Merge branch 4.16-rc6 into usb-next

We want the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/PCI/pci.txt

@@ -570,7 +570,9 @@ your driver if they're helpful, or just use plain hex constants.
 The device IDs are arbitrary hex numbers (vendor controlled) and normally used
 only in a single location, the pci_device_id table.
 
-Please DO submit new vendor/device IDs to http://pciids.sourceforge.net/.
+Please DO submit new vendor/device IDs to http://pci-ids.ucw.cz/.
+There are mirrors of the pci.ids file at http://pciids.sourceforge.net/
+and https://github.com/pciutils/pciids.
 
 
 

Documentation/accelerators/ocxl.rst

@@ -152,6 +152,11 @@ OCXL_IOCTL_IRQ_SET_FD:
   Associate an event fd to an AFU interrupt so that the user process
   can be notified when the AFU sends an interrupt.
 
+OCXL_IOCTL_GET_METADATA:
+
+  Obtains configuration information from the card, such at the size of
+  MMIO areas, the AFU version, and the PASID for the current context.
+
 
 mmap
 ----

Documentation/devicetree/bindings/dma/mv-xor-v2.txt

@@ -11,7 +11,11 @@ Required properties:
   interrupts.
 
 Optional properties:
-- clocks: Optional reference to the clock used by the XOR engine.
+- clocks: Optional reference to the clocks used by the XOR engine.
+- clock-names: mandatory if there is a second clock, in this case the
+   name must be "core" for the first clock and "reg" for the second
+   one
+
 
 Example:
 

Documentation/devicetree/bindings/eeprom/at24.txt

@@ -38,9 +38,9 @@ Required properties:
 
                 "catalyst",
                 "microchip",
+                "nxp",
                 "ramtron",
                 "renesas",
-                "nxp",
                 "st",
 
                 Some vendors use different model names for chips which are just

Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt

@@ -14,6 +14,7 @@ Required properties:
     - "renesas,irqc-r8a7794" (R-Car E2)
     - "renesas,intc-ex-r8a7795" (R-Car H3)
     - "renesas,intc-ex-r8a7796" (R-Car M3-W)
+    - "renesas,intc-ex-r8a77965" (R-Car M3-N)
     - "renesas,intc-ex-r8a77970" (R-Car V3M)
     - "renesas,intc-ex-r8a77995" (R-Car D3)
 - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in

Documentation/devicetree/bindings/net/renesas,ravb.txt

@@ -18,6 +18,7 @@ Required properties:
       - "renesas,etheravb-r8a7795" for the R8A7795 SoC.
       - "renesas,etheravb-r8a7796" for the R8A7796 SoC.
       - "renesas,etheravb-r8a77970" for the R8A77970 SoC.
+      - "renesas,etheravb-r8a77980" for the R8A77980 SoC.
       - "renesas,etheravb-r8a77995" for the R8A77995 SoC.
       - "renesas,etheravb-rcar-gen3" as a fallback for the above
 		R-Car Gen3 devices.

Documentation/devicetree/bindings/power/wakeup-source.txt

@@ -60,7 +60,7 @@ Examples
 		#size-cells = <0>;
 
 		button@1 {
-			debounce_interval = <50>;
+			debounce-interval = <50>;
 			wakeup-source;
 			linux,code = <116>;
 			label = "POWER";

Documentation/devicetree/bindings/thermal/imx-thermal.txt

@@ -22,7 +22,32 @@ Optional properties:
 - clocks : thermal sensor's clock source.
 
 Example:
+ocotp: ocotp@21bc000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,imx6sx-ocotp", "syscon";
+	reg = <0x021bc000 0x4000>;
+	clocks = <&clks IMX6SX_CLK_OCOTP>;
 
+	tempmon_calib: calib@38 {
+		reg = <0x38 4>;
+	};
+
+	tempmon_temp_grade: temp-grade@20 {
+		reg = <0x20 4>;
+	};
+};
+
+tempmon: tempmon {
+	compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
+	interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,tempmon = <&anatop>;
+	nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+	nvmem-cell-names = "calib", "temp_grade";
+	clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+};
+
+Legacy method (Deprecated):
 tempmon {
 	compatible = "fsl,imx6q-tempmon";
 	fsl,tempmon = <&anatop>;

Documentation/devicetree/bindings/usb/dwc2.txt

@@ -19,7 +19,7 @@ Required properties:
   configured in FS mode;
   - "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs
   configured in HS mode;
-  - "st,stm32f7xx-hsotg": The DWC2 USB HS controller instance in STM32F7xx SoCs
+  - "st,stm32f7-hsotg": The DWC2 USB HS controller instance in STM32F7 SoCs
     configured in HS mode;
 - reg : Should contain 1 register range (address and length)
 - interrupts : Should contain 1 interrupt

Documentation/devicetree/bindings/usb/renesas_usb3.txt

@@ -4,6 +4,7 @@ Required properties:
   - compatible: Must contain one of the following:
 	- "renesas,r8a7795-usb3-peri"
 	- "renesas,r8a7796-usb3-peri"
+	- "renesas,r8a77965-usb3-peri"
 	- "renesas,rcar-gen3-usb3-peri" for a generic R-Car Gen3 compatible
 	  device
 

Documentation/devicetree/bindings/usb/renesas_usbhs.txt

@@ -12,6 +12,7 @@ Required properties:
 	- "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device
 	- "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device
 	- "renesas,usbhs-r8a7796" for r8a7796 (R-Car M3-W) compatible device
+	- "renesas,usbhs-r8a77965" for r8a77965 (R-Car M3-N) compatible device
 	- "renesas,usbhs-r8a77995" for r8a77995 (R-Car D3) compatible device
 	- "renesas,usbhs-r7s72100" for r7s72100 (RZ/A1) compatible device
 	- "renesas,rcar-gen2-usbhs" for R-Car Gen2 or RZ/G1 compatible devices

Documentation/devicetree/bindings/usb/usb-xhci.txt

@@ -13,6 +13,7 @@ Required properties:
     - "renesas,xhci-r8a7793" for r8a7793 SoC
     - "renesas,xhci-r8a7795" for r8a7795 SoC
     - "renesas,xhci-r8a7796" for r8a7796 SoC
+    - "renesas,xhci-r8a77965" for r8a77965 SoC
     - "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 or RZ/G1 compatible
       device
     - "renesas,rcar-gen3-xhci" for a generic R-Car Gen3 compatible device

Documentation/ia64/serial.txt

@@ -111,7 +111,7 @@ TROUBLESHOOTING SERIAL CONSOLE PROBLEMS
 
 	- If you don't have an HCDP, the kernel doesn't know where
 	  your console lives until the driver discovers serial
-	  devices.  Use "console=uart, io,0x3f8" (or appropriate
+	  devices.  Use "console=uart,io,0x3f8" (or appropriate
 	  address for your machine).
 
     Kernel and init script output works fine, but no "login:" prompt:

Documentation/media/dmx.h.rst.exceptions

@@ -50,9 +50,15 @@ replace typedef dmx_filter_t :c:type:`dmx_filter`
 replace typedef dmx_pes_type_t :c:type:`dmx_pes_type`
 replace typedef dmx_input_t :c:type:`dmx_input`
 
-ignore symbol DMX_OUT_DECODER
+replace symbol DMX_BUFFER_FLAG_HAD_CRC32_DISCARD :c:type:`dmx_buffer_flags`
-ignore symbol DMX_OUT_TAP
+replace	symbol DMX_BUFFER_FLAG_TEI :c:type:`dmx_buffer_flags`
-ignore symbol DMX_OUT_TS_TAP
+replace	symbol DMX_BUFFER_PKT_COUNTER_MISMATCH :c:type:`dmx_buffer_flags`
-ignore symbol DMX_OUT_TSDEMUX_TAP
+replace	symbol DMX_BUFFER_FLAG_DISCONTINUITY_DETECTED :c:type:`dmx_buffer_flags`
+replace	symbol DMX_BUFFER_FLAG_DISCONTINUITY_INDICATOR :c:type:`dmx_buffer_flags`
+
+replace symbol DMX_OUT_DECODER :c:type:`dmx_output`
+replace symbol DMX_OUT_TAP :c:type:`dmx_output`
+replace symbol DMX_OUT_TS_TAP :c:type:`dmx_output`
+replace symbol DMX_OUT_TSDEMUX_TAP :c:type:`dmx_output`
 
 replace ioctl DMX_DQBUF dmx_qbuf

Documentation/media/uapi/dvb/dmx-qbuf.rst

@@ -51,9 +51,10 @@ out to disk. Buffers remain locked until dequeued, until the
 the device is closed.
 
 Applications call the ``DMX_DQBUF`` ioctl to dequeue a filled
-(capturing) buffer from the driver's outgoing queue. They just set the ``reserved`` field array to zero. When ``DMX_DQBUF`` is called with a
+(capturing) buffer from the driver's outgoing queue.
-pointer to this structure, the driver fills the remaining fields or
+They just set the ``index`` field withe the buffer ID to be queued.
-returns an error code.
+When ``DMX_DQBUF`` is called with a pointer to struct :c:type:`dmx_buffer`,
+the driver fills the remaining fields or returns an error code.
 
 By default ``DMX_DQBUF`` blocks when no buffer is in the outgoing
 queue. When the ``O_NONBLOCK`` flag was given to the

Documentation/sphinx/kerneldoc.py

@@ -36,8 +36,7 @@ import glob
 
 from docutils import nodes, statemachine
 from docutils.statemachine import ViewList
-from docutils.parsers.rst import directives
+from docutils.parsers.rst import directives, Directive
-from sphinx.util.compat import Directive
 from sphinx.ext.autodoc import AutodocReporter
 
 __version__  = '1.0'

Documentation/virtual/kvm/api.txt

@@ -123,14 +123,15 @@ memory layout to fit in user mode), check KVM_CAP_MIPS_VZ and use the
 flag KVM_VM_MIPS_VZ.
 
 
-4.3 KVM_GET_MSR_INDEX_LIST
+4.3 KVM_GET_MSR_INDEX_LIST, KVM_GET_MSR_FEATURE_INDEX_LIST
 
-Capability: basic
+Capability: basic, KVM_CAP_GET_MSR_FEATURES for KVM_GET_MSR_FEATURE_INDEX_LIST
 Architectures: x86
-Type: system
+Type: system ioctl
 Parameters: struct kvm_msr_list (in/out)
 Returns: 0 on success; -1 on error
 Errors:
+  EFAULT:    the msr index list cannot be read from or written to
   E2BIG:     the msr index list is to be to fit in the array specified by
              the user.
 
