From a7d2bf25a4837e6514a2747380fd4539b63ee20c Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 14 Apr 2015 17:35:12 +0300 Subject: [PATCH 001/337] HID: i2c-hid: Do not fail probing if gpiolib is not enabled Using GPIOs and gpiolib is optional. If the kernel is compiled without GPIO support the driver should not fail if it finds the interrupt using normal methods. However, commit a485923efbb8 ("HID: i2c-hid: Add support for ACPI GPIO interrupts") did not take into account that acpi_dev_add_driver_gpios() returns -ENXIO when !CONFIG_GPIOLIB. Fix this by checking the return value against -ENXIO and 0 and only in that case fail the probe. Reported-by: Gabriele Mazzotta Signed-off-by: Mika Westerberg Signed-off-by: Jiri Kosina --- drivers/hid/i2c-hid/i2c-hid.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c index ab4dd952b6ba..92d6cdf02460 100644 --- a/drivers/hid/i2c-hid/i2c-hid.c +++ b/drivers/hid/i2c-hid/i2c-hid.c @@ -862,6 +862,7 @@ static int i2c_hid_acpi_pdata(struct i2c_client *client, union acpi_object *obj; struct acpi_device *adev; acpi_handle handle; + int ret; handle = ACPI_HANDLE(&client->dev); if (!handle || acpi_bus_get_device(handle, &adev)) @@ -877,7 +878,9 @@ static int i2c_hid_acpi_pdata(struct i2c_client *client, pdata->hid_descriptor_address = obj->integer.value; ACPI_FREE(obj); - return acpi_dev_add_driver_gpios(adev, i2c_hid_acpi_gpios); + /* GPIOs are optional */ + ret = acpi_dev_add_driver_gpios(adev, i2c_hid_acpi_gpios); + return ret < 0 && ret != -ENXIO ? ret : 0; } static const struct acpi_device_id i2c_hid_acpi_match[] = { From ca082355b542710fd07559ee05f6975c2768344b Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Mon, 27 Apr 2015 20:36:28 +0900 Subject: [PATCH 002/337] clk: Use CONFIG_ARCH_EXYNOS instead of CONFIG_ARCH_EXYNOS5433 This patch removes the CONFIG_ARCH_EXYNOS5433 and then use only the CONFIG_ARCH_EXYNOS for ARM-64bit Exynos5433 SoC. Signed-off-by: Chanwoo Choi Signed-off-by: Sylwester Nawrocki --- drivers/clk/samsung/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile index 17e9af7fe81f..a17683b2cf27 100644 --- a/drivers/clk/samsung/Makefile +++ b/drivers/clk/samsung/Makefile @@ -10,7 +10,7 @@ obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o obj-$(CONFIG_SOC_EXYNOS5260) += clk-exynos5260.o obj-$(CONFIG_SOC_EXYNOS5410) += clk-exynos5410.o obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o -obj-$(CONFIG_ARCH_EXYNOS5433) += clk-exynos5433.o +obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos5433.o obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-clkout.o From a84d1f546c0ef11446d8db6fd1a2c8d24d107b0b Mon Sep 17 00:00:00 2001 From: Jonghwa Lee Date: Mon, 27 Apr 2015 20:36:29 +0900 Subject: [PATCH 003/337] clk: exynos5433: Fix wrong offset of PCLK_MSCL_SECURE_SMMU_JPEG This patch fixes the wrong offoset of PCLK_MSCL_SECURE_SMMU_JPEG in CMU_MSCL domain. Fixes: b274bbfd8b4a94 (clk: samsung: exynos5433: Add clocks for CMU_MSCL domain) Signed-off-by: Jonghwa Lee Signed-off-by: Chanwoo Choi Reviewed-by: Krzysztof Kozlowski Signed-off-by: Sylwester Nawrocki --- drivers/clk/samsung/clk-exynos5433.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c index 387e3e39e635..543f9c7707a7 100644 --- a/drivers/clk/samsung/clk-exynos5433.c +++ b/drivers/clk/samsung/clk-exynos5433.c @@ -3927,7 +3927,7 @@ CLK_OF_DECLARE(exynos5433_cmu_atlas, "samsung,exynos5433-cmu-atlas", #define ENABLE_PCLK_MSCL 0x0900 #define ENABLE_PCLK_MSCL_SECURE_SMMU_M2MSCALER0 0x0904 #define ENABLE_PCLK_MSCL_SECURE_SMMU_M2MSCALER1 0x0908 -#define ENABLE_PCLK_MSCL_SECURE_SMMU_JPEG 0x000c +#define ENABLE_PCLK_MSCL_SECURE_SMMU_JPEG 0x090c #define ENABLE_SCLK_MSCL 0x0a00 #define ENABLE_IP_MSCL0 0x0b00 #define ENABLE_IP_MSCL1 0x0b04 From 1a9f6c887db891ed477642c38a1e17ee23c3f02b Mon Sep 17 00:00:00 2001 From: Jonghwa Lee Date: Mon, 27 Apr 2015 20:36:30 +0900 Subject: [PATCH 004/337] clk: exynos5433: Fix CLK_PCLK_MONOTONIC_CNT clk register assignment CLK_PCLK_MONOTONIC_CNT clock had a wrong register assigned to it. The correct register is ENABLE_PCLK_MIF_SECURE_MONOTONIC_CNT. Signed-off-by: Jonghwa Lee Signed-off-by: Chanwoo Choi Reviewed-by: Krzysztof Kozlowski Signed-off-by: Sylwester Nawrocki --- drivers/clk/samsung/clk-exynos5433.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c index 543f9c7707a7..b1a546e402aa 100644 --- a/drivers/clk/samsung/clk-exynos5433.c +++ b/drivers/clk/samsung/clk-exynos5433.c @@ -1490,7 +1490,7 @@ static struct samsung_gate_clock mif_gate_clks[] __initdata = { /* ENABLE_PCLK_MIF_SECURE_MONOTONIC_CNT */ GATE(CLK_PCLK_MONOTONIC_CNT, "pclk_monotonic_cnt", "div_aclk_mif_133", - ENABLE_PCLK_MIF_SECURE_RTC, 0, 0, 0), + ENABLE_PCLK_MIF_SECURE_MONOTONIC_CNT, 0, 0, 0), /* ENABLE_PCLK_MIF_SECURE_RTC */ GATE(CLK_PCLK_RTC, "pclk_rtc", "div_aclk_mif_133", From b57c93be79e4061b8878315df2f6a239ad967d50 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Mon, 27 Apr 2015 20:36:31 +0900 Subject: [PATCH 005/337] clk: exynos5433: Fix wrong parent clock of sclk_apollo clock This patch fixes the wrong parent clock of sclk_apollo clock from 'div_apollo_pll' to 'div_apollo2'. Signed-off-by: Chanwoo Choi Reviewed-by: Krzysztof Kozlowski Signed-off-by: Sylwester Nawrocki --- drivers/clk/samsung/clk-exynos5433.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c index b1a546e402aa..ec294260ef09 100644 --- a/drivers/clk/samsung/clk-exynos5433.c +++ b/drivers/clk/samsung/clk-exynos5433.c @@ -3665,7 +3665,7 @@ static struct samsung_gate_clock apollo_gate_clks[] __initdata = { ENABLE_SCLK_APOLLO, 3, CLK_IGNORE_UNUSED, 0), GATE(CLK_SCLK_HPM_APOLLO, "sclk_hpm_apollo", "div_sclk_hpm_apollo", ENABLE_SCLK_APOLLO, 1, CLK_IGNORE_UNUSED, 0), - GATE(CLK_SCLK_APOLLO, "sclk_apollo", "div_apollo_pll", + GATE(CLK_SCLK_APOLLO, "sclk_apollo", "div_apollo2", ENABLE_SCLK_APOLLO, 0, CLK_IGNORE_UNUSED, 0), }; From 85943d7ea5832afd454b7219ec1d8c2498c4fbcc Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Mon, 27 Apr 2015 20:36:32 +0900 Subject: [PATCH 006/337] clk: exynos5433: Fix wrong PMS value of exynos5433_pll_rates This patch fixes the wrong PMS value of exynos5433_pll_rates table for {ATLAS|APOLLO|MEM0|MEM1|BUS|MFC|MPHY|G3D|DISP|ISP|_PLL. - 720 MHz (mdiv=360, pdiv=6, sdiv=1) -> 700 MHz (mdiv=175, pdiv=3, sdiv=1) - 350 MHz (mdiv=360, pdiv=6, sdiv=2) -> (mdiv=350, pdiv=6, sdiv=2) - 133 MHz (mdiv=552, pdiv=6, sdiv=4) -> (mdiv=532, pdiv=6, sdiv=4) Signed-off-by: Chanwoo Choi Signed-off-by: Sylwester Nawrocki --- drivers/clk/samsung/clk-exynos5433.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c index ec294260ef09..9e04ae2bb4d7 100644 --- a/drivers/clk/samsung/clk-exynos5433.c +++ b/drivers/clk/samsung/clk-exynos5433.c @@ -748,7 +748,7 @@ static struct samsung_pll_rate_table exynos5443_pll_rates[] = { PLL_35XX_RATE(825000000U, 275, 4, 1), PLL_35XX_RATE(800000000U, 400, 6, 1), PLL_35XX_RATE(733000000U, 733, 12, 1), - PLL_35XX_RATE(700000000U, 360, 6, 1), + PLL_35XX_RATE(700000000U, 175, 3, 1), PLL_35XX_RATE(667000000U, 222, 4, 1), PLL_35XX_RATE(633000000U, 211, 4, 1), PLL_35XX_RATE(600000000U, 500, 5, 2), @@ -760,14 +760,14 @@ static struct samsung_pll_rate_table exynos5443_pll_rates[] = { PLL_35XX_RATE(444000000U, 370, 5, 2), PLL_35XX_RATE(420000000U, 350, 5, 2), PLL_35XX_RATE(400000000U, 400, 6, 2), - PLL_35XX_RATE(350000000U, 360, 6, 2), + PLL_35XX_RATE(350000000U, 350, 6, 2), PLL_35XX_RATE(333000000U, 222, 4, 2), PLL_35XX_RATE(300000000U, 500, 5, 3), PLL_35XX_RATE(266000000U, 532, 6, 3), PLL_35XX_RATE(200000000U, 400, 6, 3), PLL_35XX_RATE(166000000U, 332, 6, 3), PLL_35XX_RATE(160000000U, 320, 6, 3), - PLL_35XX_RATE(133000000U, 552, 6, 4), + PLL_35XX_RATE(133000000U, 532, 6, 4), PLL_35XX_RATE(100000000U, 400, 6, 4), { /* sentinel */ } }; From 771aada9ace7e5dd837a69ef0bca08b5455b2d36 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Mon, 27 Apr 2015 11:12:25 +0200 Subject: [PATCH 007/337] s390/bpf: Adjust ALU64_DIV/MOD to match interpreter change The s390x ALU64_DIV/MOD has been implemented according to the eBPF interpreter specification that used do_div(). This function does a 64-bit by 32-bit divide. It turned out that this was wrong and now the interpreter uses div64_u64_rem() for full 64-bit division. So fix this and use full 64-bit division in the s390x eBPF backend code. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/net/bpf_jit_comp.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index 7690dc8e1ab5..065aca02bc65 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -588,8 +588,8 @@ static int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i) EMIT4(0xb9160000, dst_reg, rc_reg); break; } - case BPF_ALU64 | BPF_DIV | BPF_X: /* dst = dst / (u32) src */ - case BPF_ALU64 | BPF_MOD | BPF_X: /* dst = dst % (u32) src */ + case BPF_ALU64 | BPF_DIV | BPF_X: /* dst = dst / src */ + case BPF_ALU64 | BPF_MOD | BPF_X: /* dst = dst % src */ { int rc_reg = BPF_OP(insn->code) == BPF_DIV ? REG_W1 : REG_W0; @@ -602,10 +602,8 @@ static int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i) EMIT4_IMM(0xa7090000, REG_W0, 0); /* lgr %w1,%dst */ EMIT4(0xb9040000, REG_W1, dst_reg); - /* llgfr %dst,%src (u32 cast) */ - EMIT4(0xb9160000, dst_reg, src_reg); /* dlgr %w0,%dst */ - EMIT4(0xb9870000, REG_W0, dst_reg); + EMIT4(0xb9870000, REG_W0, src_reg); /* lgr %dst,%rc */ EMIT4(0xb9040000, dst_reg, rc_reg); break; @@ -632,8 +630,8 @@ static int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i) EMIT4(0xb9160000, dst_reg, rc_reg); break; } - case BPF_ALU64 | BPF_DIV | BPF_K: /* dst = dst / (u32) imm */ - case BPF_ALU64 | BPF_MOD | BPF_K: /* dst = dst % (u32) imm */ + case BPF_ALU64 | BPF_DIV | BPF_K: /* dst = dst / imm */ + case BPF_ALU64 | BPF_MOD | BPF_K: /* dst = dst % imm */ { int rc_reg = BPF_OP(insn->code) == BPF_DIV ? REG_W1 : REG_W0; @@ -649,7 +647,7 @@ static int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i) EMIT4(0xb9040000, REG_W1, dst_reg); /* dlg %w0,(%l) */ EMIT6_DISP_LH(0xe3000000, 0x0087, REG_W0, REG_0, REG_L, - EMIT_CONST_U64((u32) imm)); + EMIT_CONST_U64(imm)); /* lgr %dst,%rc */ EMIT4(0xb9040000, dst_reg, rc_reg); break; From 8cc2af7c530e320db442e6efec8c84c125c07c81 Mon Sep 17 00:00:00 2001 From: Ingo Tuchscherer Date: Tue, 28 Apr 2015 10:31:44 +0200 Subject: [PATCH 008/337] s390/zcrypt: fixed ap poll timer behavior The ap poll timer restart condition was wrong. Hence the poll timer was not restarted reliable when setting a new time interval via the poll_timeout sysfs attribute. Added missing timer locking. Reported-by: Thomas Gleixner Signed-off-by: Ingo Tuchscherer Signed-off-by: Martin Schwidefsky --- drivers/s390/crypto/ap_bus.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index f0b9871a4bbd..6e506a88f43e 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -1158,11 +1158,12 @@ static ssize_t poll_timeout_store(struct bus_type *bus, const char *buf, poll_timeout = time; hr_time = ktime_set(0, poll_timeout); - if (!hrtimer_is_queued(&ap_poll_timer) || - !hrtimer_forward(&ap_poll_timer, hrtimer_get_expires(&ap_poll_timer), hr_time)) { - hrtimer_set_expires(&ap_poll_timer, hr_time); - hrtimer_start_expires(&ap_poll_timer, HRTIMER_MODE_ABS); - } + spin_lock_bh(&ap_poll_timer_lock); + hrtimer_cancel(&ap_poll_timer); + hrtimer_set_expires(&ap_poll_timer, hr_time); + hrtimer_start_expires(&ap_poll_timer, HRTIMER_MODE_ABS); + spin_unlock_bh(&ap_poll_timer_lock); + return count; } @@ -1528,14 +1529,11 @@ static inline void __ap_schedule_poll_timer(void) ktime_t hr_time; spin_lock_bh(&ap_poll_timer_lock); - if (hrtimer_is_queued(&ap_poll_timer) || ap_suspend_flag) - goto out; - if (ktime_to_ns(hrtimer_expires_remaining(&ap_poll_timer)) <= 0) { + if (!hrtimer_is_queued(&ap_poll_timer) && !ap_suspend_flag) { hr_time = ktime_set(0, poll_timeout); hrtimer_forward_now(&ap_poll_timer, hr_time); hrtimer_restart(&ap_poll_timer); } -out: spin_unlock_bh(&ap_poll_timer_lock); } From b9b4b1cef156e6b403b26ea4cb6d0caf4850e05c Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Wed, 29 Apr 2015 18:45:03 +0200 Subject: [PATCH 009/337] s390/bpf: Fix gcov stack space problem When compiling the kernel for GCOV (CONFIG_GCOV_KERNEL,-fprofile-arcs), gcc allocates a lot of stack space because of the large switch statement in bpf_jit_insn(). This leads to the following compile warning: arch/s390/net/bpf_jit_comp.c: In function 'bpf_jit_prog': arch/s390/net/bpf_jit_comp.c:1144:1: warning: frame size of function 'bpf_jit_prog' is 12592 bytes which is more than half the stack size. The dynamic check would not be reliable. No check emitted for this function. arch/s390/net/bpf_jit_comp.c:1144:1: warning: the frame size of 12504 bytes is larger than 1024 bytes [-Wframe-larger-than=] And indead gcc allocates 12592 bytes of stack space: # objdump -d arch/s390/net/bpf_jit_comp.o ... 0000000000000c60 : c60: eb 6f f0 48 00 24 stmg %r6,%r15,72(%r15) c66: b9 04 00 ef lgr %r14,%r15 c6a: e3 f0 fe d0 fc 71 lay %r15,-12592(%r15) As a workaround of that problem we now define bpf_jit_insn() as noinline which then reduces the stack space. # objdump -d arch/s390/net/bpf_jit_comp.o ... 0000000000000070 : 70: eb 6f f0 48 00 24 stmg %r6,%r15,72(%r15) 76: c0 d0 00 00 00 00 larl %r13,76 7c: a7 f1 3f 80 tmll %r15,16256 80: b9 04 00 ef lgr %r14,%r15 84: e3 f0 ff a0 ff 71 lay %r15,-96(%r15) Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/net/bpf_jit_comp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index 065aca02bc65..20c146d1251a 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -443,8 +443,11 @@ static void bpf_jit_epilogue(struct bpf_jit *jit) /* * Compile one eBPF instruction into s390x code + * + * NOTE: Use noinline because for gcov (-fprofile-arcs) gcc allocates a lot of + * stack space for the large switch statement. */ -static int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i) +static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i) { struct bpf_insn *insn = &fp->insnsi[i]; int jmp_off, last, insn_count = 1; From 27796e755a2fc6707cdf9b484a56395f703e4f3d Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 30 Apr 2015 11:57:41 +0300 Subject: [PATCH 010/337] ASoC: davinci-mcasp: Correct pm status check in suspend callback pm_runtime_enabled() will only tell if the pm runtime has been enabled for the device, which is done at probe time but will not tell the actual power state of the device. pm_runtime_active() provides this information. This patch fixes a kernel crash when doing suspend when McASP is not active. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown --- sound/soc/davinci/davinci-mcasp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c index bb4b78eada58..23c91fa65ab8 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/davinci/davinci-mcasp.c @@ -1247,7 +1247,7 @@ static int davinci_mcasp_suspend(struct snd_soc_dai *dai) u32 reg; int i; - context->pm_state = pm_runtime_enabled(mcasp->dev); + context->pm_state = pm_runtime_active(mcasp->dev); if (!context->pm_state) pm_runtime_get_sync(mcasp->dev); From 52cdc33c383850433d8c93e4aa469ed9bfcd1c56 Mon Sep 17 00:00:00 2001 From: Georgi Djakov Date: Wed, 29 Apr 2015 14:52:46 +0300 Subject: [PATCH 011/337] clk: qcom: Fix MSM8916 venus divider value One of the video codec clock frequencies has incorrect divider value. Fix it. Fixes: 3966fab8b6ab "clk: qcom: Add MSM8916 Global Clock Controller support" Signed-off-by: Georgi Djakov Signed-off-by: Stephen Boyd --- drivers/clk/qcom/gcc-msm8916.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/qcom/gcc-msm8916.c b/drivers/clk/qcom/gcc-msm8916.c index d3458474eb3a..b15d52b56c6a 100644 --- a/drivers/clk/qcom/gcc-msm8916.c +++ b/drivers/clk/qcom/gcc-msm8916.c @@ -1115,7 +1115,7 @@ static struct clk_rcg2 usb_hs_system_clk_src = { static const struct freq_tbl ftbl_gcc_venus0_vcodec0_clk[] = { F(100000000, P_GPLL0, 8, 0, 0), F(160000000, P_GPLL0, 5, 0, 0), - F(228570000, P_GPLL0, 5, 0, 0), + F(228570000, P_GPLL0, 3.5, 0, 0), { } }; From 5d45ed8f5bfaeaf50576b8d663796ee905ccf2a0 Mon Sep 17 00:00:00 2001 From: Georgi Djakov Date: Wed, 29 Apr 2015 14:52:47 +0300 Subject: [PATCH 012/337] clk: qcom: Fix MSM8916 gfx3d_clk_src configuration The gfx3d_clk_src parents configuration is incorrect. Fix it. Fixes: 3966fab8b6ab "clk: qcom: Add MSM8916 Global Clock Controller support" Signed-off-by: Georgi Djakov Signed-off-by: Stephen Boyd --- drivers/clk/qcom/gcc-msm8916.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/qcom/gcc-msm8916.c b/drivers/clk/qcom/gcc-msm8916.c index b15d52b56c6a..c66f7bc2ae87 100644 --- a/drivers/clk/qcom/gcc-msm8916.c +++ b/drivers/clk/qcom/gcc-msm8916.c @@ -71,8 +71,8 @@ static const char *gcc_xo_gpll0_bimc[] = { static const struct parent_map gcc_xo_gpll0a_gpll1_gpll2a_map[] = { { P_XO, 0 }, { P_GPLL0_AUX, 3 }, - { P_GPLL2_AUX, 2 }, { P_GPLL1, 1 }, + { P_GPLL2_AUX, 2 }, }; static const char *gcc_xo_gpll0a_gpll1_gpll2a[] = { From 88776f366ede7d9cdce60bd2c9753dd6d6fa8b77 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 1 May 2015 09:20:34 +0200 Subject: [PATCH 013/337] ALSA: hda - Add headphone quirk for Lifebook E752 Fujitsu Lifebook E752 laptop needs a similar quirk done for Lifebook T731. Otherwise the headphone is always muted. Reported-and-tested-by: Christian Weber Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index e2afd53cc14c..eb2fc79cbd32 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5119,6 +5119,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x104d, 0x9099, "Sony VAIO S13", ALC275_FIXUP_SONY_DISABLE_AAMIX), SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook", ALC269_FIXUP_LIFEBOOK), SND_PCI_QUIRK(0x10cf, 0x15dc, "Lifebook T731", ALC269_FIXUP_LIFEBOOK_HP_PIN), + SND_PCI_QUIRK(0x10cf, 0x1757, "Lifebook E752", ALC269_FIXUP_LIFEBOOK_HP_PIN), SND_PCI_QUIRK(0x10cf, 0x1845, "Lifebook U904", ALC269_FIXUP_LIFEBOOK_EXTMIC), SND_PCI_QUIRK(0x144d, 0xc109, "Samsung Ativ book 9 (NP900X3G)", ALC269_FIXUP_INV_DMIC), SND_PCI_QUIRK(0x1458, 0xfa53, "Gigabyte BXBT-2807", ALC283_FIXUP_BXBT2807_MIC), From 545774bd6e1427d98dde77244329d2311c5eca6f Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 27 Apr 2015 14:51:35 +0800 Subject: [PATCH 014/337] ASoC: mc13783: Fix wrong mask value used in mc13xxx_reg_rmw() calls mc13xxx_reg_rmw() won't change any bit if passing 0 to the mask field. Pass AUDIO_SSI_SEL instead of 0 for the mask field to set AUDIO_SSI_SEL bit. Signed-off-by: Axel Lin Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/mc13783.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/mc13783.c b/sound/soc/codecs/mc13783.c index 2ffb9a0570dc..3d44fc50e4d0 100644 --- a/sound/soc/codecs/mc13783.c +++ b/sound/soc/codecs/mc13783.c @@ -623,14 +623,14 @@ static int mc13783_probe(struct snd_soc_codec *codec) AUDIO_SSI_SEL, 0); else mc13xxx_reg_rmw(priv->mc13xxx, MC13783_AUDIO_CODEC, - 0, AUDIO_SSI_SEL); + AUDIO_SSI_SEL, AUDIO_SSI_SEL); if (priv->dac_ssi_port == MC13783_SSI1_PORT) mc13xxx_reg_rmw(priv->mc13xxx, MC13783_AUDIO_DAC, AUDIO_SSI_SEL, 0); else mc13xxx_reg_rmw(priv->mc13xxx, MC13783_AUDIO_DAC, - 0, AUDIO_SSI_SEL); + AUDIO_SSI_SEL, AUDIO_SSI_SEL); return 0; } From a928d28d4487402e6bd18bea1b8cc2b2ec6e6d8f Mon Sep 17 00:00:00 2001 From: Evgenii Lepikhin Date: Tue, 21 Apr 2015 15:49:57 +0300 Subject: [PATCH 015/337] ISCSI: fix minor memory leak This patch adds a missing kfree for sess->sess_ops memory upon transport_init_session() failure. Signed-off-by: Evgenii Lepikhin Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_login.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c index 8ce94ff744e6..70d799dfab03 100644 --- a/drivers/target/iscsi/iscsi_target_login.c +++ b/drivers/target/iscsi/iscsi_target_login.c @@ -346,6 +346,7 @@ static int iscsi_login_zero_tsih_s1( if (IS_ERR(sess->se_sess)) { iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, ISCSI_LOGIN_STATUS_NO_RESOURCES); + kfree(sess->sess_ops); kfree(sess); return -ENOMEM; } From 8ee83a747ac2309934c229281dda8f26648ec462 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Fri, 1 May 2015 10:43:45 -0700 Subject: [PATCH 016/337] target/user: Disallow full passthrough (pass_level=0) TCMU requires more work to correctly handle both user handlers that want all SCSI commands (pass_level=0) for a se_device, and also handlers that just want I/O commands and let the others be emulated by the kernel (pass_level=1). Only support the latter for now. For full passthrough, we will need to support a second se_subsystem_api template, due to configfs attributes being different between the two modes. Thus pass_level is extraneous, and we can remove it. The ABI break for TCMU v2 is already applied for this release, so it's best to do this now to avoid another ABI break in the future. Signed-off-by: Andy Grover Reviewed-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- Documentation/target/tcmu-design.txt | 18 +++----- drivers/target/target_core_user.c | 68 ++-------------------------- 2 files changed, 10 insertions(+), 76 deletions(-) diff --git a/Documentation/target/tcmu-design.txt b/Documentation/target/tcmu-design.txt index 43e94ea6d2ca..c80bf1ed8981 100644 --- a/Documentation/target/tcmu-design.txt +++ b/Documentation/target/tcmu-design.txt @@ -15,7 +15,7 @@ Contents: a) Discovering and configuring TCMU uio devices b) Waiting for events on the device(s) c) Managing the command ring -3) Command filtering and pass_level +3) Command filtering 4) A final note @@ -360,17 +360,13 @@ int handle_device_events(int fd, void *map) } -Command filtering and pass_level --------------------------------- +Command filtering +----------------- -TCMU supports a "pass_level" option with valid values of 0 or 1. When -the value is 0 (the default), nearly all SCSI commands received for -the device are passed through to the handler. This allows maximum -flexibility but increases the amount of code required by the handler, -to support all mandatory SCSI commands. If pass_level is set to 1, -then only IO-related commands are presented, and the rest are handled -by LIO's in-kernel command emulation. The commands presented at level -1 include all versions of: +Initial TCMU support is for a filtered commandset. Only IO-related +commands are presented to userspace, and the rest are handled by LIO's +in-kernel command emulation. The commands presented are all versions +of: READ WRITE diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c index dbc872a6c981..0e0feeaec39c 100644 --- a/drivers/target/target_core_user.c +++ b/drivers/target/target_core_user.c @@ -71,13 +71,6 @@ struct tcmu_hba { u32 host_id; }; -/* User wants all cmds or just some */ -enum passthru_level { - TCMU_PASS_ALL = 0, - TCMU_PASS_IO, - TCMU_PASS_INVALID, -}; - #define TCMU_CONFIG_LEN 256 struct tcmu_dev { @@ -89,7 +82,6 @@ struct tcmu_dev { #define TCMU_DEV_BIT_OPEN 0 #define TCMU_DEV_BIT_BROKEN 1 unsigned long flags; - enum passthru_level pass_level; struct uio_info uio_info; @@ -683,8 +675,6 @@ static struct se_device *tcmu_alloc_device(struct se_hba *hba, const char *name) setup_timer(&udev->timeout, tcmu_device_timedout, (unsigned long)udev); - udev->pass_level = TCMU_PASS_ALL; - return &udev->se_dev; } @@ -948,13 +938,12 @@ static void tcmu_free_device(struct se_device *dev) } enum { - Opt_dev_config, Opt_dev_size, Opt_err, Opt_pass_level, + Opt_dev_config, Opt_dev_size, Opt_err, }; static match_table_t tokens = { {Opt_dev_config, "dev_config=%s"}, {Opt_dev_size, "dev_size=%u"}, - {Opt_pass_level, "pass_level=%u"}, {Opt_err, NULL} }; @@ -965,7 +954,6 @@ static ssize_t tcmu_set_configfs_dev_params(struct se_device *dev, char *orig, *ptr, *opts, *arg_p; substring_t args[MAX_OPT_ARGS]; int ret = 0, token; - int arg; opts = kstrdup(page, GFP_KERNEL); if (!opts) @@ -998,16 +986,6 @@ static ssize_t tcmu_set_configfs_dev_params(struct se_device *dev, if (ret < 0) pr_err("kstrtoul() failed for dev_size=\n"); break; - case Opt_pass_level: - match_int(args, &arg); - if (arg >= TCMU_PASS_INVALID) { - pr_warn("TCMU: Invalid pass_level: %d\n", arg); - break; - } - - pr_debug("TCMU: Setting pass_level to %d\n", arg); - udev->pass_level = arg; - break; default: break; } @@ -1024,8 +1002,7 @@ static ssize_t tcmu_show_configfs_dev_params(struct se_device *dev, char *b) bl = sprintf(b + bl, "Config: %s ", udev->dev_config[0] ? udev->dev_config : "NULL"); - bl += sprintf(b + bl, "Size: %zu PassLevel: %u\n", - udev->dev_size, udev->pass_level); + bl += sprintf(b + bl, "Size: %zu\n", udev->dev_size); return bl; } @@ -1074,46 +1051,7 @@ static struct sbc_ops tcmu_sbc_ops = { static sense_reason_t tcmu_parse_cdb(struct se_cmd *cmd) { - unsigned char *cdb = cmd->t_task_cdb; - struct tcmu_dev *udev = TCMU_DEV(cmd->se_dev); - sense_reason_t ret; - - switch (udev->pass_level) { - case TCMU_PASS_ALL: - /* We're just like pscsi, then */ - /* - * For REPORT LUNS we always need to emulate the response, for everything - * else, pass it up. - */ - switch (cdb[0]) { - case REPORT_LUNS: - cmd->execute_cmd = spc_emulate_report_luns; - break; - case READ_6: - case READ_10: - case READ_12: - case READ_16: - case WRITE_6: - case WRITE_10: - case WRITE_12: - case WRITE_16: - case WRITE_VERIFY: - cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB; - /* FALLTHROUGH */ - default: - cmd->execute_cmd = tcmu_pass_op; - } - ret = TCM_NO_SENSE; - break; - case TCMU_PASS_IO: - ret = sbc_parse_cdb(cmd, &tcmu_sbc_ops); - break; - default: - pr_err("Unknown tcm-user pass level %d\n", udev->pass_level); - ret = TCM_CHECK_CONDITION_ABORT_CMD; - } - - return ret; + return sbc_parse_cdb(cmd, &tcmu_sbc_ops); } DEF_TB_DEFAULT_ATTRIBS(tcmu); From ec6bfca835b61df360881c1bf89268f69fed2a61 Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Mon, 4 May 2015 15:50:47 +0800 Subject: [PATCH 017/337] ALSA: hda/realtek - Fix typo for ALC286/ALC288 Delete more one break for ALC286/ALC288. Signed-off-by: Kailang Yang Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index eb2fc79cbd32..516a0da6c080 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3738,7 +3738,6 @@ static void alc_headset_mode_default(struct hda_codec *codec) case 0x10ec0288: alc_process_coef_fw(codec, coef0288); break; - break; case 0x10ec0292: alc_process_coef_fw(codec, coef0292); break; From 810e4425c224af6be67dff68c8832af1b5a11f89 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Sun, 3 May 2015 21:11:47 +0300 Subject: [PATCH 018/337] ASoC: uda1380: Avoid accessing i2c bus when codec is disabled set_dai_fmt_both() callback is called from snd_soc_runtime_set_dai_fmt() which is called from snd_soc_register_card(), but at this time codec is not powered on yet. Replace direct i2c write with regcache write. Fixes: 5f0acedddf533c (ASoC: rx1950_uda1380: Use static DAI format setup) Fixes: 5cc10b9b77c234 (ASoC: h1940_uda1380: Use static DAI format setup) Signed-off-by: Vasily Khoruzhick Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/uda1380.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c index dc7778b6dd7f..c3c33bd0df1c 100644 --- a/sound/soc/codecs/uda1380.c +++ b/sound/soc/codecs/uda1380.c @@ -437,7 +437,7 @@ static int uda1380_set_dai_fmt_both(struct snd_soc_dai *codec_dai, if ((fmt & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBS_CFS) return -EINVAL; - uda1380_write(codec, UDA1380_IFACE, iface); + uda1380_write_reg_cache(codec, UDA1380_IFACE, iface); return 0; } From 97372e5a99449b4fffa824a382ad6358066a9918 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Wed, 8 Apr 2015 07:34:12 +0200 Subject: [PATCH 019/337] clk: exynos5420: Restore GATE_BUS_TOP on suspend Commit ae43b3289186 ("ARM: 8202/1: dmaengine: pl330: Add runtime Power Management support v12") added pm support for the pl330 dma driver but it makes the clock for the Exynos5420 MDMA0 DMA controller to be gated during suspend and this in turn makes its parent clock aclk266_g2d to be gated. But the clock needs to be ungated prior suspend to allow the system to be suspend and resumed correctly. Add GATE_BUS_TOP register to the list of registers to be restored when the system enters into a suspend state so aclk266_g2d will be ungated. Thanks to Abhilash Kesavan for figuring out that this was the issue. Fixes: ae43b32 ("ARM: 8202/1: dmaengine: pl330: Add runtime Power Management support v12") Cc: stable@vger.kernel.org # 3.19+ Signed-off-by: Javier Martinez Canillas Tested-by: Kevin Hilman Tested-by: Abhilash Kesavan Acked-by: Tomasz Figa Signed-off-by: Sylwester Nawrocki --- drivers/clk/samsung/clk-exynos5420.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c index 07d666cc6a29..bea4a173eef5 100644 --- a/drivers/clk/samsung/clk-exynos5420.c +++ b/drivers/clk/samsung/clk-exynos5420.c @@ -271,6 +271,7 @@ static const struct samsung_clk_reg_dump exynos5420_set_clksrc[] = { { .offset = SRC_MASK_PERIC0, .value = 0x11111110, }, { .offset = SRC_MASK_PERIC1, .value = 0x11111100, }, { .offset = SRC_MASK_ISP, .value = 0x11111000, }, + { .offset = GATE_BUS_TOP, .value = 0xffffffff, }, { .offset = GATE_BUS_DISP1, .value = 0xffffffff, }, { .offset = GATE_IP_PERIC, .value = 0xffffffff, }, }; From 2c674fac5b1603c6a2aacc88116e3fbc75ebd799 Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Tue, 5 May 2015 15:02:42 +0800 Subject: [PATCH 020/337] ALSA: hda/realtek - Add ALC298 alias name for Dell Add ALC3266 for Dell platform. Signed-off-by: Kailang Yang Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 516a0da6c080..4a0a238c9864 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -883,6 +883,7 @@ static struct alc_codec_rename_pci_table rename_pci_tbl[] = { { 0x10ec0668, 0x1028, 0, "ALC3661" }, { 0x10ec0275, 0x1028, 0, "ALC3260" }, { 0x10ec0899, 0x1028, 0, "ALC3861" }, + { 0x10ec0298, 0x1028, 0, "ALC3266" }, { 0x10ec0670, 0x1025, 0, "ALC669X" }, { 0x10ec0676, 0x1025, 0, "ALC679X" }, { 0x10ec0282, 0x1043, 0, "ALC3229" }, From d2a5d46b167a9a8231264daf80165b739aecf1d7 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Wed, 15 Apr 2015 22:26:36 +0800 Subject: [PATCH 021/337] clk: add missing lock when call clk_core_enable in clk_set_parent Before commit 035a61c314eb ("clk: Make clk API return per-user struct clk instances") we acquired the enable_lock in __clk_set_parent_{before,after}() by means of calling clk_enable(). After commit 035a61c314eb we use clk_core_enable() in place of the clk_enable(), and clk_core_enable() doesn't acquire the enable_lock. This opens up a race condition between clk_set_parent() and clk_enable(). Fix it. Fixes: 035a61c314eb ("clk: Make clk API return per-user struct clk instances") Cc: Mike Turquette Cc: Stephen Boyd Signed-off-by: Dong Aisheng Signed-off-by: Stephen Boyd --- drivers/clk/clk.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 459ce9da13e0..5b0f41868b42 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -1475,8 +1475,10 @@ static struct clk_core *__clk_set_parent_before(struct clk_core *clk, */ if (clk->prepare_count) { clk_core_prepare(parent); + flags = clk_enable_lock(); clk_core_enable(parent); clk_core_enable(clk); + clk_enable_unlock(flags); } /* update the clk tree topology */ @@ -1491,13 +1493,17 @@ static void __clk_set_parent_after(struct clk_core *core, struct clk_core *parent, struct clk_core *old_parent) { + unsigned long flags; + /* * Finish the migration of prepare state and undo the changes done * for preventing a race with clk_enable(). */ if (core->prepare_count) { + flags = clk_enable_lock(); clk_core_disable(core); clk_core_disable(old_parent); + clk_enable_unlock(flags); clk_core_unprepare(old_parent); } } @@ -1525,8 +1531,10 @@ static int __clk_set_parent(struct clk_core *clk, struct clk_core *parent, clk_enable_unlock(flags); if (clk->prepare_count) { + flags = clk_enable_lock(); clk_core_disable(clk); clk_core_disable(parent); + clk_enable_unlock(flags); clk_core_unprepare(parent); } return ret; From 5006c1052aafa01dab5b0e643b7dac755b41f3bb Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 6 May 2015 15:01:31 -0400 Subject: [PATCH 022/337] Revert "HID: logitech-hidpp: support combo keyboard touchpad TK820" This reverts commit 3a61e97563d78a2ca10752902449570d8433ce76. The Logitech TK820 seems to be affected by a firmware bug which delays the sending of the keys (pressed, or released, which triggers a key-repeat) while holding fingers on the touch sensor. This behavior can be observed while using the mouse emulation mode if the user moves the finger while typing (highly improbable though). Holding the finger still while in the mouse emulation mode does not trigger the key repeat problem. So better keep things in their previous state to not have to explain users that the new key-repeat bug they see is a "feature". Furthermore, I noticed that I disabled the media keys whith this patch. Sorry, my bad. I think it is best to revert the patch, in all the current versions it has been shipped. Cc: # v3.19 and above Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-logitech-hidpp.c | 20 -------------------- 1 file changed, 20 deletions(-) diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c index b3cf6fd4be96..5fd530acf747 100644 --- a/drivers/hid/hid-logitech-hidpp.c +++ b/drivers/hid/hid-logitech-hidpp.c @@ -44,7 +44,6 @@ MODULE_PARM_DESC(disable_raw_mode, /* bits 1..20 are reserved for classes */ #define HIDPP_QUIRK_DELAYED_INIT BIT(21) #define HIDPP_QUIRK_WTP_PHYSICAL_BUTTONS BIT(22) -#define HIDPP_QUIRK_MULTI_INPUT BIT(23) /* * There are two hidpp protocols in use, the first version hidpp10 is known @@ -706,12 +705,6 @@ static int wtp_input_mapping(struct hid_device *hdev, struct hid_input *hi, struct hid_field *field, struct hid_usage *usage, unsigned long **bit, int *max) { - struct hidpp_device *hidpp = hid_get_drvdata(hdev); - - if ((hidpp->quirks & HIDPP_QUIRK_MULTI_INPUT) && - (field->application == HID_GD_KEYBOARD)) - return 0; - return -1; } @@ -720,10 +713,6 @@ static void wtp_populate_input(struct hidpp_device *hidpp, { struct wtp_data *wd = hidpp->private_data; - if ((hidpp->quirks & HIDPP_QUIRK_MULTI_INPUT) && origin_is_hid_core) - /* this is the generic hid-input call */ - return; - __set_bit(EV_ABS, input_dev->evbit); __set_bit(EV_KEY, input_dev->evbit); __clear_bit(EV_REL, input_dev->evbit); @@ -1245,10 +1234,6 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id) if (hidpp->quirks & HIDPP_QUIRK_DELAYED_INIT) connect_mask &= ~HID_CONNECT_HIDINPUT; - /* Re-enable hidinput for multi-input devices */ - if (hidpp->quirks & HIDPP_QUIRK_MULTI_INPUT) - connect_mask |= HID_CONNECT_HIDINPUT; - ret = hid_hw_start(hdev, connect_mask); if (ret) { hid_err(hdev, "%s:hid_hw_start returned error\n", __func__); @@ -1296,11 +1281,6 @@ static const struct hid_device_id hidpp_devices[] = { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_T651), .driver_data = HIDPP_QUIRK_CLASS_WTP }, - { /* Keyboard TK820 */ - HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, - USB_VENDOR_ID_LOGITECH, 0x4102), - .driver_data = HIDPP_QUIRK_DELAYED_INIT | HIDPP_QUIRK_MULTI_INPUT | - HIDPP_QUIRK_CLASS_WTP }, { HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, USB_VENDOR_ID_LOGITECH, HID_ANY_ID)}, From a3bd92519879ddc3052140e6776173f266c934eb Mon Sep 17 00:00:00 2001 From: "Fang, Yang A" Date: Thu, 23 Apr 2015 16:35:17 -0700 Subject: [PATCH 023/337] ASoC: rt5645: Add ACPI match ID This patch adds the ACPI match ID for rt5645/5650 codec Signed-off-by: Fang, Yang A Signed-off-by: Mark Brown --- sound/soc/codecs/rt5645.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 69528ae5410c..61ca49fbf1ec 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -2656,6 +2657,15 @@ static const struct i2c_device_id rt5645_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, rt5645_i2c_id); +#ifdef CONFIG_ACPI +static struct acpi_device_id rt5645_acpi_match[] = { + { "10EC5645", 0 }, + { "10EC5650", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, rt5645_acpi_match); +#endif + static int rt5645_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -2872,6 +2882,7 @@ static struct i2c_driver rt5645_i2c_driver = { .driver = { .name = "rt5645", .owner = THIS_MODULE, + .acpi_match_table = ACPI_PTR(rt5645_acpi_match), }, .probe = rt5645_i2c_probe, .remove = rt5645_i2c_remove, From 5023281b1870fdc99bddf95a7bc00b801801d13e Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 21 Apr 2015 12:19:49 +0800 Subject: [PATCH 024/337] ASoC: rt5645: Fix mask for setting RT5645_DMIC_2_DP_GPIO12 bit Current code uses wrong mask when setting RT5645_DMIC_2_DP_GPIO12 bit, fix it. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- sound/soc/codecs/rt5645.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 61ca49fbf1ec..be4d741c45ba 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -2780,7 +2780,7 @@ static int rt5645_i2c_probe(struct i2c_client *i2c, case RT5645_DMIC_DATA_GPIO12: regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1, - RT5645_DMIC_1_DP_MASK, RT5645_DMIC_2_DP_GPIO12); + RT5645_DMIC_2_DP_MASK, RT5645_DMIC_2_DP_GPIO12); regmap_update_bits(rt5645->regmap, RT5645_GPIO_CTRL1, RT5645_GP12_PIN_MASK, RT5645_GP12_PIN_DMIC2_SDA); From f30bf2a5cac6c60ab366c4bc6db913597bf4d6ab Mon Sep 17 00:00:00 2001 From: Tommi Rantala Date: Thu, 7 May 2015 15:12:21 +0300 Subject: [PATCH 025/337] ipvs: fix memory leak in ip_vs_ctl.c Fix memory leak introduced in commit a0840e2e165a ("IPVS: netns, ip_vs_ctl local vars moved to ipvs struct."): unreferenced object 0xffff88005785b800 (size 2048): comm "(-localed)", pid 1434, jiffies 4294755650 (age 1421.089s) hex dump (first 32 bytes): bb 89 0b 83 ff ff ff ff b0 78 f0 4e 00 88 ff ff .........x.N.... 04 00 00 00 a4 01 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] kmemleak_alloc+0x4e/0xb0 [] __kmalloc_track_caller+0x244/0x430 [] kmemdup+0x20/0x50 [] ip_vs_control_net_init+0x1f7/0x510 [] __ip_vs_init+0x100/0x250 [] ops_init+0x41/0x190 [] setup_net+0x93/0x150 [] copy_net_ns+0x82/0x140 [] create_new_namespaces+0xfd/0x190 [] unshare_nsproxy_namespaces+0x5a/0xc0 [] SyS_unshare+0x173/0x310 [] system_call_fastpath+0x12/0x6f [] 0xffffffffffffffff Fixes: a0840e2e165a ("IPVS: netns, ip_vs_ctl local vars moved to ipvs struct.") Signed-off-by: Tommi Rantala Acked-by: Julian Anastasov Signed-off-by: Simon Horman --- net/netfilter/ipvs/ip_vs_ctl.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index 49532672f66d..285eae3a1454 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -3823,6 +3823,9 @@ static void __net_exit ip_vs_control_net_cleanup_sysctl(struct net *net) cancel_work_sync(&ipvs->defense_work.work); unregister_net_sysctl_table(ipvs->sysctl_hdr); ip_vs_stop_estimator(net, &ipvs->tot_stats); + + if (!net_eq(net, &init_net)) + kfree(ipvs->sysctl_tbl); } #else From 37815bf866ab6722a47550f8d25ad3f1a16a680c Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Sat, 9 May 2015 03:06:23 +0930 Subject: [PATCH 026/337] module: Call module notifier on failure after complete_formation() The module notifier call chain for MODULE_STATE_COMING was moved up before the parsing of args, into the complete_formation() call. But if the module failed to load after that, the notifier call chain for MODULE_STATE_GOING was never called and that prevented the users of those call chains from cleaning up anything that was allocated. Link: http://lkml.kernel.org/r/554C52B9.9060700@gmail.com Reported-by: Pontus Fuchs Fixes: 4982223e51e8 "module: set nx before marking module MODULE_STATE_COMING" Cc: stable@vger.kernel.org # 3.16+ Signed-off-by: Steven Rostedt Signed-off-by: Rusty Russell --- kernel/module.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/module.c b/kernel/module.c index 42a1d2afb217..cfc9e843a924 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -3370,6 +3370,9 @@ static int load_module(struct load_info *info, const char __user *uargs, module_bug_cleanup(mod); mutex_unlock(&module_mutex); + blocking_notifier_call_chain(&module_notify_list, + MODULE_STATE_GOING, mod); + /* we can't deallocate the module until we clear memory protection */ unset_module_init_ro_nx(mod); unset_module_core_ro_nx(mod); From f94029d8801d7c27a94a3ea6c4967aa33c49c34b Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Mon, 4 May 2015 23:04:14 +0200 Subject: [PATCH 027/337] clk: si5351: Mention clock-names in the binding documentation Since the introduction of clk-si5351 the way we should deal with DT provided clocks has changed from indexed to named clock phandles. Amend the binding documentation to reflect named clock phandles by clock-names property. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Michael Turquette --- Documentation/devicetree/bindings/clock/silabs,si5351.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt index c40711e8e8f7..28b28309f535 100644 --- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt +++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt @@ -17,7 +17,8 @@ Required properties: - #clock-cells: from common clock binding; shall be set to 1. - clocks: from common clock binding; list of parent clock handles, shall be xtal reference clock or xtal and clkin for - si5351c only. + si5351c only. Corresponding clock input names are "xtal" and + "clkin" respectively. - #address-cells: shall be set to 1. - #size-cells: shall be set to 0. @@ -71,6 +72,7 @@ i2c-master-node { /* connect xtal input to 25MHz reference */ clocks = <&ref25>; + clock-names = "xtal"; /* connect xtal input as source of pll0 and pll1 */ silabs,pll-source = <0 0>, <1 0>; From 0cd3be6e9a46f84ef7a42e1a5645d32ad547b12e Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Mon, 4 May 2015 23:04:16 +0200 Subject: [PATCH 028/337] clk: si5351: Do not pass struct clk in platform_data When registering clk-si5351 by platform_data, we should not pass struct clk for the reference clocks. Drop struct clk from platform_data and rework the driver to use devm_clk_get of named clock references. While at it, check for at least one valid input clock and properly prepare/ enable valid reference clocks. Signed-off-by: Sebastian Hesselbarth Reported-by: Michael Welling Reported-by: Jean-Francois Moine Reported-by: Russell King Tested-by: Michael Welling Tested-by: Jean-Francois Moine Signed-off-by: Michael Turquette --- drivers/clk/clk-si5351.c | 63 ++++++++++++++++++++-------- include/linux/platform_data/si5351.h | 4 -- 2 files changed, 45 insertions(+), 22 deletions(-) diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c index 44ea107cfc67..30335d3b99af 100644 --- a/drivers/clk/clk-si5351.c +++ b/drivers/clk/clk-si5351.c @@ -1128,13 +1128,6 @@ static int si5351_dt_parse(struct i2c_client *client, if (!pdata) return -ENOMEM; - pdata->clk_xtal = of_clk_get(np, 0); - if (!IS_ERR(pdata->clk_xtal)) - clk_put(pdata->clk_xtal); - pdata->clk_clkin = of_clk_get(np, 1); - if (!IS_ERR(pdata->clk_clkin)) - clk_put(pdata->clk_clkin); - /* * property silabs,pll-source : , [<..>] * allow to selectively set pll source @@ -1328,8 +1321,22 @@ static int si5351_i2c_probe(struct i2c_client *client, i2c_set_clientdata(client, drvdata); drvdata->client = client; drvdata->variant = variant; - drvdata->pxtal = pdata->clk_xtal; - drvdata->pclkin = pdata->clk_clkin; + drvdata->pxtal = devm_clk_get(&client->dev, "xtal"); + drvdata->pclkin = devm_clk_get(&client->dev, "clkin"); + + if (PTR_ERR(drvdata->pxtal) == -EPROBE_DEFER || + PTR_ERR(drvdata->pclkin) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + /* + * Check for valid parent clock: VARIANT_A and VARIANT_B need XTAL, + * VARIANT_C can have CLKIN instead. + */ + if (IS_ERR(drvdata->pxtal) && + (drvdata->variant != SI5351_VARIANT_C || IS_ERR(drvdata->pclkin))) { + dev_err(&client->dev, "missing parent clock\n"); + return -EINVAL; + } drvdata->regmap = devm_regmap_init_i2c(client, &si5351_regmap_config); if (IS_ERR(drvdata->regmap)) { @@ -1393,6 +1400,11 @@ static int si5351_i2c_probe(struct i2c_client *client, } } + if (!IS_ERR(drvdata->pxtal)) + clk_prepare_enable(drvdata->pxtal); + if (!IS_ERR(drvdata->pclkin)) + clk_prepare_enable(drvdata->pclkin); + /* register xtal input clock gate */ memset(&init, 0, sizeof(init)); init.name = si5351_input_names[0]; @@ -1407,7 +1419,8 @@ static int si5351_i2c_probe(struct i2c_client *client, clk = devm_clk_register(&client->dev, &drvdata->xtal); if (IS_ERR(clk)) { dev_err(&client->dev, "unable to register %s\n", init.name); - return PTR_ERR(clk); + ret = PTR_ERR(clk); + goto err_clk; } /* register clkin input clock gate */ @@ -1425,7 +1438,8 @@ static int si5351_i2c_probe(struct i2c_client *client, if (IS_ERR(clk)) { dev_err(&client->dev, "unable to register %s\n", init.name); - return PTR_ERR(clk); + ret = PTR_ERR(clk); + goto err_clk; } } @@ -1447,7 +1461,8 @@ static int si5351_i2c_probe(struct i2c_client *client, clk = devm_clk_register(&client->dev, &drvdata->pll[0].hw); if (IS_ERR(clk)) { dev_err(&client->dev, "unable to register %s\n", init.name); - return -EINVAL; + ret = PTR_ERR(clk); + goto err_clk; } /* register PLLB or VXCO (Si5351B) */ @@ -1471,7 +1486,8 @@ static int si5351_i2c_probe(struct i2c_client *client, clk = devm_clk_register(&client->dev, &drvdata->pll[1].hw); if (IS_ERR(clk)) { dev_err(&client->dev, "unable to register %s\n", init.name); - return -EINVAL; + ret = PTR_ERR(clk); + goto err_clk; } /* register clk multisync and clk out divider */ @@ -1492,8 +1508,10 @@ static int si5351_i2c_probe(struct i2c_client *client, num_clocks * sizeof(*drvdata->onecell.clks), GFP_KERNEL); if (WARN_ON(!drvdata->msynth || !drvdata->clkout || - !drvdata->onecell.clks)) - return -ENOMEM; + !drvdata->onecell.clks)) { + ret = -ENOMEM; + goto err_clk; + } for (n = 0; n < num_clocks; n++) { drvdata->msynth[n].num = n; @@ -1511,7 +1529,8 @@ static int si5351_i2c_probe(struct i2c_client *client, if (IS_ERR(clk)) { dev_err(&client->dev, "unable to register %s\n", init.name); - return -EINVAL; + ret = PTR_ERR(clk); + goto err_clk; } } @@ -1538,7 +1557,8 @@ static int si5351_i2c_probe(struct i2c_client *client, if (IS_ERR(clk)) { dev_err(&client->dev, "unable to register %s\n", init.name); - return -EINVAL; + ret = PTR_ERR(clk); + goto err_clk; } drvdata->onecell.clks[n] = clk; @@ -1557,10 +1577,17 @@ static int si5351_i2c_probe(struct i2c_client *client, &drvdata->onecell); if (ret) { dev_err(&client->dev, "unable to add clk provider\n"); - return ret; + goto err_clk; } return 0; + +err_clk: + if (!IS_ERR(drvdata->pxtal)) + clk_disable_unprepare(drvdata->pxtal); + if (!IS_ERR(drvdata->pclkin)) + clk_disable_unprepare(drvdata->pclkin); + return ret; } static const struct i2c_device_id si5351_i2c_ids[] = { diff --git a/include/linux/platform_data/si5351.h b/include/linux/platform_data/si5351.h index a947ab8b441a..533d9807e543 100644 --- a/include/linux/platform_data/si5351.h +++ b/include/linux/platform_data/si5351.h @@ -5,8 +5,6 @@ #ifndef __LINUX_PLATFORM_DATA_SI5351_H__ #define __LINUX_PLATFORM_DATA_SI5351_H__ -struct clk; - /** * enum si5351_pll_src - Si5351 pll clock source * @SI5351_PLL_SRC_DEFAULT: default, do not change eeprom config @@ -107,8 +105,6 @@ struct si5351_clkout_config { * @clkout: array of clkout configuration */ struct si5351_platform_data { - struct clk *clk_xtal; - struct clk *clk_clkin; enum si5351_pll_src pll_src[2]; struct si5351_clkout_config clkout[8]; }; From 79010636174c78209e20c4f44370b2b13312e08c Mon Sep 17 00:00:00 2001 From: Keerthy Date: Wed, 22 Apr 2015 18:21:41 +0530 Subject: [PATCH 029/337] thermal: ti-soc-thermal: dra7: Implement Workaround for Errata i814 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Bandgap Temperature read Dtemp can be corrupted DESCRIPTION Read accesses to registers listed below can be corrupted due to incorrect resynchronization between clock domains. Read access to registers below can be corrupted : • CTRL_CORE_DTEMP_MPU/GPU/CORE/DSPEVE/IVA_n (n = 0 to 4) • CTRL_CORE_TEMP_SENSOR_MPU/GPU/CORE/DSPEVE/IVA_n WORKAROUND Multiple reads to CTRL_CORE_TEMP_SENSOR_MPU/GPU/CORE/DSPEVE/IVA[9:0]: BGAP_DTEMPMPU/GPU/CORE/DSPEVE/IVA is needed to discard false value and read right value: 1. Perform two successive reads to BGAP_DTEMP bit field. (a) If read1 returns Val1 and read2 returns Val1, then right value is Val1. (b) If read1 returns Val1, read 2 returns Val2, a third read is needed. 2. Perform third read (a) If read3 returns Val2 then right value is Val2. (b) If read3 returns Val3, then right value is Val3. The above in gist means if val1 and val2 are the same then we can go ahead with that value else we need a third read which will be right since synchronization will be complete by then. Signed-off-by: Keerthy Signed-off-by: Eduardo Valentin --- .../ti-soc-thermal/dra752-thermal-data.c | 3 +- drivers/thermal/ti-soc-thermal/ti-bandgap.c | 37 ++++++++++++++++++- drivers/thermal/ti-soc-thermal/ti-bandgap.h | 4 ++ 3 files changed, 42 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c b/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c index a4929272074f..58b5c6694cd4 100644 --- a/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c +++ b/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c @@ -420,7 +420,8 @@ const struct ti_bandgap_data dra752_data = { TI_BANDGAP_FEATURE_FREEZE_BIT | TI_BANDGAP_FEATURE_TALERT | TI_BANDGAP_FEATURE_COUNTER_DELAY | - TI_BANDGAP_FEATURE_HISTORY_BUFFER, + TI_BANDGAP_FEATURE_HISTORY_BUFFER | + TI_BANDGAP_FEATURE_ERRATA_814, .fclock_name = "l3instr_ts_gclk_div", .div_ck_name = "l3instr_ts_gclk_div", .conv_table = dra752_adc_to_temp, diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c index 62a5d449c388..9747523858a1 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c @@ -118,6 +118,37 @@ exit: return ret; } +/** + * ti_errata814_bandgap_read_temp() - helper function to read dra7 sensor temperature + * @bgp: pointer to ti_bandgap structure + * @reg: desired register (offset) to be read + * + * Function to read dra7 bandgap sensor temperature. This is done separately + * so as to workaround the errata "Bandgap Temperature read Dtemp can be + * corrupted" - Errata ID: i814". + * Read accesses to registers listed below can be corrupted due to incorrect + * resynchronization between clock domains. + * Read access to registers below can be corrupted : + * CTRL_CORE_DTEMP_MPU/GPU/CORE/DSPEVE/IVA_n (n = 0 to 4) + * CTRL_CORE_TEMP_SENSOR_MPU/GPU/CORE/DSPEVE/IVA_n + * + * Return: the register value. + */ +static u32 ti_errata814_bandgap_read_temp(struct ti_bandgap *bgp, u32 reg) +{ + u32 val1, val2; + + val1 = ti_bandgap_readl(bgp, reg); + val2 = ti_bandgap_readl(bgp, reg); + + /* If both times we read the same value then that is right */ + if (val1 == val2) + return val1; + + /* if val1 and val2 are different read it third time */ + return ti_bandgap_readl(bgp, reg); +} + /** * ti_bandgap_read_temp() - helper function to read sensor temperature * @bgp: pointer to ti_bandgap structure @@ -148,7 +179,11 @@ static u32 ti_bandgap_read_temp(struct ti_bandgap *bgp, int id) } /* read temperature */ - temp = ti_bandgap_readl(bgp, reg); + if (TI_BANDGAP_HAS(bgp, ERRATA_814)) + temp = ti_errata814_bandgap_read_temp(bgp, reg); + else + temp = ti_bandgap_readl(bgp, reg); + temp &= tsr->bgap_dtemp_mask; if (TI_BANDGAP_HAS(bgp, FREEZE_BIT)) diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h index b3adf72f252d..b2da3fc42b51 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.h +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h @@ -318,6 +318,9 @@ struct ti_temp_sensor { * TI_BANDGAP_FEATURE_HISTORY_BUFFER - used when the bandgap device features * a history buffer of temperatures. * + * TI_BANDGAP_FEATURE_ERRATA_814 - used to workaorund when the bandgap device + * has Errata 814 + * * TI_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a * specific feature (above) or not. Return non-zero, if yes. */ @@ -331,6 +334,7 @@ struct ti_temp_sensor { #define TI_BANDGAP_FEATURE_FREEZE_BIT BIT(7) #define TI_BANDGAP_FEATURE_COUNTER_DELAY BIT(8) #define TI_BANDGAP_FEATURE_HISTORY_BUFFER BIT(9) +#define TI_BANDGAP_FEATURE_ERRATA_814 BIT(10) #define TI_BANDGAP_HAS(b, f) \ ((b)->conf->features & TI_BANDGAP_FEATURE_ ## f) From e9a90d046b9c9fe8f7c8efefe7b0e64c3c0daa8f Mon Sep 17 00:00:00 2001 From: Keerthy Date: Wed, 22 Apr 2015 18:21:42 +0530 Subject: [PATCH 030/337] thermal: ti-soc-thermal: OMAP5: Implement Workaround for Errata i813 DESCRIPTION Spurious Thermal Alert: Talert can happen randomly while the device remains under the temperature limit defined for this event to trig. This spurious event is caused by a incorrect re-synchronization between clock domains. The comparison between configured threshold and current temperature value can happen while the value is transitioning (metastable), thus causing inappropriate event generation. No spurious event occurs as long as the threshold value stays unchanged. Spurious event can be generated while a thermal alert threshold is modified in CONTROL_BANDGAP_THRESHOLD_MPU/GPU/CORE/DSPEVE/IVA_n. WORKAROUND Spurious event generation can be avoided by performing following sequence when the threshold is modified: 1. Mask the hot/cold events at the thermal IP level. 2. Modify Threshold. 3. Unmask the hot/cold events at the thermal IP level. Signed-off-by: Keerthy Signed-off-by: Eduardo Valentin --- .../ti-soc-thermal/omap5-thermal-data.c | 3 +- drivers/thermal/ti-soc-thermal/ti-bandgap.c | 41 ++++++++++++++++++- drivers/thermal/ti-soc-thermal/ti-bandgap.h | 4 +- 3 files changed, 45 insertions(+), 3 deletions(-) diff --git a/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c index eff0c80fd4af..79ff70c446ba 100644 --- a/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c +++ b/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c @@ -319,7 +319,8 @@ const struct ti_bandgap_data omap5430_data = { TI_BANDGAP_FEATURE_FREEZE_BIT | TI_BANDGAP_FEATURE_TALERT | TI_BANDGAP_FEATURE_COUNTER_DELAY | - TI_BANDGAP_FEATURE_HISTORY_BUFFER, + TI_BANDGAP_FEATURE_HISTORY_BUFFER | + TI_BANDGAP_FEATURE_ERRATA_813, .fclock_name = "l3instr_ts_gclk_div", .div_ck_name = "l3instr_ts_gclk_div", .conv_table = omap5430_adc_to_temp, diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c index 9747523858a1..bc14dc874594 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c @@ -445,7 +445,7 @@ static int ti_bandgap_update_alert_threshold(struct ti_bandgap *bgp, int id, { struct temp_sensor_data *ts_data = bgp->conf->sensors[id].ts_data; struct temp_sensor_registers *tsr; - u32 thresh_val, reg_val, t_hot, t_cold; + u32 thresh_val, reg_val, t_hot, t_cold, ctrl; int err = 0; tsr = bgp->conf->sensors[id].registers; @@ -477,8 +477,47 @@ static int ti_bandgap_update_alert_threshold(struct ti_bandgap *bgp, int id, ~(tsr->threshold_thot_mask | tsr->threshold_tcold_mask); reg_val |= (t_hot << __ffs(tsr->threshold_thot_mask)) | (t_cold << __ffs(tsr->threshold_tcold_mask)); + + /** + * Errata i813: + * Spurious Thermal Alert: Talert can happen randomly while the device + * remains under the temperature limit defined for this event to trig. + * This spurious event is caused by a incorrect re-synchronization + * between clock domains. The comparison between configured threshold + * and current temperature value can happen while the value is + * transitioning (metastable), thus causing inappropriate event + * generation. No spurious event occurs as long as the threshold value + * stays unchanged. Spurious event can be generated while a thermal + * alert threshold is modified in + * CONTROL_BANDGAP_THRESHOLD_MPU/GPU/CORE/DSPEVE/IVA_n. + */ + + if (TI_BANDGAP_HAS(bgp, ERRATA_813)) { + /* Mask t_hot and t_cold events at the IP Level */ + ctrl = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl); + + if (hot) + ctrl &= ~tsr->mask_hot_mask; + else + ctrl &= ~tsr->mask_cold_mask; + + ti_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl); + } + + /* Write the threshold value */ ti_bandgap_writel(bgp, reg_val, tsr->bgap_threshold); + if (TI_BANDGAP_HAS(bgp, ERRATA_813)) { + /* Unmask t_hot and t_cold events at the IP Level */ + ctrl = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl); + if (hot) + ctrl |= tsr->mask_hot_mask; + else + ctrl |= tsr->mask_cold_mask; + + ti_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl); + } + if (err) { dev_err(bgp->dev, "failed to reprogram thot threshold\n"); err = -EIO; diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h index b2da3fc42b51..0c52f7afba00 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.h +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h @@ -320,7 +320,8 @@ struct ti_temp_sensor { * * TI_BANDGAP_FEATURE_ERRATA_814 - used to workaorund when the bandgap device * has Errata 814 - * + * TI_BANDGAP_FEATURE_ERRATA_813 - used to workaorund when the bandgap device + * has Errata 813 * TI_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a * specific feature (above) or not. Return non-zero, if yes. */ @@ -335,6 +336,7 @@ struct ti_temp_sensor { #define TI_BANDGAP_FEATURE_COUNTER_DELAY BIT(8) #define TI_BANDGAP_FEATURE_HISTORY_BUFFER BIT(9) #define TI_BANDGAP_FEATURE_ERRATA_814 BIT(10) +#define TI_BANDGAP_FEATURE_ERRATA_813 BIT(11) #define TI_BANDGAP_HAS(b, f) \ ((b)->conf->features & TI_BANDGAP_FEATURE_ ## f) From efa86858e1d8970411a140fa1e0c4dd18a8f2a89 Mon Sep 17 00:00:00 2001 From: Nadav Haklai Date: Wed, 15 Apr 2015 19:08:08 +0200 Subject: [PATCH 031/337] thermal: armada: Update Armada 380 thermal sensor coefficients Improve the Armada 380 thermal sensor accuracy by using updated formula. The updated formula is: Temperature[C degrees] = 0.4761 * tsen_vsen_out - 279.1 Signed-off-by: Nadav Haklai Signed-off-by: Gregory CLEMENT Cc: #v3.16 Signed-off-by: Eduardo Valentin --- drivers/thermal/armada_thermal.