 101>,
<&tegra_car 102>, <&tegra_car 108>, <&tegra_car 109>,
<&tegra_car 110>, <&tegra_car 162>;
clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
"i2s3", "i2s4", "dam0", "dam1", "dam2",
"spdif_in";
ranges;
#address-cells = <1>;
#size-cells = <1>;
@ -386,6 +437,7 @@
compatible = "nvidia,tegra30-i2s";
reg = <0x70080300 0x100>;
nvidia,ahub-cif-ids = <4 4>;
clocks = <&tegra_car 30>;
status = "disabled";
};
@ -393,6 +445,7 @@
compatible = "nvidia,tegra30-i2s";
reg = <0x70080400 0x100>;
nvidia,ahub-cif-ids = <5 5>;
clocks = <&tegra_car 11>;
status = "disabled";
};
@ -400,6 +453,7 @@
compatible = "nvidia,tegra30-i2s";
reg = <0x70080500 0x100>;
nvidia,ahub-cif-ids = <6 6>;
clocks = <&tegra_car 18>;
status = "disabled";
};
@ -407,6 +461,7 @@
compatible = "nvidia,tegra30-i2s";
reg = <0x70080600 0x100>;
nvidia,ahub-cif-ids = <7 7>;
clocks = <&tegra_car 101>;
status = "disabled";
};
@ -414,6 +469,7 @@
compatible = "nvidia,tegra30-i2s";
reg = <0x70080700 0x100>;
nvidia,ahub-cif-ids = <8 8>;
clocks = <&tegra_car 102>;
status = "disabled";
};
};
@ -422,6 +478,7 @@
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000000 0x200>;
interrupts = <0 14 0x04>;
clocks = <&tegra_car 14>;
status = "disabled";
};
@ -429,6 +486,7 @@
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000200 0x200>;
interrupts = <0 15 0x04>;
clocks = <&tegra_car 9>;
status = "disabled";
};
@ -436,6 +494,7 @@
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000400 0x200>;
interrupts = <0 19 0x04>;
clocks = <&tegra_car 69>;
status = "disabled";
};
@ -443,9 +502,39 @@
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000600 0x200>;
interrupts = <0 31 0x04>;
clocks = <&tegra_car 15>;
status = "disabled";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
};
cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <2>;
};
cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <3>;
};
};
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <0 144 0x04

47
arch/arm/boot/dts/wm8850-w70v2.dts Normal file
View File

@ -0,0 +1,47 @@
/*
* wm8850-w70v2.dts
* - Device tree file for Wondermedia WM8850 Tablet
* - 'W70-V2' mainboard
* - HongLianYing 'HLY070ML268-21A' 7" LCD panel
*
* Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
*
* Licensed under GPLv2 or later
*/
/dts-v1/;
/include/ "wm8850.dtsi"
/ {
model = "Wondermedia WM8850-W70v2 Tablet";
/*
* Display node is based on Sascha Hauer's patch on dri-devel.
* Added a bpp property to calculate the size of the framebuffer
* until the binding is formalized.
*/
display: display@0 {
modes {
mode0: mode@0 {
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hfront-porch = <40>;
hsync-len = <0>;
vback-porch = <32>;
vfront-porch = <11>;
vsync-len = <1>;
clock = <0>; /* unused but required */
bpp = <16>; /* non-standard but required */
};
};
};
backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 50000 1>; /* duty inverted */
brightness-levels = <0 40 60 80 100 130 190 255>;
default-brightness-level = <5>;
};
};

224
arch/arm/boot/dts/wm8850.dtsi Normal file
View File

@ -0,0 +1,224 @@
/*
* wm8850.dtsi - Device tree file for Wondermedia WM8850 SoC
*
* Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
*
* Licensed under GPLv2 or later
*/
/include/ "skeleton.dtsi"
/ {
compatible = "wm,wm8850";
aliases {
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges;
interrupt-parent = <&intc0>;
intc0: interrupt-controller@d8140000 {
compatible = "via,vt8500-intc";
interrupt-controller;
reg = <0xd8140000 0x10000>;
#interrupt-cells = <1>;
};
/* Secondary IC cascaded to intc0 */
intc1: interrupt-controller@d8150000 {
compatible = "via,vt8500-intc";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0xD8150000 0x10000>;
interrupts = <56 57 58 59 60 61 62 63>;
};
gpio: gpio-controller@d8110000 {
compatible = "wm,wm8650-gpio";
gpio-controller;
reg = <0xd8110000 0x10000>;
#gpio-cells = <3>;
};
pmc@d8130000 {
compatible = "via,vt8500-pmc";
reg = <0xd8130000 0x1000>;
clocks {
#address-cells = <1>;
#size-cells = <0>;
ref25: ref25M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
};
ref24: ref24M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
plla: plla {
#clock-cells = <0>;
compatible = "wm,wm8750-pll-clock";
clocks = <&ref25>;
reg = <0x200>;
};
pllb: pllb {
#clock-cells = <0>;
compatible = "wm,wm8750-pll-clock";
clocks = <&ref25>;
reg = <0x204>;
};
clkuart0: uart0 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x254>;
enable-bit = <24>;
};
clkuart1: uart1 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x254>;
enable-bit = <25>;
};
clkuart2: uart2 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x254>;
enable-bit = <26>;
};
clkuart3: uart3 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x254>;
enable-bit = <27>;
};
clkpwm: pwm {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&pllb>;
divisor-reg = <0x350>;
enable-reg = <0x250>;
enable-bit = <17>;
};
clksdhc: sdhc {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&pllb>;
divisor-reg = <0x330>;
divisor-mask = <0x3f>;
enable-reg = <0x250>;
enable-bit = <0>;
};
};
};
fb@d8051700 {
compatible = "wm,wm8505-fb";
reg = <0xd8051700 0x200>;
display = <&display>;
default-mode = <&mode0>;
};
ge_rops@d8050400 {
compatible = "wm,prizm-ge-rops";
reg = <0xd8050400 0x100>;
};
pwm: pwm@d8220000 {
#pwm-cells = <3>;
compatible = "via,vt8500-pwm";
reg = <0xd8220000 0x100>;
clocks = <&clkpwm>;
};
timer@d8130100 {
compatible = "via,vt8500-timer";
reg = <0xd8130100 0x28>;
interrupts = <36>;
};
ehci@d8007900 {
compatible = "via,vt8500-ehci";
reg = <0xd8007900 0x200>;
interrupts = <26>;
};
uhci@d8007b00 {
compatible = "platform-uhci";
reg = <0xd8007b00 0x200>;
interrupts = <26>;
};
uhci@d8008d00 {
compatible = "platform-uhci";
reg = <0xd8008d00 0x200>;
interrupts = <26>;
};
uart0: uart@d8200000 {
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
clocks = <&clkuart0>;
};
uart1: uart@d82b0000 {
compatible = "via,vt8500-uart";
reg = <0xd82b0000 0x1040>;
interrupts = <33>;
clocks = <&clkuart1>;
};
uart2: uart@d8210000 {
compatible = "via,vt8500-uart";
reg = <0xd8210000 0x1040>;
interrupts = <47>;
clocks = <&clkuart2>;
};
uart3: uart@d82c0000 {
compatible = "via,vt8500-uart";
reg = <0xd82c0000 0x1040>;
interrupts = <50>;
clocks = <&clkuart3>;
};
rtc@d8100000 {
compatible = "via,vt8500-rtc";
reg = <0xd8100000 0x10000>;
interrupts = <48>;
};
sdhc@d800a000 {
compatible = "wm,wm8505-sdhc";
reg = <0xd800a000 0x1000>;
interrupts = <20 21>;
clocks = <&clksdhc>;
bus-width = <4>;
sdon-inverted;
};
};
};

8
arch/arm/configs/imx_v6_v7_defconfig
View File

@ -19,6 +19,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_ARCH_MXC=y
CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_MACH_IMX31_DT=y
CONFIG_MACH_MX31LILLY=y
CONFIG_MACH_MX31LITE=y
CONFIG_MACH_PCM037=y
@ -150,6 +151,7 @@ CONFIG_MFD_MC13XXX_I2C=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_DA9052=y
CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_MEDIA_SUPPORT=y
@ -158,6 +160,7 @@ CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_SOC_CAMERA=y
CONFIG_SOC_CAMERA_OV2640=y
CONFIG_DRM=y
CONFIG_VIDEO_MX3=y
CONFIG_FB=y
CONFIG_LCD_PLATFORM=y
@ -196,9 +199,14 @@ CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_MXC=y
CONFIG_RTC_DRV_SNVS=y
CONFIG_DMADEVICES=y
CONFIG_IMX_SDMA=y
CONFIG_MXS_DMA=y
CONFIG_STAGING=y
CONFIG_DRM_IMX=y
CONFIG_DRM_IMX_IPUV3_CORE=y
CONFIG_DRM_IMX_IPUV3=y
CONFIG_COMMON_CLK_DEBUG=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y

1
arch/arm/configs/kirkwood_defconfig
View File

@ -56,6 +56,7 @@ CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_KIRKWOOD=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y

64
arch/arm/configs/mxs_defconfig
View File

@ -1,5 +1,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
@ -8,7 +10,6 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_PERF_EVENTS=y
@ -24,8 +25,6 @@ CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_ARCH_MXS=y
CONFIG_MACH_MXS_DT=y
# CONFIG_ARM_THUMB is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
CONFIG_AUTO_ZRELADDR=y
@ -46,25 +45,34 @@ CONFIG_SYN_COOKIES=y
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_DEV=m
CONFIG_CAN_FLEXCAN=m
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
# CONFIG_BLK_DEV is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_M25P80
CONFIG_MTD_M25P80=y
# CONFIG_M25PXX_USE_FAST_READ is not set
CONFIG_MTD_SST25L=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_GPMI_NAND=y
CONFIG_MTD_UBI=y
# CONFIG_BLK_DEV is not set
CONFIG_EEPROM_AT24=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ENC28J60=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC95XX=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_SMSC_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_MICREL_PHY=y
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=m
@ -91,21 +99,6 @@ CONFIG_SPI_MXS=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
# CONFIG_MFD_SUPPORT is not set
CONFIG_DISPLAY_SUPPORT=m
# CONFIG_HID_SUPPORT is not set
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_JACK=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_ARM=y
CONFIG_SND_SOC=y
CONFIG_SND_MXS_SOC=y
CONFIG_SND_SOC_MXS_SGTL5000=y
CONFIG_SND_SOC_I2C_AND_SPI=y
CONFIG_SND_SOC_SGTL5000=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_FB=y
@ -117,13 +110,16 @@ CONFIG_BACKLIGHT_PWM=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_MXS_SOC=y
CONFIG_SND_SOC_MXS_SGTL5000=y
CONFIG_USB=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_STORAGE=y
CONFIG_USB_MXS_PHY=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_MMC=y
CONFIG_MMC_MXS=y
CONFIG_NEW_LEDS=y
@ -147,16 +143,23 @@ CONFIG_COMMON_CLK_DEBUG=y
CONFIG_IIO=y
CONFIG_PWM=y
CONFIG_PWM_MXS=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
# CONFIG_DNOTIFY is not set
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
CONFIG_CACHEFILES=m
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RUBIN=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
@ -170,17 +173,12 @@ CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_TIMER_STATS=y
CONFIG_PROVE_LOCKING=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_INFO=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_STRICT_DEVMEM=y
CONFIG_DEBUG_USER=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_CRC_ITU_T=m

3
arch/arm/configs/prima2_defconfig
View File

@ -11,6 +11,9 @@ CONFIG_PARTITION_ADVANCED=y
CONFIG_BSD_DISKLABEL=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_ARCH_SIRF=y
# CONFIG_SWP_EMULATE is not set
CONFIG_SMP=y
CONFIG_SCHED_MC=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_KEXEC=y

17
arch/arm/include/asm/smp_scu.h
View File

@ -6,6 +6,23 @@
#define SCU_PM_POWEROFF 3
#ifndef __ASSEMBLER__
#include <asm/cputype.h>
static inline bool scu_a9_has_base(void)
{
return read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9;
}
static inline unsigned long scu_a9_get_base(void)
{
unsigned long pa;
asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (pa));
return pa;
}
unsigned int scu_get_core_count(void __iomem *);
int scu_power_mode(void __iomem *, unsigned int);

88
arch/arm/include/debug/imx-uart.h Normal file
View File

@ -0,0 +1,88 @@
/*
* Copyright (C) 2012 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __DEBUG_IMX_UART_H
#define __DEBUG_IMX_UART_H
#define IMX1_UART1_BASE_ADDR 0x00206000
#define IMX1_UART2_BASE_ADDR 0x00207000
#define IMX1_UART_BASE_ADDR(n) IMX1_UART##n##_BASE_ADDR
#define IMX1_UART_BASE(n) IMX1_UART_BASE_ADDR(n)
#define IMX21_UART1_BASE_ADDR 0x1000a000
#define IMX21_UART2_BASE_ADDR 0x1000b000
#define IMX21_UART3_BASE_ADDR 0x1000c000
#define IMX21_UART4_BASE_ADDR 0x1000d000
#define IMX21_UART_BASE_ADDR(n) IMX21_UART##n##_BASE_ADDR
#define IMX21_UART_BASE(n) IMX21_UART_BASE_ADDR(n)
#define IMX25_UART1_BASE_ADDR 0x43f90000
#define IMX25_UART2_BASE_ADDR 0x43f94000
#define IMX25_UART3_BASE_ADDR 0x5000c000
#define IMX25_UART4_BASE_ADDR 0x50008000
#define IMX25_UART5_BASE_ADDR 0x5002c000
#define IMX25_UART_BASE_ADDR(n) IMX25_UART##n##_BASE_ADDR
#define IMX25_UART_BASE(n) IMX25_UART_BASE_ADDR(n)
#define IMX31_UART1_BASE_ADDR 0x43f90000
#define IMX31_UART2_BASE_ADDR 0x43f94000
#define IMX31_UART3_BASE_ADDR 0x5000c000
#define IMX31_UART4_BASE_ADDR 0x43fb0000
#define IMX31_UART5_BASE_ADDR 0x43fb4000
#define IMX31_UART_BASE_ADDR(n) IMX31_UART##n##_BASE_ADDR
#define IMX31_UART_BASE(n) IMX31_UART_BASE_ADDR(n)
#define IMX35_UART1_BASE_ADDR 0x43f90000
#define IMX35_UART2_BASE_ADDR 0x43f94000
#define IMX35_UART3_BASE_ADDR 0x5000c000
#define IMX35_UART_BASE_ADDR(n) IMX35_UART##n##_BASE_ADDR
#define IMX35_UART_BASE(n) IMX35_UART_BASE_ADDR(n)
#define IMX51_UART1_BASE_ADDR 0x73fbc000
#define IMX51_UART2_BASE_ADDR 0x73fc0000
#define IMX51_UART3_BASE_ADDR 0x7000c000
#define IMX51_UART_BASE_ADDR(n) IMX51_UART##n##_BASE_ADDR
#define IMX51_UART_BASE(n) IMX51_UART_BASE_ADDR(n)
#define IMX53_UART1_BASE_ADDR 0x53fbc000
#define IMX53_UART2_BASE_ADDR 0x53fc0000
#define IMX53_UART3_BASE_ADDR 0x5000c000
#define IMX53_UART4_BASE_ADDR 0x53ff0000
#define IMX53_UART5_BASE_ADDR 0x63f90000
#define IMX53_UART_BASE_ADDR(n) IMX53_UART##n##_BASE_ADDR
#define IMX53_UART_BASE(n) IMX53_UART_BASE_ADDR(n)
#define IMX6Q_UART1_BASE_ADDR 0x02020000
#define IMX6Q_UART2_BASE_ADDR 0x021e8000
#define IMX6Q_UART3_BASE_ADDR 0x021ec000
#define IMX6Q_UART4_BASE_ADDR 0x021f0000
#define IMX6Q_UART5_BASE_ADDR 0x021f4000
#define IMX6Q_UART_BASE_ADDR(n) IMX6Q_UART##n##_BASE_ADDR
#define IMX6Q_UART_BASE(n) IMX6Q_UART_BASE_ADDR(n)
#define IMX_DEBUG_UART_BASE(soc) soc##_UART_BASE(CONFIG_DEBUG_IMX_UART_PORT)
#ifdef CONFIG_DEBUG_IMX1_UART
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX1)
#elif defined(CONFIG_DEBUG_IMX21_IMX27_UART)
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX21)
#elif defined(CONFIG_DEBUG_IMX25_UART)
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX25)
#elif defined(CONFIG_DEBUG_IMX31_UART)
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX31)
#elif defined(CONFIG_DEBUG_IMX35_UART)
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX35)
#elif defined(CONFIG_DEBUG_IMX51_UART)
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX51)
#elif defined(CONFIG_DEBUG_IMX53_UART)
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX53)
#elif defined(CONFIG_DEBUG_IMX6Q_UART)
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6Q)
#endif
#endif /* __DEBUG_IMX_UART_H */

29
arch/arm/include/debug/imx.S
View File

@ -10,35 +10,8 @@
* published by the Free Software Foundation.
*
*/
#define IMX6Q_UART1_BASE_ADDR 0x02020000
#define IMX6Q_UART2_BASE_ADDR 0x021e8000
#define IMX6Q_UART3_BASE_ADDR 0x021ec000
#define IMX6Q_UART4_BASE_ADDR 0x021f0000
#define IMX6Q_UART5_BASE_ADDR 0x021f4000
/*
* IMX6Q_UART_BASE_ADDR is put in the middle to force the expansion
* of IMX6Q_UART##n##_BASE_ADDR.
*/
#define IMX6Q_UART_BASE_ADDR(n) IMX6Q_UART##n##_BASE_ADDR
#define IMX6Q_UART_BASE(n) IMX6Q_UART_BASE_ADDR(n)
#define IMX6Q_DEBUG_UART_BASE IMX6Q_UART_BASE(CONFIG_DEBUG_IMX6Q_UART_PORT)
#ifdef CONFIG_DEBUG_IMX1_UART
#define UART_PADDR 0x00206000
#elif defined (CONFIG_DEBUG_IMX25_UART)
#define UART_PADDR 0x43f90000
#elif defined (CONFIG_DEBUG_IMX21_IMX27_UART)
#define UART_PADDR 0x1000a000
#elif defined (CONFIG_DEBUG_IMX31_IMX35_UART)
#define UART_PADDR 0x43f90000
#elif defined (CONFIG_DEBUG_IMX51_UART)
#define UART_PADDR 0x73fbc000
#elif defined (CONFIG_DEBUG_IMX53_UART)
#define UART_PADDR 0x53fbc000
#elif defined (CONFIG_DEBUG_IMX6Q_UART)
#define UART_PADDR IMX6Q_DEBUG_UART_BASE
#endif
#include "imx-uart.h"
/*
* FIXME: This is a copy of IMX_IO_P2V in hardware.h, and needs to

