Merge branch 'marco-timer-cleanup-rebase' of git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel into next/soc

From Barry Song, this adds support for a new SoC from CSR; marco. It's
SMP, uses GIC instead of VIC and in general needs a bit of rework of
the platform code for setup, which this branch contains.

* 'marco-timer-cleanup-rebase' of git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel:
  ARM: PRIMA2: provide two DEBUG_LL ports for prima2 and marco
  ARM: PRIMA2: add new SiRFmarco SMP SoC infrastructures
  ARM: PRIMA2: irq: make prima2 irq can work even we enable GIC for Marco
  ARM: PRIMA2: rtciobg: it is also compatible with marco
  ARM: PRIMA2: rstc: enable the support for Marco
  ARM: PRIMA2: mv timer to timer-prima2 as we will add timer-marco
  ARM: PRIMA2: initialize l2x0 according to mach from DT
  ARM: PRIMA2: enable AUTO_ZRELADDR for SIRF in Kconfig
  ARM: PRIMA2: add CSR SiRFmarco device tree .dts

Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson 2013-01-27 23:03:42 -08:00
commit af70fdc947
23 changed files with 1588 additions and 35 deletions

View File

@ -1,3 +1,9 @@
prima2 "cb" evaluation board
CSR SiRFprimaII and SiRFmarco device tree bindings.
========================================
Required root node properties:
- compatible = "sirf,prima2-cb", "sirf,prima2";
- compatible:
- "sirf,prima2-cb" : prima2 "cb" evaluation board
- "sirf,marco-cb" : marco "cb" evaluation board
- "sirf,prima2" : prima2 device based board
- "sirf,marco" : marco device based board

View File

@ -393,6 +393,7 @@ config ARCH_GEMINI
config ARCH_SIRF
bool "CSR SiRF"
select ARCH_REQUIRE_GPIOLIB
select AUTO_ZRELADDR
select COMMON_CLK
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP

View File

@ -386,6 +386,20 @@ choice
Say Y here if you want kernel low-level debugging support
on Tegra based platforms.
config DEBUG_SIRFPRIMA2_UART1
bool "Kernel low-level debugging messages via SiRFprimaII UART1"
depends on ARCH_PRIMA2
help
Say Y here if you want the debug print routines to direct
their output to the uart1 port on SiRFprimaII devices.
config DEBUG_SIRFMARCO_UART1
bool "Kernel low-level debugging messages via SiRFmarco UART1"
depends on ARCH_MARCO
help
Say Y here if you want the debug print routines to direct
their output to the uart1 port on SiRFmarco devices.
config DEBUG_VEXPRESS_UART0_DETECT
bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
depends on ARCH_VEXPRESS && CPU_CP15_MMU

View File

@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
kirkwood-ts219-6281.dtb \
kirkwood-ts219-6282.dtb \
kirkwood-openblocks_a6.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
msm8960-cdp.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \

View File

@ -0,0 +1,54 @@
/*
* DTS file for CSR SiRFmarco Evaluation Board
*
* Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
/dts-v1/;
/include/ "marco.dtsi"
/ {
model = "CSR SiRFmarco Evaluation Board";
compatible = "sirf,marco-cb", "sirf,marco";
memory {
reg = <0x40000000 0x60000000>;
};
axi {
peri-iobg {
uart1: uart@cc060000 {
status = "okay";
};
uart2: uart@cc070000 {
status = "okay";
};
i2c0: i2c@cc0e0000 {
status = "okay";
fpga-cpld@4d {
compatible = "sirf,fpga-cpld";
reg = <0x4d>;
};
};
spi1: spi@cc170000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins_a>;
spi@0 {
compatible = "spidev";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
pci-iobg {
sd0: sdhci@cd000000 {
bus-width = <8>;
status = "okay";
};
};
};
};
};

