UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
This commit is contained in:
David Woodhouse 2006-04-30 20:34:39 +01:00 committed by David Woodhouse
parent c3ce7e203a e0a515bc6a
commit b07019f293
40 changed files with 1246 additions and 2161 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

40
arch/powerpc/configs/cell_defconfig
View File

@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
@ -55,6 +56,7 @@ CONFIG_SYSCTL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
@ -69,10 +71,6 @@ CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@ -84,7 +82,6 @@ CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
@ -93,6 +90,7 @@ CONFIG_STOP_MACHINE=y
#
# Block layer
#
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
@ -126,6 +124,7 @@ CONFIG_RTAS_FLASH=y
CONFIG_MMIO_NVRAM=y
CONFIG_CELL_IIC=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
@ -167,7 +166,6 @@ CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PPC_64K_PAGES is not set
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
@ -184,7 +182,6 @@ CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
#
@ -226,6 +223,7 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
@ -242,6 +240,7 @@ CONFIG_IPV6=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
@ -632,6 +631,7 @@ CONFIG_SERIAL_NONSTANDARD=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
@ -717,7 +717,6 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
@ -736,9 +735,7 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@ -765,10 +762,6 @@ CONFIG_I2C_ALGOBIT=y
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
@ -817,6 +810,19 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
@ -833,6 +839,11 @@ CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# File systems
#
@ -889,7 +900,6 @@ CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#

16
arch/powerpc/kernel/cputable.c
View File

@ -57,6 +57,8 @@ extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
#define COMMON_USER_POWER5_PLUS (COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS|\
PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
#define COMMON_USER_POWER6 (COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_05 |\
PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
#define COMMON_USER_BOOKE (PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \
PPC_FEATURE_BOOKE)
@ -263,6 +265,20 @@ struct cpu_spec cpu_specs[] = {
.oprofile_type = PPC_OPROFILE_POWER4,
.platform = "power5+",
},
{ /* Power6 */
.pvr_mask = 0xffff0000,
.pvr_value = 0x003e0000,
.cpu_name = "POWER6",
.cpu_features = CPU_FTRS_POWER6,
.cpu_user_features = COMMON_USER_POWER6,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
.cpu_setup = __setup_cpu_power4,
.oprofile_cpu_type = "ppc64/power6",
.oprofile_type = PPC_OPROFILE_POWER4,
.platform = "power6",
},
{ /* Cell Broadband Engine */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00700000,

16
arch/powerpc/kernel/module_64.c
View File

@ -191,11 +191,19 @@ int module_frob_arch_sections(Elf64_Ehdr *hdr,
(void *)hdr
+ sechdrs[sechdrs[i].sh_link].sh_offset);
}
if (!me->arch.stubs_section || !me->arch.toc_section) {
printk("%s: doesn't contain .toc or .stubs.\n", me->name);
if (!me->arch.stubs_section) {
printk("%s: doesn't contain .stubs.\n", me->name);
return -ENOEXEC;
}
/* If we don't have a .toc, just use .stubs. We need to set r2
to some reasonable value in case the module calls out to
other functions via a stub, or if a function pointer escapes
the module by some means. */
if (!me->arch.toc_section)
me->arch.toc_section = me->arch.stubs_section;
/* Override the stubs size */
sechdrs[me->arch.stubs_section].sh_size = get_stubs_size(hdr, sechdrs);
return 0;
@ -342,7 +350,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
break;
case R_PPC64_TOC16:
/* Subtact TOC pointer */
/* Subtract TOC pointer */
value -= my_r2(sechdrs, me);
if (value + 0x8000 > 0xffff) {
printk("%s: bad TOC16 relocation (%lu)\n",
@ -355,7 +363,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
break;
case R_PPC64_TOC16_DS:
/* Subtact TOC pointer */
/* Subtract TOC pointer */
value -= my_r2(sechdrs, me);
if ((value & 3) != 0 || value + 0x8000 > 0xffff) {
printk("%s: bad TOC16_DS relocation (%lu)\n",

112
arch/powerpc/kernel/prom_init.c
View File

@ -636,10 +636,96 @@ static void __init early_cmdline_parse(void)
#ifdef CONFIG_PPC_PSERIES
/*
* To tell the firmware what our capabilities are, we have to pass
* it a fake 32-bit ELF header containing a couple of PT_NOTE sections
* that contain structures that contain the actual values.
* There are two methods for telling firmware what our capabilities are.
* Newer machines have an "ibm,client-architecture-support" method on the
* root node. For older machines, we have to call the "process-elf-header"
* method in the /packages/elf-loader node, passing it a fake 32-bit
* ELF header containing a couple of PT_NOTE sections that contain
* structures that contain various information.
*/
/*
* New method - extensible architecture description vector.
*
* Because the description vector contains a mix of byte and word
* values, we declare it as an unsigned char array, and use this
* macro to put word values in.
*/
#define W(x) ((x) >> 24) & 0xff, ((x) >> 16) & 0xff, \
((x) >> 8) & 0xff, (x) & 0xff
/* Option vector bits - generic bits in byte 1 */
#define OV_IGNORE 0x80 /* ignore this vector */
#define OV_CESSATION_POLICY 0x40 /* halt if unsupported option present*/
/* Option vector 1: processor architectures supported */
#define OV1_PPC_2_00 0x80 /* set if we support PowerPC 2.00 */
#define OV1_PPC_2_01 0x40 /* set if we support PowerPC 2.01 */
#define OV1_PPC_2_02 0x20 /* set if we support PowerPC 2.02 */
#define OV1_PPC_2_03 0x10 /* set if we support PowerPC 2.03 */
#define OV1_PPC_2_04 0x08 /* set if we support PowerPC 2.04 */
#define OV1_PPC_2_05 0x04 /* set if we support PowerPC 2.05 */
/* Option vector 2: Open Firmware options supported */
#define OV2_REAL_MODE 0x20 /* set if we want OF in real mode */
/* Option vector 3: processor options supported */
#define OV3_FP 0x80 /* floating point */
#define OV3_VMX 0x40 /* VMX/Altivec */
/* Option vector 5: PAPR/OF options supported */
#define OV5_LPAR 0x80 /* logical partitioning supported */
#define OV5_SPLPAR 0x40 /* shared-processor LPAR supported */
/* ibm,dynamic-reconfiguration-memory property supported */
#define OV5_DRCONF_MEMORY 0x20
#define OV5_LARGE_PAGES 0x10 /* large pages supported */
/*
* The architecture vector has an array of PVR mask/value pairs,
* followed by # option vectors - 1, followed by the option vectors.
*/
static unsigned char ibm_architecture_vec[] = {
W(0xfffe0000), W(0x003a0000), /* POWER5/POWER5+ */
W(0xffff0000), W(0x003e0000), /* POWER6 */
W(0xfffffffe), W(0x0f000001), /* all 2.04-compliant and earlier */
5 - 1, /* 5 option vectors */
/* option vector 1: processor architectures supported */
3 - 1, /* length */
0, /* don't ignore, don't halt */
OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 |
OV1_PPC_2_04 | OV1_PPC_2_05,
/* option vector 2: Open Firmware options supported */
34 - 1, /* length */
OV2_REAL_MODE,
0, 0,
W(0xffffffff), /* real_base */
W(0xffffffff), /* real_size */
W(0xffffffff), /* virt_base */
W(0xffffffff), /* virt_size */
W(0xffffffff), /* load_base */
W(64), /* 128MB min RMA */
W(0xffffffff), /* full client load */
0, /* min RMA percentage of total RAM */
48, /* max log_2(hash table size) */
/* option vector 3: processor options supported */
3 - 1, /* length */
0, /* don't ignore, don't halt */
OV3_FP | OV3_VMX,
/* option vector 4: IBM PAPR implementation */
2 - 1, /* length */
0, /* don't halt */
/* option vector 5: PAPR/OF options */
3 - 1, /* length */
0, /* don't ignore, don't halt */
OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES,
};
/* Old method - ELF header with PT_NOTE sections */
static struct fake_elf {
Elf32_Ehdr elfhdr;
Elf32_Phdr phdr[2];
@ -728,8 +814,26 @@ static struct fake_elf {
static void __init prom_send_capabilities(void)
{
ihandle elfloader;
ihandle elfloader, root;
prom_arg_t ret;
root = call_prom("open", 1, 1, ADDR("/"));
if (root != 0) {
/* try calling the ibm,client-architecture-support method */
if (call_prom_ret("call-method", 3, 2, &ret,
ADDR("ibm,client-architecture-support"),
ADDR(ibm_architecture_vec)) == 0) {
/* the call exists... */
if (ret)
prom_printf("WARNING: ibm,client-architecture"
"-support call FAILED!\n");
call_prom("close", 1, 0, root);
return;
}
call_prom("close", 1, 0, root);
}
/* no ibm,client-architecture-support call, try the old way */
elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader"));
if (elfloader == 0) {
prom_printf("couldn't open /packages/elf-loader\n");

8
arch/powerpc/kernel/setup-common.c
View File

@ -516,3 +516,11 @@ void probe_machine(void)
printk(KERN_INFO "Using %s machine description\n", ppc_md.name);
}
int check_legacy_ioport(unsigned long base_port)
{
if (ppc_md.check_legacy_ioport == NULL)
return 0;
return ppc_md.check_legacy_ioport(base_port);
}
EXPORT_SYMBOL(check_legacy_ioport);

