Qualcomm pinctrl Devicetree bindings changes for v6.4

Cleanup and improvement of the bindings to use "unevaluatedProperties"
 instead of "additionalProperties", which allows to accept all the
 properties already parsed by referenced common qcom,tlmm-common.yaml
 schema.
 
 That common qcom,tlmm-common.yaml binding is going to remove
 "input-enable" property, thus using "unevaluatedProperties" allows such
 change to propagate to other bindings automatically.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmQ2dcwQHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD1/deD/4vfx9gBtk66N5abWY91WmW6yvMD3YAhZDT
 TF0gGvY6Jhocp4/OdGLx/09KXpnl9Uubuq7mWRkQ1VLVAe94A3MrlX+FR/dfBUW1
 U8eeCKoj8nmalW1Nv4Y278Dp/GIz6Iy6Kio6elPcKX56sp98LjsT32fcmi9F9Vdc
 2ptakMbHEdQD/HV4BJQn+EqS/Pcd8c0TsrEQOgZF1fK22buMOiv14YZDvftM34Ez
 GHJjwkKN8Z3utaLMbNnJW8m44hoftVSpN3FbugMSBE5lxGZx73olaioBh74iBd/a
 E18NRSBmSR/yK0bXXNqCXPWv+6JWpfsui+OEMvXwBSG1hQhoUEQSbMBy5GMBZxKl
 T4M+NxAs7yXdlC6Y6nWa09tblf27MgwmyYCN4HNf33iQVjL9s7Srs4v9E1DmxI/Z
 26Xkh2w2pzSnqLWElsgHG/WT0IYm0p9KT1fCqD2t/u4SO9UXi2lbeL05VKne+LWE
 Jy4qlwRTu7Z3uR7az83KNjjInEvhg+alxKnQ2SNJkJTGvimI/Pm/tlMAkDvgqreO
 1R6vo4tu4192PCTH3NNhdaAwxSYHb97z7t6cJ2PepFdOhXn2glcg6RJ1YY6VjfCb
 Kcv6cjy6ajGL+1xsMM6WWClxzKf3AGCWvYal8yiTBWXtz3F9aHI7xsk7H1EM4vp4
 /pRLt91XQA==
 =9rw5
 -----END PGP SIGNATURE-----

Merge tag 'qcom-pinctrl-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into devel

Qualcomm pinctrl Devicetree bindings changes for v6.4

Cleanup and improvement of the bindings to use "unevaluatedProperties"
instead of "additionalProperties", which allows to accept all the
properties already parsed by referenced common qcom,tlmm-common.yaml
schema.

That common qcom,tlmm-common.yaml binding is going to remove
"input-enable" property, thus using "unevaluatedProperties" allows such
change to propagate to other bindings automatically.

Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml

@@ -56,6 +56,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -92,19 +93,9 @@ $defs:
                 rx1, sdc_data, sdc_clk, sdc_cmd, tsens_max, wci_txd, wci_rxd,
                 wsi_clk, wsi_clk3, wsi_data, wsi_data3, wsis_reset, xfem ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml

@@ -43,6 +43,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -89,18 +90,9 @@ $defs:
                 sd_write, sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2,
                 uim3, uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 

Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml

@@ -53,6 +53,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -92,19 +93,9 @@ $defs:
                 qdss_tracedata_b, qpic, rx0, rx1, rx2, sd_card, sd_write,
                 tsens_max, wci2a, wci2b, wci2c, wci2d ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 

Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml

@@ -54,6 +54,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -105,19 +106,9 @@ $defs:
                 uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk,
                 uim2_data, uim2_present, uim2_reset, uim_batt, wlan_en1, ]
 
-      bias-disable: true
-      bias-pull-down: true
-      bias-pull-up: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml

@@ -51,6 +51,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -70,19 +71,9 @@ $defs:
         enum: [ gpio, gsbi2_i2c, gsbi3, gsbi4, gsbi5_i2c, gsbi5_uart,
                 sdc2, ebi2_lcdc, ps_hold, prim_audio, sec_audio, cdc_mclk, ]
 