View File

@ -0,0 +1,756 @@
/*
* DTS file for CSR SiRFmarco SoC
*
* Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
/include/ "skeleton.dtsi"
/ {
compatible = "sirf,marco";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&gic>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
};
};
axi {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x40000000 0x40000000 0xa0000000>;
l2-cache-controller@c0030000 {
compatible = "sirf,marco-pl310-cache", "arm,pl310-cache";
reg = <0xc0030000 0x1000>;
interrupts = <0 59 0>;
arm,tag-latency = <1 1 1>;
arm,data-latency = <1 1 1>;
arm,filter-ranges = <0x40000000 0x80000000>;
};
gic: interrupt-controller@c0011000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0xc0011000 0x1000>,
<0xc0010100 0x0100>;
};
rstc-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xc2000000 0xc2000000 0x1000000>;
reset-controller@c2000000 {
compatible = "sirf,marco-rstc";
reg = <0xc2000000 0x10000>;
};
};
sys-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xc3000000 0xc3000000 0x1000000>;
clock-controller@c3000000 {
compatible = "sirf,marco-clkc";
reg = <0xc3000000 0x1000>;
interrupts = <0 3 0>;
};
rsc-controller@c3010000 {
compatible = "sirf,marco-rsc";
reg = <0xc3010000 0x1000>;
};
};
mem-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xc4000000 0xc4000000 0x1000000>;
memory-controller@c4000000 {
compatible = "sirf,marco-memc";
reg = <0xc4000000 0x10000>;
interrupts = <0 27 0>;
};
};
disp-iobg0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xc5000000 0xc5000000 0x1000000>;
display0@c5000000 {
compatible = "sirf,marco-lcd";
reg = <0xc5000000 0x10000>;
interrupts = <0 30 0>;
};
vpp0@c5010000 {
compatible = "sirf,marco-vpp";
reg = <0xc5010000 0x10000>;
interrupts = <0 31 0>;
};
};
disp-iobg1 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xc6000000 0xc6000000 0x1000000>;
display1@c6000000 {
compatible = "sirf,marco-lcd";
reg = <0xc6000000 0x10000>;
interrupts = <0 62 0>;
};
vpp1@c6010000 {
compatible = "sirf,marco-vpp";
reg = <0xc6010000 0x10000>;
interrupts = <0 63 0>;
};
};
graphics-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xc8000000 0xc8000000 0x1000000>;
graphics@c8000000 {
compatible = "powervr,sgx540";
reg = <0xc8000000 0x1000000>;
interrupts = <0 6 0>;
};
};
multimedia-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xc9000000 0xc9000000 0x1000000>;
multimedia@a0000000 {
compatible = "sirf,marco-video-codec";
reg = <0xc9000000 0x1000000>;
interrupts = <0 5 0>;
};
};
dsp-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xca000000 0xca000000 0x2000000>;
dspif@ca000000 {
compatible = "sirf,marco-dspif";
reg = <0xca000000 0x10000>;
interrupts = <0 9 0>;
};
gps@ca010000 {
compatible = "sirf,marco-gps";
reg = <0xca010000 0x10000>;
interrupts = <0 7 0>;
};
dsp@cb000000 {
compatible = "sirf,marco-dsp";
reg = <0xcb000000 0x1000000>;
interrupts = <0 8 0>;
};
};
peri-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xcc000000 0xcc000000 0x2000000>;
timer@cc020000 {
compatible = "sirf,marco-tick";
reg = <0xcc020000 0x1000>;
interrupts = <0 0 0>,
<0 1 0>,
<0 2 0>,
<0 49 0>,
<0 50 0>,
<0 51 0>;
};
nand@cc030000 {
compatible = "sirf,marco-nand";
reg = <0xcc030000 0x10000>;
interrupts = <0 41 0>;
};
audio@cc040000 {
compatible = "sirf,marco-audio";
reg = <0xcc040000 0x10000>;
interrupts = <0 35 0>;
};
uart0: uart@cc050000 {
cell-index = <0>;
compatible = "sirf,marco-uart";
reg = <0xcc050000 0x1000>;
interrupts = <0 17 0>;
fifosize = <128>;
status = "disabled";
};
uart1: uart@cc060000 {
cell-index = <1>;
compatible = "sirf,marco-uart";
reg = <0xcc060000 0x1000>;
interrupts = <0 18 0>;
fifosize = <32>;
status = "disabled";
};
uart2: uart@cc070000 {
cell-index = <2>;
compatible = "sirf,marco-uart";
reg = <0xcc070000 0x1000>;
interrupts = <0 19 0>;
fifosize = <128>;
status = "disabled";
};
uart3: uart@cc190000 {
cell-index = <3>;
compatible = "sirf,marco-uart";
reg = <0xcc190000 0x1000>;
interrupts = <0 66 0>;
fifosize = <128>;
status = "disabled";
};
uart4: uart@cc1a0000 {
cell-index = <4>;
compatible = "sirf,marco-uart";
reg = <0xcc1a0000 0x1000>;
interrupts = <0 69 0>;
fifosize = <128>;
status = "disabled";
};
usp0: usp@cc080000 {
cell-index = <0>;
compatible = "sirf,marco-usp";
reg = <0xcc080000 0x10000>;
interrupts = <0 20 0>;
status = "disabled";
};
usp1: usp@cc090000 {
cell-index = <1>;
compatible = "sirf,marco-usp";
reg = <0xcc090000 0x10000>;
interrupts = <0 21 0>;
status = "disabled";
};
usp2: usp@cc0a0000 {
cell-index = <2>;
compatible = "sirf,marco-usp";
reg = <0xcc0a0000 0x10000>;
interrupts = <0 22 0>;
status = "disabled";
};
dmac0: dma-controller@cc0b0000 {
cell-index = <0>;
compatible = "sirf,marco-dmac";
reg = <0xcc0b0000 0x10000>;
interrupts = <0 12 0>;
};
dmac1: dma-controller@cc160000 {
cell-index = <1>;
compatible = "sirf,marco-dmac";
reg = <0xcc160000 0x10000>;
interrupts = <0 13 0>;
};
vip@cc0c0000 {
compatible = "sirf,marco-vip";
reg = <0xcc0c0000 0x10000>;
};
spi0: spi@cc0d0000 {
cell-index = <0>;
compatible = "sirf,marco-spi";
reg = <0xcc0d0000 0x10000>;
interrupts = <0 15 0>;
sirf,spi-num-chipselects = <1>;
cs-gpios = <&gpio 0 0>;
sirf,spi-dma-rx-channel = <25>;
sirf,spi-dma-tx-channel = <20>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi1: spi@cc170000 {
cell-index = <1>;
compatible = "sirf,marco-spi";
reg = <0xcc170000 0x10000>;
interrupts = <0 16 0>;
sirf,spi-num-chipselects = <1>;
cs-gpios = <&gpio 0 0>;
sirf,spi-dma-rx-channel = <12>;
sirf,spi-dma-tx-channel = <13>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c0: i2c@cc0e0000 {
cell-index = <0>;
compatible = "sirf,marco-i2c";
reg = <0xcc0e0000 0x10000>;
interrupts = <0 24 0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c1: i2c@cc0f0000 {
cell-index = <1>;
compatible = "sirf,marco-i2c";
reg = <0xcc0f0000 0x10000>;
interrupts = <0 25 0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
tsc@cc110000 {
compatible = "sirf,marco-tsc";
reg = <0xcc110000 0x10000>;
interrupts = <0 33 0>;
};
gpio: pinctrl@cc120000 {
#gpio-cells = <2>;
#interrupt-cells = <2>;
compatible = "sirf,marco-pinctrl";
reg = <0xcc120000 0x10000>;
interrupts = <0 43 0>,
<0 44 0>,
<0 45 0>,
<0 46 0>,
<0 47 0>;
gpio-controller;
interrupt-controller;
