UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

usb: musb: remove blackfin port 

The blackfin architecture is getting removed, so we can clean up
all the special cases in the musb driver.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Aaron Wu <aaron.wu@analog.com>
Acked-by: Bin Liu <b-liu@ti.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
[arnd: adding in fixups from Aaron and Stephen]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2018-03-09 17:37:54 +01:00
parent 03f4c9abd7
commit a9762b704f
15 changed files with 13 additions and 1096 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
Documentation/driver-api/usb/writing_musb_glue_layer.rst
View File

@ -718,6 +718,3 @@ http://www.maximintegrated.com/app-notes/index.mvp/id/1822
Texas Instruments USB Configuration Wiki Page:
http://processors.wiki.ti.com/index.php/Usbgeneralpage
Analog Devices Blackfin MUSB Configuration:
http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:musb

12
drivers/usb/musb/Kconfig
View File

@ -5,7 +5,7 @@
# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
config USB_MUSB_HDRC
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, AW, ...)'
tristate 'Inventra Highspeed Dual Role Controller'
depends on (USB || USB_GADGET)
depends on HAS_IOMEM
help
@ -18,9 +18,6 @@ config USB_MUSB_HDRC
Texas Instruments families using this IP include DaVinci
(35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
Analog Devices parts using this IP include Blackfin BF54x,
BF525 and BF527.
Allwinner SoCs using this IP include A10, A13, A20, ...
If you do not know what this is, please say N.
@ -107,11 +104,6 @@ config USB_MUSB_DSPS
depends on ARCH_OMAP2PLUS || COMPILE_TEST
depends on OF_IRQ
config USB_MUSB_BLACKFIN
tristate "Blackfin"
depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
depends on NOP_USB_XCEIV
config USB_MUSB_UX500
tristate "Ux500 platforms"
depends on ARCH_U8500 || COMPILE_TEST
@ -149,7 +141,7 @@ config USB_UX500_DMA
config USB_INVENTRA_DMA
bool 'Inventra'
depends on USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
depends on USB_MUSB_OMAP2PLUS
help
Enable DMA transfers using Mentor's engine.

1
drivers/usb/musb/Makefile
View File

@ -21,7 +21,6 @@ obj-$(CONFIG_USB_MUSB_DSPS) += musb_dsps.o
obj-$(CONFIG_USB_MUSB_TUSB6010) += tusb6010.o
obj-$(CONFIG_USB_MUSB_DAVINCI) += davinci.o
obj-$(CONFIG_USB_MUSB_DA8XX) += da8xx.o
obj-$(CONFIG_USB_MUSB_BLACKFIN) += blackfin.o
obj-$(CONFIG_USB_MUSB_UX500) += ux500.o
obj-$(CONFIG_USB_MUSB_JZ4740) += jz4740.o
obj-$(CONFIG_USB_MUSB_SUNXI) += sunxi.o