28
arch/arm/mach-bcm2835/bcm2835.c
View File

@ -26,11 +26,13 @@
#include <mach/bcm2835_soc.h>
#define PM_RSTC 0x1c
#define PM_RSTS 0x20
#define PM_WDOG 0x24
#define PM_PASSWORD 0x5a000000
#define PM_RSTC_WRCFG_MASK 0x00000030
#define PM_RSTC_WRCFG_FULL_RESET 0x00000020
#define PM_RSTS_HADWRH_SET 0x00000040
static void __iomem *wdt_regs;
@ -67,6 +69,29 @@ static void bcm2835_restart(char mode, const char *cmd)
mdelay(1);
}
/*
* We can't really power off, but if we do the normal reset scheme, and
* indicate to bootcode.bin not to reboot, then most of the chip will be
* powered off.
*/
static void bcm2835_power_off(void)
{
u32 val;
/*
* We set the watchdog hard reset bit here to distinguish this reset
* from the normal (full) reset. bootcode.bin will not reboot after a
* hard reset.
*/
val = readl_relaxed(wdt_regs + PM_RSTS);
val &= ~PM_RSTC_WRCFG_MASK;
val |= PM_PASSWORD | PM_RSTS_HADWRH_SET;
writel_relaxed(val, wdt_regs + PM_RSTS);
/* Continue with normal reset mechanism */
bcm2835_restart(0, "");
}
static struct map_desc io_map __initdata = {
.virtual = BCM2835_PERIPH_VIRT,
.pfn = __phys_to_pfn(BCM2835_PERIPH_PHYS),
@ -84,6 +109,9 @@ static void __init bcm2835_init(void)
int ret;
bcm2835_setup_restart();
if (wdt_regs)
pm_power_off = bcm2835_power_off;
bcm2835_init_clocks();
ret = of_platform_populate(NULL, of_default_bus_match_table, NULL,

9
arch/arm/mach-davinci/board-da830-evm.c
View File

@ -652,8 +652,13 @@ static __init void da830_evm_init(void)
if (ret)
pr_warning("da830_evm_init: rtc setup failed: %d\n", ret);
ret = da8xx_register_spi(0, da830evm_spi_info,
ARRAY_SIZE(da830evm_spi_info));
ret = spi_register_board_info(da830evm_spi_info,
ARRAY_SIZE(da830evm_spi_info));
if (ret)
pr_warn("%s: spi info registration failed: %d\n", __func__,
ret);
ret = da8xx_register_spi_bus(0, ARRAY_SIZE(da830evm_spi_info));
if (ret)
pr_warning("da830_evm_init: spi 0 registration failed: %d\n",
ret);

9
arch/arm/mach-davinci/board-da850-evm.c
View File

@ -1565,8 +1565,13 @@ static __init void da850_evm_init(void)
da850_vpif_init();
ret = da8xx_register_spi(1, da850evm_spi_info,
ARRAY_SIZE(da850evm_spi_info));
ret = spi_register_board_info(da850evm_spi_info,
ARRAY_SIZE(da850evm_spi_info));
if (ret)
pr_warn("%s: spi info registration failed: %d\n", __func__,
ret);
ret = da8xx_register_spi_bus(1, ARRAY_SIZE(da850evm_spi_info));
if (ret)
pr_warning("da850_evm_init: spi 1 registration failed: %d\n",
ret);

9
arch/arm/mach-davinci/board-mityomapl138.c
View File

@ -529,8 +529,13 @@ static void __init mityomapl138_init(void)
mityomapl138_setup_nand();
ret = da8xx_register_spi(1, mityomapl138_spi_flash_info,
ARRAY_SIZE(mityomapl138_spi_flash_info));
ret = spi_register_board_info(mityomapl138_spi_flash_info,
ARRAY_SIZE(mityomapl138_spi_flash_info));
if (ret)
pr_warn("spi info registration failed: %d\n", ret);
ret = da8xx_register_spi_bus(1,
ARRAY_SIZE(mityomapl138_spi_flash_info));
if (ret)
pr_warning("spi 1 registration failed: %d\n", ret);

39
arch/arm/mach-davinci/clock.c
View File

@ -52,6 +52,40 @@ static void __clk_disable(struct clk *clk)
__clk_disable(clk->parent);
}
int davinci_clk_reset(struct clk *clk, bool reset)
{
unsigned long flags;
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
spin_lock_irqsave(&clockfw_lock, flags);
if (clk->flags & CLK_PSC)
davinci_psc_reset(clk->gpsc, clk->lpsc, reset);
spin_unlock_irqrestore(&clockfw_lock, flags);
return 0;
}
EXPORT_SYMBOL(davinci_clk_reset);
int davinci_clk_reset_assert(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk) || !clk->reset)
return -EINVAL;
return clk->reset(clk, true);
}
EXPORT_SYMBOL(davinci_clk_reset_assert);
int davinci_clk_reset_deassert(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk) || !clk->reset)
return -EINVAL;
return clk->reset(clk, false);
}
EXPORT_SYMBOL(davinci_clk_reset_deassert);
int clk_enable(struct clk *clk)
{
unsigned long flags;
@ -535,7 +569,7 @@ int davinci_set_refclk_rate(unsigned long rate)
}
int __init davinci_clk_init(struct clk_lookup *clocks)
{
{
struct clk_lookup *c;
struct clk *clk;
size_t num_clocks = 0;
@ -576,6 +610,9 @@ int __init davinci_clk_init(struct clk_lookup *clocks)
if (clk->lpsc)
clk->flags |= CLK_PSC;
if (clk->flags & PSC_LRST)
clk->reset = davinci_clk_reset;
clk_register(clk);
num_clocks++;

3
arch/arm/mach-davinci/clock.h
View File

@ -103,6 +103,7 @@ struct clk {
unsigned long (*recalc) (struct clk *);
int (*set_rate) (struct clk *clk, unsigned long rate);
int (*round_rate) (struct clk *clk, unsigned long rate);
int (*reset) (struct clk *clk, bool reset);
};
/* Clock flags: SoC-specific flags start at BIT(16) */
@ -112,6 +113,7 @@ struct clk {
#define PRE_PLL BIT(4) /* source is before PLL mult/div */
#define PSC_SWRSTDISABLE BIT(5) /* Disable state is SwRstDisable */
#define PSC_FORCE BIT(6) /* Force module state transtition */
#define PSC_LRST BIT(8) /* Use local reset on enable/disable */
#define CLK(dev, con, ck) \
{ \
@ -126,6 +128,7 @@ int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate);
int davinci_set_refclk_rate(unsigned long rate);
int davinci_simple_set_rate(struct clk *clk, unsigned long rate);
int davinci_clk_reset(struct clk *clk, bool reset);
extern struct platform_device davinci_wdt_device;
extern void davinci_watchdog_reset(struct platform_device *);

17
arch/arm/mach-davinci/da850.c
View File

@ -76,6 +76,13 @@ static struct clk pll0_aux_clk = {
.flags = CLK_PLL | PRE_PLL,
};
static struct clk pll0_sysclk1 = {
.name = "pll0_sysclk1",
.parent = &pll0_clk,
.flags = CLK_PLL,
.div_reg = PLLDIV1,
};
static struct clk pll0_sysclk2 = {
.name = "pll0_sysclk2",
.parent = &pll0_clk,
@ -368,10 +375,19 @@ static struct clk sata_clk = {
.flags = PSC_FORCE,
};
static struct clk dsp_clk = {
.name = "dsp",
.parent = &pll0_sysclk1,
.domain = DAVINCI_GPSC_DSPDOMAIN,
.lpsc = DA8XX_LPSC0_GEM,
.flags = PSC_LRST | PSC_FORCE,
};
static struct clk_lookup da850_clks[] = {
CLK(NULL, "ref", &ref_clk),
CLK(NULL, "pll0", &pll0_clk),
CLK(NULL, "pll0_aux", &pll0_aux_clk),
CLK(NULL, "pll0_sysclk1", &pll0_sysclk1),
CLK(NULL, "pll0_sysclk2", &pll0_sysclk2),
CLK(NULL, "pll0_sysclk3", &pll0_sysclk3),
CLK(NULL, "pll0_sysclk4", &pll0_sysclk4),
@ -413,6 +429,7 @@ static struct clk_lookup da850_clks[] = {
CLK("spi_davinci.1", NULL, &spi1_clk),
CLK("vpif", NULL, &vpif_clk),
CLK("ahci", NULL, &sata_clk),
CLK("davinci-rproc.0", NULL, &dsp_clk),
CLK(NULL, NULL, NULL),
};

16
arch/arm/mach-davinci/devices-da8xx.c
View File

@ -751,7 +751,7 @@ void __iomem * __init da8xx_get_mem_ctlr(void)
da8xx_ddr2_ctlr_base = ioremap(DA8XX_DDR2_CTL_BASE, SZ_32K);
if (!da8xx_ddr2_ctlr_base)
pr_warning("%s: Unable to map DDR2 controller", __func__);
pr_warn("%s: Unable to map DDR2 controller", __func__);
return da8xx_ddr2_ctlr_base;
}
@ -832,7 +832,7 @@ static struct resource da8xx_spi1_resources[] = {
},
};
struct davinci_spi_platform_data da8xx_spi_pdata[] = {
static struct davinci_spi_platform_data da8xx_spi_pdata[] = {
[0] = {
.version = SPI_VERSION_2,
.intr_line = 1,
@ -866,20 +866,12 @@ static struct platform_device da8xx_spi_device[] = {
},
};
int __init da8xx_register_spi(int instance, const struct spi_board_info *info,
unsigned len)
int __init da8xx_register_spi_bus(int instance, unsigned num_chipselect)
{
int ret;
if (instance < 0 || instance > 1)
return -EINVAL;
ret = spi_register_board_info(info, len);
if (ret)
pr_warning("%s: failed to register board info for spi %d :"
" %d\n", __func__, instance, ret);
da8xx_spi_pdata[instance].num_chipselect = len;
da8xx_spi_pdata[instance].num_chipselect = num_chipselect;
if (instance == 1 && cpu_is_davinci_da850()) {
da8xx_spi1_resources[0].start = DA850_SPI1_BASE;

3
arch/arm/mach-davinci/include/mach/clock.h
View File

@ -18,4 +18,7 @@ struct clk;
extern int clk_register(struct clk *clk);
extern void clk_unregister(struct clk *clk);
int davinci_clk_reset_assert(struct clk *c);
int davinci_clk_reset_deassert(struct clk *c);
#endif

4
arch/arm/mach-davinci/include/mach/da8xx.h
View File

@ -82,8 +82,7 @@ void __init da850_init(void);
int da830_register_edma(struct edma_rsv_info *rsv);
int da850_register_edma(struct edma_rsv_info *rsv[2]);
int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
int da8xx_register_spi(int instance,
const struct spi_board_info *info, unsigned len);
int da8xx_register_spi_bus(int instance, unsigned num_chipselect);
int da8xx_register_watchdog(void);
int da8xx_register_usb20(unsigned mA, unsigned potpgt);
int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
@ -110,7 +109,6 @@ extern struct platform_device da8xx_serial_device;
extern struct emac_platform_data da8xx_emac_pdata;
extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata;
extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata;
extern struct davinci_spi_platform_data da8xx_spi_pdata[];
extern struct platform_device da8xx_wdt_device;

3
arch/arm/mach-davinci/include/mach/psc.h
View File

@ -246,6 +246,7 @@
#define MDSTAT_STATE_MASK 0x3f
#define PDSTAT_STATE_MASK 0x1f
#define MDCTL_LRST BIT(8)
#define MDCTL_FORCE BIT(31)
#define PDCTL_NEXT BIT(0)
#define PDCTL_EPCGOOD BIT(8)
@ -253,6 +254,8 @@
#ifndef __ASSEMBLER__
extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
extern void davinci_psc_reset(unsigned int ctlr, unsigned int id,
bool reset);
extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
unsigned int id, bool enable, u32 flags);

29
arch/arm/mach-davinci/psc.c
View File

@ -35,7 +35,7 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
struct davinci_soc_info *soc_info = &davinci_soc_info;
if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
pr_warn("PSC: Bad psc data: 0x%x[%d]\n",
(int)soc_info->psc_bases, ctlr);
return 0;
}
@ -48,6 +48,31 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
return mdstat & BIT(12);
}
/* Control "reset" line associated with PSC domain */
void davinci_psc_reset(unsigned int ctlr, unsigned int id, bool reset)
{
u32 mdctl;
void __iomem *psc_base;
struct davinci_soc_info *soc_info = &davinci_soc_info;
if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
pr_warn("PSC: Bad psc data: 0x%x[%d]\n",
(int)soc_info->psc_bases, ctlr);
return;
}
psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K);
mdctl = readl(psc_base + MDCTL + 4 * id);
if (reset)
mdctl &= ~MDCTL_LRST;
else
mdctl |= MDCTL_LRST;
writel(mdctl, psc_base + MDCTL + 4 * id);
iounmap(psc_base);
}
/* Enable or disable a PSC domain */
void davinci_psc_config(unsigned int domain, unsigned int ctlr,
unsigned int id, bool enable, u32 flags)
@ -58,7 +83,7 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr,
u32 next_state = PSC_STATE_ENABLE;
if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
pr_warn("PSC: Bad psc data: 0x%x[%d]\n",
(int)soc_info->psc_bases, ctlr);
return;
}

6
arch/arm/mach-imx/Makefile
View File

@ -28,7 +28,11 @@ obj-$(CONFIG_MXC_ULPI) += ulpi.o
obj-$(CONFIG_MXC_USE_EPIT) += epit.o
obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
ifeq ($(CONFIG_CPU_IDLE),y)
obj-y += cpuidle.o
obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
endif
ifdef CONFIG_SND_IMX_SOC
obj-y += ssi-fiq.o

7
arch/arm/mach-imx/clk-imx27.c
View File

@ -62,7 +62,7 @@ static const char *clko_sel_clks[] = {
"32k", "usb_div", "dptc",
};
static const char *ssi_sel_clks[] = { "spll", "mpll", };
static const char *ssi_sel_clks[] = { "spll_gate", "mpll", };
enum mx27_clks {
dummy, ckih, ckil, mpll, spll, mpll_main2, ahb, ipg, nfc_div, per1_div,
@ -82,7 +82,7 @@ enum mx27_clks {
csi_ahb_gate, brom_ahb_gate, ata_ahb_gate, wdog_ipg_gate, usb_ipg_gate,
uart6_ipg_gate, uart5_ipg_gate, uart4_ipg_gate, uart3_ipg_gate,
uart2_ipg_gate, uart1_ipg_gate, ckih_div1p5, fpm, mpll_osc_sel,
mpll_sel, clk_max
mpll_sel, spll_gate, clk_max
};
static struct clk *clk[clk_max];
@ -104,6 +104,7 @@ int __init mx27_clocks_init(unsigned long fref)
ARRAY_SIZE(mpll_sel_clks));
clk[mpll] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
clk[spll] = imx_clk_pllv1("spll", "ckih", CCM_SPCTL0);
clk[spll_gate] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
clk[mpll_main2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3);
if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
@ -121,7 +122,7 @@ int __init mx27_clocks_init(unsigned long fref)
clk[per4_div] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6);
clk[vpu_sel] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks));
clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6);
clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 28, 3);
clk[usb_div] = imx_clk_divider("usb_div", "spll_gate", CCM_CSCR, 28, 3);
clk[cpu_sel] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
clk[clko_sel] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
if (mx27_revision() >= IMX_CHIP_REVISION_2_0)

15
arch/arm/mach-imx/clk-imx31.c
View File

@ -34,8 +34,8 @@ static const char *csi_sel[] = { "upll", "spll", };
static const char *fir_sel[] = { "mcu_main", "upll", "spll" };
enum mx31_clks {
ckih, ckil, mpll, spll, upll, mcu_main, hsp, ahb, nfc, ipg, per_div,
per, csi, fir, csi_div, usb_div_pre, usb_div_post, fir_div_pre,
dummy, ckih, ckil, mpll, spll, upll, mcu_main, hsp, ahb, nfc, ipg,
per_div, per, csi, fir, csi_div, usb_div_pre, usb_div_post, fir_div_pre,
fir_div_post, sdhc1_gate, sdhc2_gate, gpt_gate, epit1_gate, epit2_gate,
iim_gate, ata_gate, sdma_gate, cspi3_gate, rng_gate, uart1_gate,
uart2_gate, ssi1_gate, i2c1_gate, i2c2_gate, i2c3_gate, hantro_gate,
@ -46,12 +46,15 @@ enum mx31_clks {
};
static struct clk *clk[clk_max];
static struct clk_onecell_data clk_data;
int __init mx31_clocks_init(unsigned long fref)
{
void __iomem *base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
int i;
struct device_node *np;
clk[dummy] = imx_clk_fixed("dummy", 0);
clk[ckih] = imx_clk_fixed("ckih", fref);
clk[ckil] = imx_clk_fixed("ckil", 32768);
clk[mpll] = imx_clk_pllv1("mpll", "ckih", base + MXC_CCM_MPCTL);
@ -116,6 +119,14 @@ int __init mx31_clocks_init(unsigned long fref)
pr_err("imx31 clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
np = of_find_compatible_node(NULL, NULL, "fsl,imx31-ccm");
if (np) {
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
}
clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[cspi1_gate], NULL, "imx31-cspi.0");

4
arch/arm/mach-imx/clk-imx35.c
View File

@ -67,13 +67,13 @@ enum mx35_clks {
static struct clk *clk[clk_max];
int __init mx35_clocks_init()
int __init mx35_clocks_init(void)
{
void __iomem *base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR);
u32 pdr0, consumer_sel, hsp_sel;
struct arm_ahb_div *aad;
unsigned char *hsp_div;
int i;
u32 i;
pdr0 = __raw_readl(base + MXC_CCM_PDR0);
consumer_sel = (pdr0 >> 16) & 0xf;

12
arch/arm/mach-imx/clk-imx6q.c
View File

@ -54,8 +54,19 @@
#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26)
#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27)
#define CGPR 0x64
#define BM_CGPR_CHICKEN_BIT (0x1 << 17)
static void __iomem *ccm_base;
void imx6q_set_chicken_bit(void)
{
u32 val = readl_relaxed(ccm_base + CGPR);
val |= BM_CGPR_CHICKEN_BIT;
writel_relaxed(val, ccm_base + CGPR);
}
int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
{
u32 val = readl_relaxed(ccm_base + CLPCR);
@ -66,6 +77,7 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
break;
case WAIT_UNCLOCKED:
val |= 0x1 << BP_CLPCR_LPM;
val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM;
break;
case STOP_POWER_ON:
val |= 0x2 << BP_CLPCR_LPM;