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c index c2556cf5186b..01255fd65135 100644 --- a/drivers/thermal/armada_thermal.c +++ b/drivers/thermal/armada_thermal.c @@ -224,9 +224,9 @@ static const struct armada_thermal_data armada380_data = { .is_valid_shift = 10, .temp_shift = 0, .temp_mask = 0x3ff, - .coef_b = 1169498786UL, - .coef_m = 2000000UL, - .coef_div = 4289, + .coef_b = 2931108200UL, + .coef_m = 5000000UL, + .coef_div = 10502, .inverted = true, }; From 5f0d98f278f943cb6115b6fe4441f11a7015bb50 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 30 Oct 2014 10:19:38 +0200 Subject: [PATCH 032/337] iwlwifi: mvm: forbid MIMO on devices that don't support it There are devices that forbid MIMO by the mean of the NVM. Detect thoses devices and forbid MIMO otherwise the firmware would crash. STBC is still allowed on these devices. Signed-off-by: Emmanuel Grumbach --- .../net/wireless/iwlwifi/iwl-eeprom-parse.c | 5 +++++ .../net/wireless/iwlwifi/iwl-eeprom-parse.h | 3 +++ drivers/net/wireless/iwlwifi/iwl-nvm-parse.c | 19 +++++++++++++------ drivers/net/wireless/iwlwifi/mvm/rs.c | 3 +++ 4 files changed, 24 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c index 41ff85de7334..21302b6f2bfd 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c @@ -6,6 +6,7 @@ * GPL LICENSE SUMMARY * * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved. + * Copyright(c) 2015 Intel Mobile Communications GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -31,6 +32,7 @@ * BSD LICENSE * * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. + * Copyright(c) 2015 Intel Mobile Communications GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -748,6 +750,9 @@ void iwl_init_ht_hw_capab(const struct iwl_cfg *cfg, return; } + if (data->sku_cap_mimo_disabled) + rx_chains = 1; + ht_info->ht_supported = true; ht_info->cap = IEEE80211_HT_CAP_DSSSCCK40; diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.h b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.h index 5234a0bf11e4..750c8c9ee70d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.h +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.h @@ -6,6 +6,7 @@ * GPL LICENSE SUMMARY * * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved. + * Copyright(c) 2015 Intel Mobile Communications GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -31,6 +32,7 @@ * BSD LICENSE * * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. + * Copyright(c) 2015 Intel Mobile Communications GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -84,6 +86,7 @@ struct iwl_nvm_data { bool sku_cap_11ac_enable; bool sku_cap_amt_enable; bool sku_cap_ipan_enable; + bool sku_cap_mimo_disabled; u16 radio_cfg_type; u8 radio_cfg_step; diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c index 83903a5025c2..cf86f3cdbb8e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c +++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c @@ -6,7 +6,7 @@ * GPL LICENSE SUMMARY * * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -32,7 +32,7 @@ * BSD LICENSE * * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -116,10 +116,11 @@ enum family_8000_nvm_offsets { /* SKU Capabilities (actual values from NVM definition) */ enum nvm_sku_bits { - NVM_SKU_CAP_BAND_24GHZ = BIT(0), - NVM_SKU_CAP_BAND_52GHZ = BIT(1), - NVM_SKU_CAP_11N_ENABLE = BIT(2), - NVM_SKU_CAP_11AC_ENABLE = BIT(3), + NVM_SKU_CAP_BAND_24GHZ = BIT(0), + NVM_SKU_CAP_BAND_52GHZ = BIT(1), + NVM_SKU_CAP_11N_ENABLE = BIT(2), + NVM_SKU_CAP_11AC_ENABLE = BIT(3), + NVM_SKU_CAP_MIMO_DISABLE = BIT(5), }; /* @@ -368,6 +369,11 @@ static void iwl_init_vht_hw_capab(const struct iwl_cfg *cfg, if (cfg->ht_params->ldpc) vht_cap->cap |= IEEE80211_VHT_CAP_RXLDPC; + if (data->sku_cap_mimo_disabled) { + num_rx_ants = 1; + num_tx_ants = 1; + } + if (num_tx_ants > 1) vht_cap->cap |= IEEE80211_VHT_CAP_TXSTBC; else @@ -610,6 +616,7 @@ iwl_parse_nvm_data(struct device *dev, const struct iwl_cfg *cfg, data->sku_cap_11n_enable = false; data->sku_cap_11ac_enable = data->sku_cap_11n_enable && (sku & NVM_SKU_CAP_11AC_ENABLE); + data->sku_cap_mimo_disabled = sku & NVM_SKU_CAP_MIMO_DISABLE; data->n_hw_addrs = iwl_get_n_hw_addrs(cfg, nvm_sw); diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c index f9928f2c125f..33cd68ae7bf9 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/iwlwifi/mvm/rs.c @@ -180,6 +180,9 @@ static bool rs_mimo_allow(struct iwl_mvm *mvm, struct ieee80211_sta *sta, if (iwl_mvm_vif_low_latency(mvmvif) && mvmsta->vif->p2p) return false; + if (mvm->nvm_data->sku_cap_mimo_disabled) + return false; + return true; } From 17d489019c5249d059768184c80e9b2b0269b81e Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 29 Apr 2015 14:49:07 +1000 Subject: [PATCH 033/337] KVM: PPC: Book3S HV: Fix list traversal in error case This fixes a regression introduced in commit 25fedfca94cf, "KVM: PPC: Book3S HV: Move vcore preemption point up into kvmppc_run_vcpu", which leads to a user-triggerable oops. In the case where we try to run a vcore on a physical core that is not in single-threaded mode, or the vcore has too many threads for the physical core, we iterate the list of runnable vcpus to make each one return an EBUSY error to userspace. Since this involves taking each vcpu off the runnable_threads list for the vcore, we need to use list_for_each_entry_safe rather than list_for_each_entry to traverse the list. Otherwise the kernel will crash with an oops message like this: Unable to handle kernel paging request for data at address 0x000fff88 Faulting instruction address: 0xd00000001e635dc8 Oops: Kernel access of bad area, sig: 11 [#2] SMP NR_CPUS=1024 NUMA PowerNV ... CPU: 48 PID: 91256 Comm: qemu-system-ppc Tainted: G D 3.18.0 #1 task: c00000274e507500 ti: c0000027d1924000 task.ti: c0000027d1924000 NIP: d00000001e635dc8 LR: d00000001e635df8 CTR: c00000000011ba50 REGS: c0000027d19275b0 TRAP: 0300 Tainted: G D (3.18.0) MSR: 9000000000009033 CR: 22002824 XER: 00000000 CFAR: c000000000008468 DAR: 00000000000fff88 DSISR: 40000000 SOFTE: 1 GPR00: d00000001e635df8 c0000027d1927830 d00000001e64c850 0000000000000001 GPR04: 0000000000000001 0000000000000001 0000000000000000 0000000000000000 GPR08: 0000000000200200 0000000000000000 0000000000000000 d00000001e63e588 GPR12: 0000000000002200 c000000007dbc800 c000000fc7800000 000000000000000a GPR16: fffffffffffffffc c000000fd5439690 c000000fc7801c98 0000000000000001 GPR20: 0000000000000003 c0000027d1927aa8 c000000fd543b348 c000000fd543b350 GPR24: 0000000000000000 c000000fa57f0000 0000000000000030 0000000000000000 GPR28: fffffffffffffff0 c000000fd543b328 00000000000fe468 c000000fd543b300 NIP [d00000001e635dc8] kvmppc_run_core+0x198/0x17c0 [kvm_hv] LR [d00000001e635df8] kvmppc_run_core+0x1c8/0x17c0 [kvm_hv] Call Trace: [c0000027d1927830] [d00000001e635df8] kvmppc_run_core+0x1c8/0x17c0 [kvm_hv] (unreliable) [c0000027d1927a30] [d00000001e638350] kvmppc_vcpu_run_hv+0x5b0/0xdd0 [kvm_hv] [c0000027d1927b70] [d00000001e510504] kvmppc_vcpu_run+0x44/0x60 [kvm] [c0000027d1927ba0] [d00000001e50d4a4] kvm_arch_vcpu_ioctl_run+0x64/0x170 [kvm] [c0000027d1927be0] [d00000001e504be8] kvm_vcpu_ioctl+0x5e8/0x7a0 [kvm] [c0000027d1927d40] [c0000000002d6720] do_vfs_ioctl+0x490/0x780 [c0000027d1927de0] [c0000000002d6ae4] SyS_ioctl+0xd4/0xf0 [c0000027d1927e30] [c000000000009358] syscall_exit+0x0/0x98 Instruction dump: 60000000 60420000 387e1b30 38800003 38a00001 38c00000 480087d9 e8410018 ebde1c98 7fbdf040 3bdee368 419e0048 <813e1b20> 939e1b18 2f890001 409effcc ---[ end trace 8cdf50251cca6680 ]--- Fixes: 25fedfca94cfbf2461314c6c34ef58e74a31b025 Signed-off-by: Paul Mackerras Reviewed-by: Alexander Graf Signed-off-by: Paolo Bonzini --- arch/powerpc/kvm/book3s_hv.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 48d3c5d2ecc9..df81caab7383 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -1952,7 +1952,7 @@ static void post_guest_process(struct kvmppc_vcore *vc) */ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc) { - struct kvm_vcpu *vcpu; + struct kvm_vcpu *vcpu, *vnext; int i; int srcu_idx; @@ -1982,7 +1982,8 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc) */ if ((threads_per_core > 1) && ((vc->num_threads > threads_per_subcore) || !on_primary_thread())) { - list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) { + list_for_each_entry_safe(vcpu, vnext, &vc->runnable_threads, + arch.run_list) { vcpu->arch.ret = -EBUSY; kvmppc_remove_runnable(vc, vcpu); wake_up(&vcpu->arch.cpu_run); From f5d0684e848f01347ba510545822c205889f8acc Mon Sep 17 00:00:00 2001 From: Sachin Prabhu Date: Thu, 2 Apr 2015 14:51:35 +0100 Subject: [PATCH 034/337] cifs: Don't replace dentries for dfs mounts MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Doing a readdir on a dfs root can result in the dentries for directories with a dfs share mounted being replaced by new dentries for objects returned by the readdir call. These new dentries on shares mounted with unix extenstions show up as symlinks pointing to the dfs share. # mount -t cifs -o sec=none //vm140-31/dfsroot cifs # stat cifs/testlink/testfile; ls -l cifs File: ‘cifs/testlink/testfile’ Size: 0 Blocks: 0 IO Block: 16384 regular empty file Device: 27h/39d Inode: 130120 Links: 1 Access: (0644/-rw-r--r--) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2015-03-31 13:55:50.106018200 +0100 Modify: 2015-03-31 13:55:50.106018200 +0100 Change: 2015-03-31 13:55:50.106018200 +0100 Birth: - total 0 drwxr-xr-x 2 root root 0 Mar 31 13:54 testdir lrwxrwxrwx 1 root root 19 Mar 24 14:25 testlink -> \vm140-31\test In the example above, the stat command mounts the dfs share at cifs/testlink. The subsequent ls on the dfsroot directory replaces the dentry for testlink with a symlink. In the earlier code, the d_invalidate command returned an -EBUSY error when attempting to invalidate directories. This stopped the code from replacing the directories with symlinks returned by the readdir call. Changes were recently made to the d_invalidate() command so that it no longer returns an error code. This results in the directory with the mounted dfs share being replaced by a symlink which denotes a dfs share. Signed-off-by: Sachin Prabhu Reviewed-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/readdir.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index b4a47237486b..b1eede3678a9 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -90,6 +90,8 @@ cifs_prime_dcache(struct dentry *parent, struct qstr *name, if (dentry) { inode = d_inode(dentry); if (inode) { + if (d_mountpoint(dentry)) + goto out; /* * If we're generating inode numbers, then we don't * want to clobber the existing one with the one that From bc8ebdc4f54cc944b0ecc0fb0d18b0ffbaab0468 Mon Sep 17 00:00:00 2001 From: Nakajima Akira Date: Fri, 13 Feb 2015 15:35:58 +0900 Subject: [PATCH 035/337] Fix that several functions handle incorrect value of mapchars Cifs client has problem with reserved chars filename. [BUG1] : several functions handle incorrect value of mapchars - cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); + cifs_remap(cifs_sb)); [BUG2] : forget to convert reserved chars when creating SymbolicLink. - CIFSUnixCreateSymLink() calls cifs_strtoUTF16 + CIFSUnixCreateSymLink() calls cifsConvertToUTF16() with remap [BUG3] : forget to convert reserved chars when getting SymbolicLink. - CIFSSMBUnixQuerySymLink() calls cifs_strtoUTF16 + CIFSSMBUnixQuerySymLink() calls cifsConvertToUTF16() with remap [BUG4] : /proc/mounts don't show "mapposix" when using mapposix mount option + cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SFM_CHR) + seq_puts(s, ",mapposix"); Reported-by: t.wede@kw-reneg.de Reported-by: Nakajima Akira Signed-off-by: Nakajima Akira Signed-off-by: Carl Schaefer Signed-off-by: Steve French --- fs/cifs/cifs_dfs_ref.c | 3 ++- fs/cifs/cifsfs.c | 2 ++ fs/cifs/cifsproto.h | 4 ++-- fs/cifs/cifssmb.c | 21 +++++++++++---------- fs/cifs/dir.c | 3 +-- fs/cifs/file.c | 3 +-- fs/cifs/inode.c | 6 ++---- fs/cifs/link.c | 3 ++- fs/cifs/smb1ops.c | 3 ++- 9 files changed, 25 insertions(+), 23 deletions(-) diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index 430e0348c99e..7dc886c9a78f 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -24,6 +24,7 @@ #include "cifsfs.h" #include "dns_resolve.h" #include "cifs_debug.h" +#include "cifs_unicode.h" static LIST_HEAD(cifs_dfs_automount_list); @@ -312,7 +313,7 @@ static struct vfsmount *cifs_dfs_do_automount(struct dentry *mntpt) xid = get_xid(); rc = get_dfs_path(xid, ses, full_path + 1, cifs_sb->local_nls, &num_referrals, &referrals, - cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); + cifs_remap(cifs_sb)); free_xid(xid); cifs_put_tlink(tlink); diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index f5089bde3635..0a9fb6b53126 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -469,6 +469,8 @@ cifs_show_options(struct seq_file *s, struct dentry *root) seq_puts(s, ",nouser_xattr"); if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR) seq_puts(s, ",mapchars"); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SFM_CHR) + seq_puts(s, ",mapposix"); if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) seq_puts(s, ",sfu"); if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index c31ce98c1704..c63fd1dde25b 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -361,11 +361,11 @@ extern int CIFSUnixCreateHardLink(const unsigned int xid, extern int CIFSUnixCreateSymLink(const unsigned int xid, struct cifs_tcon *tcon, const char *fromName, const char *toName, - const struct nls_table *nls_codepage); + const struct nls_table *nls_codepage, int remap); extern int CIFSSMBUnixQuerySymLink(const unsigned int xid, struct cifs_tcon *tcon, const unsigned char *searchName, char **syminfo, - const struct nls_table *nls_codepage); + const struct nls_table *nls_codepage, int remap); extern int CIFSSMBQuerySymLink(const unsigned int xid, struct cifs_tcon *tcon, __u16 fid, char **symlinkinfo, const struct nls_table *nls_codepage); diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 84650a51c7c4..1091affba425 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -2784,7 +2784,7 @@ copyRetry: int CIFSUnixCreateSymLink(const unsigned int xid, struct cifs_tcon *tcon, const char *fromName, const char *toName, - const struct nls_table *nls_codepage) + const struct nls_table *nls_codepage, int remap) { TRANSACTION2_SPI_REQ *pSMB = NULL; TRANSACTION2_SPI_RSP *pSMBr = NULL; @@ -2804,9 +2804,9 @@ createSymLinkRetry: if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { name_len = - cifs_strtoUTF16((__le16 *) pSMB->FileName, fromName, - /* find define for this maxpathcomponent */ - PATH_MAX, nls_codepage); + cifsConvertToUTF16((__le16 *) pSMB->FileName, fromName, + /* find define for this maxpathcomponent */ + PATH_MAX, nls_codepage, remap); name_len++; /* trailing null */ name_len *= 2; @@ -2828,9 +2828,9 @@ createSymLinkRetry: data_offset = (char *) (&pSMB->hdr.Protocol) + offset; if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { name_len_target = - cifs_strtoUTF16((__le16 *) data_offset, toName, PATH_MAX - /* find define for this maxpathcomponent */ - , nls_codepage); + cifsConvertToUTF16((__le16 *) data_offset, toName, + /* find define for this maxpathcomponent */ + PATH_MAX, nls_codepage, remap); name_len_target++; /* trailing null */ name_len_target *= 2; } else { /* BB improve the check for buffer overruns BB */ @@ -3034,7 +3034,7 @@ winCreateHardLinkRetry: int CIFSSMBUnixQuerySymLink(const unsigned int xid, struct cifs_tcon *tcon, const unsigned char *searchName, char **symlinkinfo, - const struct nls_table *nls_codepage) + const struct nls_table *nls_codepage, int remap) { /* SMB_QUERY_FILE_UNIX_LINK */ TRANSACTION2_QPI_REQ *pSMB = NULL; @@ -3055,8 +3055,9 @@ querySymLinkRetry: if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { name_len = - cifs_strtoUTF16((__le16 *) pSMB->FileName, searchName, - PATH_MAX, nls_codepage); + cifsConvertToUTF16((__le16 *) pSMB->FileName, + searchName, PATH_MAX, nls_codepage, + remap); name_len++; /* trailing null */ name_len *= 2; } else { /* BB improve the check for buffer overruns BB */ diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index 338d56936f6a..c3eb998a99bd 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -620,8 +620,7 @@ int cifs_mknod(struct inode *inode, struct dentry *direntry, umode_t mode, } rc = CIFSSMBUnixSetPathInfo(xid, tcon, full_path, &args, cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); + cifs_remap(cifs_sb)); if (rc) goto mknod_out; diff --git a/fs/cifs/file.c b/fs/cifs/file.c index cafbf10521d5..5cfa7129d876 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -140,8 +140,7 @@ int cifs_posix_open(char *full_path, struct inode **pinode, posix_flags = cifs_posix_convert_flags(f_flags); rc = CIFSPOSIXCreate(xid, tcon, posix_flags, mode, pnetfid, presp_data, poplock, full_path, cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); + cifs_remap(cifs_sb)); cifs_put_tlink(tlink); if (rc) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 55b58112d122..ef71aa1515f6 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -373,8 +373,7 @@ int cifs_get_inode_info_unix(struct inode **pinode, /* could have done a find first instead but this returns more info */ rc = CIFSSMBUnixQPathInfo(xid, tcon, full_path, &find_data, - cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); + cifs_sb->local_nls, cifs_remap(cifs_sb)); cifs_put_tlink(tlink); if (!rc) { @@ -2215,8 +2214,7 @@ cifs_setattr_unix(struct dentry *direntry, struct iattr *attrs) pTcon = tlink_tcon(tlink); rc = CIFSSMBUnixSetPathInfo(xid, pTcon, full_path, args, cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); + cifs_remap(cifs_sb)); cifs_put_tlink(tlink); } diff --git a/fs/cifs/link.c b/fs/cifs/link.c index 252e672d5604..e6c707cc62b3 100644 --- a/fs/cifs/link.c +++ b/fs/cifs/link.c @@ -717,7 +717,8 @@ cifs_symlink(struct inode *inode, struct dentry *direntry, const char *symname) rc = create_mf_symlink(xid, pTcon, cifs_sb, full_path, symname); else if (pTcon->unix_ext) rc = CIFSUnixCreateSymLink(xid, pTcon, full_path, symname, - cifs_sb->local_nls); + cifs_sb->local_nls, + cifs_remap(cifs_sb)); /* else rc = CIFSCreateReparseSymLink(xid, pTcon, fromName, toName, cifs_sb_target->local_nls); */ diff --git a/fs/cifs/smb1ops.c b/fs/cifs/smb1ops.c index 7bfdd6066276..fc537c29044e 100644 --- a/fs/cifs/smb1ops.c +++ b/fs/cifs/smb1ops.c @@ -960,7 +960,8 @@ cifs_query_symlink(const unsigned int xid, struct cifs_tcon *tcon, /* Check for unix extensions */ if (cap_unix(tcon->ses)) { rc = CIFSSMBUnixQuerySymLink(xid, tcon, full_path, target_path, - cifs_sb->local_nls); + cifs_sb->local_nls, + cifs_remap(cifs_sb)); if (rc == -EREMOTE) rc = cifs_unix_dfs_readlink(xid, tcon, full_path, target_path, From 9b5a4e395c2f39fae89f75e4a749be5dba342d22 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Mon, 11 May 2015 14:04:14 +0200 Subject: [PATCH 036/337] ALSA: hda - Add headset mic quirk for Dell Inspiron 5548 This enables the headset microphone on Dell Inspiron 5548, or at least some variants of it. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1452175 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 4a0a238c9864..37c2c9f91df0 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5346,6 +5346,13 @@ static const struct snd_hda_pin_quirk alc269_pin_fixup_tbl[] = { {0x17, 0x40000000}, {0x1d, 0x40700001}, {0x21, 0x02211050}), + SND_HDA_PIN_QUIRK(0x10ec0255, 0x1028, "Dell Inspiron 5548", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, + ALC255_STANDARD_PINS, + {0x12, 0x90a60180}, + {0x14, 0x90170130}, + {0x17, 0x40000000}, + {0x1d, 0x40700001}, + {0x21, 0x02211040}), SND_HDA_PIN_QUIRK(0x10ec0256, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, ALC256_STANDARD_PINS, {0x13, 0x40000000}), From 47b4e1fc4972cc43a19121bc2608a60aef3bf216 Mon Sep 17 00:00:00 2001 From: Janusz Dziedzic Date: Mon, 11 May 2015 11:31:15 +0200 Subject: [PATCH 037/337] mac80211: move WEP tailroom size check Remove checking tailroom when adding IV as it uses only headroom, and move the check to the ICV generation that actually needs the tailroom. In other case I hit such warning and datapath don't work, when testing: - IBSS + WEP - ath9k with hw crypt enabled - IPv6 data (ping6) WARNING: CPU: 3 PID: 13301 at net/mac80211/wep.c:102 ieee80211_wep_add_iv+0x129/0x190 [mac80211]() [...] Call Trace: [] dump_stack+0x45/0x57 [] warn_slowpath_common+0x8a/0xc0 [] warn_slowpath_null+0x1a/0x20 [] ieee80211_wep_add_iv+0x129/0x190 [mac80211] [] ieee80211_crypto_wep_encrypt+0x6b/0xd0 [mac80211] [] invoke_tx_handlers+0xc51/0xf30 [mac80211] [...] Cc: stable@vger.kernel.org Signed-off-by: Janusz Dziedzic Signed-off-by: Johannes Berg --- net/mac80211/wep.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/mac80211/wep.c b/net/mac80211/wep.c index a4220e92f0cc..efa3f48f1ec5 100644 --- a/net/mac80211/wep.c +++ b/net/mac80211/wep.c @@ -98,8 +98,7 @@ static u8 *ieee80211_wep_add_iv(struct ieee80211_local *local, hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PROTECTED); - if (WARN_ON(skb_tailroom(skb) < IEEE80211_WEP_ICV_LEN || - skb_headroom(skb) < IEEE80211_WEP_IV_LEN)) + if (WARN_ON(skb_headroom(skb) < IEEE80211_WEP_IV_LEN)) return NULL; hdrlen = ieee80211_hdrlen(hdr->frame_control); @@ -167,6 +166,9 @@ int ieee80211_wep_encrypt(struct ieee80211_local *local, size_t len; u8 rc4key[3 + WLAN_KEY_LEN_WEP104]; + if (WARN_ON(skb_tailroom(skb) < IEEE80211_WEP_ICV_LEN)) + return -1; + iv = ieee80211_wep_add_iv(local, skb, keylen, keyidx); if (!iv) return -1; From 7cbeed9bce7580479bb97457dad220cb3594b875 Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Thu, 7 May 2015 16:20:15 +0800 Subject: [PATCH 038/337] KVM: MMU: fix smap permission check Current permission check assumes that RSVD bit in PFEC is always zero, however, it is not true since MMIO #PF will use it to quickly identify MMIO access Fix it by clearing the bit if walking guest page table is needed Signed-off-by: Xiao Guangrong Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- arch/x86/kvm/mmu.h | 2 ++ arch/x86/kvm/paging_tmpl.h | 7 +++++++ 2 files changed, 9 insertions(+) diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h index c7d65637c851..06eb2fc1bab8 100644 --- a/arch/x86/kvm/mmu.h +++ b/arch/x86/kvm/mmu.h @@ -166,6 +166,8 @@ static inline bool permission_fault(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu, int index = (pfec >> 1) + (smap >> (X86_EFLAGS_AC_BIT - PFERR_RSVD_BIT + 1)); + WARN_ON(pfec & PFERR_RSVD_MASK); + return (mmu->permissions[index] >> pte_access) & 1; } diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h index fd49c867b25a..6e6d115fe9b5 100644 --- a/arch/x86/kvm/paging_tmpl.h +++ b/arch/x86/kvm/paging_tmpl.h @@ -718,6 +718,13 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr, u32 error_code, mmu_is_nested(vcpu)); if (likely(r != RET_MMIO_PF_INVALID)) return r; + + /* + * page fault with PFEC.RSVD = 1 is caused by shadow + * page fault, should not be used to walk guest page + * table. + */ + error_code &= ~PFERR_RSVD_MASK; }; r = mmu_topup_memory_caches(vcpu); From 898761158be7682082955e3efa4ad24725305fc7 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 2 Apr 2015 11:04:05 +0200 Subject: [PATCH 039/337] KVM: MMU: fix CR4.SMEP=1, CR0.WP=0 with shadow pages smep_andnot_wp is initialized in kvm_init_shadow_mmu and shadow pages should not be reused for different values of it. Thus, it has to be added to the mask in kvm_mmu_pte_write. Reviewed-by: Xiao Guangrong Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- arch/x86/kvm/mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index d43867c33bc4..209fe1477465 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -4238,7 +4238,7 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa, ++vcpu->kvm->stat.mmu_pte_write; kvm_mmu_audit(vcpu, AUDIT_PRE_PTE_WRITE); - mask.cr0_wp = mask.cr4_pae = mask.nxe = 1; + mask.cr0_wp = mask.cr4_pae = mask.nxe = mask.smep_andnot_wp = 1; for_each_gfn_indirect_valid_sp(vcpu->kvm, sp, gfn) { if (detect_write_misaligned(sp, gpa, bytes) || detect_write_flooding(sp)) { From 0be0226f07d14b153a5eedf2bb86e1eb7dcefab5 Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Mon, 11 May 2015 22:55:21 +0800 Subject: [PATCH 040/337] KVM: MMU: fix SMAP virtualization KVM may turn a user page to a kernel page when kernel writes a readonly user page if CR0.WP = 1. This shadow page entry will be reused after SMAP is enabled so that kernel is allowed to access this user page Fix it by setting SMAP && !CR0.WP into shadow page's role and reset mmu once CR4.SMAP is updated Signed-off-by: Xiao Guangrong Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- Documentation/virtual/kvm/mmu.txt | 18 ++++++++++++++---- arch/x86/include/asm/kvm_host.h | 1 + arch/x86/kvm/mmu.c | 16 ++++++++++++---- arch/x86/kvm/mmu.h | 2 -- arch/x86/kvm/x86.c | 8 +++----- 5 files changed, 30 insertions(+), 15 deletions(-) diff --git a/Documentation/virtual/kvm/mmu.txt b/Documentation/virtual/kvm/mmu.txt index 53838d9c6295..c59bd9bc41ef 100644 --- a/Documentation/virtual/kvm/mmu.txt +++ b/Documentation/virtual/kvm/mmu.txt @@ -169,6 +169,10 @@ Shadow pages contain the following information: Contains the value of cr4.smep && !cr0.wp for which the page is valid (pages for which this is true are different from other pages; see the treatment of cr0.wp=0 below). + role.smap_andnot_wp: + Contains the value of cr4.smap && !cr0.wp for which the page is valid + (pages for which this is true are different from other pages; see the + treatment of cr0.wp=0 below). gfn: Either the guest page table containing the translations shadowed by this page, or the base page frame for linear translations. See role.direct. @@ -344,10 +348,16 @@ on fault type: (user write faults generate a #PF) -In the first case there is an additional complication if CR4.SMEP is -enabled: since we've turned the page into a kernel page, the kernel may now -execute it. We handle this by also setting spte.nx. If we get a user -fetch or read fault, we'll change spte.u=1 and spte.nx=gpte.nx back. +In the first case there are two additional complications: +- if CR4.SMEP is enabled: since we've turned the page into a kernel page, + the kernel may now execute it. We handle this by also setting spte.nx. + If we get a user fetch or read fault, we'll change spte.u=1 and + spte.nx=gpte.nx back. +- if CR4.SMAP is disabled: since the page has been changed to a kernel + page, it can not be reused when CR4.SMAP is enabled. We set + CR4.SMAP && !CR0.WP into shadow page's role to avoid this case. Note, + here we do not care the case that CR4.SMAP is enabled since KVM will + directly inject #PF to guest due to failed permission check. To prevent an spte that was converted into a kernel page with cr0.wp=0 from being written by the kernel after cr0.wp has changed to 1, we make diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index dea2e7e962e3..e61c3a4ee131 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -207,6 +207,7 @@ union kvm_mmu_page_role { unsigned nxe:1; unsigned cr0_wp:1; unsigned smep_andnot_wp:1; + unsigned smap_andnot_wp:1; }; }; diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 209fe1477465..44a7d2515497 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -3736,8 +3736,8 @@ static void reset_rsvds_bits_mask_ept(struct kvm_vcpu *vcpu, } } -void update_permission_bitmask(struct kvm_vcpu *vcpu, - struct kvm_mmu *mmu, bool ept) +static void update_permission_bitmask(struct kvm_vcpu *vcpu, + struct kvm_mmu *mmu, bool ept) { unsigned bit, byte, pfec; u8 map; @@ -3918,6 +3918,7 @@ static void init_kvm_tdp_mmu(struct kvm_vcpu *vcpu) void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu) { bool smep = kvm_read_cr4_bits(vcpu, X86_CR4_SMEP); + bool smap = kvm_read_cr4_bits(vcpu, X86_CR4_SMAP); struct kvm_mmu *context = &vcpu->arch.mmu; MMU_WARN_ON(VALID_PAGE(context->root_hpa)); @@ -3936,6 +3937,8 @@ void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu) context->base_role.cr0_wp = is_write_protection(vcpu); context->base_role.smep_andnot_wp = smep && !is_write_protection(vcpu); + context->base_role.smap_andnot_wp + = smap && !is_write_protection(vcpu); } EXPORT_SYMBOL_GPL(kvm_init_shadow_mmu); @@ -4207,12 +4210,18 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa, const u8 *new, int bytes) { gfn_t gfn = gpa >> PAGE_SHIFT; - union kvm_mmu_page_role mask = { .word = 0 }; struct kvm_mmu_page *sp; LIST_HEAD(invalid_list); u64 entry, gentry, *spte; int npte; bool remote_flush, local_flush, zap_page; + union kvm_mmu_page_role mask = (union kvm_mmu_page_role) { + .cr0_wp = 1, + .cr4_pae = 1, + .nxe = 1, + .smep_andnot_wp = 1, + .smap_andnot_wp = 1, + }; /* * If we don't have indirect shadow pages, it means no page is @@ -4238,7 +4247,6 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa, ++vcpu->kvm->stat.mmu_pte_write; kvm_mmu_audit(vcpu, AUDIT_PRE_PTE_WRITE); - mask.cr0_wp = mask.cr4_pae = mask.nxe = mask.smep_andnot_wp = 1; for_each_gfn_indirect_valid_sp(vcpu->kvm, sp, gfn) { if (detect_write_misaligned(sp, gpa, bytes) || detect_write_flooding(sp)) { diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h index 06eb2fc1bab8..0ada65ecddcf 100644 --- a/arch/x86/kvm/mmu.h +++ b/arch/x86/kvm/mmu.h @@ -71,8 +71,6 @@ enum { int handle_mmio_page_fault_common(struct kvm_vcpu *vcpu, u64 addr, bool direct); void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu); void kvm_init_shadow_ept_mmu(struct kvm_vcpu *vcpu, bool execonly); -void update_permission_bitmask(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu, - bool ept); static inline unsigned int kvm_mmu_available_pages(struct kvm *kvm) { diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index c73efcd03e29..986b3f5d0523 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -702,8 +702,9 @@ EXPORT_SYMBOL_GPL(kvm_set_xcr); int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4) { unsigned long old_cr4 = kvm_read_cr4(vcpu); - unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | - X86_CR4_PAE | X86_CR4_SMEP; + unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PAE | + X86_CR4_SMEP | X86_CR4_SMAP; + if (cr4 & CR4_RESERVED_BITS) return 1; @@ -744,9 +745,6 @@ int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4) (!(cr4 & X86_CR4_PCIDE) && (old_cr4 & X86_CR4_PCIDE))) kvm_mmu_reset_context(vcpu); - if ((cr4 ^ old_cr4) & X86_CR4_SMAP) - update_permission_bitmask(vcpu, vcpu->arch.walk_mmu, false); - if ((cr4 ^ old_cr4) & X86_CR4_OSXSAVE) kvm_update_cpuid(vcpu); From dc45708ca9988656d706940df5fd102672c5de92 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Fri, 1 May 2015 11:03:02 -0700 Subject: [PATCH 041/337] storvsc: Set the SRB flags correctly when no data transfer is needed Set the SRB flags correctly when there is no data transfer. Without this change some IHV drivers will fail valid commands such as TEST_UNIT_READY. Cc: Signed-off-by: K. Y. Srinivasan Reviewed-by: Long Li Signed-off-by: James Bottomley --- drivers/scsi/storvsc_drv.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c index d9dad90344d5..3c6584ff65c1 100644 --- a/drivers/scsi/storvsc_drv.c +++ b/drivers/scsi/storvsc_drv.c @@ -1600,8 +1600,7 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd) break; default: vm_srb->data_in = UNKNOWN_TYPE; - vm_srb->win8_extension.srb_flags |= (SRB_FLAGS_DATA_IN | - SRB_FLAGS_DATA_OUT); + vm_srb->win8_extension.srb_flags |= SRB_FLAGS_NO_DATA_TRANSFER; break; } From 8b2564ec7410928639db5c09a34d7d8330f1d759 Mon Sep 17 00:00:00 2001 From: Alexey Kardashevskiy Date: Tue, 28 Apr 2015 18:26:22 +1000 Subject: [PATCH 042/337] lpfc: Fix breakage on big endian kernels This reverts 4fbdf9cb it breaks LPFC on POWER7 machine, big endian kernel. Without this, the kernel enters an infinite oops loop. This is the hardware used for verification: 0005:01:00.0 Fibre Channel [0c04]: Emulex Corporation Saturn-X: LightPulse Fibre Channel Host Adapter [10df:f100] (rev 03) 0005:01:00.1 Fibre Channel [0c04]: Emulex Corporation Saturn-X: LightPulse Fibre Channel Host Adapter [10df:f100] (rev 03) Signed-off-by: Alexey Kardashevskiy Reviewed-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_scsi.c | 41 ++++++++++++++++++----------------- 1 file changed, 21 insertions(+), 20 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index cb73cf9e9ba5..c140f99772ca 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -1129,25 +1129,6 @@ lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) phba->lpfc_release_scsi_buf(phba, psb); } -/** - * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB - * @data: A pointer to the immediate command data portion of the IOCB. - * @fcp_cmnd: The FCP Command that is provided by the SCSI layer. - * - * The routine copies the entire FCP command from @fcp_cmnd to @data while - * byte swapping the data to big endian format for transmission on the wire. - **/ -static void -lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd) -{ - int i, j; - - for (i = 0, j = 0; i < sizeof(struct fcp_cmnd); - i += sizeof(uint32_t), j++) { - ((uint32_t *)data)[j] = cpu_to_be32(((uint32_t *)fcp_cmnd)[j]); - } -} - /** * lpfc_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec * @phba: The Hba for which this call is being executed. @@ -1283,7 +1264,6 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) * we need to set word 4 of IOCB here */ iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd); - lpfc_fcpcmd_to_iocb(iocb_cmd->unsli3.fcp_ext.icd, fcp_cmnd); return 0; } @@ -4146,6 +4126,24 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, lpfc_release_scsi_buf(phba, lpfc_cmd); } +/** + * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB + * @data: A pointer to the immediate command data portion of the IOCB. + * @fcp_cmnd: The FCP Command that is provided by the SCSI layer. + * + * The routine copies the entire FCP command from @fcp_cmnd to @data while + * byte swapping the data to big endian format for transmission on the wire. + **/ +static void +lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd) +{ + int i, j; + for (i = 0, j = 0; i < sizeof(struct fcp_cmnd); + i += sizeof(uint32_t), j++) { + ((uint32_t *)data)[j] = cpu_to_be32(((uint32_t *)fcp_cmnd)[j]); + } +} + /** * lpfc_scsi_prep_cmnd - Wrapper func for convert scsi cmnd to FCP info unit * @vport: The virtual port for which this call is being executed. @@ -4225,6 +4223,9 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, fcp_cmnd->fcpCntl3 = 0; phba->fc4ControlRequests++; } + if (phba->sli_rev == 3 && + !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) + lpfc_fcpcmd_to_iocb(iocb_cmd->unsli3.fcp_ext.icd, fcp_cmnd); /* * Finish initializing those IOCB fields that are independent * of the scsi_cmnd request_buffer From 13bd817bb88499ce1dc1dfdaffcde17fa492aca5 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Mon, 11 May 2015 11:56:01 +0530 Subject: [PATCH 043/337] powerpc/thp: Serialize pmd clear against a linux page table walk. Serialize against find_linux_pte_or_hugepte() which does lock-less lookup in page tables with local interrupts disabled. For huge pages it casts pmd_t to pte_t. Since the format of pte_t is different from pmd_t we want to prevent transit from pmd pointing to page table to pmd pointing to huge page (and back) while interrupts are disabled. We clear pmd to possibly replace it with page table pointer in different code paths. So make sure we wait for the parallel find_linux_pte_or_hugepage() to finish. Without this patch, a find_linux_pte_or_hugepte() running in parallel to __split_huge_zero_page_pmd() or do_huge_pmd_wp_page_fallback() or zap_huge_pmd() can run into the above issue. With __split_huge_zero_page_pmd() and do_huge_pmd_wp_page_fallback() we clear the hugepage pte before inserting the pmd entry with a regular pgtable address. Such a clear need to wait for the parallel find_linux_pte_or_hugepte() to finish. With zap_huge_pmd(), we can run into issues, with a hugepage pte getting zapped due to a MADV_DONTNEED while other cpu fault it in as small pages. Reported-by: Kirill A. Shutemov Signed-off-by: Aneesh Kumar K.V Reviewed-by: Kirill A. Shutemov Signed-off-by: Michael Ellerman --- arch/powerpc/mm/pgtable_64.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index 59daa5eeec25..6bfadf1aa5cb 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -839,6 +839,17 @@ pmd_t pmdp_get_and_clear(struct mm_struct *mm, * hash fault look at them. */ memset(pgtable, 0, PTE_FRAG_SIZE); + /* + * Serialize against find_linux_pte_or_hugepte which does lock-less + * lookup in page tables with local interrupts disabled. For huge pages + * it casts pmd_t to pte_t. Since format of pte_t is different from + * pmd_t we want to prevent transit from pmd pointing to page table + * to pmd pointing to huge page (and back) while interrupts are disabled. + * We clear pmd to possibly replace it with page table pointer in + * different code paths. So make sure we wait for the parallel + * find_linux_pte_or_hugepage to finish. + */ + kick_all_cpus_sync(); return old_pmd; } From 7b868e81be38d5ad4f4aa4be819a5fa543cc5ee8 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Mon, 11 May 2015 11:58:29 +0530 Subject: [PATCH 044/337] powerpc/mm: Return NULL for not present hugetlb page We need to check whether pte is present in follow_huge_addr() and properly return NULL if mapping is not present. Also use READ_ONCE when dereferencing pte_t address. Without this patch, we may wrongly return a zero pfn page in follow_huge_addr(). Reviewed-by: David Gibson Signed-off-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman --- arch/powerpc/mm/hugetlbpage.c | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-) diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 0ce968b00b7c..3385e3d0506e 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -689,27 +689,34 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb, struct page * follow_huge_addr(struct mm_struct *mm, unsigned long address, int write) { - pte_t *ptep; - struct page *page; + pte_t *ptep, pte; unsigned shift; unsigned long mask, flags; + struct page *page = ERR_PTR(-EINVAL); + + local_irq_save(flags); + ptep = find_linux_pte_or_hugepte(mm->pgd, address, &shift); + if (!ptep) + goto no_page; + pte = READ_ONCE(*ptep); /* + * Verify it is a huge page else bail. * Transparent hugepages are handled by generic code. We can skip them * here. */ - local_irq_save(flags); - ptep = find_linux_pte_or_hugepte(mm->pgd, address, &shift); + if (!shift || pmd_trans_huge(__pmd(pte_val(pte)))) + goto no_page; - /* Verify it is a huge page else bail. */ - if (!ptep || !shift || pmd_trans_huge(*(pmd_t *)ptep)) { - local_irq_restore(flags); - return ERR_PTR(-EINVAL); + if (!pte_present(pte)) { + page = NULL; + goto no_page; } mask = (1UL << shift) - 1; - page = pte_page(*ptep); + page = pte_page(pte); if (page) page += (address & mask) / PAGE_SIZE; +no_page: local_irq_restore(flags); return page; } From 6d86750ce62391f5a0a7985d5c050c2e3c823ab9 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 4 May 2015 17:23:25 +0200 Subject: [PATCH 045/337] gpio: fix gpio leak in gpiochip_add error path Make sure to free any hogged gpios on errors in gpiochip_add. Also move all forward declarations to the top of the file. Fixes: f625d4601759 ("gpio: add GPIO hogging mechanism") Signed-off-by: Johan Hovold Reviewed-by: Alexandre Courbot Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 59eaa23767d8..6bc612b8a49f 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -53,6 +53,11 @@ static DEFINE_MUTEX(gpio_lookup_lock); static LIST_HEAD(gpio_lookup_list); LIST_HEAD(gpio_chips); + +static void gpiochip_free_hogs(struct gpio_chip *chip); +static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip); + + static inline void desc_set_label(struct gpio_desc *d, const char *label) { d->label = label; @@ -297,6 +302,7 @@ int gpiochip_add(struct gpio_chip *chip) err_remove_chip: acpi_gpiochip_remove(chip); + gpiochip_free_hogs(chip); of_gpiochip_remove(chip); spin_lock_irqsave(&gpio_lock, flags); list_del(&chip->list); @@ -313,10 +319,6 @@ err_free_descs: } EXPORT_SYMBOL_GPL(gpiochip_add); -/* Forward-declaration */ -static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip); -static void gpiochip_free_hogs(struct gpio_chip *chip); - /** * gpiochip_remove() - unregister a gpio_chip * @chip: the chip to unregister From ffb2d78eca08a1451137583d4e435aecfd6af809 Mon Sep 17 00:00:00 2001 From: Daniel Axtens Date: Tue, 12 May 2015 13:23:59 +1000 Subject: [PATCH 046/337] powerpc/mce: fix off by one errors in mce event handling Before 69111bac42f5 ("powerpc: Replace __get_cpu_var uses"), in save_mce_event, index got the value of mce_nest_count, and mce_nest_count was incremented *after* index was set. However, that patch changed the behaviour so that mce_nest count was incremented *before* setting index. This causes an off-by-one error, as get_mce_event sets index as mce_nest_count - 1 before reading mce_event. Thus get_mce_event reads bogus data, causing warnings like "Machine Check Exception, Unknown event version 0 !" and breaking MCEs handling. Restore the old behaviour and unbreak MCE handling by subtracting one from the newly incremented value. The same broken change occured in machine_check_queue_event (which set a queue read by machine_check_process_queued_event). Fix that too, unbreaking printing of MCE information. Fixes: 69111bac42f5 ("powerpc: Replace __get_cpu_var uses") CC: stable@vger.kernel.org CC: Mahesh Salgaonkar CC: Christoph Lameter Signed-off-by: Daniel Axtens Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/mce.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/mce.c b/arch/powerpc/kernel/mce.c index 15c99b649b04..b2eb4686bd8f 100644 --- a/arch/powerpc/kernel/mce.c +++ b/arch/powerpc/kernel/mce.c @@ -73,7 +73,7 @@ void save_mce_event(struct pt_regs *regs, long handled, uint64_t nip, uint64_t addr) { uint64_t srr1; - int index = __this_cpu_inc_return(mce_nest_count); + int index = __this_cpu_inc_return(mce_nest_count) - 1; struct machine_check_event *mce = this_cpu_ptr(&mce_event[index]); /* @@ -184,7 +184,7 @@ void machine_check_queue_event(void) if (!get_mce_event(&evt, MCE_EVENT_RELEASE)) return; - index = __this_cpu_inc_return(mce_queue_count); + index = __this_cpu_inc_return(mce_queue_count) - 1; /* If queue is full, just return for now. */ if (index >= MAX_MC_EVT) { __this_cpu_dec(mce_queue_count); From f230e8ffc03f17bd9d6b90ea890b8252a8cc1821 Mon Sep 17 00:00:00 2001 From: Michael Brunner Date: Mon, 11 May 2015 12:46:49 +0200 Subject: [PATCH 047/337] gpio: gpio-kempld: Fix get_direction return value This patch fixes an inverted return value of the gpio get_direction function. The wrong value causes the direction sysfs entry and GPIO debugfs file to indicate incorrect GPIO direction settings. In some cases it also prevents setting GPIO output values. The problem is also present in all other stable kernel versions since linux-3.12. Cc: Stable # v3.12+ Reported-by: Jochen Henneberg Signed-off-by: Michael Brunner Reviewed-by: Guenter Roeck Signed-off-by: Linus Walleij --- drivers/gpio/gpio-kempld.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-kempld.c b/drivers/gpio/gpio-kempld.c index 6b8115f34208..83f281dda1e0 100644 --- a/drivers/gpio/gpio-kempld.c +++ b/drivers/gpio/gpio-kempld.c @@ -117,7 +117,7 @@ static int kempld_gpio_get_direction(struct gpio_chip *chip, unsigned offset) = container_of(chip, struct kempld_gpio_data, chip); struct kempld_device_data *pld = gpio->pld; - return kempld_gpio_get_bit(pld, KEMPLD_GPIO_DIR_NUM(offset), offset); + return !kempld_gpio_get_bit(pld, KEMPLD_GPIO_DIR_NUM(offset), offset); } static int kempld_gpio_pincount(struct kempld_device_data *pld) From e6c906dedb8a332ece0e789980eef340fdcd9e20 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 12 May 2015 13:35:37 +0300 Subject: [PATCH 048/337] pinctrl: cherryview: Read triggering type from HW if not set when requested If a driver does not set interrupt triggering type when it calls request_irq(), it means use the pin as the hardware/firmware has configured it. There are some drivers doing this. One example is drivers/input/serio/i8042.c that requests the interrupt like: error = request_irq(I8042_KBD_IRQ, i8042_interrupt, IRQF_SHARED, "i8042", i8042_platform_device); It assumes the interrupt is already properly configured. This is true in case of interrupts connected to the IO-APIC. However, some Intel Braswell/Cherryview based machines use a GPIO here instead for the internal keyboard controller. This is a problem because even if the pin/interrupt is properly configured, the irqchip ->irq_set_type() will never be called as the triggering flags are 0. Because of that we do not have correct interrupt flow handler set for the interrupt. Fix this by adding a custom ->irq_startup() that checks if the interrupt has no triggering type set and in that case read the type directly from the hardware and install correct flow handler along with the mapping. Reported-by: Jagadish Krishnamoorthy Reported-by: Freddy Paul Signed-off-by: Mika Westerberg Signed-off-by: Linus Walleij --- drivers/pinctrl/intel/pinctrl-cherryview.c | 44 ++++++++++++++++++++++ 1 file changed, 44 insertions(+) diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c index 82f691eeeec4..732ff757a95f 100644 --- a/drivers/pinctrl/intel/pinctrl-cherryview.c +++ b/drivers/pinctrl/intel/pinctrl-cherryview.c @@ -1292,6 +1292,49 @@ static void chv_gpio_irq_unmask(struct irq_data *d) chv_gpio_irq_mask_unmask(d, false); } +static unsigned chv_gpio_irq_startup(struct irq_data *d) +{ + /* + * Check if the interrupt has been requested with 0 as triggering + * type. In that case it is assumed that the current values + * programmed to the hardware are used (e.g BIOS configured + * defaults). + * + * In that case ->irq_set_type() will never be called so we need to + * read back the values from hardware now, set correct flow handler + * and update mappings before the interrupt is being used. + */ + if (irqd_get_trigger_type(d) == IRQ_TYPE_NONE) { + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct chv_pinctrl *pctrl = gpiochip_to_pinctrl(gc); + unsigned offset = irqd_to_hwirq(d); + int pin = chv_gpio_offset_to_pin(pctrl, offset); + irq_flow_handler_t handler; + unsigned long flags; + u32 intsel, value; + + intsel = readl(chv_padreg(pctrl, pin, CHV_PADCTRL0)); + intsel &= CHV_PADCTRL0_INTSEL_MASK; + intsel >>= CHV_PADCTRL0_INTSEL_SHIFT; + + value = readl(chv_padreg(pctrl, pin, CHV_PADCTRL1)); + if (value & CHV_PADCTRL1_INTWAKECFG_LEVEL) + handler = handle_level_irq; + else + handler = handle_edge_irq; + + spin_lock_irqsave(&pctrl->lock, flags); + if (!pctrl->intr_lines[intsel]) { + __irq_set_handler_locked(d->irq, handler); + pctrl->intr_lines[intsel] = offset; + } + spin_unlock_irqrestore(&pctrl->lock, flags); + } + + chv_gpio_irq_unmask(d); + return 0; +} + static int chv_gpio_irq_type(struct irq_data *d, unsigned type) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); @@ -1357,6 +1400,7 @@ static int chv_gpio_irq_type(struct irq_data *d, unsigned type) static struct irq_chip chv_gpio_irqchip = { .name = "chv-gpio", + .irq_startup = chv_gpio_irq_startup, .irq_ack = chv_gpio_irq_ack, .irq_mask = chv_gpio_irq_mask, .irq_unmask = chv_gpio_irq_unmask, From 2d94e5224e81c58986a8cf44a3bf4830ce5cb96e Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Thu, 7 May 2015 14:26:34 -0700 Subject: [PATCH 049/337] HID: hid-sensor-hub: Fix debug lock warning When CONFIG_DEBUG_LOCK_ALLOC is defined, mutex magic is compared and warned for (l->magic != l), here l is the address of mutex pointer. In hid-sensor-hub as part of hsdev creation, a per hsdev mutex is initialized during MFD cell creation. This hsdev, which contains, mutex is part of platform data for the a cell. But platform_data is copied in platform_device_add_data() in platform.c. This copy will copy the whole hsdev structure including mutex. But once copied the magic will no longer match. So when client driver call sensor_hub_input_attr_get_raw_value, this will trigger mutex warning. So to avoid this allocate mutex dynamically. This will be same even after copy. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/hid-sensor-hub.c | 13 ++++++++++--- include/linux/hid-sensor-hub.h | 4 ++-- 2 files changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c index c3f6f1e311ea..090a1ba0abb6 100644 --- a/drivers/hid/hid-sensor-hub.c +++ b/drivers/hid/hid-sensor-hub.c @@ -294,7 +294,7 @@ int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev, if (!report) return -EINVAL; - mutex_lock(&hsdev->mutex); + mutex_lock(hsdev->mutex_ptr); if (flag == SENSOR_HUB_SYNC) { memset(&hsdev->pending, 0, sizeof(hsdev->pending)); init_completion(&hsdev->pending.ready); @@ -328,7 +328,7 @@ int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev, kfree(hsdev->pending.raw_data); hsdev->pending.status = false; } - mutex_unlock(&hsdev->mutex); + mutex_unlock(hsdev->mutex_ptr); return ret_val; } @@ -667,7 +667,14 @@ static int sensor_hub_probe(struct hid_device *hdev, hsdev->vendor_id = hdev->vendor; hsdev->product_id = hdev->product; hsdev->usage = collection->usage; - mutex_init(&hsdev->mutex); + hsdev->mutex_ptr = devm_kzalloc(&hdev->dev, + sizeof(struct mutex), + GFP_KERNEL); + if (!hsdev->mutex_ptr) { + ret = -ENOMEM; + goto err_stop_hw; + } + mutex_init(hsdev->mutex_ptr); hsdev->start_collection_index = i; if (last_hsdev) last_hsdev->end_collection_index = i; diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h index 0408421d885f..0042bf330b99 100644 --- a/include/linux/hid-sensor-hub.h +++ b/include/linux/hid-sensor-hub.h @@ -74,7 +74,7 @@ struct sensor_hub_pending { * @usage: Usage id for this hub device instance. * @start_collection_index: Starting index for a phy type collection * @end_collection_index: Last index for a phy type collection - * @mutex: synchronizing mutex. + * @mutex_ptr: synchronizing mutex pointer. * @pending: Holds information of pending sync read request. */ struct hid_sensor_hub_device { @@ -84,7 +84,7 @@ struct hid_sensor_hub_device { u32 usage; int start_collection_index; int end_collection_index; - struct mutex mutex; + struct mutex *mutex_ptr; struct sensor_hub_pending pending; }; From fdb6eb0a12871d5bfaf266c5a0d5259a5437a72f Mon Sep 17 00:00:00 2001 From: Koro Chen Date: Mon, 11 May 2015 10:36:53 +0800 Subject: [PATCH 050/337] ASoC: dapm: Modify widget stream name according to prefix When there is prefix specified, currently we will add this prefix in widget->name, but not in widget->sname. it causes failure at snd_soc_dapm_link_dai_widgets: if (!w->sname || !strstr(w->sname, dai_w->name)) because dai_w->name has prefix added, but w->sname does not. We should also add prefix for stream name Signed-off-by: Koro Chen Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/soc-dapm.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index defe0f0082b5..158204d08924 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -3100,11 +3100,16 @@ snd_soc_dapm_new_control(struct snd_soc_dapm_context *dapm, } prefix = soc_dapm_prefix(dapm); - if (prefix) + if (prefix) { w->name = kasprintf(GFP_KERNEL, "%s %s", prefix, widget->name); - else + if (widget->sname) + w->sname = kasprintf(GFP_KERNEL, "%s %s", prefix, + widget->sname); + } else { w->name = kasprintf(GFP_KERNEL, "%s", widget->name); - + if (widget->sname) + w->sname = kasprintf(GFP_KERNEL, "%s", widget->sname); + } if (w->name == NULL) { kfree(w); return NULL; From 85e36a1f4a735d991ba5106781ea48e89a0b8901 Mon Sep 17 00:00:00 2001 From: Zidan Wang Date: Tue, 12 May 2015 14:58:36 +0800 Subject: [PATCH 051/337] ASoC: wm8960: fix "RINPUT3" audio route error It should be "RINPUT3" instead of "LINPUT3" route to "Right Input Mixer". Signed-off-by: Zidan Wang Acked-by: Charles Keepax Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm8960.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c index 3035d9856415..e97a7615df85 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -395,7 +395,7 @@ static const struct snd_soc_dapm_route audio_paths[] = { { "Right Input Mixer", "Boost Switch", "Right Boost Mixer", }, { "Right Input Mixer", NULL, "RINPUT1", }, /* Really Boost Switch */ { "Right Input Mixer", NULL, "RINPUT2" }, - { "Right Input Mixer", NULL, "LINPUT3" }, + { "Right Input Mixer", NULL, "RINPUT3" }, { "Left ADC", NULL, "Left Input Mixer" }, { "Right ADC", NULL, "Right Input Mixer" }, From 17fc2e0a3db11889e942c5ab15a1fcb876638f25 Mon Sep 17 00:00:00 2001 From: Zidan Wang Date: Tue, 12 May 2015 14:58:50 +0800 Subject: [PATCH 052/337] ASoC: wm8994: correct BCLK DIV 348 to 384 According to the RM of wm8958, BCLK DIV 348 doesn't exist, correct it to 384. Signed-off-by: Zidan Wang Acked-by: Charles Keepax Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm8994.