lcd_16pins_a: lcd0_0 {
lcd {
sirf,pins = "lcd_16bitsgrp";
sirf,function = "lcd_16bits";
};
};
lcd_18pins_a: lcd0_1 {
lcd {
sirf,pins = "lcd_18bitsgrp";
sirf,function = "lcd_18bits";
};
};
lcd_24pins_a: lcd0_2 {
lcd {
sirf,pins = "lcd_24bitsgrp";
sirf,function = "lcd_24bits";
};
};
lcdrom_pins_a: lcdrom0_0 {
lcd {
sirf,pins = "lcdromgrp";
sirf,function = "lcdrom";
};
};
uart0_pins_a: uart0_0 {
uart {
sirf,pins = "uart0grp";
sirf,function = "uart0";
};
};
uart1_pins_a: uart1_0 {
uart {
sirf,pins = "uart1grp";
sirf,function = "uart1";
};
};
uart2_pins_a: uart2_0 {
uart {
sirf,pins = "uart2grp";
sirf,function = "uart2";
};
};
uart2_noflow_pins_a: uart2_1 {
uart {
sirf,pins = "uart2_nostreamctrlgrp";
sirf,function = "uart2_nostreamctrl";
};
};
spi0_pins_a: spi0_0 {
spi {
sirf,pins = "spi0grp";
sirf,function = "spi0";
};
};
spi1_pins_a: spi1_0 {
spi {
sirf,pins = "spi1grp";
sirf,function = "spi1";
};
};
i2c0_pins_a: i2c0_0 {
i2c {
sirf,pins = "i2c0grp";
sirf,function = "i2c0";
};
};
i2c1_pins_a: i2c1_0 {
i2c {
sirf,pins = "i2c1grp";
sirf,function = "i2c1";
};
};
pwm0_pins_a: pwm0_0 {
pwm {
sirf,pins = "pwm0grp";
sirf,function = "pwm0";
};
};
pwm1_pins_a: pwm1_0 {
pwm {
sirf,pins = "pwm1grp";
sirf,function = "pwm1";
};
};
pwm2_pins_a: pwm2_0 {
pwm {
sirf,pins = "pwm2grp";
sirf,function = "pwm2";
};
};
pwm3_pins_a: pwm3_0 {
pwm {
sirf,pins = "pwm3grp";
sirf,function = "pwm3";
};
};
gps_pins_a: gps_0 {
gps {
sirf,pins = "gpsgrp";
sirf,function = "gps";
};
};
vip_pins_a: vip_0 {
vip {
sirf,pins = "vipgrp";
sirf,function = "vip";
};
};
sdmmc0_pins_a: sdmmc0_0 {
sdmmc0 {
sirf,pins = "sdmmc0grp";
sirf,function = "sdmmc0";
};
};
sdmmc1_pins_a: sdmmc1_0 {
sdmmc1 {
sirf,pins = "sdmmc1grp";
sirf,function = "sdmmc1";
};
};
sdmmc2_pins_a: sdmmc2_0 {
sdmmc2 {
sirf,pins = "sdmmc2grp";
sirf,function = "sdmmc2";
};
};
sdmmc3_pins_a: sdmmc3_0 {
sdmmc3 {
sirf,pins = "sdmmc3grp";
sirf,function = "sdmmc3";
};
};
sdmmc4_pins_a: sdmmc4_0 {
sdmmc4 {
sirf,pins = "sdmmc4grp";
sirf,function = "sdmmc4";
};
};
sdmmc5_pins_a: sdmmc5_0 {
sdmmc5 {
sirf,pins = "sdmmc5grp";
sirf,function = "sdmmc5";
};
};
i2s_pins_a: i2s_0 {
i2s {
sirf,pins = "i2sgrp";
sirf,function = "i2s";
};
};
ac97_pins_a: ac97_0 {
ac97 {
sirf,pins = "ac97grp";
sirf,function = "ac97";
};
};
nand_pins_a: nand_0 {
nand {
sirf,pins = "nandgrp";
sirf,function = "nand";
};
};
usp0_pins_a: usp0_0 {
usp0 {
sirf,pins = "usp0grp";
sirf,function = "usp0";
};
};
usp1_pins_a: usp1_0 {
usp1 {
sirf,pins = "usp1grp";
sirf,function = "usp1";
};
};
usp2_pins_a: usp2_0 {
usp2 {
sirf,pins = "usp2grp";
sirf,function = "usp2";
};
};
usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus_0 {
usb0_utmi_drvbus {
sirf,pins = "usb0_utmi_drvbusgrp";
sirf,function = "usb0_utmi_drvbus";
};
};
usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus_0 {
usb1_utmi_drvbus {
sirf,pins = "usb1_utmi_drvbusgrp";
sirf,function = "usb1_utmi_drvbus";
};
};
warm_rst_pins_a: warm_rst_0 {
warm_rst {
sirf,pins = "warm_rstgrp";
sirf,function = "warm_rst";
};
};
pulse_count_pins_a: pulse_count_0 {
pulse_count {
sirf,pins = "pulse_countgrp";
sirf,function = "pulse_count";
};
};
cko0_rst_pins_a: cko0_rst_0 {
cko0_rst {
sirf,pins = "cko0_rstgrp";
sirf,function = "cko0_rst";
};
};
cko1_rst_pins_a: cko1_rst_0 {
cko1_rst {
sirf,pins = "cko1_rstgrp";
sirf,function = "cko1_rst";
};
};
};
pwm@cc130000 {
compatible = "sirf,marco-pwm";
reg = <0xcc130000 0x10000>;
};
efusesys@cc140000 {
compatible = "sirf,marco-efuse";
reg = <0xcc140000 0x10000>;
};
pulsec@cc150000 {
compatible = "sirf,marco-pulsec";
reg = <0xcc150000 0x10000>;
interrupts = <0 48 0>;
};
pci-iobg {
compatible = "sirf,marco-pciiobg", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xcd000000 0xcd000000 0x1000000>;
sd0: sdhci@cd000000 {
cell-index = <0>;
compatible = "sirf,marco-sdhc";
reg = <0xcd000000 0x100000>;
interrupts = <0 38 0>;
status = "disabled";
};
sd1: sdhci@cd100000 {
cell-index = <1>;
compatible = "sirf,marco-sdhc";
reg = <0xcd100000 0x100000>;
interrupts = <0 38 0>;
status = "disabled";
};
sd2: sdhci@cd200000 {
cell-index = <2>;
compatible = "sirf,marco-sdhc";
reg = <0xcd200000 0x100000>;
interrupts = <0 23 0>;
status = "disabled";
};
sd3: sdhci@cd300000 {
cell-index = <3>;
compatible = "sirf,marco-sdhc";
reg = <0xcd300000 0x100000>;
interrupts = <0 23 0>;
status = "disabled";
};
sd4: sdhci@cd400000 {
cell-index = <4>;
compatible = "sirf,marco-sdhc";
reg = <0xcd400000 0x100000>;
interrupts = <0 39 0>;
status = "disabled";
};
sd5: sdhci@cd500000 {
cell-index = <5>;
compatible = "sirf,marco-sdhc";
reg = <0xcd500000 0x100000>;
interrupts = <0 39 0>;
status = "disabled";
};
pci-copy@cd900000 {
compatible = "sirf,marco-pcicp";
reg = <0xcd900000 0x100000>;
interrupts = <0 40 0>;
};
rom-interface@cda00000 {
compatible = "sirf,marco-romif";
reg = <0xcda00000 0x100000>;
};
};
};
rtc-iobg {
compatible = "sirf,marco-rtciobg", "sirf-marco-rtciobg-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0xc1000000 0x10000>;
gpsrtc@1000 {
compatible = "sirf,marco-gpsrtc";
reg = <0x1000 0x1000>;
interrupts = <0 55 0>,
<0 56 0>,
<0 57 0>;
};
sysrtc@2000 {
compatible = "sirf,marco-sysrtc";
reg = <0x2000 0x1000>;
interrupts = <0 52 0>,
<0 53 0>,
<0 54 0>;
};
pwrc@3000 {
compatible = "sirf,marco-pwrc";
reg = <0x3000 0x1000>;
interrupts = <0 32 0>;
};
};
uus-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xce000000 0xce000000 0x1000000>;
usb0: usb@ce000000 {
compatible = "chipidea,ci13611a-marco";
reg = <0xce000000 0x10000>;
interrupts = <0 10 0>;
};
usb1: usb@ce010000 {
compatible = "chipidea,ci13611a-marco";
reg = <0xce010000 0x10000>;
interrupts = <0 11 0>;
};
security@ce020000 {
compatible = "sirf,marco-security";
reg = <0xce020000 0x10000>;
interrupts = <0 42 0>;
};
};
can-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xd0000000 0xd0000000 0x1000000>;
can0: can@d0000000 {
compatible = "sirf,marco-can";
reg = <0xd0000000 0x10000>;
};
can1: can@d0010000 {
compatible = "sirf,marco-can";
reg = <0xd0010000 0x10000>;
};
};
lvds-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xd1000000 0xd1000000 0x1000000>;
lvds@d1000000 {
compatible = "sirf,marco-lvds";
reg = <0xd1000000 0x10000>;
interrupts = <0 64 0>;
};
};
};
};

