[ARM] 3962/1: AT91: Support for Atmel AT91SAM9260-EK board
This patch adds support for the Atmel AT91SAM9260-EK board. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Andrew Victor
Russell King
parent
05043d0804
commit
b85a891403
|
|
@ -0,0 +1,950 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.19-rc6
|
||||
# Fri Nov 17 18:42:21 2006
|
||||
#
|
||||
CONFIG_ARM=y
|
||||
# CONFIG_GENERIC_TIME is not set
|
||||
CONFIG_MMU=y
|
||||
CONFIG_GENERIC_HARDIRQS=y
|
||||
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
||||
CONFIG_HARDIRQS_SW_RESEND=y
|
||||
CONFIG_GENERIC_IRQ_PROBE=y
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_GENERIC_HWEIGHT=y
|
||||
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||
CONFIG_VECTORS_BASE=0xffff0000
|
||||
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
||||
|
||||
#
|
||||
# Code maturity level options
|
||||
#
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||
|
||||
#
|
||||
# General setup
|
||||
#
|
||||
CONFIG_LOCALVERSION=""
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
# CONFIG_IPC_NS is not set
|
||||
# CONFIG_POSIX_MQUEUE is not set
|
||||
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||
# CONFIG_TASKSTATS is not set
|
||||
# CONFIG_UTS_NS is not set
|
||||
# CONFIG_AUDIT is not set
|
||||
# CONFIG_IKCONFIG is not set
|
||||
# CONFIG_RELAY is not set
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_SYSCTL=y
|
||||
# CONFIG_EMBEDDED is not set
|
||||
CONFIG_UID16=y
|
||||
CONFIG_SYSCTL_SYSCALL=y
|
||||
CONFIG_KALLSYMS=y
|
||||
# CONFIG_KALLSYMS_ALL is not set
|
||||
# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
||||
CONFIG_HOTPLUG=y
|
||||
CONFIG_PRINTK=y
|
||||
CONFIG_BUG=y
|
||||
CONFIG_ELF_CORE=y
|
||||
CONFIG_BASE_FULL=y
|
||||
CONFIG_FUTEX=y
|
||||
CONFIG_EPOLL=y
|
||||
CONFIG_SHMEM=y
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_VM_EVENT_COUNTERS=y
|
||||
CONFIG_RT_MUTEXES=y
|
||||
# CONFIG_TINY_SHMEM is not set
|
||||
CONFIG_BASE_SMALL=0
|
||||
# CONFIG_SLOB is not set
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
#
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_MODULE_FORCE_UNLOAD is not set
|
||||
# CONFIG_MODVERSIONS is not set
|
||||
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
||||
CONFIG_KMOD=y
|
||||
|
||||
#
|
||||
# Block layer
|
||||
#
|
||||
CONFIG_BLOCK=y
|
||||
# CONFIG_BLK_DEV_IO_TRACE is not set
|
||||
|
||||
#
|
||||
# IO Schedulers
|
||||
#
|
||||
CONFIG_IOSCHED_NOOP=y
|
||||
CONFIG_IOSCHED_AS=y
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_DEFAULT_AS=y
|
||||
# CONFIG_DEFAULT_DEADLINE is not set
|
||||
# CONFIG_DEFAULT_CFQ is not set
|
||||
# CONFIG_DEFAULT_NOOP is not set
|
||||
CONFIG_DEFAULT_IOSCHED="anticipatory"
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_AAEC2000 is not set
|
||||
# CONFIG_ARCH_INTEGRATOR is not set
|
||||
# CONFIG_ARCH_REALVIEW is not set
|
||||
# CONFIG_ARCH_VERSATILE is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
# CONFIG_ARCH_CLPS7500 is not set
|
||||
# CONFIG_ARCH_CLPS711X is not set
|
||||
# CONFIG_ARCH_CO285 is not set
|
||||
# CONFIG_ARCH_EBSA110 is not set
|
||||
# CONFIG_ARCH_EP93XX is not set
|
||||
# CONFIG_ARCH_FOOTBRIDGE is not set
|
||||
# CONFIG_ARCH_NETX is not set
|
||||
# CONFIG_ARCH_H720X is not set
|
||||
# CONFIG_ARCH_IMX is not set
|
||||
# CONFIG_ARCH_IOP32X is not set
|
||||
# CONFIG_ARCH_IOP33X is not set
|
||||
# CONFIG_ARCH_IXP4XX is not set
|
||||
# CONFIG_ARCH_IXP2000 is not set
|
||||
# CONFIG_ARCH_IXP23XX is not set
|
||||
# CONFIG_ARCH_L7200 is not set
|
||||
# CONFIG_ARCH_PNX4008 is not set
|
||||
# CONFIG_ARCH_PXA is not set
|
||||
# CONFIG_ARCH_RPC is not set
|
||||
# CONFIG_ARCH_SA1100 is not set
|
||||
# CONFIG_ARCH_S3C2410 is not set
|
