UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

This is a rather large set of bugfixes, as we just returned from the 

Christmas break. Most of these are relatively unimportant fixes for
 regressions introduced during the merge window, and about half of
 the changes are for mach-omap2.
 
 A couple of patches are just cleanups and dead code removal that I would
 not normally have considered for merging after -rc2, but I decided to
 take them along with the fixes this time.
 
 Notable fixes include:
 
 - removing the skeleton.dtsi include broke a number of machines, and we
   have to put empty /chosen nodes back to be able to pass kernel command
   lines as before
 
 - enabling Samsung platforms no longer hardwires CONFIG_HZ to 200,
   as it had been for no good reason for a long time.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWG1rP2CrR//JCVInAQLAzg//c0+rQ037TvxWsGl6frL2ogDDbTIDcG8k
 t1JZNvD4+E2zV3BZ4mWCOrmGBB02N0ZEERlrHZtshN+OjvzaTgwqTopNoYfkerdR
 3ObuxEkfovL0BkRYhC+r9KoiX89koqT6ETDelnKD5UBfeplqUa7kq+MUsGSHq+vo
 DkUZJPHeWzSymIe3dnAjY9QaLyCtXgf5c0rakSRbQfnNYGT6dHJZSGMadzg07Aqd
 FWOlIds5aE1MsBj18O8i/xylStGWLzOoGJCbF1dOm5rT4fGi9hFIrxkOlTS1a75Z
 0S5MoMkgd1cqtOR0s6zZ8KDYemqrnoopqtfDKW3ycpfXyrYbgAnqJB7mfYKi4Vja
 Kifgxo6Cz9QoAHrCdQb1MCiiwt9te2lNmT8M+eEaIojunOEJHyoHLmNigDw5MPZu
 AgzmukBhENumhQTqPdc0wMuZ+KY1fGGn+DwImHUm/yMGHz1LtnedSfqcgzhNJec9
 QmvP0o1nW8m1+kWcJm0vwzP0+TQmEFmqhBWHX9A+Hc1p9dnGqFxWfJoYnfvjTsFf
 AmTWvD7UfIF0uHzLOS/wqC6HexFm/XgDtbgx0ug/rEyTTzERc4E0blRfd2du0DH9
 XqWgQ/46UZBv5bpzmXkdvQnP1wX6hHNcz0juNVh+71tMeBNCHim4lQIzja2rPqAO
 L+r6Ihv4v/Q=
 =J2uq
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "This is a rather large set of bugfixes, as we just returned from the
  Christmas break. Most of these are relatively unimportant fixes for
  regressions introduced during the merge window, and about half of the
  changes are for mach-omap2.

  A couple of patches are just cleanups and dead code removal that I
  would not normally have considered for merging after -rc2, but I
  decided to take them along with the fixes this time.

  Notable fixes include:

   - removing the skeleton.dtsi include broke a number of machines, and
     we have to put empty /chosen nodes back to be able to pass kernel
     command lines as before

   - enabling Samsung platforms no longer hardwires CONFIG_HZ to 200, as
     it had been for no good reason for a long time"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits)
  MAINTAINERS: extend PSCI entry to cover the newly add PSCI checker code
  drivers: psci: annotate timer on stack to silence odebug messages
  ARM64: defconfig: enable DRM_MESON as module
  ARM64: dts: meson-gx: Add Graphic Controller nodes
  ARM64: dts: meson-gxl: fix GPIO include
  ARM: dts: imx6: Disable "weim" node in the dtsi files
  ARM: dts: qcom: apq8064: Add missing scm clock
  ARM: davinci: da8xx: Fix sleeping function called from invalid context
  ARM: davinci: Make __clk_{enable,disable} functions public
  ARM: davinci: da850: don't add emac clock to lookup table twice
  ARM: davinci: da850: fix infinite loop in clk_set_rate()
  ARM: i.MX: remove map_io callback
  ARM: dts: vf610-zii-dev-rev-b: Add missing newline
  ARM: dts: imx6qdl-nitrogen6x: remove duplicate iomux entry
  ARM: dts: imx31: fix AVIC base address
  ARM: dts: am572x-idk: Add gpios property to control PCIE_RESETn
  arm64: dts: vexpress: Support GICC_DIR operations
  ARM: dts: vexpress: Support GICC_DIR operations
  firmware: arm_scpi: fix reading sensor values on pre-1.0 SCPI firmwares
  arm64: dts: msm8996: Add required memory carveouts
  ...
This commit is contained in:
Linus Torvalds 2017-01-05 10:32:16 -08:00
parent 383378d115 1b9ec81258
commit b400792732
58 changed files with 334 additions and 296 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
View File

@ -8,8 +8,9 @@ This driver provides a simple power button event via an Interrupt.
Required properties:
- compatible: should be "ti,tps65217-pwrbutton" or "ti,tps65218-pwrbutton"
Required properties for TPS65218:
Required properties:
- interrupts: should be one of the following
- <2>: For controllers compatible with tps65217
- <3 IRQ_TYPE_EDGE_BOTH>: For controllers compatible with tps65218
Examples:
@ -17,6 +18,7 @@ Examples:
&tps {
tps65217-pwrbutton {
compatible = "ti,tps65217-pwrbutton";
interrupts = <2>;
};
};

