From ba4539ffc19b090841cd32ffe2c57d937e311857 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 29 Jul 2015 16:22:56 +0530 Subject: [PATCH 01/20] PM / OPP: Update bindings to make opp-hz a 64 bit value With a 32 bit value, the maximum frequency that the bindings can support is ~ 4 GHz. And that might fall short of what newer systems may have. Allow opp-hz to be a 64 bit big-endian value. Suggested-by: Stephen Boyd Suggested-by: Bartlomiej Zolnierkiewicz Signed-off-by: Viresh Kumar Acked-by: Rob Herring Signed-off-by: Rafael J. Wysocki --- .../devicetree/bindings/power/opp.txt | 40 +++++++++---------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/Documentation/devicetree/bindings/power/opp.txt b/Documentation/devicetree/bindings/power/opp.txt index 0d5e7c978121..0cb44dc21f97 100644 --- a/Documentation/devicetree/bindings/power/opp.txt +++ b/Documentation/devicetree/bindings/power/opp.txt @@ -88,7 +88,7 @@ This defines voltage-current-frequency combinations along with other related properties. Required properties: -- opp-hz: Frequency in Hz +- opp-hz: Frequency in Hz, expressed as a 64-bit big-endian integer. Optional properties: - opp-microvolt: voltage in micro Volts. @@ -158,20 +158,20 @@ Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together. opp-shared; opp00 { - opp-hz = <1000000000>; + opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <970000 975000 985000>; opp-microamp = <70000>; clock-latency-ns = <300000>; opp-suspend; }; opp01 { - opp-hz = <1100000000>; + opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <980000 1000000 1010000>; opp-microamp = <80000>; clock-latency-ns = <310000>; }; opp02 { - opp-hz = <1200000000>; + opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1025000>; clock-latency-ns = <290000>; turbo-mode; @@ -237,20 +237,20 @@ independently. */ opp00 { - opp-hz = <1000000000>; + opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <970000 975000 985000>; opp-microamp = <70000>; clock-latency-ns = <300000>; opp-suspend; }; opp01 { - opp-hz = <1100000000>; + opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <980000 1000000 1010000>; opp-microamp = <80000>; clock-latency-ns = <310000>; }; opp02 { - opp-hz = <1200000000>; + opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1025000>; opp-microamp = <90000; lock-latency-ns = <290000>; @@ -313,20 +313,20 @@ DVFS state together. opp-shared; opp00 { - opp-hz = <1000000000>; + opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <970000 975000 985000>; opp-microamp = <70000>; clock-latency-ns = <300000>; opp-suspend; }; opp01 { - opp-hz = <1100000000>; + opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <980000 1000000 1010000>; opp-microamp = <80000>; clock-latency-ns = <310000>; }; opp02 { - opp-hz = <1200000000>; + opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1025000>; opp-microamp = <90000>; clock-latency-ns = <290000>; @@ -339,20 +339,20 @@ DVFS state together. opp-shared; opp10 { - opp-hz = <1300000000>; + opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1045000 1050000 1055000>; opp-microamp = <95000>; clock-latency-ns = <400000>; opp-suspend; }; opp11 { - opp-hz = <1400000000>; + opp-hz = /bits/ 64 <1400000000>; opp-microvolt = <1075000>; opp-microamp = <100000>; clock-latency-ns = <400000>; }; opp12 { - opp-hz = <1500000000>; + opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <1010000 1100000 1110000>; opp-microamp = <95000>; clock-latency-ns = <400000>; @@ -379,7 +379,7 @@ Example 4: Handling multiple regulators opp-shared; opp00 { - opp-hz = <1000000000>; + opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <970000>, /* Supply 0 */ <960000>, /* Supply 1 */ <960000>; /* Supply 2 */ @@ -392,7 +392,7 @@ Example 4: Handling multiple regulators /* OR */ opp00 { - opp-hz = <1000000000>; + opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <970000 975000 985000>, /* Supply 0 */ <960000 965000 975000>, /* Supply 1 */ <960000 965000 975000>; /* Supply 2 */ @@ -405,7 +405,7 @@ Example 4: Handling multiple regulators /* OR */ opp00 { - opp-hz = <1000000000>; + opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <970000 975000 985000>, /* Supply 0 */ <960000 965000 975000>, /* Supply 1 */ <960000 965000 975000>; /* Supply 2 */ @@ -437,12 +437,12 @@ Example 5: Multiple OPP tables opp-shared; opp00 { - opp-hz = <600000000>; + opp-hz = /bits/ 64 <600000000>; ... }; opp01 { - opp-hz = <800000000>; + opp-hz = /bits/ 64 <800000000>; ... }; }; @@ -453,12 +453,12 @@ Example 5: Multiple OPP tables opp-shared; opp10 { - opp-hz = <1000000000>; + opp-hz = /bits/ 64 <1000000000>; ... }; opp11 { - opp-hz = <1100000000>; + opp-hz = /bits/ 64 <1100000000>; ... }; }; From 3566c5b277a41e912d15cd583c4604c95bb6b3f8 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 30 Jul 2015 22:27:19 +0530 Subject: [PATCH 02/20] PM / OPP: Create a directory for opp bindings More platform specific extended opp bindings will follow and it would be easy to manage them with a directory for opp. Lets create that and move the existing opp bindings into it. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- Documentation/devicetree/bindings/{power => opp}/opp.txt | 0 1 file changed, 0 insertions(+), 0 deletions(-) rename Documentation/devicetree/bindings/{power => opp}/opp.txt (100%) diff --git a/Documentation/devicetree/bindings/power/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt similarity index 100% rename from Documentation/devicetree/bindings/power/opp.txt rename to Documentation/devicetree/bindings/opp/opp.txt From 737002b5de3d15b3012feea17f782a628b24699b Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 29 Jul 2015 16:22:58 +0530 Subject: [PATCH 03/20] PM / OPP: Relocate few routines In order to prepare for the later commits, this relocates few routines towards the top as they will be used earlier in the code. Reviewed-by: Stephen Boyd Reviewed-by: Bartlomiej Zolnierkiewicz Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 277 ++++++++++++++++++++------------------- 1 file changed, 139 insertions(+), 138 deletions(-) diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 677fb2843553..8c3fd57975fb 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -437,6 +437,102 @@ static struct device_opp *_add_device_opp(struct device *dev) return dev_opp; } +/** + * _kfree_device_rcu() - Free device_opp RCU handler + * @head: RCU head + */ +static void _kfree_device_rcu(struct rcu_head *head) +{ + struct device_opp *device_opp = container_of(head, struct device_opp, rcu_head); + + kfree_rcu(device_opp, rcu_head); +} + +/** + * _kfree_opp_rcu() - Free OPP RCU handler + * @head: RCU head + */ +static void _kfree_opp_rcu(struct rcu_head *head) +{ + struct dev_pm_opp *opp = container_of(head, struct dev_pm_opp, rcu_head); + + kfree_rcu(opp, rcu_head); +} + +/** + * _opp_remove() - Remove an OPP from a table definition + * @dev_opp: points back to the device_opp struct this opp belongs to + * @opp: pointer to the OPP to remove + * + * This function removes an opp definition from the opp list. + * + * Locking: The internal device_opp and opp structures are RCU protected. + * It is assumed that the caller holds required mutex for an RCU updater + * strategy. + */ +static void _opp_remove(struct device_opp *dev_opp, + struct dev_pm_opp *opp) +{ + /* + * Notify the changes in the availability of the operable + * frequency/voltage list. + */ + srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_REMOVE, opp); + list_del_rcu(&opp->node); + call_srcu(&dev_opp->srcu_head.srcu, &opp->rcu_head, _kfree_opp_rcu); + + if (list_empty(&dev_opp->opp_list)) { + list_del_rcu(&dev_opp->node); + call_srcu(&dev_opp->srcu_head.srcu, &dev_opp->rcu_head, + _kfree_device_rcu); + } +} + +/** + * dev_pm_opp_remove() - Remove an OPP from OPP list + * @dev: device for which we do this operation + * @freq: OPP to remove with matching 'freq' + * + * This function removes an opp from the opp list. + * + * Locking: The internal device_opp and opp structures are RCU protected. + * Hence this function internally uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + */ +void dev_pm_opp_remove(struct device *dev, unsigned long freq) +{ + struct dev_pm_opp *opp; + struct device_opp *dev_opp; + bool found = false; + + /* Hold our list modification lock here */ + mutex_lock(&dev_opp_list_lock); + + dev_opp = _find_device_opp(dev); + if (IS_ERR(dev_opp)) + goto unlock; + + list_for_each_entry(opp, &dev_opp->opp_list, node) { + if (opp->rate == freq) { + found = true; + break; + } + } + + if (!found) { + dev_warn(dev, "%s: Couldn't find OPP with freq: %lu\n", + __func__, freq); + goto unlock; + } + + _opp_remove(dev_opp, opp); +unlock: + mutex_unlock(&dev_opp_list_lock); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_remove); + /** * _opp_add_dynamic() - Allocate a dynamic OPP. * @dev: device for which we do this operation @@ -569,102 +665,6 @@ int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt) } EXPORT_SYMBOL_GPL(dev_pm_opp_add); -/** - * _kfree_opp_rcu() - Free OPP RCU handler - * @head: RCU head - */ -static void _kfree_opp_rcu(struct rcu_head *head) -{ - struct dev_pm_opp *opp = container_of(head, struct dev_pm_opp, rcu_head); - - kfree_rcu(opp, rcu_head); -} - -/** - * _kfree_device_rcu() - Free device_opp RCU handler - * @head: RCU head - */ -static void _kfree_device_rcu(struct rcu_head *head) -{ - struct device_opp *device_opp = container_of(head, struct device_opp, rcu_head); - - kfree_rcu(device_opp, rcu_head); -} - -/** - * _opp_remove() - Remove an OPP from a table definition - * @dev_opp: points back to the device_opp struct this opp belongs to - * @opp: pointer to the OPP to remove - * - * This function removes an opp definition from the opp list. - * - * Locking: The internal device_opp and opp structures are RCU protected. - * It is assumed that the caller holds required mutex for an RCU updater - * strategy. - */ -static void _opp_remove(struct device_opp *dev_opp, - struct dev_pm_opp *opp) -{ - /* - * Notify the changes in the availability of the operable - * frequency/voltage list. - */ - srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_REMOVE, opp); - list_del_rcu(&opp->node); - call_srcu(&dev_opp->srcu_head.srcu, &opp->rcu_head, _kfree_opp_rcu); - - if (list_empty(&dev_opp->opp_list)) { - list_del_rcu(&dev_opp->node); - call_srcu(&dev_opp->srcu_head.srcu, &dev_opp->rcu_head, - _kfree_device_rcu); - } -} - -/** - * dev_pm_opp_remove() - Remove an OPP from OPP list - * @dev: device for which we do this operation - * @freq: OPP to remove with matching 'freq' - * - * This function removes an opp from the opp list. - * - * Locking: The internal device_opp and opp structures are RCU protected. - * Hence this function internally uses RCU updater strategy with mutex locks - * to keep the integrity of the internal data structures. Callers should ensure - * that this function is *NOT* called under RCU protection or in contexts where - * mutex cannot be locked. - */ -void dev_pm_opp_remove(struct device *dev, unsigned long freq) -{ - struct dev_pm_opp *opp; - struct device_opp *dev_opp; - bool found = false; - - /* Hold our list modification lock here */ - mutex_lock(&dev_opp_list_lock); - - dev_opp = _find_device_opp(dev); - if (IS_ERR(dev_opp)) - goto unlock; - - list_for_each_entry(opp, &dev_opp->opp_list, node) { - if (opp->rate == freq) { - found = true; - break; - } - } - - if (!found) { - dev_warn(dev, "%s: Couldn't find OPP with freq: %lu\n", - __func__, freq); - goto unlock; - } - - _opp_remove(dev_opp, opp); -unlock: - mutex_unlock(&dev_opp_list_lock); -} -EXPORT_SYMBOL_GPL(dev_pm_opp_remove); - /** * _opp_set_availability() - helper to set the availability of an opp * @dev: device for which we do this operation @@ -824,6 +824,49 @@ struct srcu_notifier_head *dev_pm_opp_get_notifier(struct device *dev) EXPORT_SYMBOL_GPL(dev_pm_opp_get_notifier); #ifdef CONFIG_OF +/** + * of_free_opp_table() - Free OPP table entries created from static DT entries + * @dev: device pointer used to lookup device OPPs. + * + * Free OPPs created using static entries present in DT. + * + * Locking: The internal device_opp and opp structures are RCU protected. + * Hence this function indirectly uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + */ +void of_free_opp_table(struct device *dev) +{ + struct device_opp *dev_opp; + struct dev_pm_opp *opp, *tmp; + + /* Check for existing list for 'dev' */ + dev_opp = _find_device_opp(dev); + if (IS_ERR(dev_opp)) { + int error = PTR_ERR(dev_opp); + + if (error != -ENODEV) + WARN(1, "%s: dev_opp: %d\n", + IS_ERR_OR_NULL(dev) ? + "Invalid device" : dev_name(dev), + error); + return; + } + + /* Hold our list modification lock here */ + mutex_lock(&dev_opp_list_lock); + + /* Free static OPPs */ + list_for_each_entry_safe(opp, tmp, &dev_opp->opp_list, node) { + if (!opp->dynamic) + _opp_remove(dev_opp, opp); + } + + mutex_unlock(&dev_opp_list_lock); +} +EXPORT_SYMBOL_GPL(of_free_opp_table); + /** * of_init_opp_table() - Initialize opp table from device tree * @dev: device pointer used to lookup device OPPs. @@ -882,46 +925,4 @@ int of_init_opp_table(struct device *dev) return 0; } EXPORT_SYMBOL_GPL(of_init_opp_table); - -/** - * of_free_opp_table() - Free OPP table entries created from static DT entries - * @dev: device pointer used to lookup device OPPs. - * - * Free OPPs created using static entries present in DT. - * - * Locking: The internal device_opp and opp structures are RCU protected. - * Hence this function indirectly uses RCU updater strategy with mutex locks - * to keep the integrity of the internal data structures. Callers should ensure - * that this function is *NOT* called under RCU protection or in contexts where - * mutex cannot be locked. - */ -void of_free_opp_table(struct device *dev) -{ - struct device_opp *dev_opp; - struct dev_pm_opp *opp, *tmp; - - /* Check for existing list for 'dev' */ - dev_opp = _find_device_opp(dev); - if (IS_ERR(dev_opp)) { - int error = PTR_ERR(dev_opp); - if (error != -ENODEV) - WARN(1, "%s: dev_opp: %d\n", - IS_ERR_OR_NULL(dev) ? - "Invalid device" : dev_name(dev), - error); - return; - } - - /* Hold our list modification lock here */ - mutex_lock(&dev_opp_list_lock); - - /* Free static OPPs */ - list_for_each_entry_safe(opp, tmp, &dev_opp->opp_list, node) { - if (!opp->dynamic) - _opp_remove(dev_opp, opp); - } - - mutex_unlock(&dev_opp_list_lock); -} -EXPORT_SYMBOL_GPL(of_free_opp_table); #endif From 3bac42caec612a1b82db7944570353cddca6a013 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 29 Jul 2015 16:22:59 +0530 Subject: [PATCH 04/20] PM / OPP: Create _remove_device_opp() for freeing dev_opp This will be used from multiple places later. Lets create a separate routine for that. Reviewed-by: Stephen Boyd Reviewed-by: Bartlomiej Zolnierkiewicz Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 8c3fd57975fb..7895fdd64192 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -448,6 +448,22 @@ static void _kfree_device_rcu(struct rcu_head *head) kfree_rcu(device_opp, rcu_head); } +/** + * _remove_device_opp() - Removes a device OPP table + * @dev_opp: device OPP table to be removed. + * + * Removes/frees device OPP table it it doesn't contain any OPPs. + */ +static void _remove_device_opp(struct device_opp *dev_opp) +{ + if (!list_empty(&dev_opp->opp_list)) + return; + + list_del_rcu(&dev_opp->node); + call_srcu(&dev_opp->srcu_head.srcu, &dev_opp->rcu_head, + _kfree_device_rcu); +} + /** * _kfree_opp_rcu() - Free OPP RCU handler * @head: RCU head @@ -481,11 +497,7 @@ static void _opp_remove(struct device_opp *dev_opp, list_del_rcu(&opp->node); call_srcu(&dev_opp->srcu_head.srcu, &opp->rcu_head, _kfree_opp_rcu); - if (list_empty(&dev_opp->opp_list)) { - list_del_rcu(&dev_opp->node); - call_srcu(&dev_opp->srcu_head.srcu, &dev_opp->rcu_head, - _kfree_device_rcu); - } + _remove_device_opp(dev_opp); } /** From aa5f2f854f03e6dc3dec8874bbcff1452b4bc09e Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 29 Jul 2015 16:23:00 +0530 Subject: [PATCH 05/20] PM / OPP: Allocate dev_opp from _add_device_opp() There is no need to complicate _opp_add_dynamic() with allocation of dev_opp as well. Allocate it from _add_device_opp() instead. Reviewed-by: Stephen Boyd Reviewed-by: Bartlomiej Zolnierkiewicz Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 54 +++++++++++++++++++++------------------- 1 file changed, 29 insertions(+), 25 deletions(-) diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 7895fdd64192..28d70c9f86ed 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -408,11 +408,11 @@ struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev, EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor); /** - * _add_device_opp() - Allocate a new device OPP table + * _add_device_opp() - Find device OPP table or allocate a new one * @dev: device for which we do this operation * - * New device node which uses OPPs - used when multiple devices with OPP tables - * are maintained. + * It tries to find an existing table first, if it couldn't find one, it + * allocates a new OPP table and returns that. * * Return: valid device_opp pointer if success, else NULL. */ @@ -420,6 +420,11 @@ static struct device_opp *_add_device_opp(struct device *dev) { struct device_opp *dev_opp; + /* Check for existing list for 'dev' first */ + dev_opp = _find_device_opp(dev); + if (!IS_ERR(dev_opp)) + return dev_opp; + /* * Allocate a new device OPP table. In the infrequent case where a new * device is needed to be added, we pay this penalty. @@ -575,7 +580,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_remove); static int _opp_add_dynamic(struct device *dev, unsigned long freq, long u_volt, bool dynamic) { - struct device_opp *dev_opp = NULL; + struct device_opp *dev_opp; struct dev_pm_opp *opp, *new_opp; struct list_head *head; int ret; @@ -592,19 +597,11 @@ static int _opp_add_dynamic(struct device *dev, unsigned long freq, new_opp->rate = freq; new_opp->u_volt = u_volt; new_opp->available = true; - new_opp->dynamic = dynamic; - /* Check for existing list for 'dev' */ - dev_opp = _find_device_opp(dev); - if (IS_ERR(dev_opp)) { - dev_opp = _add_device_opp(dev); - if (!dev_opp) { - ret = -ENOMEM; - goto free_opp; - } - - head = &dev_opp->opp_list; - goto list_add; + dev_opp = _add_device_opp(dev); + if (!dev_opp) { + ret = -ENOMEM; + goto free_opp; } /* @@ -612,15 +609,22 @@ static int _opp_add_dynamic(struct device *dev, unsigned long freq, * and discard if already present */ head = &dev_opp->opp_list; - list_for_each_entry_rcu(opp, &dev_opp->opp_list, node) { - if (new_opp->rate <= opp->rate) - break; - else - head = &opp->node; - } - /* Duplicate OPPs ? */ - if (new_opp->rate == opp->rate) { + /* + * Need to use &dev_opp->opp_list in the condition part of the 'for' + * loop, don't replace it with head otherwise it will become an infinite + * loop. + */ + list_for_each_entry_rcu(opp, &dev_opp->opp_list, node) { + if (new_opp->rate > opp->rate) { + head = &opp->node; + continue; + } + + if (new_opp->rate < opp->rate) + break; + + /* Duplicate OPPs */ ret = opp->available && new_opp->u_volt == opp->u_volt ? 0 : -EEXIST; @@ -630,7 +634,7 @@ static int _opp_add_dynamic(struct device *dev, unsigned long freq, goto free_opp; } -list_add: + new_opp->dynamic = dynamic; new_opp->dev_opp = dev_opp; list_add_rcu(&new_opp->node, head); mutex_unlock(&dev_opp_list_lock); From 23dacf6d2e993551ef3ae0629baf6f473930513c Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 29 Jul 2015 16:23:01 +0530 Subject: [PATCH 06/20] PM / OPP: Break _opp_add_dynamic() into smaller functions Later commits would add support for new OPP bindings and this would be required then. So, lets do it in a separate patch to make it easily reviewable. Another change worth noticing is INIT_LIST_HEAD(&opp->node). We weren't doing it earlier as we never tried to delete a list node before it is added to list. But this wouldn't be the case anymore. We might try to delete a node (just to reuse the same code paths), without it being getting added to the list. Reviewed-by: Bartlomiej Zolnierkiewicz Signed-off-by: Viresh Kumar Reviewed-by: Stephen Boyd Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 129 +++++++++++++++++++++++---------------- 1 file changed, 78 insertions(+), 51 deletions(-) diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 28d70c9f86ed..0d8dbf21c299 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -484,6 +484,7 @@ static void _kfree_opp_rcu(struct rcu_head *head) * _opp_remove() - Remove an OPP from a table definition * @dev_opp: points back to the device_opp struct this opp belongs to * @opp: pointer to the OPP to remove + * @notify: OPP_EVENT_REMOVE notification should be sent or not * * This function removes an opp definition from the opp list. * @@ -492,13 +493,14 @@ static void _kfree_opp_rcu(struct rcu_head *head) * strategy. */ static void _opp_remove(struct device_opp *dev_opp, - struct dev_pm_opp *opp) + struct dev_pm_opp *opp, bool notify) { /* * Notify the changes in the availability of the operable * frequency/voltage list. */ - srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_REMOVE, opp); + if (notify) + srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_REMOVE, opp); list_del_rcu(&opp->node); call_srcu(&dev_opp->srcu_head.srcu, &opp->rcu_head, _kfree_opp_rcu); @@ -544,12 +546,70 @@ void dev_pm_opp_remove(struct device *dev, unsigned long freq) goto unlock; } - _opp_remove(dev_opp, opp); + _opp_remove(dev_opp, opp, true); unlock: mutex_unlock(&dev_opp_list_lock); } EXPORT_SYMBOL_GPL(dev_pm_opp_remove); +static struct dev_pm_opp *_allocate_opp(struct device *dev, + struct device_opp **dev_opp) +{ + struct dev_pm_opp *opp; + + /* allocate new OPP node */ + opp = kzalloc(sizeof(*opp), GFP_KERNEL); + if (!opp) + return NULL; + + INIT_LIST_HEAD(&opp->node); + + *dev_opp = _add_device_opp(dev); + if (!*dev_opp) { + kfree(opp); + return NULL; + } + + return opp; +} + +static int _opp_add(struct dev_pm_opp *new_opp, struct device_opp *dev_opp) +{ + struct dev_pm_opp *opp; + struct list_head *head = &dev_opp->opp_list; + + /* + * Insert new OPP in order of increasing frequency and discard if + * already present. + * + * Need to use &dev_opp->opp_list in the condition part of the 'for' + * loop, don't replace it with head otherwise it will become an infinite + * loop. + */ + list_for_each_entry_rcu(opp, &dev_opp->opp_list, node) { + if (new_opp->rate > opp->rate) { + head = &opp->node; + continue; + } + + if (new_opp->rate < opp->rate) + break; + + /* Duplicate OPPs */ + dev_warn(dev_opp->dev, "%s: duplicate OPPs detected. Existing: freq: %lu, volt: %lu, enabled: %d. New: freq: %lu, volt: %lu, enabled: %d\n", + __func__, opp->rate, opp->u_volt, opp->available, + new_opp->rate, new_opp->u_volt, new_opp->available); + + return opp->available && new_opp->u_volt == opp->u_volt ? + 0 : -EEXIST; + } + + new_opp->dev_opp = dev_opp; + list_add_rcu(&new_opp->node, head); + + return 0; +} + /** * _opp_add_dynamic() - Allocate a dynamic OPP. * @dev: device for which we do this operation @@ -581,62 +641,28 @@ static int _opp_add_dynamic(struct device *dev, unsigned long freq, long u_volt, bool dynamic) { struct device_opp *dev_opp; - struct dev_pm_opp *opp, *new_opp; - struct list_head *head; + struct dev_pm_opp *new_opp; int ret; - /* allocate new OPP node */ - new_opp = kzalloc(sizeof(*new_opp), GFP_KERNEL); - if (!new_opp) - return -ENOMEM; - /* Hold our list modification lock here */ mutex_lock(&dev_opp_list_lock); + new_opp = _allocate_opp(dev, &dev_opp); + if (!new_opp) { + ret = -ENOMEM; + goto unlock; + } + /* populate the opp table */ new_opp->rate = freq; new_opp->u_volt = u_volt; new_opp->available = true; - - dev_opp = _add_device_opp(dev); - if (!dev_opp) { - ret = -ENOMEM; - goto free_opp; - } - - /* - * Insert new OPP in order of increasing frequency - * and discard if already present - */ - head = &dev_opp->opp_list; - - /* - * Need to use &dev_opp->opp_list in the condition part of the 'for' - * loop, don't replace it with head otherwise it will become an infinite - * loop. - */ - list_for_each_entry_rcu(opp, &dev_opp->opp_list, node) { - if (new_opp->rate > opp->rate) { - head = &opp->node; - continue; - } - - if (new_opp->rate < opp->rate) - break; - - /* Duplicate OPPs */ - ret = opp->available && new_opp->u_volt == opp->u_volt ? - 0 : -EEXIST; - - dev_warn(dev, "%s: duplicate OPPs detected. Existing: freq: %lu, volt: %lu, enabled: %d. New: freq: %lu, volt: %lu, enabled: %d\n", - __func__, opp->rate, opp->u_volt, opp->available, - new_opp->rate, new_opp->u_volt, new_opp->available); - goto free_opp; - } - new_opp->dynamic = dynamic; - new_opp->dev_opp = dev_opp; - list_add_rcu(&new_opp->node, head); + + ret = _opp_add(new_opp, dev_opp); + if (ret) + goto free_opp; + mutex_unlock(&dev_opp_list_lock); /* @@ -647,8 +673,9 @@ static int _opp_add_dynamic(struct device *dev, unsigned long freq, return 0; free_opp: + _opp_remove(dev_opp, new_opp, false); +unlock: mutex_unlock(&dev_opp_list_lock); - kfree(new_opp); return ret; } @@ -876,7 +903,7 @@ void of_free_opp_table(struct device *dev) /* Free static OPPs */ list_for_each_entry_safe(opp, tmp, &dev_opp->opp_list, node) { if (!opp->dynamic) - _opp_remove(dev_opp, opp); + _opp_remove(dev_opp, opp, true); } mutex_unlock(&dev_opp_list_lock); From 274659029c9de5b11678d3a52a45e3dbc9177a48 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 29 Jul 2015 16:23:02 +0530 Subject: [PATCH 07/20] PM / OPP: Add support to parse "operating-points-v2" bindings This adds support in OPP library to parse and create list of OPPs from operating-points-v2 bindings. It takes care of most of the properties of new bindings (except shared-opp, which will be handled separately). For backward compatibility, we keep supporting earlier bindings. We try to search for the new bindings first, in case they aren't present we look for the old deprecated ones. There are few things marked as TODO: - Support for multiple OPP tables - Support for multiple regulators They should be fixed separately. Reviewed-by: Bartlomiej Zolnierkiewicz Signed-off-by: Viresh Kumar Reviewed-by: Stephen Boyd Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 257 +++++++++++++++++++++++++++++++++++---- 1 file changed, 233 insertions(+), 24 deletions(-) diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 0d8dbf21c299..0e0eff4d9299 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -51,10 +51,15 @@ * order. * @dynamic: not-created from static DT entries. * @available: true/false - marks if this OPP as available or not + * @turbo: true if turbo (boost) OPP * @rate: Frequency in hertz - * @u_volt: Nominal voltage in microvolts corresponding to this OPP + * @u_volt: Target voltage in microvolts corresponding to this OPP + * @u_volt_min: Minimum voltage in microvolts corresponding to this OPP + * @u_volt_max: Maximum voltage in microvolts corresponding to this OPP + * @u_amp: Maximum current drawn by the device in microamperes * @dev_opp: points back to the device_opp struct this opp belongs to * @rcu_head: RCU callback head used for deferred freeing + * @np: OPP's device node. * * This structure stores the OPP information for a given device. */ @@ -63,11 +68,18 @@ struct dev_pm_opp { bool available; bool dynamic; + bool turbo; unsigned long rate; + unsigned long u_volt; + unsigned long u_volt_min; + unsigned long u_volt_max; + unsigned long u_amp; struct device_opp *dev_opp; struct rcu_head rcu_head; + + struct device_node *np; }; /** @@ -679,6 +691,125 @@ unlock: return ret; } +/* TODO: Support multiple regulators */ +static int opp_get_microvolt(struct dev_pm_opp *opp, struct device *dev) +{ + u32 microvolt[3] = {0}; + int count, ret; + + count = of_property_count_u32_elems(opp->np, "opp-microvolt"); + if (!count) + return 0; + + /* There can be one or three elements here */ + if (count != 1 && count != 3) { + dev_err(dev, "%s: Invalid number of elements in opp-microvolt property (%d)\n", + __func__, count); + return -EINVAL; + } + + ret = of_property_read_u32_array(opp->np, "opp-microvolt", microvolt, + count); + if (ret) { + dev_err(dev, "%s: error parsing opp-microvolt: %d\n", __func__, + ret); + return -EINVAL; + } + + opp->u_volt = microvolt[0]; + opp->u_volt_min = microvolt[1]; + opp->u_volt_max = microvolt[2]; + + return 0; +} + +/** + * _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings) + * @dev: device for which we do this operation + * @np: device node + * + * This function adds an opp definition to the opp list and returns status. The + * opp can be controlled using dev_pm_opp_enable/disable functions and may be + * removed by dev_pm_opp_remove. + * + * Locking: The internal device_opp and opp structures are RCU protected. + * Hence this function internally uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + * + * Return: + * 0 On success OR + * Duplicate OPPs (both freq and volt are same) and opp->available + * -EEXIST Freq are same and volt are different OR + * Duplicate OPPs (both freq and volt are same) and !opp->available + * -ENOMEM Memory allocation failure + * -EINVAL Failed parsing the OPP node + */ +static int _opp_add_static_v2(struct device *dev, struct device_node *np) +{ + struct device_opp *dev_opp; + struct dev_pm_opp *new_opp; + u64 rate; + int ret; + + /* Hold our list modification lock here */ + mutex_lock(&dev_opp_list_lock); + + new_opp = _allocate_opp(dev, &dev_opp); + if (!new_opp) { + ret = -ENOMEM; + goto unlock; + } + + ret = of_property_read_u64(np, "opp-hz", &rate); + if (ret < 0) { + dev_err(dev, "%s: opp-hz not found\n", __func__); + goto free_opp; + } + + /* + * Rate is defined as an unsigned long in clk API, and so casting + * explicitly to its type. Must be fixed once rate is 64 bit + * guaranteed in clk API. + */ + new_opp->rate = (unsigned long)rate; + new_opp->turbo = of_property_read_bool(np, "turbo-mode"); + + new_opp->np = np; + new_opp->dynamic = false; + new_opp->available = true; + + ret = opp_get_microvolt(new_opp, dev); + if (ret) + goto free_opp; + + of_property_read_u32(np, "opp-microamp", (u32 *)&new_opp->u_amp); + + ret = _opp_add(new_opp, dev_opp); + if (ret) + goto free_opp; + + mutex_unlock(&dev_opp_list_lock); + + pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu\n", + __func__, new_opp->turbo, new_opp->rate, new_opp->u_volt, + new_opp->u_volt_min, new_opp->u_volt_max); + + /* + * Notify the changes in the availability of the operable + * frequency/voltage list. + */ + srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_ADD, new_opp); + return 0; + +free_opp: + _opp_remove(dev_opp, new_opp, false); +unlock: + mutex_unlock(&dev_opp_list_lock); + return ret; +} + /** * dev_pm_opp_add() - Add an OPP table from a table definitions * @dev: device for which we do this operation @@ -910,29 +1041,64 @@ void of_free_opp_table(struct device *dev) } EXPORT_SYMBOL_GPL(of_free_opp_table); -/** - * of_init_opp_table() - Initialize opp table from device tree - * @dev: device pointer used to lookup device OPPs. - * - * Register the initial OPP table with the OPP library for given device. - * - * Locking: The internal device_opp and opp structures are RCU protected. - * Hence this function indirectly uses RCU updater strategy with mutex locks - * to keep the integrity of the internal data structures. Callers should ensure - * that this function is *NOT* called under RCU protection or in contexts where - * mutex cannot be locked. - * - * Return: - * 0 On success OR - * Duplicate OPPs (both freq and volt are same) and opp->available - * -EEXIST Freq are same and volt are different OR - * Duplicate OPPs (both freq and volt are same) and !opp->available - * -ENOMEM Memory allocation failure - * -ENODEV when 'operating-points' property is not found or is invalid data - * in device node. - * -ENODATA when empty 'operating-points' property is found - */ -int of_init_opp_table(struct device *dev) +/* Returns opp descriptor node from its phandle. Caller must do of_node_put() */ +static struct device_node * +_of_get_opp_desc_node_from_prop(struct device *dev, const struct property *prop) +{ + struct device_node *opp_np; + + opp_np = of_find_node_by_phandle(be32_to_cpup(prop->value)); + if (!opp_np) { + dev_err(dev, "%s: Prop: %s contains invalid opp desc phandle\n", + __func__, prop->name); + return ERR_PTR(-EINVAL); + } + + return opp_np; +} + +/* Initializes OPP tables based on new bindings */ +static int _of_init_opp_table_v2(struct device *dev, + const struct property *prop) +{ + struct device_node *opp_np, *np; + int ret = 0, count = 0; + + if (!prop->value) + return -ENODATA; + + /* Get opp node */ + opp_np = _of_get_opp_desc_node_from_prop(dev, prop); + if (IS_ERR(opp_np)) + return PTR_ERR(opp_np); + + /* We have opp-list node now, iterate over it and add OPPs */ + for_each_available_child_of_node(opp_np, np) { + count++; + + ret = _opp_add_static_v2(dev, np); + if (ret) { + dev_err(dev, "%s: Failed to add OPP, %d\n", __func__, + ret); + break; + } + } + + /* There should be one of more OPP defined */ + if (WARN_ON(!count)) + goto put_opp_np; + + if (ret) + of_free_opp_table(dev); + +put_opp_np: + of_node_put(opp_np); + + return ret; +} + +/* Initializes OPP tables based on old-deprecated bindings */ +static int _of_init_opp_table_v1(struct device *dev) { const struct property *prop; const __be32 *val; @@ -967,5 +1133,48 @@ int of_init_opp_table(struct device *dev) return 0; } + +/** + * of_init_opp_table() - Initialize opp table from device tree + * @dev: device pointer used to lookup device OPPs. + * + * Register the initial OPP table with the OPP library for given device. + * + * Locking: The internal device_opp and opp structures are RCU protected. + * Hence this function indirectly uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + * + * Return: + * 0 On success OR + * Duplicate OPPs (both freq and volt are same) and opp->available + * -EEXIST Freq are same and volt are different OR + * Duplicate OPPs (both freq and volt are same) and !opp->available + * -ENOMEM Memory allocation failure + * -ENODEV when 'operating-points' property is not found or is invalid data + * in device node. + * -ENODATA when empty 'operating-points' property is found + * -EINVAL when invalid entries are found in opp-v2 table + */ +int of_init_opp_table(struct device *dev) +{ + const struct property *prop; + + /* + * OPPs have two version of bindings now. The older one is deprecated, + * try for the new binding first. + */ + prop = of_find_property(dev->of_node, "operating-points-v2", NULL); + if (!prop) { + /* + * Try old-deprecated bindings for backward compatibility with + * older dtbs. + */ + return _of_init_opp_table_v1(dev); + } + + return _of_init_opp_table_v2(dev, prop); +} EXPORT_SYMBOL_GPL(of_init_opp_table); #endif From 3ca9bb33c627f22640cfca97fdf88eec0a120dfd Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 29 Jul 2015 16:23:03 +0530 Subject: [PATCH 08/20] PM / OPP: Add clock-latency-ns support With "operating-points-v2" bindings, clock-latency is defined per OPP. Users of this value expect a single value which defines the latency to switch to any clock rate. Find maximum clock-latency-ns from the OPP table to service requests from such users. Reviewed-by: Stephen Boyd Reviewed-by: Bartlomiej Zolnierkiewicz Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 41 ++++++++++++++++++++++++++++++++++++++-- include/linux/pm_opp.h | 6 ++++++ 2 files changed, 45 insertions(+), 2 deletions(-) diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 0e0eff4d9299..8638204c457e 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -57,6 +57,8 @@ * @u_volt_min: Minimum voltage in microvolts corresponding to this OPP * @u_volt_max: Maximum voltage in microvolts corresponding to this OPP * @u_amp: Maximum current drawn by the device in microamperes + * @clock_latency_ns: Latency (in nanoseconds) of switching to this OPP's + * frequency from any other OPP's frequency. * @dev_opp: points back to the device_opp struct this opp belongs to * @rcu_head: RCU callback head used for deferred freeing * @np: OPP's device node. @@ -75,6 +77,7 @@ struct dev_pm_opp { unsigned long u_volt_min; unsigned long u_volt_max; unsigned long u_amp; + unsigned long clock_latency_ns; struct device_opp *dev_opp; struct rcu_head rcu_head; @@ -109,6 +112,8 @@ struct device_opp { struct srcu_notifier_head srcu_head; struct rcu_head rcu_head; struct list_head opp_list; + + unsigned long clock_latency_ns_max; }; /* @@ -225,6 +230,32 @@ unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp) } EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq); +/** + * dev_pm_opp_get_max_clock_latency() - Get max clock latency in nanoseconds + * @dev: device for which we do this operation + * + * Return: This function returns the max clock latency in nanoseconds. + * + * Locking: This function takes rcu_read_lock(). + */ +unsigned long dev_pm_opp_get_max_clock_latency(struct device *dev) +{ + struct device_opp *dev_opp; + unsigned long clock_latency_ns; + + rcu_read_lock(); + + dev_opp = _find_device_opp(dev); + if (IS_ERR(dev_opp)) + clock_latency_ns = 0; + else + clock_latency_ns = dev_opp->clock_latency_ns_max; + + rcu_read_unlock(); + return clock_latency_ns; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_clock_latency); + /** * dev_pm_opp_get_opp_count() - Get number of opps available in the opp list * @dev: device for which we do this operation @@ -779,6 +810,8 @@ static int _opp_add_static_v2(struct device *dev, struct device_node *np) new_opp->np = np; new_opp->dynamic = false; new_opp->available = true; + of_property_read_u32(np, "clock-latency-ns", + (u32 *)&new_opp->clock_latency_ns); ret = opp_get_microvolt(new_opp, dev); if (ret) @@ -790,11 +823,15 @@ static int _opp_add_static_v2(struct device *dev, struct device_node *np) if (ret) goto free_opp; + if (new_opp->clock_latency_ns > dev_opp->clock_latency_ns_max) + dev_opp->clock_latency_ns_max = new_opp->clock_latency_ns; + mutex_unlock(&dev_opp_list_lock); - pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu\n", + pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu latency:%lu\n", __func__, new_opp->turbo, new_opp->rate, new_opp->u_volt, - new_opp->u_volt_min, new_opp->u_volt_max); + new_opp->u_volt_min, new_opp->u_volt_max, + new_opp->clock_latency_ns); /* * Notify the changes in the availability of the operable diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h index cec2d4540914..20324b579adc 100644 --- a/include/linux/pm_opp.h +++ b/include/linux/pm_opp.h @@ -31,6 +31,7 @@ unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp); unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp); int dev_pm_opp_get_opp_count(struct device *dev); +unsigned long dev_pm_opp_get_max_clock_latency(struct device *dev); struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev, unsigned long freq, @@ -67,6 +68,11 @@ static inline int dev_pm_opp_get_opp_count(struct device *dev) return 0; } +static inline unsigned long dev_pm_opp_get_max_clock_latency(struct device *dev) +{ + return 0; +} + static inline struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev, unsigned long freq, bool available) { From 064416586190cb058d4c76a4e26b1996f434b6ca Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 29 Jul 2015 16:23:04 +0530 Subject: [PATCH 09/20] PM / OPP: Add OPP sharing information to OPP library