8
arch/powerpc/kernel/setup_64.c
View File

@ -594,14 +594,6 @@ void ppc64_terminate_msg(unsigned int src, const char *msg)
printk("[terminate]%04x %s\n", src, msg);
}
int check_legacy_ioport(unsigned long base_port)
{
if (ppc_md.check_legacy_ioport == NULL)
return 0;
return ppc_md.check_legacy_ioport(base_port);
}
EXPORT_SYMBOL(check_legacy_ioport);
void cpu_die(void)
{
if (ppc_md.cpu_die)

13
arch/powerpc/kernel/systbl.S
View File

@ -325,6 +325,19 @@ SYSCALL(unshare)
SYSCALL(splice)
SYSCALL(tee)
SYSCALL(vmsplice)
COMPAT_SYS(openat)
SYSCALL(mkdirat)
SYSCALL(mknodat)
SYSCALL(fchownat)
COMPAT_SYS(futimesat)
SYSX(sys_newfstatat, sys_fstatat64, sys_fstatat64)
SYSCALL(unlinkat)
SYSCALL(renameat)
SYSCALL(linkat)
SYSCALL(symlinkat)
SYSCALL(readlinkat)
SYSCALL(fchmodat)
SYSCALL(faccessat)
/*
* please add new calls to arch/powerpc/platforms/cell/spu_callbacks.c

297
arch/powerpc/mm/hugetlbpage.c
View File

@ -30,13 +30,66 @@
#define NUM_LOW_AREAS (0x100000000UL >> SID_SHIFT)
#define NUM_HIGH_AREAS (PGTABLE_RANGE >> HTLB_AREA_SHIFT)
#ifdef CONFIG_PPC_64K_PAGES
#define HUGEPTE_INDEX_SIZE (PMD_SHIFT-HPAGE_SHIFT)
#else
#define HUGEPTE_INDEX_SIZE (PUD_SHIFT-HPAGE_SHIFT)
#endif
#define PTRS_PER_HUGEPTE (1 << HUGEPTE_INDEX_SIZE)
#define HUGEPTE_TABLE_SIZE (sizeof(pte_t) << HUGEPTE_INDEX_SIZE)
#define HUGEPD_SHIFT (HPAGE_SHIFT + HUGEPTE_INDEX_SIZE)
#define HUGEPD_SIZE (1UL << HUGEPD_SHIFT)
#define HUGEPD_MASK (~(HUGEPD_SIZE-1))
#define huge_pgtable_cache (pgtable_cache[HUGEPTE_CACHE_NUM])
/* Flag to mark huge PD pointers. This means pmd_bad() and pud_bad()
* will choke on pointers to hugepte tables, which is handy for
* catching screwups early. */
#define HUGEPD_OK 0x1
typedef struct { unsigned long pd; } hugepd_t;
#define hugepd_none(hpd) ((hpd).pd == 0)
static inline pte_t *hugepd_page(hugepd_t hpd)
{
BUG_ON(!(hpd.pd & HUGEPD_OK));
return (pte_t *)(hpd.pd & ~HUGEPD_OK);
}
static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr)
{
unsigned long idx = ((addr >> HPAGE_SHIFT) & (PTRS_PER_HUGEPTE-1));
pte_t *dir = hugepd_page(*hpdp);
return dir + idx;
}
static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
unsigned long address)
{
pte_t *new = kmem_cache_alloc(huge_pgtable_cache,
GFP_KERNEL|__GFP_REPEAT);
if (! new)
return -ENOMEM;
spin_lock(&mm->page_table_lock);
if (!hugepd_none(*hpdp))
kmem_cache_free(huge_pgtable_cache, new);
else
hpdp->pd = (unsigned long)new | HUGEPD_OK;
spin_unlock(&mm->page_table_lock);
return 0;
}
/* Modelled after find_linux_pte() */
pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
{
pgd_t *pg;
pud_t *pu;
pmd_t *pm;
pte_t *pt;
BUG_ON(! in_hugepage_area(mm->context, addr));
@ -46,26 +99,14 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
if (!pgd_none(*pg)) {
pu = pud_offset(pg, addr);
if (!pud_none(*pu)) {
pm = pmd_offset(pu, addr);
#ifdef CONFIG_PPC_64K_PAGES
/* Currently, we use the normal PTE offset within full
* size PTE pages, thus our huge PTEs are scattered in
* the PTE page and we do waste some. We may change
* that in the future, but the current mecanism keeps
* things much simpler
*/
if (!pmd_none(*pm)) {
/* Note: pte_offset_* are all equivalent on
* ppc64 as we don't have HIGHMEM
*/
pt = pte_offset_kernel(pm, addr);
return pt;
}
#else /* CONFIG_PPC_64K_PAGES */
/* On 4k pages, we put huge PTEs in the PMD page */
pt = (pte_t *)pm;
return pt;
#endif /* CONFIG_PPC_64K_PAGES */
pmd_t *pm;
pm = pmd_offset(pu, addr);
if (!pmd_none(*pm))
return hugepte_offset((hugepd_t *)pm, addr);
#else
return hugepte_offset((hugepd_t *)pu, addr);
#endif
}
}
@ -76,8 +117,7 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
{
pgd_t *pg;
pud_t *pu;
pmd_t *pm;
pte_t *pt;
hugepd_t *hpdp = NULL;
BUG_ON(! in_hugepage_area(mm->context, addr));
@ -87,23 +127,182 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
pu = pud_alloc(mm, pg, addr);
if (pu) {
pm = pmd_alloc(mm, pu, addr);
if (pm) {
#ifdef CONFIG_PPC_64K_PAGES
/* See comment in huge_pte_offset. Note that if we ever
* want to put the page size in the PMD, we would have
* to open code our own pte_alloc* function in order
* to populate and set the size atomically
*/
pt = pte_alloc_map(mm, pm, addr);
#else /* CONFIG_PPC_64K_PAGES */
pt = (pte_t *)pm;
#endif /* CONFIG_PPC_64K_PAGES */
return pt;
}
pmd_t *pm;
pm = pmd_alloc(mm, pu, addr);
if (pm)
hpdp = (hugepd_t *)pm;
#else
hpdp = (hugepd_t *)pu;
#endif
}
return NULL;
if (! hpdp)
return NULL;
if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr))
return NULL;
return hugepte_offset(hpdp, addr);
}
static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp)
{
pte_t *hugepte = hugepd_page(*hpdp);
hpdp->pd = 0;
tlb->need_flush = 1;
pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM,
HUGEPTE_TABLE_SIZE-1));
}
#ifdef CONFIG_PPC_64K_PAGES
static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
unsigned long addr, unsigned long end,
unsigned long floor, unsigned long ceiling)
{
pmd_t *pmd;
unsigned long next;
unsigned long start;
start = addr;
pmd = pmd_offset(pud, addr);
do {
next = pmd_addr_end(addr, end);
if (pmd_none(*pmd))
continue;
free_hugepte_range(tlb, (hugepd_t *)pmd);
} while (pmd++, addr = next, addr != end);
start &= PUD_MASK;
if (start < floor)
return;
if (ceiling) {
ceiling &= PUD_MASK;
if (!ceiling)
return;
}
if (end - 1 > ceiling - 1)
return;
pmd = pmd_offset(pud, start);
pud_clear(pud);
pmd_free_tlb(tlb, pmd);
}
#endif
static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
unsigned long addr, unsigned long end,
unsigned long floor, unsigned long ceiling)
{
pud_t *pud;
unsigned long next;
unsigned long start;
start = addr;
pud = pud_offset(pgd, addr);
do {
next = pud_addr_end(addr, end);
#ifdef CONFIG_PPC_64K_PAGES
if (pud_none_or_clear_bad(pud))
continue;
hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling);
#else
if (pud_none(*pud))
continue;
free_hugepte_range(tlb, (hugepd_t *)pud);
#endif
} while (pud++, addr = next, addr != end);
start &= PGDIR_MASK;
if (start < floor)
return;
if (ceiling) {
ceiling &= PGDIR_MASK;
if (!ceiling)
return;
}
if (end - 1 > ceiling - 1)
return;
pud = pud_offset(pgd, start);
pgd_clear(pgd);
pud_free_tlb(tlb, pud);
}
/*
* This function frees user-level page tables of a process.
*
* Must be called with pagetable lock held.
*/
void hugetlb_free_pgd_range(struct mmu_gather **tlb,
unsigned long addr, unsigned long end,
unsigned long floor, unsigned long ceiling)
{
pgd_t *pgd;
unsigned long next;
unsigned long start;
/*
* Comments below take from the normal free_pgd_range(). They
* apply here too. The tests against HUGEPD_MASK below are
* essential, because we *don't* test for this at the bottom
* level. Without them we'll attempt to free a hugepte table
* when we unmap just part of it, even if there are other
* active mappings using it.
*
* The next few lines have given us lots of grief...
*
* Why are we testing HUGEPD* at this top level? Because
* often there will be no work to do at all, and we'd prefer
* not to go all the way down to the bottom just to discover
* that.
*
* Why all these "- 1"s? Because 0 represents both the bottom
* of the address space and the top of it (using -1 for the
* top wouldn't help much: the masks would do the wrong thing).
* The rule is that addr 0 and floor 0 refer to the bottom of
* the address space, but end 0 and ceiling 0 refer to the top
* Comparisons need to use "end - 1" and "ceiling - 1" (though
* that end 0 case should be mythical).
*
* Wherever addr is brought up or ceiling brought down, we
* must be careful to reject "the opposite 0" before it
* confuses the subsequent tests. But what about where end is
* brought down by HUGEPD_SIZE below? no, end can't go down to
* 0 there.
*
* Whereas we round start (addr) and ceiling down, by different
* masks at different levels, in order to test whether a table
* now has no other vmas using it, so can be freed, we don't
* bother to round floor or end up - the tests don't need that.
*/
addr &= HUGEPD_MASK;
if (addr < floor) {
addr += HUGEPD_SIZE;
if (!addr)
return;
}
if (ceiling) {
ceiling &= HUGEPD_MASK;
if (!ceiling)
return;
}
if (end - 1 > ceiling - 1)
end -= HUGEPD_SIZE;
if (addr > end - 1)
return;
start = addr;
pgd = pgd_offset((*tlb)->mm, addr);
do {
BUG_ON(! in_hugepage_area((*tlb)->mm->context, addr));
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(pgd))
continue;
hugetlb_free_pud_range(*tlb, pgd, addr, next, floor, ceiling);
} while (pgd++, addr = next, addr != end);
}
void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
@ -841,3 +1040,27 @@ repeat:
out:
return err;
}
static void zero_ctor(void *addr, kmem_cache_t *cache, unsigned long flags)
{
memset(addr, 0, kmem_cache_size(cache));
}
static int __init hugetlbpage_init(void)
{
if (!cpu_has_feature(CPU_FTR_16M_PAGE))
return -ENODEV;
huge_pgtable_cache = kmem_cache_create("hugepte_cache",
HUGEPTE_TABLE_SIZE,
HUGEPTE_TABLE_SIZE,
SLAB_HWCACHE_ALIGN |
SLAB_MUST_HWCACHE_ALIGN,
zero_ctor, NULL);
if (! huge_pgtable_cache)
panic("hugetlbpage_init(): could not create hugepte cache\n");
return 0;
}
module_init(hugetlbpage_init);