3
arch/arm/mach-imx/common.h
View File

@ -116,9 +116,11 @@ extern u32 *pl310_get_save_ptr(void);
extern void v7_secondary_startup(void);
extern void imx_scu_map_io(void);
extern void imx_smp_prepare(void);
extern void imx_scu_standby_enable(void);
#else
static inline void imx_scu_map_io(void) {}
static inline void imx_smp_prepare(void) {}
static inline void imx_scu_standby_enable(void) {}
#endif
extern void imx_enable_cpu(int cpu, bool enable);
extern void imx_set_cpu_jump(int cpu, void *jump_addr);
@ -128,6 +130,7 @@ extern void imx_gpc_init(void);
extern void imx_gpc_pre_suspend(void);
extern void imx_gpc_post_resume(void);
extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
extern void imx6q_set_chicken_bit(void);
extern void imx_cpu_die(unsigned int cpu);
extern int imx_cpu_kill(unsigned int cpu);

95
arch/arm/mach-imx/cpuidle-imx6q.c Normal file
View File

@ -0,0 +1,95 @@
/*
* Copyright (C) 2012 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clockchips.h>
#include <linux/cpuidle.h>
#include <linux/module.h>
#include <asm/cpuidle.h>
#include <asm/proc-fns.h>
#include "common.h"
#include "cpuidle.h"
static atomic_t master = ATOMIC_INIT(0);
static DEFINE_SPINLOCK(master_lock);
static int imx6q_enter_wait(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index)
{
int cpu = dev->cpu;
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
if (atomic_inc_return(&master) == num_online_cpus()) {
/*
* With this lock, we prevent other cpu to exit and enter
* this function again and become the master.
*/
if (!spin_trylock(&master_lock))
goto idle;
imx6q_set_lpm(WAIT_UNCLOCKED);
cpu_do_idle();
imx6q_set_lpm(WAIT_CLOCKED);
spin_unlock(&master_lock);
goto done;
}
idle:
cpu_do_idle();
done:
atomic_dec(&master);
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
return index;
}
/*
* For each cpu, setup the broadcast timer because local timer
* stops for the states other than WFI.
*/
static void imx6q_setup_broadcast_timer(void *arg)
{
int cpu = smp_processor_id();
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu);
}
static struct cpuidle_driver imx6q_cpuidle_driver = {
.name = "imx6q_cpuidle",
.owner = THIS_MODULE,
.en_core_tk_irqen = 1,
.states = {
/* WFI */
ARM_CPUIDLE_WFI_STATE,
/* WAIT */
{
.exit_latency = 50,
.target_residency = 75,
.flags = CPUIDLE_FLAG_TIME_VALID,
.enter = imx6q_enter_wait,
.name = "WAIT",
.desc = "Clock off",
},
},
.state_count = 2,
.safe_state_index = 0,
};
int __init imx6q_cpuidle_init(void)
{
/* Need to enable SCU standby for entering WAIT modes */
imx_scu_standby_enable();
/* Set chicken bit to get a reliable WAIT mode support */
imx6q_set_chicken_bit();
/* Configure the broadcast timer on each cpu */
on_each_cpu(imx6q_setup_broadcast_timer, NULL, 1);
return imx_cpuidle_init(&imx6q_cpuidle_driver);
}

5
arch/arm/mach-imx/cpuidle.h
View File

@ -14,9 +14,14 @@
#ifdef CONFIG_CPU_IDLE
extern int imx_cpuidle_init(struct cpuidle_driver *drv);
extern int imx6q_cpuidle_init(void);
#else
static inline int imx_cpuidle_init(struct cpuidle_driver *drv)
{
return -ENODEV;
}
static inline int imx6q_cpuidle_init(void)
{
return -ENODEV;
}
#endif

5
arch/arm/mach-imx/gpc.c
View File

@ -101,11 +101,16 @@ static void imx_gpc_irq_mask(struct irq_data *d)
void __init imx_gpc_init(void)
{
struct device_node *np;
int i;
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc");
gpc_base = of_iomap(np, 0);
WARN_ON(!gpc_base);
/* Initially mask all interrupts */
for (i = 0; i < IMR_NUM; i++)
writel_relaxed(~0, gpc_base + GPC_IMR1 + i * 4);
/* Register GPC as the secondary interrupt controller behind GIC */
gic_arch_extn.irq_mask = imx_gpc_irq_mask;
gic_arch_extn.irq_unmask = imx_gpc_irq_unmask;

47
arch/arm/mach-imx/headsmp.S
View File

@ -17,53 +17,6 @@
.section ".text.head", "ax"
/*
* The secondary kernel init calls v7_flush_dcache_all before it enables
* the L1; however, the L1 comes out of reset in an undefined state, so
* the clean + invalidate performed by v7_flush_dcache_all causes a bunch
* of cache lines with uninitialized data and uninitialized tags to get
* written out to memory, which does really unpleasant things to the main
* processor. We fix this by performing an invalidate, rather than a
* clean + invalidate, before jumping into the kernel.
*
* This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs
* to be called for both secondary cores startup and primary core resume
* procedures. Ideally, it should be moved into arch/arm/mm/cache-v7.S.
*/
ENTRY(v7_invalidate_l1)
mov r0, #0
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
mcr p15, 2, r0, c0, c0, 0
mrc p15, 1, r0, c0, c0, 0
ldr r1, =0x7fff
and r2, r1, r0, lsr #13
ldr r1, =0x3ff
and r3, r1, r0, lsr #3 @ NumWays - 1
add r2, r2, #1 @ NumSets
and r0, r0, #0x7
add r0, r0, #4 @ SetShift
clz r1, r3 @ WayShift
add r4, r3, #1 @ NumWays
1: sub r2, r2, #1 @ NumSets--
mov r3, r4 @ Temp = NumWays
2: subs r3, r3, #1 @ Temp--
mov r5, r3, lsl r1
mov r6, r2, lsl r0
orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
mcr p15, 0, r5, c7, c6, 2
bgt 2b
cmp r2, #0
bgt 1b
dsb
isb
mov pc, lr
ENDPROC(v7_invalidate_l1)
#ifdef CONFIG_SMP
ENTRY(v7_secondary_startup)
bl v7_invalidate_l1

17
arch/arm/mach-imx/imx31-dt.c
View File

@ -18,24 +18,9 @@
#include "common.h"
#include "mx31.h"
static const struct of_dev_auxdata imx31_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART1_BASE_ADDR,
"imx21-uart.0", NULL),
OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART2_BASE_ADDR,
"imx21-uart.1", NULL),
OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART3_BASE_ADDR,
"imx21-uart.2", NULL),
OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART4_BASE_ADDR,
"imx21-uart.3", NULL),
OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART5_BASE_ADDR,
"imx21-uart.4", NULL),
{ /* sentinel */ }
};
static void __init imx31_dt_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table,
imx31_auxdata_lookup, NULL);
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *imx31_dt_board_compat[] __initdata = {

17
arch/arm/mach-imx/mach-imx6q.c
View File

@ -12,7 +12,6 @@
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/cpuidle.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/init.h>
@ -27,7 +26,6 @@
#include <linux/regmap.h>
#include <linux/micrel_phy.h>
#include <linux/mfd/syscon.h>
#include <asm/cpuidle.h>
#include <asm/smp_twd.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
@ -202,17 +200,14 @@ static void __init imx6q_init_machine(void)
imx6q_1588_init();
}
static struct cpuidle_driver imx6q_cpuidle_driver = {
.name = "imx6q_cpuidle",
.owner = THIS_MODULE,
.en_core_tk_irqen = 1,
.states[0] = ARM_CPUIDLE_WFI_STATE,
.state_count = 1,
};
static void __init imx6q_init_late(void)
{
imx_cpuidle_init(&imx6q_cpuidle_driver);
/*
* WAIT mode is broken on TO 1.0 and 1.1, so there is no point
* to run cpuidle on them.
*/
if (imx6q_revision() > IMX_CHIP_REVISION_1_1)
imx6q_cpuidle_init();
}
static void __init imx6q_map_io(void)

10
arch/arm/mach-imx/platsmp.c
View File

@ -20,6 +20,8 @@
#include "common.h"
#include "hardware.h"
#define SCU_STANDBY_ENABLE (1 << 5)
static void __iomem *scu_base;
static struct map_desc scu_io_desc __initdata = {
@ -42,6 +44,14 @@ void __init imx_scu_map_io(void)
scu_base = IMX_IO_ADDRESS(base);
}
void imx_scu_standby_enable(void)
{
u32 val = readl_relaxed(scu_base);
val |= SCU_STANDBY_ENABLE;
writel_relaxed(val, scu_base);
}
static void __cpuinit imx_secondary_init(unsigned int cpu)
{
/*

3
arch/arm/mach-imx/time.c
View File

@ -152,7 +152,8 @@ static int v2_set_next_event(unsigned long evt,
__raw_writel(tcmp, timer_base + V2_TCMP);
return (int)(tcmp - __raw_readl(timer_base + V2_TCN)) < 0 ?
return evt < 0x7fffffff &&
(int)(tcmp - __raw_readl(timer_base + V2_TCN)) < 0 ?
-ETIME : 0;
}

1
arch/arm/mach-kirkwood/Makefile
View File

@ -19,7 +19,6 @@ obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_T5325) += t5325-setup.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o
obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o

2
arch/arm/mach-kirkwood/board-dt.c
View File

@ -98,6 +98,8 @@ static void __init kirkwood_dt_init(void)
/* Setup root of clk tree */
kirkwood_of_clk_init();
kirkwood_cpuidle_init();
#ifdef CONFIG_KEXEC
kexec_reinit = kirkwood_enable_pcie;
#endif

23
arch/arm/mach-kirkwood/common.c
View File

@ -499,6 +499,28 @@ void __init kirkwood_wdt_init(void)
orion_wdt_init();
}
/*****************************************************************************
* CPU idle
****************************************************************************/
static struct resource kirkwood_cpuidle_resource[] = {
{
.flags = IORESOURCE_MEM,
.start = DDR_OPERATION_BASE,
.end = DDR_OPERATION_BASE + 3,
},
};
static struct platform_device kirkwood_cpuidle = {
.name = "kirkwood_cpuidle",
.id = -1,
.resource = kirkwood_cpuidle_resource,
.num_resources = 1,
};
void __init kirkwood_cpuidle_init(void)
{
platform_device_register(&kirkwood_cpuidle);
}
/*****************************************************************************
* Time handling
@ -667,6 +689,7 @@ void __init kirkwood_init(void)
kirkwood_xor1_init();
kirkwood_crypto_init();
kirkwood_cpuidle_init();
#ifdef CONFIG_KEXEC
kexec_reinit = kirkwood_enable_pcie;
#endif

1
arch/arm/mach-kirkwood/common.h
View File

@ -50,6 +50,7 @@ void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
int (*dev_ready)(struct mtd_info *));
void kirkwood_audio_init(void);
void kirkwood_cpuidle_init(void);
void kirkwood_restart(char, const char *);
void kirkwood_clk_init(void);

3
arch/arm/mach-kirkwood/include/mach/kirkwood.h
View File

@ -60,8 +60,9 @@
* Register Map
*/
#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000)
#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE + 0x1500)
#define DDR_OPERATION_BASE (DDR_VIRT_BASE + 0x1418)
#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418)
#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000)
#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000)

10
arch/arm/mach-kirkwood/pcie.c
View File

@ -247,13 +247,9 @@ static struct hw_pci kirkwood_pci __initdata = {
static void __init add_pcie_port(int index, void __iomem *base)
{
pr_info("Kirkwood PCIe port %d: ", index);
if (orion_pcie_link_up(base)) {
pr_info("link up\n");
pcie_port_map[num_pcie_ports++] = index;
} else
pr_info("link down, ignoring\n");
pcie_port_map[num_pcie_ports++] = index;
pr_info("Kirkwood PCIe port %d: link %s\n", index,
orion_pcie_link_up(base) ? "up" : "down");
}
void __init kirkwood_pcie_init(unsigned int portmask)

12
arch/arm/mach-mxs/timer.c
View File

@ -72,8 +72,9 @@
#define BM_TIMROT_TIMCTRLn_IRQ_EN (1 << 14)
#define BM_TIMROT_TIMCTRLn_IRQ (1 << 15)
#define BP_TIMROT_TIMCTRLn_SELECT 0
#define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL 0x8
#define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL 0xb
#define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL 0x8
#define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL 0xb
#define BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS 0xf
static struct clock_event_device mxs_clockevent_device;
static enum clock_event_mode mxs_clockevent_mode = CLOCK_EVT_MODE_UNUSED;
@ -206,7 +207,8 @@ static int __init mxs_clockevent_init(struct clk *timer_clk)
mxs_clockevent_device.set_next_event = timrotv1_set_next_event;
mxs_clockevent_device.cpumask = cpumask_of(0);
clockevents_config_and_register(&mxs_clockevent_device,
clk_get_rate(timer_clk), 0xf,
clk_get_rate(timer_clk),
timrot_is_v1() ? 0xf : 0x2,
timrot_is_v1() ? 0xfffe : 0xfffffffe);
return 0;
@ -274,7 +276,7 @@ void __init mxs_timer_init(void)
/* one for clock_event */
__raw_writel((timrot_is_v1() ?
BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL) |
BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) |
BM_TIMROT_TIMCTRLn_UPDATE |
BM_TIMROT_TIMCTRLn_IRQ_EN,
mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
@ -282,7 +284,7 @@ void __init mxs_timer_init(void)
/* another for clocksource */
__raw_writel((timrot_is_v1() ?
BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL) |
BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) |
BM_TIMROT_TIMCTRLn_RELOAD,
mxs_timrot_base + HW_TIMROT_TIMCTRLn(1));

2
arch/arm/mach-omap2/am35xx-emac.c
View File

@ -63,7 +63,7 @@ static int __init omap_davinci_emac_dev_init(struct omap_hwmod *oh,
struct platform_device *pdev;
pdev = omap_device_build(oh->class->name, 0, oh, pdata, pdata_len,
NULL, 0, false);
false);
if (IS_ERR(pdev)) {
WARN(1, "Can't build omap_device for %s:%s.\n",
oh->class->name, oh->name);

2
arch/arm/mach-omap2/board-3430sdp.c
View File

@ -425,7 +425,7 @@ static void enable_board_wakeup_source(void)
OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,

2
arch/arm/mach-omap2/board-3630sdp.c
View File

@ -53,7 +53,7 @@ static void enable_board_wakeup_source(void)
OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,

2
arch/arm/mach-omap2/board-am3517crane.c
View File

@ -40,7 +40,7 @@ static struct omap_board_mux board_mux[] __initdata = {
};
#endif
static struct usbhs_omap_board_data usbhs_bdata __initdata = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

2
arch/arm/mach-omap2/board-am3517evm.c
View File

@ -274,7 +274,7 @@ static __init void am3517_evm_mcbsp1_init(void)
omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0);
}
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)

2
arch/arm/mach-omap2/board-cm-t35.c
View File

@ -419,7 +419,7 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
static struct usbhs_omap_board_data usbhs_bdata __initdata = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

2
arch/arm/mach-omap2/board-cm-t3517.c
View File

@ -166,7 +166,7 @@ static inline void cm_t3517_init_rtc(void) {}
#define HSUSB2_RESET_GPIO (147)
#define USB_HUB_RESET_GPIO (152)
static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = {
static struct usbhs_omap_platform_data cm_t3517_ehci_pdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

2
arch/arm/mach-omap2/board-devkit8000.c
View File

@ -436,7 +436,7 @@ static struct platform_device *devkit8000_devices[] __initdata = {
&omap_dm9000_dev,
};
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,

4
arch/arm/mach-omap2/board-igep0020.c
View File

@ -527,7 +527,7 @@ static void __init igep_i2c_init(void)
omap3_pmic_init("twl4030", &igep_twldata);
}
static const struct usbhs_omap_board_data igep2_usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
@ -538,7 +538,7 @@ static const struct usbhs_omap_board_data igep2_usbhs_bdata __initconst = {
.reset_gpio_port[2] = -EINVAL,
};
static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

2
arch/arm/mach-omap2/board-omap3beagle.c
View File

@ -431,7 +431,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = {
&madc_hwmon,
};
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,

2
arch/arm/mach-omap2/board-omap3evm.c
View File

@ -539,7 +539,7 @@ static int __init omap3_evm_i2c_init(void)
return 0;
}
static struct usbhs_omap_board_data usbhs_bdata __initdata = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,

2
arch/arm/mach-omap2/board-omap3pandora.c
View File

@ -568,7 +568,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
&pandora_backlight,
};
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,

2
arch/arm/mach-omap2/board-omap3stalker.c
View File

@ -362,7 +362,7 @@ static struct platform_device *omap3_stalker_devices[] __initdata = {
&keys_gpio,
};
static struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

2
arch/arm/mach-omap2/board-omap3touchbook.c
View File

@ -310,7 +310,7 @@ static struct platform_device *omap3_touchbook_devices[] __initdata = {
&keys_gpio,
};
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,

2
arch/arm/mach-omap2/board-omap4panda.c
View File

@ -140,7 +140,7 @@ static struct platform_device *panda_devices[] __initdata = {
&btwilink_device,
};
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

2
arch/arm/mach-omap2/board-overo.c
View File

@ -458,7 +458,7 @@ static int __init overo_spi_init(void)
return 0;
}
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

2
arch/arm/mach-omap2/board-zoom.c
View File

@ -92,7 +92,7 @@ static struct mtd_partition zoom_nand_partitions[] = {
},
};
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

16
arch/arm/mach-omap2/cclock2420_data.c
View File

@ -622,15 +622,10 @@ static struct clk_hw_omap gpios_fck_hw = {
DEFINE_STRUCT_CLK(gpios_fck, gpios_fck_parent_names, aes_ick_ops);
static struct clk wu_l4_ick;
DEFINE_STRUCT_CLK_HW_OMAP(wu_l4_ick, "wkup_clkdm");
DEFINE_STRUCT_CLK(wu_l4_ick, dpll_ck_parent_names, core_ck_ops);
static struct clk gpios_ick;
static const char *gpios_ick_parent_names[] = {
"wu_l4_ick",
"sys_ck",
};
static struct clk_hw_omap gpios_ick_hw = {
@ -1682,13 +1677,6 @@ static struct clk_hw_omap wdt1_ick_hw = {
DEFINE_STRUCT_CLK(wdt1_ick, gpios_ick_parent_names, aes_ick_ops);
static struct clk wdt1_osc_ck;
static const struct clk_ops wdt1_osc_ck_ops = {};
DEFINE_STRUCT_CLK_HW_OMAP(wdt1_osc_ck, NULL);
DEFINE_STRUCT_CLK(wdt1_osc_ck, sys_ck_parent_names, wdt1_osc_ck_ops);
static struct clk wdt3_fck;
static struct clk_hw_omap wdt3_fck_hw = {
@ -1767,7 +1755,6 @@ static struct omap_clk omap2420_clks[] = {
CLK(NULL, "func_96m_ck", &func_96m_ck, CK_242X),
CLK(NULL, "func_48m_ck", &func_48m_ck, CK_242X),
CLK(NULL, "func_12m_ck", &func_12m_ck, CK_242X),
CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_242X),
CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_242X),
CLK(NULL, "sys_clkout", &sys_clkout, CK_242X),
CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X),
@ -1797,7 +1784,6 @@ static struct omap_clk omap2420_clks[] = {
/* L4 domain clocks */
CLK(NULL, "l4_ck", &l4_ck, CK_242X),
CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_242X),
CLK(NULL, "wu_l4_ick", &wu_l4_ick, CK_242X),
/* virtual meta-group clock */
CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_242X),
/* general l4 interface ck, multi-parent functional clk */

