gpio: omap: move pm runtime in irq_chip.irq_bus_lock/sync_unlock
The PM runtime API can't be used in atomic contex on -RT even if it's configured as irqsafe. As result, below error report can be seen when PM runtime API called from IRQ chip's callbacks irq_startup/irq_shutdown/irq_set_type, because they are protected by RAW spinlock: BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917 in_atomic(): 1, irqs_disabled(): 128, pid: 96, name: insmod 3 locks held by insmod/96: #0: (&dev->mutex){......}, at: [<c04752c8>] __driver_attach+0x54/0xa0 #1: (&dev->mutex){......}, at: [<c04752d4>] __driver_attach+0x60/0xa0 #2: (class){......}, at: [<c00a408c>] __irq_get_desc_lock+0x60/0xa4 irq event stamp: 1834 hardirqs last enabled at (1833): [<c06ab2a4>] _raw_spin_unlock_irqrestore+0x88/0x90 hardirqs last disabled at (1834): [<c06ab068>] _raw_spin_lock_irqsave+0x2c/0x64 softirqs last enabled at (0): [<c003d220>] copy_process.part.52+0x410/0x19d8 softirqs last disabled at (0): [< (null)>] (null) Preemption disabled at:[< (null)>] (null) CPU: 1 PID: 96 Comm: insmod Tainted: G W O 4.1.3-rt3-00618-g57e2387-dirty #184 Hardware name: Generic DRA74X (Flattened Device Tree) [<c00190f4>] (unwind_backtrace) from [<c0014734>] (show_stack+0x20/0x24) [<c0014734>] (show_stack) from [<c06a62ec>] (dump_stack+0x88/0xdc) [<c06a62ec>] (dump_stack) from [<c006ca44>] (___might_sleep+0x198/0x2a8) [<c006ca44>] (___might_sleep) from [<c06ab6d4>] (rt_spin_lock+0x30/0x70) [<c06ab6d4>] (rt_spin_lock) from [<c04815ac>] (__pm_runtime_resume+0x68/0xa4) [<c04815ac>] (__pm_runtime_resume) from [<c04123f4>] (omap_gpio_irq_type+0x188/0x1d8) [<c04123f4>] (omap_gpio_irq_type) from [<c00a64e4>] (__irq_set_trigger+0x68/0x130) [<c00a64e4>] (__irq_set_trigger) from [<c00a7bc4>] (irq_set_irq_type+0x44/0x6c) [<c00a7bc4>] (irq_set_irq_type) from [<c00abbf8>] (irq_create_of_mapping+0x120/0x174) [<c00abbf8>] (irq_create_of_mapping) from [<c0577b74>] (of_irq_get+0x48/0x58) [<c0577b74>] (of_irq_get) from [<c0540a14>] (i2c_device_probe+0x54/0x15c) [<c0540a14>] (i2c_device_probe) from [<c04750dc>] (driver_probe_device+0x184/0x2c8) [<c04750dc>] (driver_probe_device) from [<c0475310>] (__driver_attach+0x9c/0xa0) [<c0475310>] (__driver_attach) from [<c0473238>] (bus_for_each_dev+0x7c/0xb0) [<c0473238>] (bus_for_each_dev) from [<c0474af4>] (driver_attach+0x28/0x30) [<c0474af4>] (driver_attach) from [<c0474760>] (bus_add_driver+0x154/0x200) [<c0474760>] (bus_add_driver) from [<c0476348>] (driver_register+0x88/0x108) [<c0476348>] (driver_register) from [<c0541600>] (i2c_register_driver+0x3c/0x90) [<c0541600>] (i2c_register_driver) from [<bf003018>] (pcf857x_init+0x18/0x24 [gpio_pcf857x]) [<bf003018>] (pcf857x_init [gpio_pcf857x]) from [<c000998c>] (do_one_initcall+0x128/0x1e8) [<c000998c>] (do_one_initcall) from [<c06a4220>] (do_init_module+0x6c/0x1bc) [<c06a4220>] (do_init_module) from [<c00dd0c8>] (load_module+0x18e8/0x21c4) [<c00dd0c8>] (load_module) from [<c00ddaa0>] (SyS_init_module+0xfc/0x158) [<c00ddaa0>] (SyS_init_module) from [<c000ff40>] (ret_fast_syscall+0x0/0x54) The IRQ chip interface defines only two callbacks which are executed in non-atomic contex - irq_bus_lock/irq_bus_sync_unlock, so lets move PM runtime calls there. Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Austin Schuh <austin@peloton-tech.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
parent
69d301fdd1
commit
aca82d1cbb
|
@ -496,9 +496,6 @@ static int omap_gpio_irq_type(struct irq_data *d, unsigned type)
|
|||
(type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
|
||||
return -EINVAL;
|
||||
|
||||
if (!BANK_USED(bank))
|
||||
pm_runtime_get_sync(bank->dev);
|
||||
|
||||
raw_spin_lock_irqsave(&bank->lock, flags);
|
||||
retval = omap_set_gpio_triggering(bank, offset, type);
|
||||
if (retval) {
|
||||
|
@ -521,8 +518,6 @@ static int omap_gpio_irq_type(struct irq_data *d, unsigned type)
|
|||
return 0;
|
||||
|
||||
error:
|
||||
if (!BANK_USED(bank))
|
||||
pm_runtime_put(bank->dev);
|
||||
return retval;
|
||||
}
|
||||
|
||||
|
@ -797,9 +792,6 @@ static unsigned int omap_gpio_irq_startup(struct irq_data *d)
|
|||
unsigned long flags;
|
||||
unsigned offset = d->hwirq;
|
||||
|
||||
if (!BANK_USED(bank))
|
||||
pm_runtime_get_sync(bank->dev);
|
||||
|
||||
raw_spin_lock_irqsave(&bank->lock, flags);
|
||||
|
||||
if (!LINE_USED(bank->mod_usage, offset))
|
||||
|
@ -815,8 +807,6 @@ static unsigned int omap_gpio_irq_startup(struct irq_data *d)
|
|||
return 0;
|
||||
err:
|
||||
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
||||
if (!BANK_USED(bank))
|
||||
pm_runtime_put(bank->dev);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
@ -835,6 +825,19 @@ static void omap_gpio_irq_shutdown(struct irq_data *d)
|
|||
omap_clear_gpio_debounce(bank, offset);
|
||||
omap_disable_gpio_module(bank, offset);
|
||||
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
||||
}
|
||||
|
||||
static void omap_gpio_irq_bus_lock(struct irq_data *data)
|
||||
{
|
||||
struct gpio_bank *bank = omap_irq_data_get_bank(data);
|
||||
|
||||
if (!BANK_USED(bank))
|
||||
pm_runtime_get_sync(bank->dev);
|
||||
}
|
||||
|
||||
static void gpio_irq_bus_sync_unlock(struct irq_data *data)
|
||||
{
|
||||
struct gpio_bank *bank = omap_irq_data_get_bank(data);
|
||||
|
||||
/*
|
||||
* If this is the last IRQ to be freed in the bank,
|
||||
|
@ -1183,6 +1186,8 @@ static int omap_gpio_probe(struct platform_device *pdev)
|
|||
irqc->irq_unmask = omap_gpio_unmask_irq,
|
||||
irqc->irq_set_type = omap_gpio_irq_type,
|
||||
irqc->irq_set_wake = omap_gpio_wake_enable,
|
||||
irqc->irq_bus_lock = omap_gpio_irq_bus_lock,
|
||||
irqc->irq_bus_sync_unlock = gpio_irq_bus_sync_unlock,
|
||||
irqc->name = dev_name(&pdev->dev);
|
||||
|
||||
bank->irq = platform_get_irq(pdev, 0);
|
||||
|
|
Loading…
Reference in New Issue