7
Documentation/devicetree/bindings/power/supply/tps65217_charger.txt
View File

@ -2,11 +2,16 @@ TPS65217 Charger
Required Properties:
-compatible: "ti,tps65217-charger"
-interrupts: TPS65217 interrupt numbers for the AC and USB charger input change.
Should be <0> for the USB charger and <1> for the AC adapter.
-interrupt-names: Should be "USB" and "AC"
This node is a subnode of the tps65217 PMIC.
Example:
tps65217-charger {
compatible = "ti,tps65090-charger";
compatible = "ti,tps65217-charger";
interrupts = <0>, <1>;
interrupt-names = "USB", "AC";
};

2
MAINTAINERS
View File

@ -9849,7 +9849,7 @@ M: Mark Rutland <mark.rutland@arm.com>
M: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
L: linux-arm-kernel@lists.infradead.org
S: Maintained
F: drivers/firmware/psci.c
F: drivers/firmware/psci*.c
F: include/linux/psci.h
F: include/uapi/linux/psci.h

3
arch/arm/Kconfig
View File

@ -1502,8 +1502,7 @@ source kernel/Kconfig.preempt
config HZ_FIXED
int
default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
ARCH_S5PV210 || ARCH_EXYNOS4
default 200 if ARCH_EBSA110
default 128 if SOC_AT91RM9200
default 0

1
arch/arm/boot/dts/Makefile
View File

@ -501,6 +501,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
am3517-evm.dtb \
am3517_mt_ventoux.dtb \
logicpd-torpedo-37xx-devkit.dtb \
logicpd-som-lv-37xx-devkit.dtb \
omap3430-sdp.dtb \
omap3-beagle.dtb \
omap3-beagle-xm.dtb \

8
arch/arm/boot/dts/am335x-bone-common.dtsi
View File

@ -6,8 +6,6 @@
* published by the Free Software Foundation.
*/
#include <dt-bindings/mfd/tps65217.h>
/ {
cpus {
cpu@0 {
@ -319,13 +317,13 @@
ti,pmic-shutdown-controller;
charger {
interrupts = <TPS65217_IRQ_AC>, <TPS65217_IRQ_USB>;
interrupts-names = "AC", "USB";
interrupts = <0>, <1>;
interrupt-names = "USB", "AC";
status = "okay";
};
pwrbutton {
interrupts = <TPS65217_IRQ_PB>;
interrupts = <2>;
status = "okay";
};

1
arch/arm/boot/dts/am33xx.dtsi
View File

@ -16,6 +16,7 @@
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <1>;
chosen { };
aliases {
i2c0 = &i2c0;

1
arch/arm/boot/dts/am4372.dtsi
View File

@ -16,6 +16,7 @@
interrupt-parent = <&wakeupgen>;
#address-cells = <1>;
#size-cells = <1>;
chosen { };
memory@0 {
device_type = "memory";

10
arch/arm/boot/dts/am571x-idk.dts
View File

@ -62,11 +62,6 @@
linux,default-trigger = "mmc0";
};
};
extcon_usb2: extcon_usb2 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
};
};
&mmc1 {
@ -79,3 +74,8 @@
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
&extcon_usb2 {
id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
};

14
arch/arm/boot/dts/am572x-idk.dts
View File

@ -23,11 +23,6 @@
reg = <0x0 0x80000000 0x0 0x80000000>;
};
extcon_usb2: extcon_usb2 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
};
status-leds {
compatible = "gpio-leds";
cpu0-led {
@ -76,6 +71,11 @@
extcon = <&extcon_usb2>;
};
&extcon_usb2 {
id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
};
&mmc1 {
status = "okay";
vmmc-supply = <&v3_3d>;
@ -87,3 +87,7 @@
&sn65hvs882 {
load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
};
&pcie1 {
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};

9
arch/arm/boot/dts/am57xx-idk-common.dtsi
View File

@ -303,6 +303,13 @@
gpio-controller;
#gpio-cells = <2>;
};
extcon_usb2: tps659038_usb {
compatible = "ti,palmas-usb-vid";
ti,enable-vbus-detection;
ti,enable-id-detection;
/* ID & VBUS GPIOs provided in board dts */
};
};
};
@ -369,7 +376,7 @@
};
&usb2 {
dr_mode = "otg";
dr_mode = "peripheral";
};
&mmc2 {

1
arch/arm/boot/dts/dm814x.dtsi
View File

@ -12,6 +12,7 @@
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <1>;
chosen { };
aliases {
i2c0 = &i2c1;

1
arch/arm/boot/dts/dm816x.dtsi
View File

@ -12,6 +12,7 @@
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <1>;
chosen { };
aliases {
i2c0 = &i2c1;

1
arch/arm/boot/dts/dra7.dtsi
View File

@ -18,6 +18,7 @@
compatible = "ti,dra7xx";
interrupt-parent = <&crossbar_mpu>;
chosen { };
aliases {
i2c0 = &i2c1;

16
arch/arm/boot/dts/dra72-evm-tps65917.dtsi
View File

@ -132,3 +132,19 @@
ti,palmas-long-press-seconds = <6>;
};
};
&usb2_phy1 {
phy-supply = <&ldo4_reg>;
};
&usb2_phy2 {
phy-supply = <&ldo4_reg>;
};
&dss {
vdda_video-supply = <&ldo5_reg>;
};
&mmc1 {
vmmc_aux-supply = <&ldo1_reg>;
};