@@ -139,16 +140,23 @@ struct kvm_msr_list {
 	__u32 indices[0];
 };
 
-This ioctl returns the guest msrs that are supported.  The list varies
+The user fills in the size of the indices array in nmsrs, and in return
-by kvm version and host processor, but does not change otherwise.  The
+kvm adjusts nmsrs to reflect the actual number of msrs and fills in the
-user fills in the size of the indices array in nmsrs, and in return
+indices array with their numbers.
-kvm adjusts nmsrs to reflect the actual number of msrs and fills in
+
-the indices array with their numbers.
+KVM_GET_MSR_INDEX_LIST returns the guest msrs that are supported.  The list
+varies by kvm version and host processor, but does not change otherwise.
 
 Note: if kvm indicates supports MCE (KVM_CAP_MCE), then the MCE bank MSRs are
 not returned in the MSR list, as different vcpus can have a different number
 of banks, as set via the KVM_X86_SETUP_MCE ioctl.
 
+KVM_GET_MSR_FEATURE_INDEX_LIST returns the list of MSRs that can be passed
+to the KVM_GET_MSRS system ioctl.  This lets userspace probe host capabilities
+and processor features that are exposed via MSRs (e.g., VMX capabilities).
+This list also varies by kvm version and host processor, but does not change
+otherwise.
+
 
 4.4 KVM_CHECK_EXTENSION
 
@@ -475,14 +483,22 @@ Support for this has been removed.  Use KVM_SET_GUEST_DEBUG instead.
 
 4.18 KVM_GET_MSRS
 
-Capability: basic
+Capability: basic (vcpu), KVM_CAP_GET_MSR_FEATURES (system)
 Architectures: x86
-Type: vcpu ioctl
+Type: system ioctl, vcpu ioctl
 Parameters: struct kvm_msrs (in/out)
-Returns: 0 on success, -1 on error
+Returns: number of msrs successfully returned;
+        -1 on error
 
+When used as a system ioctl:
+Reads the values of MSR-based features that are available for the VM.  This
+is similar to KVM_GET_SUPPORTED_CPUID, but it returns MSR indices and values.
+The list of msr-based features can be obtained using KVM_GET_MSR_FEATURE_INDEX_LIST
+in a system ioctl.
+
+When used as a vcpu ioctl:
 Reads model-specific registers from the vcpu.  Supported msr indices can
-be obtained using KVM_GET_MSR_INDEX_LIST.
+be obtained using KVM_GET_MSR_INDEX_LIST in a system ioctl.
 
 struct kvm_msrs {
 	__u32 nmsrs; /* number of msrs in entries */

Documentation/virtual/kvm/cpuid.txt

@@ -58,6 +58,10 @@ KVM_FEATURE_PV_TLB_FLUSH           ||     9 || guest checks this feature bit
                                    ||       || before enabling paravirtualized
                                    ||       || tlb flush.
 ------------------------------------------------------------------------------
+KVM_FEATURE_ASYNC_PF_VMEXIT        ||    10 || paravirtualized async PF VM exit
+                                   ||       || can be enabled by setting bit 2
+                                   ||       || when writing to msr 0x4b564d02
+------------------------------------------------------------------------------
 KVM_FEATURE_CLOCKSOURCE_STABLE_BIT ||    24 || host will warn if no guest-side
                                    ||       || per-cpu warps are expected in
                                    ||       || kvmclock.

Documentation/virtual/kvm/msr.txt

@@ -170,7 +170,8 @@ MSR_KVM_ASYNC_PF_EN: 0x4b564d02
 	when asynchronous page faults are enabled on the vcpu 0 when
 	disabled. Bit 1 is 1 if asynchronous page faults can be injected
 	when vcpu is in cpl == 0. Bit 2 is 1 if asynchronous page faults
-	are delivered to L1 as #PF vmexits.
+	are delivered to L1 as #PF vmexits.  Bit 2 can be set only if
+	KVM_FEATURE_ASYNC_PF_VMEXIT is present in CPUID.
 
 	First 4 byte of 64 byte memory location will be written to by
 	the hypervisor at the time of asynchronous page fault (APF)

Documentation/x86/intel_rdt_ui.txt

@@ -671,7 +671,7 @@ occupancy of the real time threads on these cores.
 # mkdir p1
 
 Move the cpus 4-7 over to p1
-# echo f0 > p0/cpus
+# echo f0 > p1/cpus
 
 View the llc occupancy snapshot
 

MAINTAINERS

@@ -1238,7 +1238,7 @@ F:	drivers/clk/at91
 
 ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
 M:	Nicolas Ferre <nicolas.ferre@microchip.com>
-M:	Alexandre Belloni <alexandre.belloni@free-electrons.com>
+M:	Alexandre Belloni <alexandre.belloni@bootlin.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.linux4sam.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git
@@ -1590,7 +1590,7 @@ ARM/Marvell Dove/MV78xx0/Orion SOC support
 M:	Jason Cooper <jason@lakedaemon.net>
 M:	Andrew Lunn <andrew@lunn.ch>
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-M:	Gregory Clement <gregory.clement@free-electrons.com>
+M:	Gregory Clement <gregory.clement@bootlin.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/devicetree/bindings/soc/dove/
@@ -1604,7 +1604,7 @@ F:	arch/arm/boot/dts/orion5x*
 ARM/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K SOC support
 M:	Jason Cooper <jason@lakedaemon.net>
 M:	Andrew Lunn <andrew@lunn.ch>
-M:	Gregory Clement <gregory.clement@free-electrons.com>
+M:	Gregory Clement <gregory.clement@bootlin.com>
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
@@ -1999,8 +1999,10 @@ M:	Maxime Coquelin <mcoquelin.stm32@gmail.com>
 M:	Alexandre Torgue <alexandre.torgue@st.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git stm32-next
 N:	stm32
+F:	arch/arm/boot/dts/stm32*
+F:	arch/arm/mach-stm32/
 F:	drivers/clocksource/armv7m_systick.c
 
 ARM/TANGO ARCHITECTURE
@@ -7600,8 +7602,10 @@ F:	mm/kasan/
 F:	scripts/Makefile.kasan
 
 KCONFIG
+M:	Masahiro Yamada <yamada.masahiro@socionext.com>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git kconfig
 L:	linux-kbuild@vger.kernel.org
-S:	Orphan
+S:	Maintained
 F:	Documentation/kbuild/kconfig-language.txt
 F:	scripts/kconfig/
 
@@ -9921,6 +9925,13 @@ F:	Documentation/ABI/stable/sysfs-bus-nvmem
 F:	include/linux/nvmem-consumer.h
 F:	include/linux/nvmem-provider.h
 
+NXP SGTL5000 DRIVER
+M:	Fabio Estevam <fabio.estevam@nxp.com>
+L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/devicetree/bindings/sound/sgtl5000.txt
+F:	sound/soc/codecs/sgtl5000*
+
 NXP TDA998X DRM DRIVER
 M:	Russell King <linux@armlinux.org.uk>
 S:	Supported
@@ -10926,6 +10937,17 @@ L:	linux-gpio@vger.kernel.org
 S:	Supported
 F:	drivers/pinctrl/pinctrl-at91-pio4.*
 
+PIN CONTROLLER - FREESCALE
+M:	Dong Aisheng <aisheng.dong@nxp.com>
+M:	Fabio Estevam <festevam@gmail.com>
+M:	Shawn Guo <shawnguo@kernel.org>
+M:	Stefan Agner <stefan@agner.ch>
+R:	Pengutronix Kernel Team <kernel@pengutronix.de>
+L:	linux-gpio@vger.kernel.org
+S:	Maintained
+F:	drivers/pinctrl/freescale/
+F:	Documentation/devicetree/bindings/pinctrl/fsl,*
+
 PIN CONTROLLER - INTEL
 M:	Mika Westerberg <mika.westerberg@linux.intel.com>
 M:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
@@ -12092,6 +12114,7 @@ M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Supported
 F:	sound/soc/samsung/
+F:	Documentation/devicetree/bindings/sound/samsung*
 
 SAMSUNG EXYNOS PSEUDO RANDOM NUMBER GENERATOR (RNG) DRIVER
 M:	Krzysztof Kozlowski <krzk@kernel.org>

Makefile

@@ -2,7 +2,7 @@
 VERSION = 4
 PATCHLEVEL = 16
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc6
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*
@@ -388,7 +388,7 @@ PYTHON		= python
 CHECK		= sparse
 
 CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
-		  -Wbitwise -Wno-return-void $(CF)
+		  -Wbitwise -Wno-return-void -Wno-unknown-attribute $(CF)
 NOSTDINC_FLAGS  =
 CFLAGS_MODULE   =
 AFLAGS_MODULE   =
@@ -489,6 +489,11 @@ KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
 KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
 endif
 
+RETPOLINE_CFLAGS_GCC := -mindirect-branch=thunk-extern -mindirect-branch-register
+RETPOLINE_CFLAGS_CLANG := -mretpoline-external-thunk
+RETPOLINE_CFLAGS := $(call cc-option,$(RETPOLINE_CFLAGS_GCC),$(call cc-option,$(RETPOLINE_CFLAGS_CLANG)))
+export RETPOLINE_CFLAGS
+
 ifeq ($(config-targets),1)
 # ===========================================================================
 # *config targets only - make sure prerequisites are updated, and descend
@@ -579,10 +584,9 @@ ifeq ($(KBUILD_EXTMOD),)
 # To avoid any implicit rule to kick in, define an empty command
 $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
 
-# If .config is newer than include/config/auto.conf, someone tinkered
+# The actual configuration files used during the build are stored in
-# with it and forgot to run make oldconfig.
+# include/generated/ and include/config/. Update them if .config is newer than
-# if auto.conf.cmd is missing then we are probably in a cleaned tree so
+# include/config/auto.conf (which mirrors .config).
-# we execute the config step to be sure to catch updated Kconfig files
 include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
 	$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
 else
@@ -857,8 +861,7 @@ KBUILD_AFLAGS   += $(ARCH_AFLAGS)   $(KAFLAGS)
 KBUILD_CFLAGS   += $(ARCH_CFLAGS)   $(KCFLAGS)
 