View File

@ -11,6 +11,9 @@ CONFIG_PARTITION_ADVANCED=y
CONFIG_BSD_DISKLABEL=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_ARCH_SIRF=y
# CONFIG_SWP_EMULATE is not set
CONFIG_SMP=y
CONFIG_SCHED_MC=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_KEXEC=y

View File

@ -11,6 +11,16 @@ config ARCH_PRIMA2
help
Support for CSR SiRFSoC ARM Cortex A9 Platform
config ARCH_MARCO
bool "CSR SiRFSoC MARCO ARM Cortex A9 Platform"
default y
select ARM_GIC
select CPU_V7
select HAVE_SMP
select SMP_ON_UP
help
Support for CSR SiRFSoC ARM Cortex A9 Platform
endmenu
config SIRF_IRQ

View File

@ -1,4 +1,3 @@
obj-y := timer.o
obj-y += rstc.o
obj-y += common.o
obj-y += rtciobrg.o
@ -6,3 +5,7 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o
obj-$(CONFIG_CACHE_L2X0) += l2x0.o
obj-$(CONFIG_SUSPEND) += pm.o sleep.o
obj-$(CONFIG_SIRF_IRQ) += irq.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o
obj-$(CONFIG_ARCH_MARCO) += timer-marco.o

View File

@ -8,9 +8,11 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/of_irq.h>
#include <asm/sizes.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include "common.h"
@ -30,6 +32,12 @@ void __init sirfsoc_init_late(void)
sirfsoc_pm_init();
}
static __init void sirfsoc_map_io(void)
{
sirfsoc_map_lluart();
sirfsoc_map_scu();
}
#ifdef CONFIG_ARCH_PRIMA2
static const char *prima2_dt_match[] __initdata = {
"sirf,prima2",
@ -38,9 +46,12 @@ static const char *prima2_dt_match[] __initdata = {
DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)")
/* Maintainer: Barry Song <baohua.song@csr.com> */
.map_io = sirfsoc_map_lluart,
.map_io = sirfsoc_map_io,
.init_irq = sirfsoc_of_irq_init,
.init_time = sirfsoc_timer_init,
.init_time = sirfsoc_prima2_timer_init,
#ifdef CONFIG_MULTI_IRQ_HANDLER
.handle_irq = sirfsoc_handle_irq,
#endif
.dma_zone_size = SZ_256M,
.init_machine = sirfsoc_mach_init,
.init_late = sirfsoc_init_late,
@ -48,3 +59,33 @@ DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)")
.restart = sirfsoc_restart,
MACHINE_END
#endif
#ifdef CONFIG_ARCH_MARCO
static const struct of_device_id marco_irq_match[] __initconst = {
{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
{ /* sentinel */ }
};
static void __init marco_init_irq(void)
{
of_irq_init(marco_irq_match);
}
static const char *marco_dt_match[] __initdata = {
"sirf,marco",
NULL
};
DT_MACHINE_START(MARCO_DT, "Generic MARCO (Flattened Device Tree)")
/* Maintainer: Barry Song <baohua.song@csr.com> */
.smp = smp_ops(sirfsoc_smp_ops),
.map_io = sirfsoc_map_io,
.init_irq = marco_init_irq,
.init_time = sirfsoc_marco_timer_init,
.handle_irq = gic_handle_irq,
.init_machine = sirfsoc_mach_init,
.init_late = sirfsoc_init_late,
.dt_compat = marco_dt_match,
.restart = sirfsoc_restart,
MACHINE_END
#endif