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 4fbc7689339a..a1c04dab6684 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -2754,7 +2754,7 @@ static struct { }; static int fs_ratios[] = { - 64, 128, 192, 256, 348, 512, 768, 1024, 1408, 1536 + 64, 128, 192, 256, 384, 512, 768, 1024, 1408, 1536 }; static int bclk_divs[] = { From 336b7e1f230912cd8df2497be8dd7be4647d8fc8 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Mon, 11 May 2015 14:06:32 -0400 Subject: [PATCH 053/337] block: remove export for blk_queue_bio With commit ff36ab345 ("dm: remove request-based logic from make_request_fn wrapper") DM no longer calls blk_queue_bio() directly, so remove its export. Doing so required a forward declaration in blk-core.c. Signed-off-by: Mike Snitzer Signed-off-by: Jens Axboe --- block/blk-core.c | 5 +++-- include/linux/blkdev.h | 2 -- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 7871603f0a29..03b5f8d77f37 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -734,6 +734,8 @@ blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id) } EXPORT_SYMBOL(blk_init_queue_node); +static void blk_queue_bio(struct request_queue *q, struct bio *bio); + struct request_queue * blk_init_allocated_queue(struct request_queue *q, request_fn_proc *rfn, spinlock_t *lock) @@ -1578,7 +1580,7 @@ void init_request_from_bio(struct request *req, struct bio *bio) blk_rq_bio_prep(req->q, req, bio); } -void blk_queue_bio(struct request_queue *q, struct bio *bio) +static void blk_queue_bio(struct request_queue *q, struct bio *bio) { const bool sync = !!(bio->bi_rw & REQ_SYNC); struct blk_plug *plug; @@ -1686,7 +1688,6 @@ out_unlock: spin_unlock_irq(q->queue_lock); } } -EXPORT_SYMBOL_GPL(blk_queue_bio); /* for device mapper only */ /* * If bio->bi_dev is a partition, remap the location diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 7f9a516f24de..5d93a6645e88 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -821,8 +821,6 @@ extern int scsi_cmd_ioctl(struct request_queue *, struct gendisk *, fmode_t, extern int sg_scsi_ioctl(struct request_queue *, struct gendisk *, fmode_t, struct scsi_ioctl_command __user *); -extern void blk_queue_bio(struct request_queue *q, struct bio *bio); - /* * A queue has just exitted congestion. Note this in the global counter of * congested queues, and wake up anyone who was waiting for requests to be From f60b8d449d850ae4aa3ee4fdaefec6b7882c92f7 Mon Sep 17 00:00:00 2001 From: Ingo Tuchscherer Date: Thu, 30 Apr 2015 15:36:48 +0200 Subject: [PATCH 054/337] s390/zcrypt: Fix invalid domain handling during ap module unload Added domain checking to prevent reset failures caused by invalid domains. Corrected removal sequence of bus attributes and device. Reviewed-by: Harald Freudenberger Signed-off-by: Ingo Tuchscherer Signed-off-by: Martin Schwidefsky --- drivers/s390/crypto/ap_bus.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index 6e506a88f43e..3ba611419759 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -1950,7 +1950,7 @@ static void ap_reset_domain(void) { int i; - if (ap_domain_index != -1) + if ((ap_domain_index != -1) && (ap_test_config_domain(ap_domain_index))) for (i = 0; i < AP_DEVICES; i++) ap_reset_queue(AP_MKQID(i, ap_domain_index)); } @@ -2095,7 +2095,6 @@ void ap_module_exit(void) hrtimer_cancel(&ap_poll_timer); destroy_workqueue(ap_work_queue); tasklet_kill(&ap_tasklet); - root_device_unregister(ap_root_device); while ((dev = bus_find_device(&ap_bus_type, NULL, NULL, __ap_match_all))) { @@ -2104,6 +2103,7 @@ void ap_module_exit(void) } for (i = 0; ap_bus_attrs[i]; i++) bus_remove_file(&ap_bus_type, ap_bus_attrs[i]); + root_device_unregister(ap_root_device); bus_unregister(&ap_bus_type); unregister_reset_call(&ap_reset_call); if (ap_using_interrupts()) From c431761dddff87039edb3300b9b29d1f9e0af2c9 Mon Sep 17 00:00:00 2001 From: Harald Freudenberger Date: Mon, 4 May 2015 13:27:49 +0200 Subject: [PATCH 055/337] s390/crypto: fix stckf loop The store-clock-fast loop in generate_entropy() mixes (exors) only the first 64 bytes of the initial page before doing the first SHA256. Fix the loop to mix the store-clock-fast values all over the page. Signed-off-by: Harald Freudenberger Reported-by: David Binderman Signed-off-by: Martin Schwidefsky --- arch/s390/crypto/prng.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/crypto/prng.c b/arch/s390/crypto/prng.c index 1f374b39a4ec..9d5192c94963 100644 --- a/arch/s390/crypto/prng.c +++ b/arch/s390/crypto/prng.c @@ -125,7 +125,7 @@ static int generate_entropy(u8 *ebuf, size_t nbytes) /* fill page with urandom bytes */ get_random_bytes(pg, PAGE_SIZE); /* exor page with stckf values */ - for (n = 0; n < sizeof(PAGE_SIZE/sizeof(u64)); n++) { + for (n = 0; n < PAGE_SIZE / sizeof(u64); n++) { u64 *p = ((u64 *)pg) + n; *p ^= get_tod_clock_fast(); } From f7bcb70ebae0dcdb5a2d859b09e4465784d99029 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Fri, 8 May 2015 13:47:23 -0700 Subject: [PATCH 056/337] ktime: Fix ktime_divns to do signed division It was noted that the 32bit implementation of ktime_divns() was doing unsigned division and didn't properly handle negative values. And when a ktime helper was changed to utilize ktime_divns, it caused a regression on some IR blasters. See the following bugzilla for details: https://bugzilla.redhat.com/show_bug.cgi?id=1200353 This patch fixes the problem in ktime_divns by checking and preserving the sign bit, and then reapplying it if appropriate after the division, it also changes the return type to a s64 to make it more obvious this is expected. Nicolas also pointed out that negative dividers would cause infinite loops on 32bit systems, negative dividers is unlikely for users of this function, but out of caution this patch adds checks for negative dividers for both 32-bit (BUG_ON) and 64-bit(WARN_ON) versions to make sure no such use cases creep in. [ tglx: Hand an u64 to do_div() to avoid the compiler warning ] Fixes: 166afb64511e 'ktime: Sanitize ktime_to_us/ms conversion' Reported-and-tested-by: Trevor Cordes Signed-off-by: John Stultz Acked-by: Nicolas Pitre Cc: Ingo Molnar Cc: Josh Boyer Cc: One Thousand Gnomes Cc: Link: http://lkml.kernel.org/r/1431118043-23452-1-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner --- include/linux/ktime.h | 27 +++++++++++++++++++++------ kernel/time/hrtimer.c | 14 ++++++++------ 2 files changed, 29 insertions(+), 12 deletions(-) diff --git a/include/linux/ktime.h b/include/linux/ktime.h index 5fc3d1083071..2b6a204bd8d4 100644 --- a/include/linux/ktime.h +++ b/include/linux/ktime.h @@ -166,19 +166,34 @@ static inline bool ktime_before(const ktime_t cmp1, const ktime_t cmp2) } #if BITS_PER_LONG < 64 -extern u64 __ktime_divns(const ktime_t kt, s64 div); -static inline u64 ktime_divns(const ktime_t kt, s64 div) +extern s64 __ktime_divns(const ktime_t kt, s64 div); +static inline s64 ktime_divns(const ktime_t kt, s64 div) { + /* + * Negative divisors could cause an inf loop, + * so bug out here. + */ + BUG_ON(div < 0); if (__builtin_constant_p(div) && !(div >> 32)) { - u64 ns = kt.tv64; - do_div(ns, div); - return ns; + s64 ns = kt.tv64; + u64 tmp = ns < 0 ? -ns : ns; + + do_div(tmp, div); + return ns < 0 ? -tmp : tmp; } else { return __ktime_divns(kt, div); } } #else /* BITS_PER_LONG < 64 */ -# define ktime_divns(kt, div) (u64)((kt).tv64 / (div)) +static inline s64 ktime_divns(const ktime_t kt, s64 div) +{ + /* + * 32-bit implementation cannot handle negative divisors, + * so catch them on 64bit as well. + */ + WARN_ON(div < 0); + return kt.tv64 / div; +} #endif static inline s64 ktime_to_us(const ktime_t kt) diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c index 76d4bd962b19..93ef7190bdea 100644 --- a/kernel/time/hrtimer.c +++ b/kernel/time/hrtimer.c @@ -266,21 +266,23 @@ lock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags) /* * Divide a ktime value by a nanosecond value */ -u64 __ktime_divns(const ktime_t kt, s64 div) +s64 __ktime_divns(const ktime_t kt, s64 div) { - u64 dclc; int sft = 0; + s64 dclc; + u64 tmp; dclc = ktime_to_ns(kt); + tmp = dclc < 0 ? -dclc : dclc; + /* Make sure the divisor is less than 2^32: */ while (div >> 32) { sft++; div >>= 1; } - dclc >>= sft; - do_div(dclc, (unsigned long) div); - - return dclc; + tmp >>= sft; + do_div(tmp, (unsigned long) div); + return dclc < 0 ? -tmp : tmp; } EXPORT_SYMBOL_GPL(__ktime_divns); #endif /* BITS_PER_LONG >= 64 */ From 849eca7b9dae0364e2fbe8afdf0fb610d12c9c8f Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Tue, 12 May 2015 10:00:00 -0700 Subject: [PATCH 057/337] HID: usbhid: Add HID_QUIRK_NOGET for Aten DVI KVM switch Like other KVM switches, the Aten DVI KVM switch needs a quirk to avoid spewing errors: [791759.606542] usb 1-5.4: input irq status -75 received [791759.614537] usb 1-5.4: input irq status -75 received [791759.622542] usb 1-5.4: input irq status -75 received Add it. Signed-off-by: Laura Abbott Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 1 + drivers/hid/usbhid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 41f167e4d75f..7ce93d927f62 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -164,6 +164,7 @@ #define USB_DEVICE_ID_ATEN_2PORTKVM 0x2204 #define USB_DEVICE_ID_ATEN_4PORTKVM 0x2205 #define USB_DEVICE_ID_ATEN_4PORTKVMC 0x2208 +#define USB_DEVICE_ID_ATEN_CS682 0x2213 #define USB_VENDOR_ID_ATMEL 0x03eb #define USB_DEVICE_ID_ATMEL_MULTITOUCH 0x211c diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index a775143e6265..4696895eb708 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -61,6 +61,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS682, HID_QUIRK_NOGET }, { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FIGHTERSTICK, HID_QUIRK_NOGET }, { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET }, { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE, HID_QUIRK_NOGET }, From 3fd61b209977db8a9fe6c44d5a5a7aee7a255f64 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 8 May 2015 18:00:26 +0200 Subject: [PATCH 058/337] nvme: fix kernel memory corruption with short INQUIRY buffers If userspace asks for an INQUIRY buffer smaller than 36 bytes, the SCSI translation layer will happily write past the end of the INQUIRY buffer allocation. This is fairly easily reproducible by running the libiscsi test suite and then starting an xfstests run. Fixes: 4f1982 ("NVMe: Update SCSI Inquiry VPD 83h translation") Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/block/nvme-scsi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/block/nvme-scsi.c b/drivers/block/nvme-scsi.c index 88f13c525712..44f2514fb775 100644 --- a/drivers/block/nvme-scsi.c +++ b/drivers/block/nvme-scsi.c @@ -2257,7 +2257,8 @@ static int nvme_trans_inquiry(struct nvme_ns *ns, struct sg_io_hdr *hdr, page_code = GET_INQ_PAGE_CODE(cmd); alloc_len = GET_INQ_ALLOC_LENGTH(cmd); - inq_response = kmalloc(alloc_len, GFP_KERNEL); + inq_response = kmalloc(max(alloc_len, STANDARD_INQUIRY_LENGTH), + GFP_KERNEL); if (inq_response == NULL) { res = -ENOMEM; goto out_mem; From 22ffc3e42aa6a656192a45c7364fbb2de3214d93 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 4 May 2015 12:45:38 -0700 Subject: [PATCH 059/337] Input: sx8654 - fix memory allocation check MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We have been testing wrong variable when trying to make sure that input allocation succeeded. Reported by Coverity (CID 1295918). Acked-by: Sébastien Szymanski Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/sx8654.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c index aecb9ad2e701..642f4a53de50 100644 --- a/drivers/input/touchscreen/sx8654.c +++ b/drivers/input/touchscreen/sx8654.c @@ -187,7 +187,7 @@ static int sx8654_probe(struct i2c_client *client, return -ENOMEM; input = devm_input_allocate_device(&client->dev); - if (!sx8654) + if (!input) return -ENOMEM; input->name = "SX8654 I2C Touchscreen"; From 3c0213d17a09601e0c6c0ae0e27caf70d988290f Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 23 Apr 2015 09:08:43 -0700 Subject: [PATCH 060/337] Input: elantech - fix semi-mt protocol for v3 HW When the v3 hardware sees more than one finger, it uses the semi-mt protocol to report the touches. However, it currently works when num_fingers is 0, 1 or 2, but when it is 3 and above, it sends only 1 finger as if num_fingers was 1. This confuses userspace which knows how to deal with extra fingers when all the slots are used, but not when some are missing. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=90101 Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elantech.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 991dc6b20a58..79363b687195 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -315,7 +315,7 @@ static void elantech_report_semi_mt_data(struct input_dev *dev, unsigned int x2, unsigned int y2) { elantech_set_slot(dev, 0, num_fingers != 0, x1, y1); - elantech_set_slot(dev, 1, num_fingers == 2, x2, y2); + elantech_set_slot(dev, 1, num_fingers >= 2, x2, y2); } /* From 6b19687563fa6f385ac314afa30b7579e8c3174c Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Wed, 6 May 2015 18:26:58 -0400 Subject: [PATCH 061/337] nfs: stat(2) fails during cthon04 basic test5 on NFSv4.0 When running the Connectathon basic tests against a Solaris NFS server over NFSv4.0, test5 reports that stat(2) returns a file size of zero instead of 1MB. On success, nfs_commit_inode() can return a positive result; see other call sites such as nfs_file_fsync_commit() and nfs_commit_unstable_pages(). The call site recently added in nfs_wb_all() does not prevent that positive return value from leaking to its callers. If it leaks through nfs_sync_inode() back to nfs_getattr(), that causes stat(2) to return a positive return value to user space while also not filling in the passed-in struct stat. Additional clean up: the new logic in nfs_wb_all() is rewritten in bfields-normal form. Fixes: 5bb89b4702e2 ("NFSv4.1/pnfs: Separate out metadata . . .") Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- fs/nfs/write.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/fs/nfs/write.c b/fs/nfs/write.c index d12a4be613a5..dfc19f1575a1 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -1845,12 +1845,15 @@ int nfs_wb_all(struct inode *inode) trace_nfs_writeback_inode_enter(inode); ret = filemap_write_and_wait(inode->i_mapping); - if (!ret) { - ret = nfs_commit_inode(inode, FLUSH_SYNC); - if (!ret) - pnfs_sync_inode(inode, true); - } + if (ret) + goto out; + ret = nfs_commit_inode(inode, FLUSH_SYNC); + if (ret < 0) + goto out; + pnfs_sync_inode(inode, true); + ret = 0; +out: trace_nfs_writeback_inode_exit(inode, ret); return ret; } From feaff8e5b2cfc3eae02cf65db7a400b0b9ffc596 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 12 May 2015 15:48:10 -0400 Subject: [PATCH 062/337] nfs: take extra reference to fl->fl_file when running a setlk We had a report of a crash while stress testing the NFS client: BUG: unable to handle kernel NULL pointer dereference at 0000000000000150 IP: [] locks_get_lock_context+0x8/0x90 PGD 0 Oops: 0000 [#1] SMP Modules linked in: rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ebtable_filter ebtable_broute bridge stp llc ebtables ip6table_security ip6table_mangle ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_raw ip6table_filter ip6_tables iptable_security iptable_mangle iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_raw coretemp crct10dif_pclmul ppdev crc32_pclmul crc32c_intel ghash_clmulni_intel vmw_balloon serio_raw vmw_vmci i2c_piix4 shpchp parport_pc acpi_cpufreq parport nfsd auth_rpcgss nfs_acl lockd grace sunrpc vmwgfx drm_kms_helper ttm drm mptspi scsi_transport_spi mptscsih mptbase e1000 ata_generic pata_acpi CPU: 1 PID: 399 Comm: kworker/1:1H Not tainted 4.1.0-0.rc1.git0.1.fc23.x86_64 #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/30/2013 Workqueue: rpciod rpc_async_schedule [sunrpc] task: ffff880036aea7c0 ti: ffff8800791f4000 task.ti: ffff8800791f4000 RIP: 0010:[] [] locks_get_lock_context+0x8/0x90 RSP: 0018:ffff8800791f7c00 EFLAGS: 00010293 RAX: ffff8800791f7c40 RBX: ffff88001f2ad8c0 RCX: ffffe8ffffc80305 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff8800791f7c88 R08: ffff88007fc971d8 R09: 279656d600000000 R10: 0000034a01000000 R11: 279656d600000000 R12: ffff88001f2ad918 R13: ffff88001f2ad8c0 R14: 0000000000000000 R15: 0000000100e73040 FS: 0000000000000000(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000150 CR3: 0000000001c0b000 CR4: 00000000000407e0 Stack: ffffffff8127c5b0 ffff8800791f7c18 ffffffffa0171e29 ffff8800791f7c58 ffffffffa0171ef8 ffff8800791f7c78 0000000000000246 ffff88001ea0ba00 ffff8800791f7c40 ffff8800791f7c40 00000000ff5d86a3 ffff8800791f7ca8 Call Trace: [] ? __posix_lock_file+0x40/0x760 [] ? rpc_make_runnable+0x99/0xa0 [sunrpc] [] ? rpc_wake_up_task_queue_locked.part.35+0xc8/0x250 [sunrpc] [] posix_lock_file_wait+0x4a/0x120 [] ? nfs41_wake_and_assign_slot+0x32/0x40 [nfsv4] [] ? nfs41_sequence_done+0xd8/0x2d0 [nfsv4] [] do_vfs_lock+0x2d/0x30 [nfsv4] [] nfs4_lock_done+0x1ad/0x210 [nfsv4] [] ? __rpc_sleep_on_priority+0x390/0x390 [sunrpc] [] ? __rpc_sleep_on_priority+0x390/0x390 [sunrpc] [] rpc_exit_task+0x2c/0xa0 [sunrpc] [] ? call_refreshresult+0x150/0x150 [sunrpc] [] __rpc_execute+0x90/0x460 [sunrpc] [] rpc_async_schedule+0x15/0x20 [sunrpc] [] process_one_work+0x1bb/0x410 [] worker_thread+0x53/0x480 [] ? process_one_work+0x410/0x410 [] ? process_one_work+0x410/0x410 [] kthread+0xd8/0xf0 [] ? kthread_worker_fn+0x180/0x180 [] ret_from_fork+0x42/0x70 [] ? kthread_worker_fn+0x180/0x180 Jean says: "Running locktests with a large number of iterations resulted in a client crash. The test run took a while and hasn't finished after close to 2 hours. The crash happened right after I gave up and killed the test (after 107m) with Ctrl+C." The crash happened because a NULL inode pointer got passed into locks_get_lock_context. The call chain indicates that file_inode(filp) returned NULL, which means that f_inode was NULL. Since that's zeroed out in __fput, that suggests that this filp pointer outlived the last reference. Looking at the code, that seems possible. We copy the struct file_lock that's passed in, but if the task is signalled at an inopportune time we can end up trying to use that file_lock in rpciod context after the process that requested it has already returned (and possibly put its filp reference). Fix this by taking an extra reference to the filp when we allocate the lock info, and put it in nfs4_lock_release. Reported-by: Jean Spector Signed-off-by: Jeff Layton Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 45b35b9b1e36..55e1e3af23a3 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include #include @@ -5604,6 +5605,7 @@ static struct nfs4_lockdata *nfs4_alloc_lockdata(struct file_lock *fl, p->server = server; atomic_inc(&lsp->ls_count); p->ctx = get_nfs_open_context(ctx); + get_file(fl->fl_file); memcpy(&p->fl, fl, sizeof(p->fl)); return p; out_free_seqid: @@ -5716,6 +5718,7 @@ static void nfs4_lock_release(void *calldata) nfs_free_seqid(data->arg.lock_seqid); nfs4_put_lock_state(data->lsp); put_nfs_open_context(data->ctx); + fput(data->fl.fl_file); kfree(data); dprintk("%s: done!\n", __func__); } From ca79f232054abd079648fdb4400c71a1310f7bc8 Mon Sep 17 00:00:00 2001 From: Wen-chien Jesse Sung Date: Wed, 13 May 2015 11:39:24 +0800 Subject: [PATCH 063/337] Bluetooth: ath3k: Add a new ID 0cf3:e006 to ath3k list Device info in /sys/kernel/debug/usb/devices: T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e006 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Wen-chien Jesse Sung Signed-off-by: Marcel Holtmann --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 288547a3c566..9a05153e1224 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -104,6 +104,7 @@ static const struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0cf3, 0xe003) }, { USB_DEVICE(0x0CF3, 0xE004) }, { USB_DEVICE(0x0CF3, 0xE005) }, + { USB_DEVICE(0x0CF3, 0xE006) }, { USB_DEVICE(0x13d3, 0x3362) }, { USB_DEVICE(0x13d3, 0x3375) }, { USB_DEVICE(0x13d3, 0x3393) }, @@ -158,6 +159,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index d21f3b4176d3..13d2cae3e13d 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -202,6 +202,7 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, From 2054111b107d9449393d96dce6b66731bbfea9ad Mon Sep 17 00:00:00 2001 From: Wen-chien Jesse Sung Date: Wed, 13 May 2015 11:39:25 +0800 Subject: [PATCH 064/337] Bluetooth: btusb: Add support for 0cf3:e007 Device 0cf3:e007 is one of the QCA ROME family. T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e007 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Wen-chien Jesse Sung Signed-off-by: Marcel Holtmann --- drivers/bluetooth/btusb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 13d2cae3e13d..7da7efc2cd67 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -219,6 +219,7 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 }, /* QCA ROME chipset */ + { USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME }, { USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME }, { USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME }, From ec0810d2ac1c932dad48f45da67e3adc5c5449a1 Mon Sep 17 00:00:00 2001 From: Dmitry Tunin Date: Sat, 2 May 2015 13:36:58 +0300 Subject: [PATCH 065/337] Bluetooth: ath3k: add support of 04ca:300f AR3012 device BugLink: https://bugs.launchpad.net/bugs/1449730 T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=300f Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Dmitry Tunin Signed-off-by: Marcel Holtmann --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 9a05153e1224..8c81af6dbe06 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -88,6 +88,7 @@ static const struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x04CA, 0x3007) }, { USB_DEVICE(0x04CA, 0x3008) }, { USB_DEVICE(0x04CA, 0x300b) }, + { USB_DEVICE(0x04CA, 0x300f) }, { USB_DEVICE(0x04CA, 0x3010) }, { USB_DEVICE(0x0930, 0x0219) }, { USB_DEVICE(0x0930, 0x0220) }, @@ -144,6 +145,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 7da7efc2cd67..3c10d4dfe9a7 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -186,6 +186,7 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 }, From a29ef819f3f34f89a1b9b6a939b4c1cdfe1e85ce Mon Sep 17 00:00:00 2001 From: Philippe Reynes Date: Wed, 13 May 2015 00:18:26 +0200 Subject: [PATCH 066/337] ARM: dts: imx27: only map 4 Kbyte for fec registers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to the imx27 documentation, fec has a 4 Kbyte memory space map. Moreover, the actual 16 Kbyte mapping overlaps the SCC (Security Controller) memory register space. So, we reduce the memory register space to 4 Kbyte. Signed-off-by: Philippe Reynes Acked-by: Uwe Kleine-König Fixes: 9f0749e3eb88 ("ARM i.MX27: Add devicetree support") Cc: Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx27.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 6951b66d1ab7..bc215e4b75fd 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -533,7 +533,7 @@ fec: ethernet@1002b000 { compatible = "fsl,imx27-fec"; - reg = <0x1002b000 0x4000>; + reg = <0x1002b000 0x1000>; interrupts = <50>; clocks = <&clks IMX27_CLK_FEC_IPG_GATE>, <&clks IMX27_CLK_FEC_AHB_GATE>; From be346ffaad9bc354075fba5cd009fc4519abdd64 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Tue, 12 May 2015 20:53:14 -0400 Subject: [PATCH 067/337] vlan: Correctly propagate promisc|allmulti flags in notifier. Currently vlan notifier handler will try to update all vlans for a device when that device comes up. A problem occurs, however, when the vlan device was set to promiscuous, but not by the user (ex: a bridge). In that case, dev->gflags are not updated. What results is that the lower device ends up with an extra promiscuity count. Here are the backtraces that prove this: [62852.052179] [] __dev_set_promiscuity+0x38/0x1e0 [62852.052186] [] ? _raw_spin_unlock_bh+0x1b/0x40 [62852.052188] [] ? dev_set_rx_mode+0x2e/0x40 [62852.052190] [] dev_set_promiscuity+0x24/0x50 [62852.052194] [] vlan_dev_open+0xd5/0x1f0 [8021q] [62852.052196] [] __dev_open+0xbf/0x140 [62852.052198] [] __dev_change_flags+0x9d/0x170 [62852.052200] [] dev_change_flags+0x29/0x60 The above comes from the setting the vlan device to IFF_UP state. [62852.053569] [] __dev_set_promiscuity+0x38/0x1e0 [62852.053571] [] ? vlan_dev_set_rx_mode+0x2b/0x30 [8021q] [62852.053573] [] __dev_change_flags+0xe5/0x170 [62852.053645] [] dev_change_flags+0x29/0x60 [62852.053647] [] vlan_device_event+0x18a/0x690 [8021q] [62852.053649] [] notifier_call_chain+0x4c/0x70 [62852.053651] [] raw_notifier_call_chain+0x16/0x20 [62852.053653] [] call_netdevice_notifiers+0x2d/0x60 [62852.053654] [] __dev_notify_flags+0x33/0xa0 [62852.053656] [] dev_change_flags+0x52/0x60 [62852.053657] [] do_setlink+0x397/0xa40 And this one comes from the notification code. What we end up with is a vlan with promiscuity count of 1 and and a physical device with a promiscuity count of 2. They should both have a count 1. To resolve this issue, vlan code can use dev_get_flags() api which correctly masks promiscuity and allmulti flags. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/8021q/vlan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index 98a30a5b8664..59555f0f8fc8 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -443,7 +443,7 @@ static int vlan_device_event(struct notifier_block *unused, unsigned long event, case NETDEV_UP: /* Put all VLANs for this dev in the up state too. */ vlan_group_for_each_dev(grp, i, vlandev) { - flgs = vlandev->flags; + flgs = dev_get_flags(vlandev); if (flgs & IFF_UP) continue; From 5e95235ccd5442d4a4fe11ec4eb99ba1b7959368 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 14 May 2015 14:45:40 +1000 Subject: [PATCH 068/337] powerpc: Align TOC to 256 bytes Recent toolchains force the TOC to be 256 byte aligned. We need to enforce this alignment in our linker script, otherwise pointers to our TOC variables (__toc_start, __prom_init_toc_start) could be incorrect. If they are bad, we die a few hundred instructions into boot. Cc: stable@vger.kernel.org Signed-off-by: Anton Blanchard Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/vmlinux.lds.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index f096e72262f4..1db685104ffc 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -213,6 +213,7 @@ SECTIONS *(.opd) } + . = ALIGN(256); .got : AT(ADDR(.got) - LOAD_OFFSET) { __toc_start = .; #ifndef CONFIG_RELOCATABLE From d377c5eb54dd05aeb3094b7740252d19ba7791f7 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Thu, 14 May 2015 10:04:44 +0200 Subject: [PATCH 069/337] ovl: don't remove non-empty opaque directory When removing an opaque directory we can't just call rmdir() to check for emptiness, because the directory will need to be replaced with a whiteout. The replacement is done with RENAME_EXCHANGE, which doesn't check emptiness. Solution is just to check emptiness by reading the directory. In the future we could add a new rename flag to check for emptiness even for RENAME_EXCHANGE to optimize this case. Reported-by: Vincent Batts Signed-off-by: Miklos Szeredi Tested-by: Jordi Pujol Palomer Fixes: 263b4a0fee43 ("ovl: dont replace opaque dir") Cc: # v4.0+ --- fs/overlayfs/dir.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/fs/overlayfs/dir.c b/fs/overlayfs/dir.c index d139405d2bfa..2578a0c0677d 100644 --- a/fs/overlayfs/dir.c +++ b/fs/overlayfs/dir.c @@ -506,11 +506,25 @@ static int ovl_remove_and_whiteout(struct dentry *dentry, bool is_dir) struct dentry *opaquedir = NULL; int err; - if (is_dir && OVL_TYPE_MERGE_OR_LOWER(ovl_path_type(dentry))) { - opaquedir = ovl_check_empty_and_clear(dentry); - err = PTR_ERR(opaquedir); - if (IS_ERR(opaquedir)) - goto out; + if (is_dir) { + if (OVL_TYPE_MERGE_OR_LOWER(ovl_path_type(dentry))) { + opaquedir = ovl_check_empty_and_clear(dentry); + err = PTR_ERR(opaquedir); + if (IS_ERR(opaquedir)) + goto out; + } else { + LIST_HEAD(list); + + /* + * When removing an empty opaque directory, then it + * makes no sense to replace it with an exact replica of + * itself. But emptiness still needs to be checked. + */ + err = ovl_check_empty_dir(dentry, &list); + ovl_cache_free(&list); + if (err) + goto out; + } } err = ovl_lock_rename_workdir(workdir, upperdir); From 177d0506a911eb60b38b172215df5325ed94fa64 Mon Sep 17 00:00:00 2001 From: Wesley Kuo Date: Wed, 13 May 2015 10:33:15 +0800 Subject: [PATCH 070/337] Bluetooth: Fix remote name event return directly. This patch fixes hci_remote_name_evt dose not resolve name during discovery status is RESOLVING. Before simultaneous dual mode scan enabled, hci_check_pending_name will set discovery status to STOPPED eventually. Signed-off-by: Wesley Kuo Signed-off-by: Marcel Holtmann --- net/bluetooth/hci_core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 4663c3dad3f5..c4802f3bd4c5 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -2854,9 +2854,11 @@ static void le_scan_disable_work_complete(struct hci_dev *hdev, u8 status, * state. If we were running both LE and BR/EDR inquiry * simultaneously, and BR/EDR inquiry is already * finished, stop discovery, otherwise BR/EDR inquiry - * will stop discovery when finished. + * will stop discovery when finished. If we will resolve + * remote device name, do not change discovery state. */ - if (!test_bit(HCI_INQUIRY, &hdev->flags)) + if (!test_bit(HCI_INQUIRY, &hdev->flags) && + hdev->discovery.state != DISCOVERY_RESOLVING) hci_discovery_set_state(hdev, DISCOVERY_STOPPED); } else { From 965278dcb8ab0b1f666cc47937933c4be4aea48d Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Wed, 13 May 2015 15:07:54 +0100 Subject: [PATCH 071/337] ARM: 8356/1: mm: handle non-pmd-aligned end of RAM At boot time we round the memblock limit down to section size in an attempt to ensure that we will have mapped this RAM with section mappings prior to allocating from it. When mapping RAM we iterate over PMD-sized chunks, creating these section mappings. Section mappings are only created when the end of a chunk is aligned to section size. Unfortunately, with classic page tables (where PMD_SIZE is 2 * SECTION_SIZE) this means that if a chunk is between 1M and 2M in size the first 1M will not be mapped despite having been accounted for in the memblock limit. This has been observed to result in page tables being allocated from unmapped memory, causing boot-time hangs. This patch modifies the memblock limit rounding to always round down to PMD_SIZE instead of SECTION_SIZE. For classic MMU this means that we will round the memblock limit down to a 2M boundary, matching the limits on section mappings, and preventing allocations from unmapped memory. For LPAE there should be no change as PMD_SIZE == SECTION_SIZE. Signed-off-by: Mark Rutland Reported-by: Stefan Agner Tested-by: Stefan Agner Acked-by: Laura Abbott Tested-by: Hans de Goede Cc: Catalin Marinas Cc: Steve Capper Cc: stable@vger.kernel.org Signed-off-by: Russell King --- arch/arm/mm/mmu.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4e6ef896c619..7186382672b5 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -1112,22 +1112,22 @@ void __init sanity_check_meminfo(void) } /* - * Find the first non-section-aligned page, and point + * Find the first non-pmd-aligned page, and point * memblock_limit at it. This relies on rounding the - * limit down to be section-aligned, which happens at - * the end of this function. + * limit down to be pmd-aligned, which happens at the + * end of this function. * * With this algorithm, the start or end of almost any - * bank can be non-section-aligned. The only exception - * is that the start of the bank 0 must be section- + * bank can be non-pmd-aligned. The only exception is + * that the start of the bank 0 must be section- * aligned, since otherwise memory would need to be * allocated when mapping the start of bank 0, which * occurs before any free memory is mapped. */ if (!memblock_limit) { - if (!IS_ALIGNED(block_start, SECTION_SIZE)) + if (!IS_ALIGNED(block_start, PMD_SIZE)) memblock_limit = block_start; - else if (!IS_ALIGNED(block_end, SECTION_SIZE)) + else if (!IS_ALIGNED(block_end, PMD_SIZE)) memblock_limit = arm_lowmem_limit; } @@ -1137,12 +1137,12 @@ void __init sanity_check_meminfo(void) high_memory = __va(arm_lowmem_limit - 1) + 1; /* - * Round the memblock limit down to a section size. This + * Round the memblock limit down to a pmd size. This * helps to ensure that we will allocate memory from the - * last full section, which should be mapped. + * last full pmd, which should be mapped. */ if (memblock_limit) - memblock_limit = round_down(memblock_limit, SECTION_SIZE); + memblock_limit = round_down(memblock_limit, PMD_SIZE); if (!memblock_limit) memblock_limit = arm_lowmem_limit; From fc99f97af2f79be02c5045c9a02c50bdcc0c8ff8 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 9 Apr 2015 16:39:51 +0200 Subject: [PATCH 072/337] drm/msm: Fix a couple of 64-bit build warnings Avoid casts from pointers to fixed-size integers to prevent the compiler from warning. Print virtual memory addresses using %p instead. Also turn a couple of %d/%x specifiers into %zu/%zd/%zx to avoid further warnings due to mismatched format strings. Signed-off-by: Thierry Reding Reviewed-by: Rob Clark --- drivers/gpu/drm/msm/edp/edp_aux.c | 4 ++-- drivers/gpu/drm/msm/msm_drv.c | 10 +++++----- drivers/gpu/drm/msm/msm_gem.c | 2 +- drivers/gpu/drm/msm/msm_iommu.c | 4 ++-- 4 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/msm/edp/edp_aux.c b/drivers/gpu/drm/msm/edp/edp_aux.c index 5f5a84f6074c..208f9d47f82e 100644 --- a/drivers/gpu/drm/msm/edp/edp_aux.c +++ b/drivers/gpu/drm/msm/edp/edp_aux.c @@ -132,7 +132,7 @@ ssize_t edp_aux_transfer(struct drm_dp_aux *drm_aux, struct drm_dp_aux_msg *msg) /* msg sanity check */ if ((native && (msg->size > AUX_CMD_NATIVE_MAX)) || (msg->size > AUX_CMD_I2C_MAX)) { - pr_err("%s: invalid msg: size(%d), request(%x)\n", + pr_err("%s: invalid msg: size(%zu), request(%x)\n", __func__, msg->size, msg->request); return -EINVAL; } @@ -155,7 +155,7 @@ ssize_t edp_aux_transfer(struct drm_dp_aux *drm_aux, struct drm_dp_aux_msg *msg) */ edp_write(aux->base + REG_EDP_AUX_TRANS_CTRL, 0); msm_edp_aux_ctrl(aux, 1); - pr_err("%s: aux timeout, %d\n", __func__, ret); + pr_err("%s: aux timeout, %zd\n", __func__, ret); goto unlock_exit; } DBG("completion"); diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index 47f4dd407671..cc5dc5299b8d 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -94,7 +94,7 @@ void __iomem *msm_ioremap(struct platform_device *pdev, const char *name, } if (reglog) - printk(KERN_DEBUG "IO:region %s %08x %08lx\n", dbgname, (u32)ptr, size); + printk(KERN_DEBUG "IO:region %s %p %08lx\n", dbgname, ptr, size); return ptr; } @@ -102,7 +102,7 @@ void __iomem *msm_ioremap(struct platform_device *pdev, const char *name, void msm_writel(u32 data, void __iomem *addr) { if (reglog) - printk(KERN_DEBUG "IO:W %08x %08x\n", (u32)addr, data); + printk(KERN_DEBUG "IO:W %p %08x\n", addr, data); writel(data, addr); } @@ -110,7 +110,7 @@ u32 msm_readl(const void __iomem *addr) { u32 val = readl(addr); if (reglog) - printk(KERN_ERR "IO:R %08x %08x\n", (u32)addr, val); + printk(KERN_ERR "IO:R %p %08x\n", addr, val); return val; } @@ -177,7 +177,7 @@ static int get_mdp_ver(struct platform_device *pdev) const struct of_device_id *match; match = of_match_node(match_types, dev->of_node); if (match) - return (int)match->data; + return (int)(unsigned long)match->data; #endif return 4; } @@ -216,7 +216,7 @@ static int msm_init_vram(struct drm_device *dev) if (ret) return ret; size = r.end - r.start; - DRM_INFO("using VRAM carveout: %lx@%08x\n", size, r.start); + DRM_INFO("using VRAM carveout: %lx@%pa\n", size, &r.start); } else #endif diff --git a/drivers/gpu/drm/msm/msm_gem.c b/drivers/gpu/drm/msm/msm_gem.c index 479d8af72bcb..52839769eb6c 100644 --- a/drivers/gpu/drm/msm/msm_gem.c +++ b/drivers/gpu/drm/msm/msm_gem.c @@ -483,7 +483,7 @@ void msm_gem_describe(struct drm_gem_object *obj, struct seq_file *m) uint64_t off = drm_vma_node_start(&obj->vma_node); WARN_ON(!mutex_is_locked(&dev->struct_mutex)); - seq_printf(m, "%08x: %c(r=%u,w=%u) %2d (%2d) %08llx %p %d\n", + seq_printf(m, "%08x: %c(r=%u,w=%u) %2d (%2d) %08llx %p %zu\n", msm_obj->flags, is_active(msm_obj) ? 'A' : 'I', msm_obj->read_fence, msm_obj->write_fence, obj->name, obj->refcount.refcount.counter, diff --git a/drivers/gpu/drm/msm/msm_iommu.c b/drivers/gpu/drm/msm/msm_iommu.c index 7acdaa5688b7..7ac2f1997e4a 100644 --- a/drivers/gpu/drm/msm/msm_iommu.c +++ b/drivers/gpu/drm/msm/msm_iommu.c @@ -60,7 +60,7 @@ static int msm_iommu_map(struct msm_mmu *mmu, uint32_t iova, u32 pa = sg_phys(sg) - sg->offset; size_t bytes = sg->length + sg->offset; - VERB("map[%d]: %08x %08x(%x)", i, iova, pa, bytes); + VERB("map[%d]: %08x %08x(%zx)", i, iova, pa, bytes); ret = iommu_map(domain, da, pa, bytes, prot); if (ret) @@ -99,7 +99,7 @@ static int msm_iommu_unmap(struct msm_mmu *mmu, uint32_t iova, if (unmapped < bytes) return unmapped; - VERB("unmap[%d]: %08x(%x)", i, iova, bytes); + VERB("unmap[%d]: %08x(%zx)", i, iova, bytes); BUG_ON(!PAGE_ALIGNED(bytes)); From 981371f326235e07e33f62b4196d1e04603f6a49 Mon Sep 17 00:00:00 2001 From: Stephane Viau Date: Thu, 30 Apr 2015 10:39:26 -0400 Subject: [PATCH 073/337] drm/msm/dsi: Fix a couple more 64-bit build warnings Avoid such errors at compilation time: format '%d' expects argument of type 'int', but argument 3 has type 'size_t' Signed-off-by: Stephane Viau --- drivers/gpu/drm/msm/dsi/dsi_host.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index 956b22492c9a..28e712792159 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -1023,7 +1023,7 @@ static int dsi_short_read1_resp(u8 *buf, const struct mipi_dsi_msg *msg) *data = buf[1]; /* strip out dcs type */ return 1; } else { - pr_err("%s: read data does not match with rx_buf len %d\n", + pr_err("%s: read data does not match with rx_buf len %zu\n", __func__, msg->rx_len); return -EINVAL; } @@ -1040,7 +1040,7 @@ static int dsi_short_read2_resp(u8 *buf, const struct mipi_dsi_msg *msg) data[1] = buf[2]; return 2; } else { - pr_err("%s: read data does not match with rx_buf len %d\n", + pr_err("%s: read data does not match with rx_buf len %zu\n", __func__, msg->rx_len); return -EINVAL; } From a2ca77898e9b81f6d6b3bfa1ff46713e697e8af7 Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Mon, 23 Feb 2015 15:59:21 +0530 Subject: [PATCH 074/337] drm: msm: Fix build when legacy fbdev support isn't set The DRM_KMS_FB_HELPER config is selected only when DRM_MSM_FBDEV config is selected. The driver accesses drm_fb_helper_* functions even when legacy fbdev support is disabled in msm. Wrap around these functions with #ifdef checks to prevent build break. Signed-off-by: Archit Taneja --- drivers/gpu/drm/msm/msm_drv.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index cc5dc5299b8d..72f2b962efd4 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -21,9 +21,11 @@ static void msm_fb_output_poll_changed(struct drm_device *dev) { +#ifdef CONFIG_DRM_MSM_FBDEV struct msm_drm_private *priv = dev->dev_private; if (priv->fbdev) drm_fb_helper_hotplug_event(priv->fbdev); +#endif } static const struct drm_mode_config_funcs mode_config_funcs = { @@ -419,9 +421,11 @@ static void msm_preclose(struct drm_device *dev, struct drm_file *file) static void msm_lastclose(struct drm_device *dev) { +#ifdef CONFIG_DRM_MSM_FBDEV struct msm_drm_private *priv = dev->dev_private; if (priv->fbdev) drm_fb_helper_restore_fbdev_mode_unlocked(priv->fbdev); +#endif } static irqreturn_t msm_irq(int irq, void *arg) From 6128f1bec447cdaa42b61093e351697dbe1c72ed Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 5 Apr 2015 14:06:31 +0200 Subject: [PATCH 075/337] drm/msm/dp: fix error return code Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall --- drivers/gpu/drm/msm/edp/edp_ctrl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/edp/edp_ctrl.c b/drivers/gpu/drm/msm/edp/edp_ctrl.c index 0ec5abdba5c4..29e52d7c61c0 100644 --- a/drivers/gpu/drm/msm/edp/edp_ctrl.c +++ b/drivers/gpu/drm/msm/edp/edp_ctrl.c @@ -1149,12 +1149,13 @@ int msm_edp_ctrl_init(struct msm_edp *edp) ctrl->aux = msm_edp_aux_init(dev, ctrl->base, &ctrl->drm_aux); if (!ctrl->aux || !ctrl->drm_aux) { pr_err("%s:failed to init aux\n", __func__); - return ret; + return -ENOMEM; } ctrl->phy = msm_edp_phy_init(dev, ctrl->base); if (!ctrl->phy) { pr_err("%s:failed to init phy\n", __func__); + ret = -ENOMEM; goto err_destory_aux; } From 651ad3f52b9d0b11b8ebe94c3810ac89f9f75653 Mon Sep 17 00:00:00 2001 From: Hai Li Date: Wed, 29 Apr 2015 11:38:59 -0400 Subject: [PATCH 076/337] drm/msm/dsi: Fixup missing *break* statement during cmd rx Signed-off-by: Hai Li --- drivers/gpu/drm/msm/dsi/dsi_host.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index 28e712792159..a3ff0e296604 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -1797,6 +1797,7 @@ int msm_dsi_host_cmd_rx(struct mipi_dsi_host *host, case MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT: pr_err("%s: rx ACK_ERR_PACLAGE\n", __func__); ret = 0; + break; case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE: case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE: ret = dsi_short_read1_resp(buf, msg); From fe34464df5e8bd4b09db170477f32db4eade0444 Mon Sep 17 00:00:00 2001 From: Stephane Viau Date: Thu, 30 Apr 2015 13:45:52 -0400 Subject: [PATCH 077/337] drm/msm/mdp5: Fix iteration on INTF config array The current iteration in get_dsi_id_from_intf() is wrong: instead of iterating until hw_cfg->intf.count, we need to iterate until MDP5_INTF_NUM_MAX here. Let's take the example of msm8x16: hw_cfg->intf.count = 1 intfs[0] = INTF_Disabled intfs[1] = INTF_DSI If we stop iterating once i reaches hw_cfg->intf.count (== 1), we will miss the test for intfs[1]. Actually, this hw_cfg->intf.count entry is quite confusing and is not (or *should not be*) used anywhere else; let's remove it. Signed-off-by: Stephane Viau --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c | 34 ++++++++++++------------- drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.h | 9 ++++--- drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c | 12 ++++----- 3 files changed, 29 insertions(+), 26 deletions(-) diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c index e001e6b2296a..8b9a7931b162 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c @@ -72,14 +72,13 @@ const struct mdp5_cfg_hw msm8x74_config = { .base = { 0x12d00, 0x12e00, 0x12f00 }, }, .intf = { - .count = 4, .base = { 0x12500, 0x12700, 0x12900, 0x12b00 }, - }, - .intfs = { - [0] = INTF_eDP, - [1] = INTF_DSI, - [2] = INTF_DSI, - [3] = INTF_HDMI, + .connect = { + [0] = INTF_eDP, + [1] = INTF_DSI, + [2] = INTF_DSI, + [3] = INTF_HDMI, + }, }, .max_clk = 200000000, }; @@ -142,14 +141,13 @@ const struct mdp5_cfg_hw apq8084_config = { .base = { 0x12f00, 0x13000, 0x13100, 0x13200 }, }, .intf = { - .count = 5, .base = { 0x12500, 0x12700, 0x12900, 0x12b00, 0x12d00 }, - }, - .intfs = { - [0] = INTF_eDP, - [1] = INTF_DSI, - [2] = INTF_DSI, - [3] = INTF_HDMI, + .connect = { + [0] = INTF_eDP, + [1] = INTF_DSI, + [2] = INTF_DSI, + [3] = INTF_HDMI, + }, }, .max_clk = 320000000, }; @@ -196,10 +194,12 @@ const struct mdp5_cfg_hw msm8x16_config = { }, .intf = { - .count = 1, /* INTF_1 */ - .base = { 0x6B800 }, + .base = { 0x00000, 0x6b800 }, + .connect = { + [0] = INTF_DISABLED, + [1] = INTF_DSI, + }, }, - /* TODO enable .intfs[] with [1] = INTF_DSI, once DSI is implemented */ .max_clk = 320000000, }; diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.h b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.h index 3a551b0892d8..69349abe59f2 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.h +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.h @@ -59,6 +59,11 @@ struct mdp5_smp_block { #define MDP5_INTF_NUM_MAX 5 +struct mdp5_intf_block { + uint32_t base[MAX_BASES]; + u32 connect[MDP5_INTF_NUM_MAX]; /* array of enum mdp5_intf_type */ +}; + struct mdp5_cfg_hw { char *name; @@ -72,9 +77,7 @@ struct mdp5_cfg_hw { struct mdp5_sub_block dspp; struct mdp5_sub_block ad; struct mdp5_sub_block pp; - struct mdp5_sub_block intf; - - u32 intfs[MDP5_INTF_NUM_MAX]; /* array of enum mdp5_intf_type */ + struct mdp5_intf_block intf; uint32_t max_clk; }; diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c index dfa8beb9343a..bbacf9d2b738 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c @@ -206,8 +206,8 @@ static struct drm_encoder *construct_encoder(struct mdp5_kms *mdp5_kms, static int get_dsi_id_from_intf(const struct mdp5_cfg_hw *hw_cfg, int intf_num) { - const int intf_cnt = hw_cfg->intf.count; - const u32 *intfs = hw_cfg->intfs; + const enum mdp5_intf_type *intfs = hw_cfg->intf.connect; + const int intf_cnt = ARRAY_SIZE(hw_cfg->intf.connect); int id = 0, i; for (i = 0; i < intf_cnt; i++) { @@ -228,7 +228,7 @@ static int modeset_init_intf(struct mdp5_kms *mdp5_kms, int intf_num) struct msm_drm_private *priv = dev->dev_private; const struct mdp5_cfg_hw *hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg); - enum mdp5_intf_type intf_type = hw_cfg->intfs[intf_num]; + enum mdp5_intf_type intf_type = hw_cfg->intf.connect[intf_num]; struct drm_encoder *encoder; int ret = 0; @@ -365,7 +365,7 @@ static int modeset_init(struct mdp5_kms *mdp5_kms) /* Construct encoders and modeset initialize connector devices * for each external display interface. */ - for (i = 0; i < ARRAY_SIZE(hw_cfg->intfs); i++) { + for (i = 0; i < ARRAY_SIZE(hw_cfg->intf.connect); i++) { ret = modeset_init_intf(mdp5_kms, i); if (ret) goto fail; @@ -514,8 +514,8 @@ struct msm_kms *mdp5_kms_init(struct drm_device *dev) */ mdp5_enable(mdp5_kms); for (i = 0; i < MDP5_INTF_NUM_MAX; i++) { - if (!config->hw->intf.base[i] || - mdp5_cfg_intf_is_virtual(config->hw->intfs[i])) + if (mdp5_cfg_intf_is_virtual(config->hw->intf.connect[i]) || + !config->hw->intf.base[i]) continue; mdp5_write(mdp5_kms, REG_MDP5_INTF_TIMING_ENGINE_EN(i), 0); } From 7194b62c8c99727e3f145b00b8390a905252370e Mon Sep 17 00:00:00 2001 From: Stephane Viau Date: Tue, 5 May 2015 09:47:57 -0400 Subject: [PATCH 078/337] drm/msm: fix unbalanced DRM framebuffer init/destroy When msm_framebuffer_init() fails before calling drm_framebuffer_init(), drm_framebuffer_cleanup() [called in msm_framebuffer_destroy()] is still being called even though drm_framebuffer_init() was not called for that buffer. Thus a NULL pointer derefencing: [ 247.529691] Unable to handle kernel NULL pointer dereference at virtual address 0000027c ... [ 247.563996] PC is at __mutex_lock_slowpath+0x94/0x3a8 ... [ 247.823025] [] (__mutex_lock_slowpath) from [] (mutex_lock+0x20/0x3c) [ 247.831186] [] (mutex_lock) from [] (drm_framebuffer_cleanup+0x18/0x38) [ 247.839520] [] (drm_framebuffer_cleanup) from [] (msm_framebuffer_destroy+0x48/0x100) [ 247.849066] [] (msm_framebuffer_destroy) from [] (msm_framebuffer_init+0x1e8/0x228) [ 247.858439] [] (msm_framebuffer_init) from [] (msm_framebuffer_create+0x70/0x134) [ 247.867642] [] (msm_framebuffer_create) from [] (internal_framebuffer_create+0x67c/0x7b4) [ 247.877537] [] (internal_framebuffer_create) from [] (drm_mode_addfb2+0x20/0x98) [ 247.886650] [] (drm_mode_addfb2) from [] (drm_ioctl+0x240/0x420) [ 247.894378] [] (drm_ioctl) from [] (do_vfs_ioctl+0x4e4/0x5a4) ... Signed-off-by: Stephane Viau [plus initialize msm_fb to NULL to -Rob] Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_fb.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/msm/msm_fb.c b/drivers/gpu/drm/msm/msm_fb.c index 6b573e612f27..121713281417 100644 --- a/drivers/gpu/drm/msm/msm_fb.c +++ b/drivers/gpu/drm/msm/msm_fb.c @@ -172,8 +172,8 @@ struct drm_framebuffer *msm_framebuffer_init(struct drm_device *dev, { struct msm_drm_private *priv = dev->dev_private; struct msm_kms *kms = priv->kms; - struct msm_framebuffer *msm_fb; - struct drm_framebuffer *fb = NULL; + struct msm_framebuffer *msm_fb = NULL; + struct drm_framebuffer *fb; const struct msm_format *format; int ret, i, n; unsigned int hsub, vsub; @@ -239,8 +239,7 @@ struct drm_framebuffer *msm_framebuffer_init(struct drm_device *dev, return fb; fail: - if (fb) - msm_framebuffer_destroy(fb); + kfree(msm_fb); return ERR_PTR(ret); } From ff431fa4d96fc34568454aae4cc264a7760636a8 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Thu, 7 May 2015 15:19:02 -0400 Subject: [PATCH 079/337] drm/msm/dsi: use pr_err_ratelimited When things go badly we can get a lot of these error irqs. Let's not DoS the user. Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dsi/dsi_host.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index a3ff0e296604..47a7f0036478 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -1215,7 +1215,7 @@ static void dsi_err_worker(struct work_struct *work) container_of(work, struct msm_dsi_host, err_work); u32 status = msm_host->err_work_state; - pr_err("%s: status=%x\n", __func__, status); + pr_err_ratelimited("%s: status=%x\n", __func__, status); if (status & DSI_ERR_STATE_MDP_FIFO_UNDERFLOW) dsi_sw_reset_restore(msm_host); From 13f15565f7887a028b3442bbd763ff6d07b48479 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Thu, 7 May 2015 15:20:13 -0400 Subject: [PATCH 080/337] drm/msm: setup vram after component_bind_all() First of all, we don't want -EPROBE_DEFER when trying to bind children to cause us to forget to free our vram. And second we don't want vram allocation fail to trigger _unbind_all() before _bind_all(). Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_drv.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index 72f2b962efd4..cc6485ef2949 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -285,10 +285,6 @@ static int msm_load(struct drm_device *dev, unsigned long flags) drm_mode_config_init(dev); - ret = msm_init_vram(dev); - if (ret) - goto fail; - platform_set_drvdata(pdev, dev); /* Bind all our sub-components: */ @@ -296,6 +292,10 @@ static int msm_load(struct drm_device *dev, unsigned long flags) if (ret) return ret; + ret = msm_init_vram(dev); + if (ret) + goto fail; + switch (get_mdp_ver(pdev)) { case 4: kms = mdp4_kms_init(dev); From 6f6b287968681f660e151c202765da9f58d3dcba Mon Sep 17 00:00:00 2001 From: Hai Li Date: Thu, 23 Apr 2015 14:13:21 -0400 Subject: [PATCH 081/337] drm/msm: Attach assigned encoder to eDP and DSI connectors drm_mode_connector_attach_encoder() function call is missing during eDP and DSI connector initialization. As a result, no encoder is returned by DRM_IOCTL_MODE_GETCONNECTOR system call. This change is to fix this issue. Signed-off-by: Hai Li --- drivers/gpu/drm/msm/dsi/dsi.c | 10 +++++----- drivers/gpu/drm/msm/dsi/dsi_manager.c | 6 +++++- drivers/gpu/drm/msm/edp/edp_connector.c | 2 ++ 3 files changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi.c b/drivers/gpu/drm/msm/dsi/dsi.c index 28d1f95a90cc..ad50b80225f5 100644 --- a/drivers/gpu/drm/msm/dsi/dsi.c +++ b/drivers/gpu/drm/msm/dsi/dsi.c @@ -177,6 +177,11 @@ int msm_dsi_modeset_init(struct msm_dsi *msm_dsi, struct drm_device *dev, goto fail; } + for (i = 0; i < MSM_DSI_ENCODER_NUM; i++) { + encoders[i]->bridge = msm_dsi->bridge; + msm_dsi->encoders[i] = encoders[i]; + } + msm_dsi->connector = msm_dsi_manager_connector_init(msm_dsi->id); if (IS_ERR(msm_dsi->connector)) { ret = PTR_ERR(msm_dsi->connector); @@ -185,11 +190,6 @@ int msm_dsi_modeset_init(struct msm_dsi *msm_dsi, struct drm_device *dev, goto fail; } - for (i = 0; i < MSM_DSI_ENCODER_NUM; i++) { - encoders[i]->bridge = msm_dsi->bridge; - msm_dsi->encoders[i] = encoders[i]; - } - priv->bridges[priv->num_bridges++] = msm_dsi->bridge; priv->connectors[priv->num_connectors++] = msm_dsi->connector; diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c index ee3ebcaa33f5..0a40f3c64e8b 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c @@ -462,7 +462,7 @@ struct drm_connector *msm_dsi_manager_connector_init(u8 id) struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); struct drm_connector *connector = NULL; struct dsi_connector *dsi_connector; - int ret; + int ret, i; dsi_connector = devm_kzalloc(msm_dsi->dev->dev, sizeof(*dsi_connector), GFP_KERNEL); @@ -495,6 +495,10 @@ struct drm_connector *msm_dsi_manager_connector_init(u8 id) if (ret) goto fail; + for (i = 0; i < MSM_DSI_ENCODER_NUM; i++) + drm_mode_connector_attach_encoder(connector, + msm_dsi->encoders[i]); + return connector; fail: diff --git a/drivers/gpu/drm/msm/edp/edp_connector.c b/drivers/gpu/drm/msm/edp/edp_connector.c index d8812e84da54..b4d1b469862a 100644 --- a/drivers/gpu/drm/msm/edp/edp_connector.c +++ b/drivers/gpu/drm/msm/edp/edp_connector.c @@ -151,6 +151,8 @@ struct drm_connector *msm_edp_connector_init(struct msm_edp *edp) if (ret) goto fail; + drm_mode_connector_attach_encoder(connector, edp->encoder); + return connector; fail: From ec1936eb099bb8c1c7a32b9ac4be128e1e68e2d9 Mon Sep 17 00:00:00 2001 From: Hai Li Date: Wed, 29 Apr 2015 11:39:00 -0400 Subject: [PATCH 082/337] drm/msm/dsi: Simplify the code to get the number of read byte During cmd rx, only new versions of H/W provide register to read back the real number of byte returned by panel. For the old versions, reading this register will not get the right number. In fact, we only need to assume the returned data is the same size as we expected, because later we will check the data type to detect error. Signed-off-by: Hai Li --- drivers/gpu/drm/msm/dsi/dsi_host.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index 47a7f0036478..649d20d29f92 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -1093,7 +1093,6 @@ static int dsi_cmd_dma_rx(struct msm_dsi_host *msm_host, { u32 *lp, *temp, data; int i, j = 0, cnt; - bool ack_error = false; u32 read_cnt; u8 reg[16]; int repeated_bytes = 0; @@ -1105,15 +1104,10 @@ static int dsi_cmd_dma_rx(struct msm_dsi_host *msm_host, if (cnt > 4) cnt = 4; /* 4 x 32 bits registers only */ - /* Calculate real read data count */ - read_cnt = dsi_read(msm_host, 0x1d4) >> 16; - - ack_error = (rx_byte == 4) ? - (read_cnt == 8) : /* short pkt + 4-byte error pkt */ - (read_cnt == (pkt_size + 6 + 4)); /* long pkt+4-byte error pkt*/ - - if (ack_error) - read_cnt -= 4; /* Remove 4 byte error pkt */ + if (rx_byte == 4) + read_cnt = 4; + else + read_cnt = pkt_size + 6; /* * In case of multiple reads from the panel, after the first read, there From 91dd93f956b9ea9ecf47fd4b9acd2d2e7f980303 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 12 May 2015 17:24:50 -0700 Subject: [PATCH 083/337] netlink: move nl_table in read_mostly section netlink sockets creation and deletion heavily modify nl_table_users and nl_table_lock. If nl_table is sharing one cache line with one of them, netlink performance is really bad on SMP. ffffffff81ff5f00 B nl_table ffffffff81ff5f0c b nl_table_users Putting nl_table in read_mostly section increased performance of my open/delete netlink sockets test by about 80 % This came up while diagnosing a getaddrinfo() problem. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/netlink/af_netlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index daa0b818174b..dbe885901b34 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -89,7 +89,7 @@ static inline int netlink_is_kernel(struct sock *sk) return nlk_sk(sk)->flags & NETLINK_KERNEL_SOCKET; } -struct netlink_table *nl_table; +struct netlink_table *nl_table __read_mostly; EXPORT_SYMBOL_GPL(nl_table); static DECLARE_WAIT_QUEUE_HEAD(nl_table_wait); From e87a468eb97da35d8dc00e8fa9828b4de4ab69d0 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Thu, 14 May 2015 20:34:08 -0400 Subject: [PATCH 084/337] ipv6: Fix udp checksums with raw sockets It was reported that trancerout6 would cause a kernel to crash when trying to compute checksums on raw UDP packets. The cause was the check in __ip6_append_data that would attempt to use partial checksums on the packet. However, raw sockets do not initialize partial checksum fields so partial checksums can't be used. Solve this the same way IPv4 does it. raw sockets pass transhdrlen value of 0 to ip_append_data which causes the checksum to be computed in software. Use the same check in ip6_append_data (check transhdrlen). Reported-by: Wolfgang Walter CC: Wolfgang Walter CC: Eric Dumazet Signed-off-by: Vladislav Yasevich Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv6/ip6_output.