7
arch/powerpc/mm/init_64.c
View File

@ -162,7 +162,14 @@ static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = {
};
#endif /* CONFIG_PPC_64K_PAGES */
#ifdef CONFIG_HUGETLB_PAGE
/* Hugepages need one extra cache, initialized in hugetlbpage.c. We
* can't put into the tables above, because HPAGE_SHIFT is not compile
* time constant. */
kmem_cache_t *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)+1];
#else
kmem_cache_t *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)];
#endif
void pgtable_cache_init(void)
{

10
arch/powerpc/platforms/cell/spu_base.c
View File

@ -306,19 +306,19 @@ spu_request_irqs(struct spu *spu)
snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0", spu->number);
ret = request_irq(irq_base + spu->isrc,
spu_irq_class_0, 0, spu->irq_c0, spu);
spu_irq_class_0, SA_INTERRUPT, spu->irq_c0, spu);
if (ret)
goto out;
snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1", spu->number);
ret = request_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc,
spu_irq_class_1, 0, spu->irq_c1, spu);
spu_irq_class_1, SA_INTERRUPT, spu->irq_c1, spu);
if (ret)
goto out1;
snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2", spu->number);
ret = request_irq(irq_base + 2*IIC_CLASS_STRIDE + spu->isrc,
spu_irq_class_2, 0, spu->irq_c2, spu);
spu_irq_class_2, SA_INTERRUPT, spu->irq_c2, spu);
if (ret)
goto out2;
goto out;
@ -487,10 +487,14 @@ int spu_irq_class_1_bottom(struct spu *spu)
ea = spu->dar;
dsisr = spu->dsisr;
if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)) {
u64 flags;
access = (_PAGE_PRESENT | _PAGE_USER);
access |= (dsisr & MFC_DSISR_ACCESS_PUT) ? _PAGE_RW : 0UL;
local_irq_save(flags);
if (hash_page(ea, access, 0x300) != 0)
error |= CLASS1_ENABLE_STORAGE_FAULT_INTR;
local_irq_restore(flags);
}
if (error & CLASS1_ENABLE_STORAGE_FAULT_INTR) {
if ((ret = spu_handle_mm_fault(spu)) != 0)

13
arch/powerpc/platforms/cell/spu_callbacks.c
View File

@ -319,6 +319,19 @@ void *spu_syscall_table[] = {
[__NR_splice] sys_splice,
[__NR_tee] sys_tee,
[__NR_vmsplice] sys_vmsplice,
[__NR_openat] sys_openat,
[__NR_mkdirat] sys_mkdirat,
[__NR_mknodat] sys_mknodat,
[__NR_fchownat] sys_fchownat,
[__NR_futimesat] sys_futimesat,
[__NR_newfstatat] sys_newfstatat,
[__NR_unlinkat] sys_unlinkat,
[__NR_renameat] sys_renameat,
[__NR_linkat] sys_linkat,
[__NR_symlinkat] sys_symlinkat,
[__NR_readlinkat] sys_readlinkat,
[__NR_fchmodat] sys_fchmodat,
[__NR_faccessat] sys_faccessat,
};
long spu_sys_callback(struct spu_syscall_block *s)

2
arch/ppc/platforms/4xx/ocotea.c
View File

@ -331,7 +331,7 @@ static void __init ocotea_init(void)
void __init platform_init(unsigned long r3, unsigned long r4,
unsigned long r5, unsigned long r6, unsigned long r7)
{
ibm44x_platform_init(r3, r4, r5, r6, r7);
ibm440gx_platform_init(r3, r4, r5, r6, r7);
ppc_md.setup_arch = ocotea_setup_arch;
ppc_md.show_cpuinfo = ocotea_show_cpuinfo;

114
arch/ppc/platforms/mpc8272ads_setup.c
View File

@ -26,11 +26,35 @@
#include <asm/irq.h>
#include <asm/ppc_sys.h>
#include <asm/ppcboot.h>
#include <linux/fs_uart_pd.h>
#include "pq2ads_pd.h"
static void init_fcc1_ioports(void);
static void init_fcc2_ioports(void);
static void init_scc1_uart_ioports(void);
static void init_scc4_uart_ioports(void);
static struct fs_uart_platform_info mpc8272_uart_pdata[] = {
[fsid_scc1_uart] = {
.init_ioports = init_scc1_uart_ioports,
.fs_no = fsid_scc1_uart,
.brg = 1,
.tx_num_fifo = 4,
.tx_buf_size = 32,
.rx_num_fifo = 4,
.rx_buf_size = 32,
},
[fsid_scc4_uart] = {
.init_ioports = init_scc4_uart_ioports,
.fs_no = fsid_scc4_uart,
.brg = 4,
.tx_num_fifo = 4,
.tx_buf_size = 32,
.rx_num_fifo = 4,
.rx_buf_size = 32,
},
};
static struct fs_mii_bus_info mii_bus_info = {
.method = fsmii_bitbang,
@ -201,6 +225,55 @@ static void __init mpc8272ads_fixup_enet_pdata(struct platform_device *pdev,
}
}
static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev,
int idx)
{
bd_t *bd = (bd_t *) __res;
struct fs_uart_platform_info *pinfo;
int num = ARRAY_SIZE(mpc8272_uart_pdata);
int id = fs_uart_id_scc2fsid(idx);
/* no need to alter anything if console */
if ((id <= num) && (!pdev->dev.platform_data)) {
pinfo = &mpc8272_uart_pdata[id];
pinfo->uart_clk = bd->bi_intfreq;
pdev->dev.platform_data = pinfo;
}
}
static void init_scc1_uart_ioports(void)
{
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
/* SCC1 is only on port D */
setbits32(&immap->im_ioport.iop_ppard,0x00000003);
clrbits32(&immap->im_ioport.iop_psord,0x00000001);
setbits32(&immap->im_ioport.iop_psord,0x00000002);
clrbits32(&immap->im_ioport.iop_pdird,0x00000001);
setbits32(&immap->im_ioport.iop_pdird,0x00000002);
/* Wire BRG1 to SCC1 */
clrbits32(&immap->im_cpmux.cmx_scr,0x00ffffff);
iounmap(immap);
}
static void init_scc4_uart_ioports(void)
{
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
setbits32(&immap->im_ioport.iop_ppard,0x00000600);
clrbits32(&immap->im_ioport.iop_psord,0x00000600);
clrbits32(&immap->im_ioport.iop_pdird,0x00000200);
setbits32(&immap->im_ioport.iop_pdird,0x00000400);
/* Wire BRG4 to SCC4 */
clrbits32(&immap->im_cpmux.cmx_scr,0x000000ff);
setbits32(&immap->im_cpmux.cmx_scr,0x0000001b);
iounmap(immap);
}
static int mpc8272ads_platform_notify(struct device *dev)
{
static const struct platform_notify_dev_map dev_map[] = {
@ -208,6 +281,10 @@ static int mpc8272ads_platform_notify(struct device *dev)
.bus_id = "fsl-cpm-fcc",
.rtn = mpc8272ads_fixup_enet_pdata
},
{
.bus_id = "fsl-cpm-scc:uart",
.rtn = mpc
},
{
.bus_id = NULL
}
@ -230,7 +307,44 @@ int __init mpc8272ads_init(void)
ppc_sys_device_enable(MPC82xx_CPM_FCC1);
ppc_sys_device_enable(MPC82xx_CPM_FCC2);
/* to be ready for console, let's attach pdata here */
#ifdef CONFIG_SERIAL_CPM_SCC1
ppc_sys_device_setfunc(MPC82xx_CPM_SCC1, PPC_SYS_FUNC_UART);
ppc_sys_device_enable(MPC82xx_CPM_SCC1);
#endif
#ifdef CONFIG_SERIAL_CPM_SCC4
ppc_sys_device_setfunc(MPC82xx_CPM_SCC4, PPC_SYS_FUNC_UART);
ppc_sys_device_enable(MPC82xx_CPM_SCC4);
#endif
return 0;
}
/*
To prevent confusion, console selection is gross:
by 0 assumed SCC1 and by 1 assumed SCC4
*/
struct platform_device* early_uart_get_pdev(int index)
{
bd_t *bd = (bd_t *) __res;
struct fs_uart_platform_info *pinfo;
struct platform_device* pdev = NULL;
if(index) { /*assume SCC4 here*/
pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC4];
pinfo = &mpc8272<F12>_uart_pdata[1];
} else { /*over SCC1*/
pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC1];
pinfo = &mpc8272_uart_pdata[0];
}
pinfo->uart_clk = bd->bi_intfreq;
pdev->dev.platform_data = pinfo;
ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR);
return NULL;
}
arch_initcall(mpc8272ads_init);

140
arch/ppc/platforms/mpc866ads_setup.c
View File

@ -20,6 +20,7 @@
#include <linux/device.h>
#include <linux/fs_enet_pd.h>
#include <linux/fs_uart_pd.h>
#include <linux/mii.h>
#include <asm/delay.h>
@ -37,6 +38,11 @@
extern unsigned char __res[];
static void setup_fec1_ioports(void);
static void setup_scc1_ioports(void);
static void setup_smc1_ioports(void);
static void setup_smc2_ioports(void);
static struct fs_mii_bus_info fec_mii_bus_info = {
.method = fsmii_fec,
.id = 0,
@ -79,6 +85,28 @@ static struct fs_platform_info mpc8xx_scc_pdata = {
.phy_irq = -1,
.bus_info = &scc_mii_bus_info,
};
static struct fs_uart_platform_info mpc866_uart_pdata[] = {
[fsid_smc1_uart] = {
.brg = 1,
.fs_no = fsid_smc1_uart,
.init_ioports = setup_smc1_ioports,
.tx_num_fifo = 4,
.tx_buf_size = 32,
.rx_num_fifo = 4,
.rx_buf_size = 32,
},
[fsid_smc2_uart] = {
.brg = 2,
.fs_no = fsid_smc2_uart,
.init_ioports = setup_smc2_ioports,
.tx_num_fifo = 4,
.tx_buf_size = 32,
.rx_num_fifo = 4,
.rx_buf_size = 32,
},
};
void __init board_init(void)
@ -92,9 +120,12 @@ void __init board_init(void)
printk(KERN_CRIT "Could not remap BCSR1\n");
return;
}
#ifdef CONFIG_SERIAL_CPM_SMC1
cp->cp_simode &= ~(0xe0000000 >> 17); /* brg1 */
clrbits32(bcsr_io,(0x80000000 >> 7));
cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX);
cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
#else
setbits32(bcsr_io,(0x80000000 >> 7));
@ -108,6 +139,8 @@ void __init board_init(void)
cp->cp_simode &= ~(0xe0000000 >> 1);
cp->cp_simode |= (0x20000000 >> 1); /* brg2 */
clrbits32(bcsr_io,(0x80000000 >> 13));
cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX);
cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
#else
clrbits32(bcsr_io,(0x80000000 >> 13));
cp->cp_pbpar &= ~(0x00000c00);
@ -232,6 +265,74 @@ static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev,
mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
}
static void setup_smc1_ioports(void)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
unsigned *bcsr_io;
unsigned int iobits = 0x000000c0;
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
if (bcsr_io == NULL) {
printk(KERN_CRIT "Could not remap BCSR1\n");
return;
}
clrbits32(bcsr_io,BCSR1_RS232EN_1);
iounmap(bcsr_io);
setbits32(&immap->im_cpm.cp_pbpar, iobits);
clrbits32(&immap->im_cpm.cp_pbdir, iobits);
clrbits16(&immap->im_cpm.cp_pbodr, iobits);
}
static void setup_smc2_ioports(void)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
unsigned *bcsr_io;
unsigned int iobits = 0x00000c00;
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
if (bcsr_io == NULL) {
printk(KERN_CRIT "Could not remap BCSR1\n");
return;
}
clrbits32(bcsr_io,BCSR1_RS232EN_2);
iounmap(bcsr_io);
#ifndef CONFIG_SERIAL_CPM_ALT_SMC2
setbits32(&immap->im_cpm.cp_pbpar, iobits);
clrbits32(&immap->im_cpm.cp_pbdir, iobits);
clrbits16(&immap->im_cpm.cp_pbodr, iobits);
#else
setbits16(&immap->im_ioport.iop_papar, iobits);
clrbits16(&immap->im_ioport.iop_padir, iobits);
clrbits16(&immap->im_ioport.iop_paodr, iobits);
#endif
}
static void __init mpc866ads_fixup_uart_pdata(struct platform_device *pdev,
int idx)
{
bd_t *bd = (bd_t *) __res;
struct fs_uart_platform_info *pinfo;
int num = ARRAY_SIZE(mpc866_uart_pdata);
int id = fs_uart_id_smc2fsid(idx);
/* no need to alter anything if console */
if ((id <= num) && (!pdev->dev.platform_data)) {
pinfo = &mpc866_uart_pdata[id];
pinfo->uart_clk = bd->bi_intfreq;
pdev->dev.platform_data = pinfo;
}
}
static int mpc866ads_platform_notify(struct device *dev)
{
static const struct platform_notify_dev_map dev_map[] = {
@ -243,6 +344,10 @@ static int mpc866ads_platform_notify(struct device *dev)
.bus_id = "fsl-cpm-scc",
.rtn = mpc866ads_fixup_scc_enet_pdata,
},
{
.bus_id = "fsl-cpm-smc:uart",
.rtn = mpc866ads_fixup_uart_pdata
},
{
.bus_id = NULL
}
@ -267,7 +372,42 @@ int __init mpc866ads_init(void)
#endif
ppc_sys_device_enable(MPC8xx_CPM_FEC1);
/* Since either of the uarts could be used as console, they need to ready */
#ifdef CONFIG_SERIAL_CPM_SMC1
ppc_sys_device_enable(MPC8xx_CPM_SMC1);
ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART);
#endif
#ifdef CONFIG_SERIAL_CPM_SMCer
ppc_sys_device_enable(MPC8xx_CPM_SMC2);
ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART);
#endif
return 0;
}
/*
To prevent confusion, console selection is gross:
by 0 assumed SMC1 and by 1 assumed SMC2
*/
struct platform_device* early_uart_get_pdev(int index)
{
bd_t *bd = (bd_t *) __res;
struct fs_uart_platform_info *pinfo;
struct platform_device* pdev = NULL;
if(index) { /*assume SMC2 here*/
pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2];
pinfo = &mpc866_uart_pdata[1];
} else { /*over SMC1*/
pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1];
pinfo = &mpc866_uart_pdata[0];
}
pinfo->uart_clk = bd->bi_intfreq;
pdev->dev.platform_data = pinfo;
ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR);
return NULL;
}
arch_initcall(mpc866ads_init);