16
arch/arm/mach-omap2/cclock2430_data.c
View File

@ -601,15 +601,10 @@ static struct clk_hw_omap gpios_fck_hw = {
DEFINE_STRUCT_CLK(gpios_fck, gpio5_fck_parent_names, aes_ick_ops);
static struct clk wu_l4_ick;
DEFINE_STRUCT_CLK_HW_OMAP(wu_l4_ick, "wkup_clkdm");
DEFINE_STRUCT_CLK(wu_l4_ick, dpll_ck_parent_names, core_ck_ops);
static struct clk gpios_ick;
static const char *gpios_ick_parent_names[] = {
"wu_l4_ick",
"sys_ck",
};
static struct clk_hw_omap gpios_ick_hw = {
@ -1811,13 +1806,6 @@ static struct clk_hw_omap wdt1_ick_hw = {
DEFINE_STRUCT_CLK(wdt1_ick, gpios_ick_parent_names, aes_ick_ops);
static struct clk wdt1_osc_ck;
static const struct clk_ops wdt1_osc_ck_ops = {};
DEFINE_STRUCT_CLK_HW_OMAP(wdt1_osc_ck, NULL);
DEFINE_STRUCT_CLK(wdt1_osc_ck, sys_ck_parent_names, wdt1_osc_ck_ops);
static struct clk wdt4_fck;
static struct clk_hw_omap wdt4_fck_hw = {
@ -1869,7 +1857,6 @@ static struct omap_clk omap2430_clks[] = {
CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X),
CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X),
CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X),
CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_243X),
CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X),
CLK(NULL, "sys_clkout", &sys_clkout, CK_243X),
CLK(NULL, "emul_ck", &emul_ck, CK_243X),
@ -1898,7 +1885,6 @@ static struct omap_clk omap2430_clks[] = {
/* L4 domain clocks */
CLK(NULL, "l4_ck", &l4_ck, CK_243X),
CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X),
CLK(NULL, "wu_l4_ick", &wu_l4_ick, CK_243X),
/* virtual meta-group clock */
CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X),
/* general l4 interface ck, multi-parent functional clk */