4
arch/arm/boot/dts/imx31.dtsi
View File

@ -31,11 +31,11 @@
};
};
avic: avic-interrupt-controller@60000000 {
avic: interrupt-controller@68000000 {
compatible = "fsl,imx31-avic", "fsl,avic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x60000000 0x100000>;
reg = <0x68000000 0x100000>;
};
soc {

1
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
View File

@ -533,7 +533,6 @@
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0
>;
};

1
arch/arm/boot/dts/imx6qdl.dtsi
View File

@ -1100,6 +1100,7 @@
interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_EIM_SLOW>;
fsl,weim-cs-gpr = <&gpr>;
status = "disabled";
};
ocotp: ocotp@021bc000 {

1
arch/arm/boot/dts/imx6sl.dtsi
View File

@ -900,6 +900,7 @@
reg = <0x021b8000 0x4000>;
interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
fsl,weim-cs-gpr = <&gpr>;
status = "disabled";
};
ocotp: ocotp@021bc000 {

1
arch/arm/boot/dts/imx6sx.dtsi
View File

@ -977,6 +977,7 @@
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
fsl,weim-cs-gpr = <&gpr>;
status = "disabled";
};
ocotp: ocotp@021bc000 {

1
arch/arm/boot/dts/omap2.dtsi
View File

@ -17,6 +17,7 @@
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <1>;
chosen { };
aliases {
serial0 = &uart1;

2
arch/arm/boot/dts/omap3-n900.dts
View File

@ -734,6 +734,8 @@
vmmc_aux-supply = <&vsim>;
bus-width = <8>;
non-removable;
no-sdio;
no-sd;
};
&mmc3 {

1
arch/arm/boot/dts/omap3.dtsi
View File

@ -17,6 +17,7 @@
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <1>;
chosen { };
aliases {
i2c0 = &i2c1;

1
arch/arm/boot/dts/omap4.dtsi
View File

@ -15,6 +15,7 @@
interrupt-parent = <&wakeupgen>;
#address-cells = <1>;
#size-cells = <1>;
chosen { };
aliases {
i2c0 = &i2c1;

1
arch/arm/boot/dts/omap5.dtsi
View File

@ -17,6 +17,7 @@
compatible = "ti,omap5";
interrupt-parent = <&wakeupgen>;
chosen { };
aliases {
i2c0 = &i2c1;

4
arch/arm/boot/dts/qcom-apq8064.dtsi
View File

@ -4,6 +4,7 @@
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@ -303,6 +304,9 @@
firmware {
scm {
compatible = "qcom,scm-apq8064";
clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
clock-names = "core";
};
};

2
arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
View File

@ -81,7 +81,7 @@
#address-cells = <0>;
interrupt-controller;
reg = <0 0x2c001000 0 0x1000>,
<0 0x2c002000 0 0x1000>,
<0 0x2c002000 0 0x2000>,
<0 0x2c004000 0 0x2000>,
<0 0x2c006000 0 0x2000>;
interrupts = <1 9 0xf04>;

2
arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
View File

@ -131,7 +131,7 @@
#address-cells = <0>;
interrupt-controller;
reg = <0 0x2c001000 0 0x1000>,
<0 0x2c002000 0 0x1000>,
<0 0x2c002000 0 0x2000>,
<0 0x2c004000 0 0x2000>,
<0 0x2c006000 0 0x2000>;
interrupts = <1 9 0xf04>;

3
arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
View File

@ -153,7 +153,8 @@
switch0phy1: switch1phy0@1 {
reg = <1>;
interrupt-parent = <&switch0>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; };
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
};
switch0phy2: switch1phy0@2 {
reg = <2>;
interrupt-parent = <&switch0>;

12
arch/arm/mach-davinci/clock.c
View File

@ -31,10 +31,10 @@ static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
static DEFINE_SPINLOCK(clockfw_lock);
static void __clk_enable(struct clk *clk)
void davinci_clk_enable(struct clk *clk)
{
if (clk->parent)
__clk_enable(clk->parent);
davinci_clk_enable(clk->parent);
if (clk->usecount++ == 0) {
if (clk->flags & CLK_PSC)
davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
@ -44,7 +44,7 @@ static void __clk_enable(struct clk *clk)
}
}
static void __clk_disable(struct clk *clk)
void davinci_clk_disable(struct clk *clk)
{
if (WARN_ON(clk->usecount == 0))
return;
@ -56,7 +56,7 @@ static void __clk_disable(struct clk *clk)
clk->clk_disable(clk);
}
if (clk->parent)
__clk_disable(clk->parent);
davinci_clk_disable(clk->parent);
}
int davinci_clk_reset(struct clk *clk, bool reset)
@ -103,7 +103,7 @@ int clk_enable(struct clk *clk)
return -EINVAL;
spin_lock_irqsave(&clockfw_lock, flags);
__clk_enable(clk);
davinci_clk_enable(clk);
spin_unlock_irqrestore(&clockfw_lock, flags);
return 0;
@ -118,7 +118,7 @@ void clk_disable(struct clk *clk)
return;
spin_lock_irqsave(&clockfw_lock, flags);
__clk_disable(clk);
davinci_clk_disable(clk);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
EXPORT_SYMBOL(clk_disable);

2
arch/arm/mach-davinci/clock.h
View File

@ -132,6 +132,8 @@ int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate);
int davinci_set_refclk_rate(unsigned long rate);
int davinci_simple_set_rate(struct clk *clk, unsigned long rate);
int davinci_clk_reset(struct clk *clk, bool reset);
void davinci_clk_enable(struct clk *clk);
void davinci_clk_disable(struct clk *clk);
extern struct platform_device davinci_wdt_device;
extern void davinci_watchdog_reset(struct platform_device *);

32
arch/arm/mach-davinci/da850.c
View File

@ -319,6 +319,16 @@ static struct clk emac_clk = {
.gpsc = 1,
};
/*
* In order to avoid adding the emac_clk to the clock lookup table twice (and
* screwing up the linked list in the process) create a separate clock for
* mdio inheriting the rate from emac_clk.
*/
static struct clk mdio_clk = {
.name = "mdio",
.parent = &emac_clk,
};
static struct clk mcasp_clk = {
.name = "mcasp",
.parent = &async3_clk,
@ -367,6 +377,16 @@ static struct clk aemif_clk = {
.flags = ALWAYS_ENABLED,
};
/*
* In order to avoid adding the aemif_clk to the clock lookup table twice (and
* screwing up the linked list in the process) create a separate clock for
* nand inheriting the rate from aemif_clk.
*/
static struct clk aemif_nand_clk = {
.name = "nand",
.parent = &aemif_clk,
};
static struct clk usb11_clk = {
.name = "usb11",
.parent = &pll0_sysclk4,
@ -529,7 +549,7 @@ static struct clk_lookup da850_clks[] = {
CLK(NULL, "arm", &arm_clk),
CLK(NULL, "rmii", &rmii_clk),
CLK("davinci_emac.1", NULL, &emac_clk),
CLK("davinci_mdio.0", "fck", &emac_clk),
CLK("davinci_mdio.0", "fck", &mdio_clk),
CLK("davinci-mcasp.0", NULL, &mcasp_clk),
CLK("davinci-mcbsp.0", NULL, &mcbsp0_clk),
CLK("davinci-mcbsp.1", NULL, &mcbsp1_clk),
@ -537,7 +557,15 @@ static struct clk_lookup da850_clks[] = {
CLK("da830-mmc.0", NULL, &mmcsd0_clk),
CLK("da830-mmc.1", NULL, &mmcsd1_clk),
CLK("ti-aemif", NULL, &aemif_clk),
CLK(NULL, "aemif", &aemif_clk),
/*
* The only user of this clock is davinci_nand and it get's it through
* con_id. The nand node itself is created from within the aemif
* driver to guarantee that it's probed after the aemif timing
* parameters are configured. of_dev_auxdata is not accessible from
* the aemif driver and can't be passed to of_platform_populate(). For
* that reason we're leaving the dev_id here as NULL.
*/
CLK(NULL, "aemif", &aemif_nand_clk),
CLK("ohci-da8xx", "usb11", &usb11_clk),
CLK("musb-da8xx", "usb20", &usb20_clk),
CLK("spi_davinci.0", NULL, &spi0_clk),

34
arch/arm/mach-davinci/usb-da8xx.c
View File

@ -22,6 +22,8 @@
#define DA8XX_USB0_BASE 0x01e00000
#define DA8XX_USB1_BASE 0x01e25000
static struct clk *usb20_clk;
static struct platform_device da8xx_usb_phy = {
.name = "da8xx-usb-phy",
.id = -1,
@ -158,26 +160,13 @@ int __init da8xx_register_usb_refclkin(int rate)
static void usb20_phy_clk_enable(struct clk *clk)
{
struct clk *usb20_clk;
int err;
u32 val;
u32 timeout = 500000; /* 500 msec */
val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20");
if (IS_ERR(usb20_clk)) {
pr_err("could not get usb20 clk: %ld\n", PTR_ERR(usb20_clk));
return;
}
/* The USB 2.O PLL requires that the USB 2.O PSC is enabled as well. */
err = clk_prepare_enable(usb20_clk);
if (err) {
pr_err("failed to enable usb20 clk: %d\n", err);
clk_put(usb20_clk);
return;
}
davinci_clk_enable(usb20_clk);
/*
* Turn on the USB 2.0 PHY, but just the PLL, and not OTG. The USB 1.1
@ -197,8 +186,7 @@ static void usb20_phy_clk_enable(struct clk *clk)
pr_err("Timeout waiting for USB 2.0 PHY clock good\n");
done:
clk_disable_unprepare(usb20_clk);
clk_put(usb20_clk);
davinci_clk_disable(usb20_clk);
}
static void usb20_phy_clk_disable(struct clk *clk)
@ -285,11 +273,19 @@ static struct clk_lookup usb20_phy_clk_lookup =
int __init da8xx_register_usb20_phy_clk(bool use_usb_refclkin)
{
struct clk *parent;
int ret = 0;
int ret;
usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20");
ret = PTR_ERR_OR_ZERO(usb20_clk);
if (ret)
return ret;
parent = clk_get(NULL, use_usb_refclkin ? "usb_refclkin" : "pll0_aux");
if (IS_ERR(parent))
return PTR_ERR(parent);
ret = PTR_ERR_OR_ZERO(parent);
if (ret) {
clk_put(usb20_clk);
return ret;
}
usb20_phy_clk.parent = parent;
ret = clk_register(&usb20_phy_clk);