||||
# CONFIG_ARCH_SHARK is not set
|
||||
# CONFIG_ARCH_LH7A40X is not set
|
||||
# CONFIG_ARCH_OMAP is not set
|
||||
|
||||
#
|
||||
# Atmel AT91 System-on-Chip
|
||||
#
|
||||
# CONFIG_ARCH_AT91RM9200 is not set
|
||||
CONFIG_ARCH_AT91SAM9260=y
|
||||
# CONFIG_ARCH_AT91SAM9261 is not set
|
||||
|
||||
#
|
||||
# AT91SAM9260 Board Type
|
||||
#
|
||||
CONFIG_MACH_AT91SAM9260EK=y
|
||||
|
||||
#
|
||||
# AT91 Board Options
|
||||
#
|
||||
# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
|
||||
|
||||
#
|
||||
# AT91 Feature Selections
|
||||
#
|
||||
# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
|
||||
|
||||
#
|
||||
# Processor Type
|
||||
#
|
||||
CONFIG_CPU_32=y
|
||||
CONFIG_CPU_ARM926T=y
|
||||
CONFIG_CPU_32v5=y
|
||||
CONFIG_CPU_ABRT_EV5TJ=y
|
||||
CONFIG_CPU_CACHE_VIVT=y
|
||||
CONFIG_CPU_COPY_V4WB=y
|
||||
CONFIG_CPU_TLB_V4WBI=y
|
||||
CONFIG_CPU_CP15=y
|
||||
CONFIG_CPU_CP15_MMU=y
|
||||
|
||||
#
|
||||
# Processor Features
|
||||
#
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
# CONFIG_CPU_ICACHE_DISABLE is not set
|
||||
# CONFIG_CPU_DCACHE_DISABLE is not set
|
||||
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
|
||||
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
|
||||
|
||||
#
|
||||
# Bus support
|
||||
#
|
||||
|
||||
#
|
||||
# PCCARD (PCMCIA/CardBus) support
|
||||
#
|
||||
# CONFIG_PCCARD is not set
|
||||
|
||||
#
|
||||
# Kernel Features
|
||||
#
|
||||
# CONFIG_PREEMPT is not set
|
||||
# CONFIG_NO_IDLE_HZ is not set
|
||||
CONFIG_HZ=100
|
||||
# CONFIG_AEABI is not set
|
||||
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
|
||||
CONFIG_SELECT_MEMORY_MODEL=y
|
||||
CONFIG_FLATMEM_MANUAL=y
|
||||
# CONFIG_DISCONTIGMEM_MANUAL is not set
|
||||
# CONFIG_SPARSEMEM_MANUAL is not set
|
||||
CONFIG_FLATMEM=y
|
||||
CONFIG_FLAT_NODE_MEM_MAP=y
|
||||
# CONFIG_SPARSEMEM_STATIC is not set
|
||||
CONFIG_SPLIT_PTLOCK_CPUS=4096
|
||||
# CONFIG_RESOURCES_64BIT is not set
|
||||
# CONFIG_LEDS is not set
|
||||
CONFIG_ALIGNMENT_TRAP=y
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
|
||||
# CONFIG_XIP_KERNEL is not set
|
||||
|
||||
#
|
||||
# Floating point emulation
|
||||
#
|
||||
|
||||
#
|
||||
# At least one emulation must be selected
|
||||
#
|
||||
CONFIG_FPE_NWFPE=y
|
||||
# CONFIG_FPE_NWFPE_XP is not set
|
||||
# CONFIG_FPE_FASTFPE is not set
|
||||
# CONFIG_VFP is not set
|
||||
|
||||
#
|
||||
# Userspace binary formats
|
||||
#
|
||||
CONFIG_BINFMT_ELF=y
|
||||
# CONFIG_BINFMT_AOUT is not set
|
||||
# CONFIG_BINFMT_MISC is not set
|
||||
# CONFIG_ARTHUR is not set
|
||||
|
||||
#
|
||||
# Power management options
|
||||
#
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_APM is not set
|
||||
|
||||
#
|
||||
# Networking
|
||||
#
|
||||
CONFIG_NET=y
|
||||
|
||||
#
|
||||
# Networking options
|
||||
#
|
||||
# CONFIG_NETDEBUG is not set
|
||||
CONFIG_PACKET=y
|
||||
# CONFIG_PACKET_MMAP is not set
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_XFRM=y
|
||||
# CONFIG_XFRM_USER is not set
|
||||
# CONFIG_XFRM_SUB_POLICY is not set
|
||||
# CONFIG_NET_KEY is not set
|
||||
CONFIG_INET=y
|
||||
# CONFIG_IP_MULTICAST is not set
|
||||
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||
CONFIG_IP_FIB_HASH=y
|
||||
CONFIG_IP_PNP=y
|
||||
# CONFIG_IP_PNP_DHCP is not set
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
# CONFIG_IP_PNP_RARP is not set
|
||||
# CONFIG_NET_IPIP is not set
|
||||
# CONFIG_NET_IPGRE is not set
|
||||
# CONFIG_ARPD is not set
|
||||
# CONFIG_SYN_COOKIES is not set
|
||||
# CONFIG_INET_AH is not set
|
||||
# CONFIG_INET_ESP is not set
|
||||
# CONFIG_INET_IPCOMP is not set
|
||||
# CONFIG_INET_XFRM_TUNNEL is not set
|
||||
# CONFIG_INET_TUNNEL is not set
|
||||