566
arch/arm/mach-omap2/cclock44xx_data.c
View File

@ -16,6 +16,10 @@
* XXX Some of the ES1 clocks have been removed/changed; once support
* is added for discriminating clocks by ES level, these should be added back
* in.
*
* XXX All of the remaining MODULEMODE clock nodes should be removed
* once the drivers are updated to use pm_runtime or to use the appropriate
* upstream clock node for rate/parent selection.
*/
#include <linux/kernel.h>
@ -315,7 +319,7 @@ DEFINE_CLK_DIVIDER(dpll_abe_m2_ck, "dpll_abe_ck", &dpll_abe_ck, 0x0,
OMAP4430_CM_DIV_M2_DPLL_ABE, OMAP4430_DPLL_CLKOUT_DIV_SHIFT,
OMAP4430_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED, NULL);
static const struct clk_ops dmic_fck_ops = {
static const struct clk_ops dpll_hsd_ops = {
.enable = &omap2_dflt_clk_enable,
.disable = &omap2_dflt_clk_disable,
.is_enabled = &omap2_dflt_clk_is_enabled,
@ -325,6 +329,12 @@ static const struct clk_ops dmic_fck_ops = {
.init = &omap2_init_clk_clkdm,
};
static const struct clk_ops func_dmic_abe_gfclk_ops = {
.recalc_rate = &omap2_clksel_recalc,
.get_parent = &omap2_clksel_find_parent_index,
.set_parent = &omap2_clksel_set_parent,
};
static const char *dpll_core_m3x2_ck_parents[] = {
"dpll_core_x2_ck",
};
@ -340,7 +350,7 @@ DEFINE_CLK_OMAP_MUX_GATE(dpll_core_m3x2_ck, NULL, dpll_core_m3x2_div,
OMAP4430_DPLL_CLKOUTHIF_DIV_MASK,
OMAP4430_CM_DIV_M3_DPLL_CORE,
OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT, NULL,
dpll_core_m3x2_ck_parents, dmic_fck_ops);
dpll_core_m3x2_ck_parents, dpll_hsd_ops);
DEFINE_CLK_OMAP_HSDIVIDER(dpll_core_m7x2_ck, "dpll_core_x2_ck",
&dpll_core_x2_ck, 0x0, OMAP4430_CM_DIV_M7_DPLL_CORE,
@ -547,7 +557,7 @@ DEFINE_CLK_OMAP_MUX_GATE(dpll_per_m3x2_ck, NULL, dpll_per_m3x2_div,
OMAP4430_DPLL_CLKOUTHIF_DIV_MASK,
OMAP4430_CM_DIV_M3_DPLL_PER,
OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT, NULL,
dpll_per_m3x2_ck_parents, dmic_fck_ops);
dpll_per_m3x2_ck_parents, dpll_hsd_ops);
DEFINE_CLK_OMAP_HSDIVIDER(dpll_per_m4x2_ck, "dpll_per_x2_ck", &dpll_per_x2_ck,
0x0, OMAP4430_CM_DIV_M4_DPLL_PER,
@ -749,10 +759,6 @@ DEFINE_CLK_GATE(aes2_fck, "l3_div_ck", &l3_div_ck, 0x0,
OMAP4430_CM_L4SEC_AES2_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(aess_fck, "aess_fclk", &aess_fclk, 0x0,
OMAP4430_CM1_ABE_AESS_CLKCTRL, OMAP4430_MODULEMODE_SWCTRL_SHIFT,
0x0, NULL);
DEFINE_CLK_GATE(bandgap_fclk, "sys_32k_ck", &sys_32k_ck, 0x0,
OMAP4430_CM_WKUP_BANDGAP_CLKCTRL,
OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT, 0x0, NULL);
@ -774,11 +780,6 @@ DEFINE_CLK_GATE(bandgap_ts_fclk, "div_ts_ck", &div_ts_ck, 0x0,
OMAP4460_OPTFCLKEN_TS_FCLK_SHIFT,
0x0, NULL);
DEFINE_CLK_GATE(des3des_fck, "l4_div_ck", &l4_div_ck, 0x0,
OMAP4430_CM_L4SEC_DES3DES_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT,
0x0, NULL);
static const char *dmic_sync_mux_ck_parents[] = {
"abe_24m_fclk", "syc_clk_div_ck", "func_24m_clk",
};
@ -795,23 +796,13 @@ static const struct clksel func_dmic_abe_gfclk_sel[] = {
{ .parent = NULL },
};
static const char *dmic_fck_parents[] = {
static const char *func_dmic_abe_gfclk_parents[] = {
"dmic_sync_mux_ck", "pad_clks_ck", "slimbus_clk",
};
/* Merged func_dmic_abe_gfclk into dmic */
static struct clk dmic_fck;
DEFINE_CLK_OMAP_MUX_GATE(dmic_fck, "abe_clkdm", func_dmic_abe_gfclk_sel,
OMAP4430_CM1_ABE_DMIC_CLKCTRL,
OMAP4430_CLKSEL_SOURCE_MASK,
OMAP4430_CM1_ABE_DMIC_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL,
dmic_fck_parents, dmic_fck_ops);
DEFINE_CLK_GATE(dsp_fck, "dpll_iva_m4x2_ck", &dpll_iva_m4x2_ck, 0x0,
OMAP4430_CM_TESLA_TESLA_CLKCTRL,
OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_OMAP_MUX(func_dmic_abe_gfclk, "abe_clkdm", func_dmic_abe_gfclk_sel,
OMAP4430_CM1_ABE_DMIC_CLKCTRL, OMAP4430_CLKSEL_SOURCE_MASK,
func_dmic_abe_gfclk_parents, func_dmic_abe_gfclk_ops);
DEFINE_CLK_GATE(dss_sys_clk, "syc_clk_div_ck", &syc_clk_div_ck, 0x0,
OMAP4430_CM_DSS_DSS_CLKCTRL,
@ -833,177 +824,57 @@ DEFINE_CLK_GATE(dss_fck, "l3_div_ck", &l3_div_ck, 0x0,
OMAP4430_CM_DSS_DSS_CLKCTRL, OMAP4430_MODULEMODE_SWCTRL_SHIFT,
0x0, NULL);
DEFINE_CLK_GATE(efuse_ctrl_cust_fck, "sys_clkin_ck", &sys_clkin_ck, 0x0,
OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(emif1_fck, "ddrphy_ck", &ddrphy_ck, 0x0,
OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL,
OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(emif2_fck, "ddrphy_ck", &ddrphy_ck, 0x0,
OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL,
OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_DIVIDER(fdif_fck, "dpll_per_m4x2_ck", &dpll_per_m4x2_ck, 0x0,
OMAP4430_CM_CAM_FDIF_CLKCTRL, OMAP4430_CLKSEL_FCLK_SHIFT,
OMAP4430_CLKSEL_FCLK_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL);
DEFINE_CLK_GATE(fpka_fck, "l4_div_ck", &l4_div_ck, 0x0,
OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(gpio1_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
OMAP4430_CM_WKUP_GPIO1_CLKCTRL,
OMAP4430_OPTFCLKEN_DBCLK_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(gpio1_ick, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck, 0x0,
OMAP4430_CM_WKUP_GPIO1_CLKCTRL,
OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(gpio2_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
OMAP4430_CM_L4PER_GPIO2_CLKCTRL, OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
0x0, NULL);
DEFINE_CLK_GATE(gpio2_ick, "l4_div_ck", &l4_div_ck, 0x0,
OMAP4430_CM_L4PER_GPIO2_CLKCTRL,
OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(gpio3_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
OMAP4430_CM_L4PER_GPIO3_CLKCTRL,
OMAP4430_OPTFCLKEN_DBCLK_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(gpio3_ick, "l4_div_ck", &l4_div_ck, 0x0,
OMAP4430_CM_L4PER_GPIO3_CLKCTRL,
OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(gpio4_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
OMAP4430_CM_L4PER_GPIO4_CLKCTRL, OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
0x0, NULL);
DEFINE_CLK_GATE(gpio4_ick, "l4_div_ck", &l4_div_ck, 0x0,
OMAP4430_CM_L4PER_GPIO4_CLKCTRL,
OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(gpio5_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
OMAP4430_CM_L4PER_GPIO5_CLKCTRL, OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
0x0, NULL);
DEFINE_CLK_GATE(gpio5_ick, "l4_div_ck", &l4_div_ck, 0x0,
OMAP4430_CM_L4PER_GPIO5_CLKCTRL,
OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(gpio6_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0,
OMAP4430_CM_L4PER_GPIO6_CLKCTRL, OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
0x0, NULL);
DEFINE_CLK_GATE(gpio6_ick, "l4_div_ck", &l4_div_ck, 0x0,
OMAP4430_CM_L4PER_GPIO6_CLKCTRL,
OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(gpmc_ick, "l3_div_ck", &l3_div_ck, 0x0,
OMAP4430_CM_L3_2_GPMC_CLKCTRL, OMAP4430_MODULEMODE_HWCTRL_SHIFT,
0x0, NULL);
static const struct clksel sgx_clk_mux_sel[] = {
{ .parent = &dpll_core_m7x2_ck, .rates = div_1_0_rates },
{ .parent = &dpll_per_m7x2_ck, .rates = div_1_1_rates },
{ .parent = NULL },
};
static const char *gpu_fck_parents[] = {
static const char *sgx_clk_mux_parents[] = {
"dpll_core_m7x2_ck", "dpll_per_m7x2_ck",
};
/* Merged sgx_clk_mux into gpu */
DEFINE_CLK_OMAP_MUX_GATE(gpu_fck, "l3_gfx_clkdm", sgx_clk_mux_sel,
OMAP4430_CM_GFX_GFX_CLKCTRL,
OMAP4430_CLKSEL_SGX_FCLK_MASK,
OMAP4430_CM_GFX_GFX_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL,
gpu_fck_parents, dmic_fck_ops);
DEFINE_CLK_GATE(hdq1w_fck, "func_12m_fclk", &func_12m_fclk, 0x0,
OMAP4430_CM_L4PER_HDQ1W_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_OMAP_MUX(sgx_clk_mux, "l3_gfx_clkdm", sgx_clk_mux_sel,
OMAP4430_CM_GFX_GFX_CLKCTRL, OMAP4430_CLKSEL_SGX_FCLK_MASK,
sgx_clk_mux_parents, func_dmic_abe_gfclk_ops);
DEFINE_CLK_DIVIDER(hsi_fck, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck, 0x0,
OMAP4430_CM_L3INIT_HSI_CLKCTRL, OMAP4430_CLKSEL_24_25_SHIFT,
OMAP4430_CLKSEL_24_25_WIDTH, CLK_DIVIDER_POWER_OF_TWO,
NULL);
DEFINE_CLK_GATE(i2c1_fck, "func_96m_fclk", &func_96m_fclk, 0x0,
OMAP4430_CM_L4PER_I2C1_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(i2c2_fck, "func_96m_fclk", &func_96m_fclk, 0x0,
OMAP4430_CM_L4PER_I2C2_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(i2c3_fck, "func_96m_fclk", &func_96m_fclk, 0x0,
OMAP4430_CM_L4PER_I2C3_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(i2c4_fck, "func_96m_fclk", &func_96m_fclk, 0x0,
OMAP4430_CM_L4PER_I2C4_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(ipu_fck, "ducati_clk_mux_ck", &ducati_clk_mux_ck, 0x0,
OMAP4430_CM_DUCATI_DUCATI_CLKCTRL,
OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(iss_ctrlclk, "func_96m_fclk", &func_96m_fclk, 0x0,
OMAP4430_CM_CAM_ISS_CLKCTRL, OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT,
0x0, NULL);
DEFINE_CLK_GATE(iss_fck, "ducati_clk_mux_ck", &ducati_clk_mux_ck, 0x0,
OMAP4430_CM_CAM_ISS_CLKCTRL, OMAP4430_MODULEMODE_SWCTRL_SHIFT,
0x0, NULL);
DEFINE_CLK_GATE(iva_fck, "dpll_iva_m5x2_ck", &dpll_iva_m5x2_ck, 0x0,
OMAP4430_CM_IVAHD_IVAHD_CLKCTRL,
OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(kbd_fck, "sys_32k_ck", &sys_32k_ck, 0x0,
OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
static struct clk l3_instr_ick;
static const char *l3_instr_ick_parent_names[] = {
"l3_div_ck",
};
static const struct clk_ops l3_instr_ick_ops = {
.enable = &omap2_dflt_clk_enable,
.disable = &omap2_dflt_clk_disable,
.is_enabled = &omap2_dflt_clk_is_enabled,
.init = &omap2_init_clk_clkdm,
};
static struct clk_hw_omap l3_instr_ick_hw = {
.hw = {
.clk = &l3_instr_ick,
},
.enable_reg = OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL_SHIFT,
.clkdm_name = "l3_instr_clkdm",
};
DEFINE_STRUCT_CLK(l3_instr_ick, l3_instr_ick_parent_names, l3_instr_ick_ops);
static struct clk l3_main_3_ick;
static struct clk_hw_omap l3_main_3_ick_hw = {
.hw = {
.clk = &l3_main_3_ick,
},
.enable_reg = OMAP4430_CM_L3INSTR_L3_3_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL_SHIFT,
.clkdm_name = "l3_instr_clkdm",
};
DEFINE_STRUCT_CLK(l3_main_3_ick, l3_instr_ick_parent_names, l3_instr_ick_ops);
DEFINE_CLK_MUX(mcasp_sync_mux_ck, dmic_sync_mux_ck_parents, NULL, 0x0,
OMAP4430_CM1_ABE_MCASP_CLKCTRL,
OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT,
@ -1016,17 +887,13 @@ static const struct clksel func_mcasp_abe_gfclk_sel[] = {
{ .parent = NULL },
};
static const char *mcasp_fck_parents[] = {
static const char *func_mcasp_abe_gfclk_parents[] = {
"mcasp_sync_mux_ck", "pad_clks_ck", "slimbus_clk",
};
/* Merged func_mcasp_abe_gfclk into mcasp */
DEFINE_CLK_OMAP_MUX_GATE(mcasp_fck, "abe_clkdm", func_mcasp_abe_gfclk_sel,
OMAP4430_CM1_ABE_MCASP_CLKCTRL,
OMAP4430_CLKSEL_SOURCE_MASK,
OMAP4430_CM1_ABE_MCASP_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL,
mcasp_fck_parents, dmic_fck_ops);
DEFINE_CLK_OMAP_MUX(func_mcasp_abe_gfclk, "abe_clkdm", func_mcasp_abe_gfclk_sel,
OMAP4430_CM1_ABE_MCASP_CLKCTRL, OMAP4430_CLKSEL_SOURCE_MASK,
func_mcasp_abe_gfclk_parents, func_dmic_abe_gfclk_ops);
DEFINE_CLK_MUX(mcbsp1_sync_mux_ck, dmic_sync_mux_ck_parents, NULL, 0x0,
OMAP4430_CM1_ABE_MCBSP1_CLKCTRL,
@ -1040,17 +907,14 @@ static const struct clksel func_mcbsp1_gfclk_sel[] = {
{ .parent = NULL },
};
static const char *mcbsp1_fck_parents[] = {
static const char *func_mcbsp1_gfclk_parents[] = {
"mcbsp1_sync_mux_ck", "pad_clks_ck", "slimbus_clk",
};
/* Merged func_mcbsp1_gfclk into mcbsp1 */
DEFINE_CLK_OMAP_MUX_GATE(mcbsp1_fck, "abe_clkdm", func_mcbsp1_gfclk_sel,
OMAP4430_CM1_ABE_MCBSP1_CLKCTRL,
OMAP4430_CLKSEL_SOURCE_MASK,
OMAP4430_CM1_ABE_MCBSP1_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL,
mcbsp1_fck_parents, dmic_fck_ops);
DEFINE_CLK_OMAP_MUX(func_mcbsp1_gfclk, "abe_clkdm", func_mcbsp1_gfclk_sel,
OMAP4430_CM1_ABE_MCBSP1_CLKCTRL,
OMAP4430_CLKSEL_SOURCE_MASK, func_mcbsp1_gfclk_parents,
func_dmic_abe_gfclk_ops);
DEFINE_CLK_MUX(mcbsp2_sync_mux_ck, dmic_sync_mux_ck_parents, NULL, 0x0,
OMAP4430_CM1_ABE_MCBSP2_CLKCTRL,
@ -1064,17 +928,14 @@ static const struct clksel func_mcbsp2_gfclk_sel[] = {
{ .parent = NULL },
};
static const char *mcbsp2_fck_parents[] = {
static const char *func_mcbsp2_gfclk_parents[] = {
"mcbsp2_sync_mux_ck", "pad_clks_ck", "slimbus_clk",
};
/* Merged func_mcbsp2_gfclk into mcbsp2 */
DEFINE_CLK_OMAP_MUX_GATE(mcbsp2_fck, "abe_clkdm", func_mcbsp2_gfclk_sel,
OMAP4430_CM1_ABE_MCBSP2_CLKCTRL,
OMAP4430_CLKSEL_SOURCE_MASK,
OMAP4430_CM1_ABE_MCBSP2_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL,
mcbsp2_fck_parents, dmic_fck_ops);
DEFINE_CLK_OMAP_MUX(func_mcbsp2_gfclk, "abe_clkdm", func_mcbsp2_gfclk_sel,
OMAP4430_CM1_ABE_MCBSP2_CLKCTRL,
OMAP4430_CLKSEL_SOURCE_MASK, func_mcbsp2_gfclk_parents,
func_dmic_abe_gfclk_ops);
DEFINE_CLK_MUX(mcbsp3_sync_mux_ck, dmic_sync_mux_ck_parents, NULL, 0x0,
OMAP4430_CM1_ABE_MCBSP3_CLKCTRL,
@ -1088,17 +949,14 @@ static const struct clksel func_mcbsp3_gfclk_sel[] = {
{ .parent = NULL },
};
static const char *mcbsp3_fck_parents[] = {
static const char *func_mcbsp3_gfclk_parents[] = {
"mcbsp3_sync_mux_ck", "pad_clks_ck", "slimbus_clk",
};
/* Merged func_mcbsp3_gfclk into mcbsp3 */
DEFINE_CLK_OMAP_MUX_GATE(mcbsp3_fck, "abe_clkdm", func_mcbsp3_gfclk_sel,
OMAP4430_CM1_ABE_MCBSP3_CLKCTRL,
OMAP4430_CLKSEL_SOURCE_MASK,
OMAP4430_CM1_ABE_MCBSP3_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL,
mcbsp3_fck_parents, dmic_fck_ops);
DEFINE_CLK_OMAP_MUX(func_mcbsp3_gfclk, "abe_clkdm", func_mcbsp3_gfclk_sel,
OMAP4430_CM1_ABE_MCBSP3_CLKCTRL,
OMAP4430_CLKSEL_SOURCE_MASK, func_mcbsp3_gfclk_parents,
func_dmic_abe_gfclk_ops);
static const char *mcbsp4_sync_mux_ck_parents[] = {
"func_96m_fclk", "per_abe_nc_fclk",
@ -1115,37 +973,14 @@ static const struct clksel per_mcbsp4_gfclk_sel[] = {
{ .parent = NULL },
};
static const char *mcbsp4_fck_parents[] = {
static const char *per_mcbsp4_gfclk_parents[] = {
"mcbsp4_sync_mux_ck", "pad_clks_ck",
};
/* Merged per_mcbsp4_gfclk into mcbsp4 */
DEFINE_CLK_OMAP_MUX_GATE(mcbsp4_fck, "l4_per_clkdm", per_mcbsp4_gfclk_sel,
OMAP4430_CM_L4PER_MCBSP4_CLKCTRL,
OMAP4430_CLKSEL_SOURCE_24_24_MASK,
OMAP4430_CM_L4PER_MCBSP4_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL,
mcbsp4_fck_parents, dmic_fck_ops);
DEFINE_CLK_GATE(mcpdm_fck, "pad_clks_ck", &pad_clks_ck, 0x0,
OMAP4430_CM1_ABE_PDM_CLKCTRL, OMAP4430_MODULEMODE_SWCTRL_SHIFT,
0x0, NULL);
DEFINE_CLK_GATE(mcspi1_fck, "func_48m_fclk", &func_48m_fclk, 0x0,
OMAP4430_CM_L4PER_MCSPI1_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(mcspi2_fck, "func_48m_fclk", &func_48m_fclk, 0x0,
OMAP4430_CM_L4PER_MCSPI2_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(mcspi3_fck, "func_48m_fclk", &func_48m_fclk, 0x0,
OMAP4430_CM_L4PER_MCSPI3_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(mcspi4_fck, "func_48m_fclk", &func_48m_fclk, 0x0,
OMAP4430_CM_L4PER_MCSPI4_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_OMAP_MUX(per_mcbsp4_gfclk, "l4_per_clkdm", per_mcbsp4_gfclk_sel,
OMAP4430_CM_L4PER_MCBSP4_CLKCTRL,
OMAP4430_CLKSEL_SOURCE_24_24_MASK, per_mcbsp4_gfclk_parents,
func_dmic_abe_gfclk_ops);
static const struct clksel hsmmc1_fclk_sel[] = {
{ .parent = &func_64m_fclk, .rates = div_1_0_rates },
@ -1153,69 +988,22 @@ static const struct clksel hsmmc1_fclk_sel[] = {
{ .parent = NULL },
};
static const char *mmc1_fck_parents[] = {
static const char *hsmmc1_fclk_parents[] = {
"func_64m_fclk", "func_96m_fclk",
};
/* Merged hsmmc1_fclk into mmc1 */
DEFINE_CLK_OMAP_MUX_GATE(mmc1_fck, "l3_init_clkdm", hsmmc1_fclk_sel,
OMAP4430_CM_L3INIT_MMC1_CLKCTRL, OMAP4430_CLKSEL_MASK,
OMAP4430_CM_L3INIT_MMC1_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL,
mmc1_fck_parents, dmic_fck_ops);
DEFINE_CLK_OMAP_MUX(hsmmc1_fclk, "l3_init_clkdm", hsmmc1_fclk_sel,
OMAP4430_CM_L3INIT_MMC1_CLKCTRL, OMAP4430_CLKSEL_MASK,
hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops);
/* Merged hsmmc2_fclk into mmc2 */
DEFINE_CLK_OMAP_MUX_GATE(mmc2_fck, "l3_init_clkdm", hsmmc1_fclk_sel,
OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK,
OMAP4430_CM_L3INIT_MMC2_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL,
mmc1_fck_parents, dmic_fck_ops);
DEFINE_CLK_GATE(mmc3_fck, "func_48m_fclk", &func_48m_fclk, 0x0,
OMAP4430_CM_L4PER_MMCSD3_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(mmc4_fck, "func_48m_fclk", &func_48m_fclk, 0x0,
OMAP4430_CM_L4PER_MMCSD4_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(mmc5_fck, "func_48m_fclk", &func_48m_fclk, 0x0,
OMAP4430_CM_L4PER_MMCSD5_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0,
OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(ocp2scp_usb_phy_ick, "l4_div_ck", &l4_div_ck, 0x0,
OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL);
static struct clk ocp_wp_noc_ick;
static struct clk_hw_omap ocp_wp_noc_ick_hw = {
.hw = {
.clk = &ocp_wp_noc_ick,
},
.enable_reg = OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL_SHIFT,
.clkdm_name = "l3_instr_clkdm",
};
DEFINE_STRUCT_CLK(ocp_wp_noc_ick, l3_instr_ick_parent_names, l3_instr_ick_ops);
DEFINE_CLK_GATE(rng_ick, "l4_div_ck", &l4_div_ck, 0x0,
OMAP4430_CM_L4SEC_RNG_CLKCTRL, OMAP4430_MODULEMODE_HWCTRL_SHIFT,
0x0, NULL);
DEFINE_CLK_OMAP_MUX(hsmmc2_fclk, "l3_init_clkdm", hsmmc1_fclk_sel,
OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK,
hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops);
DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0,
OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(sl2if_ick, "dpll_iva_m5x2_ck", &dpll_iva_m5x2_ck, 0x0,
OMAP4430_CM_IVAHD_SL2_CLKCTRL, OMAP4430_MODULEMODE_HWCTRL_SHIFT,
0x0, NULL);
DEFINE_CLK_GATE(slimbus1_fclk_1, "func_24m_clk", &func_24m_clk, 0x0,
OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
OMAP4430_OPTFCLKEN_FCLK1_SHIFT, 0x0, NULL);
@ -1232,10 +1020,6 @@ DEFINE_CLK_GATE(slimbus1_slimbus_clk, "slimbus_clk", &slimbus_clk, 0x0,
OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(slimbus1_fck, "ocp_abe_iclk", &ocp_abe_iclk, 0x0,
OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(slimbus2_fclk_1, "per_abe_24m_fclk", &per_abe_24m_fclk, 0x0,
OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL,
OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT, 0x0, NULL);
@ -1249,10 +1033,6 @@ DEFINE_CLK_GATE(slimbus2_slimbus_clk, "pad_slimbus_core_clks_ck",
OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL,
OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(slimbus2_fck, "l4_div_ck", &l4_div_ck, 0x0,
OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(smartreflex_core_fck, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck,
0x0, OMAP4430_CM_ALWON_SR_CORE_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
@ -1271,52 +1051,35 @@ static const struct clksel dmt1_clk_mux_sel[] = {
{ .parent = NULL },
};
/* Merged dmt1_clk_mux into timer1 */
DEFINE_CLK_OMAP_MUX_GATE(timer1_fck, "l4_wkup_clkdm", dmt1_clk_mux_sel,
OMAP4430_CM_WKUP_TIMER1_CLKCTRL, OMAP4430_CLKSEL_MASK,
OMAP4430_CM_WKUP_TIMER1_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL,
abe_dpll_bypass_clk_mux_ck_parents, dmic_fck_ops);
DEFINE_CLK_OMAP_MUX(dmt1_clk_mux, "l4_wkup_clkdm", dmt1_clk_mux_sel,
OMAP4430_CM_WKUP_TIMER1_CLKCTRL, OMAP4430_CLKSEL_MASK,
abe_dpll_bypass_clk_mux_ck_parents,
func_dmic_abe_gfclk_ops);
/* Merged cm2_dm10_mux into timer10 */
DEFINE_CLK_OMAP_MUX_GATE(timer10_fck, "l4_per_clkdm", dmt1_clk_mux_sel,
OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL,
OMAP4430_CLKSEL_MASK,
OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL,
abe_dpll_bypass_clk_mux_ck_parents, dmic_fck_ops);
DEFINE_CLK_OMAP_MUX(cm2_dm10_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL, OMAP4430_CLKSEL_MASK,
abe_dpll_bypass_clk_mux_ck_parents,
func_dmic_abe_gfclk_ops);
/* Merged cm2_dm11_mux into timer11 */
DEFINE_CLK_OMAP_MUX_GATE(timer11_fck, "l4_per_clkdm", dmt1_clk_mux_sel,
OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL,
OMAP4430_CLKSEL_MASK,
OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL,
abe_dpll_bypass_clk_mux_ck_parents, dmic_fck_ops);
DEFINE_CLK_OMAP_MUX(cm2_dm11_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL, OMAP4430_CLKSEL_MASK,
abe_dpll_bypass_clk_mux_ck_parents,
func_dmic_abe_gfclk_ops);
/* Merged cm2_dm2_mux into timer2 */
DEFINE_CLK_OMAP_MUX_GATE(timer2_fck, "l4_per_clkdm", dmt1_clk_mux_sel,
OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL,
OMAP4430_CLKSEL_MASK,
OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL,
abe_dpll_bypass_clk_mux_ck_parents, dmic_fck_ops);
DEFINE_CLK_OMAP_MUX(cm2_dm2_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL, OMAP4430_CLKSEL_MASK,
abe_dpll_bypass_clk_mux_ck_parents,
func_dmic_abe_gfclk_ops);
/* Merged cm2_dm3_mux into timer3 */
DEFINE_CLK_OMAP_MUX_GATE(timer3_fck, "l4_per_clkdm", dmt1_clk_mux_sel,
OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL,
OMAP4430_CLKSEL_MASK,
OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL,
abe_dpll_bypass_clk_mux_ck_parents, dmic_fck_ops);
DEFINE_CLK_OMAP_MUX(cm2_dm3_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL, OMAP4430_CLKSEL_MASK,
abe_dpll_bypass_clk_mux_ck_parents,
func_dmic_abe_gfclk_ops);
/* Merged cm2_dm4_mux into timer4 */
DEFINE_CLK_OMAP_MUX_GATE(timer4_fck, "l4_per_clkdm", dmt1_clk_mux_sel,
OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL,
OMAP4430_CLKSEL_MASK,
OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL,
abe_dpll_bypass_clk_mux_ck_parents, dmic_fck_ops);
DEFINE_CLK_OMAP_MUX(cm2_dm4_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL, OMAP4430_CLKSEL_MASK,
abe_dpll_bypass_clk_mux_ck_parents,
func_dmic_abe_gfclk_ops);
static const struct clksel timer5_sync_mux_sel[] = {
{ .parent = &syc_clk_div_ck, .rates = div_1_0_rates },
@ -1324,61 +1087,30 @@ static const struct clksel timer5_sync_mux_sel[] = {
{ .parent = NULL },
};
static const char *timer5_fck_parents[] = {
static const char *timer5_sync_mux_parents[] = {
"syc_clk_div_ck", "sys_32k_ck",
};
/* Merged timer5_sync_mux into timer5 */
DEFINE_CLK_OMAP_MUX_GATE(timer5_fck, "abe_clkdm", timer5_sync_mux_sel,
OMAP4430_CM1_ABE_TIMER5_CLKCTRL, OMAP4430_CLKSEL_MASK,
OMAP4430_CM1_ABE_TIMER5_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL,
timer5_fck_parents, dmic_fck_ops);
DEFINE_CLK_OMAP_MUX(timer5_sync_mux, "abe_clkdm", timer5_sync_mux_sel,
OMAP4430_CM1_ABE_TIMER5_CLKCTRL, OMAP4430_CLKSEL_MASK,
timer5_sync_mux_parents, func_dmic_abe_gfclk_ops);
/* Merged timer6_sync_mux into timer6 */
DEFINE_CLK_OMAP_MUX_GATE(timer6_fck, "abe_clkdm", timer5_sync_mux_sel,
OMAP4430_CM1_ABE_TIMER6_CLKCTRL, OMAP4430_CLKSEL_MASK,
OMAP4430_CM1_ABE_TIMER6_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL,
timer5_fck_parents, dmic_fck_ops);
DEFINE_CLK_OMAP_MUX(timer6_sync_mux, "abe_clkdm", timer5_sync_mux_sel,
OMAP4430_CM1_ABE_TIMER6_CLKCTRL, OMAP4430_CLKSEL_MASK,
timer5_sync_mux_parents, func_dmic_abe_gfclk_ops);
/* Merged timer7_sync_mux into timer7 */
DEFINE_CLK_OMAP_MUX_GATE(timer7_fck, "abe_clkdm", timer5_sync_mux_sel,
OMAP4430_CM1_ABE_TIMER7_CLKCTRL, OMAP4430_CLKSEL_MASK,
OMAP4430_CM1_ABE_TIMER7_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL,
timer5_fck_parents, dmic_fck_ops);
DEFINE_CLK_OMAP_MUX(timer7_sync_mux, "abe_clkdm", timer5_sync_mux_sel,
OMAP4430_CM1_ABE_TIMER7_CLKCTRL, OMAP4430_CLKSEL_MASK,
timer5_sync_mux_parents, func_dmic_abe_gfclk_ops);
/* Merged timer8_sync_mux into timer8 */
DEFINE_CLK_OMAP_MUX_GATE(timer8_fck, "abe_clkdm", timer5_sync_mux_sel,
OMAP4430_CM1_ABE_TIMER8_CLKCTRL, OMAP4430_CLKSEL_MASK,
OMAP4430_CM1_ABE_TIMER8_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL,
timer5_fck_parents, dmic_fck_ops);
DEFINE_CLK_OMAP_MUX(timer8_sync_mux, "abe_clkdm", timer5_sync_mux_sel,
OMAP4430_CM1_ABE_TIMER8_CLKCTRL, OMAP4430_CLKSEL_MASK,
timer5_sync_mux_parents, func_dmic_abe_gfclk_ops);
/* Merged cm2_dm9_mux into timer9 */
DEFINE_CLK_OMAP_MUX_GATE(timer9_fck, "l4_per_clkdm", dmt1_clk_mux_sel,
OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL,
OMAP4430_CLKSEL_MASK,
OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL,
abe_dpll_bypass_clk_mux_ck_parents, dmic_fck_ops);
DEFINE_CLK_GATE(uart1_fck, "func_48m_fclk", &func_48m_fclk, 0x0,
OMAP4430_CM_L4PER_UART1_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(uart2_fck, "func_48m_fclk", &func_48m_fclk, 0x0,
OMAP4430_CM_L4PER_UART2_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(uart3_fck, "func_48m_fclk", &func_48m_fclk, 0x0,
OMAP4430_CM_L4PER_UART3_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(uart4_fck, "func_48m_fclk", &func_48m_fclk, 0x0,
OMAP4430_CM_L4PER_UART4_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
DEFINE_CLK_OMAP_MUX(cm2_dm9_mux, "l4_per_clkdm", dmt1_clk_mux_sel,
OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL, OMAP4430_CLKSEL_MASK,
abe_dpll_bypass_clk_mux_ck_parents,
func_dmic_abe_gfclk_ops);
static struct clk usb_host_fs_fck;
@ -1512,18 +1244,6 @@ DEFINE_CLK_GATE(usim_fclk, "usim_ck", &usim_ck, 0x0,
OMAP4430_CM_WKUP_USIM_CLKCTRL, OMAP4430_OPTFCLKEN_FCLK_SHIFT,
0x0, NULL);
DEFINE_CLK_GATE(usim_fck, "sys_32k_ck", &sys_32k_ck, 0x0,
OMAP4430_CM_WKUP_USIM_CLKCTRL, OMAP4430_MODULEMODE_HWCTRL_SHIFT,
0x0, NULL);
DEFINE_CLK_GATE(wd_timer2_fck, "sys_32k_ck", &sys_32k_ck, 0x0,
OMAP4430_CM_WKUP_WDT2_CLKCTRL, OMAP4430_MODULEMODE_SWCTRL_SHIFT,
0x0, NULL);
DEFINE_CLK_GATE(wd_timer3_fck, "sys_32k_ck", &sys_32k_ck, 0x0,
OMAP4430_CM1_ABE_WDT3_CLKCTRL, OMAP4430_MODULEMODE_SWCTRL_SHIFT,
0x0, NULL);
/* Remaining optional clocks */
static const char *pmd_stm_clock_mux_ck_parents[] = {
"sys_clkin_ck", "dpll_core_m6x2_ck", "tie_low_clock_ck",
@ -1774,106 +1494,61 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "syc_clk_div_ck", &syc_clk_div_ck, CK_443X),
CLK(NULL, "aes1_fck", &aes1_fck, CK_443X),
CLK(NULL, "aes2_fck", &aes2_fck, CK_443X),
CLK(NULL, "aess_fck", &aess_fck, CK_443X),
CLK(NULL, "bandgap_fclk", &bandgap_fclk, CK_443X),
CLK(NULL, "div_ts_ck", &div_ts_ck, CK_446X),
CLK(NULL, "bandgap_ts_fclk", &bandgap_ts_fclk, CK_446X),
CLK(NULL, "des3des_fck", &des3des_fck, CK_443X),
CLK(NULL, "dmic_sync_mux_ck", &dmic_sync_mux_ck, CK_443X),
CLK(NULL, "dmic_fck", &dmic_fck, CK_443X),
CLK(NULL, "dsp_fck", &dsp_fck, CK_443X),
CLK(NULL, "func_dmic_abe_gfclk", &func_dmic_abe_gfclk, CK_443X),
CLK(NULL, "dss_sys_clk", &dss_sys_clk, CK_443X),
CLK(NULL, "dss_tv_clk", &dss_tv_clk, CK_443X),
CLK(NULL, "dss_dss_clk", &dss_dss_clk, CK_443X),
CLK(NULL, "dss_48mhz_clk", &dss_48mhz_clk, CK_443X),
CLK(NULL, "dss_fck", &dss_fck, CK_443X),
CLK("omapdss_dss", "ick", &dss_fck, CK_443X),
CLK(NULL, "efuse_ctrl_cust_fck", &efuse_ctrl_cust_fck, CK_443X),
CLK(NULL, "emif1_fck", &emif1_fck, CK_443X),
CLK(NULL, "emif2_fck", &emif2_fck, CK_443X),
CLK(NULL, "fdif_fck", &fdif_fck, CK_443X),
CLK(NULL, "fpka_fck", &fpka_fck, CK_443X),
CLK(NULL, "gpio1_dbclk", &gpio1_dbclk, CK_443X),
CLK(NULL, "gpio1_ick", &gpio1_ick, CK_443X),
CLK(NULL, "gpio2_dbclk", &gpio2_dbclk, CK_443X),
CLK(NULL, "gpio2_ick", &gpio2_ick, CK_443X),
CLK(NULL, "gpio3_dbclk", &gpio3_dbclk, CK_443X),
CLK(NULL, "gpio3_ick", &gpio3_ick, CK_443X),
CLK(NULL, "gpio4_dbclk", &gpio4_dbclk, CK_443X),
CLK(NULL, "gpio4_ick", &gpio4_ick, CK_443X),
CLK(NULL, "gpio5_dbclk", &gpio5_dbclk, CK_443X),
CLK(NULL, "gpio5_ick", &gpio5_ick, CK_443X),
CLK(NULL, "gpio6_dbclk", &gpio6_dbclk, CK_443X),
CLK(NULL, "gpio6_ick", &gpio6_ick, CK_443X),
CLK(NULL, "gpmc_ick", &gpmc_ick, CK_443X),
CLK(NULL, "gpu_fck", &gpu_fck, CK_443X),
CLK(NULL, "hdq1w_fck", &hdq1w_fck, CK_443X),
CLK(NULL, "sgx_clk_mux", &sgx_clk_mux, CK_443X),
CLK(NULL, "hsi_fck", &hsi_fck, CK_443X),
CLK(NULL, "i2c1_fck", &i2c1_fck, CK_443X),
CLK(NULL, "i2c2_fck", &i2c2_fck, CK_443X),
CLK(NULL, "i2c3_fck", &i2c3_fck, CK_443X),
CLK(NULL, "i2c4_fck", &i2c4_fck, CK_443X),
CLK(NULL, "ipu_fck", &ipu_fck, CK_443X),
CLK(NULL, "iss_ctrlclk", &iss_ctrlclk, CK_443X),
CLK(NULL, "iss_fck", &iss_fck, CK_443X),
CLK(NULL, "iva_fck", &iva_fck, CK_443X),
CLK(NULL, "kbd_fck", &kbd_fck, CK_443X),
CLK(NULL, "l3_instr_ick", &l3_instr_ick, CK_443X),
CLK(NULL, "l3_main_3_ick", &l3_main_3_ick, CK_443X),
CLK(NULL, "mcasp_sync_mux_ck", &mcasp_sync_mux_ck, CK_443X),
CLK(NULL, "mcasp_fck", &mcasp_fck, CK_443X),
CLK(NULL, "func_mcasp_abe_gfclk", &func_mcasp_abe_gfclk, CK_443X),
CLK(NULL, "mcbsp1_sync_mux_ck", &mcbsp1_sync_mux_ck, CK_443X),
CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_443X),
CLK(NULL, "func_mcbsp1_gfclk", &func_mcbsp1_gfclk, CK_443X),
CLK(NULL, "mcbsp2_sync_mux_ck", &mcbsp2_sync_mux_ck, CK_443X),
CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_443X),
CLK(NULL, "func_mcbsp2_gfclk", &func_mcbsp2_gfclk, CK_443X),
CLK(NULL, "mcbsp3_sync_mux_ck", &mcbsp3_sync_mux_ck, CK_443X),
CLK(NULL, "mcbsp3_fck", &mcbsp3_fck, CK_443X),
CLK(NULL, "func_mcbsp3_gfclk", &func_mcbsp3_gfclk, CK_443X),
CLK(NULL, "mcbsp4_sync_mux_ck", &mcbsp4_sync_mux_ck, CK_443X),
CLK(NULL, "mcbsp4_fck", &mcbsp4_fck, CK_443X),
CLK(NULL, "mcpdm_fck", &mcpdm_fck, CK_443X),
CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_443X),
CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_443X),
CLK(NULL, "mcspi3_fck", &mcspi3_fck, CK_443X),
CLK(NULL, "mcspi4_fck", &mcspi4_fck, CK_443X),
CLK(NULL, "mmc1_fck", &mmc1_fck, CK_443X),
CLK(NULL, "mmc2_fck", &mmc2_fck, CK_443X),
CLK(NULL, "mmc3_fck", &mmc3_fck, CK_443X),
CLK(NULL, "mmc4_fck", &mmc4_fck, CK_443X),
CLK(NULL, "mmc5_fck", &mmc5_fck, CK_443X),
CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m, CK_443X),
CLK(NULL, "ocp2scp_usb_phy_ick", &ocp2scp_usb_phy_ick, CK_443X),
CLK(NULL, "ocp_wp_noc_ick", &ocp_wp_noc_ick, CK_443X),
CLK(NULL, "rng_ick", &rng_ick, CK_443X),
CLK("omap_rng", "ick", &rng_ick, CK_443X),
CLK(NULL, "per_mcbsp4_gfclk", &per_mcbsp4_gfclk, CK_443X),
CLK(NULL, "hsmmc1_fclk", &hsmmc1_fclk, CK_443X),
CLK(NULL, "hsmmc2_fclk", &hsmmc2_fclk, CK_443X),
CLK(NULL, "sha2md5_fck", &sha2md5_fck, CK_443X),
CLK(NULL, "sl2if_ick", &sl2if_ick, CK_443X),
CLK(NULL, "slimbus1_fclk_1", &slimbus1_fclk_1, CK_443X),
CLK(NULL, "slimbus1_fclk_0", &slimbus1_fclk_0, CK_443X),
CLK(NULL, "slimbus1_fclk_2", &slimbus1_fclk_2, CK_443X),
CLK(NULL, "slimbus1_slimbus_clk", &slimbus1_slimbus_clk, CK_443X),
CLK(NULL, "slimbus1_fck", &slimbus1_fck, CK_443X),
CLK(NULL, "slimbus2_fclk_1", &slimbus2_fclk_1, CK_443X),
CLK(NULL, "slimbus2_fclk_0", &slimbus2_fclk_0, CK_443X),
CLK(NULL, "slimbus2_slimbus_clk", &slimbus2_slimbus_clk, CK_443X),
CLK(NULL, "slimbus2_fck", &slimbus2_fck, CK_443X),
CLK(NULL, "smartreflex_core_fck", &smartreflex_core_fck, CK_443X),
CLK(NULL, "smartreflex_iva_fck", &smartreflex_iva_fck, CK_443X),
CLK(NULL, "smartreflex_mpu_fck", &smartreflex_mpu_fck, CK_443X),
CLK(NULL, "timer1_fck", &timer1_fck, CK_443X),
CLK(NULL, "timer10_fck", &timer10_fck, CK_443X),
CLK(NULL, "timer11_fck", &timer11_fck, CK_443X),
CLK(NULL, "timer2_fck", &timer2_fck, CK_443X),
CLK(NULL, "timer3_fck", &timer3_fck, CK_443X),
CLK(NULL, "timer4_fck", &timer4_fck, CK_443X),
CLK(NULL, "timer5_fck", &timer5_fck, CK_443X),
CLK(NULL, "timer6_fck", &timer6_fck, CK_443X),
CLK(NULL, "timer7_fck", &timer7_fck, CK_443X),
CLK(NULL, "timer8_fck", &timer8_fck, CK_443X),
CLK(NULL, "timer9_fck", &timer9_fck, CK_443X),
CLK(NULL, "uart1_fck", &uart1_fck, CK_443X),
CLK(NULL, "uart2_fck", &uart2_fck, CK_443X),
CLK(NULL, "uart3_fck", &uart3_fck, CK_443X),
CLK(NULL, "uart4_fck", &uart4_fck, CK_443X),
CLK(NULL, "dmt1_clk_mux", &dmt1_clk_mux, CK_443X),
CLK(NULL, "cm2_dm10_mux", &cm2_dm10_mux, CK_443X),
CLK(NULL, "cm2_dm11_mux", &cm2_dm11_mux, CK_443X),
CLK(NULL, "cm2_dm2_mux", &cm2_dm2_mux, CK_443X),
CLK(NULL, "cm2_dm3_mux", &cm2_dm3_mux, CK_443X),
CLK(NULL, "cm2_dm4_mux", &cm2_dm4_mux, CK_443X),
CLK(NULL, "timer5_sync_mux", &timer5_sync_mux, CK_443X),
CLK(NULL, "timer6_sync_mux", &timer6_sync_mux, CK_443X),
CLK(NULL, "timer7_sync_mux", &timer7_sync_mux, CK_443X),
CLK(NULL, "timer8_sync_mux", &timer8_sync_mux, CK_443X),
CLK(NULL, "cm2_dm9_mux", &cm2_dm9_mux, CK_443X),
CLK(NULL, "usb_host_fs_fck", &usb_host_fs_fck, CK_443X),
CLK("usbhs_omap", "fs_fck", &usb_host_fs_fck, CK_443X),
CLK(NULL, "utmi_p1_gfclk", &utmi_p1_gfclk, CK_443X),
@ -1901,9 +1576,6 @@ static struct omap_clk omap44xx_clks[] = {
CLK("usbhs_tll", "usbtll_ick", &usb_tll_hs_ick, CK_443X),
CLK(NULL, "usim_ck", &usim_ck, CK_443X),
CLK(NULL, "usim_fclk", &usim_fclk, CK_443X),
CLK(NULL, "usim_fck", &usim_fck, CK_443X),
CLK(NULL, "wd_timer2_fck", &wd_timer2_fck, CK_443X),
CLK(NULL, "wd_timer3_fck", &wd_timer3_fck, CK_443X),
CLK(NULL, "pmd_stm_clock_mux_ck", &pmd_stm_clock_mux_ck, CK_443X),
CLK(NULL, "pmd_trace_clk_mux_ck", &pmd_trace_clk_mux_ck, CK_443X),
CLK(NULL, "stm_clk_div_ck", &stm_clk_div_ck, CK_443X),
@ -1980,15 +1652,6 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "cpufreq_ck", &dpll_mpu_ck, CK_443X),
};
static const char *enable_init_clks[] = {
"emif1_fck",
"emif2_fck",
"gpmc_ick",
"l3_instr_ick",
"l3_main_3_ick",
"ocp_wp_noc_ick",
};
int __init omap4xxx_clk_init(void)
{
u32 cpu_clkflg;
@ -2019,9 +1682,6 @@ int __init omap4xxx_clk_init(void)
omap2_clk_disable_autoidle_all();
omap2_clk_enable_init_clocks(enable_init_clks,
ARRAY_SIZE(enable_init_clks));
/*
* On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
* state when turning the ABE clock domain. Workaround this by

