Input: adp5588-keys - export unused GPIO pins
This patch allows exporting GPIO pins not used by the keypad itself to be accessible from elsewhere. Signed-off-by: Xiaolong Chen <xiao-long.chen@motorola.com> Signed-off-by: Yuanbo Ye <yuan-bo.ye@motorola.com> Signed-off-by: Tao Hu <taohu@motorola.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
This commit is contained in:
parent
f1cba532e8
commit
ba9f507a1b
|
@ -19,6 +19,7 @@
|
||||||
#include <linux/platform_device.h>
|
#include <linux/platform_device.h>
|
||||||
#include <linux/input.h>
|
#include <linux/input.h>
|
||||||
#include <linux/i2c.h>
|
#include <linux/i2c.h>
|
||||||
|
#include <linux/gpio.h>
|
||||||
#include <linux/slab.h>
|
#include <linux/slab.h>
|
||||||
|
|
||||||
#include <linux/i2c/adp5588.h>
|
#include <linux/i2c/adp5588.h>
|
||||||
|
@ -54,6 +55,10 @@
|
||||||
|
|
||||||
#define KEYP_MAX_EVENT 10
|
#define KEYP_MAX_EVENT 10
|
||||||
|
|
||||||
|
#define MAXGPIO 18
|
||||||
|
#define ADP_BANK(offs) ((offs) >> 3)
|
||||||
|
#define ADP_BIT(offs) (1u << ((offs) & 0x7))
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* Early pre 4.0 Silicon required to delay readout by at least 25ms,
|
* Early pre 4.0 Silicon required to delay readout by at least 25ms,
|
||||||
* since the Event Counter Register updated 25ms after the interrupt
|
* since the Event Counter Register updated 25ms after the interrupt
|
||||||
|
@ -69,6 +74,14 @@ struct adp5588_kpad {
|
||||||
unsigned short keycode[ADP5588_KEYMAPSIZE];
|
unsigned short keycode[ADP5588_KEYMAPSIZE];
|
||||||
const struct adp5588_gpi_map *gpimap;
|
const struct adp5588_gpi_map *gpimap;
|
||||||
unsigned short gpimapsize;
|
unsigned short gpimapsize;
|
||||||
|
#ifdef CONFIG_GPIOLIB
|
||||||
|
unsigned char gpiomap[MAXGPIO];
|
||||||
|
bool export_gpio;
|
||||||
|
struct gpio_chip gc;
|
||||||
|
struct mutex gpio_lock; /* Protect cached dir, dat_out */
|
||||||
|
u8 dat_out[3];
|
||||||
|
u8 dir[3];
|
||||||
|
#endif
|
||||||
};
|
};
|
||||||
|
|
||||||
static int adp5588_read(struct i2c_client *client, u8 reg)
|
static int adp5588_read(struct i2c_client *client, u8 reg)
|
||||||
|
@ -86,6 +99,183 @@ static int adp5588_write(struct i2c_client *client, u8 reg, u8 val)
|
||||||
return i2c_smbus_write_byte_data(client, reg, val);
|
return i2c_smbus_write_byte_data(client, reg, val);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
#ifdef CONFIG_GPIOLIB
|
||||||
|
static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
|
||||||
|
{
|
||||||
|
struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
|
||||||
|
unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
|
||||||
|
unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
|
||||||
|
|
||||||
|
return !!(adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank) & bit);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void adp5588_gpio_set_value(struct gpio_chip *chip,
|
||||||
|
unsigned off, int val)
|
||||||
|
{
|
||||||
|
struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
|
||||||
|
unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
|
||||||
|
unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
|
||||||
|
|
||||||
|
mutex_lock(&kpad->gpio_lock);
|
||||||
|
|
||||||
|
if (val)
|
||||||
|
kpad->dat_out[bank] |= bit;
|
||||||
|
else
|
||||||
|
kpad->dat_out[bank] &= ~bit;
|
||||||
|
|
||||||
|
adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
|
||||||
|
kpad->dat_out[bank]);
|
||||||
|
|
||||||
|
mutex_unlock(&kpad->gpio_lock);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off)
|
||||||
|
{
|
||||||
|
struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
|
||||||
|
unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
|
||||||
|
unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
mutex_lock(&kpad->gpio_lock);
|
||||||
|
|
||||||
|
kpad->dir[bank] &= ~bit;
|
||||||
|
ret = adp5588_write(kpad->client, GPIO_DIR1 + bank, kpad->dir[bank]);
|
||||||
|
|
||||||
|
mutex_unlock(&kpad->gpio_lock);