CONFIG_INET_XFRM_MODE_TRANSPORT=y
|
||||
CONFIG_INET_XFRM_MODE_TUNNEL=y
|
||||
CONFIG_INET_XFRM_MODE_BEET=y
|
||||
CONFIG_INET_DIAG=y
|
||||
CONFIG_INET_TCP_DIAG=y
|
||||
# CONFIG_TCP_CONG_ADVANCED is not set
|
||||
CONFIG_TCP_CONG_CUBIC=y
|
||||
CONFIG_DEFAULT_TCP_CONG="cubic"
|
||||
# CONFIG_IPV6 is not set
|
||||
# CONFIG_INET6_XFRM_TUNNEL is not set
|
||||
# CONFIG_INET6_TUNNEL is not set
|
||||
# CONFIG_NETWORK_SECMARK is not set
|
||||
# CONFIG_NETFILTER is not set
|
||||
|
||||
#
|
||||
# DCCP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_DCCP is not set
|
||||
|
||||
#
|
||||
# SCTP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_SCTP is not set
|
||||
|
||||
#
|
||||
# TIPC Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_TIPC is not set
|
||||
# CONFIG_ATM is not set
|
||||
# CONFIG_BRIDGE is not set
|
||||
# CONFIG_VLAN_8021Q is not set
|
||||
# CONFIG_DECNET is not set
|
||||
# CONFIG_LLC2 is not set
|
||||
# CONFIG_IPX is not set
|
||||
# CONFIG_ATALK is not set
|
||||
# CONFIG_X25 is not set
|
||||
# CONFIG_LAPB is not set
|
||||
# CONFIG_ECONET is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
|
||||
#
|
||||
# QoS and/or fair queueing
|
||||
#
|
||||
# CONFIG_NET_SCHED is not set
|
||||
|
||||
#
|
||||
# Network testing
|
||||
#
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
# CONFIG_IRDA is not set
|
||||
# CONFIG_BT is not set
|
||||
# CONFIG_IEEE80211 is not set
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
|
||||
#
|
||||
# Generic Driver Options
|
||||
#
|
||||
CONFIG_STANDALONE=y
|
||||
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||
# CONFIG_FW_LOADER is not set
|
||||
# CONFIG_DEBUG_DRIVER is not set
|
||||
# CONFIG_SYS_HYPERVISOR is not set
|
||||
|
||||
#
|
||||
# Connector - unified userspace <-> kernelspace linker
|
||||
#
|
||||
# CONFIG_CONNECTOR is not set
|
||||
|
||||
#
|
||||
# Memory Technology Devices (MTD)
|
||||
#
|
||||
# CONFIG_MTD is not set
|
||||
|
||||
#
|
||||
# Parallel port support
|
||||
#
|
||||
# CONFIG_PARPORT is not set
|
||||
|
||||
#
|
||||
# Plug and Play support
|
||||
#
|
||||
|
||||
#
|
||||
# Block devices
|
||||
#
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
# CONFIG_BLK_DEV_LOOP is not set
|
||||
# CONFIG_BLK_DEV_NBD is not set
|
||||
# CONFIG_BLK_DEV_UB is not set
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
|
||||
#
|
||||
# SCSI device support
|
||||
#
|
||||
# CONFIG_RAID_ATTRS is not set
|
||||
CONFIG_SCSI=y
|
||||
# CONFIG_SCSI_NETLINK is not set
|
||||
CONFIG_SCSI_PROC_FS=y
|
||||
|
||||
#
|
||||
# SCSI support type (disk, tape, CD-ROM)
|
||||
#
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
# CONFIG_CHR_DEV_ST is not set
|
||||
# CONFIG_CHR_DEV_OSST is not set
|
||||
# CONFIG_BLK_DEV_SR is not set
|
||||
# CONFIG_CHR_DEV_SG is not set
|
||||
# CONFIG_CHR_DEV_SCH is not set
|
||||
|
||||
#
|
||||
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
||||
#
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
# CONFIG_SCSI_CONSTANTS is not set
|
||||
# CONFIG_SCSI_LOGGING is not set
|
||||
|
||||
#
|
||||
# SCSI Transports
|
||||
#
|
||||
# CONFIG_SCSI_SPI_ATTRS is not set
|
||||
# CONFIG_SCSI_FC_ATTRS is not set
|
||||
# CONFIG_SCSI_ISCSI_ATTRS is not set
|
||||
# CONFIG_SCSI_SAS_ATTRS is not set
|
||||
# CONFIG_SCSI_SAS_LIBSAS is not set
|
||||
|
||||
#
|
||||
# SCSI low-level drivers
|
||||
#
|
||||
# CONFIG_ISCSI_TCP is not set
|
||||
# CONFIG_SCSI_DEBUG is not set
|
||||
|
||||
#
|
||||
# Multi-device support (RAID and LVM)
|
||||
#
|
||||
# CONFIG_MD is not set
|
||||
|
||||
#
|
||||
# Fusion MPT device support
|
||||
#
|
||||
# CONFIG_FUSION is not set
|
||||
|
||||
#
|
||||
# IEEE 1394 (FireWire) support
|
||||
#
|
||||
|
||||
#
|
||||
