diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro
index 25680346e0ac..775f489e86f6 100644
--- a/Documentation/i2c/busses/i2c-viapro
+++ b/Documentation/i2c/busses/i2c-viapro
@@ -13,6 +13,9 @@ Supported adapters:
   * VIA Technologies, Inc. VT8235, VT8237R, VT8237A, VT8251
     Datasheet: available on request and under NDA from VIA
 
+  * VIA Technologies, Inc. CX700
+    Datasheet: available on request and under NDA from VIA
+
 Authors:
 	Kyösti Mälkki <kmalkki@cc.hut.fi>,
 	Mark D. Studebaker <mdsxyz123@yahoo.com>,
@@ -44,6 +47,7 @@ Your lspci -n listing must show one of these :
  device 1106:3227   (VT8237R)
  device 1106:3337   (VT8237A)
  device 1106:3287   (VT8251)
+ device 1106:8324   (CX700)
 
 If none of these show up, you should look in the BIOS for settings like
 enable ACPI / SMBus or even USB.
@@ -51,3 +55,6 @@ enable ACPI / SMBus or even USB.
 Except for the oldest chips (VT82C596A/B, VT82C686A and most probably
 VT8231), this driver supports I2C block transactions. Such transactions
 are mainly useful to read from and write to EEPROMs.
+
+The CX700 additionally appears to support SMBus PEC, although this driver
+doesn't implement it yet.
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index f2894dec51a5..25d52e0eec2c 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -500,11 +500,11 @@ config I2C_VIA
 	  will be called i2c-via.
 
 config I2C_VIAPRO
-	tristate "VIA 82C596/82C686/82xx"
+	tristate "VIA VT82C596/82C686/82xx and CX700"
 	depends on I2C && PCI
 	help
 	  If you say yes to this option, support will be included for the VIA
-	  82C596/82C686/82xx I2C interfaces.  Specifically, the following
+	  VT82C596 and later SMBus interface.  Specifically, the following
 	  chipsets are supported:
 	    VT82C596A/B
 	    VT82C686A/B
@@ -513,6 +513,7 @@ config I2C_VIAPRO
 	    VT8235
 	    VT8237R/A
 	    VT8251
+	    CX700
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-viapro.
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 43a081f16553..03c5fc868548 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -4,7 +4,7 @@
     Copyright (c) 1998 - 2002  Frodo Looijaard <frodol@dds.nl>,
     Philip Edelbrock <phil@netroedge.com>, Kyösti Mälkki <kmalkki@cc.hut.fi>,
     Mark D. Studebaker <mdsxyz123@yahoo.com>
-    Copyright (C) 2005  Jean Delvare <khali@linux-fr.org>
+    Copyright (C) 2005 - 2007  Jean Delvare <khali@linux-fr.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -36,6 +36,7 @@
    VT8237R            0x3227             yes
    VT8237A            0x3337             yes
    VT8251             0x3287             yes
+   CX700              0x8324             yes
 
    Note: we assume there can only be one device, with one SMBus interface.
 */
@@ -384,6 +385,7 @@ found:
 	dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba);
 
 	switch (pdev->device) {
+	case PCI_DEVICE_ID_VIA_CX700:
 	case PCI_DEVICE_ID_VIA_8251:
 	case PCI_DEVICE_ID_VIA_8237:
 	case PCI_DEVICE_ID_VIA_8237A:
@@ -443,6 +445,8 @@ static struct pci_device_id vt596_ids[] = {
 	  .driver_data = SMBBA1 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8251),
 	  .driver_data = SMBBA3 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700),
+	  .driver_data = SMBBA3 },
 	{ 0, }
 };