 # Use --build-id when available.
-LDFLAGS_BUILD_ID := $(patsubst -Wl$(comma)%,%,\
+LDFLAGS_BUILD_ID := $(call ld-option, --build-id)
-			      $(call cc-ldoption, -Wl$(comma)--build-id,))
 KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
 LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
 

arch/arc/Kconfig

@@ -484,7 +484,6 @@ config ARC_CURR_IN_REG
 
 config ARC_EMUL_UNALIGNED
 	bool "Emulate unaligned memory access (userspace only)"
-	default N
 	select SYSCTL_ARCH_UNALIGN_NO_WARN
 	select SYSCTL_ARCH_UNALIGN_ALLOW
 	depends on ISA_ARCOMPACT

arch/arc/boot/dts/axs101.dts

@@ -17,6 +17,6 @@
 	compatible = "snps,axs101", "snps,arc-sdp";
 
 	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 video=1280x720@60";
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 video=1280x720@60 print-fatal-signals=1";
 	};
 };

arch/arc/boot/dts/axs10x_mb.dtsi

@@ -214,13 +214,13 @@
 			};
 
 			eeprom@0x54{
-				compatible = "24c01";
+				compatible = "atmel,24c01";
 				reg = <0x54>;
 				pagesize = <0x8>;
 			};
 
 			eeprom@0x57{
-				compatible = "24c04";
+				compatible = "atmel,24c04";
 				reg = <0x57>;
 				pagesize = <0x8>;
 			};

arch/arc/boot/dts/haps_hs_idu.dts

@@ -22,7 +22,7 @@
 	};
 
 	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 debug";
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1";
 	};
 
 	aliases {

arch/arc/boot/dts/nsim_700.dts

@@ -17,7 +17,7 @@
 	interrupt-parent = <&core_intc>;
 
 	chosen {
-		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8";
+		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1";
 	};
 
 	aliases {

arch/arc/boot/dts/nsim_hs.dts

@@ -24,7 +24,7 @@
 	};
 
 	chosen {
-		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8";
+		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1";
 	};
 
 	aliases {

arch/arc/boot/dts/nsim_hs_idu.dts

@@ -15,7 +15,7 @@
 	interrupt-parent = <&core_intc>;
 
 	chosen {
-		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8";
+		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1";
 	};
 
 	aliases {

arch/arc/boot/dts/nsimosci.dts

@@ -20,7 +20,7 @@
 		/* this is for console on PGU */
 		/* bootargs = "console=tty0 consoleblank=0"; */
 		/* this is for console on serial */
-		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24";
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24 print-fatal-signals=1";
 	};
 
 	aliases {

arch/arc/boot/dts/nsimosci_hs.dts

@@ -20,7 +20,7 @@
 		/* this is for console on PGU */
 		/* bootargs = "console=tty0 consoleblank=0"; */
 		/* this is for console on serial */
-		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24";
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24 print-fatal-signals=1";
 	};
 
 	aliases {

arch/arc/boot/dts/nsimosci_hs_idu.dts

@@ -18,7 +18,7 @@
 
 	chosen {
 		/* this is for console on serial */
-		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblan=0 debug video=640x480-24";
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblan=0 debug video=640x480-24 print-fatal-signals=1";
 	};
 
 	aliases {

arch/arc/include/asm/entry-arcv2.h

@@ -184,7 +184,7 @@
 .macro FAKE_RET_FROM_EXCPN
 	lr      r9, [status32]
 	bic     r9, r9, (STATUS_U_MASK|STATUS_DE_MASK|STATUS_AE_MASK)
-	or      r9, r9, (STATUS_L_MASK|STATUS_IE_MASK)
+	or      r9, r9, STATUS_IE_MASK
 	kflag   r9
 .endm
 

arch/arc/kernel/mcip.c

@@ -22,10 +22,79 @@ static DEFINE_RAW_SPINLOCK(mcip_lock);
 
 static char smp_cpuinfo_buf[128];
 
+/*
+ * Set mask to halt GFRC if any online core in SMP cluster is halted.
+ * Only works for ARC HS v3.0+, on earlier versions has no effect.
+ */
+static void mcip_update_gfrc_halt_mask(int cpu)
+{
+	struct bcr_generic gfrc;
+	unsigned long flags;
+	u32 gfrc_halt_mask;
+
+	READ_BCR(ARC_REG_GFRC_BUILD, gfrc);
+
+	/*
+	 * CMD_GFRC_SET_CORE and CMD_GFRC_READ_CORE commands were added in
+	 * GFRC 0x3 version.
+	 */
+	if (gfrc.ver < 0x3)
+		return;
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+
+	__mcip_cmd(CMD_GFRC_READ_CORE, 0);
+	gfrc_halt_mask = read_aux_reg(ARC_REG_MCIP_READBACK);
+	gfrc_halt_mask |= BIT(cpu);
+	__mcip_cmd_data(CMD_GFRC_SET_CORE, 0, gfrc_halt_mask);
+
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+}
+
+static void mcip_update_debug_halt_mask(int cpu)
+{
+	u32 mcip_mask = 0;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+
+	/*
+	 * mcip_mask is same for CMD_DEBUG_SET_SELECT and CMD_DEBUG_SET_MASK
+	 * commands. So read it once instead of reading both CMD_DEBUG_READ_MASK
+	 * and CMD_DEBUG_READ_SELECT.
+	 */
+	__mcip_cmd(CMD_DEBUG_READ_SELECT, 0);
+	mcip_mask = read_aux_reg(ARC_REG_MCIP_READBACK);
+
+	mcip_mask |= BIT(cpu);
+
+	__mcip_cmd_data(CMD_DEBUG_SET_SELECT, 0, mcip_mask);
+	/*
+	 * Parameter specified halt cause:
+	 * STATUS32[H]/actionpoint/breakpoint/self-halt
+	 * We choose all of them (0xF).
+	 */
+	__mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xF, mcip_mask);
+
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+}
+
 static void mcip_setup_per_cpu(int cpu)
 {
+	struct mcip_bcr mp;
+
+	READ_BCR(ARC_REG_MCIP_BCR, mp);
+
 	smp_ipi_irq_setup(cpu, IPI_IRQ);
 	smp_ipi_irq_setup(cpu, SOFTIRQ_IRQ);
+
+	/* Update GFRC halt mask as new CPU came online */
+	if (mp.gfrc)
+		mcip_update_gfrc_halt_mask(cpu);
+
+	/* Update MCIP debug mask as new CPU came online */
+	if (mp.dbg)
+		mcip_update_debug_halt_mask(cpu);
 }
 
 static void mcip_ipi_send(int cpu)
@@ -101,11 +170,6 @@ static void mcip_probe_n_setup(void)
 		IS_AVAIL1(mp.gfrc, "GFRC"));
 
 	cpuinfo_arc700[0].extn.gfrc = mp.gfrc;
-
-	if (mp.dbg) {
-		__mcip_cmd_data(CMD_DEBUG_SET_SELECT, 0, 0xf);
-		__mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xf, 0xf);
-	}
 }
 
 struct plat_smp_ops plat_smp_ops = {

arch/arc/kernel/setup.c

@@ -51,7 +51,7 @@ static const struct id_to_str arc_cpu_rel[] = {
 	{ 0x51, "R2.0" },
 	{ 0x52, "R2.1" },
 	{ 0x53, "R3.0" },
-	{ 0x54, "R4.0" },
+	{ 0x54, "R3.10a" },
 #endif
 	{ 0x00, NULL   }
 };

arch/arc/kernel/smp.c

@@ -24,6 +24,7 @@
 #include <linux/reboot.h>
 #include <linux/irqdomain.h>
 #include <linux/export.h>
+#include <linux/of_fdt.h>
 
 #include <asm/processor.h>
 #include <asm/setup.h>
@@ -47,6 +48,42 @@ void __init smp_prepare_boot_cpu(void)
 {
 }
 
+static int __init arc_get_cpu_map(const char *name, struct cpumask *cpumask)
+{
+	unsigned long dt_root = of_get_flat_dt_root();
+	const char *buf;
+
+	buf = of_get_flat_dt_prop(dt_root, name, NULL);
+	if (!buf)
+		return -EINVAL;
+
+	if (cpulist_parse(buf, cpumask))
+		return -EINVAL;
+
+	return 0;
+}
+
+/*
+ * Read from DeviceTree and setup cpu possible mask. If there is no
+ * "possible-cpus" property in DeviceTree pretend all [0..NR_CPUS-1] exist.
+ */
+static void __init arc_init_cpu_possible(void)
+{
+	struct cpumask cpumask;
+
+	if (arc_get_cpu_map("possible-cpus", &cpumask)) {
+		pr_warn("Failed to get possible-cpus from dtb, pretending all %u cpus exist\n",
+			NR_CPUS);
+
+		cpumask_setall(&cpumask);
+	}
+
+	if (!cpumask_test_cpu(0, &cpumask))
+		panic("Master cpu (cpu[0]) is missed in cpu possible mask!");
+
+	init_cpu_possible(&cpumask);
+}
+
 /*
  * Called from setup_arch() before calling setup_processor()
  *
@@ -58,10 +95,7 @@ void __init smp_prepare_boot_cpu(void)
  */
 void __init smp_init_cpus(void)
 {
-	unsigned int i;
+	arc_init_cpu_possible();
-
-	for (i = 0; i < NR_CPUS; i++)
-		set_cpu_possible(i, true);
 
 	if (plat_smp_ops.init_early_smp)
 		plat_smp_ops.init_early_smp();
@@ -70,16 +104,12 @@ void __init smp_init_cpus(void)
 /* called from init ( ) =>  process 1 */
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
-	int i;
-
 	/*
 	 * if platform didn't set the present map already, do it now
 	 * boot cpu is set to present already by init/main.c
 	 */
-	if (num_present_cpus() <= 1) {
+	if (num_present_cpus() <= 1)
-		for (i = 0; i < max_cpus; i++)
+		init_cpu_present(cpu_possible_mask);
-			set_cpu_present(i, true);
-	}
 }
 
 void __init smp_cpus_done(unsigned int max_cpus)

arch/arc/mm/cache.c

@@ -780,7 +780,10 @@ noinline static void slc_entire_op(const int op)
 
 	write_aux_reg(r, ctrl);
 