# I2O device support
|
||||
#
|
||||
|
||||
#
|
||||
# Network device support
|
||||
#
|
||||
# CONFIG_NETDEVICES is not set
|
||||
# CONFIG_NETPOLL is not set
|
||||
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||
|
||||
#
|
||||
# ISDN subsystem
|
||||
#
|
||||
# CONFIG_ISDN is not set
|
||||
|
||||
#
|
||||
# Input device support
|
||||
#
|
||||
CONFIG_INPUT=y
|
||||
# CONFIG_INPUT_FF_MEMLESS is not set
|
||||
|
||||
#
|
||||
# Userland interfaces
|
||||
#
|
||||
CONFIG_INPUT_MOUSEDEV=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
||||
# CONFIG_INPUT_JOYDEV is not set
|
||||
# CONFIG_INPUT_TSDEV is not set
|
||||
# CONFIG_INPUT_EVDEV is not set
|
||||
# CONFIG_INPUT_EVBUG is not set
|
||||
|
||||
#
|
||||
# Input Device Drivers
|
||||
#
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_INPUT_JOYSTICK is not set
|
||||
# CONFIG_INPUT_TOUCHSCREEN is not set
|
||||
# CONFIG_INPUT_MISC is not set
|
||||
|
||||
#
|
||||
# Hardware I/O ports
|
||||
#
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_GAMEPORT is not set
|
||||
|
||||
#
|
||||
# Character devices
|
||||
#
|
||||
CONFIG_VT=y
|
||||
CONFIG_VT_CONSOLE=y
|
||||
CONFIG_HW_CONSOLE=y
|
||||
# CONFIG_VT_HW_CONSOLE_BINDING is not set
|
||||
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||
|
||||
#
|
||||
# Serial drivers
|
||||
#
|
||||
# CONFIG_SERIAL_8250 is not set
|
||||
|
||||
#
|
||||
# Non-8250 serial port support
|
||||
#
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
# CONFIG_SERIAL_ATMEL_TTYAT is not set
|
||||
CONFIG_SERIAL_CORE=y
|
||||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
|
||||
#
|
||||
# IPMI
|
||||
#
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
|
||||
#
|
||||
# Watchdog Cards
|
||||
#
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
|
||||
#
|
||||
# Watchdog Device Drivers
|
||||
#
|
||||
# CONFIG_SOFT_WATCHDOG is not set
|
||||
|
||||
#
|
||||
# USB-based Watchdog Cards
|
||||
#
|
||||
# CONFIG_USBPCWATCHDOG is not set
|
||||
CONFIG_HW_RANDOM=y
|
||||
# CONFIG_NVRAM is not set
|
||||
# CONFIG_DTLK is not set
|
||||
# CONFIG_R3964 is not set
|
||||
|
||||
#
|
||||
# Ftape, the floppy tape device driver
|
||||
#
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
|
||||
#
|
||||
# TPM devices
|
||||
#
|
||||
# CONFIG_TCG_TPM is not set
|
||||
|
||||
#
|
||||
# I2C support
|
||||
#
|
||||
# CONFIG_I2C is not set
|
||||
|
||||
#
|
||||
# SPI support
|
||||
#
|
||||
# CONFIG_SPI is not set
|
||||
# CONFIG_SPI_MASTER is not set
|
||||
|
||||
#
|
||||
# Dallas's 1-wire bus
|
||||
#
|
||||
# CONFIG_W1 is not set
|
||||
|
||||
#
|
||||
# Hardware Monitoring support
|
||||
#
|
||||
# CONFIG_HWMON is not set
|
||||
# CONFIG_HWMON_VID is not set
|
||||
|
||||
#
|
||||
# Misc devices
|
||||
#
|
||||
# CONFIG_TIFM_CORE is not set
|
||||
|
||||
#
|
||||
# LED devices
|
||||
#
|
||||
# CONFIG_NEW_LEDS is not set
|
||||
|
||||
#
|
||||
# LED drivers
|
||||
#
|
||||
|
||||
#
|
||||
# LED Triggers
|
||||
#
|
||||
|
||||
#
|
||||
# Multimedia devices
|
||||
#
|
||||
# CONFIG_VIDEO_DEV is not set
|
||||
|
||||
#
|
||||
# Digital Video Broadcasting Devices
|
||||
#
|
||||
# CONFIG_DVB is not set
|
||||
# CONFIG_USB_DABUSB is not set
|
||||
|
||||
#
|
||||
# Graphics support
|
||||
#
|
||||
# CONFIG_FIRMWARE_EDID is not set
|
||||
# CONFIG_FB is not set
|
||||
|
||||
#
|
||||
# Console display driver support
|
||||
#
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_DUMMY_CONSOLE=y
|
||||
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
||||
|
||||
#
|
||||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
|
||||
#
|
||||
# USB support
|
||||
#
|
||||
CONFIG_USB_ARCH_HAS_HCD=y
|
||||
CONFIG_USB_ARCH_HAS_OHCI=y
|
||||
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