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int adp5588_gpio_direction_output(struct gpio_chip *chip,
|
||||||
|
unsigned off, int val)
|
||||||
|
{
|
||||||
|
struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
|
||||||
|
unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
|
||||||
|
unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
mutex_lock(&kpad->gpio_lock);
|
||||||
|
|
||||||
|
kpad->dir[bank] |= bit;
|
||||||
|
|
||||||
|
if (val)
|
||||||
|
kpad->dat_out[bank] |= bit;
|
||||||
|
else
|
||||||
|
kpad->dat_out[bank] &= ~bit;
|
||||||
|
|
||||||
|
ret = adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
|
||||||
|
kpad->dat_out[bank]);
|
||||||
|
ret |= adp5588_write(kpad->client, GPIO_DIR1 + bank,
|
||||||
|
kpad->dir[bank]);
|
||||||
|
|
||||||
|
mutex_unlock(&kpad->gpio_lock);
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int __devinit adp5588_gpio_add(struct device *dev)
|
||||||
|
{
|
||||||
|
struct adp5588_kpad *kpad = dev_get_drvdata(dev);
|
||||||
|
const struct adp5588_kpad_platform_data *pdata = dev->platform_data;
|
||||||
|
const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
|
||||||
|
int i, error;
|
||||||
|
|
||||||
|
if (gpio_data) {
|
||||||
|
int j = 0;
|
||||||
|
bool pin_used[MAXGPIO];
|
||||||
|
|
||||||
|
for (i = 0; i < pdata->rows; i++)
|
||||||
|
pin_used[i] = true;
|
||||||
|
|
||||||
|
for (i = 0; i < pdata->cols; i++)
|
||||||
|
pin_used[i + GPI_PIN_COL_BASE - GPI_PIN_BASE] = true;
|
||||||
|
|
||||||
|
for (i = 0; i < kpad->gpimapsize; i++)
|
||||||
|
pin_used[kpad->gpimap[i].pin - GPI_PIN_BASE] = true;
|
||||||
|
|
||||||
|
for (i = 0; i < MAXGPIO; i++) {
|
||||||
|
if (!pin_used[i])
|
||||||
|
kpad->gpiomap[j++] = i;
|
||||||
|
}
|
||||||
|
kpad->gc.ngpio = j;
|
||||||
|
|
||||||
|
if (kpad->gc.ngpio)
|
||||||
|
kpad->export_gpio = true;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (!kpad->export_gpio) {
|
||||||
|
dev_info(dev, "No unused gpios left to export\n");
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
kpad->gc.direction_input = adp5588_gpio_direction_input;
|
||||||
|
kpad->gc.direction_output = adp5588_gpio_direction_output;
|
||||||
|
kpad->gc.get = adp5588_gpio_get_value;
|
||||||
|
kpad->gc.set = adp5588_gpio_set_value;
|
||||||
|
kpad->gc.can_sleep = 1;
|
||||||
|
|
||||||
|
kpad->gc.base = gpio_data->gpio_start;
|
||||||
|
kpad->gc.label = kpad->client->name;
|
||||||
|
kpad->gc.owner = THIS_MODULE;
|
||||||
|
|
||||||
|
mutex_init(&kpad->gpio_lock);
|
||||||
|
|
||||||
|
error = gpiochip_add(&kpad->gc);
|
||||||
|
if (error) {
|
||||||
|
dev_err(dev, "gpiochip_add failed, err: %d\n", error);
|
||||||
|
return error;
|
||||||
|
}
|
||||||
|
|
||||||
|
for (i = 0; i <= ADP_BANK(MAXGPIO); i++) {
|
||||||
|
kpad->dat_out[i] = adp5588_read(kpad->client,
|
||||||
|
GPIO_DAT_OUT1 + i);
|
||||||
|
kpad->dir[i] = adp5588_read(kpad->client, GPIO_DIR1 + i);
|
||||||
|
}
|
||||||
|
|
||||||
|
if (gpio_data->setup) {
|
||||||
|
error = gpio_data->setup(kpad->client,
|
||||||
|
kpad->gc.base, kpad->gc.ngpio,
|
||||||
|
gpio_data->context);
|
||||||
|
if (error)
|
||||||
|
dev_warn(dev, "setup failed, %d\n", error);
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void __devexit adp5588_gpio_remove(struct device *dev)
|
||||||
|
{
|
||||||
|
struct adp5588_kpad *kpad = dev_get_drvdata(dev);
|
||||||
|
const struct adp5588_kpad_platform_data *pdata = dev->platform_data;
|
||||||
|
const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
|
||||||
|
int error;
|
||||||
|
|
||||||
|
if (!kpad->export_gpio)
|
||||||
|
return;
|
||||||
|
|
||||||
|
if (gpio_data->teardown) {
|
||||||
|
error = gpio_data->teardown(kpad->client,
|
||||||
|
kpad->gc.base, kpad->gc.ngpio,
|
||||||
|
gpio_data->context);
|
||||||
|
if (error)
|
||||||
|
dev_warn(dev, "teardown failed %d\n", error);
|
||||||
|
}
|
||||||
|
|
||||||
|
error = gpiochip_remove(&kpad->gc);
|
||||||
|
if (error)
|
||||||
|
dev_warn(dev, "gpiochip_remove failed %d\n", error);