View File

@ -11,12 +11,19 @@
#include <linux/init.h>
#include <asm/mach/time.h>
#include <asm/exception.h>
extern void sirfsoc_timer_init(void);
extern void sirfsoc_prima2_timer_init(void);
extern void sirfsoc_marco_timer_init(void);
extern struct smp_operations sirfsoc_smp_ops;
extern void sirfsoc_secondary_startup(void);
extern void sirfsoc_cpu_die(unsigned int cpu);
extern void __init sirfsoc_of_irq_init(void);
extern void __init sirfsoc_of_clk_init(void);
extern void sirfsoc_restart(char, const char *);
extern asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs);
#ifndef CONFIG_DEBUG_LL
static inline void sirfsoc_map_lluart(void) {}
@ -24,6 +31,12 @@ static inline void sirfsoc_map_lluart(void) {}
extern void __init sirfsoc_map_lluart(void);
#endif
#ifndef CONFIG_SMP
static inline void sirfsoc_map_scu(void) {}
#else
extern void sirfsoc_map_scu(void);
#endif
#ifdef CONFIG_SUSPEND
extern int sirfsoc_pm_init(void);
#else

View File

@ -0,0 +1,79 @@
/*
* Entry of the second core for CSR Marco dual-core SMP SoCs
*
* Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#include <linux/linkage.h>
#include <linux/init.h>
__INIT
/*
* Cold boot and hardware reset show different behaviour,
* system will be always panic if we warm-reset the board
* Here we invalidate L1 of CPU1 to make sure there isn't
* uninitialized data written into memory later
*/
ENTRY(v7_invalidate_l1)
mov r0, #0
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
mcr p15, 2, r0, c0, c0, 0
mrc p15, 1, r0, c0, c0, 0
ldr r1, =0x7fff
and r2, r1, r0, lsr #13
ldr r1, =0x3ff
and r3, r1, r0, lsr #3 @ NumWays - 1
add r2, r2, #1 @ NumSets
and r0, r0, #0x7
add r0, r0, #4 @ SetShift
clz r1, r3 @ WayShift
add r4, r3, #1 @ NumWays
1: sub r2, r2, #1 @ NumSets--
mov r3, r4 @ Temp = NumWays
2: subs r3, r3, #1 @ Temp--
mov r5, r3, lsl r1
mov r6, r2, lsl r0
orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
mcr p15, 0, r5, c7, c6, 2
bgt 2b
cmp r2, #0
bgt 1b
dsb
isb
mov pc, lr
ENDPROC(v7_invalidate_l1)
/*
* SIRFSOC specific entry point for secondary CPUs. This provides
* a "holding pen" into which all secondary cores are held until we're
* ready for them to initialise.
*/
ENTRY(sirfsoc_secondary_startup)
bl v7_invalidate_l1
mrc p15, 0, r0, c0, c0, 5
and r0, r0, #15
adr r4, 1f
ldmia r4, {r5, r6}
sub r4, r4, r5
add r6, r6, r4
pen: ldr r7, [r6]
cmp r7, r0
bne pen
/*
* we've been released from the holding pen: secondary_stack
* should now contain the SVC stack for this core
*/
b secondary_startup
ENDPROC(sirfsoc_secondary_startup)
.align
1: .long .
.long pen_release

View File

@ -0,0 +1,41 @@
/*
* CPU hotplug support for CSR Marco dual-core SMP SoCs
*
* Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/smp.h>
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
static inline void platform_do_lowpower(unsigned int cpu)
{
flush_cache_all();
/* we put the platform to just WFI */
for (;;) {
__asm__ __volatile__("dsb\n\t" "wfi\n\t"
: : : "memory");
if (pen_release == cpu_logical_map(cpu)) {
/*
* OK, proper wakeup, we're done
*/
break;
}
}
}
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
void sirfsoc_cpu_die(unsigned int cpu)
{
platform_do_lowpower(cpu);
}

View File

@ -10,8 +10,8 @@
#define __ASM_ARCH_IRQS_H
#define SIRFSOC_INTENAL_IRQ_START 0
#define SIRFSOC_INTENAL_IRQ_END 59
#define SIRFSOC_INTENAL_IRQ_END 127
#define SIRFSOC_GPIO_IRQ_START (SIRFSOC_INTENAL_IRQ_END + 1)
#define NR_IRQS 220
#define NR_IRQS 288
#endif

View File

@ -10,7 +10,13 @@
#define __MACH_PRIMA2_SIRFSOC_UART_H
/* UART-1: used as serial debug port */
#if defined(CONFIG_DEBUG_SIRFPRIMA2_UART1)
#define SIRFSOC_UART1_PA_BASE 0xb0060000
#elif defined(CONFIG_DEBUG_SIRFMARCO_UART1)
#define SIRFSOC_UART1_PA_BASE 0xcc060000
#else
#define SIRFSOC_UART1_PA_BASE 0
#endif
#define SIRFSOC_UART1_VA_BASE SIRFSOC_VA(0x060000)
#define SIRFSOC_UART1_SIZE SZ_4K

View File

@ -25,6 +25,9 @@ static __inline__ void putc(char c)
* during kernel decompression, all mappings are flat:
* virt_addr == phys_addr
*/
if (!SIRFSOC_UART1_PA_BASE)
return;
while (__raw_readl((void __iomem *)SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_STATUS)
& SIRFSOC_UART1_TXFIFO_FULL)
barrier();

View File

@ -9,17 +9,19 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <mach/hardware.h>
#include <asm/mach/irq.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/irqdomain.h>
#include <linux/syscore_ops.h>
#include <asm/mach/irq.h>
#include <asm/exception.h>
#include <mach/hardware.h>
#define SIRFSOC_INT_RISC_MASK0 0x0018
#define SIRFSOC_INT_RISC_MASK1 0x001C
#define SIRFSOC_INT_RISC_LEVEL0 0x0020
#define SIRFSOC_INT_RISC_LEVEL1 0x0024
#define SIRFSOC_INIT_IRQ_ID 0x0038
void __iomem *sirfsoc_intc_base;
@ -52,6 +54,16 @@ static __init void sirfsoc_irq_init(void)
writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1);
}
asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs)
{
u32 irqstat, irqnr;
irqstat = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INIT_IRQ_ID);
irqnr = irqstat & 0xff;
handle_IRQ(irqnr, regs);
}
static struct of_device_id intc_ids[] = {
{ .compatible = "sirf,prima2-intc" },
{},