-	write_aux_reg(ARC_REG_SLC_INVALIDATE, 1);
+	if (op & OP_INV)	/* Inv or flush-n-inv use same cmd reg */
+		write_aux_reg(ARC_REG_SLC_INVALIDATE, 0x1);
+	else
+		write_aux_reg(ARC_REG_SLC_FLUSH, 0x1);
 
 	/* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */
 	read_aux_reg(r);

arch/arm/boot/dts/bcm11351.dtsi

@@ -55,7 +55,7 @@
 		      <0x3ff00100 0x100>;
 	};
 
-	smc@0x3404c000 {
+	smc@3404c000 {
 		compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
 		reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
 	};

arch/arm/boot/dts/bcm21664.dtsi

@@ -55,7 +55,7 @@
 		      <0x3ff00100 0x100>;
 	};
 
-	smc@0x3404e000 {
+	smc@3404e000 {
 		compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
 		reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
 	};

arch/arm/boot/dts/bcm2835.dtsi

@@ -18,11 +18,11 @@
 	soc {
 		ranges = <0x7e000000 0x20000000 0x02000000>;
 		dma-ranges = <0x40000000 0x00000000 0x20000000>;
+	};
 
 	arm-pmu {
 		compatible = "arm,arm1176-pmu";
 	};
-	};
 };
 
 &cpu_thermal {

arch/arm/boot/dts/bcm2836.dtsi

@@ -9,20 +9,20 @@
 			 <0x40000000 0x40000000 0x00001000>;
 		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
 
-		local_intc: local_intc {
+		local_intc: local_intc@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			interrupt-parent = <&local_intc>;
 		};
+	};
 
 	arm-pmu {
 		compatible = "arm,cortex-a7-pmu";
 		interrupt-parent = <&local_intc>;
 		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
 	};
-	};
 
 	timer {
 		compatible = "arm,armv7-timer";

arch/arm/boot/dts/bcm2837.dtsi

@@ -8,7 +8,7 @@
 			 <0x40000000 0x40000000 0x00001000>;
 		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
 
-		local_intc: local_intc {
+		local_intc: local_intc@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 			interrupt-controller;

arch/arm/boot/dts/bcm283x.dtsi

@@ -465,7 +465,7 @@
 			status = "disabled";
 		};
 
-		aux: aux@0x7e215000 {
+		aux: aux@7e215000 {
 			compatible = "brcm,bcm2835-aux";
 			#clock-cells = <1>;
 			reg = <0x7e215000 0x8>;

arch/arm/boot/dts/bcm958625hr.dts

@@ -49,7 +49,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x60000000 0x80000000>;
+		reg = <0x60000000 0x20000000>;
 	};
 
 	gpio-restart {

arch/arm/boot/dts/gemini-dlink-dns-313.dts

@@ -269,7 +269,7 @@
 
 		sata: sata@46000000 {
 			/* The ROM uses this muxmode */
-			cortina,gemini-ata-muxmode = <3>;
+			cortina,gemini-ata-muxmode = <0>;
 			cortina,gemini-enable-sata-bridge;
 			status = "okay";
 		};

arch/arm/boot/dts/imx6dl-icore-rqs.dts

@@ -42,7 +42,7 @@
 
 /dts-v1/;
 
-#include "imx6q.dtsi"
+#include "imx6dl.dtsi"
 #include "imx6qdl-icore-rqs.dtsi"
 
 / {

arch/arm/boot/dts/logicpd-som-lv.dtsi

@@ -71,6 +71,8 @@
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <2600000>;
 
 	twl: twl@48 {
@@ -189,7 +191,12 @@
 		>;
 	};
 
-
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)        /* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)        /* i2c1_sda.i2c1_sda */
+		>;
+	};
 };
 
 &omap3_pmx_wkup {

arch/arm/boot/dts/logicpd-torpedo-som.dtsi

@@ -66,6 +66,8 @@
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <2600000>;
 
 	twl: twl@48 {
@@ -136,6 +138,12 @@
 			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
 		>;
 	};
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)        /* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)        /* i2c1_sda.i2c1_sda */
+		>;
+	};
 };
 
 &uart2 {

arch/arm/boot/dts/omap5-uevm.dts

@@ -47,7 +47,7 @@
 			gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;	/* gpio3_83 */
 			wakeup-source;
 			autorepeat;
-			debounce_interval = <50>;
+			debounce-interval = <50>;
 		};
 	};
 

arch/arm/boot/dts/rk3036.dtsi

@@ -280,7 +280,7 @@
 		max-frequency = <37500000>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		resets = <&cru SRST_SDIO>;
@@ -298,7 +298,7 @@
 		max-frequency = <37500000>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		default-sample-phase = <158>;
 		disable-wp;
 		dmas = <&pdma 12>;

arch/arm/boot/dts/rk322x.dtsi

@@ -621,7 +621,7 @@
 		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
@@ -634,7 +634,7 @@
 		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
@@ -649,7 +649,7 @@
 		max-frequency = <37500000>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		bus-width = <8>;
 		default-sample-phase = <158>;
 		fifo-depth = <0x100>;

arch/arm/boot/dts/rk3288-phycore-som.dtsi

@@ -110,26 +110,6 @@
 	};
 };
 
-&cpu0 {
-	cpu0-supply = <&vdd_cpu>;
-	operating-points = <
-		/* KHz    uV */
-		1800000	1400000
-		1608000	1350000
-		1512000 1300000
-		1416000 1200000
-		1200000 1100000
-		1008000 1050000
-		 816000 1000000
-		 696000  950000
-		 600000  900000
-		 408000  900000
-		 312000  900000
-		 216000  900000
-		 126000  900000
-	>;
-};
-
 &emmc {
 	status = "okay";
 	bus-width = <8>;

arch/arm/boot/dts/zx296702.dtsi

@@ -56,7 +56,7 @@
 			clocks = <&topclk ZX296702_A9_PERIPHCLK>;
 		};
 
-		l2cc: l2-cache-controller@0x00c00000 {
+		l2cc: l2-cache-controller@c00000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00c00000 0x1000>;
 			cache-unified;
@@ -67,30 +67,30 @@
 			arm,double-linefill-incr = <0>;
 		};
 
-		pcu: pcu@0xa0008000 {
+		pcu: pcu@a0008000 {
 			compatible = "zte,zx296702-pcu";
 			reg = <0xa0008000 0x1000>;
 		};
 
-		topclk: topclk@0x09800000 {
+		topclk: topclk@9800000 {
 			compatible = "zte,zx296702-topcrm-clk";
 			reg = <0x09800000 0x1000>;
 			#clock-cells = <1>;
 		};
 
-		lsp1clk: lsp1clk@0x09400000 {
+		lsp1clk: lsp1clk@9400000 {
 			compatible = "zte,zx296702-lsp1crpm-clk";
 			reg = <0x09400000 0x1000>;
 			#clock-cells = <1>;
 		};
 
-		lsp0clk: lsp0clk@0x0b000000 {
+		lsp0clk: lsp0clk@b000000 {
 			compatible = "zte,zx296702-lsp0crpm-clk";
 			reg = <0x0b000000 0x1000>;
 			#clock-cells = <1>;
 		};
 
-		uart0: serial@0x09405000 {
+		uart0: serial@9405000 {
 			compatible = "zte,zx296702-uart";
 			reg = <0x09405000 0x1000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
@@ -98,7 +98,7 @@
 			status = "disabled";
 		};
 
-		uart1: serial@0x09406000 {
+		uart1: serial@9406000 {
 			compatible = "zte,zx296702-uart";
 			reg = <0x09406000 0x1000>;
 			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -106,7 +106,7 @@
 			status = "disabled";
 		};
 
-		mmc0: mmc@0x09408000 {
+		mmc0: mmc@9408000 {
 			compatible = "snps,dw-mshc";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -119,7 +119,7 @@
 			status = "disabled";
 		};
 
-		mmc1: mmc@0x0b003000 {
+		mmc1: mmc@b003000 {
 			compatible = "snps,dw-mshc";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -132,7 +132,7 @@
 			status = "disabled";
 		};
 
-		sysctrl: sysctrl@0xa0007000 {
+		sysctrl: sysctrl@a0007000 {
 			compatible = "zte,sysctrl", "syscon";
 			reg = <0xa0007000 0x1000>;
 		};

arch/arm/configs/omap2plus_defconfig

@@ -319,7 +319,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_RC_CORE=m
 CONFIG_MEDIA_CONTROLLER=y
 CONFIG_VIDEO_V4L2_SUBDEV_API=y
-CONFIG_LIRC=m
+CONFIG_LIRC=y
 CONFIG_RC_DEVICES=y
 CONFIG_IR_RX51=m
 CONFIG_V4L_PLATFORM_DRIVERS=y

arch/arm/kvm/hyp/Makefile

@@ -7,6 +7,8 @@ ccflags-y += -fno-stack-protector -DDISABLE_BRANCH_PROFILING
 
 KVM=../../../../virt/kvm
 
+CFLAGS_ARMV7VE		   :=$(call cc-option, -march=armv7ve)
+
 obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v2-sr.o
 obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v3-sr.o
 obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/timer-sr.o
@@ -15,7 +17,10 @@ obj-$(CONFIG_KVM_ARM_HOST) += tlb.o
 obj-$(CONFIG_KVM_ARM_HOST) += cp15-sr.o
 obj-$(CONFIG_KVM_ARM_HOST) += vfp.o
 obj-$(CONFIG_KVM_ARM_HOST) += banked-sr.o
+CFLAGS_banked-sr.o	   += $(CFLAGS_ARMV7VE)
+
 obj-$(CONFIG_KVM_ARM_HOST) += entry.o
 obj-$(CONFIG_KVM_ARM_HOST) += hyp-entry.o
 obj-$(CONFIG_KVM_ARM_HOST) += switch.o
+CFLAGS_switch.o		   += $(CFLAGS_ARMV7VE)
 obj-$(CONFIG_KVM_ARM_HOST) += s2-setup.o

arch/arm/kvm/hyp/banked-sr.c

@@ -20,6 +20,10 @@
 
 #include <asm/kvm_hyp.h>
 
+/*
+ * gcc before 4.9 doesn't understand -march=armv7ve, so we have to
+ * trick the assembler.
+ */
 __asm__(".arch_extension     virt");
 
 void __hyp_text __banked_save_state(struct kvm_cpu_context *ctxt)

arch/arm/mach-clps711x/board-dt.c

@@ -69,7 +69,7 @@ static void clps711x_restart(enum reboot_mode mode, const char *cmd)
 	soft_restart(0);
 }
 
