From b16c310115f2084b8826a35b77ef42bab6786d9f Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Mon, 3 Apr 2023 15:30:54 +0200 Subject: [PATCH] pwm: mtk-disp: Configure double buffering before reading in .get_state() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The DISP_PWM controller's default behavior is to always use register double buffering: all reads/writes are then performed on shadow registers instead of working registers and this becomes an issue in case our chosen configuration in Linux is different from the default (or from the one that was pre-applied by the bootloader). An example of broken behavior is when the controller is configured to use shadow registers, but this driver wants to configure it otherwise: what happens is that the .get_state() callback is called right after registering the pwmchip and checks whether the PWM is enabled by reading the DISP_PWM_EN register; At this point, if shadow registers are enabled but their content was not committed before booting Linux, we are *not* reading the current PWM enablement status, leading to the kernel knowing that the hardware is actually enabled when, in reality, it's not. The aforementioned issue emerged since this driver was fixed with commit 0b5ef3429d8f ("pwm: mtk-disp: Fix the parameters calculated by the enabled flag of disp_pwm") making it to read the enablement status from the right register. Configure the controller in the .get_state() callback to avoid this desync issue and get the backlight properly working again. Fixes: 3f2b16734914 ("pwm: mtk-disp: Implement atomic API .get_state()") Signed-off-by: AngeloGioacchino Del Regno Reviewed-by: Nícolas F. R. A. Prado Tested-by: Nícolas F. R. A. Prado Reviewed-by: Alexandre Mergnat Tested-by: Alexandre Mergnat Signed-off-by: Thierry Reding --- drivers/pwm/pwm-mtk-disp.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c index ea361976eb34..79e321e96f56 100644 --- a/drivers/pwm/pwm-mtk-disp.c +++ b/drivers/pwm/pwm-mtk-disp.c @@ -196,6 +196,16 @@ static int mtk_disp_pwm_get_state(struct pwm_chip *chip, return err; } + /* + * Apply DISP_PWM_DEBUG settings to choose whether to enable or disable + * registers double buffer and manual commit to working register before + * performing any read/write operation + */ + if (mdp->data->bls_debug) + mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug, + mdp->data->bls_debug_mask, + mdp->data->bls_debug_mask); + rate = clk_get_rate(mdp->clk_main); con0 = readl(mdp->base + mdp->data->con0); con1 = readl(mdp->base + mdp->data->con1);