net: phy: Adding SGMII support for Marvell 88ee1145 driver
Additional code to m88e1145_config_init function to allow the driver to support SGMII mode. Signed-off-by: Viet Nga Dao <vndao@altera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
62b9c8d037
commit
b02241755d
|
@ -50,9 +50,13 @@
|
|||
#define MII_M1011_PHY_SCR 0x10
|
||||
#define MII_M1011_PHY_SCR_AUTO_CROSS 0x0060
|
||||
|
||||
#define MII_M1145_PHY_EXT_SR 0x1b
|
||||
#define MII_M1145_PHY_EXT_CR 0x14
|
||||
#define MII_M1145_RGMII_RX_DELAY 0x0080
|
||||
#define MII_M1145_RGMII_TX_DELAY 0x0002
|
||||
#define MII_M1145_HWCFG_MODE_SGMII_NO_CLK 0x4
|
||||
#define MII_M1145_HWCFG_MODE_MASK 0xf
|
||||
#define MII_M1145_HWCFG_FIBER_COPPER_AUTO 0x8000
|
||||
|
||||
#define MII_M1111_PHY_LED_CONTROL 0x18
|
||||
#define MII_M1111_PHY_LED_DIRECT 0x4100
|
||||
|
@ -642,6 +646,7 @@ static int m88e1149_config_init(struct phy_device *phydev)
|
|||
static int m88e1145_config_init(struct phy_device *phydev)
|
||||
{
|
||||
int err;
|
||||
int temp;
|
||||
|
||||
/* Take care of errata E0 & E1 */
|
||||
err = phy_write(phydev, 0x1d, 0x001b);
|
||||
|
@ -698,6 +703,20 @@ static int m88e1145_config_init(struct phy_device *phydev)
|
|||
}
|
||||
}
|
||||
|
||||
if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
|
||||
temp = phy_read(phydev, MII_M1145_PHY_EXT_SR);
|
||||
if (temp < 0)
|
||||
return temp;
|
||||
|
||||
temp &= ~(MII_M1145_HWCFG_MODE_MASK);
|
||||
temp |= MII_M1145_HWCFG_MODE_SGMII_NO_CLK;
|
||||
temp |= MII_M1145_HWCFG_FIBER_COPPER_AUTO;
|
||||
|
||||
err = phy_write(phydev, MII_M1145_PHY_EXT_SR, temp);
|
||||
if (err < 0)
|
||||
return err;
|
||||
}
|
||||
|
||||
err = marvell_of_reg_init(phydev);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
|
Loading…
Reference in New Issue