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index c21777565c58..bc09cb97b840 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -1300,8 +1300,10 @@ emsgsize: /* If this is the first and only packet and device * supports checksum offloading, let's use it. + * Use transhdrlen, same as IPv4, because partial + * sums only work when transhdrlen is set. */ - if (!skb && sk->sk_protocol == IPPROTO_UDP && + if (transhdrlen && sk->sk_protocol == IPPROTO_UDP && length + fragheaderlen < mtu && rt->dst.dev->features & NETIF_F_V6_CSUM && !exthdrlen) From c1c52db16e26a26b545821abae303310a074350f Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 14 May 2015 18:17:08 -0500 Subject: [PATCH 085/337] net/mlx4: Avoid 'may be used uninitialized' warnings With a cross-compiler based on gcc-4.9, I see warnings like the following: drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'mlx4_SW2HW_CQ_wrapper': drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:3048:10: error: 'cq' may be used uninitialized in this function [-Werror=maybe-uninitialized] cq->mtt = mtt; I think the warning is spurious because we only use cq when cq_res_start_move_to() returns zero, and it always initializes *cq in that case. The srq case is similar. But maybe gcc isn't smart enough to figure that out. Initialize cq and srq explicitly to avoid the warnings. Signed-off-by: Bjorn Helgaas Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 92fce1b98558..bafe2180cf0c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -3187,7 +3187,7 @@ int mlx4_SW2HW_CQ_wrapper(struct mlx4_dev *dev, int slave, int cqn = vhcr->in_modifier; struct mlx4_cq_context *cqc = inbox->buf; int mtt_base = cq_get_mtt_addr(cqc) / dev->caps.mtt_entry_sz; - struct res_cq *cq; + struct res_cq *cq = NULL; struct res_mtt *mtt; err = cq_res_start_move_to(dev, slave, cqn, RES_CQ_HW, &cq); @@ -3223,7 +3223,7 @@ int mlx4_HW2SW_CQ_wrapper(struct mlx4_dev *dev, int slave, { int err; int cqn = vhcr->in_modifier; - struct res_cq *cq; + struct res_cq *cq = NULL; err = cq_res_start_move_to(dev, slave, cqn, RES_CQ_ALLOCATED, &cq); if (err) @@ -3362,7 +3362,7 @@ int mlx4_SW2HW_SRQ_wrapper(struct mlx4_dev *dev, int slave, int err; int srqn = vhcr->in_modifier; struct res_mtt *mtt; - struct res_srq *srq; + struct res_srq *srq = NULL; struct mlx4_srq_context *srqc = inbox->buf; int mtt_base = srq_get_mtt_addr(srqc) / dev->caps.mtt_entry_sz; @@ -3406,7 +3406,7 @@ int mlx4_HW2SW_SRQ_wrapper(struct mlx4_dev *dev, int slave, { int err; int srqn = vhcr->in_modifier; - struct res_srq *srq; + struct res_srq *srq = NULL; err = srq_res_start_move_to(dev, slave, srqn, RES_SRQ_ALLOCATED, &srq); if (err) From eea39946a1f36e8a5a47c86e7ecfca6076868505 Mon Sep 17 00:00:00 2001 From: Roopa Prabhu Date: Wed, 13 May 2015 21:17:41 -0700 Subject: [PATCH 086/337] rename RTNH_F_EXTERNAL to RTNH_F_OFFLOAD RTNH_F_EXTERNAL today is printed as "offload" in iproute2 output. This patch renames the flag to be consistent with what the user sees. Signed-off-by: Roopa Prabhu Signed-off-by: David S. Miller --- include/uapi/linux/rtnetlink.h | 2 +- net/ipv4/fib_trie.c | 2 +- net/switchdev/switchdev.c | 6 +++--- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h index 974db03f7b1a..17fb02f488da 100644 --- a/include/uapi/linux/rtnetlink.h +++ b/include/uapi/linux/rtnetlink.h @@ -337,7 +337,7 @@ struct rtnexthop { #define RTNH_F_DEAD 1 /* Nexthop is dead (used by multipath) */ #define RTNH_F_PERVASIVE 2 /* Do recursive gateway lookup */ #define RTNH_F_ONLINK 4 /* Gateway is forced on link */ -#define RTNH_F_EXTERNAL 8 /* Route installed externally */ +#define RTNH_F_OFFLOAD 8 /* offloaded route */ /* Macros to handle hexthops */ diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index e13fcc602da2..64c2076ced54 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -1764,7 +1764,7 @@ void fib_table_flush_external(struct fib_table *tb) /* record local slen */ slen = fa->fa_slen; - if (!fi || !(fi->fib_flags & RTNH_F_EXTERNAL)) + if (!fi || !(fi->fib_flags & RTNH_F_OFFLOAD)) continue; netdev_switch_fib_ipv4_del(n->key, diff --git a/net/switchdev/switchdev.c b/net/switchdev/switchdev.c index 46568b85c333..055453d48668 100644 --- a/net/switchdev/switchdev.c +++ b/net/switchdev/switchdev.c @@ -338,7 +338,7 @@ int netdev_switch_fib_ipv4_add(u32 dst, int dst_len, struct fib_info *fi, fi, tos, type, nlflags, tb_id); if (!err) - fi->fib_flags |= RTNH_F_EXTERNAL; + fi->fib_flags |= RTNH_F_OFFLOAD; } return err; @@ -364,7 +364,7 @@ int netdev_switch_fib_ipv4_del(u32 dst, int dst_len, struct fib_info *fi, const struct swdev_ops *ops; int err = 0; - if (!(fi->fib_flags & RTNH_F_EXTERNAL)) + if (!(fi->fib_flags & RTNH_F_OFFLOAD)) return 0; dev = netdev_switch_get_dev_by_nhs(fi); @@ -376,7 +376,7 @@ int netdev_switch_fib_ipv4_del(u32 dst, int dst_len, struct fib_info *fi, err = ops->swdev_fib_ipv4_del(dev, htonl(dst), dst_len, fi, tos, type, tb_id); if (!err) - fi->fib_flags &= ~RTNH_F_EXTERNAL; + fi->fib_flags &= ~RTNH_F_OFFLOAD; } return err; From 63509c60bbc62120fb0e3b287c86ac036b893d90 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Wed, 13 May 2015 09:17:54 +0200 Subject: [PATCH 087/337] target: Fix bidi command handling The function transport_complete_qf() must call either queue_data_in() or queue_status() but not both. Signed-off-by: Bart Van Assche Reviewed-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 3fe5cb240b6f..99a38cf320ff 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1957,8 +1957,7 @@ static void transport_complete_qf(struct se_cmd *cmd) case DMA_TO_DEVICE: if (cmd->se_cmd_flags & SCF_BIDI) { ret = cmd->se_tfo->queue_data_in(cmd); - if (ret < 0) - break; + break; } /* Fall through for DMA_TO_DEVICE */ case DMA_NONE: From 6c2faeaa0ecc67098106771cba8b7ed1e99a1b5f Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Wed, 13 May 2015 09:19:02 +0200 Subject: [PATCH 088/337] target: Add missing parentheses Code like " &= ~CMD_T_BUSY | ..." only clears CMD_T_BUSY but not the other flag. Modify these statements such that both flags are cleared. (Fix fuzz for target_write_prot_action code in mainline - nab) Signed-off-by: Bart Van Assche Reviewed-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 99a38cf320ff..90c92f04a586 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1770,7 +1770,7 @@ static int target_write_prot_action(struct se_cmd *cmd) sectors, 0, NULL, 0); if (unlikely(cmd->pi_err)) { spin_lock_irq(&cmd->t_state_lock); - cmd->transport_state &= ~CMD_T_BUSY|CMD_T_SENT; + cmd->transport_state &= ~(CMD_T_BUSY|CMD_T_SENT); spin_unlock_irq(&cmd->t_state_lock); transport_generic_request_failure(cmd, cmd->pi_err); return -1; @@ -1868,7 +1868,7 @@ void target_execute_cmd(struct se_cmd *cmd) if (target_handle_task_attr(cmd)) { spin_lock_irq(&cmd->t_state_lock); - cmd->transport_state &= ~CMD_T_BUSY|CMD_T_SENT; + cmd->transport_state &= ~(CMD_T_BUSY | CMD_T_SENT); spin_unlock_irq(&cmd->t_state_lock); return; } From ed65918735a50e1002d856749d3f1f5072f92cfa Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 30 Apr 2015 09:29:06 +0300 Subject: [PATCH 089/337] iwlwifi: 7000: modify the firmware name for 3165 3165 really needs to load iwlwifi-7265D-13.ucode. This device is supported starting from -13.ucode, update the MIN and OK defines accordingly. While at it, add 3165 to the device list in the Kconfig file. Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/Kconfig | 1 + drivers/net/wireless/iwlwifi/iwl-7000.c | 16 ++++++++-------- 2 files changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig index ab019b45551b..f89f446e5c8a 100644 --- a/drivers/net/wireless/iwlwifi/Kconfig +++ b/drivers/net/wireless/iwlwifi/Kconfig @@ -21,6 +21,7 @@ config IWLWIFI Intel 7260 Wi-Fi Adapter Intel 3160 Wi-Fi Adapter Intel 7265 Wi-Fi Adapter + Intel 3165 Wi-Fi Adapter This driver uses the kernel's mac80211 subsystem. diff --git a/drivers/net/wireless/iwlwifi/iwl-7000.c b/drivers/net/wireless/iwlwifi/iwl-7000.c index 36e786f0387b..74ad278116be 100644 --- a/drivers/net/wireless/iwlwifi/iwl-7000.c +++ b/drivers/net/wireless/iwlwifi/iwl-7000.c @@ -70,15 +70,14 @@ /* Highest firmware API version supported */ #define IWL7260_UCODE_API_MAX 13 -#define IWL3160_UCODE_API_MAX 13 /* Oldest version we won't warn about */ #define IWL7260_UCODE_API_OK 12 -#define IWL3160_UCODE_API_OK 12 +#define IWL3165_UCODE_API_OK 13 /* Lowest firmware API version supported */ #define IWL7260_UCODE_API_MIN 10 -#define IWL3160_UCODE_API_MIN 10 +#define IWL3165_UCODE_API_MIN 13 /* NVM versions */ #define IWL7260_NVM_VERSION 0x0a1d @@ -104,9 +103,6 @@ #define IWL3160_FW_PRE "iwlwifi-3160-" #define IWL3160_MODULE_FIRMWARE(api) IWL3160_FW_PRE __stringify(api) ".ucode" -#define IWL3165_FW_PRE "iwlwifi-3165-" -#define IWL3165_MODULE_FIRMWARE(api) IWL3165_FW_PRE __stringify(api) ".ucode" - #define IWL7265_FW_PRE "iwlwifi-7265-" #define IWL7265_MODULE_FIRMWARE(api) IWL7265_FW_PRE __stringify(api) ".ucode" @@ -248,8 +244,13 @@ static const struct iwl_ht_params iwl7265_ht_params = { const struct iwl_cfg iwl3165_2ac_cfg = { .name = "Intel(R) Dual Band Wireless AC 3165", - .fw_name_pre = IWL3165_FW_PRE, + .fw_name_pre = IWL7265D_FW_PRE, IWL_DEVICE_7000, + /* sparse doens't like the re-assignment but it is safe */ +#ifndef __CHECKER__ + .ucode_api_ok = IWL3165_UCODE_API_OK, + .ucode_api_min = IWL3165_UCODE_API_MIN, +#endif .ht_params = &iwl7000_ht_params, .nvm_ver = IWL3165_NVM_VERSION, .nvm_calib_ver = IWL3165_TX_POWER_VERSION, @@ -325,6 +326,5 @@ const struct iwl_cfg iwl7265d_n_cfg = { MODULE_FIRMWARE(IWL7260_MODULE_FIRMWARE(IWL7260_UCODE_API_OK)); MODULE_FIRMWARE(IWL3160_MODULE_FIRMWARE(IWL3160_UCODE_API_OK)); -MODULE_FIRMWARE(IWL3165_MODULE_FIRMWARE(IWL3160_UCODE_API_OK)); MODULE_FIRMWARE(IWL7265_MODULE_FIRMWARE(IWL7260_UCODE_API_OK)); MODULE_FIRMWARE(IWL7265D_MODULE_FIRMWARE(IWL7260_UCODE_API_OK)); From 1aa02b5a33506387828f77eb607342a7dfa6beff Mon Sep 17 00:00:00 2001 From: Avri Altman Date: Wed, 29 Apr 2015 05:11:10 +0300 Subject: [PATCH 090/337] iwlwifi: pcie: don't disable the busmaster DMA clock for family 8000 Disabling the clocks is a standard procedure while stopping the device. On family 8000 however, disabling the bus master DMA clock increases the NIC's power consumption. To fix this, skip this call if the device family is IWL_DEVICE_FAMILY_8000. Signed-off-by: Avri Altman Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/pcie/trans.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 47bbf573fdc8..d6f6515fe663 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -1049,9 +1049,11 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power) iwl_pcie_rx_stop(trans); /* Power-down device's busmaster DMA clocks */ - iwl_write_prph(trans, APMG_CLK_DIS_REG, - APMG_CLK_VAL_DMA_CLK_RQT); - udelay(5); + if (trans->cfg->device_family != IWL_DEVICE_FAMILY_8000) { + iwl_write_prph(trans, APMG_CLK_DIS_REG, + APMG_CLK_VAL_DMA_CLK_RQT); + udelay(5); + } } /* Make sure (redundant) we've released our request to stay awake */ From ba830b3d093580f424fd31b7cd693046a86cf030 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 14 May 2015 12:11:38 +0300 Subject: [PATCH 091/337] iwlwifi: mvm: fix MLME trigger A few triggers have status = MLME_SUCCESS and they are still interesting. E.g. if we want to collect data upon deauth, the status will be MLME_SUCCESS. Fix that. Fixes: d42f53503406 ("iwlwifi: mvm: add trigger for firmware dump upon MLME failures") Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 40265b9c66ae..dda9f7b5f342 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -3995,9 +3995,6 @@ static void iwl_mvm_mac_event_callback(struct ieee80211_hw *hw, if (!iwl_fw_dbg_trigger_enabled(mvm->fw, FW_DBG_TRIGGER_MLME)) return; - if (event->u.mlme.status == MLME_SUCCESS) - return; - trig = iwl_fw_dbg_get_trigger(mvm->fw, FW_DBG_TRIGGER_MLME); trig_mlme = (void *)trig->data; if (!iwl_fw_dbg_trigger_check_stop(mvm, vif, trig)) From 1b97937246d8b97c0760d16d8992c7937bdf5e6a Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 15 May 2015 11:02:23 +0100 Subject: [PATCH 092/337] ARM: fix missing syscall trace exit Josh Stone reports: I've discovered a case where both arm and arm64 will miss a ptrace syscall-exit that they should report. If the syscall is entered without TIF_SYSCALL_TRACE set, then it goes on the fast path. It's then possible to have TIF_SYSCALL_TRACE added in the middle of the syscall, but ret_fast_syscall doesn't check this flag again. Fix this by always checking for a syscall trace in the fast exit path. Reported-by: Josh Stone Signed-off-by: Russell King --- arch/arm/kernel/entry-common.S | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index f8ccc21fa032..4e7f40c577e6 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -33,7 +33,9 @@ ret_fast_syscall: UNWIND(.fnstart ) UNWIND(.cantunwind ) disable_irq @ disable interrupts - ldr r1, [tsk, #TI_FLAGS] + ldr r1, [tsk, #TI_FLAGS] @ re-check for syscall tracing + tst r1, #_TIF_SYSCALL_WORK + bne __sys_trace_return tst r1, #_TIF_WORK_MASK bne fast_work_pending asm_trace_hardirqs_on From 774449ebcb18bae146e2b6f6d012b46e64a095b9 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Fri, 15 May 2015 09:19:36 -0400 Subject: [PATCH 093/337] drm/msm: fix locking inconsistencies in gpu->destroy() In error paths, this was being called without struct_mutex held. Leading to panics like: msm 1a00000.qcom,mdss_mdp: No memory protection without IOMMU Kernel panic - not syncing: BUG! CPU: 0 PID: 1409 Comm: cat Not tainted 4.0.0-dirty #4 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) Call trace: [] dump_backtrace+0x0/0x118 [] show_stack+0x10/0x20 [] dump_stack+0x84/0xc4 [] panic+0xd0/0x210 [] drm_gem_object_free+0x5c/0x60 [] adreno_gpu_cleanup+0x60/0x80 [] a3xx_destroy+0x20/0x70 [] a3xx_gpu_init+0x84/0x108 [] adreno_load_gpu+0x58/0x190 [] msm_open+0x74/0x88 [] drm_open+0x168/0x400 [] drm_stub_open+0xa8/0x118 [] chrdev_open+0x94/0x198 [] do_dentry_open+0x208/0x310 [] vfs_open+0x44/0x50 [] do_last.isra.14+0x2c4/0xc10 [] path_openat+0x80/0x5e8 [] do_filp_open+0x2c/0x98 [] do_sys_open+0x13c/0x228 [] SyS_openat+0xc/0x18 CPU1: stopping But there isn't any particularly good reason to hold struct_mutex for teardown, so just standardize on calling it without the mutex held and use the _unlocked() versions for GEM obj unref'ing Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/adreno_gpu.c | 2 +- drivers/gpu/drm/msm/msm_drv.c | 2 +- drivers/gpu/drm/msm/msm_ringbuffer.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c index 94a5bee69fe7..bbdcab0a56c1 100644 --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c @@ -384,7 +384,7 @@ void adreno_gpu_cleanup(struct adreno_gpu *gpu) if (gpu->memptrs_bo) { if (gpu->memptrs_iova) msm_gem_put_iova(gpu->memptrs_bo, gpu->base.id); - drm_gem_object_unreference(gpu->memptrs_bo); + drm_gem_object_unreference_unlocked(gpu->memptrs_bo); } release_firmware(gpu->pm4); release_firmware(gpu->pfp); diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index cc6485ef2949..c80a6bee2b18 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -145,8 +145,8 @@ static int msm_unload(struct drm_device *dev) if (gpu) { mutex_lock(&dev->struct_mutex); gpu->funcs->pm_suspend(gpu); - gpu->funcs->destroy(gpu); mutex_unlock(&dev->struct_mutex); + gpu->funcs->destroy(gpu); } if (priv->vram.paddr) { diff --git a/drivers/gpu/drm/msm/msm_ringbuffer.c b/drivers/gpu/drm/msm/msm_ringbuffer.c index 8171537dd7d1..1f14b908b221 100644 --- a/drivers/gpu/drm/msm/msm_ringbuffer.c +++ b/drivers/gpu/drm/msm/msm_ringbuffer.c @@ -56,6 +56,6 @@ fail: void msm_ringbuffer_destroy(struct msm_ringbuffer *ring) { if (ring->bo) - drm_gem_object_unreference(ring->bo); + drm_gem_object_unreference_unlocked(ring->bo); kfree(ring); } From 86b5e7de07aa1abc87ecc40d2aca6070348e4469 Mon Sep 17 00:00:00 2001 From: Nathan Sullivan Date: Wed, 13 May 2015 17:01:36 -0500 Subject: [PATCH 094/337] net: macb: Add better comment for RXUBR handling Describe the handler for RXUBR better with a new comment. Signed-off-by: Nathan Sullivan Reviewied-by: Josh Cartwright Reviewied-by: Ben Shelton Acked-by: Nicolas Ferre Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index 61aa570aad9a..5f10dfc631d7 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -1037,6 +1037,12 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) * add that if/when we get our hands on a full-blown MII PHY. */ + /* There is a hardware issue under heavy load where DMA can + * stop, this causes endless "used buffer descriptor read" + * interrupts but it can be cleared by re-enabling RX. See + * the at91 manual, section 41.3.1 or the Zynq manual + * section 16.7.4 for details. + */ if (status & MACB_BIT(RXUBR)) { ctrl = macb_readl(bp, NCR); macb_writel(bp, NCR, ctrl & ~MACB_BIT(RE)); From 595ca5880b37d4aa3c292d75531577175d36b225 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Thu, 7 May 2015 14:15:58 +0200 Subject: [PATCH 095/337] netfilter: avoid build error if TPROXY/SOCKET=y && NF_DEFRAG_IPV6=m With TPROXY=y but DEFRAG_IPV6=m we get build failure: net/built-in.o: In function `tproxy_tg_init': net/netfilter/xt_TPROXY.c:588: undefined reference to `nf_defrag_ipv6_enable' If DEFRAG_IPV6 is modular, TPROXY must be too. (or both must be builtin). This enforces =m for both. Reported-and-tested-by: Liu Hua Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index f70e34a68f70..a0f3e6a3c7d1 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -863,6 +863,7 @@ config NETFILTER_XT_TARGET_TPROXY depends on NETFILTER_XTABLES depends on NETFILTER_ADVANCED depends on (IPV6 || IPV6=n) + depends on (IP6_NF_IPTABLES || IP6_NF_IPTABLES=n) depends on IP_NF_MANGLE select NF_DEFRAG_IPV4 select NF_DEFRAG_IPV6 if IP6_NF_IPTABLES @@ -1356,6 +1357,7 @@ config NETFILTER_XT_MATCH_SOCKET depends on NETFILTER_ADVANCED depends on !NF_CONNTRACK || NF_CONNTRACK depends on (IPV6 || IPV6=n) + depends on (IP6_NF_IPTABLES || IP6_NF_IPTABLES=n) select NF_DEFRAG_IPV4 select NF_DEFRAG_IPV6 if IP6_NF_IPTABLES help From b3cad287d13b5f6695c6b4aab72969cd64bf0171 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Thu, 7 May 2015 14:54:16 +0200 Subject: [PATCH 096/337] conntrack: RFC5961 challenge ACK confuse conntrack LAST-ACK transition In compliance with RFC5961, the network stack send challenge ACK in response to spurious SYN packets, since commit 0c228e833c88 ("tcp: Restore RFC5961-compliant behavior for SYN packets"). This pose a problem for netfilter conntrack in state LAST_ACK, because this challenge ACK is (falsely) seen as ACKing last FIN, causing a false state transition (into TIME_WAIT). The challenge ACK is hard to distinguish from real last ACK. Thus, solution introduce a flag that tracks the potential for seeing a challenge ACK, in case a SYN packet is let through and current state is LAST_ACK. When conntrack transition LAST_ACK to TIME_WAIT happens, this flag is used for determining if we are expecting a challenge ACK. Scapy based reproducer script avail here: https://github.com/netoptimizer/network-testing/blob/master/scapy/tcp_hacks_3WHS_LAST_ACK.py Fixes: 0c228e833c88 ("tcp: Restore RFC5961-compliant behavior for SYN packets") Signed-off-by: Jesper Dangaard Brouer Acked-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- .../uapi/linux/netfilter/nf_conntrack_tcp.h | 3 ++ net/netfilter/nf_conntrack_proto_tcp.c | 35 +++++++++++++++++-- 2 files changed, 35 insertions(+), 3 deletions(-) diff --git a/include/uapi/linux/netfilter/nf_conntrack_tcp.h b/include/uapi/linux/netfilter/nf_conntrack_tcp.h index 9993a421201c..ef9f80f0f529 100644 --- a/include/uapi/linux/netfilter/nf_conntrack_tcp.h +++ b/include/uapi/linux/netfilter/nf_conntrack_tcp.h @@ -42,6 +42,9 @@ enum tcp_conntrack { /* The field td_maxack has been set */ #define IP_CT_TCP_FLAG_MAXACK_SET 0x20 +/* Marks possibility for expected RFC5961 challenge ACK */ +#define IP_CT_EXP_CHALLENGE_ACK 0x40 + struct nf_ct_tcp_flags { __u8 flags; __u8 mask; diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c index 5caa0c41bf26..70383de72054 100644 --- a/net/netfilter/nf_conntrack_proto_tcp.c +++ b/net/netfilter/nf_conntrack_proto_tcp.c @@ -202,7 +202,7 @@ static const u8 tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = { * sES -> sES :-) * sFW -> sCW Normal close request answered by ACK. * sCW -> sCW - * sLA -> sTW Last ACK detected. + * sLA -> sTW Last ACK detected (RFC5961 challenged) * sTW -> sTW Retransmitted last ACK. Remain in the same state. * sCL -> sCL */ @@ -261,7 +261,7 @@ static const u8 tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = { * sES -> sES :-) * sFW -> sCW Normal close request answered by ACK. * sCW -> sCW - * sLA -> sTW Last ACK detected. + * sLA -> sTW Last ACK detected (RFC5961 challenged) * sTW -> sTW Retransmitted last ACK. * sCL -> sCL */ @@ -906,6 +906,7 @@ static int tcp_packet(struct nf_conn *ct, 1 : ct->proto.tcp.last_win; ct->proto.tcp.seen[ct->proto.tcp.last_dir].td_scale = ct->proto.tcp.last_wscale; + ct->proto.tcp.last_flags &= ~IP_CT_EXP_CHALLENGE_ACK; ct->proto.tcp.seen[ct->proto.tcp.last_dir].flags = ct->proto.tcp.last_flags; memset(&ct->proto.tcp.seen[dir], 0, @@ -923,7 +924,9 @@ static int tcp_packet(struct nf_conn *ct, * may be in sync but we are not. In that case, we annotate * the TCP options and let the packet go through. If it is a * valid SYN packet, the server will reply with a SYN/ACK, and - * then we'll get in sync. Otherwise, the server ignores it. */ + * then we'll get in sync. Otherwise, the server potentially + * responds with a challenge ACK if implementing RFC5961. + */ if (index == TCP_SYN_SET && dir == IP_CT_DIR_ORIGINAL) { struct ip_ct_tcp_state seen = {}; @@ -939,6 +942,13 @@ static int tcp_packet(struct nf_conn *ct, ct->proto.tcp.last_flags |= IP_CT_TCP_FLAG_SACK_PERM; } + /* Mark the potential for RFC5961 challenge ACK, + * this pose a special problem for LAST_ACK state + * as ACK is intrepretated as ACKing last FIN. + */ + if (old_state == TCP_CONNTRACK_LAST_ACK) + ct->proto.tcp.last_flags |= + IP_CT_EXP_CHALLENGE_ACK; } spin_unlock_bh(&ct->lock); if (LOG_INVALID(net, IPPROTO_TCP)) @@ -970,6 +980,25 @@ static int tcp_packet(struct nf_conn *ct, nf_log_packet(net, pf, 0, skb, NULL, NULL, NULL, "nf_ct_tcp: invalid state "); return -NF_ACCEPT; + case TCP_CONNTRACK_TIME_WAIT: + /* RFC5961 compliance cause stack to send "challenge-ACK" + * e.g. in response to spurious SYNs. Conntrack MUST + * not believe this ACK is acking last FIN. + */ + if (old_state == TCP_CONNTRACK_LAST_ACK && + index == TCP_ACK_SET && + ct->proto.tcp.last_dir != dir && + ct->proto.tcp.last_index == TCP_SYN_SET && + (ct->proto.tcp.last_flags & IP_CT_EXP_CHALLENGE_ACK)) { + /* Detected RFC5961 challenge ACK */ + ct->proto.tcp.last_flags &= ~IP_CT_EXP_CHALLENGE_ACK; + spin_unlock_bh(&ct->lock); + if (LOG_INVALID(net, IPPROTO_TCP)) + nf_log_packet(net, pf, 0, skb, NULL, NULL, NULL, + "nf_ct_tcp: challenge-ACK ignored "); + return NF_ACCEPT; /* Don't change state */ + } + break; case TCP_CONNTRACK_CLOSE: if (index == TCP_RST_SET && (ct->proto.tcp.seen[!dir].flags & IP_CT_TCP_FLAG_MAXACK_SET) From 960bd2c26421d321e890f1936938196ead41976f Mon Sep 17 00:00:00 2001 From: Mirek Kratochvil Date: Fri, 15 May 2015 21:15:29 +0200 Subject: [PATCH 097/337] netfilter: nf_tables: fix bogus warning in nft_data_uninit() The values 0x00000000-0xfffffeff are reserved for userspace datatype. When, deleting set elements with maps, a bogus warning is triggered. WARNING: CPU: 0 PID: 11133 at net/netfilter/nf_tables_api.c:4481 nft_data_uninit+0x35/0x40 [nf_tables]() This fixes the check accordingly to enum definition in include/linux/netfilter/nf_tables.h Fixes: https://bugzilla.netfilter.org/show_bug.cgi?id=1013 Signed-off-by: Mirek Kratochvil Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index ad9d11fb29fd..34ded09317e7 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -4472,9 +4472,9 @@ EXPORT_SYMBOL_GPL(nft_data_init); */ void nft_data_uninit(const struct nft_data *data, enum nft_data_types type) { - switch (type) { - case NFT_DATA_VALUE: + if (type < NFT_DATA_VERDICT) return; + switch (type) { case NFT_DATA_VERDICT: return nft_verdict_uninit(data); default: From 1f9993f6825f9cb93f75f794b66e7428dfc72467 Mon Sep 17 00:00:00 2001 From: Ying Xue Date: Fri, 15 May 2015 12:53:21 +0800 Subject: [PATCH 098/337] rocker: fix a neigh entry leak issue Once we get a neighbour through looking up arp cache or creating a new one in rocker_port_ipv4_resolve(), the neighbour's refcount is already taken. But as we don't put the refcount again after it's used, this makes the neighbour entry leaked. Suggested-by: Eric Dumazet Acked-by: Jiri Pirko Acked-by: Eric Dumazet Signed-off-by: Ying Xue Acked-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/rocker/rocker.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/rocker/rocker.c b/drivers/net/ethernet/rocker/rocker.c index ec251531bd9f..cf98cc9bbc8d 100644 --- a/drivers/net/ethernet/rocker/rocker.c +++ b/drivers/net/ethernet/rocker/rocker.c @@ -2921,10 +2921,11 @@ static int rocker_port_ipv4_resolve(struct rocker_port *rocker_port, struct neighbour *n = __ipv4_neigh_lookup(dev, (__force u32)ip_addr); int err = 0; - if (!n) + if (!n) { n = neigh_create(&arp_tbl, &ip_addr, dev); - if (!n) - return -ENOMEM; + if (IS_ERR(n)) + return IS_ERR(n); + } /* If the neigh is already resolved, then go ahead and * install the entry, otherwise start the ARP process to @@ -2936,6 +2937,7 @@ static int rocker_port_ipv4_resolve(struct rocker_port *rocker_port, else neigh_event_send(n, NULL); + neigh_release(n); return err; } From 7e14069651591c81046ffaec13c3dac8cb70f5fb Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 15 May 2015 16:30:41 -0700 Subject: [PATCH 099/337] net: phy: Allow EEE for all RGMII variants RGMII interfaces come in multiple flavors: RGMII with transmit or receive internal delay, no delays at all, or delays in both direction. This change extends the initial check for PHY_INTERFACE_MODE_RGMII to cover all of these variants since EEE should be allowed for any of these modes, since it is a property of the RGMII, hence Gigabit PHY capability more than the RGMII electrical interface and its delays. Fixes: a59a4d192166 ("phy: add the EEE support and the way to access to the MMD registers") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 52cd8db2c57d..757f28a4284c 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -1053,13 +1053,14 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable) { /* According to 802.3az,the EEE is supported only in full duplex-mode. * Also EEE feature is active when core is operating with MII, GMII - * or RGMII. Internal PHYs are also allowed to proceed and should - * return an error if they do not support EEE. + * or RGMII (all kinds). Internal PHYs are also allowed to proceed and + * should return an error if they do not support EEE. */ if ((phydev->duplex == DUPLEX_FULL) && ((phydev->interface == PHY_INTERFACE_MODE_MII) || (phydev->interface == PHY_INTERFACE_MODE_GMII) || - (phydev->interface == PHY_INTERFACE_MODE_RGMII) || + (phydev->interface >= PHY_INTERFACE_MODE_RGMII && + phydev->interface <= PHY_INTERFACE_MODE_RGMII_TXID) || phy_is_internal(phydev))) { int eee_lp, eee_cap, eee_adv; u32 lp, cap, adv; From c0bb07df7d981e4091432754e30c9c720e2c0c78 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 16 May 2015 21:50:28 +0800 Subject: [PATCH 100/337] netlink: Reset portid after netlink_insert failure The commit c5adde9468b0714a051eac7f9666f23eb10b61f7 ("netlink: eliminate nl_sk_hash_lock") breaks the autobind retry mechanism because it doesn't reset portid after a failed netlink_insert. This means that should autobind fail the first time around, then the socket will be stuck in limbo as it can never be bound again since it already has a non-zero portid. Fixes: c5adde9468b0 ("netlink: eliminate nl_sk_hash_lock") Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/netlink/af_netlink.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index dbe885901b34..bf6e76643f78 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -1081,6 +1081,7 @@ static int netlink_insert(struct sock *sk, u32 portid) if (err) { if (err == -EEXIST) err = -EADDRINUSE; + nlk_sk(sk)->portid = 0; sock_put(sk); } From db9683fb412d4af33f66b9fe3d8dace1c6d113c9 Mon Sep 17 00:00:00 2001 From: Tim Beale Date: Wed, 13 May 2015 13:55:04 +1200 Subject: [PATCH 101/337] net: phy: Make sure PHY_RESUMING state change is always processed If phy_start_aneg() was called while the phydev is in the PHY_RESUMING state, then its state would immediately transition to PHY_AN (or PHY_FORCING). This meant the phy_state_machine() never processed the PHY_RESUMING state change, which meant interrupts weren't enabled for the PHY. If the PHY used low-power mode (i.e. using BMCR_PDOWN), then the physical link wouldn't get powered up again. There seems no point for phy_start_aneg() to make the PHY_RESUMING --> PHY_AN transition, as the state machine will do this anyway. I'm not sure about the case where autoneg is disabled, as my patch will change behaviour so that the PHY goes to PHY_NOLINK instead of PHY_FORCING. An alternative solution would be to move the phy_config_interrupt() and phy_resume() work out of the state machine and into phy_start(). The background behind this: we're running linux v3.16.7 and from user-space we want to enable the eth port (i.e. do a SIOCSIFFLAGS ioctl with the IFF_UP flag) and immediately afterward set the interface's speed/duplex. Enabling the interface calls .ndo_open() then phy_start() and the PHY transitions PHY_HALTED --> PHY_RESUMING. Setting the speed/duplex ends up calling phy_ethtool_sset(), which calls phy_start_aneg() (meanwhile the phy_state_machine() hasn't processed the PHY_RESUMING state change yet). Signed-off-by: Tim Beale Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 757f28a4284c..710696d1af97 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -465,7 +465,7 @@ int phy_start_aneg(struct phy_device *phydev) if (err < 0) goto out_unlock; - if (phydev->state != PHY_HALTED) { + if (phydev->state != PHY_HALTED && phydev->state != PHY_RESUMING) { if (AUTONEG_ENABLE == phydev->autoneg) { phydev->state = PHY_AN; phydev->link_timeout = PHY_AN_TIMEOUT; From 07ee0722bf941960fb3888f9c9b5839473372fd1 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 15 May 2015 11:30:47 +0800 Subject: [PATCH 102/337] rhashtable: Add cap on number of elements in hash table We currently have no limit on the number of elements in a hash table. This is a problem because some users (tipc) set a ceiling on the maximum table size and when that is reached the hash table may degenerate. Others may encounter OOM when growing and if we allow insertions when that happens the hash table perofrmance may also suffer. This patch adds a new paramater insecure_max_entries which becomes the cap on the table. If unset it defaults to max_size * 2. If it is also zero it means that there is no cap on the number of elements in the table. However, the table will grow whenever the utilisation hits 100% and if that growth fails, you will get ENOMEM on insertion. As allowing oversubscription is potentially dangerous, the name contains the word insecure. Note that the cap is not a hard limit. This is done for performance reasons as enforcing a hard limit will result in use of atomic ops that are heavier than the ones we currently use. The reasoning is that we're only guarding against a gross over- subscription of the table, rather than a small breach of the limit. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- include/linux/rhashtable.h | 19 +++++++++++++++++++ lib/rhashtable.c | 11 +++++++++++ 2 files changed, 30 insertions(+) diff --git a/include/linux/rhashtable.h b/include/linux/rhashtable.h index dbcbcc59aa92..843ceca9a21e 100644 --- a/include/linux/rhashtable.h +++ b/include/linux/rhashtable.h @@ -17,6 +17,7 @@ #ifndef _LINUX_RHASHTABLE_H #define _LINUX_RHASHTABLE_H +#include #include #include #include @@ -100,6 +101,7 @@ struct rhashtable; * @key_len: Length of key * @key_offset: Offset of key in struct to be hashed * @head_offset: Offset of rhash_head in struct to be hashed + * @insecure_max_entries: Maximum number of entries (may be exceeded) * @max_size: Maximum size while expanding * @min_size: Minimum size while shrinking * @nulls_base: Base value to generate nulls marker @@ -115,6 +117,7 @@ struct rhashtable_params { size_t key_len; size_t key_offset; size_t head_offset; + unsigned int insecure_max_entries; unsigned int max_size; unsigned int min_size; u32 nulls_base; @@ -286,6 +289,18 @@ static inline bool rht_grow_above_100(const struct rhashtable *ht, (!ht->p.max_size || tbl->size < ht->p.max_size); } +/** + * rht_grow_above_max - returns true if table is above maximum + * @ht: hash table + * @tbl: current table + */ +static inline bool rht_grow_above_max(const struct rhashtable *ht, + const struct bucket_table *tbl) +{ + return ht->p.insecure_max_entries && + atomic_read(&ht->nelems) >= ht->p.insecure_max_entries; +} + /* The bucket lock is selected based on the hash and protects mutations * on a group of hash buckets. * @@ -589,6 +604,10 @@ restart: goto out; } + err = -E2BIG; + if (unlikely(rht_grow_above_max(ht, tbl))) + goto out; + if (unlikely(rht_grow_above_100(ht, tbl))) { slow_path: spin_unlock_bh(lock); diff --git a/lib/rhashtable.c b/lib/rhashtable.c index b28df4019ade..4396434e4715 100644 --- a/lib/rhashtable.c +++ b/lib/rhashtable.c @@ -14,6 +14,7 @@ * published by the Free Software Foundation. */ +#include #include #include #include @@ -446,6 +447,10 @@ int rhashtable_insert_slow(struct rhashtable *ht, const void *key, if (key && rhashtable_lookup_fast(ht, key, ht->p)) goto exit; + err = -E2BIG; + if (unlikely(rht_grow_above_max(ht, tbl))) + goto exit; + err = -EAGAIN; if (rhashtable_check_elasticity(ht, tbl, hash) || rht_grow_above_100(ht, tbl)) @@ -738,6 +743,12 @@ int rhashtable_init(struct rhashtable *ht, if (params->max_size) ht->p.max_size = rounddown_pow_of_two(params->max_size); + if (params->insecure_max_entries) + ht->p.insecure_max_entries = + rounddown_pow_of_two(params->insecure_max_entries); + else + ht->p.insecure_max_entries = ht->p.max_size * 2; + ht->p.min_size = max(ht->p.min_size, HASH_MIN_SIZE); /* The maximum (not average) chain length grows with the From ed2a80ab7b76f11af0b2c6255709c4ebf164b667 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Wed, 13 May 2015 14:19:42 +0200 Subject: [PATCH 103/337] rtnl/bond: don't send rtnl msg for unregistered iface Before the patch, the command 'ip link add bond2 type bond mode 802.3ad' causes the kernel to send a rtnl message for the bond2 interface, with an ifindex 0. 'ip monitor' shows: 0: bond2: mtu 1500 state DOWN group default link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 9: bond2@NONE: mtu 1500 qdisc noop state DOWN group default link/ether ea:3e:1f:53:92:7b brd ff:ff:ff:ff:ff:ff [snip] The patch fixes the spotted bug by checking in bond driver if the interface is registered before calling the notifier chain. It also adds a check in rtmsg_ifinfo() to prevent this kind of bug in the future. Fixes: d4261e565000 ("bonding: create netlink event when bonding option is changed") CC: Jiri Pirko Reported-by: Julien Meunier Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- drivers/net/bonding/bond_options.c | 2 +- net/core/rtnetlink.c | 3 +++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c index 4df28943d222..e8d3c1d35453 100644 --- a/drivers/net/bonding/bond_options.c +++ b/drivers/net/bonding/bond_options.c @@ -624,7 +624,7 @@ int __bond_opt_set(struct bonding *bond, out: if (ret) bond_opt_error_interpret(bond, opt, ret, val); - else + else if (bond->dev->reg_state == NETREG_REGISTERED) call_netdevice_notifiers(NETDEV_CHANGEINFODATA, bond->dev); return ret; diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 666e0928ba40..8de36824018d 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -2416,6 +2416,9 @@ void rtmsg_ifinfo(int type, struct net_device *dev, unsigned int change, { struct sk_buff *skb; + if (dev->reg_state != NETREG_REGISTERED) + return; + skb = rtmsg_ifinfo_build_skb(type, dev, change, flags); if (skb) rtmsg_ifinfo_send(skb, dev, flags); From 21858cd02dabcf290564cbf4769b101eba54d7bb Mon Sep 17 00:00:00 2001 From: Florent Fourcot Date: Sat, 16 May 2015 00:24:59 +0200 Subject: [PATCH 104/337] tcp/ipv6: fix flow label setting in TIME_WAIT state commit 1d13a96c74fc ("ipv6: tcp: fix flowlabel value in ACK messages send from TIME_WAIT") added the flow label in the last TCP packets. Unfortunately, it was not casted properly. This patch replace the buggy shift with be32_to_cpu/cpu_to_be32. Fixes: 1d13a96c74fc ("ipv6: tcp: fix flowlabel value in ACK messages") Reported-by: Eric Dumazet Signed-off-by: Florent Fourcot Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp_minisocks.c | 2 +- net/ipv6/tcp_ipv6.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c index e5d7649136fc..b5732a54f2ad 100644 --- a/net/ipv4/tcp_minisocks.c +++ b/net/ipv4/tcp_minisocks.c @@ -300,7 +300,7 @@ void tcp_time_wait(struct sock *sk, int state, int timeo) tw->tw_v6_daddr = sk->sk_v6_daddr; tw->tw_v6_rcv_saddr = sk->sk_v6_rcv_saddr; tw->tw_tclass = np->tclass; - tw->tw_flowlabel = np->flow_label >> 12; + tw->tw_flowlabel = be32_to_cpu(np->flow_label & IPV6_FLOWLABEL_MASK); tw->tw_ipv6only = sk->sk_ipv6only; } #endif diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index b6575d665568..3adffb300238 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -914,7 +914,7 @@ static void tcp_v6_timewait_ack(struct sock *sk, struct sk_buff *skb) tcptw->tw_rcv_wnd >> tw->tw_rcv_wscale, tcp_time_stamp + tcptw->tw_ts_offset, tcptw->tw_ts_recent, tw->tw_bound_dev_if, tcp_twsk_md5_key(tcptw), - tw->tw_tclass, (tw->tw_flowlabel << 12)); + tw->tw_tclass, cpu_to_be32(tw->tw_flowlabel)); inet_twsk_put(tw); } From 7b2a18e05feb86f9be25602abfa9604a6b977f79 Mon Sep 17 00:00:00 2001 From: Tadeusz Struk Date: Fri, 15 May 2015 10:18:37 -0700 Subject: [PATCH 105/337] crypto: algif_aead - fix invalid sgl linking This patch fixes it. Also minor updates to comments. Signed-off-by: Tadeusz Struk Signed-off-by: Herbert Xu --- crypto/algif_aead.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/crypto/algif_aead.c b/crypto/algif_aead.c index 00a6fe166fed..69abada22373 100644 --- a/crypto/algif_aead.c +++ b/crypto/algif_aead.c @@ -33,7 +33,7 @@ struct aead_ctx { /* * RSGL_MAX_ENTRIES is an artificial limit where user space at maximum * can cause the kernel to allocate RSGL_MAX_ENTRIES * ALG_MAX_PAGES - * bytes + * pages */ #define RSGL_MAX_ENTRIES ALG_MAX_PAGES struct af_alg_sgl rsgl[RSGL_MAX_ENTRIES]; @@ -435,11 +435,10 @@ static int aead_recvmsg(struct socket *sock, struct msghdr *msg, size_t ignored, if (err < 0) goto unlock; usedpages += err; - /* chain the new scatterlist with initial list */ + /* chain the new scatterlist with previous one */ if (cnt) - scatterwalk_crypto_chain(ctx->rsgl[0].sg, - ctx->rsgl[cnt].sg, 1, - sg_nents(ctx->rsgl[cnt-1].sg)); + af_alg_link_sg(&ctx->rsgl[cnt-1], &ctx->rsgl[cnt]); + /* we do not need more iovecs as we have sufficient memory */ if (outlen <= usedpages) break; From 1f8b46cdc806dfd76386f8442d9a6d0ae69abb25 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Tue, 12 May 2015 14:38:15 +0200 Subject: [PATCH 106/337] ALSA: hda - Fix headset mic and mic-in for a Dell desktop ALC662 does not need any special verbs to change the jack functionality, and enables mic in through the headphone jack mode by changing the direction of the headphone pin node. BugLink: https://bugs.launchpad.net/bugs/1454235 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 46 ++++++++++++++++++++++++++++++++++- 1 file changed, 45 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 37c2c9f91df0..4202a80db2ce 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3674,6 +3674,10 @@ static void alc_headset_mode_mic_in(struct hda_codec *codec, hda_nid_t hp_pin, alc_process_coef_fw(codec, coef0293); snd_hda_set_pin_ctl_cache(codec, mic_pin, PIN_VREF50); break; + case 0x10ec0662: + snd_hda_set_pin_ctl_cache(codec, hp_pin, 0); + snd_hda_set_pin_ctl_cache(codec, mic_pin, PIN_VREF50); + break; case 0x10ec0668: alc_write_coef_idx(codec, 0x11, 0x0001); snd_hda_set_pin_ctl_cache(codec, hp_pin, 0); @@ -4012,7 +4016,7 @@ static void alc_update_headset_mode(struct hda_codec *codec) if (new_headset_mode != ALC_HEADSET_MODE_MIC) { snd_hda_set_pin_ctl_cache(codec, hp_pin, AC_PINCTL_OUT_EN | AC_PINCTL_HP_EN); - if (spec->headphone_mic_pin) + if (spec->headphone_mic_pin && spec->headphone_mic_pin != hp_pin) snd_hda_set_pin_ctl_cache(codec, spec->headphone_mic_pin, PIN_VREFHIZ); } @@ -4215,6 +4219,18 @@ static void alc_fixup_dell_xps13(struct hda_codec *codec, } } +static void alc_fixup_headset_mode_alc662(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + struct alc_spec *spec = codec->spec; + + if (action == HDA_FIXUP_ACT_PRE_PROBE) { + spec->parse_flags |= HDA_PINCFG_HEADSET_MIC; + spec->gen.hp_mic = 1; /* Mic-in is same pin as headphone */ + } else + alc_fixup_headset_mode(codec, fix, action); +} + static void alc_fixup_headset_mode_alc668(struct hda_codec *codec, const struct hda_fixup *fix, int action) { @@ -6087,7 +6103,9 @@ enum { ALC662_FIXUP_NO_JACK_DETECT, ALC662_FIXUP_ZOTAC_Z68, ALC662_FIXUP_INV_DMIC, + ALC662_FIXUP_DELL_MIC_NO_PRESENCE, ALC668_FIXUP_DELL_MIC_NO_PRESENCE, + ALC662_FIXUP_HEADSET_MODE, ALC668_FIXUP_HEADSET_MODE, ALC662_FIXUP_BASS_MODE4_CHMAP, ALC662_FIXUP_BASS_16, @@ -6280,6 +6298,20 @@ static const struct hda_fixup alc662_fixups[] = { .chained = true, .chain_id = ALC668_FIXUP_DELL_MIC_NO_PRESENCE }, + [ALC662_FIXUP_DELL_MIC_NO_PRESENCE] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x19, 0x03a1113c }, /* use as headset mic, without its own jack detect */ + /* headphone mic by setting pin control of 0x1b (headphone out) to in + vref_50 */ + { } + }, + .chained = true, + .chain_id = ALC662_FIXUP_HEADSET_MODE + }, + [ALC662_FIXUP_HEADSET_MODE] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_headset_mode_alc662, + }, [ALC668_FIXUP_DELL_MIC_NO_PRESENCE] = { .type = HDA_FIXUP_PINS, .v.pins = (const struct hda_pintbl[]) { @@ -6431,6 +6463,18 @@ static const struct hda_model_fixup alc662_fixup_models[] = { }; static const struct snd_hda_pin_quirk alc662_pin_fixup_tbl[] = { + SND_HDA_PIN_QUIRK(0x10ec0662, 0x1028, "Dell", ALC662_FIXUP_DELL_MIC_NO_PRESENCE, + {0x12, 0x4004c000}, + {0x14, 0x01014010}, + {0x15, 0x411111f0}, + {0x16, 0x411111f0}, + {0x18, 0x01a19020}, + {0x19, 0x411111f0}, + {0x1a, 0x0181302f}, + {0x1b, 0x0221401f}, + {0x1c, 0x411111f0}, + {0x1d, 0x4054c601}, + {0x1e, 0x411111f0}), SND_HDA_PIN_QUIRK(0x10ec0668, 0x1028, "Dell", ALC668_FIXUP_AUTO_MUTE, {0x12, 0x99a30130}, {0x14, 0x90170110}, From 6ffc0898b29a2811a6c0569c5dd9b581980110df Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Wed, 13 May 2015 13:28:54 +0200 Subject: [PATCH 107/337] ALSA: hda - Add Conexant codecs CX20721, CX20722, CX20723 and CX20724 This patch adds support for Conexant HD Audio codecs CX20721, CX20722, CX20723 and CX20724. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1454656 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index f8f0dfbef149..78b719b5b34d 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -968,6 +968,14 @@ static const struct hda_codec_preset snd_hda_preset_conexant[] = { .patch = patch_conexant_auto }, { .id = 0x14f150b9, .name = "CX20665", .patch = patch_conexant_auto }, + { .id = 0x14f150f1, .name = "CX20721", + .patch = patch_conexant_auto }, + { .id = 0x14f150f2, .name = "CX20722", + .patch = patch_conexant_auto }, + { .id = 0x14f150f3, .name = "CX20723", + .patch = patch_conexant_auto }, + { .id = 0x14f150f4, .name = "CX20724", + .patch = patch_conexant_auto }, { .id = 0x14f1510f, .name = "CX20751/2", .patch = patch_conexant_auto }, { .id = 0x14f15110, .name = "CX20751/2", @@ -1002,6 +1010,10 @@ MODULE_ALIAS("snd-hda-codec-id:14f150ab"); MODULE_ALIAS("snd-hda-codec-id:14f150ac"); MODULE_ALIAS("snd-hda-codec-id:14f150b8"); MODULE_ALIAS("snd-hda-codec-id:14f150b9"); +MODULE_ALIAS("snd-hda-codec-id:14f150f1"); +MODULE_ALIAS("snd-hda-codec-id:14f150f2"); +MODULE_ALIAS("snd-hda-codec-id:14f150f3"); +MODULE_ALIAS("snd-hda-codec-id:14f150f4"); MODULE_ALIAS("snd-hda-codec-id:14f1510f"); MODULE_ALIAS("snd-hda-codec-id:14f15110"); MODULE_ALIAS("snd-hda-codec-id:14f15111"); From 09ea997677cd44ebe7f42573119aaf46b775c683 Mon Sep 17 00:00:00 2001 From: Ansgar Hegerfeld Date: Thu, 14 May 2015 12:31:32 +0200 Subject: [PATCH 108/337] ALSA: hda/realtek - ALC292 dock fix for Thinkpad L450 The Lenovo ThinkPad L450 requires the ALC292_FIXUP_TPT440_DOCK fix in order to get sound output on the docking stations audio port. This patch was tested using a ThinkPad L450 (20DSS00B00) using kernel 4.0.3 and a ThinkPad Pro Dock. Signed-off-by: Ansgar Hegerfeld Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 4202a80db2ce..2e246fe495f6 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5165,6 +5165,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x5026, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x17aa, 0x5034, "Thinkpad T450", ALC292_FIXUP_TPT440_DOCK), SND_PCI_QUIRK(0x17aa, 0x5036, "Thinkpad T450s", ALC292_FIXUP_TPT440_DOCK), + SND_PCI_QUIRK(0x17aa, 0x503c, "Thinkpad L450", ALC292_FIXUP_TPT440_DOCK), SND_PCI_QUIRK(0x17aa, 0x5109, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_PCM_44K), SND_PCI_QUIRK(0x17aa, 0x9e54, "LENOVO NB", ALC269_FIXUP_LENOVO_EAPD), From 60c8f783a18feb95ad967c87e9660caf09fb4700 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Wed, 6 May 2015 15:16:46 +0200 Subject: [PATCH 109/337] mmc: atmel-mci: fix bad variable type for clkdiv clkdiv is declared as an u32 but it can be set to a negative value causing a huge divisor value. Change its type to int to avoid this case. Signed-off-by: Ludovic Desroches Cc: # 3.4 and later Signed-off-by: Ulf Hansson --- drivers/mmc/host/atmel-mci.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 03d7c7521d97..9a39e0b7e583 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -1304,7 +1304,7 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (ios->clock) { unsigned int clock_min = ~0U; - u32 clkdiv; + int clkdiv; spin_lock_bh(&host->lock); if (!host->mode_reg) { @@ -1328,7 +1328,12 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) /* Calculate clock divider */ if (host->caps.has_odd_clk_div) { clkdiv = DIV_ROUND_UP(host->bus_hz, clock_min) - 2; - if (clkdiv > 511) { + if (clkdiv < 0) { + dev_warn(&mmc->class_dev, + "clock %u too fast; using %lu\n", + clock_min, host->bus_hz / 2); + clkdiv = 0; + } else if (clkdiv > 511) { dev_warn(&mmc->class_dev, "clock %u too slow; using %lu\n", clock_min, host->bus_hz / (511 + 2)); From 17fea54bf0ab34fa09a06bbde2f58ed7bbdf9299 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Mon, 18 May 2015 10:07:17 +0200 Subject: [PATCH 110/337] x86/mce: Fix MCE severity messages Derek noticed that a critical MCE gets reported with the wrong error type description: [Hardware Error]: CPU 34: Machine Check Exception: 5 Bank 9: f200003f000100b0 [Hardware Error]: RIP !INEXACT! 10: {intel_idle+0xb1/0x170} [Hardware Error]: TSC 49587b8e321cb [Hardware Error]: PROCESSOR 0:306e4 TIME 1431561296 SOCKET 1 APIC 29 [Hardware Error]: Some CPUs didn't answer in synchronization [Hardware Error]: Machine check: Invalid ^^^^^^^ The last line with 'Invalid' should have printed the high level MCE error type description we get from mce_severity, i.e. something like: [Hardware Error]: Machine check: Action required: data load error in a user process this happens due to the fact that mce_no_way_out() iterates over all MCA banks and possibly overwrites the @msg argument which is used in the panic printing later. Change behavior to take the message of only and the (last) critical MCE it detects. Reported-by: Derek Signed-off-by: Borislav Petkov Cc: Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Tony Luck Link: http://lkml.kernel.org/r/1431936437-25286-3-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mcheck/mce.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index e535533d5ab8..20190bdac9d5 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -708,6 +708,7 @@ static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp, struct pt_regs *regs) { int i, ret = 0; + char *tmp; for (i = 0; i < mca_cfg.banks; i++) { m->status = mce_rdmsrl(MSR_IA32_MCx_STATUS(i)); @@ -716,9 +717,11 @@ static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp, if (quirk_no_way_out) quirk_no_way_out(i, m, regs); } - if (mce_severity(m, mca_cfg.tolerant, msg, true) >= - MCE_PANIC_SEVERITY) + + if (mce_severity(m, mca_cfg.tolerant, &tmp, true) >= MCE_PANIC_SEVERITY) { + *msg = tmp; ret = 1; + } } return ret; } From ea8e080b604e2c8221af778221d83a59b6529c5b Mon Sep 17 00:00:00 2001 From: Aravind Gopalakrishnan Date: Mon, 18 May 2015 10:07:16 +0200 Subject: [PATCH 111/337] x86/Documentation: Update the contact email for L3 cache index disable functionality The mailing list discuss@x86-64.org is now defunct. Use the lkml in its place. Signed-off-by: Aravind Gopalakrishnan Signed-off-by: Borislav Petkov Cc: Greg KH Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-api@vger.kernel.org Cc: sboyd@codeaurora.org Cc: sudeep.holla@arm.com Link: http://lkml.kernel.org/r/1431125098-9470-1-git-send-email-Aravind.Gopalakrishnan@amd.com Link: http://lkml.kernel.org/r/1431936437-25286-2-git-send-email-bp@alien8.de [ Changed the contact email to lkml. ] Signed-off-by: Ingo Molnar --- Documentation/ABI/testing/sysfs-devices-system-cpu | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 99983e67c13c..da95513571ea 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -162,7 +162,7 @@ Description: Discover CPUs in the same CPU frequency coordination domain What: /sys/devices/system/cpu/cpu*/cache/index3/cache_disable_{0,1} Date: August 2008 KernelVersion: 2.6.27 -Contact: discuss@x86-64.org +Contact: Linux kernel mailing list Description: Disable L3 cache indices These files exist in every CPU's cache/index3 directory. Each From ffb7dbed47da6ac4460b606a3feee295bbe4d9e2 Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Thu, 7 May 2015 12:55:23 -0400 Subject: [PATCH 112/337] xen/arm: Define xen_arch_suspend() Commit 2b953a5e994c ("xen: Suspend ticks on all CPUs during suspend") introduced xen_arch_suspend() routine but did so only for x86, breaking ARM builds. We need to add it to ARM as well. Signed-off-by: Boris Ostrovsky Reported-by: Michal Suchanek Tested-by: Stefano Stabellini Signed-off-by: David Vrabel --- arch/arm/xen/enlighten.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 224081ccc92f..7d0f07020c80 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -272,6 +272,7 @@ void xen_arch_pre_suspend(void) { } void xen_arch_post_suspend(int suspend_cancelled) { } void xen_timer_resume(void) { } void xen_arch_resume(void) { } +void xen_arch_suspend(void) { } /* In the hypervisor.S file. */ From 314fdf4473bc05fa9a1f33b27b98eb0f0c836f71 Mon Sep 17 00:00:00 2001 From: Selvin Xavier Date: Tue, 19 May 2015 11:32:32 +0530 Subject: [PATCH 113/337] RDMA/ocrdma: Fix EQ destroy failure during driver unload Changing the destroy sequence of mailbox queue and event queues. FW expects mailbox queue to be destroyed before desroying the EQs. Signed-off-by: Selvin Xavier Signed-off-by: Devesh Sharma Signed-off-by: Doug Ledford --- drivers/infiniband/hw/ocrdma/ocrdma_hw.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c index 0c9e95909a64..3a5ea5afc2a2 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c @@ -3147,9 +3147,9 @@ void ocrdma_cleanup_hw(struct ocrdma_dev *dev) ocrdma_free_pd_pool(dev); ocrdma_mbx_delete_ah_tbl(dev); - /* cleanup the eqs */ - ocrdma_destroy_eqs(dev); - /* cleanup the control path */ ocrdma_destroy_mq(dev); + + /* cleanup the eqs */ + ocrdma_destroy_eqs(dev); } From 5e6f9237f8e676e8a9110b4dafed36b1dd0b5d84 Mon Sep 17 00:00:00 2001 From: Devesh Sharma Date: Tue, 19 May 2015 11:32:33 +0530 Subject: [PATCH 114/337] RDMA/ocrdma: Report EQ full fatal error Detect when Event Queue (EQ) becomes full and print a warning message. Signed-off-by: Devesh Sharma Signed-off-by: Selvin Xavier Signed-off-by: Doug Ledford --- drivers/infiniband/hw/ocrdma/ocrdma_hw.c | 6 ++++++ drivers/infiniband/hw/ocrdma/ocrdma_sli.h | 7 +++++++ 2 files changed, 13 insertions(+) diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c index 3a5ea5afc2a2..65759acb12dc 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c @@ -933,12 +933,18 @@ static irqreturn_t ocrdma_irq_handler(int irq, void *handle) struct ocrdma_eqe eqe; struct ocrdma_eqe *ptr; u16 cq_id; + u8 mcode; int budget = eq->cq_cnt; do { ptr = ocrdma_get_eqe(eq); eqe = *ptr; ocrdma_le32_to_cpu(&eqe, sizeof(eqe)); + mcode = (eqe.id_valid & OCRDMA_EQE_MAJOR_CODE_MASK) + >> OCRDMA_EQE_MAJOR_CODE_SHIFT; + if (mcode == OCRDMA_MAJOR_CODE_SENTINAL) + pr_err("EQ full on eqid = 0x%x, eqe = 0x%x\n", + eq->q.id, eqe.id_valid); if ((eqe.id_valid & OCRDMA_EQE_VALID_MASK) == 0) break; diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_sli.h b/drivers/infiniband/hw/ocrdma/ocrdma_sli.h index 243c87c8bd65..baf9b8a0f278 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_sli.h +++ b/drivers/infiniband/hw/ocrdma/ocrdma_sli.h @@ -1624,12 +1624,19 @@ struct ocrdma_delete_ah_tbl_rsp { enum { OCRDMA_EQE_VALID_SHIFT = 0, OCRDMA_EQE_VALID_MASK = BIT(0), + OCRDMA_EQE_MAJOR_CODE_MASK = 0x0E, + OCRDMA_EQE_MAJOR_CODE_SHIFT = 0x01, OCRDMA_EQE_FOR_CQE_MASK = 0xFFFE, OCRDMA_EQE_RESOURCE_ID_SHIFT = 16, OCRDMA_EQE_RESOURCE_ID_MASK = 0xFFFF << OCRDMA_EQE_RESOURCE_ID_SHIFT, }; +enum major_code { + OCRDMA_MAJOR_CODE_COMPLETION = 0x00, + OCRDMA_MAJOR_CODE_SENTINAL = 0x01 +}; + struct ocrdma_eqe { u32 id_valid; }; From fe48822bc6d5b455aab963038a9c776d641645cc Mon Sep 17 00:00:00 2001 From: Devesh Sharma Date: Tue, 19 May 2015 11:32:34 +0530 Subject: [PATCH 115/337] RDMA/ocrdma: Fix QP state transition in destroy_qp Don't move QP to error state, if QP is in reset state during QP destroy operation. Signed-off-by: Devesh Sharma Signed-off-by: Selvin Xavier Signed-off-by: Doug Ledford --- drivers/infiniband/hw/ocrdma/ocrdma_verbs.