-static const char *clps711x_compat[] __initconst = {
+static const char *const clps711x_compat[] __initconst = {
 	"cirrus,ep7209",
 	NULL
 };

arch/arm/mach-davinci/board-dm355-evm.c

@@ -368,7 +368,7 @@ static struct spi_eeprom at25640a = {
 	.flags		= EE_ADDR2,
 };
 
-static struct spi_board_info dm355_evm_spi_info[] __initconst = {
+static const struct spi_board_info dm355_evm_spi_info[] __initconst = {
 	{
 		.modalias	= "at25",
 		.platform_data	= &at25640a,

arch/arm/mach-davinci/board-dm355-leopard.c

@@ -217,7 +217,7 @@ static struct spi_eeprom at25640a = {
 	.flags		= EE_ADDR2,
 };
 
-static struct spi_board_info dm355_leopard_spi_info[] __initconst = {
+static const struct spi_board_info dm355_leopard_spi_info[] __initconst = {
 	{
 		.modalias	= "at25",
 		.platform_data	= &at25640a,

arch/arm/mach-davinci/board-dm365-evm.c

@@ -726,7 +726,7 @@ static struct spi_eeprom at25640 = {
 	.flags		= EE_ADDR2,
 };
 
-static struct spi_board_info dm365_evm_spi_info[] __initconst = {
+static const struct spi_board_info dm365_evm_spi_info[] __initconst = {
 	{
 		.modalias	= "at25",
 		.platform_data	= &at25640,

arch/arm/mach-mvebu/Kconfig

@@ -41,7 +41,7 @@ config MACH_ARMADA_375
 	depends on ARCH_MULTI_V7
 	select ARMADA_370_XP_IRQ
 	select ARM_ERRATA_720789
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select ARM_GIC
 	select ARMADA_375_CLK
 	select HAVE_ARM_SCU
@@ -57,7 +57,7 @@ config MACH_ARMADA_38X
 	bool "Marvell Armada 380/385 boards"
 	depends on ARCH_MULTI_V7
 	select ARM_ERRATA_720789
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select ARM_GIC
 	select ARM_GLOBAL_TIMER
 	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK

arch/arm/mach-omap1/clock.c

@@ -1011,17 +1011,17 @@ static int clk_debugfs_register_one(struct clk *c)
 		return -ENOMEM;
 	c->dent = d;
 
-	d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
+	d = debugfs_create_u8("usecount", S_IRUGO, c->dent, &c->usecount);
 	if (!d) {
 		err = -ENOMEM;
 		goto err_out;
 	}
-	d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+	d = debugfs_create_ulong("rate", S_IRUGO, c->dent, &c->rate);
 	if (!d) {
 		err = -ENOMEM;
 		goto err_out;
 	}
-	d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+	d = debugfs_create_x8("flags", S_IRUGO, c->dent, &c->flags);
 	if (!d) {
 		err = -ENOMEM;
 		goto err_out;

arch/arm/mach-omap2/omap-wakeupgen.c

@@ -299,8 +299,6 @@ static void irq_save_context(void)
 	if (soc_is_dra7xx())
 		return;
 
-	if (!sar_base)
-		sar_base = omap4_get_sar_ram_base();
 	if (wakeupgen_ops && wakeupgen_ops->save_context)
 		wakeupgen_ops->save_context();
 }
@@ -598,6 +596,8 @@ static int __init wakeupgen_init(struct device_node *node,
 	irq_hotplug_init();
 	irq_pm_init();
 
+	sar_base = omap4_get_sar_ram_base();
+
 	return 0;
 }
 IRQCHIP_DECLARE(ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init);

arch/arm/mach-omap2/omap_hwmod.c

@@ -977,6 +977,9 @@ static int _enable_clocks(struct omap_hwmod *oh)
 
 	pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name);
 
+	if (oh->flags & HWMOD_OPT_CLKS_NEEDED)
+		_enable_optional_clocks(oh);
+
 	if (oh->_clk)
 		clk_enable(oh->_clk);
 
@@ -985,9 +988,6 @@ static int _enable_clocks(struct omap_hwmod *oh)
 			clk_enable(os->_clk);
 	}
 
-	if (oh->flags & HWMOD_OPT_CLKS_NEEDED)
-		_enable_optional_clocks(oh);
-
 	/* The opt clocks are controlled by the device driver. */
 
 	return 0;

arch/arm/mach-omap2/pm.c

@@ -186,7 +186,7 @@ static void omap_pm_end(void)
 	cpu_idle_poll_ctrl(false);
 }
 
-static void omap_pm_finish(void)
+static void omap_pm_wake(void)
 {
 	if (soc_is_omap34xx())
 		omap_prcm_irq_complete();
@@ -196,7 +196,7 @@ static const struct platform_suspend_ops omap_pm_ops = {
 	.begin		= omap_pm_begin,
 	.end		= omap_pm_end,
 	.enter		= omap_pm_enter,
-	.finish		= omap_pm_finish,
+	.wake		= omap_pm_wake,
 	.valid		= suspend_valid_only_mem,
 };
 

arch/arm/mach-omap2/timer.c

@@ -156,12 +156,6 @@ static struct clock_event_device clockevent_gpt = {
 	.tick_resume		= omap2_gp_timer_shutdown,
 };
 
-static struct property device_disabled = {
-	.name = "status",
-	.length = sizeof("disabled"),
-	.value = "disabled",
-};
-
 static const struct of_device_id omap_timer_match[] __initconst = {
 	{ .compatible = "ti,omap2420-timer", },
 	{ .compatible = "ti,omap3430-timer", },
@@ -203,8 +197,17 @@ static struct device_node * __init omap_get_timer_dt(const struct of_device_id *
 				  of_get_property(np, "ti,timer-secure", NULL)))
 			continue;
 
-		if (!of_device_is_compatible(np, "ti,omap-counter32k"))
+		if (!of_device_is_compatible(np, "ti,omap-counter32k")) {
-			of_add_property(np, &device_disabled);
+			struct property *prop;
+
+			prop = kzalloc(sizeof(*prop), GFP_KERNEL);
+			if (!prop)
+				return NULL;
+			prop->name = "status";
+			prop->value = "disabled";
+			prop->length = strlen(prop->value);
+			of_add_property(np, prop);
+		}
 		return np;
 	}
 

arch/arm/mach-orion5x/Kconfig

@@ -58,7 +58,6 @@ config MACH_KUROBOX_PRO
 
 config MACH_DNS323
 	bool "D-Link DNS-323"
-	select GENERIC_NET_UTILS
 	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
@@ -66,7 +65,6 @@ config MACH_DNS323
 
 config MACH_TS209
 	bool "QNAP TS-109/TS-209"
-	select GENERIC_NET_UTILS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-109/TS-209 platform.
@@ -101,7 +99,6 @@ config MACH_LINKSTATION_LS_HGL
 
 config MACH_TS409
 	bool "QNAP TS-409"
-	select GENERIC_NET_UTILS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-409 platform.

arch/arm/mach-orion5x/dns323-setup.c

@@ -173,10 +173,42 @@ static struct mv643xx_eth_platform_data dns323_eth_data = {
 	.phy_addr = MV643XX_ETH_PHY_ADDR(8),
 };
 
+/* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these
+ * functions be kept somewhere?
+ */
+static int __init dns323_parse_hex_nibble(char n)
+{
+	if (n >= '0' && n <= '9')
+		return n - '0';
+
+	if (n >= 'A' && n <= 'F')
+		return n - 'A' + 10;
+
+	if (n >= 'a' && n <= 'f')
+		return n - 'a' + 10;
+
+	return -1;
+}
+
+static int __init dns323_parse_hex_byte(const char *b)
+{
+	int hi;
+	int lo;
+
+	hi = dns323_parse_hex_nibble(b[0]);
+	lo = dns323_parse_hex_nibble(b[1]);
+
+	if (hi < 0 || lo < 0)
+		return -1;
+
+	return (hi << 4) | lo;
+}
+
 static int __init dns323_read_mac_addr(void)
 {
 	u_int8_t addr[6];
-	void __iomem *mac_page;
+	int i;
+	char *mac_page;
 
 	/* MAC address is stored as a regular ol' string in /dev/mtdblock4
 	 * (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80).
@@ -185,8 +217,23 @@ static int __init dns323_read_mac_addr(void)
 	if (!mac_page)
 		return -ENOMEM;
 
-	if (!mac_pton((__force const char *) mac_page, addr))
+	/* Sanity check the string we're looking at */
+	for (i = 0; i < 5; i++) {
+		if (*(mac_page + (i * 3) + 2) != ':') {
 			goto error_fail;
+		}
+	}
+
+	for (i = 0; i < 6; i++)	{
+		int byte;
+
+		byte = dns323_parse_hex_byte(mac_page + (i * 3));
+		if (byte < 0) {
+			goto error_fail;
+		}
+
+		addr[i] = byte;
+	}
 
 	iounmap(mac_page);
 	printk("DNS-323: Found ethernet MAC address: %pM\n", addr);

arch/arm/mach-orion5x/tsx09-common.c

@@ -53,13 +53,54 @@ struct mv643xx_eth_platform_data qnap_tsx09_eth_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
+static int __init qnap_tsx09_parse_hex_nibble(char n)
+{
+	if (n >= '0' && n <= '9')
+		return n - '0';
+
+	if (n >= 'A' && n <= 'F')
+		return n - 'A' + 10;
+
+	if (n >= 'a' && n <= 'f')
+		return n - 'a' + 10;
+
+	return -1;
+}
+
+static int __init qnap_tsx09_parse_hex_byte(const char *b)
+{
+	int hi;
+	int lo;
+
+	hi = qnap_tsx09_parse_hex_nibble(b[0]);
+	lo = qnap_tsx09_parse_hex_nibble(b[1]);
+
+	if (hi < 0 || lo < 0)
+		return -1;
+
+	return (hi << 4) | lo;
+}
+
 static int __init qnap_tsx09_check_mac_addr(const char *addr_str)
 {
 	u_int8_t addr[6];
+	int i;
 
-	if (!mac_pton(addr_str, addr))
+	for (i = 0; i < 6; i++) {
+		int byte;
+
+		/*
+		 * Enforce "xx:xx:xx:xx:xx:xx\n" format.
+		 */
+		if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
 			return -1;
 
+		byte = qnap_tsx09_parse_hex_byte(addr_str + (i * 3));
+		if (byte < 0)
+			return -1;
+		addr[i] = byte;
+	}
+
 	printk(KERN_INFO "tsx09: found ethernet mac address %pM\n", addr);
 
 	memcpy(qnap_tsx09_eth_data.mac_addr, addr, 6);
@@ -77,12 +118,12 @@ void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size)
 	unsigned long addr;
 
 	for (addr = mem_base; addr < (mem_base + size); addr += 1024) {
-		void __iomem *nor_page;
+		char *nor_page;
 		int ret = 0;
 
 		nor_page = ioremap(addr, 1024);
 		if (nor_page != NULL) {
-			ret = qnap_tsx09_check_mac_addr((__force const char *)nor_page);
+			ret = qnap_tsx09_check_mac_addr(nor_page);
 			iounmap(nor_page);
 		}
 

arch/arm/plat-orion/common.c

@@ -472,28 +472,27 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 /*****************************************************************************
  * Ethernet switch
  ****************************************************************************/
-static __initconst const char *orion_ge00_mvmdio_bus_name = "orion-mii";
+static __initdata struct mdio_board_info orion_ge00_switch_board_info = {
-static __initdata struct mdio_board_info
+	.bus_id   = "orion-mii",
-		  orion_ge00_switch_board_info;
+	.modalias = "mv88e6085",
+};
 
 void __init orion_ge00_switch_init(struct dsa_chip_data *d)
 {
-	struct mdio_board_info *bd;
 	unsigned int i;
 
 	if (!IS_BUILTIN(CONFIG_PHYLIB))
 		return;
 
-	for (i = 0; i < ARRAY_SIZE(d->port_names); i++)
+	for (i = 0; i < ARRAY_SIZE(d->port_names); i++) {
-		if (!strcmp(d->port_names[i], "cpu"))
+		if (!strcmp(d->port_names[i], "cpu")) {
-			break;
-
-	bd = &orion_ge00_switch_board_info;
-	bd->bus_id = orion_ge00_mvmdio_bus_name;
-	bd->mdio_addr = d->sw_addr;
 			d->netdev[i] = &orion_ge00.dev;
-	strcpy(bd->modalias, "mv88e6085");
+			break;
-	bd->platform_data = d;
+		}
+	}
+
+	orion_ge00_switch_board_info.mdio_addr = d->sw_addr;
+	orion_ge00_switch_board_info.platform_data = d;
 
 	mdiobus_register_board_info(&orion_ge00_switch_board_info, 1);
 }

arch/arm64/boot/dts/amlogic/meson-axg.dtsi

@@ -165,14 +165,14 @@
 
 			uart_A: serial@24000 {
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
-				reg = <0x0 0x24000 0x0 0x14>;
+				reg = <0x0 0x24000 0x0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 
 			uart_B: serial@23000 {
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
-				reg = <0x0 0x23000 0x0 0x14>;
+				reg = <0x0 0x23000 0x0 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};

arch/arm64/boot/dts/amlogic/meson-gx.dtsi

@@ -235,14 +235,14 @@
 
 			uart_A: serial@84c0 {
 				compatible = "amlogic,meson-gx-uart";
-				reg = <0x0 0x84c0 0x0 0x14>;
+				reg = <0x0 0x84c0 0x0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 
 			uart_B: serial@84dc {
 				compatible = "amlogic,meson-gx-uart";
-				reg = <0x0 0x84dc 0x0 0x14>;
+				reg = <0x0 0x84dc 0x0 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
@@ -287,7 +287,7 @@
 
 			uart_C: serial@8700 {
 				compatible = "amlogic,meson-gx-uart";
-				reg = <0x0 0x8700 0x0 0x14>;
+				reg = <0x0 0x8700 0x0 0x18>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
@@ -404,14 +404,14 @@
 
 			uart_AO: serial@4c0 {
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
-				reg = <0x0 0x004c0 0x0 0x14>;
+				reg = <0x0 0x004c0 0x0 0x18>;
 				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 
 			uart_AO_B: serial@4e0 {
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
-				reg = <0x0 0x004e0 0x0 0x14>;
+				reg = <0x0 0x004e0 0x0 0x18>;
 				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};

arch/arm64/boot/dts/amlogic/meson-gxl.dtsi

@@ -631,6 +631,7 @@
 
 			internal_phy: ethernet-phy@8 {
 				compatible = "ethernet-phy-id0181.4400", "ethernet-phy-ieee802.3-c22";
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <8>;
 				max-speed = <100>;
 			};

arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi

@@ -98,7 +98,7 @@
 		clock-output-names = "clk125mhz";
 	};
 
-	pci {
+	pcie@30000000 {
 		compatible = "pci-host-ecam-generic";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -118,6 +118,7 @@
 		ranges =
 		  <0x02000000    0 0x40000000    0 0x40000000    0 0x20000000
 		   0x43000000 0x40 0x00000000 0x40 0x00000000 0x20 0x00000000>;
+		bus-range = <0 0xff>;
 		interrupt-map-mask = <0 0 0 7>;
 		interrupt-map =
 		      /* addr  pin  ic   icaddr  icintr */

arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts

@@ -51,7 +51,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		ramoops@0x21f00000 {
+		ramoops@21f00000 {
 			compatible = "ramoops";
 			reg = <0x0 0x21f00000 0x0 0x00100000>;
 			record-size	= <0x00020000>;

arch/arm64/boot/dts/mediatek/mt8173.dtsi

@@ -341,7 +341,7 @@
 			reg = <0 0x10005000 0 0x1000>;
 		};
 
-		pio: pinctrl@0x10005000 {
+		pio: pinctrl@10005000 {
 			compatible = "mediatek,mt8173-pinctrl";
 			reg = <0 0x1000b000 0 0x1000>;
 			mediatek,pctl-regmap = <&syscfg_pctl_a>;

arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi

@@ -140,16 +140,16 @@
 		};
 
 		agnoc@0 {
-			qcom,pcie@00600000 {
+			qcom,pcie@600000 {
 				perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
 			};
 
-			qcom,pcie@00608000 {
+			qcom,pcie@608000 {
 				status = "okay";
 				perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
 			};
 
-			qcom,pcie@00610000 {
+			qcom,pcie@610000 {
 				status = "okay";
 				perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
 			};

arch/arm64/boot/dts/qcom/msm8996.dtsi

@@ -840,7 +840,7 @@
 			#size-cells = <1>;
 			ranges;
 
-			pcie0: qcom,pcie@00600000 {
+			pcie0: qcom,pcie@600000 {
 				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
 				status = "disabled";
 				power-domains = <&gcc PCIE0_GDSC>;
@@ -893,7 +893,7 @@
 
 			};
 
-			pcie1: qcom,pcie@00608000 {
+			pcie1: qcom,pcie@608000 {
 				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
 				power-domains = <&gcc PCIE1_GDSC>;
 				bus-range = <0x00 0xff>;
@@ -946,7 +946,7 @@
 						"bus_slave";
 			};
 
-			pcie2: qcom,pcie@00610000 {
+			pcie2: qcom,pcie@610000 {
 				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
 				power-domains = <&gcc PCIE2_GDSC>;
 				bus-range = <0x00 0xff>;

arch/arm64/boot/dts/rockchip/rk3328-rock64.dts

@@ -132,17 +132,16 @@
 	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
 	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
 	clock_in_out = "input";
-	/* shows instability at 1GBit right now */
-	max-speed = <100>;
 	phy-supply = <&vcc_io>;
 	phy-mode = "rgmii";
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmiim1_pins>;
+	snps,force_thresh_dma_mode;
 	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x26>;
+	tx_delay = <0x24>;
-	rx_delay = <0x11>;
+	rx_delay = <0x18>;
 	status = "okay";
 };
 

arch/arm64/boot/dts/rockchip/rk3328.dtsi

@@ -730,7 +730,7 @@
 		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		status = "disabled";
 	};
@@ -741,7 +741,7 @@
 		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		status = "disabled";
 	};
@@ -752,7 +752,7 @@
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		status = "disabled";
 	};

arch/arm64/boot/dts/rockchip/rk3368.dtsi

@@ -257,7 +257,7 @@
 		max-frequency = <150000000>;
 		clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
 			 <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 		resets = <&cru SRST_SDIO0>;

arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi

@@ -457,7 +457,7 @@
 	assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
 	assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
 	assigned-clock-rates = <100000000>;
-	ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
+	ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_clkreqn_cpm>;

arch/arm64/boot/dts/rockchip/rk3399.dtsi

@@ -1739,8 +1739,8 @@
 		compatible = "rockchip,rk3399-edp";
 		reg = <0x0 0xff970000 0x0 0x8000>;
 		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>;
+		clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>, <&cru PCLK_VIO_GRF>;
-		clock-names = "dp", "pclk";
+		clock-names = "dp", "pclk", "grf";
 		pinctrl-names = "default";
 		pinctrl-0 = <&edp_hpd>;
 		power-domains = <&power RK3399_PD_EDP>;

arch/arm64/kernel/cpu_errata.c

@@ -178,7 +178,7 @@ static int enable_smccc_arch_workaround_1(void *data)
 	case PSCI_CONDUIT_HVC:
 		arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
 				  ARM_SMCCC_ARCH_WORKAROUND_1, &res);
-		if (res.a0)
+		if ((int)res.a0 < 0)
 			return 0;
 		cb = call_hvc_arch_workaround_1;
 		smccc_start = __smccc_workaround_1_hvc_start;
@@ -188,7 +188,7 @@ static int enable_smccc_arch_workaround_1(void *data)
 	case PSCI_CONDUIT_SMC:
 		arm_smccc_1_1_smc(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
 				  ARM_SMCCC_ARCH_WORKAROUND_1, &res);
-		if (res.a0)
+		if ((int)res.a0 < 0)
 			return 0;
 		cb = call_smc_arch_workaround_1;
 		smccc_start = __smccc_workaround_1_smc_start;

arch/arm64/kvm/guest.c

@@ -363,8 +363,6 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 {
 	int ret = 0;
 
