i2c-nomadik: remove the unnecessary delay

The delay in the driver seems to be not needed, so remove it.

Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: Markus Grape <markus.grape@stericsson.com>
Tested-by: Per Persson <per.xb.persson@stericsson.com>
Tested-by: Chethan Krishna N <chethan.krishna@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This commit is contained in:
Virupax Sadashivpetimath 2011-05-13 12:30:42 +02:00 committed by Ben Dooks
parent 553553413a
commit b5e890f7e7
1 changed files with 2 additions and 18 deletions

View File

@ -15,7 +15,6 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
@ -105,9 +104,6 @@
/* maximum threshold value */
#define MAX_I2C_FIFO_THRESHOLD 15
/* per-transfer delay, required for the hardware to stabilize */
#define I2C_DELAY 150
enum i2c_status {
I2C_NOP,
I2C_ON_GOING,
@ -269,12 +265,6 @@ static int init_hw(struct nmk_i2c_dev *dev)
dev->cli.operation = I2C_NO_OPERATION;
exit:
/*
* TODO: What is this delay for?
* Must be pretty pointless since the hw block
* is frozen. Or?
*/
udelay(I2C_DELAY);
return stat;
}
@ -652,7 +642,6 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
break;
}
udelay(I2C_DELAY);
}
if (status == 0)
break;
@ -778,13 +767,8 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
}
}
i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_MTD);
i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_MTDWS);
disable_interrupts(dev,
(I2C_IT_TXFNE | I2C_IT_TXFE | I2C_IT_TXFF
| I2C_IT_TXFOVR | I2C_IT_RXFNF
| I2C_IT_RXFF | I2C_IT_RXFE));
disable_all_interrupts(dev);
clear_all_interrupts(dev);
if (dev->cli.count) {
dev->result = -EIO;