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c index 877175563634..06e8ab7825b9 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c @@ -1721,18 +1721,20 @@ int ocrdma_destroy_qp(struct ib_qp *ibqp) struct ocrdma_qp *qp; struct ocrdma_dev *dev; struct ib_qp_attr attrs; - int attr_mask = IB_QP_STATE; + int attr_mask; unsigned long flags; qp = get_ocrdma_qp(ibqp); dev = get_ocrdma_dev(ibqp->device); - attrs.qp_state = IB_QPS_ERR; pd = qp->pd; /* change the QP state to ERROR */ - _ocrdma_modify_qp(ibqp, &attrs, attr_mask); - + if (qp->state != OCRDMA_QPS_RST) { + attrs.qp_state = IB_QPS_ERR; + attr_mask = IB_QP_STATE; + _ocrdma_modify_qp(ibqp, &attrs, attr_mask); + } /* ensure that CQEs for newly created QP (whose id may be same with * one which just getting destroyed are same), dont get * discarded until the old CQEs are discarded. From 6f5deab0bed6bcfad0dbafcb40a1e269a01ab01d Mon Sep 17 00:00:00 2001 From: Devesh Sharma Date: Tue, 19 May 2015 11:32:35 +0530 Subject: [PATCH 116/337] RDMA/ocrdma: Use VID 0 if PFC is enabled and vlan is not configured If the adapter ports are in PFC mode and VLAN is not configured, use vlan tag 0 for RoCE traffic. Also, log an advisory message in system logs. Signed-off-by: Padmanabh Ratnakar Signed-off-by: Devesh Sharma Signed-off-by: Selvin Xavier Signed-off-by: Doug Ledford --- drivers/infiniband/hw/ocrdma/ocrdma_ah.c | 8 +++++++- drivers/infiniband/hw/ocrdma/ocrdma_hw.c | 12 +++++++++++- 2 files changed, 18 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_ah.c b/drivers/infiniband/hw/ocrdma/ocrdma_ah.c index d812904f3984..2a5993b75651 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_ah.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_ah.c @@ -56,7 +56,13 @@ static inline int set_av_attr(struct ocrdma_dev *dev, struct ocrdma_ah *ah, vlan_tag = attr->vlan_id; if (!vlan_tag || (vlan_tag > 0xFFF)) vlan_tag = dev->pvid; - if (vlan_tag && (vlan_tag < 0x1000)) { + if (vlan_tag || dev->pfc_state) { + if (!vlan_tag) { + pr_err("ocrdma%d:Using VLAN with PFC is recommended\n", + dev->id); + pr_err("ocrdma%d:Using VLAN 0 for this connection\n", + dev->id); + } eth.eth_type = cpu_to_be16(0x8100); eth.roce_eth_type = cpu_to_be16(OCRDMA_ROCE_ETH_TYPE); vlan_tag |= (dev->sl & 0x07) << OCRDMA_VID_PCP_SHIFT; diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c index 65759acb12dc..da688d78fc02 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c @@ -2434,7 +2434,7 @@ static int ocrdma_set_av_params(struct ocrdma_qp *qp, int status; struct ib_ah_attr *ah_attr = &attrs->ah_attr; union ib_gid sgid, zgid; - u32 vlan_id; + u32 vlan_id = 0xFFFF; u8 mac_addr[6]; struct ocrdma_dev *dev = get_ocrdma_dev(qp->ibqp.device); @@ -2474,12 +2474,22 @@ static int ocrdma_set_av_params(struct ocrdma_qp *qp, cmd->params.vlan_dmac_b4_to_b5 = mac_addr[4] | (mac_addr[5] << 8); if (attr_mask & IB_QP_VID) { vlan_id = attrs->vlan_id; + } else if (dev->pfc_state) { + vlan_id = 0; + pr_err("ocrdma%d:Using VLAN with PFC is recommended\n", + dev->id); + pr_err("ocrdma%d:Using VLAN 0 for this connection\n", + dev->id); + } + + if (vlan_id < 0x1000) { cmd->params.vlan_dmac_b4_to_b5 |= vlan_id << OCRDMA_QP_PARAMS_VLAN_SHIFT; cmd->flags |= OCRDMA_QP_PARA_VLAN_EN_VALID; cmd->params.rnt_rc_sl_fl |= (dev->sl & 0x07) << OCRDMA_QP_PARAMS_SL_SHIFT; } + return 0; } From 038ab8b7432c0280f064a47173dc5b6412243674 Mon Sep 17 00:00:00 2001 From: Mitesh Ahuja Date: Tue, 19 May 2015 11:32:36 +0530 Subject: [PATCH 117/337] RDMA/ocrdma: Fix the request length for RDMA_QUERY_QP mailbox command to FW. Fix ocrdma_query_qp to pass correct mailbox request length to FW. Signed-off-by: Mitesh Ahuja Signed-off-by: Selvin Xavier Signed-off-by: Doug Ledford --- drivers/infiniband/hw/ocrdma/ocrdma_hw.c | 2 +- drivers/infiniband/hw/ocrdma/ocrdma_sli.h | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c index da688d78fc02..5636eb6f9307 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c @@ -2412,7 +2412,7 @@ int ocrdma_mbx_query_qp(struct ocrdma_dev *dev, struct ocrdma_qp *qp, struct ocrdma_query_qp *cmd; struct ocrdma_query_qp_rsp *rsp; - cmd = ocrdma_init_emb_mqe(OCRDMA_CMD_QUERY_QP, sizeof(*cmd)); + cmd = ocrdma_init_emb_mqe(OCRDMA_CMD_QUERY_QP, sizeof(*rsp)); if (!cmd) return status; cmd->qp_id = qp->id; diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_sli.h b/drivers/infiniband/hw/ocrdma/ocrdma_sli.h index baf9b8a0f278..02ad0aee99af 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_sli.h +++ b/drivers/infiniband/hw/ocrdma/ocrdma_sli.h @@ -1176,6 +1176,8 @@ struct ocrdma_query_qp_rsp { struct ocrdma_mqe_hdr hdr; struct ocrdma_mbx_rsp rsp; struct ocrdma_qp_params params; + u32 dpp_credits_cqid; + u32 rbq_id; }; enum { From 59582d86e23f30466413a04cc4db678b09f937ea Mon Sep 17 00:00:00 2001 From: Mitesh Ahuja Date: Tue, 19 May 2015 11:32:37 +0530 Subject: [PATCH 118/337] RDMA/ocrdma: Prevent allocation of DPP PDs if FW doesnt support it If DPP PDs are not supported by the FW, allocate only normal PDs. Signed-off-by: Mitesh Ahuja Signed-off-by: Padmanabh Ratnakar Signed-off-by: Selvin Xavier Signed-off-by: Doug Ledford --- drivers/infiniband/hw/ocrdma/ocrdma_hw.c | 51 ++++++++++----------- drivers/infiniband/hw/ocrdma/ocrdma_verbs.c | 2 +- 2 files changed, 26 insertions(+), 27 deletions(-) diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c index 5636eb6f9307..ac7347ad90be 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c @@ -1440,27 +1440,30 @@ static int ocrdma_mbx_alloc_pd_range(struct ocrdma_dev *dev) struct ocrdma_alloc_pd_range_rsp *rsp; /* Pre allocate the DPP PDs */ - cmd = ocrdma_init_emb_mqe(OCRDMA_CMD_ALLOC_PD_RANGE, sizeof(*cmd)); - if (!cmd) - return -ENOMEM; - cmd->pd_count = dev->attr.max_dpp_pds; - cmd->enable_dpp_rsvd |= OCRDMA_ALLOC_PD_ENABLE_DPP; - status = ocrdma_mbx_cmd(dev, (struct ocrdma_mqe *)cmd); - if (status) - goto mbx_err; - rsp = (struct ocrdma_alloc_pd_range_rsp *)cmd; + if (dev->attr.max_dpp_pds) { + cmd = ocrdma_init_emb_mqe(OCRDMA_CMD_ALLOC_PD_RANGE, + sizeof(*cmd)); + if (!cmd) + return -ENOMEM; + cmd->pd_count = dev->attr.max_dpp_pds; + cmd->enable_dpp_rsvd |= OCRDMA_ALLOC_PD_ENABLE_DPP; + status = ocrdma_mbx_cmd(dev, (struct ocrdma_mqe *)cmd); + rsp = (struct ocrdma_alloc_pd_range_rsp *)cmd; - if ((rsp->dpp_page_pdid & OCRDMA_ALLOC_PD_RSP_DPP) && rsp->pd_count) { - dev->pd_mgr->dpp_page_index = rsp->dpp_page_pdid >> - OCRDMA_ALLOC_PD_RSP_DPP_PAGE_SHIFT; - dev->pd_mgr->pd_dpp_start = rsp->dpp_page_pdid & - OCRDMA_ALLOC_PD_RNG_RSP_START_PDID_MASK; - dev->pd_mgr->max_dpp_pd = rsp->pd_count; - pd_bitmap_size = BITS_TO_LONGS(rsp->pd_count) * sizeof(long); - dev->pd_mgr->pd_dpp_bitmap = kzalloc(pd_bitmap_size, - GFP_KERNEL); + if (!status && (rsp->dpp_page_pdid & OCRDMA_ALLOC_PD_RSP_DPP) && + rsp->pd_count) { + dev->pd_mgr->dpp_page_index = rsp->dpp_page_pdid >> + OCRDMA_ALLOC_PD_RSP_DPP_PAGE_SHIFT; + dev->pd_mgr->pd_dpp_start = rsp->dpp_page_pdid & + OCRDMA_ALLOC_PD_RNG_RSP_START_PDID_MASK; + dev->pd_mgr->max_dpp_pd = rsp->pd_count; + pd_bitmap_size = + BITS_TO_LONGS(rsp->pd_count) * sizeof(long); + dev->pd_mgr->pd_dpp_bitmap = kzalloc(pd_bitmap_size, + GFP_KERNEL); + } + kfree(cmd); } - kfree(cmd); cmd = ocrdma_init_emb_mqe(OCRDMA_CMD_ALLOC_PD_RANGE, sizeof(*cmd)); if (!cmd) @@ -1468,10 +1471,8 @@ static int ocrdma_mbx_alloc_pd_range(struct ocrdma_dev *dev) cmd->pd_count = dev->attr.max_pd - dev->attr.max_dpp_pds; status = ocrdma_mbx_cmd(dev, (struct ocrdma_mqe *)cmd); - if (status) - goto mbx_err; rsp = (struct ocrdma_alloc_pd_range_rsp *)cmd; - if (rsp->pd_count) { + if (!status && rsp->pd_count) { dev->pd_mgr->pd_norm_start = rsp->dpp_page_pdid & OCRDMA_ALLOC_PD_RNG_RSP_START_PDID_MASK; dev->pd_mgr->max_normal_pd = rsp->pd_count; @@ -1479,15 +1480,13 @@ static int ocrdma_mbx_alloc_pd_range(struct ocrdma_dev *dev) dev->pd_mgr->pd_norm_bitmap = kzalloc(pd_bitmap_size, GFP_KERNEL); } + kfree(cmd); if (dev->pd_mgr->pd_norm_bitmap || dev->pd_mgr->pd_dpp_bitmap) { /* Enable PD resource manager */ dev->pd_mgr->pd_prealloc_valid = true; - } else { - return -ENOMEM; + return 0; } -mbx_err: - kfree(cmd); return status; } diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c index 06e8ab7825b9..9dcb66077d6c 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c @@ -365,7 +365,7 @@ static struct ocrdma_pd *_ocrdma_alloc_pd(struct ocrdma_dev *dev, if (!pd) return ERR_PTR(-ENOMEM); - if (udata && uctx) { + if (udata && uctx && dev->attr.max_dpp_pds) { pd->dpp_enabled = ocrdma_get_asic_type(dev) == OCRDMA_ASIC_GEN_SKH_R; pd->num_dpp_qp = From d27b2f15eb535b4f02a75070108c08cefb540257 Mon Sep 17 00:00:00 2001 From: Mitesh Ahuja Date: Tue, 19 May 2015 11:32:38 +0530 Subject: [PATCH 119/337] RDMA/ocrdma: Fix dmac resolution for link local address rdma_addr_find_dmac_by_grh fails to resolve dmac for link local address. Use rdma_get_ll_mac to resolve the link local address. Signed-off-by: Padmanabh Ratnakar Signed-off-by: Mitesh Ahuja Signed-off-by: Devesh Sharma Signed-off-by: Selvin Xavier Signed-off-by: Doug Ledford --- drivers/infiniband/hw/ocrdma/ocrdma.h | 2 ++ drivers/infiniband/hw/ocrdma/ocrdma_ah.c | 4 +++- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/ocrdma/ocrdma.h b/drivers/infiniband/hw/ocrdma/ocrdma.h index c9780d919769..ee9e3351a64c 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma.h +++ b/drivers/infiniband/hw/ocrdma/ocrdma.h @@ -515,6 +515,8 @@ static inline int ocrdma_resolve_dmac(struct ocrdma_dev *dev, memcpy(&in6, ah_attr->grh.dgid.raw, sizeof(in6)); if (rdma_is_multicast_addr(&in6)) rdma_get_mcast_mac(&in6, mac_addr); + else if (rdma_link_local_addr(&in6)) + rdma_get_ll_mac(&in6, mac_addr); else memcpy(mac_addr, ah_attr->dmac, ETH_ALEN); return 0; diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_ah.c b/drivers/infiniband/hw/ocrdma/ocrdma_ah.c index 2a5993b75651..f5a5ea836dbd 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_ah.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_ah.c @@ -127,7 +127,9 @@ struct ib_ah *ocrdma_create_ah(struct ib_pd *ibpd, struct ib_ah_attr *attr) goto av_conf_err; } - if (pd->uctx) { + if ((pd->uctx) && + (!rdma_is_multicast_addr((struct in6_addr *)attr->grh.dgid.raw)) && + (!rdma_link_local_addr((struct in6_addr *)attr->grh.dgid.raw))) { status = rdma_addr_find_dmac_by_grh(&sgid, &attr->grh.dgid, attr->dmac, &attr->vlan_id); if (status) { From 72d8a013d75fc845a34451bdce3d3a3dd97488f1 Mon Sep 17 00:00:00 2001 From: Naga Irrinki Date: Tue, 19 May 2015 11:32:39 +0530 Subject: [PATCH 120/337] RDMA/ocrdma: Fail connection for MTU lesser than 512 HW currently restricts the IB MTU range between 512 and 4096. Fail connection for MTUs lesser than 512. Signed-off-by: Naga Irrinki Signed-off-by: Selvin Xavier Signed-off-by: Doug Ledford --- drivers/infiniband/hw/ocrdma/ocrdma_hw.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c index ac7347ad90be..47615ff33bc6 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c @@ -2534,8 +2534,10 @@ static int ocrdma_set_qp_params(struct ocrdma_qp *qp, cmd->flags |= OCRDMA_QP_PARA_DST_QPN_VALID; } if (attr_mask & IB_QP_PATH_MTU) { - if (attrs->path_mtu < IB_MTU_256 || + if (attrs->path_mtu < IB_MTU_512 || attrs->path_mtu > IB_MTU_4096) { + pr_err("ocrdma%d: IB MTU %d is not supported\n", + dev->id, ib_mtu_enum_to_int(attrs->path_mtu)); status = -EINVAL; goto pmtu_err; } From 235dfcd47e4442b2d8766bed3ebaf655b36c7f1c Mon Sep 17 00:00:00 2001 From: Selvin Xavier Date: Tue, 19 May 2015 11:32:40 +0530 Subject: [PATCH 121/337] RDMA/ocrdma: Update ocrdma version number Updating the driver version to 10.6.0.0 Signed-off-by: Selvin Xavier Signed-off-by: Doug Ledford --- drivers/infiniband/hw/ocrdma/ocrdma.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/ocrdma/ocrdma.h b/drivers/infiniband/hw/ocrdma/ocrdma.h index ee9e3351a64c..b396344fae16 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma.h +++ b/drivers/infiniband/hw/ocrdma/ocrdma.h @@ -40,7 +40,7 @@ #include #include "ocrdma_sli.h" -#define OCRDMA_ROCE_DRV_VERSION "10.4.205.0u" +#define OCRDMA_ROCE_DRV_VERSION "10.6.0.0" #define OCRDMA_ROCE_DRV_DESC "Emulex OneConnect RoCE Driver" #define OCRDMA_NODE_DESC "Emulex OneConnect RoCE HCA" From 74856fbf441929918c49ff262ace9835048e4e6a Mon Sep 17 00:00:00 2001 From: Mark Hounschell Date: Wed, 13 May 2015 10:49:09 +0200 Subject: [PATCH 122/337] sd: Disable support for 256 byte/sector disks 256 bytes per sector support has been broken since 2.6.X, and no-one stepped up to fix this. So disable support for it. Signed-off-by: Mark Hounschell Signed-off-by: Hannes Reinecke Cc: stable@vger.kernel.org Signed-off-by: James Bottomley --- drivers/scsi/sd.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 79beebf53302..7f9d65fe4fd9 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1600,6 +1600,7 @@ static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd) { u64 start_lba = blk_rq_pos(scmd->request); u64 end_lba = blk_rq_pos(scmd->request) + (scsi_bufflen(scmd) / 512); + u64 factor = scmd->device->sector_size / 512; u64 bad_lba; int info_valid; /* @@ -1621,16 +1622,9 @@ static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd) if (scsi_bufflen(scmd) <= scmd->device->sector_size) return 0; - if (scmd->device->sector_size < 512) { - /* only legitimate sector_size here is 256 */ - start_lba <<= 1; - end_lba <<= 1; - } else { - /* be careful ... don't want any overflows */ - unsigned int factor = scmd->device->sector_size / 512; - do_div(start_lba, factor); - do_div(end_lba, factor); - } + /* be careful ... don't want any overflows */ + do_div(start_lba, factor); + do_div(end_lba, factor); /* The bad lba was reported incorrectly, we have no idea where * the error is. @@ -2188,8 +2182,7 @@ got_data: if (sector_size != 512 && sector_size != 1024 && sector_size != 2048 && - sector_size != 4096 && - sector_size != 256) { + sector_size != 4096) { sd_printk(KERN_NOTICE, sdkp, "Unsupported sector size %d.\n", sector_size); /* @@ -2244,8 +2237,6 @@ got_data: sdkp->capacity <<= 2; else if (sector_size == 1024) sdkp->capacity <<= 1; - else if (sector_size == 256) - sdkp->capacity >>= 1; blk_queue_physical_block_size(sdp->request_queue, sdkp->physical_block_size); From 4627de932d5528ede89ee3ea84ef6339a906e58d Mon Sep 17 00:00:00 2001 From: Minh Tran Date: Thu, 14 May 2015 23:16:17 -0700 Subject: [PATCH 123/337] MAINTAINERS, be2iscsi: change email domain be2iscsi change of ownership from Emulex to Avago Technologies recently. We like to get the following updates in: changed "Emulex" to "Avago Technologies", changed email addresses from "emulex.com" to "avagotech.com", updated MAINTAINER list for be2iscsi driver. Signed-off-by: Minh Tran Signed-off-by: Jayamohan Kallickal Signed-off-by: James Bottomley --- MAINTAINERS | 6 ++++-- drivers/scsi/be2iscsi/be.h | 6 +++--- drivers/scsi/be2iscsi/be_cmds.c | 6 +++--- drivers/scsi/be2iscsi/be_cmds.h | 6 +++--- drivers/scsi/be2iscsi/be_iscsi.c | 8 ++++---- drivers/scsi/be2iscsi/be_iscsi.h | 8 ++++---- drivers/scsi/be2iscsi/be_main.c | 12 ++++++------ drivers/scsi/be2iscsi/be_main.h | 10 +++++----- drivers/scsi/be2iscsi/be_mgmt.c | 8 ++++---- drivers/scsi/be2iscsi/be_mgmt.h | 8 ++++---- 10 files changed, 40 insertions(+), 38 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 2e5bbc0d68b2..2c6926d2776a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8794,9 +8794,11 @@ F: drivers/misc/phantom.c F: include/uapi/linux/phantom.h SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER -M: Jayamohan Kallickal +M: Jayamohan Kallickal +M: Minh Tran +M: John Soni Jose L: linux-scsi@vger.kernel.org -W: http://www.emulex.com +W: http://www.avagotech.com S: Supported F: drivers/scsi/be2iscsi/ diff --git a/drivers/scsi/be2iscsi/be.h b/drivers/scsi/be2iscsi/be.h index 81e83a65a193..32070099c333 100644 --- a/drivers/scsi/be2iscsi/be.h +++ b/drivers/scsi/be2iscsi/be.h @@ -1,5 +1,5 @@ /** - * Copyright (C) 2005 - 2014 Emulex + * Copyright (C) 2005 - 2015 Avago Technologies * All rights reserved. * * This program is free software; you can redistribute it and/or @@ -8,9 +8,9 @@ * Public License is included in this distribution in the file called COPYING. * * Contact Information: - * linux-drivers@emulex.com + * linux-drivers@avagotech.com * - * Emulex + * Avago Technologies * 3333 Susan Street * Costa Mesa, CA 92626 */ diff --git a/drivers/scsi/be2iscsi/be_cmds.c b/drivers/scsi/be2iscsi/be_cmds.c index 1028760b8a22..447cf7ce606e 100644 --- a/drivers/scsi/be2iscsi/be_cmds.c +++ b/drivers/scsi/be2iscsi/be_cmds.c @@ -1,5 +1,5 @@ /** - * Copyright (C) 2005 - 2014 Emulex + * Copyright (C) 2005 - 2015 Avago Technologies * All rights reserved. * * This program is free software; you can redistribute it and/or @@ -8,9 +8,9 @@ * Public License is included in this distribution in the file called COPYING. * * Contact Information: - * linux-drivers@emulex.com + * linux-drivers@avagotech.com * - * Emulex + * Avago Technologies * 3333 Susan Street * Costa Mesa, CA 92626 */ diff --git a/drivers/scsi/be2iscsi/be_cmds.h b/drivers/scsi/be2iscsi/be_cmds.h index 98897434bcb4..f11d325fe696 100644 --- a/drivers/scsi/be2iscsi/be_cmds.h +++ b/drivers/scsi/be2iscsi/be_cmds.h @@ -1,5 +1,5 @@ /** - * Copyright (C) 2005 - 2014 Emulex + * Copyright (C) 2005 - 2015 Avago Technologies * All rights reserved. * * This program is free software; you can redistribute it and/or @@ -8,9 +8,9 @@ * Public License is included in this distribution in the file called COPYING. * * Contact Information: - * linux-drivers@emulex.com + * linux-drivers@avagotech.com * - * Emulex + * Avago Technologies * 3333 Susan Street * Costa Mesa, CA 92626 */ diff --git a/drivers/scsi/be2iscsi/be_iscsi.c b/drivers/scsi/be2iscsi/be_iscsi.c index b7391a3f9f0b..2f0700796842 100644 --- a/drivers/scsi/be2iscsi/be_iscsi.c +++ b/drivers/scsi/be2iscsi/be_iscsi.c @@ -1,5 +1,5 @@ /** - * Copyright (C) 2005 - 2014 Emulex + * Copyright (C) 2005 - 2015 Avago Technologies * All rights reserved. * * This program is free software; you can redistribute it and/or @@ -7,12 +7,12 @@ * as published by the Free Software Foundation. The full GNU General * Public License is included in this distribution in the file called COPYING. * - * Written by: Jayamohan Kallickal (jayamohan.kallickal@emulex.com) + * Written by: Jayamohan Kallickal (jayamohan.kallickal@avagotech.com) * * Contact Information: - * linux-drivers@emulex.com + * linux-drivers@avagotech.com * - * Emulex + * Avago Technologies * 3333 Susan Street * Costa Mesa, CA 92626 */ diff --git a/drivers/scsi/be2iscsi/be_iscsi.h b/drivers/scsi/be2iscsi/be_iscsi.h index e0b3b2d1f27a..0c84e1c0763a 100644 --- a/drivers/scsi/be2iscsi/be_iscsi.h +++ b/drivers/scsi/be2iscsi/be_iscsi.h @@ -1,5 +1,5 @@ /** - * Copyright (C) 2005 - 2014 Emulex + * Copyright (C) 2005 - 2015 Avago Technologies * All rights reserved. * * This program is free software; you can redistribute it and/or @@ -7,12 +7,12 @@ * as published by the Free Software Foundation. The full GNU General * Public License is included in this distribution in the file called COPYING. * - * Written by: Jayamohan Kallickal (jayamohan.kallickal@emulex.com) + * Written by: Jayamohan Kallickal (jayamohan.kallickal@avagotech.com) * * Contact Information: - * linux-drivers@emulex.com + * linux-drivers@avagotech.com * - * Emulex + * Avago Technologies * 3333 Susan Street * Costa Mesa, CA 92626 */ diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c index 923a2b5a2439..1f74760ce86c 100644 --- a/drivers/scsi/be2iscsi/be_main.c +++ b/drivers/scsi/be2iscsi/be_main.c @@ -1,5 +1,5 @@ /** - * Copyright (C) 2005 - 2014 Emulex + * Copyright (C) 2005 - 2015 Avago Technologies * All rights reserved. * * This program is free software; you can redistribute it and/or @@ -7,12 +7,12 @@ * as published by the Free Software Foundation. The full GNU General * Public License is included in this distribution in the file called COPYING. * - * Written by: Jayamohan Kallickal (jayamohan.kallickal@emulex.com) + * Written by: Jayamohan Kallickal (jayamohan.kallickal@avagotech.com) * * Contact Information: - * linux-drivers@emulex.com + * linux-drivers@avagotech.com * - * Emulex + * Avago Technologies * 3333 Susan Street * Costa Mesa, CA 92626 */ @@ -50,7 +50,7 @@ static unsigned int enable_msix = 1; MODULE_DESCRIPTION(DRV_DESC " " BUILD_STR); MODULE_VERSION(BUILD_STR); -MODULE_AUTHOR("Emulex Corporation"); +MODULE_AUTHOR("Avago Technologies"); MODULE_LICENSE("GPL"); module_param(be_iopoll_budget, int, 0); module_param(enable_msix, int, 0); @@ -552,7 +552,7 @@ MODULE_DEVICE_TABLE(pci, beiscsi_pci_id_table); static struct scsi_host_template beiscsi_sht = { .module = THIS_MODULE, - .name = "Emulex 10Gbe open-iscsi Initiator Driver", + .name = "Avago Technologies 10Gbe open-iscsi Initiator Driver", .proc_name = DRV_NAME, .queuecommand = iscsi_queuecommand, .change_queue_depth = scsi_change_queue_depth, diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h index 7ee0ffc38514..e70ea26bbc2b 100644 --- a/drivers/scsi/be2iscsi/be_main.h +++ b/drivers/scsi/be2iscsi/be_main.h @@ -1,5 +1,5 @@ /** - * Copyright (C) 2005 - 2014 Emulex + * Copyright (C) 2005 - 2015 Avago Technologies * All rights reserved. * * This program is free software; you can redistribute it and/or @@ -7,12 +7,12 @@ * as published by the Free Software Foundation. The full GNU General * Public License is included in this distribution in the file called COPYING. * - * Written by: Jayamohan Kallickal (jayamohan.kallickal@emulex.com) + * Written by: Jayamohan Kallickal (jayamohan.kallickal@avagotech.com) * * Contact Information: - * linux-drivers@emulex.com + * linux-drivers@avagotech.com * - * Emulex + * Avago Technologies * 3333 Susan Street * Costa Mesa, CA 92626 */ @@ -37,7 +37,7 @@ #define DRV_NAME "be2iscsi" #define BUILD_STR "10.4.114.0" -#define BE_NAME "Emulex OneConnect" \ +#define BE_NAME "Avago Technologies OneConnect" \ "Open-iSCSI Driver version" BUILD_STR #define DRV_DESC BE_NAME " " "Driver" diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c index 681d4e8f003a..c2c4d6975fb7 100644 --- a/drivers/scsi/be2iscsi/be_mgmt.c +++ b/drivers/scsi/be2iscsi/be_mgmt.c @@ -1,5 +1,5 @@ /** - * Copyright (C) 2005 - 2014 Emulex + * Copyright (C) 2005 - 2015 Avago Technologies * All rights reserved. * * This program is free software; you can redistribute it and/or @@ -7,12 +7,12 @@ * as published by the Free Software Foundation. The full GNU General * Public License is included in this distribution in the file called COPYING. * - * Written by: Jayamohan Kallickal (jayamohan.kallickal@emulex.com) + * Written by: Jayamohan Kallickal (jayamohan.kallickal@avagotech.com) * * Contact Information: - * linux-drivers@emulex.com + * linux-drivers@avagotech.com * - * Emulex + * Avago Technologies * 3333 Susan Street * Costa Mesa, CA 92626 */ diff --git a/drivers/scsi/be2iscsi/be_mgmt.h b/drivers/scsi/be2iscsi/be_mgmt.h index bd81446936fc..9356b9a86b66 100644 --- a/drivers/scsi/be2iscsi/be_mgmt.h +++ b/drivers/scsi/be2iscsi/be_mgmt.h @@ -1,5 +1,5 @@ /** - * Copyright (C) 2005 - 2014 Emulex + * Copyright (C) 2005 - 2015 Avago Technologies * All rights reserved. * * This program is free software; you can redistribute it and/or @@ -7,12 +7,12 @@ * as published by the Free Software Foundation. The full GNU General * Public License is included in this distribution in the file called COPYING. * - * Written by: Jayamohan Kallickal (jayamohan.kallickal@emulex.com) + * Written by: Jayamohan Kallickal (jayamohan.kallickal@avagotech.com) * * Contact Information: - * linux-drivers@emulex.com + * linux-drivers@avagotech.com * - * Emulex + * Avago Technologies * 3333 Susan Street * Costa Mesa, CA 92626 */ From 32505876c0947a4cecc409dfbef1fc58ced6138d Mon Sep 17 00:00:00 2001 From: James Smart Date: Fri, 15 May 2015 13:10:58 -0400 Subject: [PATCH 124/337] MAINTAINERS: Revise lpfc maintainers for Avago Technologies ownership of Emulex The old email addresses will go away very soon. Revising with new addresses. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Signed-off-by: James Bottomley --- MAINTAINERS | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 2c6926d2776a..d42115a6de2b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3803,10 +3803,11 @@ M: David Woodhouse L: linux-embedded@vger.kernel.org S: Maintained -EMULEX LPFC FC SCSI DRIVER -M: James Smart +EMULEX/AVAGO LPFC FC/FCOE SCSI DRIVER +M: James Smart +M: Dick Kennedy L: linux-scsi@vger.kernel.org -W: http://sourceforge.net/projects/lpfcxxxx +W: http://www.avagotech.com S: Supported F: drivers/scsi/lpfc/ From 8d2812849acbc13c07bdad8a0a55a342ec1ce3a4 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 14 May 2015 18:07:44 +0100 Subject: [PATCH 125/337] ARM: 8357/1: perf: fix memory leak when probing PMU PPIs Commit 338d9dd3e2ae ("ARM: 8351/1: perf: don't warn about missing interrupt-affinity property for PPIs") added a check for PPIs so that we avoid parsing the interrupt-affinity property for these naturally affine interrupts. Unfortunately, this check can trigger an early (successful) return and we will leak the irqs array. This patch fixes the issue by reordering the code so that the check is performed before any independent allocation. Reported-by: David Binderman Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/perf_event_cpu.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c index 213919ba326f..3b8c2833c537 100644 --- a/arch/arm/kernel/perf_event_cpu.c +++ b/arch/arm/kernel/perf_event_cpu.c @@ -304,16 +304,17 @@ static int probe_current_pmu(struct arm_pmu *pmu) static int of_pmu_irq_cfg(struct platform_device *pdev) { int i, irq; - int *irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL); - - if (!irqs) - return -ENOMEM; + int *irqs; /* Don't bother with PPIs; they're already affine */ irq = platform_get_irq(pdev, 0); if (irq >= 0 && irq_is_percpu(irq)) return 0; + irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL); + if (!irqs) + return -ENOMEM; + for (i = 0; i < pdev->num_resources; ++i) { struct device_node *dn; int cpu; From 13c3ed6a92724d8c8cb148a14b0ae190ddfe7413 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 18 May 2015 13:51:24 -0400 Subject: [PATCH 126/337] vxlan: correct typo in call to unregister_netdevice_queue By inspection, this appears to be a typo. The gating comparison involves vxlan->dev rather than dev. In fact, dev is the iterator in the preceding loop above but it is actually constant in the 2nd loop. Use of dev seems to be a bad cut-n-paste from the prior call to unregister_netdevice_queue. Change dev to vxlan->dev, since that is what is actually being checked. Signed-off-by: John W. Linville Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 27a5f954f8e9..21a0fbf1ed94 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -2961,7 +2961,7 @@ static void __net_exit vxlan_exit_net(struct net *net) * to the list by the previous loop. */ if (!net_eq(dev_net(vxlan->dev), net)) - unregister_netdevice_queue(dev, &list); + unregister_netdevice_queue(vxlan->dev, &list); } unregister_netdevice_many(&list); From 10d784eae2b41e25d8fc6a88096cd27286093c84 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Fri, 8 May 2015 10:51:29 -0700 Subject: [PATCH 127/337] sched: always use blk_schedule_flush_plug in io_schedule_out block plug callback could sleep, so we introduce a parameter 'from_schedule' and corresponding drivers can use it to destinguish a schedule plug flush or a plug finish. Unfortunately io_schedule_out still uses blk_flush_plug(). This causes below output (Note, I added a might_sleep() in raid1_unplug to make it trigger faster, but the whole thing doesn't matter if I add might_sleep). In raid1/10, this can cause deadlock. This patch makes io_schedule_out always uses blk_schedule_flush_plug. This should only impact drivers (as far as I know, raid 1/10) which are sensitive to the 'from_schedule' parameter. [ 370.817949] ------------[ cut here ]------------ [ 370.817960] WARNING: CPU: 7 PID: 145 at ../kernel/sched/core.c:7306 __might_sleep+0x7f/0x90() [ 370.817969] do not call blocking ops when !TASK_RUNNING; state=2 set at [] prepare_to_wait+0x2f/0x90 [ 370.817971] Modules linked in: raid1 [ 370.817976] CPU: 7 PID: 145 Comm: kworker/u16:9 Tainted: G W 4.0.0+ #361 [ 370.817977] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140709_153802- 04/01/2014 [ 370.817983] Workqueue: writeback bdi_writeback_workfn (flush-9:1) [ 370.817985] ffffffff81cd83be ffff8800ba8cb298 ffffffff819dd7af 0000000000000001 [ 370.817988] ffff8800ba8cb2e8 ffff8800ba8cb2d8 ffffffff81051afc ffff8800ba8cb2c8 [ 370.817990] ffffffffa00061a8 000000000000041e 0000000000000000 ffff8800ba8cba28 [ 370.817993] Call Trace: [ 370.817999] [] dump_stack+0x4f/0x7b [ 370.818002] [] warn_slowpath_common+0x8c/0xd0 [ 370.818004] [] warn_slowpath_fmt+0x46/0x50 [ 370.818006] [] ? prepare_to_wait+0x2f/0x90 [ 370.818008] [] ? prepare_to_wait+0x2f/0x90 [ 370.818010] [] __might_sleep+0x7f/0x90 [ 370.818014] [] raid1_unplug+0xd3/0x170 [raid1] [ 370.818024] [] blk_flush_plug_list+0x8a/0x1e0 [ 370.818028] [] ? bit_wait+0x50/0x50 [ 370.818031] [] io_schedule_timeout+0x130/0x140 [ 370.818033] [] bit_wait_io+0x36/0x50 [ 370.818034] [] __wait_on_bit+0x65/0x90 [ 370.818041] [] ? ext4_read_block_bitmap_nowait+0xbc/0x630 [ 370.818043] [] ? bit_wait+0x50/0x50 [ 370.818045] [] out_of_line_wait_on_bit+0x72/0x80 [ 370.818047] [] ? autoremove_wake_function+0x40/0x40 [ 370.818050] [] __wait_on_buffer+0x44/0x50 [ 370.818053] [] ext4_wait_block_bitmap+0xe0/0xf0 [ 370.818058] [] ext4_mb_init_cache+0x206/0x790 [ 370.818062] [] ? lru_cache_add+0x1c/0x50 [ 370.818064] [] ext4_mb_init_group+0x11e/0x200 [ 370.818066] [] ext4_mb_load_buddy+0x341/0x360 [ 370.818068] [] ext4_mb_find_by_goal+0x93/0x2f0 [ 370.818070] [] ? ext4_mb_normalize_request+0x1e4/0x5b0 [ 370.818072] [] ext4_mb_regular_allocator+0x67/0x460 [ 370.818074] [] ? ext4_mb_normalize_request+0x1e4/0x5b0 [ 370.818076] [] ext4_mb_new_blocks+0x4cb/0x620 [ 370.818079] [] ext4_ext_map_blocks+0x4c6/0x14d0 [ 370.818081] [] ? ext4_es_lookup_extent+0x4e/0x290 [ 370.818085] [] ext4_map_blocks+0x14d/0x4f0 [ 370.818088] [] ext4_writepages+0x76d/0xe50 [ 370.818094] [] do_writepages+0x21/0x50 [ 370.818097] [] __writeback_single_inode+0x60/0x490 [ 370.818099] [] writeback_sb_inodes+0x2da/0x590 [ 370.818103] [] ? trylock_super+0x1b/0x50 [ 370.818105] [] ? trylock_super+0x1b/0x50 [ 370.818107] [] __writeback_inodes_wb+0x9f/0xd0 [ 370.818109] [] wb_writeback+0x34b/0x3c0 [ 370.818111] [] bdi_writeback_workfn+0x23f/0x550 [ 370.818116] [] process_one_work+0x1c8/0x570 [ 370.818117] [] ? process_one_work+0x14b/0x570 [ 370.818119] [] worker_thread+0x11b/0x470 [ 370.818121] [] ? process_one_work+0x570/0x570 [ 370.818124] [] kthread+0xf8/0x110 [ 370.818126] [] ? kthread_create_on_node+0x210/0x210 [ 370.818129] [] ret_from_fork+0x42/0x70 [ 370.818131] [] ? kthread_create_on_node+0x210/0x210 [ 370.818132] ---[ end trace 7b4deb71e68b6605 ]--- V2: don't change ->in_iowait Cc: NeilBrown Signed-off-by: Shaohua Li Reviewed-by: Jeff Moyer Signed-off-by: Jens Axboe --- kernel/sched/core.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index fe22f7510bce..cfeebb499e79 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -4387,10 +4387,7 @@ long __sched io_schedule_timeout(long timeout) long ret; current->in_iowait = 1; - if (old_iowait) - blk_schedule_flush_plug(current); - else - blk_flush_plug(current); + blk_schedule_flush_plug(current); delayacct_blkio_start(); rq = raw_rq(); From a94ef4ed710e0864c9720ff3f30ceb051aeb8377 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 27 Apr 2015 16:37:39 +0200 Subject: [PATCH 128/337] hwmon: Update the location of my quilt tree This new location was supposed to be temporary, but a couple years have elapsed and it's still there, so apparently it's there to stay. Signed-off-by: Jean Delvare Signed-off-by: Guenter Roeck --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index f8e0afb708b4..60d24f224271 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4536,7 +4536,7 @@ M: Jean Delvare M: Guenter Roeck L: lm-sensors@lm-sensors.org W: http://www.lm-sensors.org/ -T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/ +T: quilt http://jdelvare.nerim.net/devel/linux/jdelvare-hwmon/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git S: Maintained F: Documentation/hwmon/ From 54da691deb123c045259ebf4f5c67381244f58f1 Mon Sep 17 00:00:00 2001 From: Thomas Gummerer Date: Thu, 14 May 2015 09:16:39 +0200 Subject: [PATCH 129/337] drm/i915: fix screen flickering Commit c9f038a1a592 ("drm/i915: Don't assume primary & cursor are always on for wm calculation (v4)") fixes a null pointer dereference. Setting the primary and cursor panes to false in ilk_compute_wm_parameters to false does however give the following errors in the kernel log and causes the screen to flicker. [ 101.133716] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe A [ 101.133725] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun Always setting the panes to enabled fixes this error. Helped-by: Matt Roper Signed-off-by: Thomas Gummerer Reviewed-by: Matt Roper Tested-by: Mario Kleiner Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_pm.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index fa4ccb346389..555b896d2bda 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -2045,22 +2045,20 @@ static void ilk_compute_wm_parameters(struct drm_crtc *crtc, p->pipe_htotal = intel_crtc->config->base.adjusted_mode.crtc_htotal; p->pixel_rate = ilk_pipe_pixel_rate(dev, crtc); - if (crtc->primary->state->fb) { - p->pri.enabled = true; + if (crtc->primary->state->fb) p->pri.bytes_per_pixel = crtc->primary->state->fb->bits_per_pixel / 8; - } else { - p->pri.enabled = false; - p->pri.bytes_per_pixel = 0; - } + else + p->pri.bytes_per_pixel = 4; + + p->cur.bytes_per_pixel = 4; + /* + * TODO: for now, assume primary and cursor planes are always enabled. + * Setting them to false makes the screen flicker. + */ + p->pri.enabled = true; + p->cur.enabled = true; - if (crtc->cursor->state->fb) { - p->cur.enabled = true; - p->cur.bytes_per_pixel = 4; - } else { - p->cur.enabled = false; - p->cur.bytes_per_pixel = 0; - } p->pri.horiz_pixels = intel_crtc->config->pipe_src_w; p->cur.horiz_pixels = intel_crtc->base.cursor->state->crtc_w; From 13a988396cab68e6c6afd33e461a9e52ce23ff63 Mon Sep 17 00:00:00 2001 From: Koro Chen Date: Wed, 13 May 2015 22:39:03 +0800 Subject: [PATCH 130/337] ALSA: pcm: Modify double acknowledged interrupts check condition Currently in snd_pcm_update_hw_ptr0 during interrupt, we consider there were double acknowledged interrupts when: 1. HW reported pointer is smaller than expected, and 2. Time from last update time (hdelta) is over half a buffer time. However, when HW reported pointer is only a few bytes smaller than expected, and when hdelta is just a little larger than half a buffer time (e.g. ping-pong buffer), it wrongly treats this IRQ as double acknowledged. The condition #2 uses jiffies, but jiffies is not high resolution since it is integer. We should consider jiffies inaccuracy. Signed-off-by: Koro Chen Signed-off-by: Takashi Iwai --- sound/core/pcm_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index ac6b33f3779c..7d45645f10ba 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -339,7 +339,7 @@ static int snd_pcm_update_hw_ptr0(struct snd_pcm_substream *substream, if (delta > new_hw_ptr) { /* check for double acknowledged interrupts */ hdelta = curr_jiffies - runtime->hw_ptr_jiffies; - if (hdelta > runtime->hw_ptr_buffer_jiffies/2) { + if (hdelta > runtime->hw_ptr_buffer_jiffies/2 + 1) { hw_base += runtime->buffer_size; if (hw_base >= runtime->boundary) { hw_base = 0; From 7cded342c09f633666e71ee1ce048f218a9c5836 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 13 May 2015 14:33:22 +0200 Subject: [PATCH 131/337] s390/mm: correct return value of pmd_pfn Git commit 152125b7a882df36a55a8eadbea6d0edf1461ee7 "s390/mm: implement dirty bits for large segment table entries" broke the pmd_pfn function, it changed the return value from 'unsigned long' to 'int'. This breaks all machine configurations with memory above the 8TB line. Cc: stable@vger.kernel.org # 3.17+ Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/pgtable.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index fc642399b489..ef24a212eeb7 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -494,7 +494,7 @@ static inline int pmd_large(pmd_t pmd) return (pmd_val(pmd) & _SEGMENT_ENTRY_LARGE) != 0; } -static inline int pmd_pfn(pmd_t pmd) +static inline unsigned long pmd_pfn(pmd_t pmd) { unsigned long origin_mask; From 75e9143927a893aebad18b79e1bbeff4892c0d35 Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Wed, 13 May 2015 17:06:23 -0700 Subject: [PATCH 132/337] pinctrl: cygnus: fixed incorrect GPIO-pin mapping This patch fixes an incorrect GPIO-to-pin mapping in the Cygnus GPIO driver Signed-off-by: Ray Jui Signed-off-by: Linus Walleij --- drivers/pinctrl/bcm/pinctrl-cygnus-gpio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/pinctrl/bcm/pinctrl-cygnus-gpio.c b/drivers/pinctrl/bcm/pinctrl-cygnus-gpio.c index 4ad5c1a996e3..e406e3d8c1c7 100644 --- a/drivers/pinctrl/bcm/pinctrl-cygnus-gpio.c +++ b/drivers/pinctrl/bcm/pinctrl-cygnus-gpio.c @@ -643,7 +643,9 @@ static const struct cygnus_gpio_pin_range cygnus_gpio_pintable[] = { CYGNUS_PINRANGE(87, 104, 12), CYGNUS_PINRANGE(99, 102, 2), CYGNUS_PINRANGE(101, 90, 4), - CYGNUS_PINRANGE(105, 116, 10), + CYGNUS_PINRANGE(105, 116, 6), + CYGNUS_PINRANGE(111, 100, 2), + CYGNUS_PINRANGE(113, 122, 4), CYGNUS_PINRANGE(123, 11, 1), CYGNUS_PINRANGE(124, 38, 4), CYGNUS_PINRANGE(128, 43, 1), From fa94b0d72511add5822dc4124f2a3eae66b8863f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 19 May 2015 10:46:49 +0200 Subject: [PATCH 133/337] ALSA: usb-audio: Add quirk for MS LifeCam Studio Microsoft LifeCam Studio (045e:0772) needs a similar quirk for suppressing the wrong sample rate inquiry. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98481 Cc: Signed-off-by: Takashi Iwai --- sound/usb/quirks.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 7c5a70139278..46facfc9aec1 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1117,6 +1117,7 @@ bool snd_usb_get_sample_rate_quirk(struct snd_usb_audio *chip) switch (chip->usb_id) { case USB_ID(0x045E, 0x075D): /* MS Lifecam Cinema */ case USB_ID(0x045E, 0x076D): /* MS Lifecam HD-5000 */ + case USB_ID(0x045E, 0x0772): /* MS Lifecam Studio */ case USB_ID(0x04D8, 0xFEEA): /* Benchmark DAC1 Pre */ return true; } From 984cffdeaeb7ea5a21f49a89f638d84d62d08992 Mon Sep 17 00:00:00 2001 From: Carlo Caione Date: Sun, 17 May 2015 17:57:38 +0200 Subject: [PATCH 134/337] pinctrl: Fix gpio/pin mapping for Meson8b The num_pins field in the struct meson_domain_data must include also the missing pins in the Meson8b SoC, otherwise the GPIO <-> pin mapping is broken on this platform. Avoid also the dinamic allocation for GPIOs. Signed-off-by: Carlo Caione Signed-off-by: Linus Walleij --- drivers/pinctrl/meson/pinctrl-meson.c | 2 +- drivers/pinctrl/meson/pinctrl-meson8b.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c index edcd140e0899..a70a5fe79d44 100644 --- a/drivers/pinctrl/meson/pinctrl-meson.c +++ b/drivers/pinctrl/meson/pinctrl-meson.c @@ -569,7 +569,7 @@ static int meson_gpiolib_register(struct meson_pinctrl *pc) domain->chip.direction_output = meson_gpio_direction_output; domain->chip.get = meson_gpio_get; domain->chip.set = meson_gpio_set; - domain->chip.base = -1; + domain->chip.base = domain->data->pin_base; domain->chip.ngpio = domain->data->num_pins; domain->chip.can_sleep = false; domain->chip.of_node = domain->of_node; diff --git a/drivers/pinctrl/meson/pinctrl-meson8b.c b/drivers/pinctrl/meson/pinctrl-meson8b.c index 2f7ea6229880..9677807db364 100644 --- a/drivers/pinctrl/meson/pinctrl-meson8b.c +++ b/drivers/pinctrl/meson/pinctrl-meson8b.c @@ -876,13 +876,13 @@ static struct meson_domain_data meson8b_domain_data[] = { .banks = meson8b_banks, .num_banks = ARRAY_SIZE(meson8b_banks), .pin_base = 0, - .num_pins = 83, + .num_pins = 130, }, { .name = "ao-bank", .banks = meson8b_ao_banks, .num_banks = ARRAY_SIZE(meson8b_ao_banks), - .pin_base = 83, + .pin_base = 130, .num_pins = 16, }, }; From cc6f67bcafcb6bbbb2d1be1603dcd95125a52800 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 19 May 2015 14:30:12 +0200 Subject: [PATCH 135/337] ovl: mount read-only if workdir can't be created OpenWRT folks reported that overlayfs fails to mount if upper fs is full, because workdir can't be created. Wordir creation can fail for various other reasons too. There's no reason that the mount itself should fail, overlayfs can work fine without a workdir, as long as the overlay isn't modified. So mount it read-only and don't allow remounting read-write. Add a couple of WARN_ON()s for the impossible case of workdir being used despite being read-only. Reported-by: Bastian Bittorf Signed-off-by: Miklos Szeredi Cc: # v3.18+ --- fs/overlayfs/copy_up.c | 3 +++ fs/overlayfs/dir.c | 9 +++++++++ fs/overlayfs/super.c | 10 +++++----- 3 files changed, 17 insertions(+), 5 deletions(-) diff --git a/fs/overlayfs/copy_up.c b/fs/overlayfs/copy_up.c index 24f640441bd9..84d693d37428 100644 --- a/fs/overlayfs/copy_up.c +++ b/fs/overlayfs/copy_up.c @@ -299,6 +299,9 @@ int ovl_copy_up_one(struct dentry *parent, struct dentry *dentry, struct cred *override_cred; char *link = NULL; + if (WARN_ON(!workdir)) + return -EROFS; + ovl_path_upper(parent, &parentpath); upperdir = parentpath.dentry; diff --git a/fs/overlayfs/dir.c b/fs/overlayfs/dir.c index 2578a0c0677d..692ceda3bc21 100644 --- a/fs/overlayfs/dir.c +++ b/fs/overlayfs/dir.c @@ -222,6 +222,9 @@ static struct dentry *ovl_clear_empty(struct dentry *dentry, struct kstat stat; int err; + if (WARN_ON(!workdir)) + return ERR_PTR(-EROFS); + err = ovl_lock_rename_workdir(workdir, upperdir); if (err) goto out; @@ -322,6 +325,9 @@ static int ovl_create_over_whiteout(struct dentry *dentry, struct inode *inode, struct dentry *newdentry; int err; + if (WARN_ON(!workdir)) + return -EROFS; + err = ovl_lock_rename_workdir(workdir, upperdir); if (err) goto out; @@ -506,6 +512,9 @@ static int ovl_remove_and_whiteout(struct dentry *dentry, bool is_dir) struct dentry *opaquedir = NULL; int err; + if (WARN_ON(!workdir)) + return -EROFS; + if (is_dir) { if (OVL_TYPE_MERGE_OR_LOWER(ovl_path_type(dentry))) { opaquedir = ovl_check_empty_and_clear(dentry); diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c index 5f0d1993e6e3..bf8537c7f455 100644 --- a/fs/overlayfs/super.c +++ b/fs/overlayfs/super.c @@ -529,7 +529,7 @@ static int ovl_remount(struct super_block *sb, int *flags, char *data) { struct ovl_fs *ufs = sb->s_fs_info; - if (!(*flags & MS_RDONLY) && !ufs->upper_mnt) + if (!(*flags & MS_RDONLY) && (!ufs->upper_mnt || !ufs->workdir)) return -EROFS; return 0; @@ -925,9 +925,10 @@ static int ovl_fill_super(struct super_block *sb, void *data, int silent) ufs->workdir = ovl_workdir_create(ufs->upper_mnt, workpath.dentry); err = PTR_ERR(ufs->workdir); if (IS_ERR(ufs->workdir)) { - pr_err("overlayfs: failed to create directory %s/%s\n", - ufs->config.workdir, OVL_WORKDIR_NAME); - goto out_put_upper_mnt; + pr_warn("overlayfs: failed to create directory %s/%s (errno: %i); mounting read-only\n", + ufs->config.workdir, OVL_WORKDIR_NAME, -err); + sb->s_flags |= MS_RDONLY; + ufs->workdir = NULL; } } @@ -997,7 +998,6 @@ out_put_lower_mnt: kfree(ufs->lower_mnt); out_put_workdir: dput(ufs->workdir); -out_put_upper_mnt: mntput(ufs->upper_mnt); out_put_lowerpath: for (i = 0; i < numlower; i++) From 22d3a3c829fa9ecdb493d1f1f2838d543f8d86a3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 19 May 2015 15:40:21 +0200 Subject: [PATCH 136/337] mac80211: don't use napi_gro_receive() outside NAPI context No matter how the driver manages its NAPI context, there's no way sending frames to it from a timer can be correct, since it would corrupt the internal GRO lists. To avoid that, always use the non-NAPI path when releasing frames from the timer. Cc: stable@vger.kernel.org Reported-by: Jean Trivelly Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 3 +++ net/mac80211/rx.c | 5 +++-- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index ab46ab4a7249..cdc374296245 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -205,6 +205,8 @@ enum ieee80211_packet_rx_flags { * @IEEE80211_RX_CMNTR: received on cooked monitor already * @IEEE80211_RX_BEACON_REPORTED: This frame was already reported * to cfg80211_report_obss_beacon(). + * @IEEE80211_RX_REORDER_TIMER: this frame is released by the + * reorder buffer timeout timer, not the normal RX path * * These flags are used across handling multiple interfaces * for a single frame. @@ -212,6 +214,7 @@ enum ieee80211_packet_rx_flags { enum ieee80211_rx_flags { IEEE80211_RX_CMNTR = BIT(0), IEEE80211_RX_BEACON_REPORTED = BIT(1), + IEEE80211_RX_REORDER_TIMER = BIT(2), }; struct ieee80211_rx_data { diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 260eed45b6d2..5793f75c5ffd 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2121,7 +2121,8 @@ ieee80211_deliver_skb(struct ieee80211_rx_data *rx) /* deliver to local stack */ skb->protocol = eth_type_trans(skb, dev); memset(skb->cb, 0, sizeof(skb->cb)); - if (rx->local->napi) + if (!(rx->flags & IEEE80211_RX_REORDER_TIMER) && + rx->local->napi) napi_gro_receive(rx->local->napi, skb); else netif_receive_skb(skb); @@ -3231,7 +3232,7 @@ void ieee80211_release_reorder_timeout(struct sta_info *sta, int tid) /* This is OK -- must be QoS data frame */ .security_idx = tid, .seqno_idx = tid, - .flags = 0, + .flags = IEEE80211_RX_REORDER_TIMER, }; struct tid_ampdu_rx *tid_agg_rx; From d10ebb9f136669a1e9fa388fc450bf1822c93dd5 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Mon, 27 Apr 2015 23:10:13 +0200 Subject: [PATCH 137/337] drm/exynos: fb: use drm_format_num_planes to get buffer count The previous code had some special case handling for the buffer count in exynos_drm_format_num_buffers(). This code was incorrect though, since this special case doesn't exist for DRM. It stemmed from the existence of the special NV12M V4L2 format. NV12 is a bi-planar format (separate planes for luma and chroma) and V4L2 differentiates between a NV12 buffer where luma and chroma is contiguous in memory (so no data between luma/chroma), and a NV12 buffer where luma and chroma have two explicit memory locations (which is then called NV12M). This distinction doesn't exist for DRM. A bi-planar format always explicitly comes with the information about its two planes (even if these planes should be contiguous). Signed-off-by: Tobias Jakobi Acked-by: Joonyoung Shim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fb.c | 39 +------------------------- 1 file changed, 1 insertion(+), 38 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fb.c b/drivers/gpu/drm/exynos/exynos_drm_fb.c index 929cb03a8eab..142eb4e3f59e 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fb.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fb.c @@ -171,43 +171,6 @@ exynos_drm_framebuffer_init(struct drm_device *dev, return &exynos_fb->fb; } -static u32 exynos_drm_format_num_buffers(struct drm_mode_fb_cmd2 *mode_cmd) -{ - unsigned int cnt = 0; - - if (mode_cmd->pixel_format != DRM_FORMAT_NV12) - return drm_format_num_planes(mode_cmd->pixel_format); - - while (cnt != MAX_FB_BUFFER) { - if (!mode_cmd->handles[cnt]) - break; - cnt++; - } - - /* - * check if NV12 or NV12M. - * - * NV12 - * handles[0] = base1, offsets[0] = 0 - * handles[1] = base1, offsets[1] = Y_size - * - * NV12M - * handles[0] = base1, offsets[0] = 0 - * handles[1] = base2, offsets[1] = 0 - */ - if (cnt == 2) { - /* - * in case of NV12 format, offsets[1] is not 0 and - * handles[0] is same as handles[1]. - */ - if (mode_cmd->offsets[1] && - mode_cmd->handles[0] == mode_cmd->handles[1]) - cnt = 1; - } - - return cnt; -} - static struct drm_framebuffer * exynos_user_fb_create(struct drm_device *dev, struct drm_file *file_priv, struct drm_mode_fb_cmd2 *mode_cmd) @@ -230,7 +193,7 @@ exynos_user_fb_create(struct drm_device *dev, struct drm_file *file_priv, drm_helper_mode_fill_fb_struct(&exynos_fb->fb, mode_cmd); exynos_fb->exynos_gem_obj[0] = to_exynos_gem_obj(obj); - exynos_fb->buf_cnt = exynos_drm_format_num_buffers(mode_cmd); + exynos_fb->buf_cnt = drm_format_num_planes(mode_cmd->pixel_format); DRM_DEBUG_KMS("buf_cnt = %d\n", exynos_fb->buf_cnt); From 5d878bdb51bd7915ba3def8b531238c67624aa58 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Mon, 27 Apr 2015 23:10:14 +0200 Subject: [PATCH 138/337] drm/exynos: plane: honor buffer offset for dma_addr Previously we were ignoring the buffer offsets that are passed through the addfb2 ioctl. This didn't cause any major issues, since for uni-planar formats (like XRGB8888) userspace would most of the time just use offsets[0]=0. However with NV12 offsets[1] is very likely non-zero. So properly apply the offsets to our dma addresses. Signed-off-by: Tobias Jakobi Acked-by: Joonyoung Shim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_plane.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c b/drivers/gpu/drm/exynos/exynos_drm_plane.c index 13ea3349363b..b1180fbe7546 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c @@ -76,7 +76,7 @@ int exynos_check_plane(struct drm_plane *plane, struct drm_framebuffer *fb) return -EFAULT; } - exynos_plane->dma_addr[i] = buffer->dma_addr; + exynos_plane->dma_addr[i] = buffer->dma_addr + fb->offsets[i]; DRM_DEBUG_KMS("buffer: %d, dma_addr = 0x%lx\n", i, (unsigned long)exynos_plane->dma_addr[i]); From fac8a5b25f5b7954ba510727caadbd9f7839a958 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Mon, 27 Apr 2015 23:10:15 +0200 Subject: [PATCH 139/337] drm/exynos: mixer: remove buffer count handling in vp_video_buffer() The video processor (VP) supports four formats: NV12, NV21 and its tiled variants. All these formats are bi-planar, so the buffer count in vp_video_buffer() is always 2. Also properly exit if we're called with an invalid (non-VP) pixelformat. Signed-off-by: Tobias Jakobi Acked-by: Joonyoung Shim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_mixer.c | 17 ++--------------- 1 file changed, 2 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index fbec750574e6..1e8ce9ee039b 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -382,7 +382,6 @@ static void vp_video_buffer(struct mixer_context *ctx, int win) struct mixer_resources *res = &ctx->mixer_res; unsigned long flags; struct exynos_drm_plane *plane; - unsigned int buf_num = 1; dma_addr_t luma_addr[2], chroma_addr[2]; bool tiled_mode = false; bool crcb_mode = false; @@ -393,27 +392,15 @@ static void vp_video_buffer(struct mixer_context *ctx, int win) switch (plane->pixel_format) { case DRM_FORMAT_NV12: crcb_mode = false; - buf_num = 2; break; - /* TODO: single buffer format NV12, NV21 */ default: - /* ignore pixel format at disable time */ - if (!plane->dma_addr[0]) - break; - DRM_ERROR("pixel format for vp is wrong [%d].\n", plane->pixel_format); return; } - if (buf_num == 2) { - luma_addr[0] = plane->dma_addr[0]; - chroma_addr[0] = plane->dma_addr[1]; - } else { - luma_addr[0] = plane->dma_addr[0]; - chroma_addr[0] = plane->dma_addr[0] - + (plane->pitch * plane->fb_height); - } + luma_addr[0] = plane->dma_addr[0]; + chroma_addr[0] = plane->dma_addr[1]; if (plane->scan_flag & DRM_MODE_FLAG_INTERLACE) { ctx->interlace = true; From 8f2590f8e3a7aeeaf2ff5a875684fc6790ae58b5 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Mon, 27 Apr 2015 23:10:16 +0200 Subject: [PATCH 140/337] drm/exynos: mixer: also allow NV21 for the video processor All the necessary code is already there, just need to handle the format in the switch statement. Signed-off-by: Tobias Jakobi Acked-by: Joonyoung Shim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_mixer.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 1e8ce9ee039b..adb5ec1b51ae 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -393,6 +393,9 @@ static void vp_video_buffer(struct mixer_context *ctx, int win) case DRM_FORMAT_NV12: crcb_mode = false; break; + case DRM_FORMAT_NV21: + crcb_mode = true; + break; default: DRM_ERROR("pixel format for vp is wrong [%d].\n", plane->pixel_format); From 7a57ca7c89ad7e61f8ca45fa1fa892f0d5102808 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Mon, 27 Apr 2015 23:11:59 +0200 Subject: [PATCH 141/337] drm/exynos: mixer: cleanup pixelformat handling Move the defines for the pixelformats that the mixer supports out of mixer_graph_buffer() to the top of the source. Then select the mixer pixelformat (pf) in mixer_graph_buffer() based on the plane's pf (and not bpp). Also add handling of RGB565 and XRGB1555 to the switch statement and exit early if the plane has an unsupported pf. Partially based on 'drm/exynos: enable/disable blend based on pixel format' by Gustavo Padovan . v2: Use the shorter MXR_FORMAT as prefix. v3: Re-add ARGB8888 because of compatibility reasons (suggested by Joonyoung Shim). Reviewed-by: Gustavo Padovan Signed-off-by: Tobias Jakobi Acked-by: Joonyoung Shim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_mixer.c | 33 +++++++++++++++++++-------- 1 file changed, 23 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index adb5ec1b51ae..1bcbcfd5f8c3 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -44,6 +44,12 @@ #define MIXER_WIN_NR 3 #define MIXER_DEFAULT_WIN 0 +/* The pixelformats that are natively supported by the mixer. */ +#define MXR_FORMAT_RGB565 4 +#define MXR_FORMAT_ARGB1555 5 +#define MXR_FORMAT_ARGB4444 6 +#define MXR_FORMAT_ARGB8888 7 + struct mixer_resources { int irq; void __iomem *mixer_regs; @@ -521,20 +527,27 @@ static void mixer_graph_buffer(struct mixer_context *ctx, int win) plane = &ctx->planes[win]; - #define RGB565 4 - #define ARGB1555 5 - #define ARGB4444 6 - #define ARGB8888 7 + switch (plane->pixel_format) { + case DRM_FORMAT_XRGB4444: + fmt = MXR_FORMAT_ARGB4444; + break; - switch (plane->bpp) { - case 16: - fmt = ARGB4444; + case DRM_FORMAT_XRGB1555: + fmt = MXR_FORMAT_ARGB1555; break; - case 32: - fmt = ARGB8888; + + case DRM_FORMAT_RGB565: + fmt = MXR_FORMAT_RGB565; break; + + case DRM_FORMAT_XRGB8888: + case DRM_FORMAT_ARGB8888: + fmt = MXR_FORMAT_ARGB8888; + break; + default: - fmt = ARGB8888; + DRM_DEBUG_KMS("pixelformat unsupported by mixer\n"); + return; } /* check if mixer supports requested scaling setup */ From d6b163026c5a6f2e49bc59261b69d44465ebddb4 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sat, 2 May 2015 00:56:36 +0900 Subject: [PATCH 142/337] drm/exynos: mixer: Constify platform_device_id The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_mixer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 1bcbcfd5f8c3..1a07fdd3e39d 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -1159,7 +1159,7 @@ static struct mixer_drv_data exynos4210_mxr_drv_data = { .has_sclk = 1, }; -static struct platform_device_id mixer_driver_types[] = { +static const struct platform_device_id mixer_driver_types[] = { { .name = "s5p-mixer", .driver_data = (unsigned long)&exynos4210_mxr_drv_data, From 48107d7b0db180155b19b2cf083517014289a079 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 7 May 2015 09:04:44 +0900 Subject: [PATCH 143/337] drm/exynos: Fix build breakage on !DRM_EXYNOS_FIMD Disabling the CONFIG_DRM_EXYNOS_FIMD (e.g. by enabling of CONFIG_FB_S3C) leads to build error: drivers/built-in.o: In function `exynos_dp_dpms': binder.c:(.text+0xd6a840): undefined reference to `fimd_dp_clock_enable' binder.c:(.text+0xd6ab54): undefined reference to `fimd_dp_clock_enable' Fix this by changing direct call to fimd_dp_clock_enable() into optional call to exynos_drm_crtc_ops->clock_enable(). Only the DRM_EXYNOS_FIMD implements this op. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Javier Martinez Canillas Tested-by: Javier Martinez Canillas Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_dp_core.c | 11 +++++-- drivers/gpu/drm/exynos/exynos_drm_drv.h | 5 ++++ drivers/gpu/drm/exynos/exynos_drm_fimd.c | 37 ++++++++++++------------ drivers/gpu/drm/exynos/exynos_drm_fimd.h | 15 ---------- 4 files changed, 31 insertions(+), 37 deletions(-) delete mode 100644 drivers/gpu/drm/exynos/exynos_drm_fimd.h diff --git a/drivers/gpu/drm/exynos/exynos_dp_core.c b/drivers/gpu/drm/exynos/exynos_dp_core.c index 1dbfba58f909..441ef06b8894 100644 --- a/drivers/gpu/drm/exynos/exynos_dp_core.c +++ b/drivers/gpu/drm/exynos/exynos_dp_core.c @@ -32,7 +32,6 @@ #include #include "exynos_dp_core.h" -#include "exynos_drm_fimd.h" #define ctx_from_connector(c) container_of(c, struct exynos_dp_device, \ connector) @@ -1066,6 +1065,8 @@ static void exynos_dp_phy_exit(struct exynos_dp_device *dp) static void exynos_dp_poweron(struct exynos_dp_device *dp) { + struct exynos_drm_crtc *crtc = dp_to_crtc(dp); + if (dp->dpms_mode == DRM_MODE_DPMS_ON) return; @@ -1076,7 +1077,8 @@ static void exynos_dp_poweron(struct exynos_dp_device *dp) } } - fimd_dp_clock_enable(dp_to_crtc(dp), true); + if (crtc->ops->clock_enable) + crtc->ops->clock_enable(dp_to_crtc(dp), true); clk_prepare_enable(dp->clock); exynos_dp_phy_init(dp); @@ -1087,6 +1089,8 @@ static void exynos_dp_poweron(struct exynos_dp_device *dp) static void exynos_dp_poweroff(struct exynos_dp_device *dp) { + struct exynos_drm_crtc *crtc = dp_to_crtc(dp); + if (dp->dpms_mode != DRM_MODE_DPMS_ON) return; @@ -1102,7 +1106,8 @@ static void exynos_dp_poweroff(struct exynos_dp_device *dp) exynos_dp_phy_exit(dp); clk_disable_unprepare(dp->clock); - fimd_dp_clock_enable(dp_to_crtc(dp), false); + if (crtc->ops->clock_enable) + crtc->ops->clock_enable(dp_to_crtc(dp), false); if (dp->panel) { if (drm_panel_unprepare(dp->panel)) diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index e12ecb5d5d9a..44f128a03aea 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -181,6 +181,10 @@ struct exynos_drm_display { * @win_disable: disable hardware specific overlay. * @te_handler: trigger to transfer video image at the tearing effect * synchronization signal if there is a page flip request. + * @clock_enable: optional function enabling/disabling display domain clock, + * called from exynos-dp driver before powering up (with + * 'enable' argument as true) and after powering down (with + * 'enable' as false). */ struct exynos_drm_crtc; struct exynos_drm_crtc_ops { @@ -195,6 +199,7 @@ struct exynos_drm_crtc_ops { void (*win_commit)(struct exynos_drm_crtc *crtc, unsigned int zpos); void (*win_disable)(struct exynos_drm_crtc *crtc, unsigned int zpos); void (*te_handler)(struct exynos_drm_crtc *crtc); + void (*clock_enable)(struct exynos_drm_crtc *crtc, bool enable); }; /* diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 9819fa6a9e2a..2fb95ccb5841 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -33,7 +33,6 @@ #include "exynos_drm_crtc.h" #include "exynos_drm_plane.h" #include "exynos_drm_iommu.h" -#include "exynos_drm_fimd.h" /* * FIMD stands for Fully Interactive Mobile Display and @@ -946,6 +945,23 @@ static void fimd_te_handler(struct exynos_drm_crtc *crtc) drm_handle_vblank(ctx->drm_dev, ctx->pipe); } +static void fimd_dp_clock_enable(struct exynos_drm_crtc *crtc, bool enable) +{ + struct fimd_context *ctx = crtc->ctx; + u32 val; + + /* + * Only Exynos 5250, 5260, 5410 and 542x requires enabling DP/MIE + * clock. On these SoCs the bootloader may enable it but any + * power domain off/on will reset it to disable state. + */ + if (ctx->driver_data != &exynos5_fimd_driver_data) + return; + + val = enable ? DP_MIE_CLK_DP_ENABLE : DP_MIE_CLK_DISABLE; + writel(DP_MIE_CLK_DP_ENABLE, ctx->regs + DP_MIE_CLKCON); +} + static struct exynos_drm_crtc_ops fimd_crtc_ops = { .dpms = fimd_dpms, .mode_fixup = fimd_mode_fixup, @@ -956,6 +972,7 @@ static struct exynos_drm_crtc_ops fimd_crtc_ops = { .win_commit = fimd_win_commit, .win_disable = fimd_win_disable, .te_handler = fimd_te_handler, + .clock_enable = fimd_dp_clock_enable, }; static irqreturn_t fimd_irq_handler(int irq, void *dev_id) @@ -1192,24 +1209,6 @@ static int fimd_remove(struct platform_device *pdev) return 0; } -void fimd_dp_clock_enable(struct exynos_drm_crtc *crtc, bool enable) -{ - struct fimd_context *ctx = crtc->ctx; - u32 val; - - /* - * Only Exynos 5250, 5260, 5410 and 542x requires enabling DP/MIE - * clock. On these SoCs the bootloader may enable it but any - * power domain off/on will reset it to disable state. - */ - if (ctx->driver_data != &exynos5_fimd_driver_data) - return; - - val = enable ? DP_MIE_CLK_DP_ENABLE : DP_MIE_CLK_DISABLE; - writel(DP_MIE_CLK_DP_ENABLE, ctx->regs + DP_MIE_CLKCON); -} -EXPORT_SYMBOL_GPL(fimd_dp_clock_enable); - struct platform_driver fimd_driver = { .probe = fimd_probe, .remove = fimd_remove, diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.h b/drivers/gpu/drm/exynos/exynos_drm_fimd.h deleted file mode 100644 index b4fcaa568456..000000000000 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright (c) 2015 Samsung Electronics Co., Ltd. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef _EXYNOS_DRM_FIMD_H_ -#define _EXYNOS_DRM_FIMD_H_ - -extern void fimd_dp_clock_enable(struct exynos_drm_crtc *crtc, bool enable); - -#endif /* _EXYNOS_DRM_FIMD_H_ */ From f3aaf7624463721af27f13cc083916c54ffbee70 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 7 May 2015 09:04:45 +0900 Subject: [PATCH 144/337] drm/exynos: Constify exynos_drm_crtc_ops The Exynos DRM code does not modify the ops provided by CRTC driver in exynos_drm_crtc_create() call. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Javier Martinez Canillas Tested-by: Javier Martinez Canillas Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos7_drm_decon.c | 2 +- drivers/gpu/drm/exynos/exynos_drm_crtc.c | 10 +++++----- drivers/gpu/drm/exynos/exynos_drm_crtc.h | 10 +++++----- drivers/gpu/drm/exynos/exynos_drm_drv.h | 2 +- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 2 +- drivers/gpu/drm/exynos/exynos_drm_vidi.c | 2 +- drivers/gpu/drm/exynos/exynos_mixer.c | 2 +- 7 files changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos7_drm_decon.c b/drivers/gpu/drm/exynos/exynos7_drm_decon.c index 1f7e33f59de6..3d00df76220d 100644 --- a/drivers/gpu/drm/exynos/exynos7_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos7_drm_decon.c @@ -710,7 +710,7 @@ static void decon_dpms(struct exynos_drm_crtc *crtc, int mode) } } -static struct exynos_drm_crtc_ops decon_crtc_ops = { +static const struct exynos_drm_crtc_ops decon_crtc_ops = { .dpms = decon_dpms, .mode_fixup = decon_mode_fixup, .commit = decon_commit, diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index eb49195cec5c..9006b947e03c 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -238,11 +238,11 @@ static struct drm_crtc_funcs exynos_crtc_funcs = { }; struct exynos_drm_crtc *exynos_drm_crtc_create(struct drm_device *drm_dev, - struct drm_plane *plane, - int pipe, - enum exynos_drm_output_type type, - struct exynos_drm_crtc_ops *ops, - void *ctx) + struct drm_plane *plane, + int pipe, + enum exynos_drm_output_type type, + const struct exynos_drm_crtc_ops *ops, + void *ctx) { struct exynos_drm_crtc *exynos_crtc; struct exynos_drm_private *private = drm_dev->dev_private; diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.h b/drivers/gpu/drm/exynos/exynos_drm_crtc.h index 0ecd8fc45cff..0f3aa70818e3 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.h +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.h @@ -18,11 +18,11 @@ #include "exynos_drm_drv.h" struct exynos_drm_crtc *exynos_drm_crtc_create(struct drm_device *drm_dev, - struct drm_plane *plane, - int pipe, - enum exynos_drm_output_type type, - struct exynos_drm_crtc_ops *ops, - void *context); + struct drm_plane *plane, + int pipe, + enum exynos_drm_output_type type, + const struct exynos_drm_crtc_ops *ops, + void *context); int exynos_drm_crtc_enable_vblank(struct drm_device *dev, int pipe); void exynos_drm_crtc_disable_vblank(struct drm_device *dev, int pipe); void exynos_drm_crtc_finish_pageflip(struct drm_device *dev, int pipe); diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index 44f128a03aea..0e951226ca06 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -226,7 +226,7 @@ struct exynos_drm_crtc { unsigned int dpms; wait_queue_head_t pending_flip_queue; struct drm_pending_vblank_event *event; - struct exynos_drm_crtc_ops *ops; + const struct exynos_drm_crtc_ops *ops; void *ctx; }; diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 2fb95ccb5841..5c1a148525f8 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -962,7 +962,7 @@ static void fimd_dp_clock_enable(struct exynos_drm_crtc *crtc, bool enable) writel(DP_MIE_CLK_DP_ENABLE, ctx->regs + DP_MIE_CLKCON); } -static struct exynos_drm_crtc_ops fimd_crtc_ops = { +static const struct exynos_drm_crtc_ops fimd_crtc_ops = { .dpms = fimd_dpms, .mode_fixup = fimd_mode_fixup, .commit = fimd_commit, diff --git a/drivers/gpu/drm/exynos/exynos_drm_vidi.c b/drivers/gpu/drm/exynos/exynos_drm_vidi.c index 27e84ec21694..1b3479a8db5f 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_vidi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_vidi.c @@ -217,7 +217,7 @@ static int vidi_ctx_initialize(struct vidi_context *ctx, return 0; } -static struct exynos_drm_crtc_ops vidi_crtc_ops = { +static const struct exynos_drm_crtc_ops vidi_crtc_ops = { .dpms = vidi_dpms, .enable_vblank = vidi_enable_vblank, .disable_vblank = vidi_disable_vblank, diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 1a07fdd3e39d..31c1793bc97b 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -1129,7 +1129,7 @@ int mixer_check_mode(struct drm_display_mode *mode) return -EINVAL; } -static struct exynos_drm_crtc_ops mixer_crtc_ops = { +static const struct exynos_drm_crtc_ops mixer_crtc_ops = { .dpms = mixer_dpms, .enable_vblank = mixer_enable_vblank, .disable_vblank = mixer_disable_vblank, From 362edccc7a1395bcd05d1f2b30f47a3439ffef5c Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 7 May 2015 09:04:46 +0900 Subject: [PATCH 145/337] drm/exynos: Consolidate return statements in fimd_bind() Simplify the code and remove superfluous return statement. Just return the result of fimd_iommu_attach_devices(). Signed-off-by: Krzysztof Kozlowski Reviewed-by: Javier Martinez Canillas Tested-by: Javier Martinez Canillas Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 5c1a148525f8..d704f2ba7179 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -1042,12 +1042,7 @@ static int fimd_bind(struct device *dev, struct device *master, void *data) if (ctx->display) exynos_drm_create_enc_conn(drm_dev, ctx->display); - ret = fimd_iommu_attach_devices(ctx, drm_dev); - if (ret) - return ret; - - return 0; - + return fimd_iommu_attach_devices(ctx, drm_dev); } static void fimd_unbind(struct device *dev, struct device *master, From c0734fbaf49512dc62d544875bd9a4192329ce01 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Wed, 6 May 2015 14:10:21 +0200 Subject: [PATCH 146/337] drm/exynos: mixer: don't dump registers under spinlock mixer_regs_dump() was called in mixer_run(), which was called under the register spinlock in mixer_graph_buffer() and vp_video_buffer(). This would trigger a sysmmu pagefault with drm.debug=0xff because of the large delay caused by the register dumping. To keep consistency also move register dumping out of mixer_stop(), which is the counterpart to mixer_run(). Kernel dump: [ 131.296529] [drm:mixer_win_commit] win: 2 [ 131.300693] [drm:mixer_regs_dump] MXR_STATUS = 00000081 [ 131.305888] [drm:mixer_regs_dump] MXR_CFG = 000007d5 [ 131.310835] [drm:mixer_regs_dump] MXR_INT_EN = 00000000 [ 131.316043] [drm:mixer_regs_dump] MXR_INT_STATUS = 00000900 [ 131.321598] [drm:mixer_regs_dump] MXR_LAYER_CFG = 00000321 [ 131.327066] [drm:mixer_regs_dump] MXR_VIDEO_CFG = 00000000 [ 131.332535] [drm:mixer_regs_dump] MXR_GRAPHIC0_CFG = 00310700 [ 131.338263] [drm:mixer_regs_dump] MXR_GRAPHIC0_BASE = 20c00000 [ 131.344079] [drm:mixer_regs_dump] MXR_GRAPHIC0_SPAN = 00000780 [ 131.349895] [drm:mixer_regs_dump] MXR_GRAPHIC0_WH = 07800438 [ 131.355537] [drm:mixer_regs_dump] MXR_GRAPHIC0_SXY = 00000000 [ 131.361265] [drm:mixer_regs_dump] MXR_GRAPHIC0_DXY = 00000000 [ 131.366994] [drm:mixer_regs_dump] MXR_GRAPHIC1_CFG = 00000000 [ 131.372723] [drm:mixer_regs_dump] MXR_GRAPHIC1_BASE = 00000000 [ 131.378539] [drm:mixer_regs_dump] MXR_GRAPHIC1_SPAN = 00000000 [ 131.384354] [drm:mixer_regs_dump] MXR_GRAPHIC1_WH = 00000000 [ 131.389996] [drm:mixer_regs_dump] MXR_GRAPHIC1_SXY = 00000000 [ 131.395725] [drm:mixer_regs_dump] MXR_GRAPHIC1_DXY = 00000000 [ 131.401486] PAGE FAULT occurred at 0x0 by 12e20000.sysmmu(Page table base: 0x6d990000) [ 131.409353] Lv1 entry: 0x6e0f2401 [ 131.412753] ------------[ cut here ]------------ [ 131.417339] kernel BUG at drivers/iommu/exynos-iommu.c:358! [ 131.422894] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 131.428709] Modules linked in: ecb bridge stp llc bnep btrfs xor xor_neon zlib_inflate zlib_deflate raid6_pq btusb bluetooth usb_storage s5p_jpeg videobuf2_dma_contig videobuf2_memops v4l2_mem2mem videobuf2_core [ 131.447461] CPU: 0 PID: 2418 Comm: lt-modetest Tainted: G W 4.0.1-debug+ #3 [ 131.455530] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 131.461607] task: ee194100 ti: ec4fe000 task.ti: ec4fe000 [ 131.466995] PC is at exynos_sysmmu_irq+0x2a0/0x2a8 [ 131.471766] LR is at vprintk_emit+0x268/0x594 [ 131.476103] pc : [] lr : [] psr: a00001d3 [ 131.476103] sp : ec4ff9d8 ip : 00000000 fp : ec4ffa14 [ 131.487559] r10: ffffffda r9 : ee206e28 r8 : ee2d1a10 [ 131.492767] r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : ee206e10 [ 131.499277] r3 : c06fca20 r2 : 00000000 r1 : 00000000 r0 : ee28be00 [ 131.505788] Flags: NzCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment user [ 131.513079] Control: 10c5387d Table: 6c72404a DAC: 00000015 [ 131.518808] Process lt-modetest (pid: 2418, stack limit = 0xec4fe218) [ 131.525231] Stack: (0xec4ff9d8 to 0xec500000) [ 131.529571] f9c0: ec4ff9e4 c03a0c40 [ 131.537732] f9e0: bbfa6e35 6d990000 6d161c3d ee20a900 ee04a7e0 00000028 ee007000 00000000 [ 131.545891] fa00: 00000000 c06fb1fc ec4ffa5c ec4ffa18 c0066a34 c0277f10 ee257664 0000000b [ 131.554050] fa20: ec4ffa5c c06fafbb ee04a780 c06fb1e8 00000000 ee04a780 ee04a7e0 ee20a900 [ 131.562209] fa40: ee007000 00000015 ec4ffb48 ee008000 ec4ffa7c ec4ffa60 c0066c90 c00669e0 [ 131.570369] fa60: 00020000 ee04a780 ee04a7e0 00001000 ec4ffa94 ec4ffa80 c0069c6c c0066c58 [ 131.578528] fa80: 00000028 ee004450 ec4ffaac ec4ffa98 c0066028 c0069bac 000000a0 c06e19b4 [ 131.586687] faa0: ec4ffad4 ec4ffab0 c0223678 c0066000 c02235dc 00000015 00000000 00000015 [ 131.594846] fac0: ec4ffc80 00000001 ec4ffaec ec4ffad8 c0066028 c02235e8 00000089 c06bfc54 [ 131.603005] fae0: ec4ffb1c ec4ffaf0 c006633c c0066000 ec4ffb48 f002000c 00000025 00000015 [ 131.611165] fb00: c06c680c ec4ffb48 f0020000 ee008000 ec4ffb44 ec4ffb20 c000867c c00662c4 [ 131.619324] fb20: c02046ac 60000153 ffffffff ec4ffb7c 00000000 00000101 ec4ffbb4 ec4ffb48 [ 131.627483] fb40: c0013240 c0008650 00000001 ee257508 00000002 00000001 ee257504 ee257508 [ 131.635642] fb60: 00000000 c06bf27c 00000000 00000101 ee008000 ec4ffbb4 00000000 ec4ffb90 [ 131.643802] fb80: c002e124 c02046ac 60000153 ffffffff c002e09c 00000000 c06c6080 00000283 [ 131.651960] fba0: 00000001 c06fb1ac ec4ffc0c ec4ffbb8 c002d690 c002e0a8 ee78d080 ee008000 [ 131.660120] fbc0: 00400000 c04eb3b0 ffff7c44 c06c6100 c06fdac0 0000000a c06bf2f0 c06c6080 [ 131.668279] fbe0: c06bfc54 c06bfc54 00000000 00000025 00000000 00000001 ec4ffc80 ee008000 [ 131.676438] fc00: ec4ffc24 ec4ffc10 c002dbb8 c002d564 00000089 c06bfc54 ec4ffc54 ec4ffc28 [ 131.684597] fc20: c0066340 c002dafc ec4ffc80 f002000c 0000001c 0000000c c06c680c ec4ffc80 [ 131.692757] fc40: f0020000 00000080 ec4ffc7c ec4ffc58 c000867c c00662c4 c04e6624 60000053 [ 131.700916] fc60: ffffffff ec4ffcb4 c072df54 ee22d010 ec4ffcdc ec4ffc80 c0013240 c0008650 [ 131.709075] fc80: ee22d664 ee194100 00000000 ec4fe000 60000053 00000400 00000002 ee22d420 [ 131.717234] fca0: c072df54 ee22d010 00000080 ec4ffcdc ec4ffcc8 ec4ffcc8 c04e6620 c04e6624 [ 131.725393] fcc0: 60000053 ffffffff ec4fe000 c072df54 ec4ffd34 ec4ffce0 c02b64d0 c04e6618 [ 131.733552] fce0: ec4ffcf8 00000000 00000000 60000053 00010000 00010000 00000000 200cb000 [ 131.741712] fd00: 20080000 ee22d664 00000001 ee256000 ee261400 ee22d420 00000080 00000080 [ 131.749871] fd20: ee256000 00000280 ec4ffd74 ec4ffd38 c02a8844 c02b5fec 00000080 00000280 [ 131.758030] fd40: 000001e0 00000000 00000000 00000280 000001e0 ee22d220 01e00000 00000002 [ 131.766189] fd60: ee22d420 ee261400 ec4ffdbc ec4ffd78 c0293cbc c02a87a4 00000080 00000280 [ 131.774348] fd80: 000001e0 00000000 00000000 02800000 01e00000 ee261400 ee22d460 ee261400 [ 131.782508] fda0: ee22d420 00000000 01e00000 000001e0 ec4ffe24 ec4ffdc0 c0297800 c0293b24 [ 131.790667] fdc0: 00000080 00000280 000001e0 00000000 00000000 02800000 01e00000 ec4ffdf8 [ 131.798826] fde0: c028db00 00000080 00000080 ee256000 02800000 00000000 ec4ffe24 c06c6448 [ 131.806985] fe00: c072df54 000000b7 ee013800 ec4ffe54 edbf7300 ec4ffe54 ec4fff04 ec4ffe28 [ 131.815145] fe20: c028a848 c029768c 00000001 c06195d8 ec4ffe5c ec4ffe40 c0297680 c0521f6c [ 131.823304] fe40: 00000030 bed45d38 00000030 c03064b7 ec4ffe8c 00000011 00000015 00000022 [ 131.831463] fe60: 00000000 00000080 00000080 00000280 000001e0 00000000 00000000 01e00000 [ 131.839622] fe80: 02800000 00000000 00000000 0004b000 00000000 00000000 c00121e4 c0011080 [ 131.847781] fea0: c00110a4 00000000 00000000 00000000 ec4ffeec ec4ffec0 c00110f0 c00121cc [ 131.855940] fec0: 00000000 c00e7fec ec4ffeec ec4ffed8 c004af2c dc8ba201 edae4fc0 edbf7000 [ 131.864100] fee0: edbf7000 00000003 bed45d38 00000003 bed45d38 ee3f2040 ec4fff7c ec4fff08 [ 131.872259] ff00: c010b62c c028a684 edae4fc0 00000000 00000000 b6666000 ec40d108 edae4fc4 [ 131.880418] ff20: ec4fff6c ec4fff30 c00e7fec c02207b0 000001f9 00000000 edae5008 ec40d110 [ 131.888577] ff40: 00070800 edae5008 edae4fc0 00070800 b6666000 edbf7000 edbf7000 c03064b7 [ 131.896736] ff60: bed45d38 00000003 ec4fe000 00000000 ec4fffa4 ec4fff80 c010b84c c010b208 [ 131.904896] ff80: 00000022 00000000 bed45d38 c03064b7 00000036 c000ede4 00000000 ec4fffa8 [ 131.913055] ffa0: c000ec40 c010b81c 00000000 bed45d38 00000003 c03064b7 bed45d38 00000022 [ 131.921214] ffc0: 00000000 bed45d38 c03064b7 00000036 00000080 00000080 00000000 000001e0 [ 131.929373] ffe0: b6da4064 bed45d1c b6d98968 b6e8082c 60000050 00000003 00000000 00000000 [ 131.937529] Backtrace: [ 131.939967] [] (exynos_sysmmu_irq) from [] (handle_irq_event_percpu+0x60/0x278) [ 131.948988] r10:c06fb1fc r9:00000000 r8:00000000 r7:ee007000 r6:00000028 r5:ee04a7e0 [ 131.956799] r4:ee20a900 [ 131.959320] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x44/0x64) [ 131.968170] r10:ee008000 r9:ec4ffb48 r8:00000015 r7:ee007000 r6:ee20a900 r5:ee04a7e0 [ 131.975982] r4:ee04a780 [ 131.978504] [] (handle_irq_event) from [] (handle_level_irq+0xcc/0x144) [ 131.986832] r6:00001000 r5:ee04a7e0 r4:ee04a780 r3:00020000 [ 131.992478] [] (handle_level_irq) from [] (generic_handle_irq+0x34/0x44) [ 132.000894] r5:ee004450 r4:00000028 [ 132.004459] [] (generic_handle_irq) from [] (combiner_handle_cascade_irq+0x9c/0x108) [ 132.013914] r4:c06e19b4 r3:000000a0 [ 132.017476] [] (combiner_handle_cascade_irq) from [] (generic_handle_irq+0x34/0x44) [ 132.026847] r8:00000001 r7:ec4ffc80 r6:00000015 r5:00000000 r4:00000015 r3:c02235dc [ 132.034576] [] (generic_handle_irq) from [] (__handle_domain_irq+0x84/0xf0) [ 132.043252] r4:c06bfc54 r3:00000089 [ 132.046815] [] (__handle_domain_irq) from [] (gic_handle_irq+0x38/0x70) [ 132.055144] r10:ee008000 r9:f0020000 r8:ec4ffb48 r7:c06c680c r6:00000015 r5:00000025 [ 132.062956] r4:f002000c r3:ec4ffb48 [ 132.066520] [] (gic_handle_irq) from [] (__irq_svc+0x40/0x74) [ 132.073980] Exception stack(0xec4ffb48 to 0xec4ffb90) [ 132.079016] fb40: 00000001 ee257508 00000002 00000001 ee257504 ee257508 [ 132.087176] fb60: 00000000 c06bf27c 00000000 00000101 ee008000 ec4ffbb4 00000000 ec4ffb90 [ 132.095333] fb80: c002e124 c02046ac 60000153 ffffffff [ 132.100367] r9:00000101 r8:00000000 r7:ec4ffb7c r6:ffffffff r5:60000153 r4:c02046ac [ 132.108098] [] (tasklet_hi_action) from [] (__do_softirq+0x138/0x38c) [ 132.116251] r8:c06fb1ac r7:00000001 r6:00000283 r5:c06c6080 r4:00000000 r3:c002e09c [ 132.123980] [] (__do_softirq) from [] (irq_exit+0xc8/0x104) [ 132.131268] r10:ee008000 r9:ec4ffc80 r8:00000001 r7:00000000 r6:00000025 r5:00000000 [ 132.139080] r4:c06bfc54 [ 132.141600] [] (irq_exit) from [] (__handle_domain_irq+0x88/0xf0) [ 132.149409] r4:c06bfc54 r3:00000089 [ 132.152971] [] (__handle_domain_irq) from [] (gic_handle_irq+0x38/0x70) [ 132.161300] r10:00000080 r9:f0020000 r8:ec4ffc80 r7:c06c680c r6:0000000c r5:0000001c [ 132.169112] r4:f002000c r3:ec4ffc80 [ 132.172675] [] (gic_handle_irq) from [] (__irq_svc+0x40/0x74) [ 132.180137] Exception stack(0xec4ffc80 to 0xec4ffcc8) [ 132.185173] fc80: ee22d664 ee194100 00000000 ec4fe000 60000053 00000400 00000002 ee22d420 [ 132.193332] fca0: c072df54 ee22d010 00000080 ec4ffcdc ec4ffcc8 ec4ffcc8 c04e6620 c04e6624 [ 132.201489] fcc0: 60000053 ffffffff [ 132.204961] r9:ee22d010 r8:c072df54 r7:ec4ffcb4 r6:ffffffff r5:60000053 r4:c04e6624 [ 132.212694] [] (_raw_spin_unlock_irqrestore) from [] (mixer_win_commit+0x4f0/0xcc8) [ 132.222060] r4:c072df54 r3:ec4fe000 [ 132.225625] [] (mixer_win_commit) from [] (exynos_update_plane+0xac/0xb8) [ 132.234126] r10:00000280 r9:ee256000 r8:00000080 r7:00000080 r6:ee22d420 r5:ee261400 [ 132.241937] r4:ee256000 [ 132.244461] [] (exynos_update_plane) from [] (__setplane_internal+0x1a4/0x2c0) [ 132.253395] r7:ee261400 r6:ee22d420 r5:00000002 r4:01e00000 [ 132.259041] [] (__setplane_internal) from [] (drm_mode_setplane+0x180/0x244) [ 132.267804] r9:000001e0 r8:01e00000 r7:00000000 r6:ee22d420 r5:ee261400 r4:ee22d460 [ 132.275535] [] (drm_mode_setplane) from [] (drm_ioctl+0x1d0/0x58c) [ 132.283428] r10:ec4ffe54 r9:edbf7300 r8:ec4ffe54 r7:ee013800 r6:000000b7 r5:c072df54 [ 132.291240] r4:c06c6448 [ 132.293763] [] (drm_ioctl) from [] (do_vfs_ioctl+0x430/0x614) [ 132.301222] r10:ee3f2040 r9:bed45d38 r8:00000003 r7:bed45d38 r6:00000003 r5:edbf7000 [ 132.309034] r4:edbf7000 [ 132.311555] [] (do_vfs_ioctl) from [] (SyS_ioctl+0x3c/0x64) [ 132.318842] r10:00000000 r9:ec4fe000 r8:00000003 r7:bed45d38 r6:c03064b7 r5:edbf7000 [ 132.326654] r4:edbf7000 [ 132.329176] [] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x34) [ 132.336723] r8:c000ede4 r7:00000036 r6:c03064b7 r5:bed45d38 r4:00000000 r3:00000022 [ 132.344451] Code: e3130002 0affffaf eb09a67d eaffffad (e7f001f2) [ 132.350528] ---[ end trace d428689b94df895c ]--- [ 132.355126] Kernel panic - not syncing: Fatal exception in interrupt [ 132.361465] CPU2: stopping [ 132.364155] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D W 4.0.1-debug+ #3 [ 132.371791] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 132.377866] Backtrace: [ 132.380304] [] (dump_backtrace) from [] (show_stack+0x18/0x1c) [ 132.387849] r6:c06e158c r5:ffffffff r4:00000000 r3:dc8ba201 [ 132.393497] [] (show_stack) from [] (dump_stack+0x88/0xc8) [ 132.400698] [] (dump_stack) from [] (handle_IPI+0x1c8/0x2c4) [ 132.408073] r6:c06bfc54 r5:c06bfc54 r4:00000005 r3:ee0b0000 [ 132.413718] [] (handle_IPI) from [] (gic_handle_irq+0x6c/0x70) [ 132.421267] r9:f0028000 r8:ee0b1f48 r7:c06c680c r6:fffffff5 r5:00000005 r4:f002800c [ 132.428995] [] (gic_handle_irq) from [] (__irq_svc+0x40/0x74) [ 132.436457] Exception stack(0xee0b1f48 to 0xee0b1f90) [ 132.441493] 1f40: 00000001 00000000 00000000 c00206c0 c06c6518 c04eb3a4 [ 132.449653] 1f60: 00000000 00000000 c06c0dc0 00000001 c06fb774 ee0b1f9c ee0b1fa0 ee0b1f90 [ 132.457811] 1f80: c000f82c c000f830 600f0053 ffffffff [ 132.462844] r9:00000001 r8:c06c0dc0 r7:ee0b1f7c r6:ffffffff r5:600f0053 r4:c000f830 [ 132.470575] [] (arch_cpu_idle) from [] (cpu_startup_entry+0x318/0x4ec) [ 132.478818] [] (cpu_startup_entry) from [] (secondary_start_kernel+0xf4/0x100) [ 132.487755] r7:c06fd440 [ 132.490279] [] (secondary_start_kernel) from [<40008744>] (0x40008744) [ 132.497651] r4:6e09006a r3:c000872c [ 132.501210] CPU3: stopping [ 132.503904] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D W 4.0.1-debug+ #3 [ 132.511539] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 132.517614] Backtrace: [ 132.520051] [] (dump_backtrace) from [] (show_stack+0x18/0x1c) [ 132.527597] r6:c06e158c r5:ffffffff r4:00000000 r3:dc8ba201 [ 132.533243] [] (show_stack) from [] (dump_stack+0x88/0xc8) [ 132.540446] [] (dump_stack) from [] (handle_IPI+0x1c8/0x2c4) [ 132.547820] r6:c06bfc54 r5:c06bfc54 r4:00000005 r3:ee0b2000 [ 132.553466] [] (handle_IPI) from [] (gic_handle_irq+0x6c/0x70) [ 132.561014] r9:f002c000 r8:ee0b3f48 r7:c06c680c r6:fffffff5 r5:00000005 r4:f002c00c [ 132.568743] [] (gic_handle_irq) from [] (__irq_svc+0x40/0x74) [ 132.576205] Exception stack(0xee0b3f48 to 0xee0b3f90) [ 132.581241] 3f40: 00000001 00000000 00000000 c00206c0 c06c6518 c04eb3a4 [ 132.589401] 3f60: 00000000 00000000 c06c0dc0 00000001 c06fb774 ee0b3f9c ee0b3fa0 ee0b3f90 [ 132.597558] 3f80: c000f82c c000f830 600f0053 ffffffff [ 132.602591] r9:00000001 r8:c06c0dc0 r7:ee0b3f7c r6:ffffffff r5:600f0053 r4:c000f830 [ 132.610321] [] (arch_cpu_idle) from [] (cpu_startup_entry+0x318/0x4ec) [ 132.618566] [] (cpu_startup_entry) from [] (secondary_start_kernel+0xf4/0x100) [ 132.627503] r7:c06fd440 [ 132.630023] [] (secondary_start_kernel) from [<40008744>] (0x40008744) [ 132.637399] r4:6e09006a r3:c000872c [ 132.640958] CPU1: stopping [ 132.643651] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D W 4.0.1-debug+ #3 [ 132.651287] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 132.657362] Backtrace: [ 132.659799] [] (dump_backtrace) from [] (show_stack+0x18/0x1c) [ 132.667344] r6:c06e158c r5:ffffffff r4:00000000 r3:dc8ba201 [ 132.672991] [] (show_stack) from [] (dump_stack+0x88/0xc8) [ 132.680194] [] (dump_stack) from [] (handle_IPI+0x1c8/0x2c4) [ 132.687569] r6:c06bfc54 r5:c06bfc54 r4:00000005 r3:ee0ae000 [ 132.693214] [] (handle_IPI) from [] (gic_handle_irq+0x6c/0x70) [ 132.700762] r9:f0024000 r8:ee0aff48 r7:c06c680c r6:fffffff5 r5:00000005 r4:f002400c [ 132.708491] [] (gic_handle_irq) from [] (__irq_svc+0x40/0x74) [ 132.715953] Exception stack(0xee0aff48 to 0xee0aff90) [ 132.720989] ff40: 00000001 00000000 00000000 c00206c0 c06c6518 c04eb3a4 [ 132.729149] ff60: 00000000 00000000 c06c0dc0 00000001 c06fb774 ee0aff9c ee0affa0 ee0aff90 [ 132.737306] ff80: c000f82c c000f830 60070053 ffffffff [ 132.742339] r9:00000001 r8:c06c0dc0 r7:ee0aff7c r6:ffffffff r5:60070053 r4:c000f830 [ 132.750069] [] (arch_cpu_idle) from [] (cpu_startup_entry+0x318/0x4ec) [ 132.758314] [] (cpu_startup_entry) from [] (secondary_start_kernel+0xf4/0x100) [ 132.767251] r7:c06fd440 [ 132.769772] [] (secondary_start_kernel) from [<40008744>] (0x40008744) [ 132.777146] r4:6e09006a r3:c000872c [ 132.780709] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Tobias Jakobi Reviewed-by: Gustavo Padovan Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_mixer.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 31c1793bc97b..285e1569e6ad 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -365,8 +365,6 @@ static void mixer_run(struct mixer_context *ctx) struct mixer_resources *res = &ctx->mixer_res; mixer_reg_writemask(res, MXR_STATUS, ~0, MXR_STATUS_REG_RUN); - - mixer_regs_dump(ctx); } static void mixer_stop(struct mixer_context *ctx) @@ -379,8 +377,6 @@ static void mixer_stop(struct mixer_context *ctx) while (!(mixer_reg_read(res, MXR_STATUS) & MXR_STATUS_REG_IDLE) && --timeout) usleep_range(10000, 12000); - - mixer_regs_dump(ctx); } static void vp_video_buffer(struct mixer_context *ctx, int win) @@ -480,6 +476,7 @@ static void vp_video_buffer(struct mixer_context *ctx, int win) mixer_vsync_set_update(ctx, true); spin_unlock_irqrestore(&res->reg_slock, flags); + mixer_regs_dump(ctx); vp_regs_dump(ctx); } @@ -620,6 +617,8 @@ static void mixer_graph_buffer(struct mixer_context *ctx, int win) mixer_vsync_set_update(ctx, true); spin_unlock_irqrestore(&res->reg_slock, flags); + + mixer_regs_dump(ctx); } static void vp_win_reset(struct mixer_context *ctx) @@ -1073,6 +1072,7 @@ static void mixer_poweroff(struct mixer_context *ctx) mutex_unlock(&ctx->mixer_mutex); mixer_stop(ctx); + mixer_regs_dump(ctx); mixer_window_suspend(ctx); ctx->int_en = mixer_reg_read(res, MXR_INT_EN); From 5b1d5bc690a9666b375496f5d680278f19687bc4 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Wed, 6 May 2015 14:10:22 +0200 Subject: [PATCH 147/337] drm/exynos: 'win' is always unsigned The index for the hardware layer is always >=0. Previous code that also used -1 as special index is now gone. Also apply this to 'ch_enabled' (decon/fimd), since the variable is on the same line (and is again always unsigned). Signed-off-by: Tobias Jakobi Reviewed-by: Gustavo Padovan Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos7_drm_decon.c | 2 +- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 7 ++++--- drivers/gpu/drm/exynos/exynos_mixer.c | 7 ++++--- 3 files changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos7_drm_decon.c b/drivers/gpu/drm/exynos/exynos7_drm_decon.c index 3d00df76220d..6714e5b193ea 100644 --- a/drivers/gpu/drm/exynos/exynos7_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos7_drm_decon.c @@ -91,7 +91,7 @@ static void decon_wait_for_vblank(struct exynos_drm_crtc *crtc) static void decon_clear_channel(struct decon_context *ctx) { - int win, ch_enabled = 0; + unsigned int win, ch_enabled = 0; DRM_DEBUG_KMS("%s\n", __FILE__); diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index d704f2ba7179..a0edab833148 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -215,7 +215,7 @@ static void fimd_wait_for_vblank(struct exynos_drm_crtc *crtc) DRM_DEBUG_KMS("vblank wait timed out.\n"); } -static void fimd_enable_video_output(struct fimd_context *ctx, int win, +static void fimd_enable_video_output(struct fimd_context *ctx, unsigned int win, bool enable) { u32 val = readl(ctx->regs + WINCON(win)); @@ -228,7 +228,8 @@ static void fimd_enable_video_output(struct fimd_context *ctx, int win, writel(val, ctx->regs + WINCON(win)); } -static void fimd_enable_shadow_channel_path(struct fimd_context *ctx, int win, +static void fimd_enable_shadow_channel_path(struct fimd_context *ctx, + unsigned int win, bool enable) { u32 val = readl(ctx->regs + SHADOWCON); @@ -243,7 +244,7 @@ static void fimd_enable_shadow_channel_path(struct fimd_context *ctx, int win, static void fimd_clear_channel(struct fimd_context *ctx) { - int win, ch_enabled = 0; + unsigned int win, ch_enabled = 0; DRM_DEBUG_KMS("%s\n", __FILE__); diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 285e1569e6ad..8874c1fcb3ab 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -333,7 +333,8 @@ static void mixer_cfg_rgb_fmt(struct mixer_context *ctx, unsigned int height) mixer_reg_writemask(res, MXR_CFG, val, MXR_CFG_RGB_FMT_MASK); } -static void mixer_cfg_layer(struct mixer_context *ctx, int win, bool enable) +static void mixer_cfg_layer(struct mixer_context *ctx, unsigned int win, + bool enable) { struct mixer_resources *res = &ctx->mixer_res; u32 val = enable ? ~0 : 0; @@ -379,7 +380,7 @@ static void mixer_stop(struct mixer_context *ctx) usleep_range(10000, 12000); } -static void vp_video_buffer(struct mixer_context *ctx, int win) +static void vp_video_buffer(struct mixer_context *ctx, unsigned int win) { struct mixer_resources *res = &ctx->mixer_res; unsigned long flags; @@ -511,7 +512,7 @@ fail: return -ENOTSUPP; } -static void mixer_graph_buffer(struct mixer_context *ctx, int win) +static void mixer_graph_buffer(struct mixer_context *ctx, unsigned int win) { struct mixer_resources *res = &ctx->mixer_res; unsigned long flags; From be083a002f421bea1fccc2c8a14ffb2c640fe792 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Sat, 25 Apr 2015 20:06:54 +0200 Subject: [PATCH 148/337] drm/exynos: cleanup exynos_drm_plane Remove the unused fields of struct exynos_drm_plane. v2: Remove index_color as well, also unused (thanks Joonyoung). Signed-off-by: Tobias Jakobi Reviewed-by: Gustavo Padovan Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_drv.h | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index 0e951226ca06..29e3fb78c615 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -71,13 +71,6 @@ enum exynos_drm_output_type { * @dma_addr: array of bus(accessed by dma) address to the memory region * allocated for a overlay. * @zpos: order of overlay layer(z position). - * @index_color: if using color key feature then this value would be used - * as index color. - * @default_win: a window to be enabled. - * @color_key: color key on or off. - * @local_path: in case of lcd type, local path mode on or off. - * @transparency: transparency on or off. - * @activated: activated or not. * @enabled: enabled or not. * @resume: to resume or not. * @@ -108,13 +101,7 @@ struct exynos_drm_plane { uint32_t pixel_format; dma_addr_t dma_addr[MAX_FB_BUFFER]; unsigned int zpos; - unsigned int index_color; - bool default_win:1; - bool color_key:1; - bool local_path:1; - bool transparency:1; - bool activated:1; bool enabled:1; bool resume:1; }; From b0f155ada4c819f06aa32b4c906e7e76350c7ec1 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 14 May 2015 09:03:06 +0900 Subject: [PATCH 149/337] drm/exynos: dp: Lower level of EDID read success message Don't pollute the dmesg with EDID read success message as an error. Printing as debug should be fine. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_dp_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_dp_core.c b/drivers/gpu/drm/exynos/exynos_dp_core.c index 441ef06b8894..30feb7d06624 100644 --- a/drivers/gpu/drm/exynos/exynos_dp_core.c +++ b/drivers/gpu/drm/exynos/exynos_dp_core.c @@ -195,7 +195,7 @@ static int exynos_dp_read_edid(struct exynos_dp_device *dp) } } - dev_err(dp->dev, "EDID Read success!\n"); + dev_dbg(dp->dev, "EDID Read success!\n"); return 0; } From e46b5a6470a5e2c8e1096f8f60887ac19949055b Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 19 May 2015 22:06:41 +0800 Subject: [PATCH 150/337] ARM: dts: fix imx27 dtb build rule The i.MX27 dtb build should be controlled by CONFIG_SOC_IMX27 rather than CONFIG_SOC_IMX31. Signed-off-by: Shawn Guo Fixes: cb612390e546 ("ARM: dts: Only build dtb if associated Arch and/or SoC is enabled") Cc: --- arch/arm/boot/dts/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 86217db2937a..992736b5229b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -223,7 +223,7 @@ dtb-$(CONFIG_SOC_IMX25) += \ imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \ imx25-karo-tx25.dtb \ imx25-pdk.dtb -dtb-$(CONFIG_SOC_IMX31) += \ +dtb-$(CONFIG_SOC_IMX27) += \ imx27-apf27.dtb \ imx27-apf27dev.dtb \ imx27-eukrea-mbimxsd27-baseboard.dtb \ From 1e70897d0e20f988abedcf73b33684ecd2be9511 Mon Sep 17 00:00:00 2001 From: Naidu Tellapati Date: Fri, 8 May 2015 18:47:31 -0300 Subject: [PATCH 151/337] pwm: img: Impose upper and lower timebase steps value The PWM hardware on Pistachio platform has a maximum timebase steps value to 255. To fix it, let's introduce a compatible-specific data structure to contain the SoC-specific details and use it to specify a maximum timebase. Also, let's limit the minimum timebase to 16 steps, to allow a sane range of duty cycle steps. Fixes: 277bb6a29e00 ("pwm: Imagination Technologies PWM DAC driver") Signed-off-by: Naidu Tellapati Signed-off-by: Ezequiel Garcia Signed-off-by: Thierry Reding --- drivers/pwm/pwm-img.c | 76 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 64 insertions(+), 12 deletions(-) diff --git a/drivers/pwm/pwm-img.c b/drivers/pwm/pwm-img.c index 476171a768d6..8a029f9bc18c 100644 --- a/drivers/pwm/pwm-img.c +++ b/drivers/pwm/pwm-img.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -38,7 +39,22 @@ #define PERIP_PWM_PDM_CONTROL_CH_MASK 0x1 #define PERIP_PWM_PDM_CONTROL_CH_SHIFT(ch) ((ch) * 4) -#define MAX_TMBASE_STEPS 65536 +/* + * PWM period is specified with a timebase register, + * in number of step periods. The PWM duty cycle is also + * specified in step periods, in the [0, $timebase] range. + * In other words, the timebase imposes the duty cycle + * resolution. Therefore, let's constraint the timebase to + * a minimum value to allow a sane range of duty cycle values. + * Imposing a minimum timebase, will impose a maximum PWM frequency. + * + * The value chosen is completely arbitrary. + */ +#define MIN_TMBASE_STEPS 16 + +struct img_pwm_soc_data { + u32 max_timebase; +}; struct img_pwm_chip { struct device *dev; @@ -47,6 +63,9 @@ struct img_pwm_chip { struct clk *sys_clk; void __iomem *base; struct regmap *periph_regs; + int max_period_ns; + int min_period_ns; + const struct img_pwm_soc_data *data; }; static inline struct img_pwm_chip *to_img_pwm_chip(struct pwm_chip *chip) @@ -72,24 +91,31 @@ static int img_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, u32 val, div, duty, timebase; unsigned long mul, output_clk_hz, input_clk_hz; struct img_pwm_chip *pwm_chip = to_img_pwm_chip(chip); + unsigned int max_timebase = pwm_chip->data->max_timebase; + + if (period_ns < pwm_chip->min_period_ns || + period_ns > pwm_chip->max_period_ns) { + dev_err(chip->dev, "configured period not in range\n"); + return -ERANGE; + } input_clk_hz = clk_get_rate(pwm_chip->pwm_clk); output_clk_hz = DIV_ROUND_UP(NSEC_PER_SEC, period_ns); mul = DIV_ROUND_UP(input_clk_hz, output_clk_hz); - if (mul <= MAX_TMBASE_STEPS) { + if (mul <= max_timebase) { div = PWM_CTRL_CFG_NO_SUB_DIV; timebase = DIV_ROUND_UP(mul, 1); - } else if (mul <= MAX_TMBASE_STEPS * 8) { + } else if (mul <= max_timebase * 8) { div = PWM_CTRL_CFG_SUB_DIV0; timebase = DIV_ROUND_UP(mul, 8); - } else if (mul <= MAX_TMBASE_STEPS * 64) { + } else if (mul <= max_timebase * 64) { div = PWM_CTRL_CFG_SUB_DIV1; timebase = DIV_ROUND_UP(mul, 64); - } else if (mul <= MAX_TMBASE_STEPS * 512) { + } else if (mul <= max_timebase * 512) { div = PWM_CTRL_CFG_SUB_DIV0_DIV1; timebase = DIV_ROUND_UP(mul, 512); - } else if (mul > MAX_TMBASE_STEPS * 512) { + } else if (mul > max_timebase * 512) { dev_err(chip->dev, "failed to configure timebase steps/divider value\n"); return -EINVAL; @@ -143,11 +169,27 @@ static const struct pwm_ops img_pwm_ops = { .owner = THIS_MODULE, }; +static const struct img_pwm_soc_data pistachio_pwm = { + .max_timebase = 255, +}; + +static const struct of_device_id img_pwm_of_match[] = { + { + .compatible = "img,pistachio-pwm", + .data = &pistachio_pwm, + }, + { } +}; +MODULE_DEVICE_TABLE(of, img_pwm_of_match); + static int img_pwm_probe(struct platform_device *pdev) { int ret; + u64 val; + unsigned long clk_rate; struct resource *res; struct img_pwm_chip *pwm; + const struct of_device_id *of_dev_id; pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL); if (!pwm) @@ -160,6 +202,11 @@ static int img_pwm_probe(struct platform_device *pdev) if (IS_ERR(pwm->base)) return PTR_ERR(pwm->base); + of_dev_id = of_match_device(img_pwm_of_match, &pdev->dev); + if (!of_dev_id) + return -ENODEV; + pwm->data = of_dev_id->data; + pwm->periph_regs = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "img,cr-periph"); if (IS_ERR(pwm->periph_regs)) @@ -189,6 +236,17 @@ static int img_pwm_probe(struct platform_device *pdev) goto disable_sysclk; } + clk_rate = clk_get_rate(pwm->pwm_clk); + + /* The maximum input clock divider is 512 */ + val = (u64)NSEC_PER_SEC * 512 * pwm->data->max_timebase; + do_div(val, clk_rate); + pwm->max_period_ns = val; + + val = (u64)NSEC_PER_SEC * MIN_TMBASE_STEPS; + do_div(val, clk_rate); + pwm->min_period_ns = val; + pwm->chip.dev = &pdev->dev; pwm->chip.ops = &img_pwm_ops; pwm->chip.base = -1; @@ -228,12 +286,6 @@ static int img_pwm_remove(struct platform_device *pdev) return pwmchip_remove(&pwm_chip->chip); } -static const struct of_device_id img_pwm_of_match[] = { - { .compatible = "img,pistachio-pwm", }, - { } -}; -MODULE_DEVICE_TABLE(of, img_pwm_of_match); - static struct platform_driver img_pwm_driver = { .driver = { .name = "img-pwm", From b5d721d761fccf491f92eefc611e318561683d0a Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 18 May 2015 17:06:14 -0700 Subject: [PATCH 152/337] inet: properly align icsk_ca_priv tcp_illinois and upcoming tcp_cdg require 64bit alignment of icsk_ca_priv x86 does not care, but other architectures might. Fixes: 05cbc0db03e82 ("ipv4: Create probe timer for tcp PMTU as per RFC4821") Signed-off-by: Eric Dumazet Cc: Fan Du Acked-by: Fan Du Signed-off-by: David S. Miller --- include/net/inet_connection_sock.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/include/net/inet_connection_sock.h b/include/net/inet_connection_sock.h index 48a815823587..497bc14cdb85 100644 --- a/include/net/inet_connection_sock.h +++ b/include/net/inet_connection_sock.h @@ -129,9 +129,10 @@ struct inet_connection_sock { u32 probe_timestamp; } icsk_mtup; - u32 icsk_ca_priv[16]; u32 icsk_user_timeout; -#define ICSK_CA_PRIV_SIZE (16 * sizeof(u32)) + + u64 icsk_ca_priv[64 / sizeof(u64)]; +#define ICSK_CA_PRIV_SIZE (8 * sizeof(u64)) }; #define ICSK_TIME_RETRANS 1 /* Retransmit timer */ From 1173ff09b9c57be8248427b7be161f7599dccd6b Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Tue, 19 May 2015 09:07:27 +0200 Subject: [PATCH 153/337] watchdog: fix double lock in watchdog_nmi_enable_all Commit ab992dc38f9a ("watchdog: Fix merge 'conflict'") has introduced an obvious deadlock because of a typo. watchdog_proc_mutex should be unlocked on exit. Thanks to Miroslav Benes who was staring at the code with me and noticed this. Signed-off-by: Michal Hocko Duh-by: Peter Zijlstra Signed-off-by: Linus Torvalds --- kernel/watchdog.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/watchdog.c b/kernel/watchdog.c index 506edcc500c4..581a68a04c64 100644 --- a/kernel/watchdog.c +++ b/kernel/watchdog.c @@ -621,7 +621,7 @@ void watchdog_nmi_enable_all(void) put_online_cpus(); unlock: - mutex_lock(&watchdog_proc_mutex); + mutex_unlock(&watchdog_proc_mutex); } void watchdog_nmi_disable_all(void) From 77bb3dfdc0d554befad58fdefbc41be5bc3ed38a Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Tue, 19 May 2015 18:40:49 +0100 Subject: [PATCH 154/337] xen/events: don't bind non-percpu VIRQs with percpu chip A non-percpu VIRQ (e.g., VIRQ_CONSOLE) may be freed on a different VCPU than it is bound to. This can result in a race between handle_percpu_irq() and removing the action in __free_irq() because handle_percpu_irq() does not take desc->lock. The interrupt handler sees a NULL action and oopses. Only use the percpu chip/handler for per-CPU VIRQs (like VIRQ_TIMER). # cat /proc/interrupts | grep virq 40: 87246 0 xen-percpu-virq timer0 44: 0 0 xen-percpu-virq debug0 47: 0 20995 xen-percpu-virq timer1 51: 0 0 xen-percpu-virq debug1 69: 0 0 xen-dyn-virq xen-pcpu 74: 0 0 xen-dyn-virq mce 75: 29 0 xen-dyn-virq hvc_console Signed-off-by: David Vrabel Cc: --- drivers/tty/hvc/hvc_xen.c | 2 +- drivers/xen/events/events_base.c | 12 ++++++++---- include/xen/events.h | 2 +- 3 files changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c index 5bab1c684bb1..7a3d146a5f0e 100644 --- a/drivers/tty/hvc/hvc_xen.c +++ b/drivers/tty/hvc/hvc_xen.c @@ -289,7 +289,7 @@ static int xen_initial_domain_console_init(void) return -ENOMEM; } - info->irq = bind_virq_to_irq(VIRQ_CONSOLE, 0); + info->irq = bind_virq_to_irq(VIRQ_CONSOLE, 0, false); info->vtermno = HVC_COOKIE; spin_lock(&xencons_lock); diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c index 2b8553bd8715..38387950490e 100644 --- a/drivers/xen/events/events_base.c +++ b/drivers/xen/events/events_base.c @@ -957,7 +957,7 @@ unsigned xen_evtchn_nr_channels(void) } EXPORT_SYMBOL_GPL(xen_evtchn_nr_channels); -int bind_virq_to_irq(unsigned int virq, unsigned int cpu) +int bind_virq_to_irq(unsigned int virq, unsigned int cpu, bool percpu) { struct evtchn_bind_virq bind_virq; int evtchn, irq, ret; @@ -971,8 +971,12 @@ int bind_virq_to_irq(unsigned int virq, unsigned int cpu) if (irq < 0) goto out; - irq_set_chip_and_handler_name(irq, &xen_percpu_chip, - handle_percpu_irq, "virq"); + if (percpu) + irq_set_chip_and_handler_name(irq, &xen_percpu_chip, + handle_percpu_irq, "virq"); + else + irq_set_chip_and_handler_name(irq, &xen_dynamic_chip, + handle_edge_irq, "virq"); bind_virq.virq = virq; bind_virq.vcpu = cpu; @@ -1062,7 +1066,7 @@ int bind_virq_to_irqhandler(unsigned int virq, unsigned int cpu, { int irq, retval; - irq = bind_virq_to_irq(virq, cpu); + irq = bind_virq_to_irq(virq, cpu, irqflags & IRQF_PERCPU); if (irq < 0) return irq; retval = request_irq(irq, handler, irqflags, devname, dev_id); diff --git a/include/xen/events.h b/include/xen/events.h index 5321cd9636e6..7d95fdf9cf3e 100644 --- a/include/xen/events.h +++ b/include/xen/events.h @@ -17,7 +17,7 @@ int bind_evtchn_to_irqhandler(unsigned int evtchn, irq_handler_t handler, unsigned long irqflags, const char *devname, void *dev_id); -int bind_virq_to_irq(unsigned int virq, unsigned int cpu); +int bind_virq_to_irq(unsigned int virq, unsigned int cpu, bool percpu); int bind_virq_to_irqhandler(unsigned int virq, unsigned int cpu, irq_handler_t handler, unsigned long irqflags, const char *devname, From 33b4b015e1a1ca7a8fdce40af5e71642a8ea355c Mon Sep 17 00:00:00 2001 From: Henning Rogge Date: Mon, 18 May 2015 21:08:49 +0200 Subject: [PATCH 155/337] net/ipv6/udp: Fix ipv6 multicast socket filter regression Commit <5cf3d46192fc> ("udp: Simplify__udp*_lib_mcast_deliver") simplified the filter for incoming IPv6 multicast but removed the check of the local socket address and the UDP destination address. This patch restores the filter to prevent sockets bound to a IPv6 multicast IP to receive other UDP traffic link unicast. Signed-off-by: Henning Rogge Fixes: 5cf3d46192fc ("udp: Simplify__udp*_lib_mcast_deliver") Cc: "David S. Miller" Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv6/udp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 3477c919fcc8..c2ec41617a35 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -731,7 +731,9 @@ static bool __udp_v6_is_mcast_sock(struct net *net, struct sock *sk, (inet->inet_dport && inet->inet_dport != rmt_port) || (!ipv6_addr_any(&sk->sk_v6_daddr) && !ipv6_addr_equal(&sk->sk_v6_daddr, rmt_addr)) || - (sk->sk_bound_dev_if && sk->sk_bound_dev_if != dif)) + (sk->sk_bound_dev_if && sk->sk_bound_dev_if != dif) || + (!ipv6_addr_any(&sk->sk_v6_rcv_saddr) && + !ipv6_addr_equal(&sk->sk_v6_rcv_saddr, loc_addr))) return false; if (!inet6_mc_check(sk, loc_addr, rmt_addr)) return false; From da34ac7626b571d262f92b93f11eb32dd58d9c4e Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Mon, 18 May 2015 12:31:44 -0700 Subject: [PATCH 156/337] tcp: only undo on partial ACKs in CA_Loss Undo based on TCP timestamps should only happen on ACKs that advance SND_UNA, according to the Eifel algorithm in RFC 3522: Section 3.2: (4) If the value of the Timestamp Echo Reply field of the acceptable ACK's Timestamps option is smaller than the value of RetransmitTS, then proceed to step (5), Section Terminology: We use the term 'acceptable ACK' as defined in [RFC793]. That is an ACK that acknowledges previously unacknowledged data. This is because upon receiving an out-of-order packet, the receiver returns the last timestamp that advances RCV_NXT, not the current timestamp of the packet in the DUPACK. Without checking the flag, the DUPACK will cause tcp_packet_delayed() to return true and tcp_try_undo_loss() will revert cwnd reduction. Note that we check the condition in CA_Recovery already by only calling tcp_try_undo_partial() if FLAG_SND_UNA_ADVANCED is set or tcp_try_undo_recovery() if snd_una crosses high_seq. Signed-off-by: Yuchung Cheng Signed-off-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index bc790ea9960f..9faf775a8c4a 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -2698,11 +2698,16 @@ static void tcp_process_loss(struct sock *sk, int flag, bool is_dupack) struct tcp_sock *tp = tcp_sk(sk); bool recovered = !before(tp->snd_una, tp->high_seq); + if ((flag & FLAG_SND_UNA_ADVANCED) && + tcp_try_undo_loss(sk, false)) + return; + if (tp->frto) { /* F-RTO RFC5682 sec 3.1 (sack enhanced version). */ /* Step 3.b. A timeout is spurious if not all data are * lost, i.e., never-retransmitted data are (s)acked. */ - if (tcp_try_undo_loss(sk, flag & FLAG_ORIG_SACK_ACKED)) + if ((flag & FLAG_ORIG_SACK_ACKED) && + tcp_try_undo_loss(sk, true)) return; if (after(tp->snd_nxt, tp->high_seq) && @@ -2732,8 +2737,6 @@ static void tcp_process_loss(struct sock *sk, int flag, bool is_dupack) else if (flag & FLAG_SND_UNA_ADVANCED) tcp_reset_reno_sack(tp); } - if (tcp_try_undo_loss(sk, false)) - return; tcp_xmit_retransmit_queue(sk); } From b7b0ed910cd8450db6d98cd4361c644bb1c88412 Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Mon, 18 May 2015 12:31:45 -0700 Subject: [PATCH 157/337] tcp: don't over-send F-RTO probes After sending the new data packets to probe (step 2), F-RTO may incorrectly send more probes if the next ACK advances SND_UNA and does not sack new packet. However F-RTO RFC 5682 probes at most once. This bug may cause sender to always send new data instead of repairing holes, inducing longer HoL blocking on the receiver for the application. Signed-off-by: Yuchung Cheng Signed-off-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 9faf775a8c4a..243d674b3ef5 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -2710,9 +2710,9 @@ static void tcp_process_loss(struct sock *sk, int flag, bool is_dupack) tcp_try_undo_loss(sk, true)) return; - if (after(tp->snd_nxt, tp->high_seq) && - (flag & FLAG_DATA_SACKED || is_dupack)) { - tp->frto = 0; /* Loss was real: 2nd part of step 3.a */ + if (after(tp->snd_nxt, tp->high_seq)) { + if (flag & FLAG_DATA_SACKED || is_dupack) + tp->frto = 0; /* Step 3.a. loss was real */ } else if (flag & FLAG_SND_UNA_ADVANCED && !recovered) { tp->high_seq = tp->snd_nxt; __tcp_push_pending_frames(sk, tcp_current_mss(sk), From ee7619f2eb21304dcc846b8dc8f8c3d6cbe11792 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Tue, 19 May 2015 15:10:44 -0700 Subject: [PATCH 158/337] target: Drop signal_pending checks after interruptible lock acquire Once upon a time, iscsit_get_tpg() was using an un-interruptible lock. The signal_pending() usage was a check to allow userspace to break out of the operation with SIGINT. AFAICT, there's no reason why this is necessary anymore, and as reported by Alexey can be potentially dangerous. Also, go ahead and drop the other two problematic cases within iscsit_access_np() and sbc_compare_and_write() as well. Found by Linux Driver Verification project (linuxtesting.org). Reported-by: Alexey Khoroshilov Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 2 +- drivers/target/iscsi/iscsi_target_tpg.c | 5 +---- drivers/target/target_core_sbc.c | 2 +- 3 files changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 34871a628b11..74e6114ff18f 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -230,7 +230,7 @@ int iscsit_access_np(struct iscsi_np *np, struct iscsi_portal_group *tpg) * Here we serialize access across the TIQN+TPG Tuple. */ ret = down_interruptible(&tpg->np_login_sem); - if ((ret != 0) || signal_pending(current)) + if (ret != 0) return -1; spin_lock_bh(&tpg->tpg_state_lock); diff --git a/drivers/target/iscsi/iscsi_target_tpg.c b/drivers/target/iscsi/iscsi_target_tpg.c index e8a240818353..5e3295fe404d 100644 --- a/drivers/target/iscsi/iscsi_target_tpg.c +++ b/drivers/target/iscsi/iscsi_target_tpg.c @@ -161,10 +161,7 @@ struct iscsi_portal_group *iscsit_get_tpg_from_np( int iscsit_get_tpg( struct iscsi_portal_group *tpg) { - int ret; - - ret = mutex_lock_interruptible(&tpg->tpg_access_lock); - return ((ret != 0) || signal_pending(current)) ? -1 : 0; + return mutex_lock_interruptible(&tpg->tpg_access_lock); } void iscsit_put_tpg(struct iscsi_portal_group *tpg) diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c index 8855781ac653..733824e3825f 100644 --- a/drivers/target/target_core_sbc.c +++ b/drivers/target/target_core_sbc.c @@ -568,7 +568,7 @@ sbc_compare_and_write(struct se_cmd *cmd) * comparision using SGLs at cmd->t_bidi_data_sg.. */ rc = down_interruptible(&dev->caw_sem); - if ((rc != 0) || signal_pending(current)) { + if (rc != 0) { cmd->transport_complete_callback = NULL; return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; } From 2c2ed5aa0154c0be67f98c970de6b5587dbc045a Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Tue, 19 May 2015 12:49:50 -0700 Subject: [PATCH 159/337] btrfs: clear 'ret' in btrfs_check_shared() loop btrfs_check_shared() is leaking a return value of '1' from find_parent_nodes(). As a result, callers (in this case, extent_fiemap()) are told extents are shared when they are not. This in turn broke fiemap on btrfs for kernels v3.18 and up. The fix is simple - we just have to clear 'ret' after we are done processing the results of find_parent_nodes(). It wasn't clear to me at first what was happening with return values in btrfs_check_shared() and find_parent_nodes() - thanks to Josef for the help on irc. I added documentation to both functions to make things more clear for the next hacker who might come across them. If we could queue this up for -stable too that would be great. Signed-off-by: Mark Fasheh Reviewed-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/backref.