623
drivers/usb/musb/blackfin.c
View File

@ -1,623 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* MUSB OTG controller driver for Blackfin Processors
*
* Copyright 2006-2008 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/list.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/prefetch.h>
#include <linux/usb/usb_phy_generic.h>
#include <asm/cacheflush.h>
#include "musb_core.h"
#include "musbhsdma.h"
#include "blackfin.h"
struct bfin_glue {
struct device *dev;
struct platform_device *musb;
struct platform_device *phy;
};
#define glue_to_musb(g) platform_get_drvdata(g->musb)
static u32 bfin_fifo_offset(u8 epnum)
{
return USB_OFFSET(USB_EP0_FIFO) + (epnum * 8);
}
static u8 bfin_readb(const void __iomem *addr, unsigned offset)
{
return (u8)(bfin_read16(addr + offset));
}
static u16 bfin_readw(const void __iomem *addr, unsigned offset)
{
return bfin_read16(addr + offset);
}
static u32 bfin_readl(const void __iomem *addr, unsigned offset)
{
return (u32)(bfin_read16(addr + offset));
}
static void bfin_writeb(void __iomem *addr, unsigned offset, u8 data)
{
bfin_write16(addr + offset, (u16)data);
}
static void bfin_writew(void __iomem *addr, unsigned offset, u16 data)
{
bfin_write16(addr + offset, data);
}
static void bfin_writel(void __iomem *addr, unsigned offset, u32 data)
{
bfin_write16(addr + offset, (u16)data);
}
/*
* Load an endpoint's FIFO
*/
static void bfin_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
{
struct musb *musb = hw_ep->musb;
void __iomem *fifo = hw_ep->fifo;
void __iomem *epio = hw_ep->regs;
u8 epnum = hw_ep->epnum;
prefetch((u8 *)src);
musb_writew(epio, MUSB_TXCOUNT, len);
dev_dbg(musb->controller, "TX ep%d fifo %p count %d buf %p, epio %p\n",
hw_ep->epnum, fifo, len, src, epio);
dump_fifo_data(src, len);
if (!ANOMALY_05000380 && epnum != 0) {
u16 dma_reg;
flush_dcache_range((unsigned long)src,
(unsigned long)(src + len));
/* Setup DMA address register */
dma_reg = (u32)src;
bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
SSYNC();
dma_reg = (u32)src >> 16;
bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
SSYNC();
/* Setup DMA count register */
bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len);
bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0);
SSYNC();
/* Enable the DMA */
dma_reg = (epnum << 4) | DMA_ENA | INT_ENA | DIRECTION;
bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
SSYNC();
/* Wait for complete */
while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
cpu_relax();
/* acknowledge dma interrupt */
bfin_write_USB_DMA_INTERRUPT(1 << epnum);
SSYNC();
/* Reset DMA */
bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0);
SSYNC();
} else {
SSYNC();
if (unlikely((unsigned long)src & 0x01))
outsw_8((unsigned long)fifo, src, (len + 1) >> 1);
else
outsw((unsigned long)fifo, src, (len + 1) >> 1);
}
}
/*
* Unload an endpoint's FIFO
*/
static void bfin_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
{
struct musb *musb = hw_ep->musb;
void __iomem *fifo = hw_ep->fifo;
u8 epnum = hw_ep->epnum;
if (ANOMALY_05000467 && epnum != 0) {
u16 dma_reg;
invalidate_dcache_range((unsigned long)dst,
(unsigned long)(dst + len));
/* Setup DMA address register */
dma_reg = (u32)dst;
bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
SSYNC();
dma_reg = (u32)dst >> 16;
bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
SSYNC();
/* Setup DMA count register */
bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len);
bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0);
SSYNC();
/* Enable the DMA */
dma_reg = (epnum << 4) | DMA_ENA | INT_ENA;
bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
SSYNC();
/* Wait for complete */
while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
cpu_relax();
/* acknowledge dma interrupt */
bfin_write_USB_DMA_INTERRUPT(1 << epnum);
SSYNC();
/* Reset DMA */
bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0);
SSYNC();
} else {
SSYNC();
/* Read the last byte of packet with odd size from address fifo + 4
* to trigger 1 byte access to EP0 FIFO.
*/
if (len == 1)
*dst = (u8)inw((unsigned long)fifo + 4);
else {
if (unlikely((unsigned long)dst & 0x01))
insw_8((unsigned long)fifo, dst, len >> 1);
else
insw((unsigned long)fifo, dst, len >> 1);
if (len & 0x01)
*(dst + len - 1) = (u8)inw((unsigned long)fifo + 4);
}
}
dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
'R', hw_ep->epnum, fifo, len, dst);
dump_fifo_data(dst, len);
}
static irqreturn_t blackfin_interrupt(int irq, void *__hci)
{
unsigned long flags;
irqreturn_t retval = IRQ_NONE;
struct musb *musb = __hci;
spin_lock_irqsave(&musb->lock, flags);
musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
if (musb->int_usb || musb->int_tx || musb->int_rx) {
musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb);
musb_writew(musb->mregs, MUSB_INTRTX, musb->int_tx);
musb_writew(musb->mregs, MUSB_INTRRX, musb->int_rx);
retval = musb_interrupt(musb);
