dt-bindings: i2c: Convert UniPhier I2C controller to json-schema

Convert the UniPhier I2C controller (FIFO-less) binding to DT schema
format.

There are two types of I2C controllers used on the UniPhier platform.
This is the legacy one without FIFO support, which is used on the
sLD8 SoC or older.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
This commit is contained in:
Masahiro Yamada 2020-02-21 11:55:33 +09:00 committed by Rob Herring
parent 4f325e8c83
commit b279cac915
2 changed files with 50 additions and 25 deletions

View File

@ -1,25 +0,0 @@
UniPhier I2C controller (FIFO-less)
Required properties:
- compatible: should be "socionext,uniphier-i2c".
- #address-cells: should be 1.
- #size-cells: should be 0.
- reg: offset and length of the register set for the device.
- interrupts: a single interrupt specifier.
- clocks: phandle to the input clock.
Optional properties:
- clock-frequency: desired I2C bus frequency in Hz. The maximum supported
value is 400000. Defaults to 100000 if not specified.
Examples:
i2c0: i2c@58400000 {
compatible = "socionext,uniphier-i2c";
reg = <0x58400000 0x40>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 41 1>;
clocks = <&i2c_clk>;
clock-frequency = <100000>;
};

View File

@ -0,0 +1,50 @@
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/i2c/socionext,uniphier-i2c.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: UniPhier I2C controller (FIFO-less)
maintainers:
- Masahiro Yamada <yamada.masahiro@socionext.com>
allOf:
- $ref: /schemas/i2c/i2c-controller.yaml#
properties:
compatible:
const: socionext,uniphier-i2c
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
maxItems: 1
clock-frequency:
minimum: 100000
maximum: 400000
required:
- compatible
- reg
- "#address-cells"
- "#size-cells"
- interrupts
- clocks
examples:
- |
i2c0: i2c@58400000 {
compatible = "socionext,uniphier-i2c";
reg = <0x58400000 0x40>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 41 1>;
clocks = <&i2c_clk>;
clock-frequency = <100000>;
};