phy: micrel.c: Enable ksz9031 energy-detect power-down mode
Set bit 0 in register 1C.23 to enable the EDPD feature of the KSZ9031 PHY. This reduces power consumption when the link is down. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
a44c984f1e
commit
af70c1f92d
|
@ -439,6 +439,10 @@ static int ksz9021_config_init(struct phy_device *phydev)
|
|||
#define MII_KSZ9031RN_TX_DATA_PAD_SKEW 6
|
||||
#define MII_KSZ9031RN_CLK_PAD_SKEW 8
|
||||
|
||||
/* MMD Address 0x1C */
|
||||
#define MII_KSZ9031RN_EDPD 0x23
|
||||
#define MII_KSZ9031RN_EDPD_ENABLE BIT(0)
|
||||
|
||||
static int ksz9031_extended_write(struct phy_device *phydev,
|
||||
u8 mode, u32 dev_addr, u32 regnum, u16 val)
|
||||
{
|
||||
|
@ -510,6 +514,18 @@ static int ksz9031_center_flp_timing(struct phy_device *phydev)
|
|||
return genphy_restart_aneg(phydev);
|
||||
}
|
||||
|
||||
/* Enable energy-detect power-down mode */
|
||||
static int ksz9031_enable_edpd(struct phy_device *phydev)
|
||||
{
|
||||
int reg;
|
||||
|
||||
reg = ksz9031_extended_read(phydev, OP_DATA, 0x1C, MII_KSZ9031RN_EDPD);
|
||||
if (reg < 0)
|
||||
return reg;
|
||||
return ksz9031_extended_write(phydev, OP_DATA, 0x1C, MII_KSZ9031RN_EDPD,
|
||||
reg | MII_KSZ9031RN_EDPD_ENABLE);
|
||||
}
|
||||
|
||||
static int ksz9031_config_init(struct phy_device *phydev)
|
||||
{
|
||||
const struct device *dev = &phydev->mdio.dev;
|
||||
|
@ -525,6 +541,11 @@ static int ksz9031_config_init(struct phy_device *phydev)
|
|||
};
|
||||
static const char *control_skews[2] = {"txen-skew-ps", "rxdv-skew-ps"};
|
||||
const struct device *dev_walker;
|
||||
int result;
|
||||
|
||||
result = ksz9031_enable_edpd(phydev);
|
||||
if (result < 0)
|
||||
return result;
|
||||
|
||||
/* The Micrel driver has a deprecated option to place phy OF
|
||||
* properties in the MAC node. Walk up the tree of devices to
|
||||
|
|
Loading…
Reference in New Issue