An opp can be shared by multiple devices, for example its very common for CPUs to share the OPPs, i.e. when they share clock/voltage rails. This patch adds support of shared OPPs to the OPP library. Instead of a single device, dev_opp will now contain a list of devices that use it. It also senses if the device (we are trying to initialize OPPs for) shares OPPs with a device added earlier and in that case we update the list of devices managed by OPPs instead of duplicating OPPs again. The same infrastructure will be used for the old OPP bindings, with later patches. Reviewed-by: Stephen Boyd Reviewed-by: Bartlomiej Zolnierkiewicz Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 174 +++++++++++++++++++++++++++++++++------ 1 file changed, 150 insertions(+), 24 deletions(-) diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 8638204c457e..5d699e3ec136 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -85,6 +85,21 @@ struct dev_pm_opp { struct device_node *np; }; +/** + * struct device_list_opp - devices managed by 'struct device_opp' + * @node: list node + * @dev: device to which the struct object belongs + * @rcu_head: RCU callback head used for deferred freeing + * + * This is an internal data structure maintaining the list of devices that are + * managed by 'struct device_opp'. + */ +struct device_list_opp { + struct list_head node; + const struct device *dev; + struct rcu_head rcu_head; +}; + /** * struct device_opp - Device opp structure * @node: list node - contains the devices with OPPs that @@ -92,10 +107,12 @@ struct dev_pm_opp { * list. * RCU usage: nodes are not modified in the list of device_opp, * however addition is possible and is secured by dev_opp_list_lock - * @dev: device pointer * @srcu_head: notifier head to notify the OPP availability changes. * @rcu_head: RCU callback head used for deferred freeing + * @dev_list: list of devices that share these OPPs * @opp_list: list of opps + * @np: struct device_node pointer for opp's DT node. + * @shared_opp: OPP is shared between multiple devices. * * This is an internal data structure maintaining the link to opps attached to * a device. This structure is not meant to be shared to users as it is @@ -108,12 +125,14 @@ struct dev_pm_opp { struct device_opp { struct list_head node; - struct device *dev; struct srcu_notifier_head srcu_head; struct rcu_head rcu_head; + struct list_head dev_list; struct list_head opp_list; + struct device_node *np; unsigned long clock_latency_ns_max; + bool shared_opp; }; /* @@ -133,6 +152,38 @@ do { \ "dev_opp_list_lock protection"); \ } while (0) +static struct device_list_opp *_find_list_dev(const struct device *dev, + struct device_opp *dev_opp) +{ + struct device_list_opp *list_dev; + + list_for_each_entry(list_dev, &dev_opp->dev_list, node) + if (list_dev->dev == dev) + return list_dev; + + return NULL; +} + +static struct device_opp *_managed_opp(const struct device_node *np) +{ + struct device_opp *dev_opp; + + list_for_each_entry_rcu(dev_opp, &dev_opp_list, node) { + if (dev_opp->np == np) { + /* + * Multiple devices can point to the same OPP table and + * so will have same node-pointer, np. + * + * But the OPPs will be considered as shared only if the + * OPP table contains a "opp-shared" property. + */ + return dev_opp->shared_opp ? dev_opp : NULL; + } + } + + return NULL; +} + /** * _find_device_opp() - find device_opp struct using device pointer * @dev: device pointer used to lookup device OPPs @@ -149,21 +200,18 @@ do { \ */ static struct device_opp *_find_device_opp(struct device *dev) { - struct device_opp *tmp_dev_opp, *dev_opp = ERR_PTR(-ENODEV); + struct device_opp *dev_opp; if (unlikely(IS_ERR_OR_NULL(dev))) { pr_err("%s: Invalid parameters\n", __func__); return ERR_PTR(-EINVAL); } - list_for_each_entry_rcu(tmp_dev_opp, &dev_opp_list, node) { - if (tmp_dev_opp->dev == dev) { - dev_opp = tmp_dev_opp; - break; - } - } + list_for_each_entry_rcu(dev_opp, &dev_opp_list, node) + if (_find_list_dev(dev, dev_opp)) + return dev_opp; - return dev_opp; + return ERR_PTR(-ENODEV); } /** @@ -450,6 +498,39 @@ struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev, } EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor); +/* List-dev Helpers */ +static void _kfree_list_dev_rcu(struct rcu_head *head) +{ + struct device_list_opp *list_dev; + + list_dev = container_of(head, struct device_list_opp, rcu_head); + kfree_rcu(list_dev, rcu_head); +} + +static void _remove_list_dev(struct device_list_opp *list_dev, + struct device_opp *dev_opp) +{ + list_del(&list_dev->node); + call_srcu(&dev_opp->srcu_head.srcu, &list_dev->rcu_head, + _kfree_list_dev_rcu); +} + +static struct device_list_opp *_add_list_dev(const struct device *dev, + struct device_opp *dev_opp) +{ + struct device_list_opp *list_dev; + + list_dev = kzalloc(sizeof(*list_dev), GFP_KERNEL); + if (!list_dev) + return NULL; + + /* Initialize list-dev */ + list_dev->dev = dev; + list_add_rcu(&list_dev->node, &dev_opp->dev_list); + + return list_dev; +} + /** * _add_device_opp() - Find device OPP table or allocate a new one * @dev: device for which we do this operation @@ -462,6 +543,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor); static struct device_opp *_add_device_opp(struct device *dev) { struct device_opp *dev_opp; + struct device_list_opp *list_dev; /* Check for existing list for 'dev' first */ dev_opp = _find_device_opp(dev); @@ -476,7 +558,14 @@ static struct device_opp *_add_device_opp(struct device *dev) if (!dev_opp) return NULL; - dev_opp->dev = dev; + INIT_LIST_HEAD(&dev_opp->dev_list); + + list_dev = _add_list_dev(dev, dev_opp); + if (!list_dev) { + kfree(dev_opp); + return NULL; + } + srcu_init_notifier_head(&dev_opp->srcu_head); INIT_LIST_HEAD(&dev_opp->opp_list); @@ -504,9 +593,19 @@ static void _kfree_device_rcu(struct rcu_head *head) */ static void _remove_device_opp(struct device_opp *dev_opp) { + struct device_list_opp *list_dev; + if (!list_empty(&dev_opp->opp_list)) return; + list_dev = list_first_entry(&dev_opp->dev_list, struct device_list_opp, + node); + + _remove_list_dev(list_dev, dev_opp); + + /* dev_list must be empty now */ + WARN_ON(!list_empty(&dev_opp->dev_list)); + list_del_rcu(&dev_opp->node); call_srcu(&dev_opp->srcu_head.srcu, &dev_opp->rcu_head, _kfree_device_rcu); @@ -616,7 +715,8 @@ static struct dev_pm_opp *_allocate_opp(struct device *dev, return opp; } -static int _opp_add(struct dev_pm_opp *new_opp, struct device_opp *dev_opp) +static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, + struct device_opp *dev_opp) { struct dev_pm_opp *opp; struct list_head *head = &dev_opp->opp_list; @@ -639,7 +739,7 @@ static int _opp_add(struct dev_pm_opp *new_opp, struct device_opp *dev_opp) break; /* Duplicate OPPs */ - dev_warn(dev_opp->dev, "%s: duplicate OPPs detected. Existing: freq: %lu, volt: %lu, enabled: %d. New: freq: %lu, volt: %lu, enabled: %d\n", + dev_warn(dev, "%s: duplicate OPPs detected. Existing: freq: %lu, volt: %lu, enabled: %d. New: freq: %lu, volt: %lu, enabled: %d\n", __func__, opp->rate, opp->u_volt, opp->available, new_opp->rate, new_opp->u_volt, new_opp->available); @@ -702,7 +802,7 @@ static int _opp_add_dynamic(struct device *dev, unsigned long freq, new_opp->available = true; new_opp->dynamic = dynamic; - ret = _opp_add(new_opp, dev_opp); + ret = _opp_add(dev, new_opp, dev_opp); if (ret) goto free_opp; @@ -819,7 +919,7 @@ static int _opp_add_static_v2(struct device *dev, struct device_node *np) of_property_read_u32(np, "opp-microamp", (u32 *)&new_opp->u_amp); - ret = _opp_add(new_opp, dev_opp); + ret = _opp_add(dev, new_opp, dev_opp); if (ret) goto free_opp; @@ -1052,6 +1152,9 @@ void of_free_opp_table(struct device *dev) struct device_opp *dev_opp; struct dev_pm_opp *opp, *tmp; + /* Hold our list modification lock here */ + mutex_lock(&dev_opp_list_lock); + /* Check for existing list for 'dev' */ dev_opp = _find_device_opp(dev); if (IS_ERR(dev_opp)) { @@ -1062,18 +1165,21 @@ void of_free_opp_table(struct device *dev) IS_ERR_OR_NULL(dev) ? "Invalid device" : dev_name(dev), error); - return; + goto unlock; } - /* Hold our list modification lock here */ - mutex_lock(&dev_opp_list_lock); - - /* Free static OPPs */ - list_for_each_entry_safe(opp, tmp, &dev_opp->opp_list, node) { - if (!opp->dynamic) - _opp_remove(dev_opp, opp, true); + /* Find if dev_opp manages a single device */ + if (list_is_singular(&dev_opp->dev_list)) { + /* Free static OPPs */ + list_for_each_entry_safe(opp, tmp, &dev_opp->opp_list, node) { + if (!opp->dynamic) + _opp_remove(dev_opp, opp, true); + } + } else { + _remove_list_dev(_find_list_dev(dev, dev_opp), dev_opp); } +unlock: mutex_unlock(&dev_opp_list_lock); } EXPORT_SYMBOL_GPL(of_free_opp_table); @@ -1099,6 +1205,7 @@ static int _of_init_opp_table_v2(struct device *dev, const struct property *prop) { struct device_node *opp_np, *np; + struct device_opp *dev_opp; int ret = 0, count = 0; if (!prop->value) @@ -1109,6 +1216,14 @@ static int _of_init_opp_table_v2(struct device *dev, if (IS_ERR(opp_np)) return PTR_ERR(opp_np); + dev_opp = _managed_opp(opp_np); + if (dev_opp) { + /* OPPs are already managed */ + if (!