131
arch/ppc/platforms/mpc885ads_setup.c
View File

@ -20,6 +20,7 @@
#include <linux/device.h>
#include <linux/fs_enet_pd.h>
#include <linux/fs_uart_pd.h>
#include <linux/mii.h>
#include <asm/delay.h>
@ -35,9 +36,32 @@
#include <asm/ppc_sys.h>
extern unsigned char __res[];
static void setup_smc1_ioports(void);
static void setup_smc2_ioports(void);
static void __init mpc885ads_scc_phy_init(char);
static struct fs_uart_platform_info mpc885_uart_pdata[] = {
[fsid_smc1_uart] = {
.brg = 1,
.fs_no = fsid_smc1_uart,
.init_ioports = setup_smc1_ioports,
.tx_num_fifo = 4,
.tx_buf_size = 32,
.rx_num_fifo = 4,
.rx_buf_size = 32,
},
[fsid_smc2_uart] = {
.brg = 2,
.fs_no = fsid_smc2_uart,
.init_ioports = setup_smc2_ioports,
.tx_num_fifo = 4,
.tx_buf_size = 32,
.rx_num_fifo = 4,
.rx_buf_size = 32,
},
};
static struct fs_mii_bus_info fec_mii_bus_info = {
.method = fsmii_fec,
.id = 0,
@ -116,6 +140,8 @@ void __init board_init(void)
#ifdef CONFIG_SERIAL_CPM_SMC1
cp->cp_simode &= ~(0xe0000000 >> 17); /* brg1 */
clrbits32(bcsr_io, BCSR1_RS232EN_1);
cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX);
cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
#else
setbits32(bcsr_io,BCSR1_RS232EN_1);
cp->cp_smc[0].smc_smcmr = 0;
@ -126,6 +152,8 @@ void __init board_init(void)
cp->cp_simode &= ~(0xe0000000 >> 1);
cp->cp_simode |= (0x20000000 >> 1); /* brg2 */
clrbits32(bcsr_io,BCSR1_RS232EN_2);
cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX);
cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
#else
setbits32(bcsr_io,BCSR1_RS232EN_2);
cp->cp_smc[1].smc_smcmr = 0;
@ -343,6 +371,70 @@ static void mpc885ads_scc_phy_init(char phy_addr)
out_be32(&fecp->fec_mii_speed, 0);
}
static void setup_smc1_ioports(void)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
unsigned *bcsr_io;
unsigned int iobits = 0x000000c0;
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
if (bcsr_io == NULL) {
printk(KERN_CRIT "Could not remap BCSR1\n");
return;
}
clrbits32(bcsr_io,BCSR1_RS232EN_1);
iounmap(bcsr_io);
setbits32(&immap->im_cpm.cp_pbpar, iobits);
clrbits32(&immap->im_cpm.cp_pbdir, iobits);
clrbits16(&immap->im_cpm.cp_pbodr, iobits);
}
static void setup_smc2_ioports(void)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
unsigned *bcsr_io;
unsigned int iobits = 0x00000c00;
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
if (bcsr_io == NULL) {
printk(KERN_CRIT "Could not remap BCSR1\n");
return;
}
clrbits32(bcsr_io,BCSR1_RS232EN_2);
iounmap(bcsr_io);
#ifndef CONFIG_SERIAL_CPM_ALT_SMC2
setbits32(&immap->im_cpm.cp_pbpar, iobits);
clrbits32(&immap->im_cpm.cp_pbdir, iobits);
clrbits16(&immap->im_cpm.cp_pbodr, iobits);
#else
setbits16(&immap->im_ioport.iop_papar, iobits);
clrbits16(&immap->im_ioport.iop_padir, iobits);
clrbits16(&immap->im_ioport.iop_paodr, iobits);
#endif
}
static void __init mpc885ads_fixup_uart_pdata(struct platform_device *pdev,
int idx)
{
bd_t *bd = (bd_t *) __res;
struct fs_uart_platform_info *pinfo;
int num = ARRAY_SIZE(mpc885_uart_pdata);
int id = fs_uart_id_smc2fsid(idx);
/* no need to alter anything if console */
if ((id <= num) && (!pdev->dev.platform_data)) {
pinfo = &mpc885_uart_pdata[id];
pinfo->uart_clk = bd->bi_intfreq;
pdev->dev.platform_data = pinfo;
}
}
static int mpc885ads_platform_notify(struct device *dev)
{
@ -355,6 +447,10 @@ static int mpc885ads_platform_notify(struct device *dev)
.bus_id = "fsl-cpm-scc",
.rtn = mpc885ads_fixup_scc_enet_pdata,
},
{
.bus_id = "fsl-cpm-smc:uart",
.rtn = mpc885ads_fixup_uart_pdata
},
{
.bus_id = NULL
}
@ -362,6 +458,7 @@ static int mpc885ads_platform_notify(struct device *dev)
platform_notify_map(dev_map,dev);
return 0;
}
int __init mpc885ads_init(void)
@ -383,7 +480,41 @@ int __init mpc885ads_init(void)
ppc_sys_device_enable(MPC8xx_CPM_FEC2);
#endif
#ifdef CONFIG_SERIAL_CPM_SMC1
ppc_sys_device_enable(MPC8xx_CPM_SMC1);
ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART);
#endif
#ifdef CONFIG_SERIAL_CPM_SMC2
ppc_sys_device_enable(MPC8xx_CPM_SMC2);
ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART);
#endif
return 0;
}
arch_initcall(mpc885ads_init);
/*
To prevent confusion, console selection is gross:
by 0 assumed SMC1 and by 1 assumed SMC2
*/
struct platform_device* early_uart_get_pdev(int index)
{
bd_t *bd = (bd_t *) __res;
struct fs_uart_platform_info *pinfo;
struct platform_device* pdev = NULL;
if(index) { /*assume SMC2 here*/
pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2];
pinfo = &mpc885_uart_pdata[1];
} else { /*over SMC1*/
pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1];
pinfo = &mpc885_uart_pdata[0];
}
pinfo->uart_clk = bd->bi_intfreq;
pdev->dev.platform_data = pinfo;
ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR);
return NULL;
}

31
arch/ppc/platforms/pq2ads.c
View File

@ -14,11 +14,40 @@
#include <linux/init.h>
#include <asm/io.h>
#include <asm/mpc8260.h>
#include <asm/cpm2.h>
#include <asm/immap_cpm2.h>
void __init
m82xx_board_setup(void)
{
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
u32 *bcsr = ioremap(BCSR_ADDR+4, sizeof(u32));
/* Enable the 2nd UART port */
*(volatile uint *)(BCSR_ADDR + 4) &= ~BCSR1_RS232_EN2;
clrbits32(bcsr, BCSR1_RS232_EN2);
#ifdef CONFIG_SERIAL_CPM_SCC1
clrbits32((u32*)&immap->im_scc[0].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32*)&immap->im_scc[0].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
#ifdef CONFIG_SERIAL_CPM_SCC2
clrbits32((u32*)&immap->im_scc[1].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32*)&immap->im_scc[1].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
#ifdef CONFIG_SERIAL_CPM_SCC3
clrbits32((u32*)&immap->im_scc[2].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32*)&immap->im_scc[2].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
#ifdef CONFIG_SERIAL_CPM_SCC4
clrbits32((u32*)&immap->im_scc[3].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32*)&immap->im_scc[3].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
iounmap(bcsr);
iounmap(immap);
}

13
arch/ppc/syslib/ibm440gx_common.c
View File

@ -2,7 +2,7 @@
* PPC440GX system library
*
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
* Copyright (c) 2003, 2004 Zultys Technologies
* Copyright (c) 2003 - 2006 Zultys Technologies
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@ -282,3 +282,14 @@ int ibm440gx_show_cpuinfo(struct seq_file *m){
return 0;
}
void __init ibm440gx_platform_init(unsigned long r3, unsigned long r4,
unsigned long r5, unsigned long r6,
unsigned long r7)
{
/* Erratum 440_43 workaround, disable L1 cache parity checking */
if (!strcmp(cur_cpu_spec->cpu_name, "440GX Rev. C") ||
!strcmp(cur_cpu_spec->cpu_name, "440GX Rev. F"))
mtspr(SPRN_CCR1, mfspr(SPRN_CCR1) | CCR1_DPC);
ibm44x_platform_init(r3, r4, r5, r6, r7);
}

4
arch/ppc/syslib/ibm440gx_common.h
View File

@ -29,6 +29,10 @@
void ibm440gx_get_clocks(struct ibm44x_clocks*, unsigned int sys_clk,
unsigned int ser_clk) __init;
/* common 440GX platform init */
void ibm440gx_platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7) __init;
/* Enable L2 cache */
void ibm440gx_l2c_enable(void) __init;

25
arch/ppc/syslib/mpc8xx_devices.c
View File

@ -170,12 +170,18 @@ struct platform_device ppc_sys_platform_devices[] = {
[MPC8xx_CPM_SMC1] = {
.name = "fsl-cpm-smc",
.id = 1,
.num_resources = 2,
.num_resources = 3,
.resource = (struct resource[]) {
{
.name = "regs",
.start = 0xa82,
.end = 0xa91,
.start = 0xa80,
.end = 0xa8f,
.flags = IORESOURCE_MEM,
},
{
.name = "pram",
.start = 0x3e80,
.end = 0x3ebf,
.flags = IORESOURCE_MEM,
},
{
@ -189,14 +195,21 @@ struct platform_device ppc_sys_platform_devices[] = {
[MPC8xx_CPM_SMC2] = {
.name = "fsl-cpm-smc",
.id = 2,
.num_resources = 2,
.num_resources = 3,
.resource = (struct resource[]) {
{
.name = "regs",
.start = 0xa92,
.end = 0xaa1,
.start = 0xa90,
.end = 0xa9f,
.flags = IORESOURCE_MEM,
},
{
.name = "pram",
.start = 0x3f80,
.end = 0x3fbf,
.flags = IORESOURCE_MEM,
},
{
.name = "interrupt",
.start = MPC8xx_INT_SMC2,

4
arch/ppc/syslib/ppc_sys.c
View File

@ -109,9 +109,11 @@ ppc_sys_fixup_mem_resource(struct platform_device *pdev, phys_addr_t paddr)
int i;
for (i = 0; i < pdev->num_resources; i++) {
struct resource *r = &pdev->resource[i];
if ((r->flags & IORESOURCE_MEM) == IORESOURCE_MEM) {
if (((r->flags & IORESOURCE_MEM) == IORESOURCE_MEM) &&
((r->flags & PPC_SYS_IORESOURCE_FIXUPPED) != PPC_SYS_IORESOURCE_FIXUPPED)) {
r->start += paddr;
r->end += paddr;
r->flags |= PPC_SYS_IORESOURCE_FIXUPPED;
}
}
}