-      bias-disable: true
-      bias-pull-down: true
-      bias-pull-up: true
-      drive-strength: true
-      output-high: true
-      output-low: true
-      input-enable: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml

@@ -48,6 +48,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -71,19 +72,9 @@ $defs:
                 blsp_uart3, blsp_uart4, blsp_uart5, cam_mclk0, cam_mclk1,
                 gp0_clk, gp1_clk, sdc3, wlan ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 

Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml

@@ -53,6 +53,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -81,20 +82,9 @@ $defs:
                 sdc5, tsif1, tsif2, usb_fs1, usb_fs1_oe_n, usb_fs2,
                 usb_fs2_oe_n, vfe, vsens_alarm, ebi2, ebi2cs ]
 
-
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 

Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml

@@ -55,6 +55,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -104,19 +105,9 @@ $defs:
                 uim3_clk, uim3_data, uim3_present, uim3_reset, uim_batt,
                 wcss_bt, wcss_fm, wcss_wlan ]
 
-      bias-disable: true
-      bias-pull-down: true
-      bias-pull-up: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml

@@ -53,6 +53,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -103,19 +104,9 @@ $defs:
                 uim1, uim2, uim3, uim_batt, wcss_bt, wcss_fm, wcss_wlan,
                 webcam1_rst ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 

Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml

@@ -45,6 +45,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -106,18 +107,9 @@ $defs:
                 uim_batt, us_emitter, us_euro, wcss_bt, wcss_fm, wcss_wlan,
                 wcss_wlan0, wcss_wlan1, wcss_wlan2, wsa_en, wsa_io, wsa_irq ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 

Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml

@@ -53,6 +53,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -97,19 +98,9 @@ $defs:
                 vfe_camif_timer7_a, vfe_camif_timer7_b, vfe_camif_timer7_c,
                 wlan ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 

Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml

@@ -53,6 +53,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -93,14 +94,6 @@ $defs:
                 tsif1, tsif2, hsic, grfc, audio_ref_clk, qua_mi2s, pri_mi2s,
                 spkr_mi2s, ter_mi2s, sec_mi2s, bt, fm, wlan, slimbus, hsic_ctl ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
@@ -124,8 +117,6 @@ $defs:
             output-high: false
             output-low: false
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 

Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml

@@ -53,6 +53,7 @@ $defs:
       Desired pin configuration for a device or its specific state (like sleep
       or active).
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -93,19 +94,9 @@ $defs:
                 wsa_irq, blsp_i2c8, pa_indicator, modem_tsync, ssbi_wtr1,
                 gsm1_tx, gsm0_tx, sdcard_det, sec_mi2s, ss_switch ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 

Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml

@@ -55,6 +55,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -103,19 +104,9 @@ $defs:
                 pri_mi2s, sdc4, sec_mi2s, slimbus, spkr_i2s, ter_mi2s, tsif1,
                 tsif2, uim_batt_alarm, uim1, uim2, uim3, uim4 ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 

Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml

@@ -53,6 +53,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -122,19 +123,9 @@ $defs:
                 modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, qspi_cs, ssbi2,
                 ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3 ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 

Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml

@@ -53,6 +53,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -107,19 +108,9 @@ $defs:
                 vsense_clkout, vsense_data0, vsense_data1, vsense_mode,
                 wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1 ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 

Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml

@@ -59,6 +59,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -119,19 +120,9 @@ $defs:
                 spdifrx_opt, spi_lcd, spkr_dac0, wlan1_adc0, wlan1_adc1,
                 wlan2_adc0, wlan2_adc1, wsa_en ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 

Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml

@@ -55,6 +55,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -93,19 +94,9 @@ $defs:
                 usb2phy_ac, usb_con_det, usb_dfp_en, usb_phy, vfr_0, vfr_1,
                 vsense_trigger ]
 
-      bias-disable: true
-      bias-pull-down: true
-      bias-pull-up: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml

@@ -58,6 +58,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -103,19 +104,9 @@ $defs:
                 tgu_ch2, tgu_ch3, tgu_ch4, tgu_ch5, tsense_pwm1, tsense_pwm2,
                 tsense_pwm3, tsense_pwm4, usb2phy_ac, vsense_trigger ]
 