_add_list_dev(dev, dev_opp)) + ret = -ENOMEM; + goto put_opp_np; + } + /* We have opp-list node now, iterate over it and add OPPs */ for_each_available_child_of_node(opp_np, np) { count++; @@ -1125,8 +1240,19 @@ static int _of_init_opp_table_v2(struct device *dev, if (WARN_ON(!count)) goto put_opp_np; - if (ret) + if (!ret) { + if (!dev_opp) { + dev_opp = _find_device_opp(dev); + if (WARN_ON(!dev_opp)) + goto put_opp_np; + } + + dev_opp->np = opp_np; + dev_opp->shared_opp = of_property_read_bool(opp_np, + "opp-shared"); + } else { of_free_opp_table(dev); + } put_opp_np: of_node_put(opp_np); From ad656a6a8b1c8b4b2e723646e0402867f2f45395 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Sat, 13 Jun 2015 15:10:21 +0530 Subject: [PATCH 10/20] PM / OPP: Add support for opp-suspend With "operating-points-v2" bindings, it's possible to specify the OPP to which the device must be switched, before suspending. This patch adds support for getting that information. Reviewed-by: Stephen Boyd Reviewed-by: Bartlomiej Zolnierkiewicz Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 5d699e3ec136..0ebcea49145a 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -133,6 +133,7 @@ struct device_opp { struct device_node *np; unsigned long clock_latency_ns_max; bool shared_opp; + struct dev_pm_opp *suspend_opp; }; /* @@ -923,6 +924,16 @@ static int _opp_add_static_v2(struct device *dev, struct device_node *np) if (ret) goto free_opp; + /* OPP to select on device suspend */ + if (of_property_read_bool(np, "opp-suspend")) { + if (dev_opp->suspend_opp) + dev_warn(dev, "%s: Multiple suspend OPPs found (%lu %lu)\n", + __func__, dev_opp->suspend_opp->rate, + new_opp->rate); + else + dev_opp->suspend_opp = new_opp; + } + if (new_opp->clock_latency_ns > dev_opp->clock_latency_ns_max) dev_opp->clock_latency_ns_max = new_opp->clock_latency_ns; From 8d4d4e98acd68c31435ebb7beea591dbf60b9eb2 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 12 Jun 2015 17:10:38 +0530 Subject: [PATCH 11/20] PM / OPP: Add helpers for initializing CPU OPPs With "operating-points-v2" its possible to tell which devices share OPPs. We already have infrastructure to decode that information. This patch adds following APIs: - of_get_cpus_sharing_opps: Returns cpumask of CPUs sharing OPPs (only valid with v2 bindings). - of_cpumask_init_opp_table: Initializes OPPs for all CPUs present in cpumask. - of_cpumask_free_opp_table: Frees OPPs for all CPUs present in cpumask. - set_cpus_sharing_opps: Sets which CPUs share OPPs (only valid with old OPP bindings, as this information isn't present in DT). Reviewed-by: Stephen Boyd Reviewed-by: Bartlomiej Zolnierkiewicz Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 175 +++++++++++++++++++++++++++++++++++++++ include/linux/pm_opp.h | 23 +++++ 2 files changed, 198 insertions(+) diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 0ebcea49145a..663aae1c9834 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -11,6 +11,7 @@ * published by the Free Software Foundation. */ +#include #include #include #include @@ -1195,6 +1196,26 @@ unlock: } EXPORT_SYMBOL_GPL(of_free_opp_table); +void of_cpumask_free_opp_table(cpumask_var_t cpumask) +{ + struct device *cpu_dev; + int cpu; + + WARN_ON(cpumask_empty(cpumask)); + + for_each_cpu(cpu, cpumask) { + cpu_dev = get_cpu_device(cpu); + if (!cpu_dev) { + pr_err("%s: failed to get cpu%d device\n", __func__, + cpu); + continue; + } + + of_free_opp_table(cpu_dev); + } +} +EXPORT_SYMBOL_GPL(of_cpumask_free_opp_table); + /* Returns opp descriptor node from its phandle. Caller must do of_node_put() */ static struct device_node * _of_get_opp_desc_node_from_prop(struct device *dev, const struct property *prop) @@ -1211,6 +1232,31 @@ _of_get_opp_desc_node_from_prop(struct device *dev, const struct property *prop) return opp_np; } +/* Returns opp descriptor node for a device. Caller must do of_node_put() */ +static struct device_node *_of_get_opp_desc_node(struct device *dev) +{ + const struct property *prop; + + prop = of_find_property(dev->of_node, "operating-points-v2", NULL); + if (!prop) + return ERR_PTR(-ENODEV); + if (!prop->value) + return ERR_PTR(-ENODATA); + + /* + * TODO: Support for multiple OPP tables. + * + * There should be only ONE phandle present in "operating-points-v2" + * property. + */ + if (prop->length != sizeof(__be32)) { + dev_err(dev, "%s: Invalid opp desc phandle\n", __func__); + return ERR_PTR(-EINVAL); + } + + return _of_get_opp_desc_node_from_prop(dev, prop); +} + /* Initializes OPP tables based on new bindings */ static int _of_init_opp_table_v2(struct device *dev, const struct property *prop) @@ -1351,4 +1397,133 @@ int of_init_opp_table(struct device *dev) return _of_init_opp_table_v2(dev, prop); } EXPORT_SYMBOL_GPL(of_init_opp_table); + +int of_cpumask_init_opp_table(cpumask_var_t cpumask) +{ + struct device *cpu_dev; + int cpu, ret = 0; + + WARN_ON(cpumask_empty(cpumask)); + + for_each_cpu(cpu, cpumask) { + cpu_dev = get_cpu_device(cpu); + if (!cpu_dev) { + pr_err("%s: failed to get cpu%d device\n", __func__, + cpu); + continue; + } + + ret = of_init_opp_table(cpu_dev); + if (ret) { + pr_err("%s: couldn't find opp table for cpu:%d, %d\n", + __func__, cpu, ret); + + /* Free all other OPPs */ + of_cpumask_free_opp_table(cpumask); + break; + } + } + + return ret; +} +EXPORT_SYMBOL_GPL(of_cpumask_init_opp_table); + +/* Required only for V1 bindings, as v2 can manage it from DT itself */ +int set_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask) +{ + struct device_list_opp *list_dev; + struct device_opp *dev_opp; + struct device *dev; + int cpu, ret = 0; + + rcu_read_lock(); + + dev_opp = _find_device_opp(cpu_dev); + if (IS_ERR(dev_opp)) { + ret = -EINVAL; + goto out_rcu_read_unlock; + } + + for_each_cpu(cpu, cpumask) { + if (cpu == cpu_dev->id) + continue; + + dev = get_cpu_device(cpu); + if (!dev) { + dev_err(cpu_dev, "%s: failed to get cpu%d device\n", + __func__, cpu); + continue; + } + + list_dev = _add_list_dev(dev, dev_opp); + if (!list_dev) { + dev_err(dev, "%s: failed to add list-dev for cpu%d device\n", + __func__, cpu); + continue; + } + } +out_rcu_read_unlock: + rcu_read_unlock(); + + return 0; +} +EXPORT_SYMBOL_GPL(set_cpus_sharing_opps); + +/* + * Works only for OPP v2 bindings. + * + * cpumask should be already set to mask of cpu_dev->id. + * Returns -ENOENT if operating-points-v2 bindings aren't supported. + */ +int of_get_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask) +{ + struct device_node *np, *tmp_np; + struct device *tcpu_dev; + int cpu, ret = 0; + + /* Get OPP descriptor node */ + np = _of_get_opp_desc_node(cpu_dev); + if (IS_ERR(np)) { + dev_dbg(cpu_dev, "%s: Couldn't find opp node: %ld\n", __func__, + PTR_ERR(np)); + return -ENOENT; + } + + /* OPPs are shared ? */ + if (!of_property_read_bool(np, "opp-shared")) + goto put_cpu_node; + + for_each_possible_cpu(cpu) { + if (cpu == cpu_dev->id) + continue; + + tcpu_dev = get_cpu_device(cpu); + if (!tcpu_dev) { + dev_err(cpu_dev, "%s: failed to get cpu%d device\n", + __func__, cpu); + ret = -ENODEV; + goto put_cpu_node; + } + + /* Get OPP descriptor node */ + tmp_np = _of_get_opp_desc_node(tcpu_dev); + if (IS_ERR(tmp_np)) { + dev_err(tcpu_dev, "%s: Couldn't find opp node: %ld\n", + __func__, PTR_ERR(tmp_np)); + ret = PTR_ERR(tmp_np); + goto put_cpu_node; + } + + /* CPUs are sharing opp node */ + if (np == tmp_np) + cpumask_set_cpu(cpu, cpumask); + + of_node_put(tmp_np); + } + +put_cpu_node: + of_node_put(np); + return ret; +} +EXPORT_SYMBOL_GPL(of_get_cpus_sharing_opps); #endif diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h index 20324b579adc..bb52fae5b921 100644 --- a/include/linux/pm_opp.h +++ b/include/linux/pm_opp.h @@ -121,6 +121,10 @@ static inline struct srcu_notifier_head *dev_pm_opp_get_notifier( #if defined(CONFIG_PM_OPP) && defined(CONFIG_OF) int of_init_opp_table(struct device *dev); void of_free_opp_table(struct device *dev); +int of_cpumask_init_opp_table(cpumask_var_t cpumask); +void of_cpumask_free_opp_table(cpumask_var_t cpumask); +int of_get_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask); +int set_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask); #else static inline int of_init_opp_table(struct device *dev) { @@ -130,6 +134,25 @@ static inline int of_init_opp_table(struct device *dev) static inline void of_free_opp_table(struct device *dev) { } + +static inline int of_cpumask_init_opp_table(cpumask_var_t cpumask) +{ + return -ENOSYS; +} + +static inline void of_cpumask_free_opp_table(cpumask_var_t cpumask) +{ +} + +static inline int of_get_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask) +{ + return -ENOSYS; +} + +static inline int set_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask) +{ + return -ENOSYS; +} #endif #endif /* __LINUX_OPP_H__ */ From 19445b25e350ebebaa304bb2135619f643302947 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 9 Jul 2015 17:43:35 +0200 Subject: [PATCH 12/20] PM / OPP: add dev_pm_opp_is_turbo() helper Add dev_pm_opp_is_turbo() helper to verify if an opp is to be used only for turbo mode or not. Reviewed-by: Stephen Boyd Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 34 ++++++++++++++++++++++++++++++++++ include/linux/pm_opp.h | 7 +++++++ 2 files changed, 41 insertions(+) diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 663aae1c9834..204c6c945168 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -280,6 +280,40 @@ unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp) } EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq); +/** + * dev_pm_opp_is_turbo() - Returns if opp is turbo OPP or not + * @opp: opp for which turbo mode is being verified + * + * Turbo OPPs are not for normal use, and can be enabled (under certain + * conditions) for short duration of times to finish high throughput work + * quickly. Running on them for longer times may overheat the chip. + * + * Return: true if opp is turbo opp, else false. + * + * Locking: This function must be called under rcu_read_lock(). opp is a rcu + * protected pointer. This means that opp which could have been fetched by + * opp_find_freq_{exact,ceil,floor} functions is valid as long as we are + * under RCU lock. The pointer returned by the opp_find_freq family must be + * used in the same section as the usage of this function with the pointer + * prior to unlocking with rcu_read_unlock() to maintain the integrity of the + * pointer. + */ +bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp) +{ + struct dev_pm_opp *tmp_opp; + + opp_rcu_lockdep_assert(); + + tmp_opp = rcu_dereference(opp); + if (IS_ERR_OR_NULL(tmp_opp) || !tmp_opp->available) { + pr_err("%s: Invalid parameters\n", __func__); + return false; + } + + return tmp_opp->turbo; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_is_turbo); + /** * dev_pm_opp_get_max_clock_latency() - Get max clock latency in nanoseconds * @dev: device for which we do this operation diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h index bb52fae5b921..cab7ba55bedb 100644 --- a/include/linux/pm_opp.h +++ b/include/linux/pm_opp.h @@ -30,6 +30,8 @@ unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp); unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp); +bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp); + int dev_pm_opp_get_opp_count(struct device *dev); unsigned long dev_pm_opp_get_max_clock_latency(struct device *dev); @@ -63,6 +65,11 @@ static inline unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp) return 0; } +static inline bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp) +{ + return false; +} + static inline int dev_pm_opp_get_opp_count(struct device *dev) { return 0; From 79eea44a5d7b9170d12d75c701d8c0e2d8d83c06 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 29 Jul 2015 16:23:08 +0530 Subject: [PATCH 13/20] cpufreq: Update boost flag while initializing freq table from OPPs cpufreq table entries for OPPs with turbo modes enabled, should be marked with CPUFREQ_BOOST_FREQ flag. This ensures that these states are only used while operating in boost or turbo mode. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Viresh Kumar Reviewed-by: Stephen Boyd Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq_opp.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/cpufreq/cpufreq_opp.c b/drivers/cpufreq/cpufreq_opp.c index 773bcde893c0..0f5e6d5f6da0 100644 --- a/drivers/cpufreq/cpufreq_opp.c +++ b/drivers/cpufreq/cpufreq_opp.c @@ -75,6 +75,10 @@ int dev_pm_opp_init_cpufreq_table(struct device *dev, } freq_table[i].driver_data = i; freq_table[i].frequency = rate / 1000; + + /* Is Boost/turbo opp ? */ + if (dev_pm_opp_is_turbo(opp)) + freq_table[i].flags = CPUFREQ_BOOST_FREQ; } freq_table[i].driver_data = i; From 44139ed4943ee8ec186eea3e9072ca16d2b48133 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 29 Jul 2015 16:23:09 +0530 Subject: [PATCH 14/20] cpufreq: Allow drivers to enable boost support after registering driver In some cases it wouldn't be known at time of driver registration, if the driver needs to support boost frequencies. For example, while getting boost information from DT with opp-v2 bindings, we need to parse the bindings for all the CPUs to know if turbo/boost OPPs are supported or not. One way out to do that efficiently is to delay supporting boost mode (i.e. creating /sys/devices/system/cpu/cpufreq/boost file), until the time OPP bindings are parsed. At that point, the driver can enable boost support. This can be done at ->init(), where the frequency table is created. To do that, the driver requires few APIs from cpufreq core that let him do this. This patch provides these APIs. Signed-off-by: Viresh Kumar Reviewed-by: Stephen Boyd Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq.c | 68 +++++++++++++++++++++++++----------- drivers/cpufreq/freq_table.c | 15 ++++++++ include/linux/cpufreq.h | 12 +++++++ 3 files changed, 75 insertions(+), 20 deletions(-) diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 76a26609d96b..e48242119d77 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -2437,6 +2437,49 @@ int cpufreq_boost_supported(void) } EXPORT_SYMBOL_GPL(cpufreq_boost_supported); +static int create_boost_sysfs_file(void) +{ + int ret; + + if (!cpufreq_boost_supported()) + return 0; + + /* + * Check if driver provides function to enable boost - + * if not, use cpufreq_boost_set_sw as default + */ + if (!cpufreq_driver->set_boost) + cpufreq_driver->set_boost = cpufreq_boost_set_sw; + + ret = cpufreq_sysfs_create_file(&boost.attr); + if (ret) + pr_err("%s: cannot register global BOOST sysfs file\n", + __func__); + + return ret; +} + +static void remove_boost_sysfs_file(void) +{ + if (cpufreq_boost_supported()) + cpufreq_sysfs_remove_file(&boost.attr); +} + +int cpufreq_enable_boost_support(void) +{ + if (!cpufreq_driver) + return -EINVAL; + + if (cpufreq_boost_supported()) + return 0; + + cpufreq_driver->boost_supported = true; + + /* This will get removed on driver unregister */ + return create_boost_sysfs_file(); +} +EXPORT_SYMBOL_GPL(cpufreq_enable_boost_support); + int cpufreq_boost_enabled(void) { return cpufreq_driver->boost_enabled; @@ -2490,21 +2533,9 @@ int cpufreq_register_driver(struct cpufreq_driver *driver_data) if (driver_data->setpolicy) driver_data->flags |= CPUFREQ_CONST_LOOPS; - if (cpufreq_boost_supported()) { - /* - * Check if driver provides function to enable boost - - * if not, use cpufreq_boost_set_sw as default - */ - if (!cpufreq_driver->set_boost) - cpufreq_driver->set_boost = cpufreq_boost_set_sw; - - ret = cpufreq_sysfs_create_file(&boost.attr); - if (ret) { - pr_err("%s: cannot register global BOOST sysfs file\n", - __func__); - goto err_null_driver; - } - } + ret = create_boost_sysfs_file(); + if (ret) + goto err_null_driver; ret = subsys_interface_register(&cpufreq_interface); if (ret) @@ -2528,8 +2559,7 @@ out: err_if_unreg: subsys_interface_unregister(&cpufreq_interface); err_boost_unreg: - if (cpufreq_boost_supported()) - cpufreq_sysfs_remove_file(&boost.attr); + remove_boost_sysfs_file(); err_null_driver: write_lock_irqsave(&cpufreq_driver_lock, flags); cpufreq_driver = NULL; @@ -2558,9 +2588,7 @@ int cpufreq_unregister_driver(struct cpufreq_driver *driver) /* Protect against concurrent cpu hotplug */ get_online_cpus(); subsys_interface_unregister(&cpufreq_interface); - if (cpufreq_boost_supported()) - cpufreq_sysfs_remove_file(&boost.attr); - + remove_boost_sysfs_file(); unregister_hotcpu_notifier(&cpufreq_cpu_notifier); write_lock_irqsave(&cpufreq_driver_lock, flags); diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c index dfbbf981ed56..a8f1daffc9bc 100644 --- a/drivers/cpufreq/freq_table.c +++ b/drivers/cpufreq/freq_table.c @@ -18,6 +18,21 @@ * FREQUENCY TABLE HELPERS * *********************************************************************/ +bool policy_has_boost_freq(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *pos, *table = policy->freq_table; + + if (!table) + return false; + + cpufreq_for_each_valid_entry(pos, table) + if (pos->flags & CPUFREQ_BOOST_FREQ) + return true; + + return false; +} +EXPORT_SYMBOL_GPL(policy_has_boost_freq); + int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy, struct cpufreq_frequency_table *table) { diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index bde1e567b3a9..95f018649abf 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -578,6 +578,8 @@ ssize_t cpufreq_show_cpus(const struct cpumask *mask, char *buf); int cpufreq_boost_trigger_state(int state); int cpufreq_boost_supported(void); int cpufreq_boost_enabled(void); +int cpufreq_enable_boost_support(void); +bool policy_has_boost_freq(struct cpufreq_policy *policy); #else static inline int cpufreq_boost_trigger_state(int state) { @@ -591,6 +593,16 @@ static inline int cpufreq_boost_enabled(void) { return 0; } + +static inline int cpufreq_enable_boost_support(void) +{ + return -EINVAL; +} + +static inline bool policy_has_boost_freq(struct cpufreq_policy *policy) +{ + return false; +} #endif /* the following funtion is for cpufreq core use only */ struct cpufreq_frequency_table *cpufreq_frequency_get_table(unsigned int cpu); From 2e02d8723edf6599988852a8ade8f83b2f766cb8 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 29 Jul 2015 16:23:10 +0530 Subject: [PATCH 15/20] cpufreq: dt: Add support for operating-points-v2 bindings Support for parsing operating-points-v2 bindings is in place now, lets modify cpufreq-dt driver to use them. For backward compatibility we will continue to support earlier bindings. Special handling for that is required, to make sure OPPs are initialized for all the CPUs. Reviewed-by: Bartlomiej Zolnierkiewicz Signed-off-by: Viresh Kumar Reviewed-by: Stephen Boyd Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq-dt.c | 56 +++++++++++++++++++++++++++++------- 1 file changed, 46 insertions(+), 10 deletions(-) diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c index 528a82bf5038..c6e7033076de 100644 --- a/drivers/cpufreq/cpufreq-dt.c +++ b/drivers/cpufreq/cpufreq-dt.c @@ -184,7 +184,6 @@ try_again: static int cpufreq_init(struct cpufreq_policy *policy) { - struct cpufreq_dt_platform_data *pd; struct cpufreq_frequency_table *freq_table; struct device_node *np; struct private_data *priv; @@ -193,6 +192,7 @@ static int cpufreq_init(struct cpufreq_policy *policy) struct clk *cpu_clk; unsigned long min_uV = ~0, max_uV = 0; unsigned int transition_latency; + bool need_update = false; int ret; ret = allocate_resources(policy->cpu, &cpu_dev, &cpu_reg, &cpu_clk); @@ -208,8 +208,47 @@ static int cpufreq_init(struct cpufreq_policy *policy) goto out_put_reg_clk; } - /* OPPs might be populated at runtime, don't check for error here */ - of_init_opp_table(cpu_dev); + /* Get OPP-sharing information from "operating-points-v2" bindings */ + ret = of_get_cpus_sharing_opps(cpu_dev, policy->cpus); + if (ret) { + /* + * operating-points-v2 not supported, fallback to old method of + * finding shared-OPPs for backward compatibility. + */ + if (ret == -ENOENT) + need_update = true; + else + goto out_node_put; + } + + /* + * Initialize OPP tables for all policy->cpus. They will be shared by + * all CPUs which have marked their CPUs shared with OPP bindings. + * + * For platforms not using operating-points-v2 bindings, we do this + * before updating policy->cpus. Otherwise, we will end up creating + * duplicate OPPs for policy->cpus. + * + * OPPs might