8
arch/ppc/syslib/pq2_sys.c
View File

@ -113,13 +113,13 @@ struct ppc_sys_spec ppc_sys_specs[] = {
.ppc_sys_name = "8248",
.mask = 0x0000ff00,
.value = 0x00000c00,
.num_devices = 11,
.num_devices = 12,
.device_list = (enum ppc_sys_devices[])
{
MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SMC1,
MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
MPC82xx_CPM_USB, MPC82xx_SEC1,
MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4,
MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
MPC82xx_CPM_I2C, MPC82xx_CPM_USB, MPC82xx_SEC1,
},
},
{

2
drivers/block/floppy.c
View File

@ -4301,7 +4301,7 @@ static int __init floppy_init(void)
}
use_virtual_dma = can_use_virtual_dma & 1;
#if defined(CONFIG_PPC64)
#if defined(CONFIG_PPC_MERGE)
if (check_legacy_ioport(FDC1)) {
del_timer(&fd_timeout);
err = -ENODEV;

4
drivers/input/serio/i8042-io.h
View File

@ -67,14 +67,14 @@ static inline int i8042_platform_init(void)
* On some platforms touching the i8042 data register region can do really
* bad things. Because of this the region is always reserved on such boxes.
*/
#if !defined(__sh__) && !defined(__alpha__) && !defined(__mips__) && !defined(CONFIG_PPC64)
#if !defined(__sh__) && !defined(__alpha__) && !defined(__mips__) && !defined(CONFIG_PPC_MERGE)
if (!request_region(I8042_DATA_REG, 16, "i8042"))
return -EBUSY;
#endif
i8042_reset = 1;
#if defined(CONFIG_PPC64)
#if defined(CONFIG_PPC_MERGE)
if (check_legacy_ioport(I8042_DATA_REG))
return -EBUSY;
if (!request_region(I8042_DATA_REG, 16, "i8042"))

4
drivers/scsi/Kconfig
View File

@ -446,7 +446,9 @@ config SCSI_DPT_I2O
config SCSI_ADVANSYS
tristate "AdvanSys SCSI support"
depends on (ISA || EISA || PCI) && SCSI && BROKEN
depends on SCSI
depends on ISA || EISA || PCI
depends on BROKEN || X86_32
help
This is a driver for all SCSI host adapters manufactured by
AdvanSys. It is documented in the kernel source in

2
drivers/scsi/advansys.c
View File

@ -2051,7 +2051,7 @@ STATIC ASC_DCNT AscGetMaxDmaCount(ushort);
#define ADV_VADDR_TO_U32 virt_to_bus
#define ADV_U32_TO_VADDR bus_to_virt
#define AdvPortAddr ulong /* Virtual memory address size */
#define AdvPortAddr void __iomem * /* Virtual memory address size */
/*
* Define Adv Library required memory access macros.

49
drivers/serial/cpm_uart/cpm_uart.h
View File

@ -10,6 +10,8 @@
#define CPM_UART_H
#include <linux/config.h>
#include <linux/platform_device.h>
#include <linux/fs_uart_pd.h>
#if defined(CONFIG_CPM2)
#include "cpm_uart_cpm2.h"
@ -26,14 +28,14 @@
#define FLAG_SMC 0x00000002
#define FLAG_CONSOLE 0x00000001
#define UART_SMC1 0
#define UART_SMC2 1
#define UART_SCC1 2
#define UART_SCC2 3
#define UART_SCC3 4
#define UART_SCC4 5
#define UART_SMC1 fsid_smc1_uart
#define UART_SMC2 fsid_smc2_uart
#define UART_SCC1 fsid_scc1_uart
#define UART_SCC2 fsid_scc2_uart
#define UART_SCC3 fsid_scc3_uart
#define UART_SCC4 fsid_scc4_uart
#define UART_NR 6
#define UART_NR fs_uart_nr
#define RX_NUM_FIFO 4
#define RX_BUF_SIZE 32
@ -64,6 +66,7 @@ struct uart_cpm_port {
uint dp_addr;
void *mem_addr;
dma_addr_t dma_addr;
u32 mem_size;
/* helpers */
int baud;
int bits;
@ -90,4 +93,36 @@ void scc2_lineif(struct uart_cpm_port *pinfo);
void scc3_lineif(struct uart_cpm_port *pinfo);
void scc4_lineif(struct uart_cpm_port *pinfo);
/*
virtual to phys transtalion
*/
static inline unsigned long cpu2cpm_addr(void* addr, struct uart_cpm_port *pinfo)
{
int offset;
u32 val = (u32)addr;
/* sane check */
if ((val >= (u32)pinfo->mem_addr) &&
(val<((u32)pinfo->mem_addr + pinfo->mem_size))) {
offset = val - (u32)pinfo->mem_addr;
return pinfo->dma_addr+offset;
}
printk("%s(): address %x to translate out of range!\n", __FUNCTION__, val);
return 0;
}
static inline void *cpm2cpu_addr(unsigned long addr, struct uart_cpm_port *pinfo)
{
int offset;
u32 val = addr;
/* sane check */
if ((val >= pinfo->dma_addr) &&
(val<(pinfo->dma_addr + pinfo->mem_size))) {
offset = val - (u32)pinfo->dma_addr;
return (void*)(pinfo->mem_addr+offset);
}
printk("%s(): address %x to translate out of range!\n", __FUNCTION__, val);
return 0;
}
#endif /* CPM_UART_H */