}
/* Start sampling ID pin, when plug is removed from MUSB */
if ((musb->xceiv->otg->state == OTG_STATE_B_IDLE
|| musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON) ||
(musb->int_usb & MUSB_INTR_DISCONNECT && is_host_active(musb))) {
mod_timer(&musb->dev_timer, jiffies + TIMER_DELAY);
musb->a_wait_bcon = TIMER_DELAY;
}
spin_unlock_irqrestore(&musb->lock, flags);
return retval;
}
static void musb_conn_timer_handler(struct timer_list *t)
{
struct musb *musb = from_timer(musb, t, dev_timer);
unsigned long flags;
u16 val;
static u8 toggle;
spin_lock_irqsave(&musb->lock, flags);
switch (musb->xceiv->otg->state) {
case OTG_STATE_A_IDLE:
case OTG_STATE_A_WAIT_BCON:
/* Start a new session */
val = musb_readw(musb->mregs, MUSB_DEVCTL);
val &= ~MUSB_DEVCTL_SESSION;
musb_writew(musb->mregs, MUSB_DEVCTL, val);
val |= MUSB_DEVCTL_SESSION;
musb_writew(musb->mregs, MUSB_DEVCTL, val);
/* Check if musb is host or peripheral. */
val = musb_readw(musb->mregs, MUSB_DEVCTL);
if (!(val & MUSB_DEVCTL_BDEVICE)) {
gpio_set_value(musb->config->gpio_vrsel, 1);
musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
} else {
gpio_set_value(musb->config->gpio_vrsel, 0);
/* Ignore VBUSERROR and SUSPEND IRQ */
val = musb_readb(musb->mregs, MUSB_INTRUSBE);
val &= ~MUSB_INTR_VBUSERROR;
musb_writeb(musb->mregs, MUSB_INTRUSBE, val);
val = MUSB_INTR_SUSPEND | MUSB_INTR_VBUSERROR;
musb_writeb(musb->mregs, MUSB_INTRUSB, val);
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
}
mod_timer(&musb->dev_timer, jiffies + TIMER_DELAY);
break;
case OTG_STATE_B_IDLE:
/*
* Start a new session. It seems that MUSB needs taking
* some time to recognize the type of the plug inserted?
*/
val = musb_readw(musb->mregs, MUSB_DEVCTL);
val |= MUSB_DEVCTL_SESSION;
musb_writew(musb->mregs, MUSB_DEVCTL, val);
val = musb_readw(musb->mregs, MUSB_DEVCTL);
if (!(val & MUSB_DEVCTL_BDEVICE)) {
gpio_set_value(musb->config->gpio_vrsel, 1);
musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
} else {
gpio_set_value(musb->config->gpio_vrsel, 0);
/* Ignore VBUSERROR and SUSPEND IRQ */
val = musb_readb(musb->mregs, MUSB_INTRUSBE);
val &= ~MUSB_INTR_VBUSERROR;
musb_writeb(musb->mregs, MUSB_INTRUSBE, val);
val = MUSB_INTR_SUSPEND | MUSB_INTR_VBUSERROR;
musb_writeb(musb->mregs, MUSB_INTRUSB, val);
/* Toggle the Soft Conn bit, so that we can response to
* the inserting of either A-plug or B-plug.
*/
if (toggle) {
val = musb_readb(musb->mregs, MUSB_POWER);
val &= ~MUSB_POWER_SOFTCONN;
musb_writeb(musb->mregs, MUSB_POWER, val);
toggle = 0;
} else {
val = musb_readb(musb->mregs, MUSB_POWER);
val |= MUSB_POWER_SOFTCONN;
musb_writeb(musb->mregs, MUSB_POWER, val);
toggle = 1;
}
/* The delay time is set to 1/4 second by default,
* shortening it, if accelerating A-plug detection
* is needed in OTG mode.
*/
mod_timer(&musb->dev_timer, jiffies + TIMER_DELAY / 4);
}
break;
default:
dev_dbg(musb->controller, "%s state not handled\n",
usb_otg_state_string(musb->xceiv->otg->state));
break;
}
spin_unlock_irqrestore(&musb->lock, flags);
dev_dbg(musb->controller, "state is %s\n",
usb_otg_state_string(musb->xceiv->otg->state));
}
static void bfin_musb_enable(struct musb *musb)
{
/* REVISIT is this really correct ? */
}
static void bfin_musb_disable(struct musb *musb)
{
}
static void bfin_musb_set_vbus(struct musb *musb, int is_on)
{
int value = musb->config->gpio_vrsel_active;
if (!is_on)
value = !value;
gpio_set_value(musb->config->gpio_vrsel, value);
dev_dbg(musb->controller, "VBUS %s, devctl %02x "
/* otg %3x conf %08x prcm %08x */ "\n",
usb_otg_state_string(musb->xceiv->otg->state),
musb_readb(musb->mregs, MUSB_DEVCTL));
}
static int bfin_musb_set_power(struct usb_phy *x, unsigned mA)
{
return 0;
}
static int bfin_musb_vbus_status(struct musb *musb)
{
return 0;
}
static int bfin_musb_set_mode(struct musb *musb, u8 musb_mode)
{
return -EIO;
}
static int bfin_musb_adjust_channel_params(struct dma_channel *channel,
u16 packet_sz, u8 *mode,
dma_addr_t *dma_addr, u32 *len)
{
struct musb_dma_channel *musb_channel = channel->private_data;
/*
* Anomaly 05000450 might cause data corruption when using DMA
* MODE 1 transmits with short packet. So to work around this,
* we truncate all MODE 1 transfers down to a multiple of the
* max packet size, and then do the last short packet transfer
* (if there is any) using MODE 0.
*/
if (ANOMALY_05000450) {
if (musb_channel->transmit && *mode == 1)
*len = *len - (*len % packet_sz);
}
return 0;
}
static void bfin_musb_reg_init(struct musb *musb)
{
if (ANOMALY_05000346) {
bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
SSYNC();
}
if (ANOMALY_05000347) {
bfin_write_USB_APHY_CNTRL(0x0);
SSYNC();
}
/* Configure PLL oscillator register */
bfin_write_USB_PLLOSC_CTRL(0x3080 |
((480/musb->config->clkin) << 1));
SSYNC();
bfin_write_USB_SRP_CLKDIV((get_sclk()/1000) / 32 - 1);
SSYNC();
bfin_write_USB_EP_NI0_RXMAXP(64);
SSYNC();
bfin_write_USB_EP_NI0_TXMAXP(64);
