ASoC: cs35l56: Allow a wider range for reset pulse width
There is no reason to have such a tight usleep range of 400us and it is acceptable to allow MIN_US * 2. Also wrap the usleep in an inline function. Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/168147949455.26.3401634900657387799@mailman-core.alsa-project.org Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
7d72351a4e
commit
b82396122b
|
@ -835,6 +835,12 @@ static int cs35l56_wait_for_firmware_boot(struct cs35l56_private *cs35l56)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static inline void cs35l56_wait_min_reset_pulse(void)
|
||||
{
|
||||
/* Satisfy minimum reset pulse width spec */
|
||||
usleep_range(CS35L56_RESET_PULSE_MIN_US, 2 * CS35L56_RESET_PULSE_MIN_US);
|
||||
}
|
||||
|
||||
static const struct reg_sequence cs35l56_system_reset_seq[] = {
|
||||
REG_SEQ0(CS35L56_DSP_VIRTUAL1_MBOX_1, CS35L56_MBOX_CMD_SYSTEM_RESET),
|
||||
};
|
||||
|
@ -1236,7 +1242,7 @@ int cs35l56_system_suspend_late(struct device *dev)
|
|||
*/
|
||||
if (cs35l56->reset_gpio) {
|
||||
gpiod_set_value_cansleep(cs35l56->reset_gpio, 0);
|
||||
usleep_range(CS35L56_RESET_PULSE_MIN_US, CS35L56_RESET_PULSE_MIN_US + 400);
|
||||
cs35l56_wait_min_reset_pulse();
|
||||
}
|
||||
|
||||
regulator_bulk_disable(ARRAY_SIZE(cs35l56->supplies), cs35l56->supplies);
|
||||
|
@ -1289,7 +1295,7 @@ int cs35l56_system_resume_early(struct device *dev)
|
|||
/* Ensure a spec-compliant RESET pulse. */
|
||||
if (cs35l56->reset_gpio) {
|
||||
gpiod_set_value_cansleep(cs35l56->reset_gpio, 0);
|
||||
usleep_range(CS35L56_RESET_PULSE_MIN_US, CS35L56_RESET_PULSE_MIN_US + 400);
|
||||
cs35l56_wait_min_reset_pulse();
|
||||
}
|
||||
|
||||
/* Enable supplies before releasing RESET. */
|
||||
|
@ -1440,9 +1446,7 @@ int cs35l56_common_probe(struct cs35l56_private *cs35l56)
|
|||
return dev_err_probe(cs35l56->dev, ret, "Failed to enable supplies\n");
|
||||
|
||||
if (cs35l56->reset_gpio) {
|
||||
/* satisfy minimum reset pulse width spec */
|
||||
usleep_range(CS35L56_RESET_PULSE_MIN_US,
|
||||
CS35L56_RESET_PULSE_MIN_US + 400);
|
||||
cs35l56_wait_min_reset_pulse();
|
||||
gpiod_set_value_cansleep(cs35l56->reset_gpio, 1);
|
||||
}
|
||||
|
||||
|
|
Loading…
Reference in New Issue