290
drivers/serial/cpm_uart/cpm_uart_core.c
View File

@ -41,6 +41,7 @@
#include <linux/device.h>
#include <linux/bootmem.h>
#include <linux/dma-mapping.h>
#include <linux/fs_uart_pd.h>
#include <asm/io.h>
#include <asm/irq.h>
@ -60,7 +61,7 @@
/* Track which ports are configured as uarts */
int cpm_uart_port_map[UART_NR];
/* How many ports did we config as uarts */
int cpm_uart_nr;
int cpm_uart_nr = 0;
/**************************************************************/
@ -71,18 +72,36 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo);
/**************************************************************/
static inline unsigned long cpu2cpm_addr(void *addr)
/* Place-holder for board-specific stuff */
struct platform_device* __attribute__ ((weak)) __init
early_uart_get_pdev(int index)
{
if ((unsigned long)addr >= CPM_ADDR)
return (unsigned long)addr;
return virt_to_bus(addr);
return NULL;
}
static inline void *cpm2cpu_addr(unsigned long addr)
void cpm_uart_count(void)
{
if (addr >= CPM_ADDR)
return (void *)addr;
return bus_to_virt(addr);
cpm_uart_nr = 0;
#ifdef CONFIG_SERIAL_CPM_SMC1
cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
#endif
#ifdef CONFIG_SERIAL_CPM_SMC2
cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
#endif
#ifdef CONFIG_SERIAL_CPM_SCC1
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
#endif
#ifdef CONFIG_SERIAL_CPM_SCC2
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
#endif
#ifdef CONFIG_SERIAL_CPM_SCC3
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
#endif
#ifdef CONFIG_SERIAL_CPM_SCC4
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
#endif
}
/*
@ -258,7 +277,7 @@ static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs)
}
/* get pointer */
cp = cpm2cpu_addr(bdp->cbd_bufaddr);
cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
/* loop through the buffer */
while (i-- > 0) {
@ -601,7 +620,7 @@ static int cpm_uart_tx_pump(struct uart_port *port)
/* Pick next descriptor and fill from buffer */
bdp = pinfo->tx_cur;
p = cpm2cpu_addr(bdp->cbd_bufaddr);
p = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
*p++ = port->x_char;
bdp->cbd_datlen = 1;
@ -628,7 +647,7 @@ static int cpm_uart_tx_pump(struct uart_port *port)
while (!(bdp->cbd_sc & BD_SC_READY) && (xmit->tail != xmit->head)) {
count = 0;
p = cpm2cpu_addr(bdp->cbd_bufaddr);
p = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
while (count < pinfo->tx_fifosize) {
*p++ = xmit->buf[xmit->tail];
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@ -677,12 +696,12 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
mem_addr = pinfo->mem_addr;
bdp = pinfo->rx_cur = pinfo->rx_bd_base;
for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) {
bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
bdp->cbd_sc = BD_SC_EMPTY | BD_SC_INTRPT;
mem_addr += pinfo->rx_fifosize;
}
bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
bdp->cbd_sc = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT;
/* Set the physical address of the host memory
@ -692,12 +711,12 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize);
bdp = pinfo->tx_cur = pinfo->tx_bd_base;
for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) {
bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
bdp->cbd_sc = BD_SC_INTRPT;
mem_addr += pinfo->tx_fifosize;
}
bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
bdp->cbd_sc = BD_SC_WRAP | BD_SC_INTRPT;
}
@ -829,14 +848,6 @@ static int cpm_uart_request_port(struct uart_port *port)
if (pinfo->flags & FLAG_CONSOLE)
return 0;
/*
* Setup any port IO, connect any baud rate generators,
* etc. This is expected to be handled by board
* dependant code
*/
if (pinfo->set_lineif)
pinfo->set_lineif(pinfo);
if (IS_SMC(pinfo)) {
pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
@ -988,6 +999,54 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
},
};
int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con)
{
struct resource *r;
struct fs_uart_platform_info *pdata = pdev->dev.platform_data;
int idx = pdata->fs_no; /* It is UART_SMCx or UART_SCCx index */
struct uart_cpm_port *pinfo;
int line;
u32 mem, pram;
for (line=0; line<UART_NR && cpm_uart_port_map[line]!=pdata->fs_no; line++);
pinfo = (struct uart_cpm_port *) &cpm_uart_ports[idx];
pinfo->brg = pdata->brg;
if (!is_con) {
pinfo->port.line = line;
pinfo->port.flags = UPF_BOOT_AUTOCONF;
}
if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs")))
return -EINVAL;
mem = r->start;
if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram")))
return -EINVAL;
pram = r->start;
if(idx > fsid_smc2_uart) {
pinfo->sccp = (scc_t *)mem;
pinfo->sccup = (scc_uart_t *)pram;
} else {
pinfo->smcp = (smc_t *)mem;
pinfo->smcup = (smc_uart_t *)pram;
}
pinfo->tx_nrfifos = pdata->tx_num_fifo;
pinfo->tx_fifosize = pdata->tx_buf_size;
pinfo->rx_nrfifos = pdata->rx_num_fifo;
pinfo->rx_fifosize = pdata->rx_buf_size;
pinfo->port.uartclk = pdata->uart_clk;
pinfo->port.mapbase = (unsigned long)mem;
pinfo->port.irq = platform_get_irq(pdev, 0);
return 0;
}
#ifdef CONFIG_SERIAL_CPM_CONSOLE
/*
* Print a string to the serial port trying not to disturb
@ -1027,7 +1086,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
* If the buffer address is in the CPM DPRAM, don't
* convert it.
*/
cp = cpm2cpu_addr(bdp->cbd_bufaddr);
cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
*cp = *s;
@ -1044,7 +1103,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
while ((bdp->cbd_sc & BD_SC_READY) != 0)
;
cp = cpm2cpu_addr(bdp->cbd_bufaddr);
cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
*cp = 13;
bdp->cbd_datlen = 1;
@ -1067,9 +1126,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
pinfo->tx_cur = (volatile cbd_t *) bdp;
}
/*
* Setup console. Be careful is called early !
*/
static int __init cpm_uart_console_setup(struct console *co, char *options)
{
struct uart_port *port;
@ -1080,9 +1137,27 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
int flow = 'n';
int ret;
struct fs_uart_platform_info *pdata;
struct platform_device* pdev = early_uart_get_pdev(co->index);
port =
(struct uart_port *)&cpm_uart_ports[cpm_uart_port_map[co->index]];
pinfo = (struct uart_cpm_port *)port;
if (!pdev) {
pr_info("cpm_uart: console: compat mode\n");
/* compatibility - will be cleaned up */
cpm_uart_init_portdesc();
if (pinfo->set_lineif)
pinfo->set_lineif(pinfo);
} else {
pdata = pdev->dev.platform_data;
if (pdata)
if (pdata->init_ioports)
pdata->init_ioports();
cpm_uart_drv_get_platform_data(pdev, 1);
}
pinfo->flags |= FLAG_CONSOLE;
@ -1097,14 +1172,6 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
baud = 9600;
}
/*
* Setup any port IO, connect any baud rate generators,
* etc. This is expected to be handled by board
* dependant code
*/
if (pinfo->set_lineif)
pinfo->set_lineif(pinfo);
if (IS_SMC(pinfo)) {
pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
@ -1143,11 +1210,8 @@ static struct console cpm_scc_uart_console = {
int __init cpm_uart_console_init(void)
{
int ret = cpm_uart_init_portdesc();
if (!ret)
register_console(&cpm_scc_uart_console);
return ret;
register_console(&cpm_scc_uart_console);
return 0;
}
console_initcall(cpm_uart_console_init);
@ -1165,44 +1229,130 @@ static struct uart_driver cpm_reg = {
.minor = SERIAL_CPM_MINOR,
.cons = CPM_UART_CONSOLE,
};
static int __init cpm_uart_init(void)
static int cpm_uart_drv_probe(struct device *dev)
{
int ret, i;
struct platform_device *pdev = to_platform_device(dev);
struct fs_uart_platform_info *pdata;
int ret = -ENODEV;
printk(KERN_INFO "Serial: CPM driver $Revision: 0.01 $\n");
#ifndef CONFIG_SERIAL_CPM_CONSOLE
ret = cpm_uart_init_portdesc();
if (ret)
if(!pdev) {
printk(KERN_ERR"CPM UART: platform data missing!\n");
return ret;
#endif
cpm_reg.nr = cpm_uart_nr;
ret = uart_register_driver(&cpm_reg);
if (ret)
return ret;
for (i = 0; i < cpm_uart_nr; i++) {
int con = cpm_uart_port_map[i];
cpm_uart_ports[con].port.line = i;
cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF;
uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port);
}
pdata = pdev->dev.platform_data;
pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n",
cpm_uart_port_map[pdata->fs_no]);
if ((ret = cpm_uart_drv_get_platform_data(pdev, 0)))
return ret;
if (pdata->init_ioports)
pdata->init_ioports();
ret = uart_add_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port);
return ret;
}
static int cpm_uart_drv_remove(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct fs_uart_platform_info *pdata = pdev->dev.platform_data;
pr_debug("cpm_uart_drv_remove: Removing CPM UART %d\n",
cpm_uart_port_map[pdata->fs_no]);
uart_remove_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port);
return 0;
}
static struct device_driver cpm_smc_uart_driver = {
.name = "fsl-cpm-smc:uart",
.bus = &platform_bus_type,
.probe = cpm_uart_drv_probe,
.remove = cpm_uart_drv_remove,
};
static struct device_driver cpm_scc_uart_driver = {
.name = "fsl-cpm-scc:uart",
.bus = &platform_bus_type,
.probe = cpm_uart_drv_probe,
.remove = cpm_uart_drv_remove,
};
/*
This is supposed to match uart devices on platform bus,
*/
static int match_is_uart (struct device* dev, void* data)
{
struct platform_device* pdev = container_of(dev, struct platform_device, dev);
int ret = 0;
/* this was setfunc as uart */
if(strstr(pdev->name,":uart")) {
ret = 1;
}
return ret;
}
static int cpm_uart_init(void) {
int ret;
int i;
struct device *dev;
printk(KERN_INFO "Serial: CPM driver $Revision: 0.02 $\n");
/* lookup the bus for uart devices */
dev = bus_find_device(&platform_bus_type, NULL, 0, match_is_uart);
/* There are devices on the bus - all should be OK */
if (dev) {
cpm_uart_count();
cpm_reg.nr = cpm_uart_nr;
if (!(ret = uart_register_driver(&cpm_reg))) {
if ((ret = driver_register(&cpm_smc_uart_driver))) {
uart_unregister_driver(&cpm_reg);
return ret;
}
if ((ret = driver_register(&cpm_scc_uart_driver))) {
driver_unregister(&cpm_scc_uart_driver);
uart_unregister_driver(&cpm_reg);
}
}
} else {
/* No capable platform devices found - falling back to legacy mode */
pr_info("cpm_uart: WARNING: no UART devices found on platform bus!\n");
pr_info(
"cpm_uart: the driver will guess configuration, but this mode is no longer supported.\n");
#ifndef CONFIG_SERIAL_CPM_CONSOLE
ret = cpm_uart_init_portdesc();
if (ret)
return ret;
#endif
cpm_reg.nr = cpm_uart_nr;
ret = uart_register_driver(&cpm_reg);
if (ret)
return ret;
for (i = 0; i < cpm_uart_nr; i++) {
int con = cpm_uart_port_map[i];
cpm_uart_ports[con].port.line = i;
cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF;
uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port);
}
}
return ret;
}
static void __exit cpm_uart_exit(void)
{
int i;
for (i = 0; i < cpm_uart_nr; i++) {
int con = cpm_uart_port_map[i];
uart_remove_one_port(&cpm_reg, &cpm_uart_ports[con].port);
}
driver_unregister(&cpm_scc_uart_driver);
driver_unregister(&cpm_smc_uart_driver);
uart_unregister_driver(&cpm_reg);
}

54
drivers/serial/cpm_uart/cpm_uart_cpm1.c
View File

@ -81,58 +81,11 @@ void cpm_line_cr_cmd(int line, int cmd)
void smc1_lineif(struct uart_cpm_port *pinfo)
{
volatile cpm8xx_t *cp = cpmp;
(void)cp; /* fix warning */
#if defined (CONFIG_MPC885ADS)
/* Enable SMC1 transceivers */
{
cp->cp_pepar |= 0x000000c0;
cp->cp_pedir &= ~0x000000c0;
cp->cp_peso &= ~0x00000040;
cp->cp_peso |= 0x00000080;
}
#elif defined (CONFIG_MPC86XADS)
unsigned int iobits = 0x000000c0;
if (!pinfo->is_portb) {
cp->cp_pbpar |= iobits;
cp->cp_pbdir &= ~iobits;
cp->cp_pbodr &= ~iobits;
} else {
((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits;
((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
}
#endif
pinfo->brg = 1;
}
void smc2_lineif(struct uart_cpm_port *pinfo)
{
volatile cpm8xx_t *cp = cpmp;
(void)cp; /* fix warning */
#if defined (CONFIG_MPC885ADS)
cp->cp_pepar |= 0x00000c00;
cp->cp_pedir &= ~0x00000c00;
cp->cp_peso &= ~0x00000400;
cp->cp_peso |= 0x00000800;
#elif defined (CONFIG_MPC86XADS)
unsigned int iobits = 0x00000c00;
if (!pinfo->is_portb) {
cp->cp_pbpar |= iobits;
cp->cp_pbdir &= ~iobits;
cp->cp_pbodr &= ~iobits;
} else {
((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits;
((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
}
#endif
pinfo->brg = 2;
}
@ -191,7 +144,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
/* was hostalloc but changed cause it blows away the */
/* large tlb mapping when pinning the kernel area */
mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8));
dma_addr = 0;
dma_addr = (u32)mem_addr;
} else
mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
GFP_KERNEL);
@ -204,8 +157,9 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
}
pinfo->dp_addr = dp_offset;
pinfo->mem_addr = mem_addr;
pinfo->dma_addr = dma_addr;
pinfo->mem_addr = mem_addr; /* virtual address*/
pinfo->dma_addr = dma_addr; /* physical address*/
pinfo->mem_size = memsz;
pinfo->rx_buf = mem_addr;
pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos

14
drivers/serial/cpm_uart/cpm_uart_cpm2.c
View File

@ -142,21 +142,12 @@ void scc2_lineif(struct uart_cpm_port *pinfo)
* be supported in a sane fashion.
*/
#ifndef CONFIG_STX_GP3
#ifdef CONFIG_MPC8560_ADS
volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
io->iop_ppard |= 0x00000018;
io->iop_psord &= ~0x00000008; /* Rx */
io->iop_psord &= ~0x00000010; /* Tx */
io->iop_pdird &= ~0x00000008; /* Rx */
io->iop_pdird |= 0x00000010; /* Tx */
#else
volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
io->iop_pparb |= 0x008b0000;
io->iop_pdirb |= 0x00880000;
io->iop_psorb |= 0x00880000;
io->iop_pdirb &= ~0x00030000;
io->iop_psorb &= ~0x00030000;
#endif
#endif
cpm2_immr->im_cpmux.cmx_scr &= 0xff00ffff;
cpm2_immr->im_cpmux.cmx_scr |= 0x00090000;
@ -218,8 +209,10 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
if (is_con)
if (is_con) {
mem_addr = alloc_bootmem(memsz);
dma_addr = mem_addr;
}
else
mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
GFP_KERNEL);
@ -234,6 +227,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
pinfo->dp_addr = dp_offset;
pinfo->mem_addr = mem_addr;
pinfo->dma_addr = dma_addr;
pinfo->mem_size = memsz;
pinfo->rx_buf = mem_addr;
pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos

1922
drivers/video/au1200fb.c
View File

File diff suppressed because it is too large Load Diff

2
fs/stat.c
View File

@ -261,7 +261,7 @@ asmlinkage long sys_newlstat(char __user *filename, struct stat __user *statbuf)
return error;
}
#ifndef __ARCH_WANT_STAT64
#if !defined(__ARCH_WANT_STAT64) || defined(__ARCH_WANT_SYS_NEWFSTATAT)
asmlinkage long sys_newfstatat(int dfd, char __user *filename,
struct stat __user *statbuf, int flag)
{

4
include/asm-i386/i387.h
View File

@ -58,13 +58,13 @@ static inline void __save_init_fpu( struct task_struct *tsk )
alternative_input(
"fnsave %[fx] ;fwait;" GENERIC_NOP8 GENERIC_NOP4,
"fxsave %[fx]\n"
"bt $7,%[fsw] ; jc 1f ; fnclex\n1:",
"bt $7,%[fsw] ; jnc 1f ; fnclex\n1:",
X86_FEATURE_FXSR,
[fx] "m" (tsk->thread.i387.fxsave),
[fsw] "m" (tsk->thread.i387.fxsave.swd) : "memory");
/* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
is pending. Clear the x87 state here by setting it to fixed
values. __per_cpu_offset[0] is a random variable that should be in L1 */
values. safe_address is a random variable that should be in L1 */
alternative_input(
GENERIC_NOP8 GENERIC_NOP2,
"emms\n\t" /* clear stack tags */

14
include/asm-powerpc/cputable.h
View File

@ -22,6 +22,7 @@
#define PPC_FEATURE_BOOKE 0x00008000
#define PPC_FEATURE_SMT 0x00004000
#define PPC_FEATURE_ICACHE_SNOOP 0x00002000
#define PPC_FEATURE_ARCH_2_05 0x00001000
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
@ -320,6 +321,11 @@ extern void do_cpu_ftr_fixups(unsigned long offset);
CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
CPU_FTR_MMCRA_SIHV | CPU_FTR_PURR)
#define CPU_FTRS_POWER6 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \
CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
CPU_FTR_PURR | CPU_FTR_CI_LARGE_PAGE)
#define CPU_FTRS_CELL (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
@ -331,8 +337,8 @@ extern void do_cpu_ftr_fixups(unsigned long offset);
#ifdef __powerpc64__
#define CPU_FTRS_POSSIBLE \
(CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \
CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_CELL | \
CPU_FTR_CI_LARGE_PAGE)
CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 | \
CPU_FTRS_CELL | CPU_FTR_CI_LARGE_PAGE)
#else
enum {
CPU_FTRS_POSSIBLE =
@ -376,8 +382,8 @@ enum {
#ifdef __powerpc64__
#define CPU_FTRS_ALWAYS \
(CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 & \
CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_CELL & \
CPU_FTRS_POSSIBLE)
CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_POWER6 & \
CPU_FTRS_CELL & CPU_FTRS_POSSIBLE)
#else
enum {
CPU_FTRS_ALWAYS =

6
include/asm-powerpc/io.h
View File

@ -9,6 +9,9 @@
* 2 of the License, or (at your option) any later version.
*/
/* Check of existence of legacy devices */
extern int check_legacy_ioport(unsigned long base_port);
#ifndef CONFIG_PPC64
#include <asm-ppc/io.h>
#else
@ -437,9 +440,6 @@ out:
#define dma_cache_wback(_start,_size) do { } while (0)
#define dma_cache_wback_inv(_start,_size) do { } while (0)
/* Check of existence of legacy devices */
extern int check_legacy_ioport(unsigned long base_port);
/*
* Convert a physical pointer to a virtual kernel pointer for /dev/mem

1
include/asm-powerpc/page_64.h
View File

@ -101,6 +101,7 @@ extern unsigned int HPAGE_SHIFT;
- (1U << GET_HTLB_AREA(addr))) & 0xffff)
#define ARCH_HAS_HUGEPAGE_ONLY_RANGE
#define ARCH_HAS_HUGETLB_FREE_PGD_RANGE
#define ARCH_HAS_PREPARE_HUGEPAGE_RANGE
#define ARCH_HAS_SETCLEAR_HUGE_PTE

2
include/asm-powerpc/pgalloc.h
View File

@ -17,11 +17,13 @@ extern kmem_cache_t *pgtable_cache[];
#define PTE_CACHE_NUM 0
#define PMD_CACHE_NUM 1
#define PGD_CACHE_NUM 2
#define HUGEPTE_CACHE_NUM 3
#else
#define PTE_CACHE_NUM 0
#define PMD_CACHE_NUM 1
#define PUD_CACHE_NUM 1
#define PGD_CACHE_NUM 0
#define HUGEPTE_CACHE_NUM 2
#endif
/*

20
include/asm-powerpc/unistd.h
View File

@ -304,10 +304,27 @@
#define __NR_splice 283
#define __NR_tee 284
#define __NR_vmsplice 285
#define __NR_openat 286
#define __NR_mkdirat 287
#define __NR_mknodat 288
#define __NR_fchownat 289
#define __NR_futimesat 290
#ifdef __powerpc64__
#define __NR_newfstatat 291
#else
#define __NR_fstatat64 291
#endif
#define __NR_unlinkat 292
#define __NR_renameat 293
#define __NR_linkat 294
#define __NR_symlinkat 295
#define __NR_readlinkat 296
#define __NR_fchmodat 297
#define __NR_faccessat 298
#ifdef __KERNEL__
#define __NR_syscalls 286
#define __NR_syscalls 299
#define __NR__exit __NR_exit
#define NR_syscalls __NR_syscalls
@ -456,6 +473,7 @@ type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6
#ifdef CONFIG_PPC64
#define __ARCH_WANT_COMPAT_SYS_TIME
#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
#define __ARCH_WANT_SYS_NEWFSTATAT
#endif
/*

2
include/asm-ppc/ppc_sys.h
View File

@ -39,6 +39,8 @@
#error "need definition of ppc_sys_devices"
#endif
#define PPC_SYS_IORESOURCE_FIXUPPED 0x00000001
struct ppc_sys_spec {
/* PPC sys is matched via (ID & mask) == value, id could be
* PVR, SVR, IMMR, * etc. */

1
include/asm-ppc/reg_booke.h
View File

@ -237,6 +237,7 @@ do { \
#endif
/* Bit definitions for CCR1. */
#define CCR1_DPC 0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */
#define CCR1_TCS 0x00000080 /* Timer Clock Select */
/* Bit definitions for the MCSR. */

2
sound/ppc/toonie.c
View File

@ -335,7 +335,7 @@ static void toonie_cleanup(struct snd_pmac *chip)
chip->mixer_data = NULL;
}
int snd_pmac_toonie_init(struct snd_pmac *chip)
int __init snd_pmac_toonie_init(struct snd_pmac *chip)
{
struct pmac_toonie *mix;