SSYNC();
/* Route INTRUSB/INTR_RX/INTR_TX to USB_INT0*/
bfin_write_USB_GLOBINTR(0x7);
SSYNC();
bfin_write_USB_GLOBAL_CTL(GLOBAL_ENA | EP1_TX_ENA | EP2_TX_ENA |
EP3_TX_ENA | EP4_TX_ENA | EP5_TX_ENA |
EP6_TX_ENA | EP7_TX_ENA | EP1_RX_ENA |
EP2_RX_ENA | EP3_RX_ENA | EP4_RX_ENA |
EP5_RX_ENA | EP6_RX_ENA | EP7_RX_ENA);
SSYNC();
}
static int bfin_musb_init(struct musb *musb)
{
/*
* Rev 1.0 BF549 EZ-KITs require PE7 to be high for both DEVICE
* and OTG HOST modes, while rev 1.1 and greater require PE7 to
* be low for DEVICE mode and high for HOST mode. We set it high
* here because we are in host mode
*/
if (gpio_request(musb->config->gpio_vrsel, "USB_VRSEL")) {
printk(KERN_ERR "Failed ro request USB_VRSEL GPIO_%d\n",
musb->config->gpio_vrsel);
return -ENODEV;
}
gpio_direction_output(musb->config->gpio_vrsel, 0);
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(musb->xceiv)) {
gpio_free(musb->config->gpio_vrsel);
return -EPROBE_DEFER;
}
bfin_musb_reg_init(musb);
timer_setup(&musb->dev_timer, musb_conn_timer_handler, 0);
musb->xceiv->set_power = bfin_musb_set_power;
musb->isr = blackfin_interrupt;
musb->double_buffer_not_ok = true;
return 0;
}
static int bfin_musb_exit(struct musb *musb)
{
gpio_free(musb->config->gpio_vrsel);
usb_put_phy(musb->xceiv);
return 0;
}
static const struct musb_platform_ops bfin_ops = {
.quirks = MUSB_DMA_INVENTRA,
.init = bfin_musb_init,
.exit = bfin_musb_exit,
.fifo_offset = bfin_fifo_offset,
.readb = bfin_readb,
.writeb = bfin_writeb,
.readw = bfin_readw,
.writew = bfin_writew,
.readl = bfin_readl,
.writel = bfin_writel,
.fifo_mode = 2,
.read_fifo = bfin_read_fifo,
.write_fifo = bfin_write_fifo,
#ifdef CONFIG_USB_INVENTRA_DMA
.dma_init = musbhs_dma_controller_create,
.dma_exit = musbhs_dma_controller_destroy,
#endif
.enable = bfin_musb_enable,
.disable = bfin_musb_disable,
.set_mode = bfin_musb_set_mode,
.vbus_status = bfin_musb_vbus_status,
.set_vbus = bfin_musb_set_vbus,
.adjust_channel_params = bfin_musb_adjust_channel_params,
};
static u64 bfin_dmamask = DMA_BIT_MASK(32);
static int bfin_probe(struct platform_device *pdev)
{
struct resource musb_resources[2];
struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct platform_device *musb;
struct bfin_glue *glue;
int ret = -ENOMEM;
glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
if (!glue)
goto err0;
musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
if (!musb)
goto err0;
musb->dev.parent = &pdev->dev;
musb->dev.dma_mask = &bfin_dmamask;
musb->dev.coherent_dma_mask = bfin_dmamask;
glue->dev = &pdev->dev;
glue->musb = musb;
pdata->platform_ops = &bfin_ops;
glue->phy = usb_phy_generic_register();
if (IS_ERR(glue->phy))
goto err1;
platform_set_drvdata(pdev, glue);
memset(musb_resources, 0x00, sizeof(*musb_resources) *
ARRAY_SIZE(musb_resources));
musb_resources[0].name = pdev->resource[0].name;
musb_resources[0].start = pdev->resource[0].start;
musb_resources[0].end = pdev->resource[0].end;
musb_resources[0].flags = pdev->resource[0].flags;
musb_resources[1].name = pdev->resource[1].name;
musb_resources[1].start = pdev->resource[1].start;
musb_resources[1].end = pdev->resource[1].end;
musb_resources[1].flags = pdev->resource[1].flags;
ret = platform_device_add_resources(musb, musb_resources,
ARRAY_SIZE(musb_resources));
if (ret) {
dev_err(&pdev->dev, "failed to add resources\n");
goto err2;
}
ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
if (ret) {
dev_err(&pdev->dev, "failed to add platform_data\n");
goto err2;
}
ret = platform_device_add(musb);
if (ret) {
dev_err(&pdev->dev, "failed to register musb device\n");
goto err2;
}
return 0;
err2:
usb_phy_generic_unregister(glue->phy);
err1:
platform_device_put(musb);
err0:
return ret;
}
static int bfin_remove(struct platform_device *pdev)
{
struct bfin_glue *glue = platform_get_drvdata(pdev);
platform_device_unregister(glue->musb);
usb_phy_generic_unregister(glue->phy);
return 0;
}
static int __maybe_unused bfin_suspend(struct device *dev)
{
struct bfin_glue *glue = dev_get_drvdata(dev);
struct musb *musb = glue_to_musb(glue);
if (is_host_active(musb))
/*
* During hibernate gpio_vrsel will change from high to low
* low which will generate wakeup event resume the system
* immediately. Set it to 0 before hibernate to avoid this
* wakeup event.
*/
gpio_set_value(musb->config->gpio_vrsel, 0);
return 0;
}
static int __maybe_unused bfin_resume(struct device *dev)
{
struct bfin_glue *glue = dev_get_drvdata(dev);
struct musb *musb = glue_to_musb(glue);
bfin_musb_reg_init(musb);
return 0;
}
static SIMPLE_DEV_PM_OPS(bfin_pm_ops, bfin_suspend, bfin_resume);
static struct platform_driver bfin_driver = {
.probe = bfin_probe,
.remove = bfin_remove,
.driver = {
.name = "musb-blackfin",
.pm = &bfin_pm_ops,
},
};
MODULE_DESCRIPTION("Blackfin MUSB Glue Layer");
MODULE_AUTHOR("Bryan Wy <cooloney@kernel.org>");
MODULE_LICENSE("GPL v2");
module_platform_driver(bfin_driver);