View File

@ -11,19 +11,38 @@
#include <linux/of.h>
#include <asm/hardware/cache-l2x0.h>
static struct of_device_id prima2_l2x0_ids[] = {
{ .compatible = "sirf,prima2-pl310-cache" },
struct l2x0_aux
{
u32 val;
u32 mask;
};
static struct l2x0_aux prima2_l2x0_aux __initconst = {
.val = 2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT,
.mask = 0,
};
static struct l2x0_aux marco_l2x0_aux __initconst = {
.val = (2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT) |
(1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT),
.mask = L2X0_AUX_CTRL_MASK,
};
static struct of_device_id sirf_l2x0_ids[] __initconst = {
{ .compatible = "sirf,prima2-pl310-cache", .data = &prima2_l2x0_aux, },
{ .compatible = "sirf,marco-pl310-cache", .data = &marco_l2x0_aux, },
{},
};
static int __init sirfsoc_l2x0_init(void)
{
struct device_node *np;
const struct l2x0_aux *aux;
np = of_find_matching_node(NULL, prima2_l2x0_ids);
np = of_find_matching_node(NULL, sirf_l2x0_ids);
if (np) {
pr_info("Initializing prima2 L2 cache\n");
return l2x0_of_init(0x40000, 0);
aux = of_match_node(sirf_l2x0_ids, np)->data;
return l2x0_of_init(aux->val, aux->mask);
}
return 0;

View File

@ -0,0 +1,163 @@
/*
* plat smp support for CSR Marco dual-core SMP SoCs
*
* Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/delay.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <asm/page.h>
#include <asm/mach/map.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
#include <asm/cacheflush.h>
#include <asm/cputype.h>
#include <asm/hardware/gic.h>
#include <mach/map.h>
#include "common.h"
static void __iomem *scu_base;
static void __iomem *rsc_base;
static DEFINE_SPINLOCK(boot_lock);
static struct map_desc scu_io_desc __initdata = {
.length = SZ_4K,
.type = MT_DEVICE,
};
void __init sirfsoc_map_scu(void)
{
unsigned long base;
/* Get SCU base */
asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
scu_io_desc.virtual = SIRFSOC_VA(base);
scu_io_desc.pfn = __phys_to_pfn(base);
iotable_init(&scu_io_desc, 1);
scu_base = (void __iomem *)SIRFSOC_VA(base);
}
static void __cpuinit sirfsoc_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
*/
gic_secondary_init(0);
/*
* let the primary processor know we're out of the
* pen, then head off into the C entry point
*/
pen_release = -1;
smp_wmb();
/*
* Synchronise with the boot thread.
*/
spin_lock(&boot_lock);
spin_unlock(&boot_lock);
}
static struct of_device_id rsc_ids[] = {
{ .compatible = "sirf,marco-rsc" },
{},
};
static int __cpuinit sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
struct device_node *np;
np = of_find_matching_node(NULL, rsc_ids);
if (!np)
return -ENODEV;
rsc_base = of_iomap(np, 0);
if (!rsc_base)
return -ENOMEM;
/*
* write the address of secondary startup into the sram register
* at offset 0x2C, then write the magic number 0x3CAF5D62 to the
* RSC register at offset 0x28, which is what boot rom code is
* waiting for. This would wake up the secondary core from WFE
*/
#define SIRFSOC_CPU1_JUMPADDR_OFFSET 0x2C
__raw_writel(virt_to_phys(sirfsoc_secondary_startup),
rsc_base + SIRFSOC_CPU1_JUMPADDR_OFFSET);
#define SIRFSOC_CPU1_WAKEMAGIC_OFFSET 0x28
__raw_writel(0x3CAF5D62,
rsc_base + SIRFSOC_CPU1_WAKEMAGIC_OFFSET);
/* make sure write buffer is drained */
mb();
spin_lock(&boot_lock);
/*
* The secondary processor is waiting to be released from
* the holding pen - release it, then wait for it to flag
* that it has been released by resetting pen_release.
*
* Note that "pen_release" is the hardware CPU ID, whereas
* "cpu" is Linux's internal ID.
*/
pen_release = cpu_logical_map(cpu);
__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
/*
* Send the secondary CPU SEV, thereby causing the boot monitor to read
* the JUMPADDR and WAKEMAGIC, and branch to the address found there.
*/
dsb_sev();
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
smp_rmb();
if (pen_release == -1)
break;
udelay(10);
}
/*
* now the secondary core is starting up let it run its
* calibrations, then wait for it to finish
*/
spin_unlock(&boot_lock);
return pen_release != -1 ? -ENOSYS : 0;
}
static void __init sirfsoc_smp_init_cpus(void)
{
set_smp_cross_call(gic_raise_softirq);
}
static void __init sirfsoc_smp_prepare_cpus(unsigned int max_cpus)
{
scu_enable(scu_base);
}
struct smp_operations sirfsoc_smp_ops __initdata = {
.smp_init_cpus = sirfsoc_smp_init_cpus,
.smp_prepare_cpus = sirfsoc_smp_prepare_cpus,
.smp_secondary_init = sirfsoc_secondary_init,
.smp_boot_secondary = sirfsoc_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = sirfsoc_cpu_die,
#endif
};

View File

@ -19,6 +19,7 @@ static DEFINE_MUTEX(rstc_lock);
static struct of_device_id rstc_ids[] = {
{ .compatible = "sirf,prima2-rstc" },
{ .compatible = "sirf,marco-rstc" },
{},
};
@ -42,16 +43,14 @@ early_initcall(sirfsoc_of_rstc_init);
int sirfsoc_reset_device(struct device *dev)
{
const unsigned int *prop = of_get_property(dev->of_node, "reset-bit", NULL);
unsigned int reset_bit;
u32 reset_bit;
if (!prop)
return -ENODEV;
reset_bit = be32_to_cpup(prop);
if (of_property_read_u32(dev->of_node, "reset-bit", &reset_bit))
return -EINVAL;
mutex_lock(&rstc_lock);
if (of_device_is_compatible(dev->of_node, "sirf,prima2-rstc")) {
/*
* Writing 1 to this bit resets corresponding block. Writing 0 to this
* bit de-asserts reset signal of the corresponding block.
@ -63,6 +62,18 @@ int sirfsoc_reset_device(struct device *dev)
msleep(10);
writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~reset_bit,
sirfsoc_rstc_base + (reset_bit / 32) * 4);
} else {
/*
* For MARCO and POLO
* Writing 1 to SET register resets corresponding block. Writing 1 to CLEAR
* register de-asserts reset signal of the corresponding block.
* datasheet doesn't require explicit delay between the set and clear
* of reset bit. it could be shorter if tests pass.
*/
writel(reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8);
msleep(10);
writel(reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4);
}
mutex_unlock(&rstc_lock);

View File

@ -104,6 +104,7 @@ EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_writel);
static const struct of_device_id rtciobrg_ids[] = {
{ .compatible = "sirf,prima2-rtciobg" },
{ .compatible = "sirf,marco-rtciobg" },
{}
};

