ASoC: dwc: Read I2S block configuration from registers

The I2S block provides component parameter registers which
describe how the block is instantiated.  Use these registers
to extract the block's configuration rather than relying on
platform data.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Andrew Jackson 2014-12-30 10:55:45 +00:00 committed by Mark Brown
parent a56257c657
commit b226efe581
1 changed files with 86 additions and 10 deletions

View File

@ -54,6 +54,31 @@
#define I2S_COMP_VERSION 0x01F8
#define I2S_COMP_TYPE 0x01FC
/*
* Component parameter register fields - define the I2S block's
* configuration.
*/
#define COMP1_TX_WORDSIZE_3(r) (((r) & GENMASK(27, 25)) >> 25)
#define COMP1_TX_WORDSIZE_2(r) (((r) & GENMASK(24, 22)) >> 22)
#define COMP1_TX_WORDSIZE_1(r) (((r) & GENMASK(21, 19)) >> 19)
#define COMP1_TX_WORDSIZE_0(r) (((r) & GENMASK(18, 16)) >> 16)
#define COMP1_TX_CHANNELS(r) (((r) & GENMASK(10, 9)) >> 9)
#define COMP1_RX_CHANNELS(r) (((r) & GENMASK(8, 7)) >> 7)
#define COMP1_RX_ENABLED(r) (((r) & BIT(6)) >> 6)
#define COMP1_TX_ENABLED(r) (((r) & BIT(5)) >> 5)
#define COMP1_MODE_EN(r) (((r) & BIT(4)) >> 4)
#define COMP1_FIFO_DEPTH_GLOBAL(r) (((r) & GENMASK(3, 2)) >> 2)
#define COMP1_APB_DATA_WIDTH(r) (((r) & GENMASK(1, 0)) >> 0)
#define COMP2_RX_WORDSIZE_3(r) (((r) & GENMASK(12, 10)) >> 10)
#define COMP2_RX_WORDSIZE_2(r) (((r) & GENMASK(9, 7)) >> 7)
#define COMP2_RX_WORDSIZE_1(r) (((r) & GENMASK(5, 3)) >> 3)
#define COMP2_RX_WORDSIZE_0(r) (((r) & GENMASK(2, 0)) >> 0)
/* Number of entries in WORDSIZE and DATA_WIDTH parameter registers */
#define COMP_MAX_WORDSIZE (1 << 3)
#define COMP_MAX_DATA_WIDTH (1 << 2)
#define MAX_CHANNEL_NUM 8
#define MIN_CHANNEL_NUM 2
@ -324,11 +349,50 @@ static int dw_i2s_resume(struct snd_soc_dai *dai)
#define dw_i2s_resume NULL
#endif
static void dw_configure_dai_by_pd(struct dw_i2s_dev *dev,
/*
* The following tables allow a direct lookup of various parameters
* defined in the I2S block's configuration in terms of sound system
* parameters. Each table is sized to the number of entries possible
* according to the number of configuration bits describing an I2S
* block parameter.
*/
/* Width of (DMA) bus */
static const u32 bus_widths[COMP_MAX_DATA_WIDTH] = {
DMA_SLAVE_BUSWIDTH_1_BYTE,
DMA_SLAVE_BUSWIDTH_2_BYTES,
DMA_SLAVE_BUSWIDTH_4_BYTES,
DMA_SLAVE_BUSWIDTH_UNDEFINED
};
/* PCM format to support channel resolution */
static const u32 formats[COMP_MAX_WORDSIZE] = {
SNDRV_PCM_FMTBIT_S16_LE,
SNDRV_PCM_FMTBIT_S16_LE,
SNDRV_PCM_FMTBIT_S24_LE,
SNDRV_PCM_FMTBIT_S24_LE,
SNDRV_PCM_FMTBIT_S32_LE,
0,
0,
0
};
static int dw_configure_dai_by_pd(struct dw_i2s_dev *dev,
struct snd_soc_dai_driver *dw_i2s_dai,
struct resource *res,
const struct i2s_platform_data *pdata)
{
/*
* Read component parameter registers to extract
* the I2S block's configuration.
*/
u32 comp1 = i2s_read_reg(dev->i2s_base, I2S_COMP_PARAM_1);
u32 comp2 = i2s_read_reg(dev->i2s_base, I2S_COMP_PARAM_2);
u32 idx = COMP1_APB_DATA_WIDTH(comp1);
if (WARN_ON(idx >= ARRAY_SIZE(bus_widths)))
return -EINVAL;
/* Set DMA slaves info */
dev->play_dma_data.data = pdata->play_dma_data;
@ -337,26 +401,36 @@ static void dw_configure_dai_by_pd(struct dw_i2s_dev *dev,
dev->capture_dma_data.addr = res->start + I2S_RXDMA;
dev->play_dma_data.max_burst = 16;
dev->capture_dma_data.max_burst = 16;
dev->play_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
dev->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
dev->play_dma_data.addr_width = bus_widths[idx];
dev->capture_dma_data.addr_width = bus_widths[idx];
dev->play_dma_data.filter = pdata->filter;
dev->capture_dma_data.filter = pdata->filter;
if (pdata->cap & DWC_I2S_PLAY) {
if (COMP1_TX_ENABLED(comp1)) {
dev_dbg(dev->dev, " designware: play supported\n");
idx = COMP1_TX_WORDSIZE_0(comp1);
if (WARN_ON(idx >= ARRAY_SIZE(formats)))
return -EINVAL;
dw_i2s_dai->playback.channels_min = MIN_CHANNEL_NUM;
dw_i2s_dai->playback.channels_max = pdata->channel;
dw_i2s_dai->playback.formats = pdata->snd_fmts;
dw_i2s_dai->playback.channels_max =
1 << (COMP1_TX_CHANNELS(comp1) + 1);
dw_i2s_dai->playback.formats = formats[idx];
dw_i2s_dai->playback.rates = pdata->snd_rates;
}
if (pdata->cap & DWC_I2S_RECORD) {
if (COMP1_RX_ENABLED(comp1)) {
dev_dbg(dev->dev, "designware: record supported\n");
idx = COMP2_RX_WORDSIZE_0(comp2);
if (WARN_ON(idx >= ARRAY_SIZE(formats)))
return -EINVAL;
dw_i2s_dai->capture.channels_min = MIN_CHANNEL_NUM;
dw_i2s_dai->capture.channels_max = pdata->channel;
dw_i2s_dai->capture.formats = pdata->snd_fmts;
dw_i2s_dai->capture.channels_max =
1 << (COMP1_RX_CHANNELS(comp1) + 1);
dw_i2s_dai->capture.formats = formats[idx];
dw_i2s_dai->capture.rates = pdata->snd_rates;
}
return 0;
}
static int dw_i2s_probe(struct platform_device *pdev)
@ -392,7 +466,9 @@ static int dw_i2s_probe(struct platform_device *pdev)
return PTR_ERR(dev->i2s_base);
dev->dev = &pdev->dev;
dw_configure_dai_by_pd(dev, dw_i2s_dai, res, pdata);
ret = dw_configure_dai_by_pd(dev, dw_i2s_dai, res, pdata);
if (ret < 0)
return ret;
dev->capability = pdata->cap;
dev->i2s_clk_cfg = pdata->i2s_clk_cfg;