-      bias-disable: true
-      bias-pull-down: true
-      bias-pull-up: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml

@@ -59,6 +59,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -100,19 +101,9 @@ $defs:
                 _V_GPIO, _V_PPS_IN, _V_PPS_OUT, vsense_trigger, wlan1_adc0,
                 wlan1_adc1, wlan2_adc0, wlan2_adc1 ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 

Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml

@@ -62,6 +62,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -110,20 +111,9 @@ $defs:
                 uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac,
                 usb_phy, vfr_0, vfr_1, vsense_trigger ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-bus-hold: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 

Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml

@@ -62,6 +62,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -102,19 +103,9 @@ $defs:
                 usb0_phy, usb1_phy, usb2phy_ac, vfr_1, vsense_trigger,
                 wlan1_adc, wlan2_adc, wmss_reset ]
 
-      bias-disable: true
-      bias-pull-down: true
-      bias-pull-up: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml

@@ -65,6 +65,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -122,19 +123,9 @@ $defs:
                 vsense_data0, vsense_data1, vsense_mode, wlan1_adc0,
                 wlan1_adc1, wlan2_adc0, wlan2_adc1 ]
 
-      bias-disable: true
-      bias-pull-down: true
-      bias-pull-up: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml

@@ -58,6 +58,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -94,20 +95,9 @@ $defs:
                 uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, vfr_1,
                 vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data, ]
 
-
-      bias-disable: true
-      bias-pull-down: true
-      bias-pull-up: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml

@@ -61,6 +61,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -102,19 +103,9 @@ $defs:
                 uim_batt, usb_phy, vfr_1, vsense_trigger, wlan1_adc0,
                 wlan1_adc1, wlan2_adc0, wlan2_adc1]
 
-      bias-disable: true
-      bias-pull-down: true
-      bias-pull-up: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml

@@ -48,6 +48,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -91,18 +92,9 @@ $defs:
                 uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present,
                 uim2_reset, usb2phy_ac, vsense_trigger ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 

Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml

@@ -47,6 +47,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -111,18 +112,9 @@ $defs:
                 qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3,
                 gpio ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 

Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml

@@ -53,6 +53,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -85,18 +86,9 @@ $defs:
                 uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger,
                 wlan1_adc0, elan1_adc1 ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 

Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml

@@ -61,6 +61,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -101,19 +102,9 @@ $defs:
                 wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ]
 
 
-      bias-disable: true
-      bias-pull-down: true
-      bias-pull-up: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml

@@ -63,6 +63,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -108,20 +109,9 @@ $defs:
                 uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
                 wlan2_adc0, wlan2_adc1, ]
 
-
-      bias-disable: true
-      bias-pull-down: true
-      bias-pull-up: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml

@@ -55,6 +55,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -109,20 +110,9 @@ $defs:
                 usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
                 wlan2_adc0, wlan2_adc1 ]
 
-
-      bias-disable: true
-      bias-pull-down: true
-      bias-pull-up: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml

@@ -60,6 +60,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -101,19 +102,9 @@ $defs:
                 usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
                 wlan2_adc0, wlan2_adc1, wmss_reset ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 

Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml

@@ -58,6 +58,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -94,19 +95,9 @@ $defs:
                 tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
                 tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 

Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml

@@ -62,6 +62,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -104,21 +105,9 @@ $defs:
                 uim0_present, uim0_reset, uim1_clk, uim1_data, uim1_present,
                 uim1_reset, usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ]
 
-
-      bias-disable: true
-      bias-pull-down: true
-      bias-pull-up: true
-      drive-strength: true
-      input-disable: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml

@@ -62,6 +62,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -103,19 +104,9 @@ $defs:
                 uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset,
                 usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ]
 
-      bias-disable: true
-      bias-pull-down: true
-      bias-pull-up: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml

@@ -54,6 +54,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -109,19 +110,9 @@ $defs:
                 uim1_clk, uim1_data, uim1_present, uim1_reset,
                 usb1_hs, usb_phy, vfr_0, vfr_1, vsense_trigger_mirnat ]
 
-      bias-disable: true
-      bias-pull-down: true
-      bias-pull-up: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg