diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 89c57129357a..38ba58c97628 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -35,6 +35,7 @@
 #include "mux.h"
 #include "control.h"
 #include "display.h"
+#include "prm.h"
 
 #define DISPC_CONTROL		0x0040
 #define DISPC_CONTROL2		0x0238
@@ -512,7 +513,6 @@ static void dispc_disable_outputs(void)
 	}
 }
 
-#define MAX_MODULE_SOFTRESET_WAIT	10000
 int omap_dss_reset(struct omap_hwmod *oh)
 {
 	struct omap_hwmod_opt_clk *oc;
diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c
index 3da8900598c8..ab7bf181a105 100644
--- a/arch/arm/mach-omap2/hdq1w.c
+++ b/arch/arm/mach-omap2/hdq1w.c
@@ -31,11 +31,9 @@
 #include "omap_device.h"
 #include "hdq1w.h"
 
+#include "prm.h"
 #include "common.h"
 
-/* Maximum microseconds to wait for OMAP module to softreset */
-#define MAX_MODULE_SOFTRESET_WAIT	10000
-
 /**
  * omap_hdq1w_reset - reset the OMAP HDQ1W module
  * @oh: struct omap_hwmod *
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index ad55b943108f..be092e8e5d85 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -20,10 +20,11 @@
  */
 
 #include "soc.h"
-#include "common.h"
 #include "omap_hwmod.h"
 #include "omap_device.h"
 
+#include "prm.h"
+#include "common.h"
 #include "mux.h"
 #include "i2c.h"
 
@@ -32,9 +33,6 @@
 #define OMAP2_I2C_CON_OFFSET			0x24
 #define OMAP4_I2C_CON_OFFSET			0xA4
 
-/* Maximum microseconds to wait for OMAP module to softreset */
-#define MAX_MODULE_SOFTRESET_WAIT	10000
-
 #define MAX_OMAP_I2C_HWMOD_NAME_LEN	16
 
 static void __init omap2_i2c_mux_pins(int bus_id)
diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c
index 627e97e30743..aafdd4ca9f4f 100644
--- a/arch/arm/mach-omap2/msdi.c
+++ b/arch/arm/mach-omap2/msdi.c
@@ -25,6 +25,7 @@
 #include <linux/err.h>
 #include <linux/platform_data/gpio-omap.h>
 
+#include "prm.h"
 #include "common.h"
 #include "control.h"
 #include "omap_hwmod.h"
@@ -43,9 +44,6 @@
 #define MSDI_CON_CLKD_MASK			(0x3f << 0)
 #define MSDI_CON_CLKD_SHIFT			0
 
-/* Maximum microseconds to wait for OMAP module to softreset */
-#define MAX_MODULE_SOFTRESET_WAIT	10000
-
 /* MSDI_TARGET_RESET_CLKD: clock divisor to use throughout the reset */
 #define MSDI_TARGET_RESET_CLKD		0x3ff
 
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 37eeb45612f8..54b68121734c 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -151,6 +151,7 @@
 #include "cm3xxx.h"
 #include "cminst44xx.h"
 #include "cm33xx.h"
+#include "prm.h"
 #include "prm3xxx.h"
 #include "prm44xx.h"
 #include "prm33xx.h"
@@ -158,9 +159,6 @@
 #include "mux.h"
 #include "pm.h"
 
-/* Maximum microseconds to wait for OMAP module to softreset */
-#define MAX_MODULE_SOFTRESET_WAIT	10000
-
 /* Name of the OMAP hwmod for the MPU */
 #define MPU_INITIATOR_NAME		"mpu"
 
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index b25a32a5e548..c7d355fafd24 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -406,11 +406,6 @@
 #define OMAP3430_EN_CORE_MASK				(1 << 0)
 
 
-/*
- * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
- * submodule to exit hardreset
- */
-#define MAX_MODULE_HARDRESET_WAIT		10000
 
 /*
  * Maximum time(us) it takes to output the signal WUCLKOUT of the last
@@ -419,7 +414,6 @@
  * microseconds on OMAP4, so this timeout may be too high.
  */
 #define MAX_IOPAD_LATCH_TIME			100
-
 # ifndef __ASSEMBLER__
 
 /**
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index fb7dee29ce76..a1a266ce90da 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -20,6 +20,23 @@ extern void __iomem *prm_base;
 extern void omap2_set_globals_prm(void __iomem *prm);
 # endif
 
+
+/*
+ * MAX_MODULE_SOFTRESET_WAIT: Maximum microseconds to wait for OMAP
+ * module to softreset
+ */
+#define MAX_MODULE_SOFTRESET_WAIT		10000
+
+/*
+ * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
+ * submodule to exit hardreset
+ */
+#define MAX_MODULE_HARDRESET_WAIT		10000
+
+/*
+ * Register bitfields
+ */
+
 /*
  * 24XX: PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP
  *
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h
index 3330b1bf789d..78532d6fecd7 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h
@@ -241,11 +241,4 @@ extern int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm);
 #define OMAP_LOGICRETSTATE_MASK				(1 << 2)
 
 
-/*
- * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
- * submodule to exit hardreset
- */
-#define MAX_MODULE_HARDRESET_WAIT		10000
-
-
 #endif
diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c
index 5a8629ff0ab0..7c2b4ed38f02 100644
--- a/arch/arm/mach-omap2/wd_timer.c
+++ b/arch/arm/mach-omap2/wd_timer.c
@@ -1,6 +1,8 @@
 /*
  * OMAP2+ MPU WD_TIMER-specific code
  *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -30,9 +32,6 @@
 #define OMAP_WDT_WPS		0x34
 #define OMAP_WDT_SPR		0x48
 
-/* Maximum microseconds to wait for OMAP module to softreset */
-#define MAX_MODULE_SOFTRESET_WAIT	10000
-
 int omap2_wd_timer_disable(struct omap_hwmod *oh)
 {
 	void __iomem *base;