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index 9de772ee0031..614aaa1969bd 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -880,6 +880,8 @@ static int __add_keyed_refs(struct btrfs_fs_info *fs_info, * indirect refs to their parent bytenr. * When roots are found, they're added to the roots list * + * NOTE: This can return values > 0 + * * FIXME some caching might speed things up */ static int find_parent_nodes(struct btrfs_trans_handle *trans, @@ -1198,6 +1200,19 @@ int btrfs_find_all_roots(struct btrfs_trans_handle *trans, return ret; } +/** + * btrfs_check_shared - tell us whether an extent is shared + * + * @trans: optional trans handle + * + * btrfs_check_shared uses the backref walking code but will short + * circuit as soon as it finds a root or inode that doesn't match the + * one passed in. This provides a significant performance benefit for + * callers (such as fiemap) which want to know whether the extent is + * shared but do not need a ref count. + * + * Return: 0 if extent is not shared, 1 if it is shared, < 0 on error. + */ int btrfs_check_shared(struct btrfs_trans_handle *trans, struct btrfs_fs_info *fs_info, u64 root_objectid, u64 inum, u64 bytenr) @@ -1226,11 +1241,13 @@ int btrfs_check_shared(struct btrfs_trans_handle *trans, ret = find_parent_nodes(trans, fs_info, bytenr, elem.seq, tmp, roots, NULL, root_objectid, inum); if (ret == BACKREF_FOUND_SHARED) { + /* this is the only condition under which we return 1 */ ret = 1; break; } if (ret < 0 && ret != -ENOENT) break; + ret = 0; node = ulist_next(tmp, &uiter); if (!node) break; From a96295965b600f2dc6ad661c4803c86e87db3d7b Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 18 May 2015 19:11:40 +0100 Subject: [PATCH 160/337] Btrfs: fix racy system chunk allocation when setting block group ro If while setting a block group read-only we end up allocating a system chunk, through check_system_chunk(), we were not doing it while holding the chunk mutex which is a problem if a concurrent chunk allocation is happening, through do_chunk_alloc(), as it means both block groups can end up using the same logical addresses and physical regions in the device(s). So make sure we hold the chunk mutex. Cc: stable@vger.kernel.org # 4.0+ Fixes: 2f0810880f08 ("btrfs: delete chunk allocation attemp when setting block group ro") Signed-off-by: Filipe Manana Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 2 ++ fs/btrfs/volumes.c | 1 + 2 files changed, 3 insertions(+) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 7effed6f2fa6..45e3f086790b 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -8842,7 +8842,9 @@ again: out: if (cache->flags & BTRFS_BLOCK_GROUP_SYSTEM) { alloc_flags = update_block_group_flags(root, cache->flags); + lock_chunks(root->fs_info->chunk_root); check_system_chunk(trans, root, alloc_flags); + unlock_chunks(root->fs_info->chunk_root); } mutex_unlock(&root->fs_info->ro_block_group_mutex); diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 96aebf3bcd5b..174f5e1e00ab 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -4625,6 +4625,7 @@ int btrfs_alloc_chunk(struct btrfs_trans_handle *trans, { u64 chunk_offset; + ASSERT(mutex_is_locked(&extent_root->fs_info->chunk_mutex)); chunk_offset = find_next_chunk(extent_root->fs_info); return __btrfs_alloc_chunk(trans, extent_root, chunk_offset, type); } From 976fa9a3ac9223d134cb4e1e3acf0e57160ee924 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 19 May 2015 17:20:36 +0200 Subject: [PATCH 161/337] ALSA: sound/atmel/ac97c.c: remove unused variable The recently added DT support for the ac97 driver is causing a gcc warning: sound/atmel/ac97c.c: In function 'atmel_ac97c_probe_dt': sound/atmel/ac97c.c:919:29: warning: unused variable 'match' [-Wunused-variable] const struct of_device_id *match; The variable is clearly unused, so we can remove it. Signed-off-by: Arnd Bergmann Acked-by: Alexander Stein Signed-off-by: Takashi Iwai --- sound/atmel/ac97c.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c index cf4cedf2b420..6dad042630d8 100644 --- a/sound/atmel/ac97c.c +++ b/sound/atmel/ac97c.c @@ -916,7 +916,6 @@ static struct ac97c_platform_data *atmel_ac97c_probe_dt(struct device *dev) { struct ac97c_platform_data *pdata; struct device_node *node = dev->of_node; - const struct of_device_id *match; if (!node) { dev_err(dev, "Device does not have associated DT data\n"); From 48f4b3a2ece560e37232fe9d681cd2ff0f3ff10d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 20 May 2015 06:49:37 +0200 Subject: [PATCH 162/337] ALSA: hda - Reduce verbs by node power-saves The widget (node) power-saves restore the widget states at each transition from D3 to D0 on each node. This was added in the commit [d545a57c5f84:ALSA: hda - Sync node attributes at resume from widget power saving]. However, the test was rater false-positive; this wasn't needed for any codecs. Since the resync may take significant number of additional verbs to be executed, it's better to reduce it. Let's disable it for now again. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_generic.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index 788f969b1a68..1c8678775f40 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -844,8 +844,16 @@ static hda_nid_t path_power_update(struct hda_codec *codec, snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_POWER_STATE, state); changed = nid; + /* all known codecs seem to be capable to handl + * widgets state even in D3, so far. + * if any new codecs need to restore the widget + * states after D0 transition, call the function + * below. + */ +#if 0 /* disabled */ if (state == AC_PWRST_D0) snd_hdac_regmap_sync_node(&codec->core, nid); +#endif } } return changed; From 219f47e4f96442a7fe8fb646c59c6730690a9e66 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 20 May 2015 06:56:23 +0200 Subject: [PATCH 163/337] ALSA: hda - Disable widget power-saving for ALC292 & co We've got reports that ALC3226 (a Dell variant of ALC292) gives click noises at transition from D3 to D0 when the widget power-saving is enabled. Further debugging session showed that avoiding it isn't trivial, unfortunately, since paths are basically activated dynamically while the pins have been already enabled. This patch disables the widget power-saving for such codecs. Reported-by: Jonathan McDowell Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 2e246fe495f6..31f8f13be907 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin = 0x18; - codec->power_save_node = 1; + if (codec->core.vendor_id != 0x10ec0292) + codec->power_save_node = 1; snd_hda_pick_fixup(codec, alc269_fixup_models, alc269_fixup_tbl, alc269_fixups); From 5fb73bc2c8301ad106df0e858e60875cd2ae95cb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Tue, 19 May 2015 19:45:03 +0200 Subject: [PATCH 164/337] thinkpad_acpi: Revert unintentional device attribute renaming MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The conversion to DEVICE_ATTR_* macros failed to fixup a few cases where the old attribute names didn't match the show/store function names. Instead of renaming the functions, the attributes were renamed. This caused an unintentional API change. The hwmon required 'name' attribute were among the renamed attribute, causing libsensors to fail to detect the hwmon device at all. Fix by using the DEVICE_ATTR macro for these attributes, allowing the show/store functions to keep their system specific prefixes. Fixes: b4dd04ac6ef8 ("thinkpad_acpi: use DEVICE_ATTR_* macros") Cc: Bastien Nocera Signed-off-by: Bjørn Mork Acked-by: Henrique de Moraes Holschuh Signed-off-by: Darren Hart --- drivers/platform/x86/thinkpad_acpi.c | 37 ++++++++++++++-------------- 1 file changed, 19 insertions(+), 18 deletions(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 9bb9ad6d4a1b..28f328136f0d 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -2897,7 +2897,7 @@ static ssize_t hotkey_wakeup_reason_show(struct device *dev, return snprintf(buf, PAGE_SIZE, "%d\n", hotkey_wakeup_reason); } -static DEVICE_ATTR_RO(hotkey_wakeup_reason); +static DEVICE_ATTR(wakeup_reason, S_IRUGO, hotkey_wakeup_reason_show, NULL); static void hotkey_wakeup_reason_notify_change(void) { @@ -2913,7 +2913,8 @@ static ssize_t hotkey_wakeup_hotunplug_complete_show(struct device *dev, return snprintf(buf, PAGE_SIZE, "%d\n", hotkey_autosleep_ack); } -static DEVICE_ATTR_RO(hotkey_wakeup_hotunplug_complete); +static DEVICE_ATTR(wakeup_hotunplug_complete, S_IRUGO, + hotkey_wakeup_hotunplug_complete_show, NULL); static void hotkey_wakeup_hotunplug_complete_notify_change(void) { @@ -2978,8 +2979,8 @@ static struct attribute *hotkey_attributes[] __initdata = { &dev_attr_hotkey_enable.attr, &dev_attr_hotkey_bios_enabled.attr, &dev_attr_hotkey_bios_mask.attr, - &dev_attr_hotkey_wakeup_reason.attr, - &dev_attr_hotkey_wakeup_hotunplug_complete.attr, + &dev_attr_wakeup_reason.attr, + &dev_attr_wakeup_hotunplug_complete.attr, &dev_attr_hotkey_mask.attr, &dev_attr_hotkey_all_mask.attr, &dev_attr_hotkey_recommended_mask.attr, @@ -4393,12 +4394,13 @@ static ssize_t wan_enable_store(struct device *dev, attr, buf, count); } -static DEVICE_ATTR_RW(wan_enable); +static DEVICE_ATTR(wwan_enable, S_IWUSR | S_IRUGO, + wan_enable_show, wan_enable_store); /* --------------------------------------------------------------------- */ static struct attribute *wan_attributes[] = { - &dev_attr_wan_enable.attr, + &dev_attr_wwan_enable.attr, NULL }; @@ -8138,7 +8140,8 @@ static ssize_t fan_pwm1_enable_store(struct device *dev, return count; } -static DEVICE_ATTR_RW(fan_pwm1_enable); +static DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, + fan_pwm1_enable_show, fan_pwm1_enable_store); /* sysfs fan pwm1 ------------------------------------------------------ */ static ssize_t fan_pwm1_show(struct device *dev, @@ -8198,7 +8201,7 @@ static ssize_t fan_pwm1_store(struct device *dev, return (rc) ? rc : count; } -static DEVICE_ATTR_RW(fan_pwm1); +static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, fan_pwm1_show, fan_pwm1_store); /* sysfs fan fan1_input ------------------------------------------------ */ static ssize_t fan_fan1_input_show(struct device *dev, @@ -8215,7 +8218,7 @@ static ssize_t fan_fan1_input_show(struct device *dev, return snprintf(buf, PAGE_SIZE, "%u\n", speed); } -static DEVICE_ATTR_RO(fan_fan1_input); +static DEVICE_ATTR(fan1_input, S_IRUGO, fan_fan1_input_show, NULL); /* sysfs fan fan2_input ------------------------------------------------ */ static ssize_t fan_fan2_input_show(struct device *dev, @@ -8232,7 +8235,7 @@ static ssize_t fan_fan2_input_show(struct device *dev, return snprintf(buf, PAGE_SIZE, "%u\n", speed); } -static DEVICE_ATTR_RO(fan_fan2_input); +static DEVICE_ATTR(fan2_input, S_IRUGO, fan_fan2_input_show, NULL); /* sysfs fan fan_watchdog (hwmon driver) ------------------------------- */ static ssize_t fan_fan_watchdog_show(struct device_driver *drv, @@ -8265,8 +8268,8 @@ static DRIVER_ATTR(fan_watchdog, S_IWUSR | S_IRUGO, /* --------------------------------------------------------------------- */ static struct attribute *fan_attributes[] = { - &dev_attr_fan_pwm1_enable.attr, &dev_attr_fan_pwm1.attr, - &dev_attr_fan_fan1_input.attr, + &dev_attr_pwm1_enable.attr, &dev_attr_pwm1.attr, + &dev_attr_fan1_input.attr, NULL, /* for fan2_input */ NULL }; @@ -8400,7 +8403,7 @@ static int __init fan_init(struct ibm_init_struct *iibm) if (tp_features.second_fan) { /* attach second fan tachometer */ fan_attributes[ARRAY_SIZE(fan_attributes)-2] = - &dev_attr_fan_fan2_input.attr; + &dev_attr_fan2_input.attr; } rc = sysfs_create_group(&tpacpi_sensors_pdev->dev.kobj, &fan_attr_group); @@ -8848,7 +8851,7 @@ static ssize_t thinkpad_acpi_pdev_name_show(struct device *dev, return snprintf(buf, PAGE_SIZE, "%s\n", TPACPI_NAME); } -static DEVICE_ATTR_RO(thinkpad_acpi_pdev_name); +static DEVICE_ATTR(name, S_IRUGO, thinkpad_acpi_pdev_name_show, NULL); /* --------------------------------------------------------------------- */ @@ -9390,8 +9393,7 @@ static void thinkpad_acpi_module_exit(void) hwmon_device_unregister(tpacpi_hwmon); if (tp_features.sensors_pdev_attrs_registered) - device_remove_file(&tpacpi_sensors_pdev->dev, - &dev_attr_thinkpad_acpi_pdev_name); + device_remove_file(&tpacpi_sensors_pdev->dev, &dev_attr_name); if (tpacpi_sensors_pdev) platform_device_unregister(tpacpi_sensors_pdev); if (tpacpi_pdev) @@ -9512,8 +9514,7 @@ static int __init thinkpad_acpi_module_init(void) thinkpad_acpi_module_exit(); return ret; } - ret = device_create_file(&tpacpi_sensors_pdev->dev, - &dev_attr_thinkpad_acpi_pdev_name); + ret = device_create_file(&tpacpi_sensors_pdev->dev, &dev_attr_name); if (ret) { pr_err("unable to create sysfs hwmon device attributes\n"); thinkpad_acpi_module_exit(); From e88221c50cadade0eb4f7f149f4967d760212695 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 20 May 2015 11:45:30 +0200 Subject: [PATCH 165/337] x86/fpu: Disable XSAVES* support for now The kernel's handling of 'compacted' xsave state layout is buggy: http://marc.info/?l=linux-kernel&m=142967852317199 I don't have such a system, and the description there is vague, but from extrapolation I guess that there were two kinds of bugs observed: - boot crashes, due to size calculations being wrong and the dynamic allocation allocating a too small xstate area. (This is now fixed in the new FPU code - but still present in stable kernels.) - FPU state corruption and ABI breakage: if signal handlers try to change the FPU state in standard format, which then the kernel tries to restore in the compacted format. These breakages are scary, but they only occur on a small number of systems that have XSAVES* CPU support. Yet we have had XSAVES support in the upstream kernel for a large number of stable kernel releases, and the fixes are involved and unproven. So do the safe resolution first: disable XSAVES* support and only use the standard xstate format. This makes the code work and is easy to backport. On top of this we can work on enabling (and testing!) proper compacted format support, without backporting pressure, on top of the new, cleaned up FPU code. Cc: Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Dave Hansen Cc: Fenghua Yu Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Oleg Nesterov Cc: Peter Zijlstra Cc: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/i387.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index 009183276bb7..6185d3141219 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -173,6 +173,21 @@ static void init_thread_xstate(void) xstate_size = sizeof(struct i387_fxsave_struct); else xstate_size = sizeof(struct i387_fsave_struct); + + /* + * Quirk: we don't yet handle the XSAVES* instructions + * correctly, as we don't correctly convert between + * standard and compacted format when interfacing + * with user-space - so disable it for now. + * + * The difference is small: with recent CPUs the + * compacted format is only marginally smaller than + * the standard FPU state format. + * + * ( This is easy to backport while we are fixing + * XSAVES* support. ) + */ + setup_clear_cpu_cap(X86_FEATURE_XSAVES); } /* From 26ba61f871b4aa9958bcebffcbeb558094d75928 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Tue, 19 May 2015 17:42:02 -0700 Subject: [PATCH 166/337] HID: wacom: fix an Oops caused by wacom_wac_finger_count_touches We assumed all touch interfaces report touch data. But, Bamboo and Intuos non-touch devices report express keys on touch interface. We need to check touch_max before counting touches. Reported-by: Tasos Sahanidis Signed-off-by: Ping Cheng Signed-off-by: Jiri Kosina --- drivers/hid/wacom_wac.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index fa54d3290659..adf959dcfa5d 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -1072,6 +1072,9 @@ static int wacom_wac_finger_count_touches(struct wacom_wac *wacom) int count = 0; int i; + if (!touch_max) + return 0; + /* non-HID_GENERIC single touch input doesn't call this routine */ if ((touch_max == 1) && (wacom->features.type == HID_GENERIC)) return wacom->hid_data.tipswitch && From e8fd5e9e9984675f45b9a5485909c143fbde248f Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Fri, 8 May 2015 14:32:56 +0200 Subject: [PATCH 167/337] kvm: fix crash in kvm_vcpu_reload_apic_access_page memslot->userfault_addr is set by the kernel with a mmap executed from the kernel but the userland can still munmap it and lead to the below oops after memslot->userfault_addr points to a host virtual address that has no vma or mapping. [ 327.538306] BUG: unable to handle kernel paging request at fffffffffffffffe [ 327.538407] IP: [] put_page+0x5/0x50 [ 327.538474] PGD 1a01067 PUD 1a03067 PMD 0 [ 327.538529] Oops: 0000 [#1] SMP [ 327.538574] Modules linked in: macvtap macvlan xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT iptable_filter ip_tables tun bridge stp llc rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache xprtrdma ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ipmi_devintf iTCO_wdt iTCO_vendor_support intel_powerclamp coretemp dcdbas intel_rapl kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd pcspkr sb_edac edac_core ipmi_si ipmi_msghandler acpi_pad wmi acpi_power_meter lpc_ich mfd_core mei_me [ 327.539488] mei shpchp nfsd auth_rpcgss nfs_acl lockd grace sunrpc mlx4_ib ib_sa ib_mad ib_core mlx4_en vxlan ib_addr ip_tunnel xfs libcrc32c sd_mod crc_t10dif crct10dif_common crc32c_intel mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm drm ahci i2c_core libahci mlx4_core libata tg3 ptp pps_core megaraid_sas ntb dm_mirror dm_region_hash dm_log dm_mod [ 327.539956] CPU: 3 PID: 3161 Comm: qemu-kvm Not tainted 3.10.0-240.el7.userfault19.4ca4011.x86_64.debug #1 [ 327.540045] Hardware name: Dell Inc. PowerEdge R420/0CN7CM, BIOS 2.1.2 01/20/2014 [ 327.540115] task: ffff8803280ccf00 ti: ffff880317c58000 task.ti: ffff880317c58000 [ 327.540184] RIP: 0010:[] [] put_page+0x5/0x50 [ 327.540261] RSP: 0018:ffff880317c5bcf8 EFLAGS: 00010246 [ 327.540313] RAX: 00057ffffffff000 RBX: ffff880616a20000 RCX: 0000000000000000 [ 327.540379] RDX: 0000000000002014 RSI: 00057ffffffff000 RDI: fffffffffffffffe [ 327.540445] RBP: ffff880317c5bd10 R08: 0000000000000103 R09: 0000000000000000 [ 327.540511] R10: 0000000000000000 R11: 0000000000000000 R12: fffffffffffffffe [ 327.540576] R13: 0000000000000000 R14: ffff880317c5bd70 R15: ffff880317c5bd50 [ 327.540643] FS: 00007fd230b7f700(0000) GS:ffff880630800000(0000) knlGS:0000000000000000 [ 327.540717] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 327.540771] CR2: fffffffffffffffe CR3: 000000062a2c3000 CR4: 00000000000427e0 [ 327.540837] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 327.540904] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 327.540974] Stack: [ 327.541008] ffffffffa05d6d0c ffff880616a20000 0000000000000000 ffff880317c5bdc0 [ 327.541093] ffffffffa05ddaa2 0000000000000000 00000000002191bf 00000042f3feab2d [ 327.541177] 00000042f3feab2d 0000000000000002 0000000000000001 0321000000000000 [ 327.541261] Call Trace: [ 327.541321] [] ? kvm_vcpu_reload_apic_access_page+0x6c/0x80 [kvm] [ 327.543615] [] vcpu_enter_guest+0x3f2/0x10f0 [kvm] [ 327.545918] [] kvm_arch_vcpu_ioctl_run+0x2b0/0x5a0 [kvm] [ 327.548211] [] ? kvm_arch_vcpu_ioctl_run+0xa2/0x5a0 [kvm] [ 327.550500] [] kvm_vcpu_ioctl+0x2b5/0x680 [kvm] [ 327.552768] [] ? creds_are_invalid.part.1+0x12/0x50 [ 327.555069] [] ? creds_are_invalid+0x21/0x30 [ 327.557373] [] ? inode_has_perm.isra.49.constprop.65+0x26/0x80 [ 327.559663] [] do_vfs_ioctl+0x305/0x530 [ 327.561917] [] SyS_ioctl+0xa1/0xc0 [ 327.564185] [] system_call_fastpath+0x16/0x1b [ 327.566480] Code: 0b 31 f6 4c 89 e7 e8 4b 7f ff ff 0f 0b e8 24 fd ff ff e9 a9 fd ff ff 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 <48> f7 07 00 c0 00 00 55 48 89 e5 75 2a 8b 47 1c 85 c0 74 1e f0 Signed-off-by: Andrea Arcangeli Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 986b3f5d0523..5f3818846465 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -6195,6 +6195,8 @@ void kvm_vcpu_reload_apic_access_page(struct kvm_vcpu *vcpu) return; page = gfn_to_page(vcpu->kvm, APIC_DEFAULT_PHYS_BASE >> PAGE_SHIFT); + if (is_error_page(page)) + return; kvm_x86_ops->set_apic_access_page_addr(vcpu, page_to_phys(page)); /* From 0fdd74f7784b5cdff7075736992bbb149b1ae49c Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 20 May 2015 11:33:43 +0200 Subject: [PATCH 168/337] Revert "KVM: x86: drop fpu_activate hook" This reverts commit 4473b570a7ebb502f63f292ccfba7df622e5fdd3. We'll use the hook again. Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- arch/x86/include/asm/kvm_host.h | 1 + arch/x86/kvm/svm.c | 1 + arch/x86/kvm/vmx.c | 1 + 3 files changed, 3 insertions(+) diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index e61c3a4ee131..5a1faf3f043e 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -744,6 +744,7 @@ struct kvm_x86_ops { void (*cache_reg)(struct kvm_vcpu *vcpu, enum kvm_reg reg); unsigned long (*get_rflags)(struct kvm_vcpu *vcpu); void (*set_rflags)(struct kvm_vcpu *vcpu, unsigned long rflags); + void (*fpu_activate)(struct kvm_vcpu *vcpu); void (*fpu_deactivate)(struct kvm_vcpu *vcpu); void (*tlb_flush)(struct kvm_vcpu *vcpu); diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index ce741b8650f6..9afa233b5482 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -4381,6 +4381,7 @@ static struct kvm_x86_ops svm_x86_ops = { .cache_reg = svm_cache_reg, .get_rflags = svm_get_rflags, .set_rflags = svm_set_rflags, + .fpu_activate = svm_fpu_activate, .fpu_deactivate = svm_fpu_deactivate, .tlb_flush = svm_flush_tlb, diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index f7b61687bd79..2d73807f0d31 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -10185,6 +10185,7 @@ static struct kvm_x86_ops vmx_x86_ops = { .cache_reg = vmx_cache_reg, .get_rflags = vmx_get_rflags, .set_rflags = vmx_set_rflags, + .fpu_activate = vmx_fpu_activate, .fpu_deactivate = vmx_fpu_deactivate, .tlb_flush = vmx_flush_tlb, From c447e76b4cabb49ddae8e49c5758f031f35d55fb Mon Sep 17 00:00:00 2001 From: Liang Li Date: Thu, 21 May 2015 04:41:25 +0800 Subject: [PATCH 169/337] kvm/fpu: Enable eager restore kvm FPU for MPX The MPX feature requires eager KVM FPU restore support. We have verified that MPX cannot work correctly with the current lazy KVM FPU restore mechanism. Eager KVM FPU restore should be enabled if the MPX feature is exposed to VM. Signed-off-by: Yang Zhang Signed-off-by: Liang Li [Also activate the FPU on AMD processors. - Paolo] Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- arch/x86/include/asm/kvm_host.h | 1 + arch/x86/kvm/cpuid.c | 4 ++++ arch/x86/kvm/cpuid.h | 8 ++++++++ arch/x86/kvm/x86.c | 16 ++++++++++++++-- 4 files changed, 27 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index 5a1faf3f043e..f4a555beef19 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -401,6 +401,7 @@ struct kvm_vcpu_arch { struct kvm_mmu_memory_cache mmu_page_header_cache; struct fpu guest_fpu; + bool eager_fpu; u64 xcr0; u64 guest_supported_xcr0; u32 guest_xstate_size; diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index 59b69f6a2844..1d08ad3582d0 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -16,6 +16,8 @@ #include #include #include +#include /* For use_eager_fpu. Ugh! */ +#include /* For use_eager_fpu. Ugh! */ #include #include #include "cpuid.h" @@ -95,6 +97,8 @@ int kvm_update_cpuid(struct kvm_vcpu *vcpu) if (best && (best->eax & (F(XSAVES) | F(XSAVEC)))) best->ebx = xstate_required_size(vcpu->arch.xcr0, true); + vcpu->arch.eager_fpu = guest_cpuid_has_mpx(vcpu); + /* * The existing code assumes virtual address is 48-bit in the canonical * address checks; exit if it is ever changed. diff --git a/arch/x86/kvm/cpuid.h b/arch/x86/kvm/cpuid.h index c3b1ad9fca81..496b3695d3d3 100644 --- a/arch/x86/kvm/cpuid.h +++ b/arch/x86/kvm/cpuid.h @@ -117,4 +117,12 @@ static inline bool guest_cpuid_has_rtm(struct kvm_vcpu *vcpu) best = kvm_find_cpuid_entry(vcpu, 7, 0); return best && (best->ebx & bit(X86_FEATURE_RTM)); } + +static inline bool guest_cpuid_has_mpx(struct kvm_vcpu *vcpu) +{ + struct kvm_cpuid_entry2 *best; + + best = kvm_find_cpuid_entry(vcpu, 7, 0); + return best && (best->ebx & bit(X86_FEATURE_MPX)); +} #endif diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 5f3818846465..ea306adbbc13 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -7060,7 +7060,9 @@ void kvm_put_guest_fpu(struct kvm_vcpu *vcpu) fpu_save_init(&vcpu->arch.guest_fpu); __kernel_fpu_end(); ++vcpu->stat.fpu_reload; - kvm_make_request(KVM_REQ_DEACTIVATE_FPU, vcpu); + if (!vcpu->arch.eager_fpu) + kvm_make_request(KVM_REQ_DEACTIVATE_FPU, vcpu); + trace_kvm_fpu(0); } @@ -7076,11 +7078,21 @@ void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu) struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id) { + struct kvm_vcpu *vcpu; + if (check_tsc_unstable() && atomic_read(&kvm->online_vcpus) != 0) printk_once(KERN_WARNING "kvm: SMP vm created on host with unstable TSC; " "guest TSC will not be reliable\n"); - return kvm_x86_ops->vcpu_create(kvm, id); + + vcpu = kvm_x86_ops->vcpu_create(kvm, id); + + /* + * Activate fpu unconditionally in case the guest needs eager FPU. It will be + * deactivated soon if it doesn't. + */ + kvm_x86_ops->fpu_activate(vcpu); + return vcpu; } int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu) From 3bfe049807c240344b407e3cfb74544927359817 Mon Sep 17 00:00:00 2001 From: Francesco Ruggeri Date: Sun, 17 May 2015 14:30:31 -0700 Subject: [PATCH 170/337] netfilter: nfnetlink_{log,queue}: Register pernet in first place nfnetlink_{log,queue}_init() register the netlink callback nf*_rcv_nl_event before registering the pernet_subsys, but the callback relies on data structures allocated by pernet init functions. When nfnetlink_{log,queue} is loaded, if a netlink message is received after the netlink callback is registered but before the pernet_subsys is registered, the kernel will panic in the sequence nfulnl_rcv_nl_event nfnl_log_pernet net_generic BUG_ON(id == 0) where id is nfnl_log_net_id. The panic can be easily reproduced in 4.0.3 by: while true ;do modprobe nfnetlink_log ; rmmod nfnetlink_log ; done & while true ;do ip netns add dummy ; ip netns del dummy ; done & This patch moves register_pernet_subsys to earlier in nfnetlink_log_init. Notice that the BUG_ON hit in 4.0.3 was recently removed in 2591ffd308 ["netns: remove BUG_ONs from net_generic()"]. Signed-off-by: Francesco Ruggeri Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nfnetlink_log.c | 19 ++++++++++--------- net/netfilter/nfnetlink_queue_core.c | 18 +++++++++--------- 2 files changed, 19 insertions(+), 18 deletions(-) diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c index 3ad91266c821..4ef1fae8445e 100644 --- a/net/netfilter/nfnetlink_log.c +++ b/net/netfilter/nfnetlink_log.c @@ -1073,7 +1073,13 @@ static struct pernet_operations nfnl_log_net_ops = { static int __init nfnetlink_log_init(void) { - int status = -ENOMEM; + int status; + + status = register_pernet_subsys(&nfnl_log_net_ops); + if (status < 0) { + pr_err("failed to register pernet ops\n"); + goto out; + } netlink_register_notifier(&nfulnl_rtnl_notifier); status = nfnetlink_subsys_register(&nfulnl_subsys); @@ -1088,28 +1094,23 @@ static int __init nfnetlink_log_init(void) goto cleanup_subsys; } - status = register_pernet_subsys(&nfnl_log_net_ops); - if (status < 0) { - pr_err("failed to register pernet ops\n"); - goto cleanup_logger; - } return status; -cleanup_logger: - nf_log_unregister(&nfulnl_logger); cleanup_subsys: nfnetlink_subsys_unregister(&nfulnl_subsys); cleanup_netlink_notifier: netlink_unregister_notifier(&nfulnl_rtnl_notifier); + unregister_pernet_subsys(&nfnl_log_net_ops); +out: return status; } static void __exit nfnetlink_log_fini(void) { - unregister_pernet_subsys(&nfnl_log_net_ops); nf_log_unregister(&nfulnl_logger); nfnetlink_subsys_unregister(&nfulnl_subsys); netlink_unregister_notifier(&nfulnl_rtnl_notifier); + unregister_pernet_subsys(&nfnl_log_net_ops); } MODULE_DESCRIPTION("netfilter userspace logging"); diff --git a/net/netfilter/nfnetlink_queue_core.c b/net/netfilter/nfnetlink_queue_core.c index 0b98c7420239..11c7682fa0ea 100644 --- a/net/netfilter/nfnetlink_queue_core.c +++ b/net/netfilter/nfnetlink_queue_core.c @@ -1317,7 +1317,13 @@ static struct pernet_operations nfnl_queue_net_ops = { static int __init nfnetlink_queue_init(void) { - int status = -ENOMEM; + int status; + + status = register_pernet_subsys(&nfnl_queue_net_ops); + if (status < 0) { + pr_err("nf_queue: failed to register pernet ops\n"); + goto out; + } netlink_register_notifier(&nfqnl_rtnl_notifier); status = nfnetlink_subsys_register(&nfqnl_subsys); @@ -1326,19 +1332,13 @@ static int __init nfnetlink_queue_init(void) goto cleanup_netlink_notifier; } - status = register_pernet_subsys(&nfnl_queue_net_ops); - if (status < 0) { - pr_err("nf_queue: failed to register pernet ops\n"); - goto cleanup_subsys; - } register_netdevice_notifier(&nfqnl_dev_notifier); nf_register_queue_handler(&nfqh); return status; -cleanup_subsys: - nfnetlink_subsys_unregister(&nfqnl_subsys); cleanup_netlink_notifier: netlink_unregister_notifier(&nfqnl_rtnl_notifier); +out: return status; } @@ -1346,9 +1346,9 @@ static void __exit nfnetlink_queue_fini(void) { nf_unregister_queue_handler(); unregister_netdevice_notifier(&nfqnl_dev_notifier); - unregister_pernet_subsys(&nfnl_queue_net_ops); nfnetlink_subsys_unregister(&nfqnl_subsys); netlink_unregister_notifier(&nfqnl_rtnl_notifier); + unregister_pernet_subsys(&nfnl_queue_net_ops); rcu_barrier(); /* Wait for completion of call_rcu()'s */ } From 1086bbe97a074844188c6c988fa0b1a98c3ccbb9 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 19 May 2015 20:55:17 -0400 Subject: [PATCH 171/337] netfilter: ensure number of counters is >0 in do_replace() After improving setsockopt() coverage in trinity, I started triggering vmalloc failures pretty reliably from this code path: warn_alloc_failed+0xe9/0x140 __vmalloc_node_range+0x1be/0x270 vzalloc+0x4b/0x50 __do_replace+0x52/0x260 [ip_tables] do_ipt_set_ctl+0x15d/0x1d0 [ip_tables] nf_setsockopt+0x65/0x90 ip_setsockopt+0x61/0xa0 raw_setsockopt+0x16/0x60 sock_common_setsockopt+0x14/0x20 SyS_setsockopt+0x71/0xd0 It turns out we don't validate that the num_counters field in the struct we pass in from userspace is initialized. The same problem also exists in ebtables, arptables, ipv6, and the compat variants. Signed-off-by: Dave Jones Signed-off-by: Pablo Neira Ayuso --- net/bridge/netfilter/ebtables.c | 4 ++++ net/ipv4/netfilter/arp_tables.c | 6 ++++++ net/ipv4/netfilter/ip_tables.c | 6 ++++++ net/ipv6/netfilter/ip6_tables.c | 6 ++++++ 4 files changed, 22 insertions(+) diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c index 91180a7fc943..24c7c96bf5f8 100644 --- a/net/bridge/netfilter/ebtables.c +++ b/net/bridge/netfilter/ebtables.c @@ -1117,6 +1117,8 @@ static int do_replace(struct net *net, const void __user *user, return -ENOMEM; if (tmp.num_counters >= INT_MAX / sizeof(struct ebt_counter)) return -ENOMEM; + if (tmp.num_counters == 0) + return -EINVAL; tmp.name[sizeof(tmp.name) - 1] = 0; @@ -2159,6 +2161,8 @@ static int compat_copy_ebt_replace_from_user(struct ebt_replace *repl, return -ENOMEM; if (tmp.num_counters >= INT_MAX / sizeof(struct ebt_counter)) return -ENOMEM; + if (tmp.num_counters == 0) + return -EINVAL; memcpy(repl, &tmp, offsetof(struct ebt_replace, hook_entry)); diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c index 13bfe84bf3ca..a61200754f4b 100644 --- a/net/ipv4/netfilter/arp_tables.c +++ b/net/ipv4/netfilter/arp_tables.c @@ -1075,6 +1075,9 @@ static int do_replace(struct net *net, const void __user *user, /* overflow check */ if (tmp.num_counters >= INT_MAX / sizeof(struct xt_counters)) return -ENOMEM; + if (tmp.num_counters == 0) + return -EINVAL; + tmp.name[sizeof(tmp.name)-1] = 0; newinfo = xt_alloc_table_info(tmp.size); @@ -1499,6 +1502,9 @@ static int compat_do_replace(struct net *net, void __user *user, return -ENOMEM; if (tmp.num_counters >= INT_MAX / sizeof(struct xt_counters)) return -ENOMEM; + if (tmp.num_counters == 0) + return -EINVAL; + tmp.name[sizeof(tmp.name)-1] = 0; newinfo = xt_alloc_table_info(tmp.size); diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c index c69db7fa25ee..2d0e265fef6e 100644 --- a/net/ipv4/netfilter/ip_tables.c +++ b/net/ipv4/netfilter/ip_tables.c @@ -1262,6 +1262,9 @@ do_replace(struct net *net, const void __user *user, unsigned int len) /* overflow check */ if (tmp.num_counters >= INT_MAX / sizeof(struct xt_counters)) return -ENOMEM; + if (tmp.num_counters == 0) + return -EINVAL; + tmp.name[sizeof(tmp.name)-1] = 0; newinfo = xt_alloc_table_info(tmp.size); @@ -1809,6 +1812,9 @@ compat_do_replace(struct net *net, void __user *user, unsigned int len) return -ENOMEM; if (tmp.num_counters >= INT_MAX / sizeof(struct xt_counters)) return -ENOMEM; + if (tmp.num_counters == 0) + return -EINVAL; + tmp.name[sizeof(tmp.name)-1] = 0; newinfo = xt_alloc_table_info(tmp.size); diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c index 1a732a1d3c8e..62f5b0d0bc9b 100644 --- a/net/ipv6/netfilter/ip6_tables.c +++ b/net/ipv6/netfilter/ip6_tables.c @@ -1275,6 +1275,9 @@ do_replace(struct net *net, const void __user *user, unsigned int len) /* overflow check */ if (tmp.num_counters >= INT_MAX / sizeof(struct xt_counters)) return -ENOMEM; + if (tmp.num_counters == 0) + return -EINVAL; + tmp.name[sizeof(tmp.name)-1] = 0; newinfo = xt_alloc_table_info(tmp.size); @@ -1822,6 +1825,9 @@ compat_do_replace(struct net *net, void __user *user, unsigned int len) return -ENOMEM; if (tmp.num_counters >= INT_MAX / sizeof(struct xt_counters)) return -ENOMEM; + if (tmp.num_counters == 0) + return -EINVAL; + tmp.name[sizeof(tmp.name)-1] = 0; newinfo = xt_alloc_table_info(tmp.size); From faecbb45ebefb20260ad4a631e011e93c896cb73 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 20 May 2015 13:42:25 +0200 Subject: [PATCH 172/337] Revert "netfilter: bridge: query conntrack about skb dnat" This reverts commit c055d5b03bb4cb69d349d787c9787c0383abd8b2. There are two issues: 'dnat_took_place' made me think that this is related to -j DNAT/MASQUERADE. But thats only one part of the story. This is also relevant for SNAT when we undo snat translation in reverse/reply direction. Furthermore, I originally wanted to do this mainly to avoid storing ipv6 addresses once we make DNAT/REDIRECT work for ipv6 on bridges. However, I forgot about SNPT/DNPT which is stateless. So we can't escape storing address for ipv6 anyway. Might as well do it for ipv4 too. Reported-and-tested-by: Bernhard Thaler Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- include/linux/skbuff.h | 1 + net/bridge/br_netfilter.c | 27 +++++++++------------------ 2 files changed, 10 insertions(+), 18 deletions(-) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 66e374d62f64..f15154a879c7 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -176,6 +176,7 @@ struct nf_bridge_info { struct net_device *physindev; struct net_device *physoutdev; char neigh_header[8]; + __be32 ipv4_daddr; }; #endif diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c index ab55e2472beb..60ddfbeb47f5 100644 --- a/net/bridge/br_netfilter.c +++ b/net/bridge/br_netfilter.c @@ -37,10 +37,6 @@ #include #include -#if IS_ENABLED(CONFIG_NF_CONNTRACK) -#include -#endif - #include #include "br_private.h" #ifdef CONFIG_SYSCTL @@ -350,24 +346,15 @@ free_skb: return 0; } -static bool dnat_took_place(const struct sk_buff *skb) +static bool daddr_was_changed(const struct sk_buff *skb, + const struct nf_bridge_info *nf_bridge) { -#if IS_ENABLED(CONFIG_NF_CONNTRACK) - enum ip_conntrack_info ctinfo; - struct nf_conn *ct; - - ct = nf_ct_get(skb, &ctinfo); - if (!ct || nf_ct_is_untracked(ct)) - return false; - - return test_bit(IPS_DST_NAT_BIT, &ct->status); -#else - return false; -#endif + return ip_hdr(skb)->daddr != nf_bridge->ipv4_daddr; } /* This requires some explaining. If DNAT has taken place, * we will need to fix up the destination Ethernet address. + * This is also true when SNAT takes place (for the reply direction). * * There are two cases to consider: * 1. The packet was DNAT'ed to a device in the same bridge @@ -421,7 +408,7 @@ static int br_nf_pre_routing_finish(struct sock *sk, struct sk_buff *skb) nf_bridge->pkt_otherhost = false; } nf_bridge->mask ^= BRNF_NF_BRIDGE_PREROUTING; - if (dnat_took_place(skb)) { + if (daddr_was_changed(skb, nf_bridge)) { if ((err = ip_route_input(skb, iph->daddr, iph->saddr, iph->tos, dev))) { struct in_device *in_dev = __in_dev_get_rcu(dev); @@ -632,6 +619,7 @@ static unsigned int br_nf_pre_routing(const struct nf_hook_ops *ops, struct sk_buff *skb, const struct nf_hook_state *state) { + struct nf_bridge_info *nf_bridge; struct net_bridge_port *p; struct net_bridge *br; __u32 len = nf_bridge_encap_header_len(skb); @@ -669,6 +657,9 @@ static unsigned int br_nf_pre_routing(const struct nf_hook_ops *ops, if (!setup_pre_routing(skb)) return NF_DROP; + nf_bridge = nf_bridge_info_get(skb); + nf_bridge->ipv4_daddr = ip_hdr(skb)->daddr; + skb->protocol = htons(ETH_P_IP); NF_HOOK(NFPROTO_IPV4, NF_INET_PRE_ROUTING, state->sk, skb, From 252ec2b3aa6f6a9ac29c6539027db600c11bf45e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 19 May 2015 13:36:38 +0200 Subject: [PATCH 173/337] mac80211: don't split remain-on-channel for coalescing Due to remain-on-channel scheduling delays, when we split an ROC while coalescing, we'll usually get a picture like this: existing ROC: |------------------| current time: ^ new ROC: |------| |-------| If the expected response frames are then transmitted by the peer in the hole between the two fragments of the new ROC, we miss them and the process (e.g. ANQP query) fails. mac80211 expects that the window to miss something is small: existing ROC: |------------------| new ROC: |------||-------| but that's normally not the case. To avoid this problem, coalesce only if the new ROC's duration is <= the remaining time on the existing one: existing ROC: |------------------| new ROC: |-----| and never split a new one but schedule it afterwards instead: existing ROC: |------------------| new ROC: |-------------| type=bugfix bug=not-tracked fixes=unknown Reported-by: Matti Gottlieb Reviewed-by: EliadX Peller Reviewed-by: Matti Gottlieb Tested-by: Matti Gottlieb Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 59 +++++++------------------------------- net/mac80211/ieee80211_i.h | 6 ---- 2 files changed, 11 insertions(+), 54 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 265e42721a66..ff347a0eebd4 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2495,51 +2495,22 @@ static bool ieee80211_coalesce_started_roc(struct ieee80211_local *local, struct ieee80211_roc_work *new_roc, struct ieee80211_roc_work *cur_roc) { - unsigned long j = jiffies; - unsigned long cur_roc_end = cur_roc->hw_start_time + - msecs_to_jiffies(cur_roc->duration); - struct ieee80211_roc_work *next_roc; - int new_dur; + unsigned long now = jiffies; + unsigned long remaining = cur_roc->hw_start_time + + msecs_to_jiffies(cur_roc->duration) - + now; if (WARN_ON(!cur_roc->started || !cur_roc->hw_begun)) return false; - if (time_after(j + IEEE80211_ROC_MIN_LEFT, cur_roc_end)) + /* if it doesn't fit entirely, schedule a new one */ + if (new_roc->duration > jiffies_to_msecs(remaining)) return false; ieee80211_handle_roc_started(new_roc); - new_dur = new_roc->duration - jiffies_to_msecs(cur_roc_end - j); - - /* cur_roc is long enough - add new_roc to the dependents list. */ - if (new_dur <= 0) { - list_add_tail(&new_roc->list, &cur_roc->dependents); - return true; - } - - new_roc->duration = new_dur; - - /* - * if cur_roc was already coalesced before, we might - * want to extend the next roc instead of adding - * a new one. - */ - next_roc = list_entry(cur_roc->list.next, - struct ieee80211_roc_work, list); - if (&next_roc->list != &local->roc_list && - next_roc->chan == new_roc->chan && - next_roc->sdata == new_roc->sdata && - !WARN_ON(next_roc->started)) { - list_add_tail(&new_roc->list, &next_roc->dependents); - next_roc->duration = max(next_roc->duration, - new_roc->duration); - next_roc->type = max(next_roc->type, new_roc->type); - return true; - } - - /* add right after cur_roc */ - list_add(&new_roc->list, &cur_roc->list); - + /* add to dependents so we send the expired event properly */ + list_add_tail(&new_roc->list, &cur_roc->dependents); return true; } @@ -2652,17 +2623,9 @@ static int ieee80211_start_roc_work(struct ieee80211_local *local, * In the offloaded ROC case, if it hasn't begun, add * this new one to the dependent list to be handled * when the master one begins. If it has begun, - * check that there's still a minimum time left and - * if so, start this one, transmitting the frame, but - * add it to the list directly after this one with - * a reduced time so we'll ask the driver to execute - * it right after finishing the previous one, in the - * hope that it'll also be executed right afterwards, - * effectively extending the old one. - * If there's no minimum time left, just add it to the - * normal list. - * TODO: the ROC type is ignored here, assuming that it - * is better to immediately use the current ROC. + * check if it fits entirely within the existing one, + * in which case it will just be dependent as well. + * Otherwise, schedule it by itself. */ if (!tmp->hw_begun) { list_add_tail(&roc->list, &tmp->dependents); diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index cdc374296245..c0a9187bc3a9 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -328,12 +328,6 @@ struct mesh_preq_queue { u8 flags; }; -#if HZ/100 == 0 -#define IEEE80211_ROC_MIN_LEFT 1 -#else -#define IEEE80211_ROC_MIN_LEFT (HZ/100) -#endif - struct ieee80211_roc_work { struct list_head list; struct list_head dependents; From f9dca80b98caac8b4bfb43a2edf1e9f877ccf322 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Wed, 13 May 2015 09:16:48 +0000 Subject: [PATCH 174/337] mac80211: fix AP_VLAN crypto tailroom calculation Some splats I was seeing: (a) WARNING: CPU: 1 PID: 0 at /devel/src/linux/net/mac80211/wep.c:102 ieee80211_wep_add_iv (b) WARNING: CPU: 1 PID: 0 at /devel/src/linux/net/mac80211/wpa.c:73 ieee80211_tx_h_michael_mic_add (c) WARNING: CPU: 3 PID: 0 at /devel/src/linux/net/mac80211/wpa.c:433 ieee80211_crypto_ccmp_encrypt I've seen (a) and (b) with ath9k hw crypto and (c) with ath9k sw crypto. All of them were related to insufficient skb tailroom and I was able to trigger these with ping6 program. AP_VLANs may inherit crypto keys from parent AP. This wasn't considered and yielded problems in some setups resulting in inability to transmit data because mac80211 wouldn't resize skbs when necessary and subsequently drop some packets due to insufficient tailroom. For efficiency purposes don't inspect both AP_VLAN and AP sdata looking for tailroom counter. Instead update AP_VLAN tailroom counters whenever their master AP tailroom counter changes. Signed-off-by: Michal Kazior Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 6 ++++ net/mac80211/key.c | 82 +++++++++++++++++++++++++++++++++++++++----- net/mac80211/key.h | 1 + net/mac80211/util.c | 3 ++ 4 files changed, 83 insertions(+), 9 deletions(-) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index bab5c63c0bad..84cef600c573 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -522,6 +522,12 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up) memcpy(sdata->vif.hw_queue, master->vif.hw_queue, sizeof(sdata->vif.hw_queue)); sdata->vif.bss_conf.chandef = master->vif.bss_conf.chandef; + + mutex_lock(&local->key_mtx); + sdata->crypto_tx_tailroom_needed_cnt += + master->crypto_tx_tailroom_needed_cnt; + mutex_unlock(&local->key_mtx); + break; } case NL80211_IFTYPE_AP: diff --git a/net/mac80211/key.c b/net/mac80211/key.c index 2291cd730091..a907f2d5c12d 100644 --- a/net/mac80211/key.c +++ b/net/mac80211/key.c @@ -58,6 +58,22 @@ static void assert_key_lock(struct ieee80211_local *local) lockdep_assert_held(&local->key_mtx); } +static void +update_vlan_tailroom_need_count(struct ieee80211_sub_if_data *sdata, int delta) +{ + struct ieee80211_sub_if_data *vlan; + + if (sdata->vif.type != NL80211_IFTYPE_AP) + return; + + mutex_lock(&sdata->local->mtx); + + list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) + vlan->crypto_tx_tailroom_needed_cnt += delta; + + mutex_unlock(&sdata->local->mtx); +} + static void increment_tailroom_need_count(struct ieee80211_sub_if_data *sdata) { /* @@ -79,6 +95,8 @@ static void increment_tailroom_need_count(struct ieee80211_sub_if_data *sdata) * http://mid.gmane.org/1308590980.4322.19.camel@jlt3.sipsolutions.net */ + update_vlan_tailroom_need_count(sdata, 1); + if (!sdata->crypto_tx_tailroom_needed_cnt++) { /* * Flush all XMIT packets currently using HW encryption or no @@ -88,6 +106,15 @@ static void increment_tailroom_need_count(struct ieee80211_sub_if_data *sdata) } } +static void decrease_tailroom_need_count(struct ieee80211_sub_if_data *sdata, + int delta) +{ + WARN_ON_ONCE(sdata->crypto_tx_tailroom_needed_cnt < delta); + + update_vlan_tailroom_need_count(sdata, -delta); + sdata->crypto_tx_tailroom_needed_cnt -= delta; +} + static int ieee80211_key_enable_hw_accel(struct ieee80211_key *key) { struct ieee80211_sub_if_data *sdata; @@ -144,7 +171,7 @@ static int ieee80211_key_enable_hw_accel(struct ieee80211_key *key) if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) || (key->conf.flags & IEEE80211_KEY_FLAG_RESERVE_TAILROOM))) - sdata->crypto_tx_tailroom_needed_cnt--; + decrease_tailroom_need_count(sdata, 1); WARN_ON((key->conf.flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE) && (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)); @@ -541,7 +568,7 @@ static void __ieee80211_key_destroy(struct ieee80211_key *key, schedule_delayed_work(&sdata->dec_tailroom_needed_wk, HZ/2); } else { - sdata->crypto_tx_tailroom_needed_cnt--; + decrease_tailroom_need_count(sdata, 1); } } @@ -631,6 +658,7 @@ void ieee80211_key_free(struct ieee80211_key *key, bool delay_tailroom) void ieee80211_enable_keys(struct ieee80211_sub_if_data *sdata) { struct ieee80211_key *key; + struct ieee80211_sub_if_data *vlan; ASSERT_RTNL(); @@ -639,7 +667,14 @@ void ieee80211_enable_keys(struct ieee80211_sub_if_data *sdata) mutex_lock(&sdata->local->key_mtx); - sdata->crypto_tx_tailroom_needed_cnt = 0; + WARN_ON_ONCE(sdata->crypto_tx_tailroom_needed_cnt || + sdata->crypto_tx_tailroom_pending_dec); + + if (sdata->vif.type == NL80211_IFTYPE_AP) { + list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) + WARN_ON_ONCE(vlan->crypto_tx_tailroom_needed_cnt || + vlan->crypto_tx_tailroom_pending_dec); + } list_for_each_entry(key, &sdata->key_list, list) { increment_tailroom_need_count(sdata); @@ -649,6 +684,22 @@ void ieee80211_enable_keys(struct ieee80211_sub_if_data *sdata) mutex_unlock(&sdata->local->key_mtx); } +void ieee80211_reset_crypto_tx_tailroom(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_sub_if_data *vlan; + + mutex_lock(&sdata->local->key_mtx); + + sdata->crypto_tx_tailroom_needed_cnt = 0; + + if (sdata->vif.type == NL80211_IFTYPE_AP) { + list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) + vlan->crypto_tx_tailroom_needed_cnt = 0; + } + + mutex_unlock(&sdata->local->key_mtx); +} + void ieee80211_iter_keys(struct ieee80211_hw *hw, struct ieee80211_vif *vif, void (*iter)(struct ieee80211_hw *hw, @@ -688,8 +739,8 @@ static void ieee80211_free_keys_iface(struct ieee80211_sub_if_data *sdata, { struct ieee80211_key *key, *tmp; - sdata->crypto_tx_tailroom_needed_cnt -= - sdata->crypto_tx_tailroom_pending_dec; + decrease_tailroom_need_count(sdata, + sdata->crypto_tx_tailroom_pending_dec); sdata->crypto_tx_tailroom_pending_dec = 0; ieee80211_debugfs_key_remove_mgmt_default(sdata); @@ -709,6 +760,7 @@ void ieee80211_free_keys(struct ieee80211_sub_if_data *sdata, { struct ieee80211_local *local = sdata->local; struct ieee80211_sub_if_data *vlan; + struct ieee80211_sub_if_data *master; struct ieee80211_key *key, *tmp; LIST_HEAD(keys); @@ -728,8 +780,20 @@ void ieee80211_free_keys(struct ieee80211_sub_if_data *sdata, list_for_each_entry_safe(key, tmp, &keys, list) __ieee80211_key_destroy(key, false); - WARN_ON_ONCE(sdata->crypto_tx_tailroom_needed_cnt || - sdata->crypto_tx_tailroom_pending_dec); + if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { + if (sdata->bss) { + master = container_of(sdata->bss, + struct ieee80211_sub_if_data, + u.ap); + + WARN_ON_ONCE(sdata->crypto_tx_tailroom_needed_cnt != + master->crypto_tx_tailroom_needed_cnt); + } + } else { + WARN_ON_ONCE(sdata->crypto_tx_tailroom_needed_cnt || + sdata->crypto_tx_tailroom_pending_dec); + } + if (sdata->vif.type == NL80211_IFTYPE_AP) { list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) WARN_ON_ONCE(vlan->crypto_tx_tailroom_needed_cnt || @@ -793,8 +857,8 @@ void ieee80211_delayed_tailroom_dec(struct work_struct *wk) */ mutex_lock(&sdata->local->key_mtx); - sdata->crypto_tx_tailroom_needed_cnt -= - sdata->crypto_tx_tailroom_pending_dec; + decrease_tailroom_need_count(sdata, + sdata->crypto_tx_tailroom_pending_dec); sdata->crypto_tx_tailroom_pending_dec = 0; mutex_unlock(&sdata->local->key_mtx); } diff --git a/net/mac80211/key.h b/net/mac80211/key.h index c5a31835be0e..96557dd1e77d 100644 --- a/net/mac80211/key.h +++ b/net/mac80211/key.h @@ -161,6 +161,7 @@ void ieee80211_free_keys(struct ieee80211_sub_if_data *sdata, void ieee80211_free_sta_keys(struct ieee80211_local *local, struct sta_info *sta); void ieee80211_enable_keys(struct ieee80211_sub_if_data *sdata); +void ieee80211_reset_crypto_tx_tailroom(struct ieee80211_sub_if_data *sdata); #define key_mtx_dereference(local, ref) \ rcu_dereference_protected(ref, lockdep_is_held(&((local)->key_mtx))) diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 79412f16b61d..b864ebc6ab8f 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -2022,6 +2022,9 @@ int ieee80211_reconfig(struct ieee80211_local *local) mutex_unlock(&local->sta_mtx); /* add back keys */ + list_for_each_entry(sdata, &local->interfaces, list) + ieee80211_reset_crypto_tx_tailroom(sdata); + list_for_each_entry(sdata, &local->interfaces, list) if (ieee80211_sdata_running(sdata)) ieee80211_enable_keys(sdata); From c411ead995b46f361b92116fd042ae83866044a1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Wed, 13 May 2015 07:36:38 +0200 Subject: [PATCH 175/337] ssb: extend fix for PCI related silent reboots to all chipsets MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Recent fix for BCM4704 reboots has to be extended as the same problem affects Linksys WRT350N v1 (BCM4705). Signed-off-by: Rafał Miłecki Reported-by: Daniel Gimpelevich Signed-off-by: Kalle Valo --- drivers/ssb/driver_pcicore.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index 15a7ee3859dd..5fe1c22e289b 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -359,12 +359,13 @@ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc) /* * Accessing PCI config without a proper delay after devices reset (not - * GPIO reset) was causing reboots on WRT300N v1.0. + * GPIO reset) was causing reboots on WRT300N v1.0 (BCM4704). * Tested delay 850 us lowered reboot chance to 50-80%, 1000 us fixed it * completely. Flushing all writes was also tested but with no luck. + * The same problem was reported for WRT350N v1 (BCM4705), so we just + * sleep here unconditionally. */ - if (pc->dev->bus->chip_id == 0x4704) - usleep_range(1000, 2000); + usleep_range(1000, 2000); /* Enable PCI bridge BAR0 prefetch and burst */ val = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; From 1dc92c450a53f120b67296cb4b29c1dfdc665ac1 Mon Sep 17 00:00:00 2001 From: Steve French Date: Wed, 20 May 2015 09:32:21 -0500 Subject: [PATCH 176/337] [cifs] fix null pointer check Dan Carpenter pointed out an inconsistent null pointer check in smb2_hdr_assemble that was pointed out by static checker. Signed-off-by: Steve French Reviewed-by: Sachin Prabhu CC: Dan Carpenter w --- fs/cifs/smb2pdu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index 65cd7a84c8bc..54cbe19d9c08 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -110,7 +110,7 @@ smb2_hdr_assemble(struct smb2_hdr *hdr, __le16 smb2_cmd /* command */ , /* GLOBAL_CAP_LARGE_MTU will only be set if dialect > SMB2.02 */ /* See sections 2.2.4 and 3.2.4.1.5 of MS-SMB2 */ - if ((tcon->ses) && + if ((tcon->ses) && (tcon->ses->server) && (tcon->ses->server->capabilities & SMB2_GLOBAL_CAP_LARGE_MTU)) hdr->CreditCharge = cpu_to_le16(1); /* else CreditCharge MBZ */ From 35f1b4e96b9258a3668872b1139c51e5a23eb876 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michal=20Kube=C4=8Dek?= Date: Mon, 18 May 2015 20:53:55 +0200 Subject: [PATCH 177/337] ipv6: do not delete previously existing ECMP routes if add fails If adding a nexthop of an IPv6 multipath route fails, comment in ip6_route_multipath() says we are going to delete all nexthops already added. However, current implementation deletes even the routes it hasn't even tried to add yet. For example, running ip route add 1234:5678::/64 \ nexthop via fe80::aa dev dummy1 \ nexthop via fe80::bb dev dummy1 \ nexthop via fe80::cc dev dummy1 twice results in removing all routes first command added. Limit the second (delete) run to nexthops that succeeded in the first (add) run. Fixes: 51ebd3181572 ("ipv6: add support of equal cost multipath (ECMP)") Signed-off-by: Michal Kubecek Acked-by: Nicolas Dichtel Signed-off-by: David S. Miller --- net/ipv6/route.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index d3588885f097..3821a3517478 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -2504,9 +2504,9 @@ static int ip6_route_multipath(struct fib6_config *cfg, int add) int attrlen; int err = 0, last_err = 0; + remaining = cfg->fc_mp_len; beginning: rtnh = (struct rtnexthop *)cfg->fc_mp; - remaining = cfg->fc_mp_len; /* Parse a Multipath Entry */ while (rtnh_ok(rtnh, remaining)) { @@ -2536,6 +2536,7 @@ beginning: * next hops that have been already added. */ add = 0; + remaining = cfg->fc_mp_len - remaining; goto beginning; } } From 27596472473a02cfef2908a6bcda7e55264ba6b7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michal=20Kube=C4=8Dek?= Date: Mon, 18 May 2015 20:54:00 +0200 Subject: [PATCH 178/337] ipv6: fix ECMP route replacement When replacing an IPv6 multipath route with "ip route replace", i.e. NLM_F_CREATE | NLM_F_REPLACE, fib6_add_rt2node() replaces only first matching route without fixing its siblings, resulting in corrupted siblings linked list; removing one of the siblings can then end in an infinite loop. IPv6 ECMP implementation is a bit different from IPv4 so that route replacement cannot work in exactly the same way. This should be a reasonable approximation: 1. If the new route is ECMP-able and there is a matching ECMP-able one already, replace it and all its siblings (if any). 