serial: 8250: Fall back to non-DMA Rx if IIR_RDI occurs
DW UART sometimes triggers IIR_RDI during DMA Rx when IIR_RX_TIMEOUT
should have been triggered instead. Since IIR_RDI has higher priority
than IIR_RX_TIMEOUT, this causes the Rx to hang into interrupt loop.
The problem seems to occur at least with some combinations of
small-sized transfers (I've reproduced the problem on Elkhart Lake PSE
UARTs).
If there's already an on-going Rx DMA and IIR_RDI triggers, fall
graciously back to non-DMA Rx. That is, behave as if IIR_RX_TIMEOUT had
occurred.
8250_omap already considers IIR_RDI similar to this change so its
nothing unheard of.
Fixes: 75df022b5f
("serial: 8250_dma: Fix RX handling")
Cc: <stable@vger.kernel.org>
Co-developed-by: Srikanth Thokala <srikanth.thokala@intel.com>
Signed-off-by: Srikanth Thokala <srikanth.thokala@intel.com>
Co-developed-by: Aman Kumar <aman.kumar@intel.com>
Signed-off-by: Aman Kumar <aman.kumar@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221108121952.5497-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
parent
7b7dfe4833
commit
a931237cbe
|
@ -1897,6 +1897,10 @@ EXPORT_SYMBOL_GPL(serial8250_modem_status);
|
|||
static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir)
|
||||
{
|
||||
switch (iir & 0x3f) {
|
||||
case UART_IIR_RDI:
|
||||
if (!up->dma->rx_running)
|
||||
break;
|
||||
fallthrough;
|
||||
case UART_IIR_RX_TIMEOUT:
|
||||
serial8250_rx_dma_flush(up);
|
||||
fallthrough;
|
||||
|
|
Loading…
Reference in New Issue