81
drivers/usb/musb/blackfin.h
View File

@ -1,81 +0,0 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2007 by Analog Devices, Inc.
*/
#ifndef __MUSB_BLACKFIN_H__
#define __MUSB_BLACKFIN_H__
/*
* Blackfin specific definitions
*/
/* Anomalies notes:
*
* 05000450 - USB DMA Mode 1 Short Packet Data Corruption:
* MUSB driver is designed to transfer buffer of N * maxpacket size
* in DMA mode 1 and leave the rest of the data to the next
* transfer in DMA mode 0, so we never transmit a short packet in
* DMA mode 1.
*
* 05000463 - This anomaly doesn't affect this driver since it
* never uses L1 or L2 memory as data destination.
*
* 05000464 - This anomaly doesn't affect this driver since it
* never uses L1 or L2 memory as data source.
*
* 05000465 - The anomaly can be seen when SCLK is over 100 MHz, and there is
* no way to workaround for bulk endpoints. Since the wMaxPackSize
* of bulk is less than or equal to 512, while the fifo size of
* endpoint 5, 6, 7 is 1024, the double buffer mode is enabled
* automatically when these endpoints are used for bulk OUT.
*
* 05000466 - This anomaly doesn't affect this driver since it never mixes
* concurrent DMA and core accesses to the TX endpoint FIFOs.
*
* 05000467 - The workaround for this anomaly will introduce another
* anomaly - 05000465.
*/
/* The Mentor USB DMA engine on BF52x (silicon v0.0 and v0.1) seems to be
* unstable in host mode. This may be caused by Anomaly 05000380. After
* digging out the root cause, we will change this number accordingly.
* So, need to either use silicon v0.2+ or disable DMA mode in MUSB.
*/
#if ANOMALY_05000380 && defined(CONFIG_BF52x) && \
!defined(CONFIG_MUSB_PIO_ONLY)
# error "Please use PIO mode in MUSB driver on bf52x chip v0.0 and v0.1"
#endif
#undef DUMP_FIFO_DATA
#ifdef DUMP_FIFO_DATA
static void dump_fifo_data(u8 *buf, u16 len)
{
u8 *tmp = buf;
int i;
for (i = 0; i < len; i++) {
if (!(i % 16) && i)
pr_debug("\n");
pr_debug("%02x ", *tmp++);
}
pr_debug("\n");
}
#else
#define dump_fifo_data(buf, len) do {} while (0)
#endif
#define USB_DMA_BASE USB_DMA_INTERRUPT
#define USB_DMAx_CTRL 0x04
#define USB_DMAx_ADDR_LOW 0x08
#define USB_DMAx_ADDR_HIGH 0x0C
#define USB_DMAx_COUNT_LOW 0x10
#define USB_DMAx_COUNT_HIGH 0x14
#define USB_DMA_REG(ep, reg) (USB_DMA_BASE + 0x20 * ep + reg)
/* Almost 1 second */
#define TIMER_DELAY (1 * HZ)
#endif /* __MUSB_BLACKFIN_H__ */

7
drivers/usb/musb/musb_core.c
View File

@ -126,7 +126,6 @@ EXPORT_SYMBOL_GPL(musb_get_mode);
/*-------------------------------------------------------------------------*/
#ifndef CONFIG_BLACKFIN
static int musb_ulpi_read(struct usb_phy *phy, u32 reg)
{
void __iomem *addr = phy->io_priv;
@ -208,10 +207,6 @@ out:
return ret;
}
#else
#define musb_ulpi_read NULL
#define musb_ulpi_write NULL
#endif
static struct usb_phy_io_ops musb_ulpi_access = {
.read = musb_ulpi_read,
@ -2171,7 +2166,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
* - initializes musb->xceiv, usually by otg_get_phy()
* - stops powering VBUS
*
* There are various transceiver configurations. Blackfin,
* There are various transceiver configurations.
* DaVinci, TUSB60x0, and others integrate them. OMAP3 uses
* external/discrete ones in various flavors (twl4030 family,
* isp1504, non-OTG, etc) mostly hooking up through ULPI.