585
arch/arm/mach-omap2/clockdomain.c
View File

@ -92,8 +92,6 @@ static int _clkdm_register(struct clockdomain *clkdm)
pwrdm_add_clkdm(pwrdm, clkdm);
spin_lock_init(&clkdm->lock);
pr_debug("clockdomain: registered %s\n", clkdm->name);
return 0;
@ -122,7 +120,7 @@ static struct clkdm_dep *_clkdm_deps_lookup(struct clockdomain *clkdm,
return cd;
}
/*
/**
* _autodep_lookup - resolve autodep clkdm names to clkdm pointers; store
* @autodep: struct clkdm_autodep * to resolve
*
@ -154,66 +152,6 @@ static void _autodep_lookup(struct clkdm_autodep *autodep)
autodep->clkdm.ptr = clkdm;
}
/*
* _clkdm_add_autodeps - add auto sleepdeps/wkdeps to clkdm upon clock enable
* @clkdm: struct clockdomain *
*
* Add the "autodep" sleep & wakeup dependencies to clockdomain 'clkdm'
* in hardware-supervised mode. Meant to be called from clock framework
* when a clock inside clockdomain 'clkdm' is enabled. No return value.
*
* XXX autodeps are deprecated and should be removed at the earliest
* opportunity
*/
void _clkdm_add_autodeps(struct clockdomain *clkdm)
{
struct clkdm_autodep *autodep;
if (!autodeps || clkdm->flags & CLKDM_NO_AUTODEPS)
return;
for (autodep = autodeps; autodep->clkdm.ptr; autodep++) {
if (IS_ERR(autodep->clkdm.ptr))
continue;
pr_debug("clockdomain: %s: adding %s sleepdep/wkdep\n",
clkdm->name, autodep->clkdm.ptr->name);
clkdm_add_sleepdep(clkdm, autodep->clkdm.ptr);
clkdm_add_wkdep(clkdm, autodep->clkdm.ptr);
}
}
/*
* _clkdm_add_autodeps - remove auto sleepdeps/wkdeps from clkdm
* @clkdm: struct clockdomain *
*
* Remove the "autodep" sleep & wakeup dependencies from clockdomain 'clkdm'
* in hardware-supervised mode. Meant to be called from clock framework
* when a clock inside clockdomain 'clkdm' is disabled. No return value.
*
* XXX autodeps are deprecated and should be removed at the earliest
* opportunity
*/
void _clkdm_del_autodeps(struct clockdomain *clkdm)
{
struct clkdm_autodep *autodep;
if (!autodeps || clkdm->flags & CLKDM_NO_AUTODEPS)
return;
for (autodep = autodeps; autodep->clkdm.ptr; autodep++) {
if (IS_ERR(autodep->clkdm.ptr))
continue;
pr_debug("clockdomain: %s: removing %s sleepdep/wkdep\n",
clkdm->name, autodep->clkdm.ptr->name);
clkdm_del_sleepdep(clkdm, autodep->clkdm.ptr);
clkdm_del_wkdep(clkdm, autodep->clkdm.ptr);
}
}
/**
* _resolve_clkdm_deps() - resolve clkdm_names in @clkdm_deps to clkdms
* @clkdm: clockdomain that we are resolving dependencies for
@ -238,6 +176,184 @@ static void _resolve_clkdm_deps(struct clockdomain *clkdm,
}
}
/**
* _clkdm_add_wkdep - add a wakeup dependency from clkdm2 to clkdm1 (lockless)
* @clkdm1: wake this struct clockdomain * up (dependent)
* @clkdm2: when this struct clockdomain * wakes up (source)
*
* When the clockdomain represented by @clkdm2 wakes up, wake up
* @clkdm1. Implemented in hardware on the OMAP, this feature is
* designed to reduce wakeup latency of the dependent clockdomain @clkdm1.
* Returns -EINVAL if presented with invalid clockdomain pointers,
* -ENOENT if @clkdm2 cannot wake up clkdm1 in hardware, or 0 upon
* success.
*/
static int _clkdm_add_wkdep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
struct clkdm_dep *cd;
int ret = 0;
if (!clkdm1 || !clkdm2)
return -EINVAL;
cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
if (IS_ERR(cd))
ret = PTR_ERR(cd);
if (!arch_clkdm || !arch_clkdm->clkdm_add_wkdep)
ret = -EINVAL;
if (ret) {
pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n",
clkdm1->name, clkdm2->name);
return ret;
}
cd->wkdep_usecount++;
if (cd->wkdep_usecount == 1) {
pr_debug("clockdomain: hardware will wake up %s when %s wakes up\n",
clkdm1->name, clkdm2->name);
ret = arch_clkdm->clkdm_add_wkdep(clkdm1, clkdm2);
}
return ret;
}
/**
* _clkdm_del_wkdep - remove a wakeup dep from clkdm2 to clkdm1 (lockless)
* @clkdm1: wake this struct clockdomain * up (dependent)
* @clkdm2: when this struct clockdomain * wakes up (source)
*
* Remove a wakeup dependency causing @clkdm1 to wake up when @clkdm2
* wakes up. Returns -EINVAL if presented with invalid clockdomain
* pointers, -ENOENT if @clkdm2 cannot wake up clkdm1 in hardware, or
* 0 upon success.
*/
static int _clkdm_del_wkdep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
struct clkdm_dep *cd;
int ret = 0;
if (!clkdm1 || !clkdm2)
return -EINVAL;
cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
if (IS_ERR(cd))
ret = PTR_ERR(cd);
if (!arch_clkdm || !arch_clkdm->clkdm_del_wkdep)
ret = -EINVAL;
if (ret) {
pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n",
clkdm1->name, clkdm2->name);
return ret;
}
cd->wkdep_usecount--;
if (cd->wkdep_usecount == 0) {
pr_debug("clockdomain: hardware will no longer wake up %s after %s wakes up\n",
clkdm1->name, clkdm2->name);
ret = arch_clkdm->clkdm_del_wkdep(clkdm1, clkdm2);
}
return ret;
}
/**
* _clkdm_add_sleepdep - add a sleep dependency from clkdm2 to clkdm1 (lockless)
* @clkdm1: prevent this struct clockdomain * from sleeping (dependent)
* @clkdm2: when this struct clockdomain * is active (source)
*
* Prevent @clkdm1 from automatically going inactive (and then to
* retention or off) if @clkdm2 is active. Returns -EINVAL if
* presented with invalid clockdomain pointers or called on a machine
* that does not support software-configurable hardware sleep
* dependencies, -ENOENT if the specified dependency cannot be set in
* hardware, or 0 upon success.
*/
static int _clkdm_add_sleepdep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
struct clkdm_dep *cd;
int ret = 0;
if (!clkdm1 || !clkdm2)
return -EINVAL;
cd = _clkdm_deps_lookup(clkdm2, clkdm1->sleepdep_srcs);
if (IS_ERR(cd))
ret = PTR_ERR(cd);
if (!arch_clkdm || !arch_clkdm->clkdm_add_sleepdep)
ret = -EINVAL;
if (ret) {
pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n",
clkdm1->name, clkdm2->name);
return ret;
}
cd->sleepdep_usecount++;
if (cd->sleepdep_usecount == 1) {
pr_debug("clockdomain: will prevent %s from sleeping if %s is active\n",
clkdm1->name, clkdm2->name);
ret = arch_clkdm->clkdm_add_sleepdep(clkdm1, clkdm2);
}
return ret;
}
/**
* _clkdm_del_sleepdep - remove a sleep dep from clkdm2 to clkdm1 (lockless)
* @clkdm1: prevent this struct clockdomain * from sleeping (dependent)
* @clkdm2: when this struct clockdomain * is active (source)
*
* Allow @clkdm1 to automatically go inactive (and then to retention or
* off), independent of the activity state of @clkdm2. Returns -EINVAL
* if presented with invalid clockdomain pointers or called on a machine
* that does not support software-configurable hardware sleep dependencies,
* -ENOENT if the specified dependency cannot be cleared in hardware, or
* 0 upon success.
*/
static int _clkdm_del_sleepdep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
struct clkdm_dep *cd;
int ret = 0;
if (!clkdm1 || !clkdm2)
return -EINVAL;
cd = _clkdm_deps_lookup(clkdm2, clkdm1->sleepdep_srcs);
if (IS_ERR(cd))
ret = PTR_ERR(cd);
if (!arch_clkdm || !arch_clkdm->clkdm_del_sleepdep)
ret = -EINVAL;
if (ret) {
pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n",
clkdm1->name, clkdm2->name);
return ret;
}
cd->sleepdep_usecount--;
if (cd->sleepdep_usecount == 0) {
pr_debug("clockdomain: will no longer prevent %s from sleeping if %s is active\n",
clkdm1->name, clkdm2->name);
ret = arch_clkdm->clkdm_del_sleepdep(clkdm1, clkdm2);
}
return ret;
}
/* Public functions */
/**
@ -456,30 +572,18 @@ struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm)
int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
{
struct clkdm_dep *cd;
int ret = 0;
int ret;
if (!clkdm1 || !clkdm2)
return -EINVAL;
cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
if (IS_ERR(cd))
ret = PTR_ERR(cd);
return PTR_ERR(cd);
if (!arch_clkdm || !arch_clkdm->clkdm_add_wkdep)
ret = -EINVAL;
if (ret) {
pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n",
clkdm1->name, clkdm2->name);
return ret;
}
if (atomic_inc_return(&cd->wkdep_usecount) == 1) {
pr_debug("clockdomain: hardware will wake up %s when %s wakes up\n",
clkdm1->name, clkdm2->name);
ret = arch_clkdm->clkdm_add_wkdep(clkdm1, clkdm2);
}
pwrdm_lock(cd->clkdm->pwrdm.ptr);
ret = _clkdm_add_wkdep(clkdm1, clkdm2);
pwrdm_unlock(cd->clkdm->pwrdm.ptr);
return ret;
}
@ -497,30 +601,18 @@ int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
{
struct clkdm_dep *cd;
int ret = 0;
int ret;
if (!clkdm1 || !clkdm2)
return -EINVAL;
cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
if (IS_ERR(cd))
ret = PTR_ERR(cd);
return PTR_ERR(cd);
if (!arch_clkdm || !arch_clkdm->clkdm_del_wkdep)
ret = -EINVAL;
if (ret) {
pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n",
clkdm1->name, clkdm2->name);
return ret;
}
if (atomic_dec_return(&cd->wkdep_usecount) == 0) {
pr_debug("clockdomain: hardware will no longer wake up %s after %s wakes up\n",
clkdm1->name, clkdm2->name);
ret = arch_clkdm->clkdm_del_wkdep(clkdm1, clkdm2);
}
pwrdm_lock(cd->clkdm->pwrdm.ptr);
ret = _clkdm_del_wkdep(clkdm1, clkdm2);
pwrdm_unlock(cd->clkdm->pwrdm.ptr);
return ret;
}
@ -560,7 +652,7 @@ int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
return ret;
}
/* XXX It's faster to return the atomic wkdep_usecount */
/* XXX It's faster to return the wkdep_usecount */
return arch_clkdm->clkdm_read_wkdep(clkdm1, clkdm2);
}
@ -600,30 +692,18 @@ int clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
int clkdm_add_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
{
struct clkdm_dep *cd;
int ret = 0;
int ret;
if (!clkdm1 || !clkdm2)
return -EINVAL;
cd = _clkdm_deps_lookup(clkdm2, clkdm1->sleepdep_srcs);
cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
if (IS_ERR(cd))
ret = PTR_ERR(cd);
return PTR_ERR(cd);
if (!arch_clkdm || !arch_clkdm->clkdm_add_sleepdep)
ret = -EINVAL;
if (ret) {
pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n",
clkdm1->name, clkdm2->name);
return ret;
}
if (atomic_inc_return(&cd->sleepdep_usecount) == 1) {
pr_debug("clockdomain: will prevent %s from sleeping if %s is active\n",
clkdm1->name, clkdm2->name);
ret = arch_clkdm->clkdm_add_sleepdep(clkdm1, clkdm2);
}
pwrdm_lock(cd->clkdm->pwrdm.ptr);
ret = _clkdm_add_sleepdep(clkdm1, clkdm2);
pwrdm_unlock(cd->clkdm->pwrdm.ptr);
return ret;
}
@ -643,30 +723,18 @@ int clkdm_add_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
int clkdm_del_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
{
struct clkdm_dep *cd;
int ret = 0;
int ret;
if (!clkdm1 || !clkdm2)
return -EINVAL;
cd = _clkdm_deps_lookup(clkdm2, clkdm1->sleepdep_srcs);
cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
if (IS_ERR(cd))
ret = PTR_ERR(cd);
return PTR_ERR(cd);
if (!arch_clkdm || !arch_clkdm->clkdm_del_sleepdep)
ret = -EINVAL;
if (ret) {
pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n",
clkdm1->name, clkdm2->name);
return ret;
}
if (atomic_dec_return(&cd->sleepdep_usecount) == 0) {
pr_debug("clockdomain: will no longer prevent %s from sleeping if %s is active\n",
clkdm1->name, clkdm2->name);
ret = arch_clkdm->clkdm_del_sleepdep(clkdm1, clkdm2);
}
pwrdm_lock(cd->clkdm->pwrdm.ptr);
ret = _clkdm_del_sleepdep(clkdm1, clkdm2);
pwrdm_unlock(cd->clkdm->pwrdm.ptr);
return ret;
}
@ -708,7 +776,7 @@ int clkdm_read_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
return ret;
}
/* XXX It's faster to return the atomic sleepdep_usecount */
/* XXX It's faster to return the sleepdep_usecount */
return arch_clkdm->clkdm_read_sleepdep(clkdm1, clkdm2);
}
@ -734,18 +802,17 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
}
/**
* clkdm_sleep - force clockdomain sleep transition
* clkdm_sleep_nolock - force clockdomain sleep transition (lockless)
* @clkdm: struct clockdomain *
*
* Instruct the CM to force a sleep transition on the specified
* clockdomain @clkdm. Returns -EINVAL if @clkdm is NULL or if
* clockdomain does not support software-initiated sleep; 0 upon
* success.
* clockdomain @clkdm. Only for use by the powerdomain code. Returns
* -EINVAL if @clkdm is NULL or if clockdomain does not support
* software-initiated sleep; 0 upon success.
*/
int clkdm_sleep(struct clockdomain *clkdm)
int clkdm_sleep_nolock(struct clockdomain *clkdm)
{
int ret;
unsigned long flags;
if (!clkdm)
return -EINVAL;
@ -761,26 +828,45 @@ int clkdm_sleep(struct clockdomain *clkdm)
pr_debug("clockdomain: forcing sleep on %s\n", clkdm->name);
spin_lock_irqsave(&clkdm->lock, flags);
clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED;
ret = arch_clkdm->clkdm_sleep(clkdm);
spin_unlock_irqrestore(&clkdm->lock, flags);
ret |= pwrdm_state_switch_nolock(clkdm->pwrdm.ptr);
return ret;
}
/**
* clkdm_wakeup - force clockdomain wakeup transition
* clkdm_sleep - force clockdomain sleep transition
* @clkdm: struct clockdomain *
*
* Instruct the CM to force a sleep transition on the specified
* clockdomain @clkdm. Returns -EINVAL if @clkdm is NULL or if
* clockdomain does not support software-initiated sleep; 0 upon
* success.
*/
int clkdm_sleep(struct clockdomain *clkdm)
{
int ret;
pwrdm_lock(clkdm->pwrdm.ptr);
ret = clkdm_sleep_nolock(clkdm);
pwrdm_unlock(clkdm->pwrdm.ptr);
return ret;
}
/**
* clkdm_wakeup_nolock - force clockdomain wakeup transition (lockless)
* @clkdm: struct clockdomain *
*
* Instruct the CM to force a wakeup transition on the specified
* clockdomain @clkdm. Returns -EINVAL if @clkdm is NULL or if the
* clockdomain does not support software-controlled wakeup; 0 upon
* success.
* clockdomain @clkdm. Only for use by the powerdomain code. Returns
* -EINVAL if @clkdm is NULL or if the clockdomain does not support
* software-controlled wakeup; 0 upon success.
*/
int clkdm_wakeup(struct clockdomain *clkdm)
int clkdm_wakeup_nolock(struct clockdomain *clkdm)
{
int ret;
unsigned long flags;
if (!clkdm)
return -EINVAL;
@ -796,28 +882,46 @@ int clkdm_wakeup(struct clockdomain *clkdm)
pr_debug("clockdomain: forcing wakeup on %s\n", clkdm->name);
spin_lock_irqsave(&clkdm->lock, flags);
clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED;
ret = arch_clkdm->clkdm_wakeup(clkdm);
ret |= pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
ret |= pwrdm_state_switch_nolock(clkdm->pwrdm.ptr);
return ret;
}
/**
* clkdm_allow_idle - enable hwsup idle transitions for clkdm
* clkdm_wakeup - force clockdomain wakeup transition
* @clkdm: struct clockdomain *
*
* Allow the hardware to automatically switch the clockdomain @clkdm into
* active or idle states, as needed by downstream clocks. If the
* Instruct the CM to force a wakeup transition on the specified
* clockdomain @clkdm. Returns -EINVAL if @clkdm is NULL or if the
* clockdomain does not support software-controlled wakeup; 0 upon
* success.
*/
int clkdm_wakeup(struct clockdomain *clkdm)
{
int ret;
pwrdm_lock(clkdm->pwrdm.ptr);
ret = clkdm_wakeup_nolock(clkdm);
pwrdm_unlock(clkdm->pwrdm.ptr);
return ret;
}
/**
* clkdm_allow_idle_nolock - enable hwsup idle transitions for clkdm
* @clkdm: struct clockdomain *
*
* Allow the hardware to automatically switch the clockdomain @clkdm
* into active or idle states, as needed by downstream clocks. If the
* clockdomain has any downstream clocks enabled in the clock
* framework, wkdep/sleepdep autodependencies are added; this is so
* device drivers can read and write to the device. No return value.
* device drivers can read and write to the device. Only for use by
* the powerdomain code. No return value.
*/
void clkdm_allow_idle(struct clockdomain *clkdm)
void clkdm_allow_idle_nolock(struct clockdomain *clkdm)
{
unsigned long flags;
if (!clkdm)
return;
@ -833,11 +937,26 @@ void clkdm_allow_idle(struct clockdomain *clkdm)
pr_debug("clockdomain: enabling automatic idle transitions for %s\n",
clkdm->name);
spin_lock_irqsave(&clkdm->lock, flags);
clkdm->_flags |= _CLKDM_FLAG_HWSUP_ENABLED;
arch_clkdm->clkdm_allow_idle(clkdm);
pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
pwrdm_state_switch_nolock(clkdm->pwrdm.ptr);
}
/**
* clkdm_allow_idle - enable hwsup idle transitions for clkdm
* @clkdm: struct clockdomain *
*
* Allow the hardware to automatically switch the clockdomain @clkdm into
* active or idle states, as needed by downstream clocks. If the
* clockdomain has any downstream clocks enabled in the clock
* framework, wkdep/sleepdep autodependencies are added; this is so
* device drivers can read and write to the device. No return value.
*/
void clkdm_allow_idle(struct clockdomain *clkdm)
{
pwrdm_lock(clkdm->pwrdm.ptr);
clkdm_allow_idle_nolock(clkdm);
pwrdm_unlock(clkdm->pwrdm.ptr);
}
/**
@ -847,12 +966,11 @@ void clkdm_allow_idle(struct clockdomain *clkdm)
* Prevent the hardware from automatically switching the clockdomain
* @clkdm into inactive or idle states. If the clockdomain has
* downstream clocks enabled in the clock framework, wkdep/sleepdep
* autodependencies are removed. No return value.
* autodependencies are removed. Only for use by the powerdomain
* code. No return value.
*/
void clkdm_deny_idle(struct clockdomain *clkdm)
void clkdm_deny_idle_nolock(struct clockdomain *clkdm)
{
unsigned long flags;
if (!clkdm)
return;
@ -868,11 +986,25 @@ void clkdm_deny_idle(struct clockdomain *clkdm)
pr_debug("clockdomain: disabling automatic idle transitions for %s\n",
clkdm->name);
spin_lock_irqsave(&clkdm->lock, flags);
clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED;
arch_clkdm->clkdm_deny_idle(clkdm);
pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
pwrdm_state_switch_nolock(clkdm->pwrdm.ptr);
}
/**
* clkdm_deny_idle - disable hwsup idle transitions for clkdm
* @clkdm: struct clockdomain *
*
* Prevent the hardware from automatically switching the clockdomain
* @clkdm into inactive or idle states. If the clockdomain has
* downstream clocks enabled in the clock framework, wkdep/sleepdep
* autodependencies are removed. No return value.
*/
void clkdm_deny_idle(struct clockdomain *clkdm)
{
pwrdm_lock(clkdm->pwrdm.ptr);
clkdm_deny_idle_nolock(clkdm);
pwrdm_unlock(clkdm->pwrdm.ptr);
}
/**
@ -889,14 +1021,11 @@ void clkdm_deny_idle(struct clockdomain *clkdm)
bool clkdm_in_hwsup(struct clockdomain *clkdm)
{
bool ret;
unsigned long flags;
if (!clkdm)
return false;
spin_lock_irqsave(&clkdm->lock, flags);
ret = (clkdm->_flags & _CLKDM_FLAG_HWSUP_ENABLED) ? true : false;
spin_unlock_irqrestore(&clkdm->lock, flags);
return ret;
}
@ -918,30 +1047,91 @@ bool clkdm_missing_idle_reporting(struct clockdomain *clkdm)
return (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) ? true : false;
}
/* Public autodep handling functions (deprecated) */
/**
* clkdm_add_autodeps - add auto sleepdeps/wkdeps to clkdm upon clock enable
* @clkdm: struct clockdomain *
*
* Add the "autodep" sleep & wakeup dependencies to clockdomain 'clkdm'
* in hardware-supervised mode. Meant to be called from clock framework
* when a clock inside clockdomain 'clkdm' is enabled. No return value.
*
* XXX autodeps are deprecated and should be removed at the earliest
* opportunity
*/
void clkdm_add_autodeps(struct clockdomain *clkdm)
{
struct clkdm_autodep *autodep;
if (!autodeps || clkdm->flags & CLKDM_NO_AUTODEPS)
return;
for (autodep = autodeps; autodep->clkdm.ptr; autodep++) {
if (IS_ERR(autodep->clkdm.ptr))
continue;
pr_debug("clockdomain: %s: adding %s sleepdep/wkdep\n",
clkdm->name, autodep->clkdm.ptr->name);
_clkdm_add_sleepdep(clkdm, autodep->clkdm.ptr);
_clkdm_add_wkdep(clkdm, autodep->clkdm.ptr);
}
}
/**
* clkdm_del_autodeps - remove auto sleepdeps/wkdeps from clkdm
* @clkdm: struct clockdomain *
*
* Remove the "autodep" sleep & wakeup dependencies from clockdomain 'clkdm'
* in hardware-supervised mode. Meant to be called from clock framework
* when a clock inside clockdomain 'clkdm' is disabled. No return value.
*
* XXX autodeps are deprecated and should be removed at the earliest
* opportunity
*/
void clkdm_del_autodeps(struct clockdomain *clkdm)
{
struct clkdm_autodep *autodep;
if (!autodeps || clkdm->flags & CLKDM_NO_AUTODEPS)
return;
for (autodep = autodeps; autodep->clkdm.ptr; autodep++) {
if (IS_ERR(autodep->clkdm.ptr))
continue;
pr_debug("clockdomain: %s: removing %s sleepdep/wkdep\n",
clkdm->name, autodep->clkdm.ptr->name);
_clkdm_del_sleepdep(clkdm, autodep->clkdm.ptr);
_clkdm_del_wkdep(clkdm, autodep->clkdm.ptr);
}
}
/* Clockdomain-to-clock/hwmod framework interface code */
static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm)
{
unsigned long flags;
if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_enable)
return -EINVAL;
spin_lock_irqsave(&clkdm->lock, flags);
pwrdm_lock(clkdm->pwrdm.ptr);
/*
* For arch's with no autodeps, clkcm_clk_enable
* should be called for every clock instance or hwmod that is
* enabled, so the clkdm can be force woken up.
*/
if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps) {
spin_unlock_irqrestore(&clkdm->lock, flags);
clkdm->usecount++;
if (clkdm->usecount > 1 && autodeps) {
pwrdm_unlock(clkdm->pwrdm.ptr);
return 0;
}
arch_clkdm->clkdm_clk_enable(clkdm);
pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
pwrdm_state_switch_nolock(clkdm->pwrdm.ptr);
pwrdm_unlock(clkdm->pwrdm.ptr);
pr_debug("clockdomain: %s: enabled\n", clkdm->name);
@ -990,36 +1180,34 @@ int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
*/
int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
{
unsigned long flags;
if (!clkdm || !clk || !arch_clkdm || !arch_clkdm->clkdm_clk_disable)
return -EINVAL;
spin_lock_irqsave(&clkdm->lock, flags);
pwrdm_lock(clkdm->pwrdm.ptr);
/* corner case: disabling unused clocks */
if ((__clk_get_enable_count(clk) == 0) &&
(atomic_read(&clkdm->usecount) == 0))
if ((__clk_get_enable_count(clk) == 0) && clkdm->usecount == 0)
goto ccd_exit;
if (atomic_read(&clkdm->usecount) == 0) {
spin_unlock_irqrestore(&clkdm->lock, flags);
if (clkdm->usecount == 0) {
pwrdm_unlock(clkdm->pwrdm.ptr);
WARN_ON(1); /* underflow */
return -ERANGE;
}
if (atomic_dec_return(&clkdm->usecount) > 0) {
spin_unlock_irqrestore(&clkdm->lock, flags);
clkdm->usecount--;
if (clkdm->usecount > 0) {
pwrdm_unlock(clkdm->pwrdm.ptr);
return 0;
}
arch_clkdm->clkdm_clk_disable(clkdm);
pwrdm_state_switch(clkdm->pwrdm.ptr);
pwrdm_state_switch_nolock(clkdm->pwrdm.ptr);
pr_debug("clockdomain: %s: disabled\n", clkdm->name);
ccd_exit:
spin_unlock_irqrestore(&clkdm->lock, flags);
pwrdm_unlock(clkdm->pwrdm.ptr);
return 0;
}
@ -1072,8 +1260,6 @@ int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh)
*/
int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh)
{
unsigned long flags;
/* The clkdm attribute does not exist yet prior OMAP4 */
if (cpu_is_omap24xx() || cpu_is_omap34xx())
return 0;
@ -1086,22 +1272,23 @@ int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh)
if (!clkdm || !oh || !arch_clkdm || !arch_clkdm->clkdm_clk_disable)
return -EINVAL;
spin_lock_irqsave(&clkdm->lock, flags);
pwrdm_lock(clkdm->pwrdm.ptr);
if (atomic_read(&clkdm->usecount) == 0) {
spin_unlock_irqrestore(&clkdm->lock, flags);
if (clkdm->usecount == 0) {
pwrdm_unlock(clkdm->pwrdm.ptr);
WARN_ON(1); /* underflow */
return -ERANGE;
}
if (atomic_dec_return(&clkdm->usecount) > 0) {
spin_unlock_irqrestore(&clkdm->lock, flags);
clkdm->usecount--;
if (clkdm->usecount > 0) {
pwrdm_unlock(clkdm->pwrdm.ptr);
return 0;
}
arch_clkdm->clkdm_clk_disable(clkdm);
pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
pwrdm_state_switch_nolock(clkdm->pwrdm.ptr);
pwrdm_unlock(clkdm->pwrdm.ptr);
pr_debug("clockdomain: %s: disabled\n", clkdm->name);