31
arch/arm/mach-exynos/platsmp.c
View File

@ -385,36 +385,6 @@ fail:
return pen_release != -1 ? ret : 0;
}
/*
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
static void __init exynos_smp_init_cpus(void)
{
void __iomem *scu_base = scu_base_addr();
unsigned int i, ncores;
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
ncores = scu_base ? scu_get_core_count(scu_base) : 1;
else
/*
* CPU Nodes are passed thru DT and set_cpu_possible
* is set by "arm_dt_init_cpu_maps".
*/
return;
/* sanity check */
if (ncores > nr_cpu_ids) {
pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
ncores, nr_cpu_ids);
ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
}
static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
{
int i;
@ -479,7 +449,6 @@ static void exynos_cpu_die(unsigned int cpu)
#endif /* CONFIG_HOTPLUG_CPU */
const struct smp_operations exynos_smp_ops __initconst = {
.smp_init_cpus = exynos_smp_init_cpus,
.smp_prepare_cpus = exynos_smp_prepare_cpus,
.smp_secondary_init = exynos_secondary_init,
.smp_boot_secondary = exynos_boot_secondary,

1
arch/arm/mach-imx/mach-imx1.c
View File

@ -37,7 +37,6 @@ static const char * const imx1_dt_board_compat[] __initconst = {
};
DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)")
.map_io = debug_ll_io_init,
.init_early = imx1_init_early,
.init_irq = imx1_init_irq,
.dt_compat = imx1_dt_board_compat,

2
arch/arm/mach-omap2/Makefile
View File

@ -7,7 +7,7 @@ ccflags-y := -I$(srctree)/$(src)/include \
# Common support
obj-y := id.o io.o control.o devices.o fb.o timer.o pm.o \
common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
common.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
omap_device.o omap-headsmp.o sram.o drm.o
hwmod-common = omap_hwmod.o omap_hwmod_reset.o \

2
arch/arm/mach-omap2/board-generic.c
View File

@ -304,7 +304,7 @@ DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)")
.init_late = am43xx_init_late,
.init_irq = omap_gic_of_init,
.init_machine = omap_generic_init,
.init_time = omap4_local_timer_init,
.init_time = omap3_gptimer_timer_init,
.dt_compat = am43_boards_compat,
.restart = omap44xx_restart,
MACHINE_END

160
arch/arm/mach-omap2/gpio.c
View File

@ -1,160 +0,0 @@
/*
* OMAP2+ specific gpio initialization
*
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
*
* Author:
* Charulatha V <charu@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/gpio.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/of.h>
#include <linux/platform_data/gpio-omap.h>
#include "soc.h"
#include "omap_hwmod.h"
#include "omap_device.h"
#include "omap-pm.h"
#include "powerdomain.h"
static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
{
struct platform_device *pdev;
struct omap_gpio_platform_data *pdata;
struct omap_gpio_dev_attr *dev_attr;
char *name = "omap_gpio";
int id;
struct powerdomain *pwrdm;
/*
* extract the device id from name field available in the
* hwmod database and use the same for constructing ids for
* gpio devices.
* CAUTION: Make sure the name in the hwmod database does
* not change. If changed, make corresponding change here
* or make use of static variable mechanism to handle this.
*/
sscanf(oh->name, "gpio%d", &id);
pdata = kzalloc(sizeof(struct omap_gpio_platform_data), GFP_KERNEL);
if (!pdata) {
pr_err("gpio%d: Memory allocation failed\n", id);
return -ENOMEM;
}
dev_attr = (struct omap_gpio_dev_attr *)oh->dev_attr;
pdata->bank_width = dev_attr->bank_width;
pdata->dbck_flag = dev_attr->dbck_flag;
pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
if (!pdata->regs) {
pr_err("gpio%d: Memory allocation failed\n", id);
kfree(pdata);
return -ENOMEM;
}
switch (oh->class->rev) {
case 0:
if (id == 1)
/* non-wakeup GPIO pins for OMAP2 Bank1 */
pdata->non_wakeup_gpios = 0xe203ffc0;
else if (id == 2)
/* non-wakeup GPIO pins for OMAP2 Bank2 */
pdata->non_wakeup_gpios = 0x08700040;
/* fall through */
case 1:
pdata->regs->revision = OMAP24XX_GPIO_REVISION;
pdata->regs->direction = OMAP24XX_GPIO_OE;
pdata->regs->datain = OMAP24XX_GPIO_DATAIN;
pdata->regs->dataout = OMAP24XX_GPIO_DATAOUT;
pdata->regs->set_dataout = OMAP24XX_GPIO_SETDATAOUT;
pdata->regs->clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT;
pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1;
pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2;
pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1;
pdata->regs->irqenable2 = OMAP24XX_GPIO_IRQENABLE2;
pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1;
pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1;
pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL;
pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN;
pdata->regs->ctrl = OMAP24XX_GPIO_CTRL;
pdata->regs->wkup_en = OMAP24XX_GPIO_WAKE_EN;
pdata->regs->leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0;
pdata->regs->leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1;
pdata->regs->risingdetect = OMAP24XX_GPIO_RISINGDETECT;
pdata->regs->fallingdetect = OMAP24XX_GPIO_FALLINGDETECT;
break;
case 2:
pdata->regs->revision = OMAP4_GPIO_REVISION;
pdata->regs->direction = OMAP4_GPIO_OE;
pdata->regs->datain = OMAP4_GPIO_DATAIN;
pdata->regs->dataout = OMAP4_GPIO_DATAOUT;
pdata->regs->set_dataout = OMAP4_GPIO_SETDATAOUT;
pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT;
pdata->regs->irqstatus_raw0 = OMAP4_GPIO_IRQSTATUSRAW0;
pdata->regs->irqstatus_raw1 = OMAP4_GPIO_IRQSTATUSRAW1;
pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0;
pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1;
pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0;
pdata->regs->irqenable2 = OMAP4_GPIO_IRQSTATUSSET1;
pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0;
pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0;
pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME;
pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE;
pdata->regs->ctrl = OMAP4_GPIO_CTRL;
pdata->regs->wkup_en = OMAP4_GPIO_IRQWAKEN0;
pdata->regs->leveldetect0 = OMAP4_GPIO_LEVELDETECT0;
pdata->regs->leveldetect1 = OMAP4_GPIO_LEVELDETECT1;
pdata->regs->risingdetect = OMAP4_GPIO_RISINGDETECT;
pdata->regs->fallingdetect = OMAP4_GPIO_FALLINGDETECT;
break;
default:
WARN(1, "Invalid gpio bank_type\n");
kfree(pdata->regs);
kfree(pdata);
return -EINVAL;
}
pwrdm = omap_hwmod_get_pwrdm(oh);
pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm);
pdev = omap_device_build(name, id - 1, oh, pdata, sizeof(*pdata));
kfree(pdata);
if (IS_ERR(pdev)) {
WARN(1, "Can't build omap_device for %s:%s.\n",
name, oh->name);
return PTR_ERR(pdev);
}
return 0;
}
/*
* gpio_init needs to be done before
* machine_init functions access gpio APIs.
* Hence gpio_init is a omap_postcore_initcall.
*/
static int __init omap2_gpio_init(void)
{
/* If dtb is there, the devices will be created dynamically */
if (of_have_populated_dt())
return -ENODEV;
return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init, NULL);
}
omap_postcore_initcall(omap2_gpio_init);

8
arch/arm/mach-omap2/omap_hwmod.c
View File

@ -741,14 +741,14 @@ static int _init_main_clk(struct omap_hwmod *oh)
int ret = 0;
char name[MOD_CLK_MAX_NAME_LEN];
struct clk *clk;
static const char modck[] = "_mod_ck";
/* +7 magic comes from '_mod_ck' suffix */
if (strlen(oh->name) + 7 > MOD_CLK_MAX_NAME_LEN)
if (strlen(oh->name) >= MOD_CLK_MAX_NAME_LEN - strlen(modck))
pr_warn("%s: warning: cropping name for %s\n", __func__,
oh->name);
strncpy(name, oh->name, MOD_CLK_MAX_NAME_LEN - 7);
strcat(name, "_mod_ck");
strlcpy(name, oh->name, MOD_CLK_MAX_NAME_LEN - strlen(modck));
strlcat(name, modck, MOD_CLK_MAX_NAME_LEN);
clk = clk_get(NULL, name);
if (!IS_ERR(clk)) {

4
arch/arm/mach-omap2/omap_hwmod_common_data.h
View File

@ -121,10 +121,6 @@ extern struct omap_hwmod_irq_info omap2_uart3_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_dispc_irqs[];
extern struct omap_hwmod_irq_info omap2_i2c1_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_i2c2_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_gpio1_irqs[];
extern struct omap_hwmod_irq_info omap2_gpio2_irqs[];
extern struct omap_hwmod_irq_info omap2_gpio3_irqs[];
extern struct omap_hwmod_irq_info omap2_gpio4_irqs[];
extern struct omap_hwmod_irq_info omap2_dma_system_irqs[];
extern struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[];

4
arch/arm/mach-omap2/prm_common.c
View File

@ -295,10 +295,8 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
GFP_KERNEL);
if (!prcm_irq_chips || !prcm_irq_setup->saved_mask ||
!prcm_irq_setup->priority_mask) {
pr_err("PRCM: kzalloc failed\n");
!prcm_irq_setup->priority_mask)
goto err;
}
memset(mask, 0, sizeof(mask));

9
arch/arm/mach-omap2/timer.c
View File

@ -510,18 +510,19 @@ void __init omap3_secure_sync32k_timer_init(void)
}
#endif /* CONFIG_ARCH_OMAP3 */
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX)
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \
defined(CONFIG_SOC_AM43XX)
void __init omap3_gptimer_timer_init(void)
{
__omap_sync32k_timer_init(2, "timer_sys_ck", NULL,
1, "timer_sys_ck", "ti,timer-alwon", true);
clocksource_probe();
if (of_have_populated_dt())
clocksource_probe();
}
#endif
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
defined(CONFIG_SOC_DRA7XX)
static void __init omap4_sync32k_timer_init(void)
{
__omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon",

