From ac9399d09544525ff4713ab942cb44a7cea29a84 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Sun, 3 Jan 2016 16:05:16 +1100 Subject: [PATCH] ncr5380: Always escalate bad target time-out in NCR5380_select() Remove the restart_select and targets_present variables introduced in Linux v1.1.38. The former was used only for a questionable debug printk and the latter "so we can call a select failure a retryable condition". Well, retrying select failure in general is a different problem to a target that doesn't assert BSY. We need to handle these two cases differently; the latter case can be left to the SCSI ML. Signed-off-by: Finn Thain Reviewed-by: Hannes Reinecke Tested-by: Ondrej Zary Tested-by: Michael Schmitz Signed-off-by: Martin K. Petersen --- drivers/scsi/NCR5380.c | 13 ------------- drivers/scsi/NCR5380.h | 6 ------ drivers/scsi/atari_NCR5380.c | 13 ------------- 3 files changed, 32 deletions(-) diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c index ce80a5c65eb3..051684b08a77 100644 --- a/drivers/scsi/NCR5380.c +++ b/drivers/scsi/NCR5380.c @@ -790,7 +790,6 @@ static int NCR5380_init(struct Scsi_Host *instance, int flags) #ifdef REAL_DMA hostdata->dmalen = 0; #endif - hostdata->targets_present = 0; hostdata->connected = NULL; hostdata->issue_queue = NULL; hostdata->disconnected_queue = NULL; @@ -1186,8 +1185,6 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) if (hostdata->selecting) goto part2; - hostdata->restart_select = 0; - NCR5380_dprint(NDEBUG_ARBITRATION, instance); dprintk(NDEBUG_ARBITRATION, "scsi%d : starting arbitration, id = %d\n", instance->host_no, instance->this_id); @@ -1363,21 +1360,12 @@ part2: if (!(NCR5380_read(STATUS_REG) & SR_BSY)) { NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - if (hostdata->targets_present & (1 << scmd_id(cmd))) { - printk(KERN_DEBUG "scsi%d : weirdness\n", instance->host_no); - if (hostdata->restart_select) - printk(KERN_DEBUG "\trestart select\n"); - NCR5380_dprint(NDEBUG_SELECTION, instance); - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - return -1; - } cmd->result = DID_BAD_TARGET << 16; cmd->scsi_done(cmd); NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); dprintk(NDEBUG_SELECTION, "scsi%d : target did not respond within 250ms\n", instance->host_no); return 0; } - hostdata->targets_present |= (1 << scmd_id(cmd)); /* * Since we followed the SCSI spec, and raised ATN while SEL @@ -2382,7 +2370,6 @@ static void NCR5380_reselect(struct Scsi_Host *instance) { */ NCR5380_write(MODE_REG, MR_BASE); - hostdata->restart_select = 1; target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask); dprintk(NDEBUG_SELECTION, "scsi%d : reselect\n", instance->host_no); diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h index 4a31f41b6027..25e28add0db8 100644 --- a/drivers/scsi/NCR5380.h +++ b/drivers/scsi/NCR5380.h @@ -257,9 +257,6 @@ struct NCR5380_hostdata { NCR5380_implementation_fields; /* implementation specific */ struct Scsi_Host *host; /* Host backpointer */ unsigned char id_mask, id_higher_mask; /* 1 << id, all bits greater */ - unsigned char targets_present; /* targets we have connected - to, so we can call a select - failure a retryable condition */ volatile unsigned char busy[8]; /* index = target, bit = lun */ #if defined(REAL_DMA) || defined(REAL_DMA_POLL) volatile int dma_len; /* requested length of DMA */ @@ -268,9 +265,6 @@ struct NCR5380_hostdata { volatile struct scsi_cmnd *connected; /* currently connected command */ volatile struct scsi_cmnd *issue_queue; /* waiting to be issued */ volatile struct scsi_cmnd *disconnected_queue; /* waiting for reconnect */ - volatile int restart_select; /* we have disconnected, - used to restart - NCR5380_select() */ int flags; unsigned long time_expires; /* in jiffies, set prior to sleeping */ int select_time; /* timer in select for target response */ diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c index 6c382d1c67ff..80f6830d9f3c 100644 --- a/drivers/scsi/atari_NCR5380.c +++ b/drivers/scsi/atari_NCR5380.c @@ -826,7 +826,6 @@ static int __init NCR5380_init(struct Scsi_Host *instance, int flags) #if defined (REAL_DMA) hostdata->dma_len = 0; #endif - hostdata->targets_present = 0; hostdata->connected = NULL; hostdata->issue_queue = NULL; hostdata->disconnected_queue = NULL; @@ -1409,7 +1408,6 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) unsigned long timeout; unsigned long flags; - hostdata->restart_select = 0; NCR5380_dprint(NDEBUG_ARBITRATION, instance); dprintk(NDEBUG_ARBITRATION, "scsi%d: starting arbitration, id = %d\n", HOSTNO, instance->this_id); @@ -1625,14 +1623,6 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) if (!(NCR5380_read(STATUS_REG) & SR_BSY)) { NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - if (hostdata->targets_present & (1 << cmd->device->id)) { - printk(KERN_ERR "scsi%d: weirdness\n", HOSTNO); - if (hostdata->restart_select) - printk(KERN_NOTICE "\trestart select\n"); - NCR5380_dprint(NDEBUG_ANY, instance); - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - return -1; - } cmd->result = DID_BAD_TARGET << 16; #ifdef SUPPORT_TAGS cmd_free_tag(cmd); @@ -1643,8 +1633,6 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) return 0; } - hostdata->targets_present |= (1 << cmd->device->id); - /* * Since we followed the SCSI spec, and raised ATN while SEL * was true but before BSY was false during selection, the information @@ -2605,7 +2593,6 @@ static void NCR5380_reselect(struct Scsi_Host *instance) */ NCR5380_write(MODE_REG, MR_BASE); - hostdata->restart_select = 1; target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask);