pwm: imx1: Implement .apply callback
To eventually get rid of all legacy drivers convert this driver to the modern world implementing .apply(). This just pushes down a slightly optimized variant of how legacy drivers are handled in the core. As a side effect this improves the behaviour for big duty cycles where max * duty_ns overflowed before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This commit is contained in:
parent
9136a39e6c
commit
b23fd25ec8
|
@ -61,7 +61,7 @@ static void pwm_imx1_clk_disable_unprepare(struct pwm_chip *chip)
|
|||
}
|
||||
|
||||
static int pwm_imx1_config(struct pwm_chip *chip,
|
||||
struct pwm_device *pwm, int duty_ns, int period_ns)
|
||||
struct pwm_device *pwm, u64 duty_ns, u64 period_ns)
|
||||
{
|
||||
struct pwm_imx1_chip *imx = to_pwm_imx1_chip(chip);
|
||||
u32 max, p;
|
||||
|
@ -84,7 +84,7 @@ static int pwm_imx1_config(struct pwm_chip *chip,
|
|||
* (/2 .. /16).
|
||||
*/
|
||||
max = readl(imx->mmio_base + MX1_PWMP);
|
||||
p = max * duty_ns / period_ns;
|
||||
p = mul_u64_u64_div_u64(max, duty_ns, period_ns);
|
||||
|
||||
writel(max - p, imx->mmio_base + MX1_PWMS);
|
||||
|
||||
|
@ -120,10 +120,33 @@ static void pwm_imx1_disable(struct pwm_chip *chip, struct pwm_device *pwm)
|
|||
pwm_imx1_clk_disable_unprepare(chip);
|
||||
}
|
||||
|
||||
static int pwm_imx1_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
||||
const struct pwm_state *state)
|
||||
{
|
||||
int err;
|
||||
|
||||
if (state->polarity != PWM_POLARITY_NORMAL)
|
||||
return -EINVAL;
|
||||
|
||||
if (!state->enabled) {
|
||||
if (pwm->state.enabled)
|
||||
pwm_imx1_disable(chip, pwm);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
err = pwm_imx1_config(chip, pwm, state->duty_cycle, state->period);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
if (!pwm->state.enabled)
|
||||
return pwm_imx1_enable(chip, pwm);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct pwm_ops pwm_imx1_ops = {
|
||||
.enable = pwm_imx1_enable,
|
||||
.disable = pwm_imx1_disable,
|
||||
.config = pwm_imx1_config,
|
||||
.apply = pwm_imx1_apply,
|
||||
.owner = THIS_MODULE,
|
||||
};
|
||||
|
||||
|
|
Loading…
Reference in New Issue