17
arch/arm/mach-omap2/clockdomain.h
View File

@ -15,7 +15,6 @@
#define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAIN_H
#include <linux/init.h>
#include <linux/spinlock.h>
#include "powerdomain.h"
#include "clock.h"
@ -92,8 +91,8 @@ struct clkdm_autodep {
struct clkdm_dep {
const char *clkdm_name;
struct clockdomain *clkdm;
atomic_t wkdep_usecount;
atomic_t sleepdep_usecount;
s16 wkdep_usecount;
s16 sleepdep_usecount;
};
/* Possible flags for struct clockdomain._flags */
@ -137,9 +136,8 @@ struct clockdomain {
const u16 clkdm_offs;
struct clkdm_dep *wkdep_srcs;
struct clkdm_dep *sleepdep_srcs;
atomic_t usecount;
int usecount;
struct list_head node;
spinlock_t lock;
};
/**
@ -196,12 +194,16 @@ int clkdm_del_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
int clkdm_read_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm);
void clkdm_allow_idle_nolock(struct clockdomain *clkdm);
void clkdm_allow_idle(struct clockdomain *clkdm);
void clkdm_deny_idle_nolock(struct clockdomain *clkdm);
void clkdm_deny_idle(struct clockdomain *clkdm);
bool clkdm_in_hwsup(struct clockdomain *clkdm);
bool clkdm_missing_idle_reporting(struct clockdomain *clkdm);
int clkdm_wakeup_nolock(struct clockdomain *clkdm);
int clkdm_wakeup(struct clockdomain *clkdm);
int clkdm_sleep_nolock(struct clockdomain *clkdm);
int clkdm_sleep(struct clockdomain *clkdm);
int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk);
@ -214,8 +216,9 @@ extern void __init omap243x_clockdomains_init(void);
extern void __init omap3xxx_clockdomains_init(void);
extern void __init am33xx_clockdomains_init(void);
extern void __init omap44xx_clockdomains_init(void);
extern void _clkdm_add_autodeps(struct clockdomain *clkdm);
extern void _clkdm_del_autodeps(struct clockdomain *clkdm);
extern void clkdm_add_autodeps(struct clockdomain *clkdm);
extern void clkdm_del_autodeps(struct clockdomain *clkdm);
extern struct clkdm_ops omap2_clkdm_operations;
extern struct clkdm_ops omap3_clkdm_operations;

33
arch/arm/mach-omap2/cm2xxx.c
View File

@ -273,9 +273,6 @@ int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
static void omap2xxx_clkdm_allow_idle(struct clockdomain *clkdm)
{
if (atomic_read(&clkdm->usecount) > 0)
_clkdm_add_autodeps(clkdm);
omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
}
@ -284,9 +281,6 @@ static void omap2xxx_clkdm_deny_idle(struct clockdomain *clkdm)
{
omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
if (atomic_read(&clkdm->usecount) > 0)
_clkdm_del_autodeps(clkdm);
}
static int omap2xxx_clkdm_clk_enable(struct clockdomain *clkdm)
@ -298,18 +292,8 @@ static int omap2xxx_clkdm_clk_enable(struct clockdomain *clkdm)
hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
if (hwsup) {
/* Disable HW transitions when we are changing deps */
omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
_clkdm_add_autodeps(clkdm);
omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
} else {
if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
omap2xxx_clkdm_wakeup(clkdm);
}
if (!hwsup && clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
omap2xxx_clkdm_wakeup(clkdm);
return 0;
}
@ -324,17 +308,8 @@ static int omap2xxx_clkdm_clk_disable(struct clockdomain *clkdm)
hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
if (hwsup) {
/* Disable HW transitions when we are changing deps */
omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
_clkdm_del_autodeps(clkdm);
omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
} else {
if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
omap2xxx_clkdm_sleep(clkdm);
}
if (!hwsup && clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
omap2xxx_clkdm_sleep(clkdm);
return 0;
}

14
arch/arm/mach-omap2/cm3xxx.c
View File

@ -186,7 +186,7 @@ static int omap3xxx_clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
continue; /* only happens if data is erroneous */
mask |= 1 << cd->clkdm->dep_bit;
atomic_set(&cd->sleepdep_usecount, 0);
cd->sleepdep_usecount = 0;
}
omap2_cm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
OMAP3430_CM_SLEEPDEP);
@ -209,8 +209,8 @@ static int omap3xxx_clkdm_wakeup(struct clockdomain *clkdm)
static void omap3xxx_clkdm_allow_idle(struct clockdomain *clkdm)
{
if (atomic_read(&clkdm->usecount) > 0)
_clkdm_add_autodeps(clkdm);
if (clkdm->usecount > 0)
clkdm_add_autodeps(clkdm);
omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
@ -221,8 +221,8 @@ static void omap3xxx_clkdm_deny_idle(struct clockdomain *clkdm)
omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
if (atomic_read(&clkdm->usecount) > 0)
_clkdm_del_autodeps(clkdm);
if (clkdm->usecount > 0)
clkdm_del_autodeps(clkdm);
}
static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm)
@ -250,7 +250,7 @@ static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm)
/* Disable HW transitions when we are changing deps */
omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
_clkdm_add_autodeps(clkdm);
clkdm_add_autodeps(clkdm);
omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
} else {
@ -287,7 +287,7 @@ static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm)
/* Disable HW transitions when we are changing deps */
omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
_clkdm_del_autodeps(clkdm);
clkdm_del_autodeps(clkdm);
omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
} else {

2
arch/arm/mach-omap2/cminst44xx.c
View File

@ -393,7 +393,7 @@ static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
continue; /* only happens if data is erroneous */
mask |= 1 << cd->clkdm->dep_bit;
atomic_set(&cd->wkdep_usecount, 0);
cd->wkdep_usecount = 0;
}
omap4_cminst_clear_inst_reg_bits(mask, clkdm->prcm_partition,

79
arch/arm/mach-omap2/cpuidle34xx.c
View File

@ -36,40 +36,66 @@
/* Mach specific information to be recorded in the C-state driver_data */
struct omap3_idle_statedata {
u32 mpu_state;
u32 core_state;
u8 mpu_state;
u8 core_state;
u8 per_min_state;
u8 flags;
};
static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd;
/*
* Possible flag bits for struct omap3_idle_statedata.flags:
*
* OMAP_CPUIDLE_CX_NO_CLKDM_IDLE: don't allow the MPU clockdomain to go
* inactive. This in turn prevents the MPU DPLL from entering autoidle
* mode, so wakeup latency is greatly reduced, at the cost of additional
* energy consumption. This also prevents the CORE clockdomain from
* entering idle.
*/
#define OMAP_CPUIDLE_CX_NO_CLKDM_IDLE BIT(0)
/*
* Prevent PER OFF if CORE is not in RETention or OFF as this would
* disable PER wakeups completely.
*/
static struct omap3_idle_statedata omap3_idle_data[] = {
{
.mpu_state = PWRDM_POWER_ON,
.core_state = PWRDM_POWER_ON,
/* In C1 do not allow PER state lower than CORE state */
.per_min_state = PWRDM_POWER_ON,
.flags = OMAP_CPUIDLE_CX_NO_CLKDM_IDLE,
},
{
.mpu_state = PWRDM_POWER_ON,
.core_state = PWRDM_POWER_ON,
.per_min_state = PWRDM_POWER_RET,
},
{
.mpu_state = PWRDM_POWER_RET,
.core_state = PWRDM_POWER_ON,
.per_min_state = PWRDM_POWER_RET,
},
{
.mpu_state = PWRDM_POWER_OFF,
.core_state = PWRDM_POWER_ON,
.per_min_state = PWRDM_POWER_RET,
},
{
.mpu_state = PWRDM_POWER_RET,
.core_state = PWRDM_POWER_RET,
.per_min_state = PWRDM_POWER_OFF,
},
{
.mpu_state = PWRDM_POWER_OFF,
.core_state = PWRDM_POWER_RET,
.per_min_state = PWRDM_POWER_OFF,
},
{
.mpu_state = PWRDM_POWER_OFF,
.core_state = PWRDM_POWER_OFF,
.per_min_state = PWRDM_POWER_OFF,
},
};
@ -80,27 +106,25 @@ static int __omap3_enter_idle(struct cpuidle_device *dev,
int index)
{
struct omap3_idle_statedata *cx = &omap3_idle_data[index];
u32 mpu_state = cx->mpu_state, core_state = cx->core_state;
local_fiq_disable();
pwrdm_set_next_pwrst(mpu_pd, mpu_state);
pwrdm_set_next_pwrst(core_pd, core_state);
if (omap_irq_pending() || need_resched())
goto return_sleep_time;
/* Deny idle for C1 */
if (index == 0) {
if (cx->flags & OMAP_CPUIDLE_CX_NO_CLKDM_IDLE) {
clkdm_deny_idle(mpu_pd->pwrdm_clkdms[0]);
clkdm_deny_idle(core_pd->pwrdm_clkdms[0]);
} else {
pwrdm_set_next_pwrst(mpu_pd, cx->mpu_state);
pwrdm_set_next_pwrst(core_pd, cx->core_state);
}
/*
* Call idle CPU PM enter notifier chain so that
* VFP context is saved.
*/
if (mpu_state == PWRDM_POWER_OFF)
if (cx->mpu_state == PWRDM_POWER_OFF)
cpu_pm_enter();
/* Execute ARM wfi */
@ -110,17 +134,15 @@ static int __omap3_enter_idle(struct cpuidle_device *dev,
* Call idle CPU PM enter notifier chain to restore
* VFP context.
*/
if (pwrdm_read_prev_pwrst(mpu_pd) == PWRDM_POWER_OFF)
if (cx->mpu_state == PWRDM_POWER_OFF &&
pwrdm_read_prev_pwrst(mpu_pd) == PWRDM_POWER_OFF)
cpu_pm_exit();
/* Re-allow idle for C1 */
if (index == 0) {
if (cx->flags & OMAP_CPUIDLE_CX_NO_CLKDM_IDLE)
clkdm_allow_idle(mpu_pd->pwrdm_clkdms[0]);
clkdm_allow_idle(core_pd->pwrdm_clkdms[0]);
}
return_sleep_time:
local_fiq_enable();
return index;
@ -185,7 +207,7 @@ static int next_valid_state(struct cpuidle_device *dev,
* Start search from the next (lower) state.
*/
for (idx = index - 1; idx >= 0; idx--) {
cx = &omap3_idle_data[idx];
cx = &omap3_idle_data[idx];
if ((cx->mpu_state >= mpu_deepest_state) &&
(cx->core_state >= core_deepest_state)) {
next_index = idx;
@ -209,10 +231,9 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
int new_state_idx;
u32 core_next_state, per_next_state = 0, per_saved_state = 0;
int new_state_idx, ret;
u8 per_next_state, per_saved_state;
struct omap3_idle_statedata *cx;
int ret;
/*
* Use only C1 if CAM is active.
@ -233,25 +254,13 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
/* Program PER state */
cx = &omap3_idle_data[new_state_idx];
core_next_state = cx->core_state;
per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd);
if (new_state_idx == 0) {
/* In C1 do not allow PER state lower than CORE state */
if (per_next_state < core_next_state)
per_next_state = core_next_state;
} else {
/*
* Prevent PER OFF if CORE is not in RETention or OFF as this
* would disable PER wakeups completely.
*/
if ((per_next_state == PWRDM_POWER_OFF) &&
(core_next_state > PWRDM_POWER_RET))
per_next_state = PWRDM_POWER_RET;
}
/* Are we changing PER target state? */
if (per_next_state != per_saved_state)
per_next_state = pwrdm_read_next_pwrst(per_pd);
per_saved_state = per_next_state;
if (per_next_state < cx->per_min_state) {
per_next_state = cx->per_min_state;
pwrdm_set_next_pwrst(per_pd, per_next_state);
}
ret = omap3_enter_idle(dev, drv, new_state_idx);

25
arch/arm/mach-omap2/devices.c
View File

@ -62,8 +62,7 @@ static int __init omap3_l3_init(void)
if (!oh)
pr_err("could not look up %s\n", oh_name);
pdev = omap_device_build("omap_l3_smx", 0, oh, NULL, 0,
NULL, 0, 0);
pdev = omap_device_build("omap_l3_smx", 0, oh, NULL, 0);
WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
@ -97,8 +96,7 @@ static int __init omap4_l3_init(void)
pr_err("could not look up %s\n", oh_name);
}
pdev = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL,
0, NULL, 0, 0);
pdev = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL, 0);
WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
@ -317,7 +315,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data
keypad_data = sdp4430_keypad_data;
pdev = omap_device_build(name, id, oh, keypad_data,
sizeof(struct omap4_keypad_platform_data), NULL, 0, 0);
sizeof(struct omap4_keypad_platform_data));
if (IS_ERR(pdev)) {
WARN(1, "Can't build omap_device for %s:%s.\n",
@ -341,7 +339,7 @@ static inline void __init omap_init_mbox(void)
return;
}
pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0, NULL, 0, 0);
pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0);
WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n",
__func__, PTR_ERR(pdev));
}
@ -381,7 +379,7 @@ static void __init omap_init_mcpdm(void)
return;
}
pdev = omap_device_build("omap-mcpdm", -1, oh, NULL, 0, NULL, 0, 0);
pdev = omap_device_build("omap-mcpdm", -1, oh, NULL, 0);
WARN(IS_ERR(pdev), "Can't build omap_device for omap-mcpdm.\n");
}
#else
@ -402,7 +400,7 @@ static void __init omap_init_dmic(void)
return;
}
pdev = omap_device_build("omap-dmic", -1, oh, NULL, 0, NULL, 0, 0);
pdev = omap_device_build("omap-dmic", -1, oh, NULL, 0);
WARN(IS_ERR(pdev), "Can't build omap_device for omap-dmic.\n");
}
#else
@ -428,8 +426,7 @@ static void __init omap_init_hdmi_audio(void)
return;
}
pdev = omap_device_build("omap-hdmi-audio-dai",
-1, oh, NULL, 0, NULL, 0, 0);
pdev = omap_device_build("omap-hdmi-audio-dai", -1, oh, NULL, 0, 0);
WARN(IS_ERR(pdev),
"Can't build omap_device for omap-hdmi-audio-dai.\n");
@ -473,8 +470,7 @@ static int __init omap_mcspi_init(struct omap_hwmod *oh, void *unused)
}
spi_num++;
pdev = omap_device_build(name, spi_num, oh, pdata,
sizeof(*pdata), NULL, 0, 0);
pdev = omap_device_build(name, spi_num, oh, pdata, sizeof(*pdata));
WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s\n",
name, oh->name);
kfree(pdata);
@ -504,7 +500,7 @@ static void omap_init_rng(void)
if (!oh)
return;
pdev = omap_device_build("omap_rng", -1, oh, NULL, 0, NULL, 0, 0);
pdev = omap_device_build("omap_rng", -1, oh, NULL, 0);
WARN(IS_ERR(pdev), "Can't build omap_device for omap_rng\n");
}
@ -733,8 +729,7 @@ static void __init omap_init_ocp2scp(void)
pdata->dev_cnt = dev_cnt;
pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(*pdata), NULL,
0, false);
pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(*pdata));
if (IS_ERR(pdev)) {
pr_err("Could not build omap_device for %s %s\n",
name, oh_name);

2
arch/arm/mach-omap2/display.c
View File

@ -226,7 +226,7 @@ static struct platform_device *create_dss_pdev(const char *pdev_name,
dev_set_name(&pdev->dev, "%s", pdev->name);
ohs[0] = oh;
od = omap_device_alloc(pdev, ohs, 1, NULL, 0);
od = omap_device_alloc(pdev, ohs, 1);
if (IS_ERR(od)) {
pr_err("Could not alloc omap_device for %s\n", pdev_name);
r = -ENOMEM;

Some files were not shown because too many files have changed in this diff Show More