||||
CONFIG_USB=y
|
||||
# CONFIG_USB_DEBUG is not set
|
||||
|
||||
#
|
||||
# Miscellaneous USB options
|
||||
#
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
# CONFIG_USB_BANDWIDTH is not set
|
||||
# CONFIG_USB_DYNAMIC_MINORS is not set
|
||||
# CONFIG_USB_OTG is not set
|
||||
|
||||
#
|
||||
# USB Host Controller Drivers
|
||||
#
|
||||
# CONFIG_USB_ISP116X_HCD is not set
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
|
||||
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
||||
# CONFIG_USB_SL811_HCD is not set
|
||||
|
||||
#
|
||||
# USB Device Class drivers
|
||||
#
|
||||
# CONFIG_USB_ACM is not set
|
||||
# CONFIG_USB_PRINTER is not set
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
||||
#
|
||||
|
||||
#
|
||||
# may also be needed; see USB_STORAGE Help for more information
|
||||
#
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_STORAGE_DEBUG=y
|
||||
# CONFIG_USB_STORAGE_DATAFAB is not set
|
||||
# CONFIG_USB_STORAGE_FREECOM is not set
|
||||
# CONFIG_USB_STORAGE_DPCM is not set
|
||||
# CONFIG_USB_STORAGE_USBAT is not set
|
||||
# CONFIG_USB_STORAGE_SDDR09 is not set
|
||||
# CONFIG_USB_STORAGE_SDDR55 is not set
|
||||
# CONFIG_USB_STORAGE_JUMPSHOT is not set
|
||||
# CONFIG_USB_STORAGE_ALAUDA is not set
|
||||
# CONFIG_USB_STORAGE_KARMA is not set
|
||||
# CONFIG_USB_LIBUSUAL is not set
|
||||
|
||||
#
|
||||
# USB Input Devices
|
||||
#
|
||||
# CONFIG_USB_HID is not set
|
||||
|
||||
#
|
||||
# USB HID Boot Protocol drivers
|
||||
#
|
||||
# CONFIG_USB_KBD is not set
|
||||
# CONFIG_USB_MOUSE is not set
|
||||
# CONFIG_USB_AIPTEK is not set
|
||||
# CONFIG_USB_WACOM is not set
|
||||
# CONFIG_USB_ACECAD is not set
|
||||
# CONFIG_USB_KBTAB is not set
|
||||
# CONFIG_USB_POWERMATE is not set
|
||||
# CONFIG_USB_TOUCHSCREEN is not set
|
||||
# CONFIG_USB_YEALINK is not set
|
||||
# CONFIG_USB_XPAD is not set
|
||||
# CONFIG_USB_ATI_REMOTE is not set
|
||||
# CONFIG_USB_ATI_REMOTE2 is not set
|
||||
# CONFIG_USB_KEYSPAN_REMOTE is not set
|
||||
# CONFIG_USB_APPLETOUCH is not set
|
||||
|
||||
#
|
||||
# USB Imaging devices
|
||||
#
|
||||
# CONFIG_USB_MDC800 is not set
|
||||
# CONFIG_USB_MICROTEK is not set
|
||||
|
||||
#
|
||||
# USB Network Adapters
|
||||
#
|
||||
# CONFIG_USB_CATC is not set
|
||||
# CONFIG_USB_KAWETH is not set
|
||||
# CONFIG_USB_PEGASUS is not set
|
||||
# CONFIG_USB_RTL8150 is not set
|
||||
# CONFIG_USB_USBNET_MII is not set
|
||||
# CONFIG_USB_USBNET is not set
|
||||
CONFIG_USB_MON=y
|
||||
|
||||
#
|
||||
# USB port drivers
|
||||
#
|
||||
|
||||
#
|
||||
# USB Serial Converter support
|
||||
#
|
||||
# CONFIG_USB_SERIAL is not set
|
||||
|
||||
#
|
||||
# USB Miscellaneous drivers
|
||||
#
|
||||
# CONFIG_USB_EMI62 is not set
|
||||
# CONFIG_USB_EMI26 is not set
|
||||
# CONFIG_USB_ADUTUX is not set
|
||||
# CONFIG_USB_AUERSWALD is not set
|
||||
# CONFIG_USB_RIO500 is not set
|
||||
# CONFIG_USB_LEGOTOWER is not set
|
||||
# CONFIG_USB_LCD is not set
|
||||
# CONFIG_USB_LED is not set
|
||||
# CONFIG_USB_CYPRESS_CY7C63 is not set
|
||||
# CONFIG_USB_CYTHERM is not set
|
||||
# CONFIG_USB_PHIDGET is not set
|
||||
# CONFIG_USB_IDMOUSE is not set
|
||||
# CONFIG_USB_FTDI_ELAN is not set
|
||||
# CONFIG_USB_APPLEDISPLAY is not set
|
||||
# CONFIG_USB_LD is not set
|
||||
# CONFIG_USB_TRANCEVIBRATOR is not set
|
||||
# CONFIG_USB_TEST is not set
|
||||
|
||||
#
|
||||
# USB DSL modem support
|
||||
#
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
#
|
||||
CONFIG_USB_GADGET=y
|
||||
# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
||||
CONFIG_USB_GADGET_SELECTED=y
|
||||
# CONFIG_USB_GADGET_NET2280 is not set
|
||||
# CONFIG_USB_GADGET_PXA2XX is not set
|
||||