-	vcpu_load(vcpu);
-
 	trace_kvm_set_guest_debug(vcpu, dbg->control);
 
 	if (dbg->control & ~KVM_GUESTDBG_VALID_MASK) {
@@ -386,7 +384,6 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 	}
 
 out:
-	vcpu_put(vcpu);
 	return ret;
 }
 

arch/arm64/mm/mmu.c

@@ -108,7 +108,7 @@ static bool pgattr_change_is_safe(u64 old, u64 new)
 	 * The following mapping attributes may be updated in live
 	 * kernel mappings without the need for break-before-make.
 	 */
-	static const pteval_t mask = PTE_PXN | PTE_RDONLY | PTE_WRITE;
+	static const pteval_t mask = PTE_PXN | PTE_RDONLY | PTE_WRITE | PTE_NG;
 
 	/* creating or taking down mappings is always safe */
 	if (old == 0 || new == 0)
@@ -118,9 +118,9 @@ static bool pgattr_change_is_safe(u64 old, u64 new)
 	if ((old | new) & PTE_CONT)
 		return false;
 
-	/* Transitioning from Global to Non-Global is safe */
+	/* Transitioning from Non-Global to Global is unsafe */
-	if (((old ^ new) == PTE_NG) && (new & PTE_NG))
+	if (old & ~new & PTE_NG)
-		return true;
+		return false;
 
 	return ((old ^ new) & ~mask) == 0;
 }

arch/ia64/include/asm/atomic.h

@@ -66,38 +66,35 @@ ATOMIC_OPS(add, +)
 ATOMIC_OPS(sub, -)
 
 #ifdef __OPTIMIZE__
-#define __ia64_atomic_const(i)	__builtin_constant_p(i) ?		\
+#define __ia64_atomic_const(i)						\
+	static const int __ia64_atomic_p = __builtin_constant_p(i) ?	\
 		((i) == 1 || (i) == 4 || (i) == 8 || (i) == 16 ||	\
-		 (i) == -1 || (i) == -4 || (i) == -8 || (i) == -16) : 0
+		 (i) == -1 || (i) == -4 || (i) == -8 || (i) == -16) : 0;\
-
+	__ia64_atomic_p
-#define atomic_add_return(i, v)						\
-({									\
-	int __i = (i);							\
-	static const int __ia64_atomic_p = __ia64_atomic_const(i);	\
-	__ia64_atomic_p ? ia64_fetch_and_add(__i, &(v)->counter) :	\
-				ia64_atomic_add(__i, v);		\
-})
-
-#define atomic_sub_return(i, v)						\
-({									\
-	int __i = (i);							\
-	static const int __ia64_atomic_p = __ia64_atomic_const(i);	\
-	__ia64_atomic_p ? ia64_fetch_and_add(-__i, &(v)->counter) :	\
-				ia64_atomic_sub(__i, v);		\
-})
 #else
-#define atomic_add_return(i, v)	ia64_atomic_add(i, v)
+#define __ia64_atomic_const(i)	0
-#define atomic_sub_return(i, v)	ia64_atomic_sub(i, v)
 #endif
 
+#define atomic_add_return(i,v)						\
+({									\
+	int __ia64_aar_i = (i);						\
+	__ia64_atomic_const(i)						\
+		? ia64_fetch_and_add(__ia64_aar_i, &(v)->counter)	\
+		: ia64_atomic_add(__ia64_aar_i, v);			\
+})
+
+#define atomic_sub_return(i,v)						\
+({									\
+	int __ia64_asr_i = (i);						\
+	__ia64_atomic_const(i)						\
+		? ia64_fetch_and_add(-__ia64_asr_i, &(v)->counter)	\
+		: ia64_atomic_sub(__ia64_asr_i, v);			\
+})
+
 #define atomic_fetch_add(i,v)						\
 ({									\
 	int __ia64_aar_i = (i);						\
-	(__builtin_constant_p(i)					\
+	__ia64_atomic_const(i)						\
-	 && (   (__ia64_aar_i ==  1) || (__ia64_aar_i ==   4)		\
-	     || (__ia64_aar_i ==  8) || (__ia64_aar_i ==  16)		\
-	     || (__ia64_aar_i == -1) || (__ia64_aar_i ==  -4)		\
-	     || (__ia64_aar_i == -8) || (__ia64_aar_i == -16)))		\
 		? ia64_fetchadd(__ia64_aar_i, &(v)->counter, acq)	\
 		: ia64_atomic_fetch_add(__ia64_aar_i, v);		\
 })
@@ -105,11 +102,7 @@ ATOMIC_OPS(sub, -)
 #define atomic_fetch_sub(i,v)						\
 ({									\
 	int __ia64_asr_i = (i);						\
-	(__builtin_constant_p(i)					\
+	__ia64_atomic_const(i)						\
-	 && (   (__ia64_asr_i ==   1) || (__ia64_asr_i ==   4)		\
-	     || (__ia64_asr_i ==   8) || (__ia64_asr_i ==  16)		\
-	     || (__ia64_asr_i ==  -1) || (__ia64_asr_i ==  -4)		\
-	     || (__ia64_asr_i ==  -8) || (__ia64_asr_i == -16)))	\
 		? ia64_fetchadd(-__ia64_asr_i, &(v)->counter, acq)	\
 		: ia64_atomic_fetch_sub(__ia64_asr_i, v);		\
 })
@@ -170,11 +163,7 @@ ATOMIC64_OPS(sub, -)
 #define atomic64_add_return(i,v)					\
 ({									\
 	long __ia64_aar_i = (i);					\
-	(__builtin_constant_p(i)					\
+	__ia64_atomic_const(i)						\
-	 && (   (__ia64_aar_i ==  1) || (__ia64_aar_i ==   4)		\
-	     || (__ia64_aar_i ==  8) || (__ia64_aar_i ==  16)		\
-	     || (__ia64_aar_i == -1) || (__ia64_aar_i ==  -4)		\
-	     || (__ia64_aar_i == -8) || (__ia64_aar_i == -16)))		\
 		? ia64_fetch_and_add(__ia64_aar_i, &(v)->counter)	\
 		: ia64_atomic64_add(__ia64_aar_i, v);			\
 })
@@ -182,11 +171,7 @@ ATOMIC64_OPS(sub, -)
 #define atomic64_sub_return(i,v)					\
 ({									\
 	long __ia64_asr_i = (i);					\
-	(__builtin_constant_p(i)					\
+	__ia64_atomic_const(i)						\
-	 && (   (__ia64_asr_i ==   1) || (__ia64_asr_i ==   4)		\
-	     || (__ia64_asr_i ==   8) || (__ia64_asr_i ==  16)		\
-	     || (__ia64_asr_i ==  -1) || (__ia64_asr_i ==  -4)		\
-	     || (__ia64_asr_i ==  -8) || (__ia64_asr_i == -16)))	\
 		? ia64_fetch_and_add(-__ia64_asr_i, &(v)->counter)	\
 		: ia64_atomic64_sub(__ia64_asr_i, v);			\
 })
@@ -194,11 +179,7 @@ ATOMIC64_OPS(sub, -)
 #define atomic64_fetch_add(i,v)						\
 ({									\
 	long __ia64_aar_i = (i);					\
-	(__builtin_constant_p(i)					\
+	__ia64_atomic_const(i)						\
-	 && (   (__ia64_aar_i ==  1) || (__ia64_aar_i ==   4)		\
-	     || (__ia64_aar_i ==  8) || (__ia64_aar_i ==  16)		\
-	     || (__ia64_aar_i == -1) || (__ia64_aar_i ==  -4)		\
-	     || (__ia64_aar_i == -8) || (__ia64_aar_i == -16)))		\
 		? ia64_fetchadd(__ia64_aar_i, &(v)->counter, acq)	\
 		: ia64_atomic64_fetch_add(__ia64_aar_i, v);		\
 })
@@ -206,11 +187,7 @@ ATOMIC64_OPS(sub, -)
 #define atomic64_fetch_sub(i,v)						\
 ({									\
 	long __ia64_asr_i = (i);					\
-	(__builtin_constant_p(i)					\
+	__ia64_atomic_const(i)						\
-	 && (   (__ia64_asr_i ==   1) || (__ia64_asr_i ==   4)		\
-	     || (__ia64_asr_i ==   8) || (__ia64_asr_i ==  16)		\
-	     || (__ia64_asr_i ==  -1) || (__ia64_asr_i ==  -4)		\
-	     || (__ia64_asr_i ==  -8) || (__ia64_asr_i == -16)))	\
 		? ia64_fetchadd(-__ia64_asr_i, &(v)->counter, acq)	\
 		: ia64_atomic64_fetch_sub(__ia64_asr_i, v);		\
 })

arch/ia64/kernel/err_inject.c

@@ -117,7 +117,7 @@ store_call_start(struct device *dev, struct device_attribute *attr,
 
 #ifdef ERR_INJ_DEBUG
 	printk(KERN_DEBUG "Returns: status=%d,\n", (int)status[cpu]);
-	printk(KERN_DEBUG "capapbilities=%lx,\n", capabilities[cpu]);
+	printk(KERN_DEBUG "capabilities=%lx,\n", capabilities[cpu]);
 	printk(KERN_DEBUG "resources=%lx\n", resources[cpu]);
 #endif
 	return size;
@@ -142,7 +142,7 @@ store_virtual_to_phys(struct device *dev, struct device_attribute *attr,
 	u64 virt_addr=simple_strtoull(buf, NULL, 16);
 	int ret;
 
