bus: mhi: pci_generic: Introduce Foxconn T99W175 support

Add support for T99W175 modems, this modem series is based on SDX55
qcom chip. The modem is mainly based on MBIM protocol for both the
data and control path.

This patch adds support for below modems:

 - T99W175(based on sdx55), Both for eSIM and Non-eSIM
 - DW5930e(based on sdx55), With eSIM, It's also T99W175
 - DW5930e(based on sdx55), Non-eSIM, It's also T99W175

This patch was tested with Ubuntu 20.04 X86_64 PC as host

Signed-off-by: Jarvis Jiang <jarvis.w.jiang@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408095524.3559-1-jarvis.w.jiang@gmail.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
This commit is contained in:
Jarvis Jiang 2021-04-08 02:55:24 -07:00 committed by Manivannan Sadhasivam
parent ec32332df7
commit aac426562f
1 changed files with 47 additions and 0 deletions

View File

@ -304,6 +304,44 @@ static const struct mhi_pci_dev_info mhi_quectel_em1xx_info = {
.dma_data_width = 32 .dma_data_width = 32
}; };
static const struct mhi_channel_config mhi_foxconn_sdx55_channels[] = {
MHI_CHANNEL_CONFIG_UL(0, "LOOPBACK", 32, 0),
MHI_CHANNEL_CONFIG_DL(1, "LOOPBACK", 32, 0),
MHI_CHANNEL_CONFIG_UL(4, "DIAG", 32, 1),
MHI_CHANNEL_CONFIG_DL(5, "DIAG", 32, 1),
MHI_CHANNEL_CONFIG_UL(12, "MBIM", 32, 0),
MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0),
MHI_CHANNEL_CONFIG_UL(32, "AT", 32, 0),
MHI_CHANNEL_CONFIG_DL(33, "AT", 32, 0),
MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2),
MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3),
};
static struct mhi_event_config mhi_foxconn_sdx55_events[] = {
MHI_EVENT_CONFIG_CTRL(0, 128),
MHI_EVENT_CONFIG_DATA(1, 128),
MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100),
MHI_EVENT_CONFIG_HW_DATA(3, 1024, 101)
};
static struct mhi_controller_config modem_foxconn_sdx55_config = {
.max_channels = 128,
.timeout_ms = 20000,
.num_channels = ARRAY_SIZE(mhi_foxconn_sdx55_channels),
.ch_cfg = mhi_foxconn_sdx55_channels,
.num_events = ARRAY_SIZE(mhi_foxconn_sdx55_events),
.event_cfg = mhi_foxconn_sdx55_events,
};
static const struct mhi_pci_dev_info mhi_foxconn_sdx55_info = {
.name = "foxconn-sdx55",
.fw = "qcom/sdx55m/sbl1.mbn",
.edl = "qcom/sdx55m/edl.mbn",
.config = &modem_foxconn_sdx55_config,
.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
.dma_data_width = 32
};
static const struct pci_device_id mhi_pci_id_table[] = { static const struct pci_device_id mhi_pci_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0306), { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0306),
.driver_data = (kernel_ulong_t) &mhi_qcom_sdx55_info }, .driver_data = (kernel_ulong_t) &mhi_qcom_sdx55_info },
@ -315,6 +353,15 @@ static const struct pci_device_id mhi_pci_id_table[] = {
.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info }, .driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0308), { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0308),
.driver_data = (kernel_ulong_t) &mhi_qcom_sdx65_info }, .driver_data = (kernel_ulong_t) &mhi_qcom_sdx65_info },
/* T99W175 (sdx55), Both for eSIM and Non-eSIM */
{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0ab),
.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
/* DW5930e (sdx55), With eSIM, It's also T99W175 */
{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0b0),
.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
/* DW5930e (sdx55), Non-eSIM, It's also T99W175 */
{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0b1),
.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
{ } { }
}; };
MODULE_DEVICE_TABLE(pci, mhi_pci_id_table); MODULE_DEVICE_TABLE(pci, mhi_pci_id_table);