UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

ARM: dts: imx6sx-udoo-neo: enable i2c-2 and i2c-4 for onboard sensors 

The i2c2 bus has a external plug which enables the easy connection of external
"bricks" with sensors of various kinds, while i2c4 on the Extended/Full boards
has a pair of on board motion sensors, accelerometer and magnetometer on one chip
and gyroscope on another so it makes sense to enable these i2c buses for use.
Tested on UDOO Neo Full.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Peter Robinson 2019-06-01 08:07:17 +01:00 committed by Shawn Guo
parent 8fd4f28775
commit b1368b58ac
3 changed files with 34 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
View File

@ -16,3 +16,7 @@
reg = <0x80000000 0x40000000>;
};
};
&i2c4 { /* Onboard Motion sensors */
status = "okay";
};

4
arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
View File

@ -31,3 +31,7 @@
};
};
};
&i2c4 { /* Onboard Motion sensors */
status = "okay";
};

26
arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
View File

@ -188,6 +188,20 @@
};
};
&i2c2 { /* Brick snap in sensors connector */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clock-frequency = <100000>;
status = "okay";
};
&i2c4 { /* Onboard Motion sensors */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
clock-frequency = <100000>;
status = "disabled";
};
&iomuxc {
pinctrl_bt_reg: btreggrp {
fsl,pins =
@ -219,6 +233,18 @@
<MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins =
<MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1>,
<MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins =
<MX6SX_PAD_USB_H_DATA__I2C4_SDA 0x4001b8b1>,
<MX6SX_PAD_USB_H_STROBE__I2C4_SCL 0x4001b8b1>;
};
pinctrl_uart1: uart1grp {
fsl,pins =
<MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1>,