43
drivers/usb/musb/musb_core.h
View File

@ -414,19 +414,6 @@ struct musb {
struct usb_gadget_driver *gadget_driver; /* its driver */
struct usb_hcd *hcd; /* the usb hcd */
/*
* FIXME: Remove this flag.
*
* This is only added to allow Blackfin to work
* with current driver. For some unknown reason
* Blackfin doesn't work with double buffering
* and that's enabled by default.
*
* We added this flag to forcefully disable double
* buffering until we get it working.
*/
unsigned double_buffer_not_ok:1;
const struct musb_hdrc_config *config;
int xceiv_old_state;
@ -467,34 +454,6 @@ static inline char *musb_ep_xfertype_string(u8 type)
return s;
}
#ifdef CONFIG_BLACKFIN
static inline int musb_read_fifosize(struct musb *musb,
struct musb_hw_ep *hw_ep, u8 epnum)
{
musb->nr_endpoints++;
musb->epmask |= (1 << epnum);
if (epnum < 5) {
hw_ep->max_packet_sz_tx = 128;
hw_ep->max_packet_sz_rx = 128;
} else {
hw_ep->max_packet_sz_tx = 1024;
hw_ep->max_packet_sz_rx = 1024;
}
hw_ep->is_shared_fifo = false;
return 0;
}
static inline void musb_configure_ep0(struct musb *musb)
{
musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
musb->endpoints[0].is_shared_fifo = true;
}
#else
static inline int musb_read_fifosize(struct musb *musb,
struct musb_hw_ep *hw_ep, u8 epnum)
{
@ -531,8 +490,6 @@ static inline void musb_configure_ep0(struct musb *musb)
musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
musb->endpoints[0].is_shared_fifo = true;
}
#endif /* CONFIG_BLACKFIN */
/***************************** Glue it together *****************************/

2
drivers/usb/musb/musb_debugfs.c
View File

@ -70,7 +70,6 @@ static const struct musb_register_map musb_regmap[] = {
{ "DMA_CNTLch7", 0x274, 16 },
{ "DMA_ADDRch7", 0x278, 32 },
{ "DMA_COUNTch7", 0x27C, 32 },
#ifndef CONFIG_BLACKFIN
{ "ConfigData", MUSB_CONFIGDATA,8 },
{ "BabbleCtl", MUSB_BABBLE_CTL,8 },
{ "TxFIFOsz", MUSB_TXFIFOSZ, 8 },
@ -79,7 +78,6 @@ static const struct musb_register_map musb_regmap[] = {
{ "RxFIFOadd", MUSB_RXFIFOADD, 16 },
{ "EPInfo", MUSB_EPINFO, 8 },
{ "RAMInfo", MUSB_RAMINFO, 8 },
#endif
{ } /* Terminating Entry */
};

11
drivers/usb/musb/musb_dma.h
View File

@ -80,17 +80,6 @@ struct musb_hw_ep;
#define is_cppi_enabled(musb) 0
#endif
/* Anomaly 05000456 - USB Receive Interrupt Is Not Generated in DMA Mode 1
* Only allow DMA mode 1 to be used when the USB will actually generate the
* interrupts we expect.
*/
#ifdef CONFIG_BLACKFIN
# undef USE_MODE1
# if !ANOMALY_05000456
# define USE_MODE1
# endif
#endif
/*
* DMA channel status ... updated by the dma controller driver whenever that
* status changes, and protected by the overall controller spinlock.

42
drivers/usb/musb/musb_gadget.c
View File

@ -995,15 +995,11 @@ static int musb_gadget_enable(struct usb_ep *ep,
/* Set TXMAXP with the FIFO size of the endpoint
* to disable double buffering mode.
*/
if (musb->double_buffer_not_ok) {
musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx);
} else {
if (can_bulk_split(musb, musb_ep->type))
musb_ep->hb_mult = (hw_ep->max_packet_sz_tx /
musb_ep->packet_sz) - 1;
musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz
| (musb_ep->hb_mult << 11));
}
csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
if (musb_readw(regs, MUSB_TXCSR)
@ -1038,9 +1034,6 @@ static int musb_gadget_enable(struct usb_ep *ep,
/* Set RXMAXP with the FIFO size of the endpoint
* to disable double buffering mode.
*/
if (musb->double_buffer_not_ok)
musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_tx);
else
musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz
| (musb_ep->hb_mult << 11));
@ -1680,40 +1673,6 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
return 0;
}
#ifdef CONFIG_BLACKFIN
static struct usb_ep *musb_match_ep(struct usb_gadget *g,
struct usb_endpoint_descriptor *desc,
struct usb_ss_ep_comp_descriptor *ep_comp)
{
struct usb_ep *ep = NULL;
switch (usb_endpoint_type(desc)) {
case USB_ENDPOINT_XFER_ISOC:
case USB_ENDPOINT_XFER_BULK:
if (usb_endpoint_dir_in(desc))
ep = gadget_find_ep_by_name(g, "ep5in");
else
ep = gadget_find_ep_by_name(g, "ep6out");
break;
case USB_ENDPOINT_XFER_INT:
if (usb_endpoint_dir_in(desc))
ep = gadget_find_ep_by_name(g, "ep1in");
else
ep = gadget_find_ep_by_name(g, "ep2out");
break;
default:
break;
}
if (ep && usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
return ep;
return NULL;
}
#else
#define musb_match_ep NULL
#endif
static int musb_gadget_start(struct usb_gadget *g,
struct usb_gadget_driver *driver);
static int musb_gadget_stop(struct usb_gadget *g);
@ -1727,7 +1686,6 @@ static const struct usb_gadget_ops musb_gadget_operations = {
.pullup = musb_gadget_pullup,
.udc_start = musb_gadget_start,
.udc_stop = musb_gadget_stop,
.match_ep = musb_match_ep,
};
/* ----------------------------------------------------------------------- */