|
||||||
|
}
|
||||||
|
#else
|
||||||
|
static inline int adp5588_gpio_add(struct device *dev)
|
||||||
|
{
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline void adp5588_gpio_remove(struct device *dev)
|
||||||
|
{
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
static void adp5588_report_events(struct adp5588_kpad *kpad, int ev_cnt)
|
static void adp5588_report_events(struct adp5588_kpad *kpad, int ev_cnt)
|
||||||
{
|
{
|
||||||
int i, j;
|
int i, j;
|
||||||
|
@ -150,7 +340,8 @@ static irqreturn_t adp5588_irq(int irq, void *handle)
|
||||||
|
|
||||||
static int __devinit adp5588_setup(struct i2c_client *client)
|
static int __devinit adp5588_setup(struct i2c_client *client)
|
||||||
{
|
{
|
||||||
struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
|
const struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
|
||||||
|
const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
|
||||||
int i, ret;
|
int i, ret;
|
||||||
unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0;
|
unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0;
|
||||||
|
|
||||||
|
@ -184,6 +375,15 @@ static int __devinit adp5588_setup(struct i2c_client *client)
|
||||||
ret |= adp5588_write(client, GPI_EM3, evt_mode3);
|
ret |= adp5588_write(client, GPI_EM3, evt_mode3);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
if (gpio_data) {
|
||||||
|
for (i = 0; i <= ADP_BANK(MAXGPIO); i++) {
|
||||||
|
int pull_mask = gpio_data->pullup_dis_mask;
|
||||||
|
|
||||||
|
ret |= adp5588_write(client, GPIO_PULL1 + i,
|
||||||
|
(pull_mask >> (8 * i)) & 0xFF);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
ret |= adp5588_write(client, INT_STAT, CMP2_INT | CMP1_INT |
|
ret |= adp5588_write(client, INT_STAT, CMP2_INT | CMP1_INT |
|
||||||
OVR_FLOW_INT | K_LCK_INT |
|
OVR_FLOW_INT | K_LCK_INT |
|
||||||
GPI_INT | KE_INT); /* Status is W1C */
|
GPI_INT | KE_INT); /* Status is W1C */
|
||||||
|
@ -240,7 +440,7 @@ static int __devinit adp5588_probe(struct i2c_client *client,
|
||||||
const struct i2c_device_id *id)
|
const struct i2c_device_id *id)
|
||||||
{
|
{
|
||||||
struct adp5588_kpad *kpad;
|
struct adp5588_kpad *kpad;
|
||||||
struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
|
const struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
|
||||||
struct input_dev *input;
|
struct input_dev *input;
|
||||||
unsigned int revid;
|
unsigned int revid;
|
||||||
int ret, i;
|
int ret, i;
|
||||||
|
@ -381,6 +581,10 @@ static int __devinit adp5588_probe(struct i2c_client *client,
|
||||||
if (kpad->gpimapsize)
|
if (kpad->gpimapsize)
|
||||||
adp5588_report_switch_state(kpad);
|
adp5588_report_switch_state(kpad);
|
||||||
|
|
||||||
|
error = adp5588_gpio_add(&client->dev);
|
||||||
|
if (error)
|
||||||
|
goto err_free_irq;
|
||||||
|
|
||||||
device_init_wakeup(&client->dev, 1);
|
device_init_wakeup(&client->dev, 1);
|
||||||
i2c_set_clientdata(client, kpad);
|
i2c_set_clientdata(client, kpad);
|
||||||
|
|
||||||
|
@ -407,6 +611,7 @@ static int __devexit adp5588_remove(struct i2c_client *client)
|
||||||
free_irq(client->irq, kpad);
|
free_irq(client->irq, kpad);
|
||||||
cancel_delayed_work_sync(&kpad->work);
|
cancel_delayed_work_sync(&kpad->work);
|
||||||
input_unregister_device(kpad->input);
|
input_unregister_device(kpad->input);
|
||||||
|
adp5588_gpio_remove(&client->dev);
|
||||||
kfree(kpad);
|
kfree(kpad);
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
|
|
|
@ -123,6 +123,7 @@ struct adp5588_kpad_platform_data {
|
||||||
unsigned short unlock_key2; /* Unlock Key 2 */
|
unsigned short unlock_key2; /* Unlock Key 2 */
|
||||||
const struct adp5588_gpi_map *gpimap;
|
const struct adp5588_gpi_map *gpimap;
|
||||||
unsigned short gpimapsize;
|
unsigned short gpimapsize;
|
||||||
|
const struct adp5588_gpio_platform_data *gpio_data;
|
||||||
};
|
};
|
||||||
|
|
||||||
struct adp5588_gpio_platform_data {
|
struct adp5588_gpio_platform_data {
|
||||||
|
|
Loading…
Reference in New Issue