-	ret = get_user_pages(virt_addr, 1, FOLL_WRITE, NULL, NULL);
+	ret = get_user_pages_fast(virt_addr, 1, FOLL_WRITE, NULL);
 	if (ret<=0) {
 #ifdef ERR_INJ_DEBUG
 		printk("Virtual address %lx is not existing.\n",virt_addr);

arch/ia64/scripts/unwcheck.py

@@ -16,7 +16,7 @@ import re
 import sys
 
 if len(sys.argv) != 2:
-    print "Usage: %s FILE" % sys.argv[0]
+    print("Usage: %s FILE" % sys.argv[0])
     sys.exit(2)
 
 readelf = os.getenv("READELF", "readelf")
@@ -29,7 +29,7 @@ def check_func (func, slots, rlen_sum):
         global num_errors
         num_errors += 1
         if not func: func = "[%#x-%#x]" % (start, end)
-        print "ERROR: %s: %lu slots, total region length = %lu" % (func, slots, rlen_sum)
+        print("ERROR: %s: %lu slots, total region length = %lu" % (func, slots, rlen_sum))
     return
 
 num_funcs = 0
@@ -43,23 +43,23 @@ for line in os.popen("%s -u %s" % (readelf, sys.argv[1])):
         check_func(func, slots, rlen_sum)
 
         func  = m.group(1)
-        start = long(m.group(2), 16)
+        start = int(m.group(2), 16)
-        end   = long(m.group(3), 16)
+        end   = int(m.group(3), 16)
         slots = 3 * (end - start) / 16
-        rlen_sum = 0L
+        rlen_sum = 0
         num_funcs += 1
     else:
         m = rlen_pattern.match(line)
         if m:
-            rlen_sum += long(m.group(1))
+            rlen_sum += int(m.group(1))
 check_func(func, slots, rlen_sum)
 
 if num_errors == 0:
-    print "No errors detected in %u functions." % num_funcs
+    print("No errors detected in %u functions." % num_funcs)
 else:
     if num_errors > 1:
         err="errors"
     else:
         err="error"
-    print "%u %s detected in %u functions." % (num_errors, err, num_funcs)
+    print("%u %s detected in %u functions." % (num_errors, err, num_funcs))
     sys.exit(1)

arch/microblaze/Kconfig

@@ -24,6 +24,7 @@ config MICROBLAZE
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER
+	select NO_BOOTMEM
 	select HAVE_MEMBLOCK
 	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_OPROFILE

arch/microblaze/Kconfig.platform

@@ -8,7 +8,6 @@ menu "Platform options"
 
 config OPT_LIB_FUNCTION
 	bool "Optimalized lib function"
-	depends on CPU_LITTLE_ENDIAN
 	default y
 	help
 	  Allows turn on optimalized library function (memcpy and memmove).
@@ -21,6 +20,7 @@ config OPT_LIB_FUNCTION
 config OPT_LIB_ASM
 	bool "Optimalized lib function ASM"
 	depends on OPT_LIB_FUNCTION && (XILINX_MICROBLAZE0_USE_BARREL = 1)
+	depends on CPU_BIG_ENDIAN
 	default n
 	help
 	  Allows turn on optimalized library function (memcpy and memmove).

arch/microblaze/include/asm/setup.h

@@ -44,7 +44,6 @@ void machine_shutdown(void);
 void machine_halt(void);
 void machine_power_off(void);
 
-extern void *alloc_maybe_bootmem(size_t size, gfp_t mask);
 extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
 
 # endif /* __ASSEMBLY__ */

arch/microblaze/lib/fastcopy.S

@@ -29,10 +29,6 @@
  *	between mem locations with size of xfer spec'd in bytes
  */
 
-#ifdef __MICROBLAZEEL__
-#error Microblaze LE not support ASM optimized lib func. Disable OPT_LIB_ASM.
-#endif
-
 #include <linux/linkage.h>
 	.text
 	.globl	memcpy

arch/microblaze/mm/init.c

@@ -32,9 +32,6 @@ int mem_init_done;
 #ifndef CONFIG_MMU
 unsigned int __page_offset;
 EXPORT_SYMBOL(__page_offset);
-
-#else
-static int init_bootmem_done;
 #endif /* CONFIG_MMU */
 
 char *klimit = _end;
@@ -117,7 +114,6 @@ static void __init paging_init(void)
 
 void __init setup_memory(void)
 {
-	unsigned long map_size;
 	struct memblock_region *reg;
 
 #ifndef CONFIG_MMU
@@ -174,17 +170,6 @@ void __init setup_memory(void)
 	pr_info("%s: max_low_pfn: %#lx\n", __func__, max_low_pfn);
 	pr_info("%s: max_pfn: %#lx\n", __func__, max_pfn);
 
-	/*
-	 * Find an area to use for the bootmem bitmap.
-	 * We look for the first area which is at least
-	 * 128kB in length (128kB is enough for a bitmap
-	 * for 4GB of memory, using 4kB pages), plus 1 page
-	 * (in case the address isn't page-aligned).
-	 */
-	map_size = init_bootmem_node(NODE_DATA(0),
-		PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn);
-	memblock_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size);
-
 	/* Add active regions with valid PFNs */
 	for_each_memblock(memory, reg) {
 		unsigned long start_pfn, end_pfn;
@@ -196,32 +181,9 @@ void __init setup_memory(void)
 				  &memblock.memory, 0);
 	}
 
-	/* free bootmem is whole main memory */
-	free_bootmem_with_active_regions(0, max_low_pfn);
-
-	/* reserve allocate blocks */
-	for_each_memblock(reserved, reg) {
-		unsigned long top = reg->base + reg->size - 1;
-
-		pr_debug("reserved - 0x%08x-0x%08x, %lx, %lx\n",
-			 (u32) reg->base, (u32) reg->size, top,
-						memory_start + lowmem_size - 1);
-
-		if (top <= (memory_start + lowmem_size - 1)) {
-			reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT);
-		} else if (reg->base < (memory_start + lowmem_size - 1)) {
-			unsigned long trunc_size = memory_start + lowmem_size -
-								reg->base;
-			reserve_bootmem(reg->base, trunc_size, BOOTMEM_DEFAULT);
-		}
-	}
-
 	/* XXX need to clip this if using highmem? */
 	sparse_memory_present_with_active_regions(0);
 
-#ifdef CONFIG_MMU
-	init_bootmem_done = 1;
-#endif
 	paging_init();
 }
 
@@ -398,30 +360,16 @@ asmlinkage void __init mmu_init(void)
 /* This is only called until mem_init is done. */
 void __init *early_get_page(void)
 {
-	void *p;
-	if (init_bootmem_done) {
-		p = alloc_bootmem_pages(PAGE_SIZE);
-	} else {
 	/*
 	 * Mem start + kernel_tlb -> here is limit
 	 * because of mem mapping from head.S
 	 */
-		p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE,
+	return __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE,
 				memory_start + kernel_tlb));
-	}
-	return p;
 }
 
 #endif /* CONFIG_MMU */
 
-void * __ref alloc_maybe_bootmem(size_t size, gfp_t mask)
-{
-	if (mem_init_done)
-		return kmalloc(size, mask);
-	else
-		return alloc_bootmem(size);
-}
-
 void * __ref zalloc_maybe_bootmem(size_t size, gfp_t mask)
 {
 	void *p;

arch/mips/ath25/board.c

@@ -135,6 +135,8 @@ int __init ath25_find_config(phys_addr_t base, unsigned long size)
 	}
 
 	board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
+	if (!board_data)
+		goto error;
 	ath25_board.config = (struct ath25_boarddata *)board_data;
 	memcpy_fromio(board_data, bcfg, 0x100);
 	if (broken_boarddata) {

arch/mips/cavium-octeon/octeon-irq.c

@@ -2277,6 +2277,8 @@ static int __init octeon_irq_init_cib(struct device_node *ciu_node,
 	}
 
 	host_data = kzalloc(sizeof(*host_data), GFP_KERNEL);
+	if (!host_data)
+		return -ENOMEM;
 	raw_spin_lock_init(&host_data->lock);
 
 	addr = of_get_address(ciu_node, 0, NULL, NULL);

arch/mips/kernel/smp-bmips.c

@@ -168,11 +168,11 @@ static void bmips_prepare_cpus(unsigned int max_cpus)
 		return;
 	}
 
-	if (request_irq(IPI0_IRQ, bmips_ipi_interrupt, IRQF_PERCPU,
+	if (request_irq(IPI0_IRQ, bmips_ipi_interrupt,
-			"smp_ipi0", NULL))
+			IRQF_PERCPU | IRQF_NO_SUSPEND, "smp_ipi0", NULL))
 		panic("Can't request IPI0 interrupt");
-	if (request_irq(IPI1_IRQ, bmips_ipi_interrupt, IRQF_PERCPU,
+	if (request_irq(IPI1_IRQ, bmips_ipi_interrupt,
-			"smp_ipi1", NULL))
+			IRQF_PERCPU | IRQF_NO_SUSPEND, "smp_ipi1", NULL))
 		panic("Can't request IPI1 interrupt");
 }
 

arch/mips/loongson64/Kconfig

@@ -7,6 +7,8 @@ choice
 config LEMOTE_FULOONG2E
 	bool "Lemote Fuloong(2e) mini-PC"
 	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_MIGHT_HAVE_PC_SERIO
 	select CEVT_R4K
 	select CSRC_R4K
 	select SYS_HAS_CPU_LOONGSON2E
@@ -33,6 +35,8 @@ config LEMOTE_FULOONG2E
 config LEMOTE_MACH2F
 	bool "Lemote Loongson 2F family machines"
 	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_MIGHT_HAVE_PC_SERIO
 	select BOARD_SCACHE
 	select BOOT_ELF32
 	select CEVT_R4K if ! MIPS_EXTERNAL_TIMER
@@ -62,6 +66,8 @@ config LEMOTE_MACH2F
 config LOONGSON_MACH3X
 	bool "Generic Loongson 3 family machines"
 	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_MIGHT_HAVE_PC_SERIO
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select BOOT_ELF32
 	select BOARD_SCACHE

arch/parisc/include/asm/cacheflush.h

@@ -26,6 +26,7 @@ void flush_user_icache_range_asm(unsigned long, unsigned long);
 void flush_kernel_icache_range_asm(unsigned long, unsigned long);
 void flush_user_dcache_range_asm(unsigned long, unsigned long);
 void flush_kernel_dcache_range_asm(unsigned long, unsigned long);
+void purge_kernel_dcache_range_asm(unsigned long, unsigned long);
 void flush_kernel_dcache_page_asm(void *);
 void flush_kernel_icache_page(void *);