8
drivers/usb/musb/musb_host.c
View File

@ -574,9 +574,6 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, u8 epnum)
/* Set RXMAXP with the FIFO size of the endpoint
* to disable double buffer mode.
*/
if (musb->double_buffer_not_ok)
musb_writew(ep->regs, MUSB_RXMAXP, ep->max_packet_sz_rx);
else
musb_writew(ep->regs, MUSB_RXMAXP,
qh->maxpacket | ((qh->hb_mult - 1) << 11));
@ -804,10 +801,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
/* protocol/endpoint/interval/NAKlimit */
if (epnum) {
musb_writeb(epio, MUSB_TXTYPE, qh->type_reg);
if (musb->double_buffer_not_ok) {
musb_writew(epio, MUSB_TXMAXP,
hw_ep->max_packet_sz_tx);
} else if (can_bulk_split(musb, qh->type)) {
if (can_bulk_split(musb, qh->type)) {
qh->hb_mult = hw_ep->max_packet_sz_tx
/ packet_sz;
musb_writew(epio, MUSB_TXMAXP, packet_sz

182
drivers/usb/musb/musb_regs.h
View File

@ -195,8 +195,6 @@
#define MUSB_HUBADDR_MULTI_TT 0x80
#ifndef CONFIG_BLACKFIN
/*
* Common USB registers
*/
@ -416,184 +414,4 @@ static inline u8 musb_read_txhubport(struct musb *musb, u8 epnum)
musb->io.busctl_offset(epnum, MUSB_TXHUBPORT));
}
#else /* CONFIG_BLACKFIN */
#define USB_BASE USB_FADDR
#define USB_OFFSET(reg) (reg - USB_BASE)
/*
* Common USB registers
*/
#define MUSB_FADDR USB_OFFSET(USB_FADDR) /* 8-bit */
#define MUSB_POWER USB_OFFSET(USB_POWER) /* 8-bit */
#define MUSB_INTRTX USB_OFFSET(USB_INTRTX) /* 16-bit */
#define MUSB_INTRRX USB_OFFSET(USB_INTRRX)
#define MUSB_INTRTXE USB_OFFSET(USB_INTRTXE)
#define MUSB_INTRRXE USB_OFFSET(USB_INTRRXE)
#define MUSB_INTRUSB USB_OFFSET(USB_INTRUSB) /* 8 bit */
#define MUSB_INTRUSBE USB_OFFSET(USB_INTRUSBE)/* 8 bit */
#define MUSB_FRAME USB_OFFSET(USB_FRAME)
#define MUSB_INDEX USB_OFFSET(USB_INDEX) /* 8 bit */
#define MUSB_TESTMODE USB_OFFSET(USB_TESTMODE)/* 8 bit */
/*
* Additional Control Registers
*/
#define MUSB_DEVCTL USB_OFFSET(USB_OTG_DEV_CTL) /* 8 bit */
#define MUSB_LINKINFO USB_OFFSET(USB_LINKINFO)/* 8 bit */
#define MUSB_VPLEN USB_OFFSET(USB_VPLEN) /* 8 bit */
#define MUSB_HS_EOF1 USB_OFFSET(USB_HS_EOF1) /* 8 bit */
#define MUSB_FS_EOF1 USB_OFFSET(USB_FS_EOF1) /* 8 bit */
#define MUSB_LS_EOF1 USB_OFFSET(USB_LS_EOF1) /* 8 bit */
/* Offsets to endpoint registers */
#define MUSB_TXMAXP 0x00
#define MUSB_TXCSR 0x04
#define MUSB_CSR0 MUSB_TXCSR /* Re-used for EP0 */
#define MUSB_RXMAXP 0x08
#define MUSB_RXCSR 0x0C
#define MUSB_RXCOUNT 0x10
#define MUSB_COUNT0 MUSB_RXCOUNT /* Re-used for EP0 */
#define MUSB_TXTYPE 0x14
#define MUSB_TYPE0 MUSB_TXTYPE /* Re-used for EP0 */
#define MUSB_TXINTERVAL 0x18
#define MUSB_NAKLIMIT0 MUSB_TXINTERVAL /* Re-used for EP0 */
#define MUSB_RXTYPE 0x1C
#define MUSB_RXINTERVAL 0x20
#define MUSB_TXCOUNT 0x28
/* Offsets to endpoint registers in indexed model (using INDEX register) */
#define MUSB_INDEXED_OFFSET(_epnum, _offset) \
(0x40 + (_offset))
/* Offsets to endpoint registers in flat models */
#define MUSB_FLAT_OFFSET(_epnum, _offset) \
(USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset))
/* Not implemented - HW has separate Tx/Rx FIFO */
#define MUSB_TXCSR_MODE 0x0000
static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
{
}
static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off)
{
}
static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size)
{
}
static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
{
}
static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
{
}
static inline u8 musb_read_txfifosz(void __iomem *mbase)
{
return 0;
}
static inline u16 musb_read_txfifoadd(void __iomem *mbase)
{
return 0;
}
static inline u8 musb_read_rxfifosz(void __iomem *mbase)
{
return 0;
}
static inline u16 musb_read_rxfifoadd(void __iomem *mbase)
{
return 0;
}
static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
{
return 0;
}
static inline u8 musb_read_configdata(void __iomem *mbase)
{
return 0;
}
static inline u16 musb_read_hwvers(void __iomem *mbase)
{
/*
* This register is invisible on Blackfin, actually the MUSB
* RTL version of Blackfin is 1.9, so just hardcode its value.
*/
return MUSB_HWVERS_1900;
}
static inline void musb_write_rxfunaddr(void __iomem *mbase, u8 epnum,
u8 qh_addr_req)
{
}
static inline void musb_write_rxhubaddr(void __iomem *mbase, u8 epnum,
u8 qh_h_addr_reg)
{
}
static inline void musb_write_rxhubport(void __iomem *mbase, u8 epnum,
u8 qh_h_port_reg)
{
}
static inline void musb_write_txfunaddr(void __iomem *mbase, u8 epnum,
u8 qh_addr_reg)
{
}
static inline void musb_write_txhubaddr(void __iomem *mbase, u8 epnum,
u8 qh_addr_reg)
{
}
static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum,
u8 qh_h_port_reg)
{
}
static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum)
{
return 0;
}
static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum)
{
return 0;
}
static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum)
{
return 0;
}
static inline u8 musb_read_txfunaddr(void __iomem *mbase, u8 epnum)
{
return 0;
}
static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
{
return 0;
}
static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum)
{
return 0;
}
#endif /* CONFIG_BLACKFIN */
#endif /* __MUSB_REGS_H__ */