View File

@ -0,0 +1,316 @@
/*
* System timer for CSR SiRFprimaII
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/clockchips.h>
#include <linux/clocksource.h>
#include <linux/bitops.h>
#include <linux/irq.h>
#include <linux/clk.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <asm/sched_clock.h>
#include <asm/localtimer.h>
#include <asm/mach/time.h>
#include "common.h"
#define SIRFSOC_TIMER_32COUNTER_0_CTRL 0x0000
#define SIRFSOC_TIMER_32COUNTER_1_CTRL 0x0004
#define SIRFSOC_TIMER_MATCH_0 0x0018
#define SIRFSOC_TIMER_MATCH_1 0x001c
#define SIRFSOC_TIMER_COUNTER_0 0x0048
#define SIRFSOC_TIMER_COUNTER_1 0x004c
#define SIRFSOC_TIMER_INTR_STATUS 0x0060
#define SIRFSOC_TIMER_WATCHDOG_EN 0x0064
#define SIRFSOC_TIMER_64COUNTER_CTRL 0x0068
#define SIRFSOC_TIMER_64COUNTER_LO 0x006c
#define SIRFSOC_TIMER_64COUNTER_HI 0x0070
#define SIRFSOC_TIMER_64COUNTER_LOAD_LO 0x0074
#define SIRFSOC_TIMER_64COUNTER_LOAD_HI 0x0078
#define SIRFSOC_TIMER_64COUNTER_RLATCHED_LO 0x007c
#define SIRFSOC_TIMER_64COUNTER_RLATCHED_HI 0x0080
#define SIRFSOC_TIMER_REG_CNT 6
static const u32 sirfsoc_timer_reg_list[SIRFSOC_TIMER_REG_CNT] = {
SIRFSOC_TIMER_WATCHDOG_EN,
SIRFSOC_TIMER_32COUNTER_0_CTRL,
SIRFSOC_TIMER_32COUNTER_1_CTRL,
SIRFSOC_TIMER_64COUNTER_CTRL,
SIRFSOC_TIMER_64COUNTER_RLATCHED_LO,
SIRFSOC_TIMER_64COUNTER_RLATCHED_HI,
};
static u32 sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT];
static void __iomem *sirfsoc_timer_base;
static void __init sirfsoc_of_timer_map(void);
/* disable count and interrupt */
static inline void sirfsoc_timer_count_disable(int idx)
{
writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx) & ~0x7,
sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx);
}
/* enable count and interrupt */
static inline void sirfsoc_timer_count_enable(int idx)
{
writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx) | 0x7,
sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx);
}
/* timer interrupt handler */
static irqreturn_t sirfsoc_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *ce = dev_id;
int cpu = smp_processor_id();
/* clear timer interrupt */
writel_relaxed(BIT(cpu), sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS);
if (ce->mode == CLOCK_EVT_MODE_ONESHOT)
sirfsoc_timer_count_disable(cpu);
ce->event_handler(ce);
return IRQ_HANDLED;
}
/* read 64-bit timer counter */
static cycle_t sirfsoc_timer_read(struct clocksource *cs)
{
u64 cycles;
writel_relaxed((readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) |
BIT(0)) & ~BIT(1), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL);
cycles = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_RLATCHED_HI);
cycles = (cycles << 32) | readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_RLATCHED_LO);
return cycles;
}
static int sirfsoc_timer_set_next_event(unsigned long delta,
struct clock_event_device *ce)
{
int cpu = smp_processor_id();
writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_0 +
4 * cpu);
writel_relaxed(delta, sirfsoc_timer_base + SIRFSOC_TIMER_MATCH_0 +
4 * cpu);
/* enable the tick */
sirfsoc_timer_count_enable(cpu);
return 0;
}
static void sirfsoc_timer_set_mode(enum clock_event_mode mode,
struct clock_event_device *ce)
{
switch (mode) {
case CLOCK_EVT_MODE_ONESHOT:
/* enable in set_next_event */
break;
default:
break;
}
sirfsoc_timer_count_disable(smp_processor_id());
}
static void sirfsoc_clocksource_suspend(struct clocksource *cs)
{
int i;
for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++)
sirfsoc_timer_reg_val[i] = readl_relaxed(sirfsoc_timer_base + sirfsoc_timer_reg_list[i]);
}
static void sirfsoc_clocksource_resume(struct clocksource *cs)
{
int i;
for (i = 0; i < SIRFSOC_TIMER_REG_CNT - 2; i++)
writel_relaxed(sirfsoc_timer_reg_val[i], sirfsoc_timer_base + sirfsoc_timer_reg_list[i]);
writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 2],
sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_LO);
writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 1],
sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_HI);
writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) |
BIT(1) | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL);
}
static struct clock_event_device sirfsoc_clockevent = {
.name = "sirfsoc_clockevent",
.rating = 200,
.features = CLOCK_EVT_FEAT_ONESHOT,
.set_mode = sirfsoc_timer_set_mode,
.set_next_event = sirfsoc_timer_set_next_event,
};
static struct clocksource sirfsoc_clocksource = {
.name = "sirfsoc_clocksource",
.rating = 200,
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.read = sirfsoc_timer_read,
.suspend = sirfsoc_clocksource_suspend,
.resume = sirfsoc_clocksource_resume,
};
static struct irqaction sirfsoc_timer_irq = {
.name = "sirfsoc_timer0",
.flags = IRQF_TIMER | IRQF_NOBALANCING,
.handler = sirfsoc_timer_interrupt,
.dev_id = &sirfsoc_clockevent,
};
#ifdef CONFIG_LOCAL_TIMERS
static struct irqaction sirfsoc_timer1_irq = {
.name = "sirfsoc_timer1",
.flags = IRQF_TIMER | IRQF_NOBALANCING,
.handler = sirfsoc_timer_interrupt,
};
static int __cpuinit sirfsoc_local_timer_setup(struct clock_event_device *ce)
{
/* Use existing clock_event for cpu 0 */
if (!smp_processor_id())
return 0;
ce->irq = sirfsoc_timer1_irq.irq;
ce->name = "local_timer";
ce->features = sirfsoc_clockevent.features;
ce->rating = sirfsoc_clockevent.rating;
ce->set_mode = sirfsoc_timer_set_mode;
ce->set_next_event = sirfsoc_timer_set_next_event;
ce->shift = sirfsoc_clockevent.shift;
ce->mult = sirfsoc_clockevent.mult;
ce->max_delta_ns = sirfsoc_clockevent.max_delta_ns;
ce->min_delta_ns = sirfsoc_clockevent.min_delta_ns;
sirfsoc_timer1_irq.dev_id = ce;
BUG_ON(setup_irq(ce->irq, &sirfsoc_timer1_irq));
irq_set_affinity(sirfsoc_timer1_irq.irq, cpumask_of(1));
clockevents_register_device(ce);
return 0;
}
static void sirfsoc_local_timer_stop(struct clock_event_device *ce)
{
sirfsoc_timer_count_disable(1);
remove_irq(sirfsoc_timer1_irq.irq, &sirfsoc_timer1_irq);
}
static struct local_timer_ops sirfsoc_local_timer_ops __cpuinitdata = {
.setup = sirfsoc_local_timer_setup,
.stop = sirfsoc_local_timer_stop,
};
#endif /* CONFIG_LOCAL_TIMERS */
static void __init sirfsoc_clockevent_init(void)
{
clockevents_calc_mult_shift(&sirfsoc_clockevent, CLOCK_TICK_RATE, 60);
sirfsoc_clockevent.max_delta_ns =
clockevent_delta2ns(-2, &sirfsoc_clockevent);
sirfsoc_clockevent.min_delta_ns =
clockevent_delta2ns(2, &sirfsoc_clockevent);
sirfsoc_clockevent.cpumask = cpumask_of(0);
clockevents_register_device(&sirfsoc_clockevent);
#ifdef CONFIG_LOCAL_TIMERS
local_timer_register(&sirfsoc_local_timer_ops);
#endif
}
/* initialize the kernel jiffy timer source */
void __init sirfsoc_marco_timer_init(void)
{
unsigned long rate;
u32 timer_div;
struct clk *clk;
/* initialize clocking early, we want to set the OS timer */
sirfsoc_of_clk_init();
/* timer's input clock is io clock */
clk = clk_get_sys("io", NULL);
BUG_ON(IS_ERR(clk));
rate = clk_get_rate(clk);
BUG_ON(rate < CLOCK_TICK_RATE);
BUG_ON(rate % CLOCK_TICK_RATE);
sirfsoc_of_timer_map();
/* Initialize the timer dividers */
timer_div = rate / CLOCK_TICK_RATE - 1;
writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL);
writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL);
writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_1_CTRL);
/* Initialize timer counters to 0 */
writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_LO);
writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_HI);
writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) |
BIT(1) | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL);
writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_0);
writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_1);
/* Clear all interrupts */
writel_relaxed(0xFFFF, sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS);
BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq));
sirfsoc_clockevent_init();
}
static struct of_device_id timer_ids[] = {
{ .compatible = "sirf,marco-tick" },
{},
};
static void __init sirfsoc_of_timer_map(void)
{
struct device_node *np;
np = of_find_matching_node(NULL, timer_ids);
if (!np)
return;
sirfsoc_timer_base = of_iomap(np, 0);
if (!sirfsoc_timer_base)
panic("unable to map timer cpu registers\n");
sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0);
if (!sirfsoc_timer_irq.irq)
panic("No irq passed for timer0 via DT\n");
#ifdef CONFIG_LOCAL_TIMERS
sirfsoc_timer1_irq.irq = irq_of_parse_and_map(np, 1);
if (!sirfsoc_timer1_irq.irq)
panic("No irq passed for timer1 via DT\n");
#endif
of_node_put(np);
}

View File

@ -181,7 +181,7 @@ static void __init sirfsoc_clockevent_init(void)
}
/* initialize the kernel jiffy timer source */
void __init sirfsoc_timer_init(void)
void __init sirfsoc_prima2_timer_init(void)
{
unsigned long rate;
struct clk *clk;
@ -220,14 +220,14 @@ static struct of_device_id timer_ids[] = {
{},
};
void __init sirfsoc_of_timer_map(void)
static void __init sirfsoc_of_timer_map(void)
{
struct device_node *np;
const unsigned int *intspec;
np = of_find_matching_node(NULL, timer_ids);
if (!np)
panic("unable to find compatible timer node in dtb\n");
return;
sirfsoc_timer_base = of_iomap(np, 0);
if (!sirfsoc_timer_base)
panic("unable to map timer cpu registers\n");