# CONFIG_USB_GADGET_GOKU is not set
|
||||
# CONFIG_USB_GADGET_LH7A40X is not set
|
||||
# CONFIG_USB_GADGET_OMAP is not set
|
||||
CONFIG_USB_GADGET_AT91=y
|
||||
CONFIG_USB_AT91=y
|
||||
# CONFIG_USB_GADGET_DUMMY_HCD is not set
|
||||
# CONFIG_USB_GADGET_DUALSPEED is not set
|
||||
CONFIG_USB_ZERO=m
|
||||
# CONFIG_USB_ETH is not set
|
||||
CONFIG_USB_GADGETFS=m
|
||||
CONFIG_USB_FILE_STORAGE=m
|
||||
# CONFIG_USB_FILE_STORAGE_TEST is not set
|
||||
CONFIG_USB_G_SERIAL=m
|
||||
# CONFIG_USB_MIDI_GADGET is not set
|
||||
|
||||
#
|
||||
# MMC/SD Card support
|
||||
#
|
||||
# CONFIG_MMC is not set
|
||||
|
||||
#
|
||||
# Real Time Clock
|
||||
#
|
||||
CONFIG_RTC_LIB=y
|
||||
# CONFIG_RTC_CLASS is not set
|
||||
|
||||
#
|
||||
# File systems
|
||||
#
|
||||
CONFIG_EXT2_FS=y
|
||||
# CONFIG_EXT2_FS_XATTR is not set
|
||||
# CONFIG_EXT2_FS_XIP is not set
|
||||
# CONFIG_EXT3_FS is not set
|
||||
# CONFIG_EXT4DEV_FS is not set
|
||||
# CONFIG_REISERFS_FS is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
# CONFIG_FS_POSIX_ACL is not set
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_GFS2_FS is not set
|
||||
# CONFIG_OCFS2_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_ROMFS_FS is not set
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_INOTIFY_USER=y
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
# CONFIG_FUSE_FS is not set
|
||||
|
||||
#
|
||||
# CD-ROM/DVD Filesystems
|
||||
#
|
||||
# CONFIG_ISO9660_FS is not set
|
||||
# CONFIG_UDF_FS is not set
|
||||
|
||||
#
|
||||
# DOS/FAT/NT Filesystems
|
||||
#
|
||||
CONFIG_FAT_FS=y
|
||||
# CONFIG_MSDOS_FS is not set
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_FAT_DEFAULT_CODEPAGE=437
|
||||
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
||||
# CONFIG_NTFS_FS is not set
|
||||
|
||||
#
|
||||
# Pseudo filesystems
|
||||
#
|
||||
CONFIG_PROC_FS=y
|
||||
CONFIG_PROC_SYSCTL=y
|
||||
CONFIG_SYSFS=y
|
||||
CONFIG_TMPFS=y
|
||||
# CONFIG_TMPFS_POSIX_ACL is not set
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
CONFIG_RAMFS=y
|
||||
# CONFIG_CONFIGFS_FS is not set
|
||||
|
||||
#
|
||||
# Miscellaneous filesystems
|
||||
#
|
||||
# CONFIG_ADFS_FS is not set
|
||||
# CONFIG_AFFS_FS is not set
|
||||
# CONFIG_HFS_FS is not set
|
||||
# CONFIG_HFSPLUS_FS is not set
|
||||
# CONFIG_BEFS_FS is not set
|
||||
# CONFIG_BFS_FS is not set
|
||||
# CONFIG_EFS_FS is not set
|
||||
CONFIG_CRAMFS=y
|
||||
# CONFIG_VXFS_FS is not set
|
||||
# CONFIG_HPFS_FS is not set
|
||||
# CONFIG_QNX4FS_FS is not set
|
||||
# CONFIG_SYSV_FS is not set
|
||||
# CONFIG_UFS_FS is not set
|
||||
|
||||
#
|
||||
# Network File Systems
|
||||
#
|
||||
# CONFIG_NFS_FS is not set
|
||||
# CONFIG_NFSD is not set
|
||||
# CONFIG_SMB_FS is not set
|
||||
# CONFIG_CIFS is not set
|
||||
# CONFIG_NCP_FS is not set
|
||||
# CONFIG_CODA_FS is not set
|
||||
# CONFIG_AFS_FS is not set
|
||||
# CONFIG_9P_FS is not set
|
||||
|
||||
#
|
||||
# Partition Types
|
||||
#
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
|
||||
#
|
||||
# Native Language Support
|
||||
#
|
||||
CONFIG_NLS=y
|
||||
CONFIG_NLS_DEFAULT="iso8859-1"
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
# CONFIG_NLS_CODEPAGE_737 is not set
|
||||
# CONFIG_NLS_CODEPAGE_775 is not set
|
||||
CONFIG_NLS_CODEPAGE_850=y
|
||||
# CONFIG_NLS_CODEPAGE_852 is not set
|
||||
# CONFIG_NLS_CODEPAGE_855 is not set
|
||||
# CONFIG_NLS_CODEPAGE_857 is not set
|
||||
# CONFIG_NLS_CODEPAGE_860 is not set
|
||||
# CONFIG_NLS_CODEPAGE_861 is not set
|
||||
# CONFIG_NLS_CODEPAGE_862 is not set
|
||||
# CONFIG_NLS_CODEPAGE_863 is not set
|
||||
# CONFIG_NLS_CODEPAGE_864 is not set
|
||||
# CONFIG_NLS_CODEPAGE_865 is not set
|
||||
# CONFIG_NLS_CODEPAGE_866 is not set
|
||||