5
drivers/usb/musb/musbhsdma.c
View File

@ -235,11 +235,6 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR);
#ifdef CONFIG_BLACKFIN
/* Clear DMA interrupt flags */
musb_writeb(mbase, MUSB_HSDMA_INTR, int_hsdma);
#endif
if (!int_hsdma) {
musb_dbg(musb, "spurious DMA irq");

64
drivers/usb/musb/musbhsdma.h
View File

@ -6,8 +6,6 @@
* Copyright (C) 2005-2007 by Texas Instruments
*/
#ifndef CONFIG_BLACKFIN
#define MUSB_HSDMA_BASE 0x200
#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0)
#define MUSB_HSDMA_CONTROL 0x4
@ -34,68 +32,6 @@
musb_writel(mbase, \
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT), \
len)
#else
#define MUSB_HSDMA_BASE 0x400
#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0)
#define MUSB_HSDMA_CONTROL 0x04
#define MUSB_HSDMA_ADDR_LOW 0x08
#define MUSB_HSDMA_ADDR_HIGH 0x0C
#define MUSB_HSDMA_COUNT_LOW 0x10
#define MUSB_HSDMA_COUNT_HIGH 0x14
#define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset) \
(MUSB_HSDMA_BASE + (_bchannel * 0x20) + _offset)
static inline u32 musb_read_hsdma_addr(void __iomem *mbase, u8 bchannel)
{
u32 addr = musb_readw(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH));
addr = addr << 16;
addr |= musb_readw(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW));
return addr;
}
static inline void musb_write_hsdma_addr(void __iomem *mbase,
u8 bchannel, dma_addr_t dma_addr)
{
musb_writew(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW),
dma_addr);
musb_writew(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH),
(dma_addr >> 16));
}
static inline u32 musb_read_hsdma_count(void __iomem *mbase, u8 bchannel)
{
u32 count = musb_readw(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH));
count = count << 16;
count |= musb_readw(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW));
return count;
}
static inline void musb_write_hsdma_count(void __iomem *mbase,
u8 bchannel, u32 len)
{
musb_writew(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW),len);
musb_writew(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH),
(len >> 16));
}
#endif /* CONFIG_BLACKFIN */
/* control register (16-bit): */
#define MUSB_HSDMA_ENABLE_SHIFT 0
#define MUSB_HSDMA_TRANSMIT_SHIFT 1

7
include/linux/usb/musb.h
View File

@ -89,13 +89,6 @@ struct musb_hdrc_config {
u8 ram_bits; /* ram address size */
struct musb_hdrc_eps_bits *eps_bits __deprecated;
#ifdef CONFIG_BLACKFIN
/* A GPIO controlling VRSEL in Blackfin */
unsigned int gpio_vrsel;
unsigned int gpio_vrsel_active;
/* musb CLKIN in Blackfin in MHZ */
unsigned char clkin;
#endif
u32 maximum_speed;
};