be populated at runtime, don't check for error here + */ + of_cpumask_init_opp_table(policy->cpus); + + if (need_update) { + struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data(); + + if (!pd || !pd->independent_clocks) + cpumask_setall(policy->cpus); + + /* + * OPP tables are initialized only for policy->cpu, do it for + * others as well. + */ + set_cpus_sharing_opps(cpu_dev, policy->cpus); + + of_property_read_u32(np, "clock-latency", &transition_latency); + } else { + transition_latency = dev_pm_opp_get_max_clock_latency(cpu_dev); + } /* * But we need OPP table to function so if it is not there let's @@ -230,7 +269,7 @@ static int cpufreq_init(struct cpufreq_policy *policy) of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance); - if (of_property_read_u32(np, "clock-latency", &transition_latency)) + if (!transition_latency) transition_latency = CPUFREQ_ETERNAL; if (!IS_ERR(cpu_reg)) { @@ -293,10 +332,6 @@ static int cpufreq_init(struct cpufreq_policy *policy) policy->cpuinfo.transition_latency = transition_latency; - pd = cpufreq_get_driver_data(); - if (!pd || !pd->independent_clocks) - cpumask_setall(policy->cpus); - of_node_put(np); return 0; @@ -306,7 +341,8 @@ out_free_cpufreq_table: out_free_priv: kfree(priv); out_free_opp: - of_free_opp_table(cpu_dev); + of_cpumask_free_opp_table(policy->cpus); +out_node_put: of_node_put(np); out_put_reg_clk: clk_put(cpu_clk); @@ -322,7 +358,7 @@ static int cpufreq_exit(struct cpufreq_policy *policy) cpufreq_cooling_unregister(priv->cdev); dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table); - of_free_opp_table(priv->cpu_dev); + of_cpumask_free_opp_table(policy->related_cpus); clk_put(policy->clk); if (!IS_ERR(priv->cpu_reg)) regulator_put(priv->cpu_reg); From d15fa86276e8515443251c0d18930e392bc5afc5 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 29 Jul 2015 16:23:11 +0530 Subject: [PATCH 16/20] cpufreq: dt: Add support for turbo/boost mode With opp-v2 DT bindings, few OPPs can be used only for the boost mode. But using such OPPs require the boost mode to be supported by cpufreq driver. We will parse DT bindings only during ->init() and so can enable boost support only after registering cpufreq driver. This enables boost support as soon as any policy has boost/turbo OPPs for its CPUs. We don't need to disable boost support as that is done by the core, when the driver is unregistered. Signed-off-by: Viresh Kumar Reviewed-by: Stephen Boyd Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq-dt.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c index c6e7033076de..b9259abd25d4 100644 --- a/drivers/cpufreq/cpufreq-dt.c +++ b/drivers/cpufreq/cpufreq-dt.c @@ -330,6 +330,14 @@ static int cpufreq_init(struct cpufreq_policy *policy) goto out_free_cpufreq_table; } + /* Support turbo/boost mode */ + if (policy_has_boost_freq(policy)) { + /* This gets disabled by core on driver unregister */ + ret = cpufreq_enable_boost_support(); + if (ret) + goto out_free_cpufreq_table; + } + policy->cpuinfo.transition_latency = transition_latency; of_node_put(np); From 21c36d35711d24a7689b7fb9606ce78f3b4c3d3b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 7 Aug 2015 13:59:16 +0200 Subject: [PATCH 17/20] cpufreq-dt: make scaling_boost_freqs sysfs attr available when boost is enabled Make scaling_boost_freqs sysfs attribute is available when cpufreq-dt driver is used and boost support is enabled. Suggested-by: Viresh Kumar Acked-by: Viresh Kumar Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq-dt.c | 9 ++++++++- include/linux/cpufreq.h | 1 + 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c index b9259abd25d4..c3583cdfadbd 100644 --- a/drivers/cpufreq/cpufreq-dt.c +++ b/drivers/cpufreq/cpufreq-dt.c @@ -36,6 +36,12 @@ struct private_data { unsigned int voltage_tolerance; /* in percentage */ }; +static struct freq_attr *cpufreq_dt_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, /* Extra space for boost-attr if required */ + NULL, +}; + static int set_target(struct cpufreq_policy *policy, unsigned int index) { struct dev_pm_opp *opp; @@ -336,6 +342,7 @@ static int cpufreq_init(struct cpufreq_policy *policy) ret = cpufreq_enable_boost_support(); if (ret) goto out_free_cpufreq_table; + cpufreq_dt_attr[1] = &cpufreq_freq_attr_scaling_boost_freqs; } policy->cpuinfo.transition_latency = transition_latency; @@ -411,7 +418,7 @@ static struct cpufreq_driver dt_cpufreq_driver = { .exit = cpufreq_exit, .ready = cpufreq_ready, .name = "cpufreq-dt", - .attr = cpufreq_generic_attr, + .attr = cpufreq_dt_attr, }; static int dt_cpufreq_probe(struct platform_device *pdev) diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 95f018649abf..657542d3e23b 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -609,6 +609,7 @@ struct cpufreq_frequency_table *cpufreq_frequency_get_table(unsigned int cpu); /* the following are really really optional */ extern struct freq_attr cpufreq_freq_attr_scaling_available_freqs; +extern struct freq_attr cpufreq_freq_attr_scaling_boost_freqs; extern struct freq_attr *cpufreq_generic_attr[]; int cpufreq_table_validate_and_show(struct cpufreq_policy *policy, struct cpufreq_frequency_table *table); From 1f821ed7afaa7ed689322ee2369f270e374a6350 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 12 Aug 2015 16:30:18 +0530 Subject: [PATCH 18/20] PM / OPP: Free resources and properly return error on failure _of_init_opp_table_v2() isn't freeing up resources on some errors and the error values returned are also not correct always. This fixes following problems: - Return -ENOENT, if no entries are found in the table. - Use IS_ERR() to properly check return value of _find_device_opp(). - Return error value with PTR_ERR() in above case. - Free table if _find_device_opp() fails. Reported-by: Dan Carpenter Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-) diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 204c6c945168..4d6c4576f7ae 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -1323,28 +1323,30 @@ static int _of_init_opp_table_v2(struct device *dev, if (ret) { dev_err(dev, "%s: Failed to add OPP, %d\n", __func__, ret); - break; + goto free_table; } } /* There should be one of more OPP defined */ - if (WARN_ON(!count)) + if (WARN_ON(!count)) { + ret = -ENOENT; goto put_opp_np; - - if (!ret) { - if (!dev_opp) { - dev_opp = _find_device_opp(dev); - if (WARN_ON(!dev_opp)) - goto put_opp_np; - } - - dev_opp->np = opp_np; - dev_opp->shared_opp = of_property_read_bool(opp_np, - "opp-shared"); - } else { - of_free_opp_table(dev); } + dev_opp = _find_device_opp(dev); + if (WARN_ON(IS_ERR(dev_opp))) { + ret = PTR_ERR(dev_opp); + goto free_table; + } + + dev_opp->np = opp_np; + dev_opp->shared_opp = of_property_read_bool(opp_np, "opp-shared"); + + of_node_put(opp_np); + return 0; + +free_table: + of_free_opp_table(dev); put_opp_np: of_node_put(opp_np); From 68fa9f0ab1b61cfc7deee699da8b5b5cb12f7a58 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 17 Aug 2015 19:20:20 +0530 Subject: [PATCH 19/20] PM / OPP: Fix static checker warning (broken 64bit big endian systems) Dan Carpenter reported (generated with static checker): drivers/base/power/opp.c:949 _opp_add_static_v2() warn: passing casted pointer '&new_opp->clock_latency_ns' to 'of_property_read_u32()' 64 vs 32. This code will break on 64 bit, big endian machines. Fix this by reading the value in a u32 type variable first and then assigning it to the unsigned long variable. Reported-by: Dan Carpenter Suggested-by: Stephen Boyd Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 4d6c4576f7ae..803d8b7ced89 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -918,6 +918,7 @@ static int _opp_add_static_v2(struct device *dev, struct device_node *np) struct device_opp *dev_opp; struct dev_pm_opp *new_opp; u64 rate; + u32 val; int ret; /* Hold our list modification lock here */ @@ -946,14 +947,16 @@ static int _opp_add_static_v2(struct device *dev, struct device_node *np) new_opp->np = np; new_opp->dynamic = false; new_opp->available = true; - of_property_read_u32(np, "clock-latency-ns", - (u32 *)&new_opp->clock_latency_ns); + + if (!of_property_read_u32(np, "clock-latency-ns", &val)) + new_opp->clock_latency_ns = val; ret = opp_get_microvolt(new_opp, dev); if (ret) goto free_opp; - of_property_read_u32(np, "opp-microamp", (u32 *)&new_opp->u_amp); + if (!of_property_read_u32(new_opp->np, "opp-microamp", &val)) + new_opp->u_amp = val; ret = _opp_add(dev, new_opp, dev_opp); if (ret) From 50a3cb04a5f9cd5323a76db9ee409a7f3004259a Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 12 Aug 2015 15:59:39 +0530 Subject: [PATCH 20/20] PM / OPP: Drop unlikely before IS_ERR(_OR_NULL) IS_ERR(_OR_NULL) already contain an 'unlikely' compiler flag and there is no need to do that again from its callers. Drop it. Acked-by: Pavel Machek Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 803d8b7ced89..bb703b5ebaff 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -204,7 +204,7 @@ static struct device_opp *_find_device_opp(struct device *dev) { struct device_opp *dev_opp; - if (unlikely(IS_ERR_OR_NULL(dev))) { + if (IS_ERR_OR_NULL(dev)) { pr_err("%s: Invalid parameters\n", __func__); return ERR_PTR(-EINVAL); } @@ -239,7 +239,7 @@ unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp) opp_rcu_lockdep_assert(); tmp_opp = rcu_dereference(opp); - if (unlikely(IS_ERR_OR_NULL(tmp_opp)) || !tmp_opp->available) + if (IS_ERR_OR_NULL(tmp_opp) || !tmp_opp->available) pr_err("%s: Invalid parameters\n", __func__); else v = tmp_opp->u_volt; @@ -271,7 +271,7 @@ unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp) opp_rcu_lockdep_assert(); tmp_opp = rcu_dereference(opp); - if (unlikely(IS_ERR_OR_NULL(tmp_opp)) || !tmp_opp->available) + if (IS_ERR_OR_NULL(tmp_opp) || !tmp_opp->available) pr_err("%s: Invalid parameters\n", __func__); else f = tmp_opp->rate;