# CONFIG_NLS_CODEPAGE_869 is not set
|
||||
# CONFIG_NLS_CODEPAGE_936 is not set
|
||||
# CONFIG_NLS_CODEPAGE_950 is not set
|
||||
# CONFIG_NLS_CODEPAGE_932 is not set
|
||||
# CONFIG_NLS_CODEPAGE_949 is not set
|
||||
# CONFIG_NLS_CODEPAGE_874 is not set
|
||||
# CONFIG_NLS_ISO8859_8 is not set
|
||||
# CONFIG_NLS_CODEPAGE_1250 is not set
|
||||
# CONFIG_NLS_CODEPAGE_1251 is not set
|
||||
# CONFIG_NLS_ASCII is not set
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
# CONFIG_NLS_ISO8859_2 is not set
|
||||
# CONFIG_NLS_ISO8859_3 is not set
|
||||
# CONFIG_NLS_ISO8859_4 is not set
|
||||
# CONFIG_NLS_ISO8859_5 is not set
|
||||
# CONFIG_NLS_ISO8859_6 is not set
|
||||
# CONFIG_NLS_ISO8859_7 is not set
|
||||
# CONFIG_NLS_ISO8859_9 is not set
|
||||
# CONFIG_NLS_ISO8859_13 is not set
|
||||
# CONFIG_NLS_ISO8859_14 is not set
|
||||
# CONFIG_NLS_ISO8859_15 is not set
|
||||
# CONFIG_NLS_KOI8_R is not set
|
||||
# CONFIG_NLS_KOI8_U is not set
|
||||
# CONFIG_NLS_UTF8 is not set
|
||||
|
||||
#
|
||||
# Profiling support
|
||||
#
|
||||
# CONFIG_PROFILING is not set
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_PRINTK_TIME is not set
|
||||
CONFIG_ENABLE_MUST_CHECK=y
|
||||
# CONFIG_MAGIC_SYSRQ is not set
|
||||
# CONFIG_UNUSED_SYMBOLS is not set
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_DETECT_SOFTLOCKUP=y
|
||||
# CONFIG_SCHEDSTATS is not set
|
||||
# CONFIG_DEBUG_SLAB is not set
|
||||
# CONFIG_DEBUG_RT_MUTEXES is not set
|
||||
# CONFIG_RT_MUTEX_TESTER is not set
|
||||
# CONFIG_DEBUG_SPINLOCK is not set
|
||||
# CONFIG_DEBUG_MUTEXES is not set
|
||||
# CONFIG_DEBUG_RWSEMS is not set
|
||||
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
||||
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
|
||||
# CONFIG_DEBUG_KOBJECT is not set
|
||||
CONFIG_DEBUG_BUGVERBOSE=y
|
||||
# CONFIG_DEBUG_INFO is not set
|
||||
# CONFIG_DEBUG_FS is not set
|
||||
# CONFIG_DEBUG_VM is not set
|
||||
# CONFIG_DEBUG_LIST is not set
|
||||
CONFIG_FRAME_POINTER=y
|
||||
CONFIG_FORCED_INLINING=y
|
||||
# CONFIG_HEADERS_CHECK is not set
|
||||
# CONFIG_RCU_TORTURE_TEST is not set
|
||||
CONFIG_DEBUG_USER=y
|
||||
# CONFIG_DEBUG_WAITQ is not set
|
||||
# CONFIG_DEBUG_ERRORS is not set
|
||||
CONFIG_DEBUG_LL=y
|
||||
# CONFIG_DEBUG_ICEDCC is not set
|
||||
|
||||
#
|
||||
# Security options
|
||||
#
|
||||
# CONFIG_KEYS is not set
|
||||
# CONFIG_SECURITY is not set
|
||||
|
||||
#
|
||||
# Cryptographic options
|
||||
#
|
||||
# CONFIG_CRYPTO is not set
|
||||
|
||||
#
|
||||
# Library routines
|
||||
#
|
||||
# CONFIG_CRC_CCITT is not set
|
||||
# CONFIG_CRC16 is not set
|
||||
CONFIG_CRC32=y
|
||||
# CONFIG_LIBCRC32C is not set
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_PLIST=y
|
||||
|
|
@ -26,6 +26,7 @@ obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
|
|||
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
|
||||
|
||||
# AT91SAM9260 board-specific support
|
||||
obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
|
||||
|
||||
# AT91SAM9261 board-specific support
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,201 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-at91rm9200/board-ek.c
|
||||
*
|
||||
* Copyright (C) 2005 SAN People
|
||||
* Copyright (C) 2006 Atmel
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/spi/spi.h>
|
||||
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/setup.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/irq.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/mach/irq.h>
|
||||
|
||||
#include <asm/arch/board.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
#include <asm/arch/at91sam926x_mc.h>
|
||||
|
||||
#include "generic.h"
|
||||
|
||||
|
||||
/*
|
||||
* Serial port configuration.