76
arch/arm/mach-s3c24xx/common.c
View File

@ -345,10 +345,40 @@ static struct s3c24xx_dma_channel s3c2410_dma_channels[DMACH_MAX] = {
[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
};
static const struct dma_slave_map s3c2410_dma_slave_map[] = {
{ "s3c2410-sdi", "rx-tx", (void *)DMACH_SDI },
{ "s3c2410-spi.0", "rx", (void *)DMACH_SPI0_RX },
{ "s3c2410-spi.0", "tx", (void *)DMACH_SPI0_TX },
{ "s3c2410-spi.1", "rx", (void *)DMACH_SPI1_RX },
{ "s3c2410-spi.1", "tx", (void *)DMACH_SPI1_TX },
/*
* The DMA request source[1] (DMACH_UARTx_SRC2) are
* not used in the UART driver.
*/
{ "s3c2410-uart.0", "rx", (void *)DMACH_UART0 },
{ "s3c2410-uart.0", "tx", (void *)DMACH_UART0 },
{ "s3c2410-uart.1", "rx", (void *)DMACH_UART1 },
{ "s3c2410-uart.1", "tx", (void *)DMACH_UART1 },
{ "s3c2410-uart.2", "rx", (void *)DMACH_UART2 },
{ "s3c2410-uart.2", "tx", (void *)DMACH_UART2 },
{ "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
{ "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
{ "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
{ "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
{ "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
{ "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
{ "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
{ "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
{ "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
{ "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
};
static struct s3c24xx_dma_platdata s3c2410_dma_platdata = {
.num_phy_channels = 4,
.channels = s3c2410_dma_channels,
.num_channels = DMACH_MAX,
.slave_map = s3c2410_dma_slave_map,
.slavecnt = ARRAY_SIZE(s3c2410_dma_slave_map),
};
struct platform_device s3c2410_device_dma = {
@ -388,10 +418,36 @@ static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = {
[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 },
};
static const struct dma_slave_map s3c2412_dma_slave_map[] = {
{ "s3c2412-sdi", "rx-tx", (void *)DMACH_SDI },
{ "s3c2412-spi.0", "rx", (void *)DMACH_SPI0_RX },
{ "s3c2412-spi.0", "tx", (void *)DMACH_SPI0_TX },
{ "s3c2412-spi.1", "rx", (void *)DMACH_SPI1_RX },
{ "s3c2412-spi.1", "tx", (void *)DMACH_SPI1_TX },
{ "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
{ "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
{ "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
{ "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
{ "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
{ "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
{ "s3c2412-iis", "rx", (void *)DMACH_I2S_IN },
{ "s3c2412-iis", "tx", (void *)DMACH_I2S_OUT },
{ "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
{ "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
{ "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
{ "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
{ "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
{ "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
{ "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
{ "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
};
static struct s3c24xx_dma_platdata s3c2412_dma_platdata = {
.num_phy_channels = 4,
.channels = s3c2412_dma_channels,
.num_channels = DMACH_MAX,
.slave_map = s3c2412_dma_slave_map,
.slavecnt = ARRAY_SIZE(s3c2412_dma_slave_map),
};
struct platform_device s3c2412_device_dma = {
@ -534,10 +590,30 @@ static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = {
[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 },
};
static const struct dma_slave_map s3c2443_dma_slave_map[] = {
{ "s3c2440-sdi", "rx-tx", (void *)DMACH_SDI },
{ "s3c2443-spi.0", "rx", (void *)DMACH_SPI0_RX },
{ "s3c2443-spi.0", "tx", (void *)DMACH_SPI0_TX },
{ "s3c2443-spi.1", "rx", (void *)DMACH_SPI1_RX },
{ "s3c2443-spi.1", "tx", (void *)DMACH_SPI1_TX },
{ "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
{ "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
{ "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
{ "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
{ "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
{ "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
{ "s3c2440-uart.3", "rx", (void *)DMACH_UART3 },
{ "s3c2440-uart.3", "tx", (void *)DMACH_UART3 },
{ "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
{ "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
};
static struct s3c24xx_dma_platdata s3c2443_dma_platdata = {
.num_phy_channels = 6,
.channels = s3c2443_dma_channels,
.num_channels = DMACH_MAX,
.slave_map = s3c2443_dma_slave_map,
.slavecnt = ARRAY_SIZE(s3c2443_dma_slave_map),
};
struct platform_device s3c2443_device_dma = {

16
arch/arm64/boot/dts/amlogic/meson-gx.dtsi
View File

@ -356,5 +356,21 @@
status = "disabled";
};
};
vpu: vpu@d0100000 {
compatible = "amlogic,meson-gx-vpu";
reg = <0x0 0xd0100000 0x0 0x100000>,
<0x0 0xc883c000 0x0 0x1000>,
<0x0 0xc8838000 0x0 0x1000>;
reg-names = "vpu", "hhi", "dmc";
interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
/* CVBS VDAC output port */
cvbs_vdac_port: port@0 {
reg = <0>;
};
};
};
};

16
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
View File

@ -142,6 +142,16 @@
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
cvbs-connector {
compatible = "composite-video-connector";
port {
cvbs_connector_in: endpoint {
remote-endpoint = <&cvbs_vdac_out>;
};
};
};
};
&uart_AO {
@ -229,3 +239,9 @@
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
};
};

16
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
View File

@ -125,6 +125,16 @@
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
cvbs-connector {
compatible = "composite-video-connector";
port {
cvbs_connector_in: endpoint {
remote-endpoint = <&cvbs_vdac_out>;
};
};
};
};
/* This UART is brought out to the DB9 connector */
@ -234,3 +244,9 @@
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
};
};

4
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
View File

@ -506,3 +506,7 @@
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
&vpu {
compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
};

16
arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
View File

@ -117,6 +117,16 @@
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
cvbs-connector {
compatible = "composite-video-connector";
port {
cvbs_connector_in: endpoint {
remote-endpoint = <&cvbs_vdac_out>;
};
};
};
};
&uart_AO {
@ -203,3 +213,9 @@
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
};
};

6
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
View File

@ -43,7 +43,7 @@
#include "meson-gx.dtsi"
#include <dt-bindings/clock/gxbb-clkc.h>
#include <dt-bindings/gpio/meson-gxbb-gpio.h>
#include <dt-bindings/gpio/meson-gxl-gpio.h>
/ {
compatible = "amlogic,meson-gxl";
@ -299,3 +299,7 @@
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
&vpu {
compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
};

16
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
View File

@ -90,6 +90,16 @@
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
cvbs-connector {
compatible = "composite-video-connector";
port {
cvbs_connector_in: endpoint {
remote-endpoint = <&cvbs_vdac_out>;
};
};
};
};
/* This UART is brought out to the DB9 connector */
@ -167,3 +177,9 @@
max-speed = <1000>;
};
};
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
};
};

4
arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
View File

@ -112,3 +112,7 @@
};
};
};
&vpu {
compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
};

2
arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
View File

@ -81,7 +81,7 @@
#address-cells = <0>;
interrupt-controller;
reg = <0x0 0x2c001000 0 0x1000>,
<0x0 0x2c002000 0 0x1000>,
<0x0 0x2c002000 0 0x2000>,
<0x0 0x2c004000 0 0x2000>,
<0x0 0x2c006000 0 0x2000>;
interrupts = <1 9 0xf04>;

10
arch/arm64/boot/dts/qcom/msm8996.dtsi
View File

@ -64,6 +64,16 @@
reg = <0x0 0x86000000 0x0 0x200000>;
no-map;
};
memory@85800000 {
reg = <0x0 0x85800000 0x0 0x800000>;
no-map;
};
memory@86200000 {
reg = <0x0 0x86200000 0x0 0x2600000>;
no-map;
};
};
cpus {

2
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
View File

@ -169,7 +169,7 @@
power-source = <3300>;
};
sdhi0_pins_uhs: sd0 {
sdhi0_pins_uhs: sd0_uhs {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
power-source = <1800>;

1
arch/arm64/configs/defconfig
View File

@ -331,6 +331,7 @@ CONFIG_DRM_VC4=m
CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_DRM_I2C_ADV7511=m
CONFIG_DRM_HISI_KIRIN=m
CONFIG_DRM_MESON=m
CONFIG_FB=y
CONFIG_FB_ARMCLCD=y
CONFIG_BACKLIGHT_GENERIC=m

10
drivers/firmware/arm_scpi.c
View File

@ -721,11 +721,17 @@ static int scpi_sensor_get_value(u16 sensor, u64 *val)
ret = scpi_send_message(CMD_SENSOR_VALUE, &id, sizeof(id),
&buf, sizeof(buf));
if (!ret)
if (ret)
return ret;
if (scpi_info->is_legacy)
/* only 32-bits supported, hi_val can be junk */
*val = le32_to_cpu(buf.lo_val);
else
*val = (u64)le32_to_cpu(buf.hi_val) << 32 |
le32_to_cpu(buf.lo_val);
return ret;
return 0;
}
static int scpi_device_get_power_state(u16 dev_id)

4
drivers/firmware/psci_checker.c
View File

@ -270,8 +270,7 @@ static int suspend_test_thread(void *arg)
struct cpuidle_device *dev;
struct cpuidle_driver *drv;
/* No need for an actual callback, we just want to wake up the CPU. */
struct timer_list wakeup_timer =
TIMER_INITIALIZER(dummy_callback, 0, 0);
struct timer_list wakeup_timer;
/* Wait for the main thread to give the start signal. */
wait_for_completion(&suspend_threads_started);
@ -287,6 +286,7 @@ static int suspend_test_thread(void *arg)
pr_info("CPU %d entering suspend cycles, states 1 through %d\n",
cpu, drv->state_count - 1);
setup_timer_on_stack(&wakeup_timer, dummy_callback, 0);
for (i = 0; i < NUM_SUSPEND_CYCLE; ++i) {
int index;
/*

26
include/dt-bindings/mfd/tps65217.h
View File

@ -1,26 +0,0 @@
/*
* This header provides macros for TI TPS65217 DT bindings.
*
* Copyright (C) 2016 Texas Instruments
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __DT_BINDINGS_TPS65217_H__
#define __DT_BINDINGS_TPS65217_H__
#define TPS65217_IRQ_USB 0
#define TPS65217_IRQ_AC 1
#define TPS65217_IRQ_PB 2
#endif