|
||||
* 0 .. 5 = USART0 .. USART5
|
||||
* 6 = DBGU
|
||||
*/
|
||||
static struct at91_uart_config __initdata ek_uart_config = {
|
||||
.console_tty = 0, /* ttyS0 */
|
||||
.nr_tty = 3,
|
||||
.tty_map = { 6, 0, 1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */
|
||||
};
|
||||
|
||||
static void __init ek_map_io(void)
|
||||
{
|
||||
/* Initialize processor: 18.432 MHz crystal */
|
||||
at91sam9260_initialize(18432000);
|
||||
|
||||
/* Setup the serial ports and console */
|
||||
at91_init_serial(&ek_uart_config);
|
||||
}
|
||||
|
||||
static void __init ek_init_irq(void)
|
||||
{
|
||||
at91sam9260_init_interrupts(NULL);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* USB Host port
|
||||
*/
|
||||
static struct at91_usbh_data __initdata ek_usbh_data = {
|
||||
.ports = 2,
|
||||
};
|
||||
|
||||
/*
|
||||
* USB Device port
|
||||
*/
|
||||
static struct at91_udc_data __initdata ek_udc_data = {
|
||||
.vbus_pin = AT91_PIN_PC5,
|
||||
.pullup_pin = 0, /* pull-up driven by UDC */
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* SPI devices.
|
||||
*/
|
||||
static struct spi_board_info ek_spi_devices[] = {
|
||||
#if !defined(CONFIG_MMC_AT91)
|
||||
{ /* DataFlash chip */
|
||||
.modalias = "mtd_dataflash",
|
||||
.chip_select = 1,
|
||||
.max_speed_hz = 15 * 1000 * 1000,
|
||||
.bus_num = 0,
|
||||
},
|
||||
#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
|
||||
{ /* DataFlash card */
|
||||
.modalias = "mtd_dataflash",
|
||||
.chip_select = 0,
|
||||
.max_speed_hz = 15 * 1000 * 1000,
|
||||
.bus_num = 0,
|
||||
},
|
||||
#endif
|
||||
#endif
|
||||
#if defined(CONFIG_SND_AT73C213)
|
||||
{ /* AT73C213 DAC */
|
||||
.modalias = "snd_at73c213",
|
||||
.chip_select = 0,
|
||||
.max_speed_hz = 10 * 1000 * 1000,
|
||||
.bus_num = 1,
|
||||
},
|
||||
#endif
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* MACB Ethernet device
|
||||
*/
|
||||
static struct __initdata eth_platform_data ek_macb_data = {
|
||||
.is_rmii = 1,
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* NAND flash
|
||||
*/
|
||||
static struct mtd_partition __initdata ek_nand_partition[] = {
|
||||
{
|
||||
.name = "Partition 1",
|
||||
.offset = 0,
|
||||
.size = 256 * 1024,
|
||||
},
|
||||
{
|
||||
.name = "Partition 2",
|
||||
.offset = 256 * 1024,
|
||||
.size = MTDPART_SIZ_FULL,
|
||||
},
|
||||
};
|
||||
|
||||
static struct mtd_partition *nand_partitions(int size, int *num_partitions)
|
||||
{
|
||||
*num_partitions = ARRAY_SIZE(ek_nand_partition);
|
||||
return ek_nand_partition;
|
||||
}
|
||||
|
||||
static struct at91_nand_data __initdata ek_nand_data = {
|
||||
.ale = 21,
|
||||
.cle = 22,
|
||||
// .det_pin = ... not connected
|
||||
.rdy_pin = AT91_PIN_PC13,
|
||||
.enable_pin = AT91_PIN_PC14,
|
||||
.partition_info = nand_partitions,
|
||||
#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
|
||||
.bus_width_16 = 1,
|
||||
#else
|
||||
.bus_width_16 = 0,
|
||||
#endif
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* MCI (SD/MMC)
|
||||
*/
|
||||
static struct at91_mmc_data __initdata ek_mmc_data = {
|
||||
.slot_b = 1,
|
||||
.wire4 = 1,
|
||||
// .det_pin = ... not connected
|
||||
// .wp_pin = ... not connected
|
||||
// .vcc_pin = ... not connected
|
||||
};
|
||||
|
||||
static void __init ek_board_init(void)
|
||||
{
|
||||
/* Serial */
|
||||
at91_add_device_serial();
|
||||
/* USB Host */
|
||||
at91_add_device_usbh(&ek_usbh_data);
|
||||
/* USB Device */
|
||||
at91_add_device_udc(&ek_udc_data);
|
||||
/* SPI */
|
||||
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
|
||||
/* NAND */
|
||||
at91_add_device_nand(&ek_nand_data);
|
||||
/* Ethernet */
|
||||
at91_add_device_eth(&ek_macb_data);
|
||||
/* MMC */
|
||||
at91_add_device_mmc(&ek_mmc_data);
|
||||
}
|
||||
|
||||
MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
|
||||
/* Maintainer: Atmel */
|
||||
.phys_io = AT91_BASE_SYS,
|
||||
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
|
||||
.boot_params = AT91_SDRAM_BASE + 0x100,
|
||||
.timer = &at91sam926x_timer,
|
||||
.map_io = ek_map_io,
|
||||
.init_irq = ek_init_irq,
|
||||
.init_machine = ek_board_init,
|
||||
MACHINE_END
|
||||
Loading…
Reference in New Issue