2. If the new route is ECMP-able and no matching ECMP-able route exists, replace first matching non-ECMP-able (if any) or just add the new one. 3. If the new route is not ECMP-able, replace first matching non-ECMP-able route (if any) or add the new route. We also need to remove the NLM_F_REPLACE flag after replacing old route(s) by first nexthop of an ECMP route so that each subsequent nexthop does not replace previous one. Fixes: 51ebd3181572 ("ipv6: add support of equal cost multipath (ECMP)") Signed-off-by: Michal Kubecek Acked-by: Nicolas Dichtel Signed-off-by: David S. Miller --- net/ipv6/ip6_fib.c | 39 +++++++++++++++++++++++++++++++++++++-- net/ipv6/route.c | 11 +++++++---- 2 files changed, 44 insertions(+), 6 deletions(-) diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c index 96dbffff5a24..bde57b113009 100644 --- a/net/ipv6/ip6_fib.c +++ b/net/ipv6/ip6_fib.c @@ -693,6 +693,7 @@ static int fib6_add_rt2node(struct fib6_node *fn, struct rt6_info *rt, { struct rt6_info *iter = NULL; struct rt6_info **ins; + struct rt6_info **fallback_ins = NULL; int replace = (info->nlh && (info->nlh->nlmsg_flags & NLM_F_REPLACE)); int add = (!info->nlh || @@ -716,8 +717,13 @@ static int fib6_add_rt2node(struct fib6_node *fn, struct rt6_info *rt, (info->nlh->nlmsg_flags & NLM_F_EXCL)) return -EEXIST; if (replace) { - found++; - break; + if (rt_can_ecmp == rt6_qualify_for_ecmp(iter)) { + found++; + break; + } + if (rt_can_ecmp) + fallback_ins = fallback_ins ?: ins; + goto next_iter; } if (iter->dst.dev == rt->dst.dev && @@ -753,9 +759,17 @@ static int fib6_add_rt2node(struct fib6_node *fn, struct rt6_info *rt, if (iter->rt6i_metric > rt->rt6i_metric) break; +next_iter: ins = &iter->dst.rt6_next; } + if (fallback_ins && !found) { + /* No ECMP-able route found, replace first non-ECMP one */ + ins = fallback_ins; + iter = *ins; + found++; + } + /* Reset round-robin state, if necessary */ if (ins == &fn->leaf) fn->rr_ptr = NULL; @@ -815,6 +829,8 @@ add: } } else { + int nsiblings; + if (!found) { if (add) goto add; @@ -835,8 +851,27 @@ add: info->nl_net->ipv6.rt6_stats->fib_route_nodes++; fn->fn_flags |= RTN_RTINFO; } + nsiblings = iter->rt6i_nsiblings; fib6_purge_rt(iter, fn, info->nl_net); rt6_release(iter); + + if (nsiblings) { + /* Replacing an ECMP route, remove all siblings */ + ins = &rt->dst.rt6_next; + iter = *ins; + while (iter) { + if (rt6_qualify_for_ecmp(iter)) { + *ins = iter->dst.rt6_next; + fib6_purge_rt(iter, fn, info->nl_net); + rt6_release(iter); + nsiblings--; + } else { + ins = &iter->dst.rt6_next; + } + iter = *ins; + } + WARN_ON(nsiblings != 0); + } } return 0; diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 3821a3517478..c73ae5039e46 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -2541,11 +2541,14 @@ beginning: } } /* Because each route is added like a single route we remove - * this flag after the first nexthop (if there is a collision, - * we have already fail to add the first nexthop: - * fib6_add_rt2node() has reject it). + * these flags after the first nexthop: if there is a collision, + * we have already failed to add the first nexthop: + * fib6_add_rt2node() has rejected it; when replacing, old + * nexthops have been replaced by first new, the rest should + * be added to it. */ - cfg->fc_nlinfo.nlh->nlmsg_flags &= ~NLM_F_EXCL; + cfg->fc_nlinfo.nlh->nlmsg_flags &= ~(NLM_F_EXCL | + NLM_F_REPLACE); rtnh = rtnh_next(rtnh, &remaining); } From c15e10e71ce3b4ee78d85d80102a9621cde1edbd Mon Sep 17 00:00:00 2001 From: Tim Beale Date: Mon, 18 May 2015 15:38:38 +1200 Subject: [PATCH 179/337] net: phy: Make sure phy_start() always re-enables the phy interrupts This is an alternative way of fixing: commit db9683fb412d ("net: phy: Make sure PHY_RESUMING state change is always processed") When the PHY state transitions from PHY_HALTED to PHY_RESUMING, there are two things we need to do: 1). Re-enable interrupts (and power up the physical link, if powered down) 2). Update the PHY state and net-device based on the link status. There's no strict reason why #1 has to be done from within the main phy_state_machine() function. There is a risk that other changes to the PHY (e.g. setting speed/duplex, which calls phy_start_aneg()) could cause a subsequent state transition before phy_state_machine() has processed the PHY_RESUMING state change. This would leave the PHY with interrupts disabled and/or still in the BMCR_PDOWN/low-power mode. Moving enabling the interrupts and phy_resume() into phy_start() will guarantee this work always gets done. As the PHY is already in the HALTED state and interrupts are disabled, it shouldn't conflict with any work being done in phy_state_machine(). The downside of this change is that if the PHY_RESUMING state is ever entered from anywhere else, it'll also have to repeat this work. Signed-off-by: Tim Beale Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 29 ++++++++++++++++------------- 1 file changed, 16 insertions(+), 13 deletions(-) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 710696d1af97..47cd578052fc 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -465,7 +465,7 @@ int phy_start_aneg(struct phy_device *phydev) if (err < 0) goto out_unlock; - if (phydev->state != PHY_HALTED && phydev->state != PHY_RESUMING) { + if (phydev->state != PHY_HALTED) { if (AUTONEG_ENABLE == phydev->autoneg) { phydev->state = PHY_AN; phydev->link_timeout = PHY_AN_TIMEOUT; @@ -742,6 +742,9 @@ EXPORT_SYMBOL(phy_stop); */ void phy_start(struct phy_device *phydev) { + bool do_resume = false; + int err = 0; + mutex_lock(&phydev->lock); switch (phydev->state) { @@ -752,11 +755,22 @@ void phy_start(struct phy_device *phydev) phydev->state = PHY_UP; break; case PHY_HALTED: + /* make sure interrupts are re-enabled for the PHY */ + err = phy_enable_interrupts(phydev); + if (err < 0) + break; + phydev->state = PHY_RESUMING; + do_resume = true; + break; default: break; } mutex_unlock(&phydev->lock); + + /* if phy was suspended, bring the physical link up again */ + if (do_resume) + phy_resume(phydev); } EXPORT_SYMBOL(phy_start); @@ -769,7 +783,7 @@ void phy_state_machine(struct work_struct *work) struct delayed_work *dwork = to_delayed_work(work); struct phy_device *phydev = container_of(dwork, struct phy_device, state_queue); - bool needs_aneg = false, do_suspend = false, do_resume = false; + bool needs_aneg = false, do_suspend = false; int err = 0; mutex_lock(&phydev->lock); @@ -888,14 +902,6 @@ void phy_state_machine(struct work_struct *work) } break; case PHY_RESUMING: - err = phy_clear_interrupt(phydev); - if (err) - break; - - err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); - if (err) - break; - if (AUTONEG_ENABLE == phydev->autoneg) { err = phy_aneg_done(phydev); if (err < 0) @@ -933,7 +939,6 @@ void phy_state_machine(struct work_struct *work) } phydev->adjust_link(phydev->attached_dev); } - do_resume = true; break; } @@ -943,8 +948,6 @@ void phy_state_machine(struct work_struct *work) err = phy_start_aneg(phydev); else if (do_suspend) phy_suspend(phydev); - else if (do_resume) - phy_resume(phydev); if (err < 0) phy_error(phydev); From 65c3b205ebe06a389a29544e71a8071da0ce4155 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 30 Apr 2015 17:30:24 +0300 Subject: [PATCH 180/337] CIFS: remove an unneeded NULL check Smatch complains because we dereference "ses->server" without checking some lines earlier inside the call to get_next_mid(ses->server). fs/cifs/cifssmb.c:4921 CIFSGetDFSRefer() warn: variable dereferenced before check 'ses->server' (see line 4899) There is only one caller for this function get_dfs_path() and it always passes a non-null "ses->server" pointer so this NULL check can be removed. Signed-off-by: Dan Carpenter Signed-off-by: Steve French --- fs/cifs/cifssmb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 1091affba425..f26ffbfc64d8 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -4918,7 +4918,7 @@ getDFSRetry: strncpy(pSMB->RequestFileName, search_name, name_len); } - if (ses->server && ses->server->sign) + if (ses->server->sign) pSMB->hdr.Flags2 |= SMBFLG2_SECURITY_SIGNATURE; pSMB->hdr.Uid = ses->Suid; From c29ed5a4566fc7e0c5d06324d62974c6163d1e06 Mon Sep 17 00:00:00 2001 From: Ted Kim Date: Thu, 14 May 2015 12:49:01 -0700 Subject: [PATCH 181/337] ib/cm: Change reject message type when destroying cm_id Problem reported by: Ted Kim : We have a case where a Linux system and a non-Linux system are trying to interoperate. The Linux host is the active side and starts the connection establishment, but later decides to not go through with the connection setup and does rdma_destroy_id(). The rdma_destroy_id() eventually works its way down to cm_destroy_id() in core/cm.c, where a REJ is sent. The non-Linux system has some trouble recognizing the REJ because of: A. CM states which can't receive the REJ B. Some issues about REJ formatting (missing comm ID) ISSUE A: That part of the spec says, a Consumer Reject REJ can be sent for a connection abort, but it goes further and says: can send a REJ message with a "Consumer Reject" Reason code if they are in a CM state (i.e. REP Rcvd, MRA(REP) Sent, REQ Rcvd, MRA Sent) that allows a REJ to be sent (lines 35-38). Of the states listed there in that sentence, it would seem to limit the active side to using the Consumer Reject (for the abort case) in just the REP-Rcvd and MRA-REP-Sent states. That is basically only after the active side sees a REP (or alternatively goes down the state transitions to timeout in which case a Timeout REJ is sent). As a fix, in cm-destroy-id() move the IB-CM-MRA-REQ-RCVD case to the same as REQ-SENT. Essentially, make a REJ sent after getting an MRA on active side a timeout rather than Consumer- Reject, which is arguably more correct with the CM state diagrams previous to getting a REP. Signed-off-by: Ted Kim Signed-off-by: Sean Hefty --- drivers/infiniband/core/cm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index 0c1419105ff0..0271608a51c4 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -861,6 +861,7 @@ retest: cm_reject_sidr_req(cm_id_priv, IB_SIDR_REJECT); break; case IB_CM_REQ_SENT: + case IB_CM_MRA_REQ_RCVD: ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); spin_unlock_irq(&cm_id_priv->lock); ib_send_cm_rej(cm_id, IB_CM_REJ_TIMEOUT, @@ -879,7 +880,6 @@ retest: NULL, 0, NULL, 0); } break; - case IB_CM_MRA_REQ_RCVD: case IB_CM_REP_SENT: case IB_CM_MRA_REP_RCVD: ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); From 3d76be5b933e2a66d85a2f7444e68e99e8a48ad4 Mon Sep 17 00:00:00 2001 From: Robert Nelson Date: Wed, 20 May 2015 10:00:10 -0700 Subject: [PATCH 182/337] ARM: dts: am335x-boneblack: disable RTC-only sleep Fixes: http://bugs.elinux.org/issues/143 Entering RTC-only sleep is only properly supported on early prototypes series (pre-A6) of the BeagleBone Black. Since rev (A6A), which include all production versions, it is not support at due to. (rev A6) enable of the 3v3b regulator moved from LDO2 to LDO4 (3v3a) side-effect: 3v3b rail remains on in sleep-mode (also in off-mode when battery-powered) (rev A6A) am335x vdds supply moved from LDO3 to LDO1 side-effect: vdds remains supplied in sleep-mode Reported-by: Matthijs van Duin Tested-by: Matthijs van Duin Signed-off-by: Robert Nelson Cc: Tony Lindgren Cc: Felipe Balbi Cc: Johan Hovold Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-boneblack.dts | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 5c42d259fa68..901739fcb85a 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -80,7 +80,3 @@ status = "okay"; }; }; - -&rtc { - system-power-controller; -}; From ed38c6573b2ef34b3629989f7b6ac5894a010403 Mon Sep 17 00:00:00 2001 From: Anthoine Bourgeois Date: Wed, 20 May 2015 10:00:10 -0700 Subject: [PATCH 183/337] ARM: dts: omap3-devkit8000: Fix NAND DT node Add nand-ecc-opt and device-width properties to enable nand support on Devkit8000. Signed-off-by: Anthoine Bourgeois Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-devkit8000.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index 134d3f27a8ec..921de6605f07 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -110,6 +110,8 @@ nand@0,0 { reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; + gpmc,device-width = <2>; + ti,nand-ecc-opt = "sw"; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; From f25bf74c8862efdc30453d16d60cf22958a4873e Mon Sep 17 00:00:00 2001 From: Romain Izard Date: Wed, 20 May 2015 10:00:10 -0700 Subject: [PATCH 184/337] ARM: dts: Fix WLAN interrupt line for AM335x EVM-SK While Sitara AM335x SoCs are very close to OMAP SoCs, the 32-line GPIO controllers are numbered from 0 on AM335x and from 1 on OMAP. But when the configuration for the TI WLAN controllers was converted from platform data to device tree, this detail was overlooked, as 10 boards were using OMAP with the WL12xx and WL18xx controllers, and only one was based on AM335x. This invalid configuration prevents the WL1271 module on the AM335x EVM-SK from notifying interrupts to the SoC, and breaks the wlan driver. The DTS must be corrected to use the correct GPIO controller. Signed-off-by: Romain Izard Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-evmsk.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 87fc7a35e802..156d05efcb70 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -654,7 +654,7 @@ wlcore: wlcore@2 { compatible = "ti,wl1271"; reg = <2>; - interrupt-parent = <&gpio1>; + interrupt-parent = <&gpio0>; interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */ ref-clock-frequency = <38400000>; }; From b0494532214bdfbf241e94fabab5dd46f7b82631 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Mon, 11 May 2015 17:53:10 +0300 Subject: [PATCH 185/337] libceph: request a new osdmap if lingering request maps to no osd This commit does two things. First, if there are any homeless lingering requests, we now request a new osdmap even if the osdmap that is being processed brought no changes, i.e. if a given lingering request turned homeless in one of the previous epochs and remained homeless in the current epoch. Not doing so leaves us with a stale osdmap and as a result we may miss our window for reestablishing the watch and lose notifies. MON=1 OSD=1: # cat linger-needmap.sh #!/bin/bash rbd create --size 1 test DEV=$(rbd map test) ceph osd out 0 rbd map dne/dne # obtain a new osdmap as a side effect (!) sleep 1 ceph osd in 0 rbd resize --size 2 test # rbd info test | grep size -> 2M # blockdev --getsize $DEV -> 1M N.B.: Not obtaining a new osdmap in between "osd out" and "osd in" above is enough to make it miss that resize notify, but that is a bug^Wlimitation of ceph watch/notify v1. Second, homeless lingering requests are now kicked just like those lingering requests whose mapping has changed. This is mainly to recognize that a homeless lingering request makes no sense and to preserve the invariant that a registered lingering request is not sitting on any of r_req_lru_item lists. This spares us a WARN_ON, which commit ba9d114ec557 ("libceph: clear r_req_lru_item in __unregister_linger_request()") tried to fix the _wrong_ way. Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Ilya Dryomov Reviewed-by: Sage Weil --- net/ceph/osd_client.c | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-) diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c index 41a4abc7e98e..31d4b1ebff01 100644 --- a/net/ceph/osd_client.c +++ b/net/ceph/osd_client.c @@ -2017,20 +2017,29 @@ static void kick_requests(struct ceph_osd_client *osdc, bool force_resend, err = __map_request(osdc, req, force_resend || force_resend_writes); dout("__map_request returned %d\n", err); - if (err == 0) - continue; /* no change and no osd was specified */ if (err < 0) continue; /* hrm! */ - if (req->r_osd == NULL) { - dout("tid %llu maps to no valid osd\n", req->r_tid); - needmap++; /* request a newer map */ - continue; - } + if (req->r_osd == NULL || err > 0) { + if (req->r_osd == NULL) { + dout("lingering %p tid %llu maps to no osd\n", + req, req->r_tid); + /* + * A homeless lingering request makes + * no sense, as it's job is to keep + * a particular OSD connection open. + * Request a newer map and kick the + * request, knowing that it won't be + * resent until we actually get a map + * that can tell us where to send it. + */ + needmap++; + } - dout("kicking lingering %p tid %llu osd%d\n", req, req->r_tid, - req->r_osd ? req->r_osd->o_osd : -1); - __register_request(osdc, req); - __unregister_linger_request(osdc, req); + dout("kicking lingering %p tid %llu osd%d\n", req, + req->r_tid, req->r_osd ? req->r_osd->o_osd : -1); + __register_request(osdc, req); + __unregister_linger_request(osdc, req); + } } reset_changed_osds(osdc); mutex_unlock(&osdc->request_mutex); From 521a04d06a729e5971cdee7f84080387ed320527 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Mon, 11 May 2015 17:53:34 +0300 Subject: [PATCH 186/337] Revert "libceph: clear r_req_lru_item in __unregister_linger_request()" This reverts commit ba9d114ec5578e6e99a4dfa37ff8ae688040fd64. .. which introduced a regression that prevented all lingering requests requeued in kick_requests() from ever being sent to the OSDs, resulting in a lot of missed notifies. In retrospect it's pretty obvious that r_req_lru_item item in the case of lingering requests can be used not only for notarget, but also for unsent linkage due to how tightly actual map and enqueue operations are coupled in __map_request(). The assertion that was being silenced is taken care of in the previous ("libceph: request a new osdmap if lingering request maps to no osd") commit: by always kicking homeless lingering requests we ensure that none of them ends up on the notarget list outside of the critical section guarded by request_mutex. Cc: stable@vger.kernel.org # 3.18+, needs b0494532214b "libceph: request a new osdmap if lingering request maps to no osd" Signed-off-by: Ilya Dryomov Reviewed-by: Sage Weil --- net/ceph/osd_client.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c index 31d4b1ebff01..c4ec9239249a 100644 --- a/net/ceph/osd_client.c +++ b/net/ceph/osd_client.c @@ -1306,8 +1306,6 @@ static void __unregister_linger_request(struct ceph_osd_client *osdc, if (list_empty(&req->r_osd_item)) req->r_osd = NULL; } - - list_del_init(&req->r_req_lru_item); /* can be on notarget */ ceph_osdc_put_request(req); } From 153c35b6cccc0c72de9fae06c8e2c8b2c47d79d4 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Tue, 19 May 2015 18:54:41 -0700 Subject: [PATCH 187/337] Btrfs: fix regression in raid level conversion Commit 2f0810880f082fa8ba66ab2c33b02e4ff9770a5e changed btrfs_set_block_group_ro to avoid trying to allocate new chunks with the new raid profile during conversion. This fixed failures when there was no space on the drive to allocate a new chunk, but the metadata reserves were sufficient to continue the conversion. But this ended up causing a regression when the drive had plenty of space to allocate new chunks, mostly because reduce_alloc_profile isn't using the new raid profile. Fixing btrfs_reduce_alloc_profile is a bigger patch. For now, do a partial revert of 2f0810880, and don't error out if we hit ENOSPC. Signed-off-by: Chris Mason Tested-by: Dave Sterba Reported-by: Holger Hoffstaette --- fs/btrfs/extent-tree.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 45e3f086790b..0ec3acd14cbf 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -8829,6 +8829,24 @@ again: goto again; } + /* + * if we are changing raid levels, try to allocate a corresponding + * block group with the new raid level. + */ + alloc_flags = update_block_group_flags(root, cache->flags); + if (alloc_flags != cache->flags) { + ret = do_chunk_alloc(trans, root, alloc_flags, + CHUNK_ALLOC_FORCE); + /* + * ENOSPC is allowed here, we may have enough space + * already allocated at the new raid level to + * carry on + */ + if (ret == -ENOSPC) + ret = 0; + if (ret < 0) + goto out; + } ret = set_block_group_ro(cache, 0); if (!ret) From 7196ac113a4f38b7ca1a3282fd9edf328bd22287 Mon Sep 17 00:00:00 2001 From: Nakajima Akira Date: Wed, 22 Apr 2015 15:24:44 +0900 Subject: [PATCH 188/337] Fix to check Unique id and FileType when client refer file directly. When you refer file directly on cifs client, (e.g. ls -li , cd , stat ) the function return old inode number and filetype from old inode cache, though server has different inode number or filetype. When server is Windows, cifs client has same problem. When Server is Windows , This patch fixes bug in different filetype, but does not fix bug in different inode number. Because QUERY_PATH_INFO response by Windows does not include inode number(Index Number) . BUG INFO https://bugzilla.kernel.org/show_bug.cgi?id=90021 https://bugzilla.kernel.org/show_bug.cgi?id=90031 Reported-by: Nakajima Akira Signed-off-by: Nakajima Akira Reviewed-by: Shirish Pargaonkar Signed-off-by: Steve French --- fs/cifs/inode.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index ef71aa1515f6..f621b44cb800 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -401,9 +401,25 @@ int cifs_get_inode_info_unix(struct inode **pinode, rc = -ENOMEM; } else { /* we already have inode, update it */ + + /* if uniqueid is different, return error */ + if (unlikely(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM && + CIFS_I(*pinode)->uniqueid != fattr.cf_uniqueid)) { + rc = -ESTALE; + goto cgiiu_exit; + } + + /* if filetype is different, return error */ + if (unlikely(((*pinode)->i_mode & S_IFMT) != + (fattr.cf_mode & S_IFMT))) { + rc = -ESTALE; + goto cgiiu_exit; + } + cifs_fattr_to_inode(*pinode, &fattr); } +cgiiu_exit: return rc; } @@ -838,6 +854,15 @@ cifs_get_inode_info(struct inode **inode, const char *full_path, if (!*inode) rc = -ENOMEM; } else { + /* we already have inode, update it */ + + /* if filetype is different, return error */ + if (unlikely(((*inode)->i_mode & S_IFMT) != + (fattr.cf_mode & S_IFMT))) { + rc = -ESTALE; + goto cgii_exit; + } + cifs_fattr_to_inode(*inode, &fattr); } From 00b8c95b680791a72b4bb14dc371ff1f1daae39c Mon Sep 17 00:00:00 2001 From: Chengyu Song Date: Tue, 24 Mar 2015 20:18:49 -0400 Subject: [PATCH 189/337] cifs: potential missing check for posix_lock_file_wait posix_lock_file_wait may fail under certain circumstances, and its result is usually checked/returned. But given the complexity of cifs, I'm not sure if the result is intentially left unchecked and always expected to succeed. Signed-off-by: Chengyu Song Acked-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/file.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 5cfa7129d876..3f50cee79df9 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -1552,8 +1552,8 @@ cifs_setlk(struct file *file, struct file_lock *flock, __u32 type, rc = server->ops->mand_unlock_range(cfile, flock, xid); out: - if (flock->fl_flags & FL_POSIX) - posix_lock_file_wait(file, flock); + if (flock->fl_flags & FL_POSIX && !rc) + rc = posix_lock_file_wait(file, flock); return rc; } From b29103076bec8316e155e71309dc0fba499022c6 Mon Sep 17 00:00:00 2001 From: Nakajima Akira Date: Thu, 9 Apr 2015 17:27:39 +0900 Subject: [PATCH 190/337] Fix to convert SURROGATE PAIR Garbled characters happen by using surrogate pair for filename. (replace each 1 character to ??) [Steps to Reproduce for bug] client# touch $(echo -e '\xf0\x9d\x9f\xa3') client# touch $(echo -e '\xf0\x9d\x9f\xa4') client# ls -li You see same inode number, same filename(=?? and ??) . Fix the bug about these functions do not consider about surrogate pair (and IVS). cifs_utf16_bytes() cifs_mapchar() cifs_from_utf16() cifsConvertToUTF16() Reported-by: Nakajima Akira Signed-off-by: Nakajima Akira Signed-off-by: Steve French --- fs/cifs/cifs_unicode.c | 182 ++++++++++++++++++++++++++++++----------- 1 file changed, 136 insertions(+), 46 deletions(-) diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c index 0303c6793d90..5a53ac6b1e02 100644 --- a/fs/cifs/cifs_unicode.c +++ b/fs/cifs/cifs_unicode.c @@ -27,41 +27,6 @@ #include "cifsglob.h" #include "cifs_debug.h" -/* - * cifs_utf16_bytes - how long will a string be after conversion? - * @utf16 - pointer to input string - * @maxbytes - don't go past this many bytes of input string - * @codepage - destination codepage - * - * Walk a utf16le string and return the number of bytes that the string will - * be after being converted to the given charset, not including any null - * termination required. Don't walk past maxbytes in the source buffer. - */ -int -cifs_utf16_bytes(const __le16 *from, int maxbytes, - const struct nls_table *codepage) -{ - int i; - int charlen, outlen = 0; - int maxwords = maxbytes / 2; - char tmp[NLS_MAX_CHARSET_SIZE]; - __u16 ftmp; - - for (i = 0; i < maxwords; i++) { - ftmp = get_unaligned_le16(&from[i]); - if (ftmp == 0) - break; - - charlen = codepage->uni2char(ftmp, tmp, NLS_MAX_CHARSET_SIZE); - if (charlen > 0) - outlen += charlen; - else - outlen++; - } - - return outlen; -} - int cifs_remap(struct cifs_sb_info *cifs_sb) { int map_type; @@ -155,10 +120,13 @@ convert_sfm_char(const __u16 src_char, char *target) * enough to hold the result of the conversion (at least NLS_MAX_CHARSET_SIZE). */ static int -cifs_mapchar(char *target, const __u16 src_char, const struct nls_table *cp, +cifs_mapchar(char *target, const __u16 *from, const struct nls_table *cp, int maptype) { int len = 1; + __u16 src_char; + + src_char = *from; if ((maptype == SFM_MAP_UNI_RSVD) && convert_sfm_char(src_char, target)) return len; @@ -168,10 +136,23 @@ cifs_mapchar(char *target, const __u16 src_char, const struct nls_table *cp, /* if character not one of seven in special remap set */ len = cp->uni2char(src_char, target, NLS_MAX_CHARSET_SIZE); - if (len <= 0) { - *target = '?'; - len = 1; - } + if (len <= 0) + goto surrogate_pair; + + return len; + +surrogate_pair: + /* convert SURROGATE_PAIR and IVS */ + if (strcmp(cp->charset, "utf8")) + goto unknown; + len = utf16s_to_utf8s(from, 3, UTF16_LITTLE_ENDIAN, target, 6); + if (len <= 0) + goto unknown; + return len; + +unknown: + *target = '?'; + len = 1; return len; } @@ -206,7 +187,7 @@ cifs_from_utf16(char *to, const __le16 *from, int tolen, int fromlen, int nullsize = nls_nullsize(codepage); int fromwords = fromlen / 2; char tmp[NLS_MAX_CHARSET_SIZE]; - __u16 ftmp; + __u16 ftmp[3]; /* ftmp[3] = 3array x 2bytes = 6bytes UTF-16 */ /* * because the chars can be of varying widths, we need to take care @@ -217,9 +198,17 @@ cifs_from_utf16(char *to, const __le16 *from, int tolen, int fromlen, safelen = tolen - (NLS_MAX_CHARSET_SIZE + nullsize); for (i = 0; i < fromwords; i++) { - ftmp = get_unaligned_le16(&from[i]); - if (ftmp == 0) + ftmp[0] = get_unaligned_le16(&from[i]); + if (ftmp[0] == 0) break; + if (i + 1 < fromwords) + ftmp[1] = get_unaligned_le16(&from[i + 1]); + else + ftmp[1] = 0; + if (i + 2 < fromwords) + ftmp[2] = get_unaligned_le16(&from[i + 2]); + else + ftmp[2] = 0; /* * check to see if converting this character might make the @@ -234,6 +223,17 @@ cifs_from_utf16(char *to, const __le16 *from, int tolen, int fromlen, /* put converted char into 'to' buffer */ charlen = cifs_mapchar(&to[outlen], ftmp, codepage, map_type); outlen += charlen; + + /* charlen (=bytes of UTF-8 for 1 character) + * 4bytes UTF-8(surrogate pair) is charlen=4 + * (4bytes UTF-16 code) + * 7-8bytes UTF-8(IVS) is charlen=3+4 or 4+4 + * (2 UTF-8 pairs divided to 2 UTF-16 pairs) */ + if (charlen == 4) + i++; + else if (charlen >= 5) + /* 5-6bytes UTF-8 */ + i += 2; } /* properly null-terminate string */ @@ -295,6 +295,46 @@ success: return i; } +/* + * cifs_utf16_bytes - how long will a string be after conversion? + * @utf16 - pointer to input string + * @maxbytes - don't go past this many bytes of input string + * @codepage - destination codepage + * + * Walk a utf16le string and return the number of bytes that the string will + * be after being converted to the given charset, not including any null + * termination required. Don't walk past maxbytes in the source buffer. + */ +int +cifs_utf16_bytes(const __le16 *from, int maxbytes, + const struct nls_table *codepage) +{ + int i; + int charlen, outlen = 0; + int maxwords = maxbytes / 2; + char tmp[NLS_MAX_CHARSET_SIZE]; + __u16 ftmp[3]; + + for (i = 0; i < maxwords; i++) { + ftmp[0] = get_unaligned_le16(&from[i]); + if (ftmp[0] == 0) + break; + if (i + 1 < maxwords) + ftmp[1] = get_unaligned_le16(&from[i + 1]); + else + ftmp[1] = 0; + if (i + 2 < maxwords) + ftmp[2] = get_unaligned_le16(&from[i + 2]); + else + ftmp[2] = 0; + + charlen = cifs_mapchar(tmp, ftmp, codepage, NO_MAP_UNI_RSVD); + outlen += charlen; + } + + return outlen; +} + /* * cifs_strndup_from_utf16 - copy a string from wire format to the local * codepage @@ -409,10 +449,15 @@ cifsConvertToUTF16(__le16 *target, const char *source, int srclen, char src_char; __le16 dst_char; wchar_t tmp; + wchar_t *wchar_to; /* UTF-16 */ + int ret; + unicode_t u; if (map_chars == NO_MAP_UNI_RSVD) return cifs_strtoUTF16(target, source, PATH_MAX, cp); + wchar_to = kzalloc(6, GFP_KERNEL); + for (i = 0; i < srclen; j++) { src_char = source[i]; charlen = 1; @@ -441,11 +486,55 @@ cifsConvertToUTF16(__le16 *target, const char *source, int srclen, * if no match, use question mark, which at least in * some cases serves as wild card */ - if (charlen < 1) { - dst_char = cpu_to_le16(0x003f); - charlen = 1; + if (charlen > 0) + goto ctoUTF16; + + /* convert SURROGATE_PAIR */ + if (strcmp(cp->charset, "utf8") || !wchar_to) + goto unknown; + if (*(source + i) & 0x80) { + charlen = utf8_to_utf32(source + i, 6, &u); + if (charlen < 0) + goto unknown; + } else + goto unknown; + ret = utf8s_to_utf16s(source + i, charlen, + UTF16_LITTLE_ENDIAN, + wchar_to, 6); + if (ret < 0) + goto unknown; + + i += charlen; + dst_char = cpu_to_le16(*wchar_to); + if (charlen <= 3) + /* 1-3bytes UTF-8 to 2bytes UTF-16 */ + put_unaligned(dst_char, &target[j]); + else if (charlen == 4) { + /* 4bytes UTF-8(surrogate pair) to 4bytes UTF-16 + * 7-8bytes UTF-8(IVS) divided to 2 UTF-16 + * (charlen=3+4 or 4+4) */ + put_unaligned(dst_char, &target[j]); + dst_char = cpu_to_le16(*(wchar_to + 1)); + j++; + put_unaligned(dst_char, &target[j]); + } else if (charlen >= 5) { + /* 5-6bytes UTF-8 to 6bytes UTF-16 */ + put_unaligned(dst_char, &target[j]); + dst_char = cpu_to_le16(*(wchar_to + 1)); + j++; + put_unaligned(dst_char, &target[j]); + dst_char = cpu_to_le16(*(wchar_to + 2)); + j++; + put_unaligned(dst_char, &target[j]); } + continue; + +unknown: + dst_char = cpu_to_le16(0x003f); + charlen = 1; } + +ctoUTF16: /* * character may take more than one byte in the source string, * but will take exactly two bytes in the target string @@ -456,6 +545,7 @@ cifsConvertToUTF16(__le16 *target, const char *source, int srclen, ctoUTF16_out: put_unaligned(0, &target[j]); /* Null terminate target unicode string */ + kfree(wchar_to); return j; } From 4afe260bab50290a05e5732570329a530ed023f3 Mon Sep 17 00:00:00 2001 From: Federico Sauter Date: Tue, 17 Mar 2015 17:45:28 +0100 Subject: [PATCH 191/337] CIFS: Fix race condition on RFC1002_NEGATIVE_SESSION_RESPONSE This patch fixes a race condition that occurs when connecting to a NT 3.51 host without specifying a NetBIOS name. In that case a RFC1002_NEGATIVE_SESSION_RESPONSE is received and the SMB negotiation is reattempted, but under some conditions it leads SendReceive() to hang forever while waiting for srv_mutex. This, in turn, sets the calling process to an uninterruptible sleep state and makes it unkillable. The solution is to unlock the srv_mutex acquired in the demux thread *before* going to sleep (after the reconnect error) and before reattempting the connection. --- fs/cifs/connect.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index f3bfe08e177b..8383d5ea4202 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -386,6 +386,7 @@ cifs_reconnect(struct TCP_Server_Info *server) rc = generic_ip_connect(server); if (rc) { cifs_dbg(FYI, "reconnect error %d\n", rc); + mutex_unlock(&server->srv_mutex); msleep(3000); } else { atomic_inc(&tcpSesReconnectCount); @@ -393,8 +394,8 @@ cifs_reconnect(struct TCP_Server_Info *server) if (server->tcpStatus != CifsExiting) server->tcpStatus = CifsNeedNegotiate; spin_unlock(&GlobalMid_Lock); + mutex_unlock(&server->srv_mutex); } - mutex_unlock(&server->srv_mutex); } while (server->tcpStatus == CifsNeedReconnect); return rc; From 3ad2a5f57656a14d964b673a5a0e4ab0e583c870 Mon Sep 17 00:00:00 2001 From: Minghuan Lian Date: Wed, 20 May 2015 10:13:15 -0500 Subject: [PATCH 192/337] irqchip/gicv3-its: ITS table size should not be smaller than PSZ When allocating a device table, if the requested allocation is smaller than the default granule size of the ITS then, we need to round up to the default size. Signed-off-by: Minghuan Lian [ stuart: Added comments and massaged changelog ] Signed-off-by: Stuart Yoder Reviewed-by: Marc Zygnier Cc: Cc: Link: http://lkml.kernel.org/r/1432134795-661-1-git-send-email-stuart.yoder@freescale.com Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-gic-v3-its.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 9687f8afebff..1b7e155869f6 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -828,7 +828,14 @@ static int its_alloc_tables(struct its_node *its) u64 typer = readq_relaxed(its->base + GITS_TYPER); u32 ids = GITS_TYPER_DEVBITS(typer); - order = get_order((1UL << ids) * entry_size); + /* + * 'order' was initialized earlier to the default page + * granule of the the ITS. We can't have an allocation + * smaller than that. If the requested allocation + * is smaller, round up to the default page granule. + */ + order = max(get_order((1UL << ids) * entry_size), + order); if (order >= MAX_ORDER) { order = MAX_ORDER - 1; pr_warn("%s: Device Table too large, reduce its page order to %u\n", From c07678bb01374c510b0f6d4a3832c28ba33e9613 Mon Sep 17 00:00:00 2001 From: Matthew Finlay Date: Tue, 19 May 2015 00:11:48 -0700 Subject: [PATCH 193/337] IB/cma: Fix broken AF_IB UD support Support for using UD and AF_IB is currently broken. The IB_CM_SIDR_REQ_RECEIVED message is not handled properly in cma_save_net_info() and we end up falling into code that will try and process the request as ipv4/ipv6, which will end up failing. The resolution is to add a check for the SIDR_REQ and call cma_save_ib_info() with a NULL path record. Change cma_save_ib_info() to copy the src sib info from the listen_id when the path record is NULL. Reported-by: Hari Shankar Signed-off-by: Matt Finlay Acked-by: Sean Hefty Signed-off-by: Doug Ledford --- drivers/infiniband/core/cma.c | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 06441a43c3aa..38ffe0981503 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -845,18 +845,26 @@ static void cma_save_ib_info(struct rdma_cm_id *id, struct rdma_cm_id *listen_id listen_ib = (struct sockaddr_ib *) &listen_id->route.addr.src_addr; ib = (struct sockaddr_ib *) &id->route.addr.src_addr; ib->sib_family = listen_ib->sib_family; - ib->sib_pkey = path->pkey; - ib->sib_flowinfo = path->flow_label; - memcpy(&ib->sib_addr, &path->sgid, 16); + if (path) { + ib->sib_pkey = path->pkey; + ib->sib_flowinfo = path->flow_label; + memcpy(&ib->sib_addr, &path->sgid, 16); + } else { + ib->sib_pkey = listen_ib->sib_pkey; + ib->sib_flowinfo = listen_ib->sib_flowinfo; + ib->sib_addr = listen_ib->sib_addr; + } ib->sib_sid = listen_ib->sib_sid; ib->sib_sid_mask = cpu_to_be64(0xffffffffffffffffULL); ib->sib_scope_id = listen_ib->sib_scope_id; - ib = (struct sockaddr_ib *) &id->route.addr.dst_addr; - ib->sib_family = listen_ib->sib_family; - ib->sib_pkey = path->pkey; - ib->sib_flowinfo = path->flow_label; - memcpy(&ib->sib_addr, &path->dgid, 16); + if (path) { + ib = (struct sockaddr_ib *) &id->route.addr.dst_addr; + ib->sib_family = listen_ib->sib_family; + ib->sib_pkey = path->pkey; + ib->sib_flowinfo = path->flow_label; + memcpy(&ib->sib_addr, &path->dgid, 16); + } } static __be16 ss_get_port(const struct sockaddr_storage *ss) @@ -905,9 +913,11 @@ static int cma_save_net_info(struct rdma_cm_id *id, struct rdma_cm_id *listen_id { struct cma_hdr *hdr; - if ((listen_id->route.addr.src_addr.ss_family == AF_IB) && - (ib_event->event == IB_CM_REQ_RECEIVED)) { - cma_save_ib_info(id, listen_id, ib_event->param.req_rcvd.primary_path); + if (listen_id->route.addr.src_addr.ss_family == AF_IB) { + if (ib_event->event == IB_CM_REQ_RECEIVED) + cma_save_ib_info(id, listen_id, ib_event->param.req_rcvd.primary_path); + else if (ib_event->event == IB_CM_SIDR_REQ_RECEIVED) + cma_save_ib_info(id, listen_id, NULL); return 0; } From 72eceab743cf61082357068e0686ffac66fe47e5 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 20 May 2015 14:37:41 -0700 Subject: [PATCH 194/337] Input: alps - fix finger jumps on lifting 2 fingers on v7 touchpad On v7 touchpads sometimes when 2 fingers are moved down on the touchpad until they "fall of" the touchpad, the second touch will report 0 for y (max y really since the y axis is inverted) and max x as coordinates, rather then reporting 0, 0 as is expected for a non touching finger. This commit detects this and treats these touches as non touching. See the evemu-recording here: https://bugzilla.redhat.com/attachment.cgi?id=1025058 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1221200 Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/alps.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index e6708f6efb4d..7752bd59d4b7 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -941,6 +941,11 @@ static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt, case V7_PACKET_ID_TWO: mt[1].x &= ~0x000F; mt[1].y |= 0x000F; + /* Detect false-postive touches where x & y report max value */ + if (mt[1].y == 0x7ff && mt[1].x == 0xff0) { + mt[1].x = 0; + /* y gets set to 0 at the end of this function */ + } break; case V7_PACKET_ID_MULTI: From 412dbad2c7e273b48e8477247c74b2ad65c452d2 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Wed, 20 May 2015 14:46:14 -0700 Subject: [PATCH 195/337] Input: vmmouse - do not reference non-existing version of X driver The vmmouse Kconfig help text was referring to an incorrect user-space driver version. Fix this. Signed-off-by: Thomas Hellstrom Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 7462d2fc8cfe..d7820d1152d2 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -156,7 +156,7 @@ config MOUSE_PS2_VMMOUSE Say Y here if you are running under control of VMware hypervisor (ESXi, Workstation or Fusion). Also make sure that when you enable this option, you remove the xf86-input-vmmouse user-space driver - or upgrade it to at least xf86-input-vmmouse 13.0.1, which doesn't + or upgrade it to at least xf86-input-vmmouse 13.1.0, which doesn't load in the presence of an in-kernel vmmouse driver. If unsure, say N. From 487696957e3bd64ccffe62c0ac4ff7bf662785ab Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Wed, 13 May 2015 09:30:08 -0700 Subject: [PATCH 196/337] raid5: fix broken async operation chain ops_run_reconstruct6() doesn't correctly chain asyn operations. The tx returned by async_gen_syndrome should be added as the dependent tx of next stripe. The issue is introduced by commit 59fc630b8b5f9f21c8ce3ba153341c107dce1b0c RAID5: batch adjacent full stripe write Reported-and-tested-by: Maxime Ripard Signed-off-by: Shaohua Li Signed-off-by: NeilBrown --- drivers/md/raid5.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 1ba97fdc6df1..b9f2b9cc6060 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -1822,7 +1822,7 @@ again: } else init_async_submit(&submit, 0, tx, NULL, NULL, to_addr_conv(sh, percpu, j)); - async_gen_syndrome(blocks, 0, count+2, STRIPE_SIZE, &submit); + tx = async_gen_syndrome(blocks, 0, count+2, STRIPE_SIZE, &submit); if (!last_stripe) { j++; sh = list_first_entry(&sh->batch_list, struct stripe_head, From a81157768a00e8cf8a7b43b5ea5cac931262374f Mon Sep 17 00:00:00 2001 From: Eric Work Date: Mon, 18 May 2015 23:26:23 -0700 Subject: [PATCH 197/337] md/raid0: fix restore to sector variable in raid0_make_request The variable "sector" in "raid0_make_request()" was improperly updated by a call to "sector_div()" which modifies its first argument in place. Commit 47d68979cc968535cb87f3e5f2e6a3533ea48fbd restored this variable after the call for later re-use. Unfortunetly the restore was done after the referenced variable "bio" was advanced. This lead to the original value and the restored value being different. Here we move this line to the proper place. One observed side effect of this bug was discarding a file though unlinking would cause an unrelated file's contents to be discarded. Signed-off-by: NeilBrown Fixes: 47d68979cc96 ("md/raid0: fix bug with chunksize not a power of 2.") Cc: stable@vger.kernel.org (any that received above backport) URL: https://bugzilla.kernel.org/show_bug.cgi?id=98501 --- drivers/md/raid0.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index 6a68ef5246d4..efb654eb5399 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -524,6 +524,9 @@ static void raid0_make_request(struct mddev *mddev, struct bio *bio) ? (sector & (chunk_sects-1)) : sector_div(sector, chunk_sects)); + /* Restore due to sector_div */ + sector = bio->bi_iter.bi_sector; + if (sectors < bio_sectors(bio)) { split = bio_split(bio, sectors, GFP_NOIO, fs_bio_set); bio_chain(split, bio); @@ -531,7 +534,6 @@ static void raid0_make_request(struct mddev *mddev, struct bio *bio) split = bio; } - sector = bio->bi_iter.bi_sector; zone = find_zone(mddev->private, §or); tmp_dev = map_sector(mddev, zone, sector, §or); split->bi_bdev = tmp_dev->bdev; From 8532e3439087de69bb1b71fd6be2baa6fc196a55 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 20 May 2015 15:05:09 +1000 Subject: [PATCH 198/337] md/bitmap: remove rcu annotation from pointer arithmetic. Evaluating "&mddev->disks" is simple pointer arithmetic, so it does not need 'rcu' annotations - no dereferencing is happening. Also enhance the comment to explain that 'rdev' in that case is not actually a pointer to an rdev. Reported-by: Patrick Marlier Signed-off-by: NeilBrown --- drivers/md/bitmap.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 2bc56e2a3526..135a0907e9de 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -177,11 +177,16 @@ static struct md_rdev *next_active_rdev(struct md_rdev *rdev, struct mddev *mdde * nr_pending is 0 and In_sync is clear, the entries we return will * still be in the same position on the list when we re-enter * list_for_each_entry_continue_rcu. + * + * Note that if entered with 'rdev == NULL' to start at the + * beginning, we temporarily assign 'rdev' to an address which + * isn't really an rdev, but which can be used by + * list_for_each_entry_continue_rcu() to find the first entry. */ rcu_read_lock(); if (rdev == NULL) /* start at the beginning */ - rdev = list_entry_rcu(&mddev->disks, struct md_rdev, same_set); + rdev = list_entry(&mddev->disks, struct md_rdev, same_set); else { /* release the previous rdev and start from there. */ rdev_dec_pending(rdev, mddev); From 755c814a7d826257d5488cfaa801ec19377c472a Mon Sep 17 00:00:00 2001 From: Stephane Viau Date: Wed, 20 May 2015 10:57:27 -0400 Subject: [PATCH 199/337] drm/msm/mdp5: fix incorrect parameter for msm_framebuffer_iova() The index of ->planes[] array (3rd parameter) cannot be equal to MAX_PLANE. This looks like a typo that is now fixed. Signed-off-by: Stephane Viau Acked-by: Rob Clark Signed-off-by: Dave Airlie --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c index 18a3d203b174..57b8f56ae9d0 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c @@ -273,7 +273,7 @@ static void set_scanout_locked(struct drm_plane *plane, mdp5_write(mdp5_kms, REG_MDP5_PIPE_SRC2_ADDR(pipe), msm_framebuffer_iova(fb, mdp5_kms->id, 2)); mdp5_write(mdp5_kms, REG_MDP5_PIPE_SRC3_ADDR(pipe), - msm_framebuffer_iova(fb, mdp5_kms->id, 4)); + msm_framebuffer_iova(fb, mdp5_kms->id, 3)); plane->fb = fb; } From 0f28d1281b6c54cc98746ae61e44e7f540758ed4 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 18 May 2015 10:38:25 -0400 Subject: [PATCH 200/337] drm/radeon: retry dcpd fetch Retry the dpcd fetch several times. Some eDP panels fail several times before the fetch is successful. bug: https://bugs.freedesktop.org/show_bug.cgi?id=73530 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/atombios_dp.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c index 3e3290c203c6..b435c859dcbc 100644 --- a/drivers/gpu/drm/radeon/atombios_dp.c +++ b/drivers/gpu/drm/radeon/atombios_dp.c @@ -421,19 +421,21 @@ bool radeon_dp_getdpcd(struct radeon_connector *radeon_connector) { struct radeon_connector_atom_dig *dig_connector = radeon_connector->con_priv; u8 msg[DP_DPCD_SIZE]; - int ret; + int ret, i; - ret = drm_dp_dpcd_read(&radeon_connector->ddc_bus->aux, DP_DPCD_REV, msg, - DP_DPCD_SIZE); - if (ret > 0) { - memcpy(dig_connector->dpcd, msg, DP_DPCD_SIZE); + for (i = 0; i < 7; i++) { + ret = drm_dp_dpcd_read(&radeon_connector->ddc_bus->aux, DP_DPCD_REV, msg, + DP_DPCD_SIZE); + if (ret == DP_DPCD_SIZE) { + memcpy(dig_connector->dpcd, msg, DP_DPCD_SIZE); - DRM_DEBUG_KMS("DPCD: %*ph\n", (int)sizeof(dig_connector->dpcd), - dig_connector->dpcd); + DRM_DEBUG_KMS("DPCD: %*ph\n", (int)sizeof(dig_connector->dpcd), + dig_connector->dpcd); - radeon_dp_probe_oui(radeon_connector); + radeon_dp_probe_oui(radeon_connector); - return true; + return true; + } } dig_connector->dpcd[0] = 0; return false; From 6ca121351bf65f9f3375d3b0d54c2aed3b3f47ad Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 20 May 2015 17:58:49 -0400 Subject: [PATCH 201/337] drm/radeon: fix error flag checking in native aux path MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit That atom table does not check these bits. Fixes aux regressions on some boards. Reported-by: Malte Schröder Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_dp_auxch.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_dp_auxch.c b/drivers/gpu/drm/radeon/radeon_dp_auxch.c index bf1fecc6cceb..fcbd60bb0349 100644 --- a/drivers/gpu/drm/radeon/radeon_dp_auxch.c +++ b/drivers/gpu/drm/radeon/radeon_dp_auxch.c @@ -30,8 +30,6 @@ AUX_SW_RX_HPD_DISCON | \ AUX_SW_RX_PARTIAL_BYTE | \ AUX_SW_NON_AUX_MODE | \ - AUX_SW_RX_MIN_COUNT_VIOL | \ - AUX_SW_RX_INVALID_STOP | \ AUX_SW_RX_SYNC_INVALID_L | \ AUX_SW_RX_SYNC_INVALID_H | \ AUX_SW_RX_INVALID_START | \ From 2fc863a5143d64b8f06576cc3d7fd5622c5cf3b5 Mon Sep 17 00:00:00 2001 From: Haim Dreyfuss Date: Wed, 20 May 2015 08:10:43 +0300 Subject: [PATCH 202/337] iwlwifi: mvm: Free fw_status after use to avoid memory leak fw_status is the only pointer pointing to a block of memory allocated above and should be freed after use. Note: this come from Klockwork static analyzer. Cc: stable@vger.kernel.org [3.19+] Fixes: 2021a89d7b8a ("iwlwifi: mvm: treat netdetect wake up separately") Signed-off-by: Haim Dreyfuss Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/d3.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c index 1b1b2bf26819..42dadaf5e24d 100644 --- a/drivers/net/wireless/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/iwlwifi/mvm/d3.c @@ -1750,8 +1750,10 @@ static void iwl_mvm_query_netdetect_reasons(struct iwl_mvm *mvm, int i, j, n_matches, ret; fw_status = iwl_mvm_get_wakeup_status(mvm, vif); - if (!IS_ERR_OR_NULL(fw_status)) + if (!IS_ERR_OR_NULL(fw_status)) { reasons = le32_to_cpu(fw_status->wakeup_reasons); + kfree(fw_status); + } if (reasons & IWL_WOWLAN_WAKEUP_BY_RFKILL_DEASSERTED) wakeup.rfkill_release = true; From 18f84673fb0fb3b4727ecf53a7455874172899d4 Mon Sep 17 00:00:00 2001 From: Liad Kaufman Date: Wed, 20 May 2015 15:50:07 +0300 Subject: [PATCH 203/337] iwlwifi: nvm: force mac from otp in case nvm mac is reserved Take the MAC address from the OTP even if one is present in the NVM, if that MAC address happens to be a reserved one. Signed-off-by: Liad Kaufman Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/iwl-nvm-parse.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c index cf86f3cdbb8e..75e96db6626b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c +++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c @@ -533,6 +533,10 @@ static void iwl_set_hw_address_family_8000(struct device *dev, const u8 *hw_addr; if (mac_override) { + static const u8 reserved_mac[] = { + 0x02, 0xcc, 0xaa, 0xff, 0xee, 0x00 + }; + hw_addr = (const u8 *)(mac_override + MAC_ADDRESS_OVERRIDE_FAMILY_8000); @@ -544,7 +548,12 @@ static void iwl_set_hw_address_family_8000(struct device *dev, data->hw_addr[4] = hw_addr[5]; data->hw_addr[5] = hw_addr[4]; - if (is_valid_ether_addr(data->hw_addr)) + /* + * Force the use of the OTP MAC address in case of reserved MAC + * address in the NVM, or if address is given but invalid. + */ + if (is_valid_ether_addr(data->hw_addr) && + memcmp(reserved_mac, hw_addr, ETH_ALEN) != 0) return; IWL_ERR_DEV(dev, From 165b3c4f78ca72bd83bf6abd9ecc472c09f444d3 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 4 May 2015 11:20:52 +0300 Subject: [PATCH 204/337] iwlwifi: mvm: BT Coex - duplicate the command if sent ASYNC There are buses that can't handle ASYNC command without copying them. Duplicate the host command instead. Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/coex_legacy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/coex_legacy.c b/drivers/net/wireless/iwlwifi/mvm/coex_legacy.c index d954591e0be5..6ac6de2af977 100644 --- a/drivers/net/wireless/iwlwifi/mvm/coex_legacy.c +++ b/drivers/net/wireless/iwlwifi/mvm/coex_legacy.c @@ -776,7 +776,7 @@ static int iwl_mvm_bt_coex_reduced_txp(struct iwl_mvm *mvm, u8 sta_id, struct iwl_host_cmd cmd = { .id = BT_CONFIG, .len = { sizeof(*bt_cmd), }, - .dataflags = { IWL_HCMD_DFL_NOCOPY, }, + .dataflags = { IWL_HCMD_DFL_DUP, }, .flags = CMD_ASYNC, }; struct iwl_mvm_sta *mvmsta; From dcfc7fb134afc3b8e3d1070ef6a6d6faa9d383ef Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Tue, 28 Apr 2015 08:41:55 +0300 Subject: [PATCH 205/337] iwlwifi: mvm: take the UCODE_DOWN reference when resuming The __iwl_mvm_resume() function always returns 1, which causes mac80211 to do a reconfig with IEEE80211_RECONFIG_TYPE_RESTART. This type of reconfig calls iwl_mvm_restart_complete(), where we unref the IWL_MVM_REF_UCODE_DOWN, so we should always take the reference in this case. This prevents this kind of warning from happening: [40026.103025] WARNING: at /root/iwlwifi/iwlwifi-stack-dev/drivers/net/wireless/iwlwifi/mvm/mac80211.c:236 iwl_mvm_unref+0xc9/0xd0 [iwlmvm]() [40026.105145] Modules linked in: iwlmvm(O) iwlwifi(O) mac80211(O) cfg80211(O) compat(O) ctr ccm arc4 autofs4 snd_hda_codec_hdmi snd_hda_codec_idt joydev coretemp kvm_intel kvm aesni_intel ablk_helper cryptd lrw aes_i586 snd_hda_intel xts snd_hda_codec gf128mul snd_hwdep snd_pcm snd_seq_midi dell_wmi snd_rawmidi sparse_keymap snd_seq_midi_event snd_seq uvcvideo dell_laptop videobuf2_core dcdbas microcode videodev psmouse snd_timer videobuf2_vmalloc videobuf2_memops serio_raw snd_seq_device btusb i915 snd bluetooth lpc_ich drm_kms_helper soundcore snd_page_alloc drm i2c_algo_bit wmi parport_pc ppdev video binfmt_misc rpcsec_gss_krb5 nfsd mac_hid nfs_acl nfsv4 auth_rpcgss nfs fscache lockd sunrpc msdos lp parport sdhci_pci sdhci ahci libahci e1000e mmc_core ptp pps_core [last unloaded: compat] [40026.117640] CPU: 2 PID: 3827 Comm: bash Tainted: G W O 3.10.29-dev #1 [40026.120216] Hardware name: Dell Inc. Latitude E6430/0CPWYR, BIOS A09 12/13/2012 [40026.122815] f8effd18 f8effd18 e740fd18 c168aa62 e740fd40 c103a824 c1871238 f8effd18 [40026.125527] 000000ec f8ec79c9 f8ec79c9 d5d29ba4 d5d2a20c 00000000 e740fd50 c103a862 [40026.128209] 00000009 00000000 e740fd7c f8ec79c9 f1c591c4 00000400 00000000 f8efb490 [40026.130886] Call Trace: [40026.133506] [] dump_stack+0x16/0x18 [40026.136115] [] warn_slowpath_common+0x64/0x80 [40026.138727] [] ? iwl_mvm_unref+0xc9/0xd0 [iwlmvm] [40026.141319] [] ? iwl_mvm_unref+0xc9/0xd0 [iwlmvm] [40026.143881] [] warn_slowpath_null+0x22/0x30 [40026.146453] [] iwl_mvm_unref+0xc9/0xd0 [iwlmvm] [40026.149030] [] iwl_mvm_mac_reconfig_complete+0x7d/0x210 [iwlmvm] [40026.151645] [] ? ftrace_raw_event_drv_reconfig_complete+0xc0/0xe0 [mac80211] [40026.154291] [] ieee80211_reconfig+0x28e/0x2620 [mac80211] [40026.156920] [] ? ring_buffer_unlock_commit+0xba/0x100 [40026.159585] [] ieee80211_resume+0x6d/0x80 [mac80211] [40026.162206] [] wiphy_resume+0x72/0x260 [cfg80211] [40026.164799] [] ? device_resume+0x57/0x150 [40026.167425] [] ? wiphy_suspend+0x710/0x710 [cfg80211] [40026.170075] [] dpm_run_callback+0x2e/0x50 [40026.172695] [] device_resume+0x91/0x150 [40026.175334] [] dpm_resume+0xf6/0x200 [40026.177922] [] dpm_resume_end+0x10/0x20 [40026.180489] [] suspend_devices_and_enter+0x177/0x480 [40026.183037] [] ? printk+0x4d/0x4f [40026.185559] [] pm_suspend+0x176/0x210 [40026.188065] [] state_store+0x5d/0xb0 [40026.190581] [] ? wakeup_count_show+0x50/0x50 [40026.193052] [] kobj_attr_store+0x1b/0x30 [40026.195608] [] sysfs_write_file+0xab/0x100 [40026.198055] [] ? sysfs_poll+0xa0/0xa0 [40026.200469] [] vfs_write+0xa5/0x1c0 [40026.202893] [] SyS_write+0x57/0xa0 [40026.205245] [] sysenter_do_call+0x12/0x32 [40026.207619] ---[ end trace db1d5a72a0381b0a ]--- Signed-off-by: Luciano Coelho Reviewed-by: EliadX Peller Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/d3.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c index 42dadaf5e24d..91ca8df007f7 100644 --- a/drivers/net/wireless/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/iwlwifi/mvm/d3.c @@ -1917,6 +1917,14 @@ out: /* return 1 to reconfigure the device */ set_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status); set_bit(IWL_MVM_STATUS_D3_RECONFIG, &mvm->status); + + /* We always return 1, which causes mac80211 to do a reconfig + * with IEEE80211_RECONFIG_TYPE_RESTART. This type of + * reconfig calls iwl_mvm_restart_complete(), where we unref + * the IWL_MVM_REF_UCODE_DOWN, so we need to take the + * reference here. + */ + iwl_mvm_ref(mvm, IWL_MVM_REF_UCODE_DOWN); return 1; } @@ -2023,7 +2031,6 @@ static int iwl_mvm_d3_test_release(struct inode *inode, struct file *file) __iwl_mvm_resume(mvm, true); rtnl_unlock(); iwl_abort_notification_waits(&mvm->notif_wait); - iwl_mvm_ref(mvm, IWL_MVM_REF_UCODE_DOWN); ieee80211_restart_hw(mvm->hw); /* wait for restart and disconnect all interfaces */ From a500e469ead055f35c7b2d0a1104e1bd58e34e70 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Mon, 4 May 2015 17:03:17 +0300 Subject: [PATCH 206/337] iwlwifi: mvm: clean net-detect info if device was reset during suspend If the device is reset during suspend with net-detect enabled, we leave the net-detect information dangling and this causes the next suspend to fail with a warning: [21795.351010] WARNING: at /root/iwlwifi/iwlwifi-stack-dev/drivers/net/wireless/iwlwifi/mvm/d3.c:989 __iwl_mvm_suspend.isra.6+0x2be/0x460 [iwlmvm]() [21795.353253] Modules linked in: iwlmvm(O) iwlwifi(O) mac80211(O) cfg80211(O) compat(O) [...] [21795.366168] CPU: 1 PID: 3645 Comm: bash Tainted: G O 3.10.29-dev #1 [21795.368785] Hardware name: Dell Inc. Latitude E6430/0CPWYR, BIOS A09 12/13/2012 [21795.371441] f8ec6748 f8ec6748 e51f3ce8 c168aa62 e51f3d10 c103a824 c1871238 f8ec6748 [21795.374228] 000003dd f8eb982e f8eb982e 00000000 c3408ed4 c41edbbc e51f3d20 c103a862 [21795.377006] 00000009 00000000 e51f3da8 f8eb982e c41ee3dc 00000004 e7970000 e51f3d74 [21795.379792] Call Trace: [21795.382461] [] dump_stack+0x16/0x18 [21795.385133] [] warn_slowpath_common+0x64/0x80 [21795.387803] [] ? __iwl_mvm_suspend.isra.6+0x2be/0x460 [iwlmvm] [21795.390485] [] ? __iwl_mvm_suspend.isra.6+0x2be/0x460 [iwlmvm] [21795.393124] [] warn_slowpath_null+0x22/0x30 [21795.395787] [] __iwl_mvm_suspend.isra.6+0x2be/0x460 [iwlmvm] [21795.398464] [] iwl_mvm_suspend+0xec/0x140 [iwlmvm] [21795.401127] [] ? del_timer_sync+0xa1/0xc0 [21795.403800] [] __ieee80211_suspend+0x1de/0xff0 [mac80211] [21795.406459] [] ? mutex_lock_nested+0x25d/0x350 [21795.409084] [] ? rtnl_lock+0x14/0x20 [21795.411685] [] ieee80211_suspend+0x16/0x20 [mac80211] [21795.414318] [] wiphy_suspend+0x74/0x710 [cfg80211] [21795.416916] [] __device_suspend+0x1e2/0x220 [21795.419521] [] ? addresses_show+0xa0/0xa0 [cfg80211] [21795.422097] [] dpm_suspend+0x67/0x210 [21795.424661] [] dpm_suspend_start+0x4f/0x60 [21795.427219] [] suspend_devices_and_enter+0x60/0x480 [21795.429768] [] ? printk+0x4d/0x4f [21795.432295] [] pm_suspend+0x176/0x210 [21795.434830] [] state_store+0x5d/0xb0 [21795.437410] [] ? wakeup_count_show+0x50/0x50 [21795.439961] [] kobj_attr_store+0x1b/0x30 [21795.442514] [] sysfs_write_file+0xab/0x100 [21795.445088] [] ? sysfs_poll+0xa0/0xa0 [21795.447659] [] vfs_write+0xa5/0x1c0 [21795.450212] [] SyS_write+0x57/0xa0 [21795.452699] [] sysenter_do_call+0x12/0x32 [21795.455146] ---[ end trace faf5321baba2bfdb ]--- To fix this, call the iwl_mvm_free_nd() function in case of any error during resume. Additionally, rename the "out_unlock" label to err to make it clearer that it's only called in error conditions. Cc: stable@vger.kernel.org [3.19+] Signed-off-by: Luciano Coelho Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/d3.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c index 91ca8df007f7..4310cf102d78 100644 --- a/drivers/net/wireless/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/iwlwifi/mvm/d3.c @@ -1870,15 +1870,15 @@ static int __iwl_mvm_resume(struct iwl_mvm *mvm, bool test) /* get the BSS vif pointer again */ vif = iwl_mvm_get_bss_vif(mvm); if (IS_ERR_OR_NULL(vif)) - goto out_unlock; + goto err; ret = iwl_trans_d3_resume(mvm->trans, &d3_status, test); if (ret) - goto out_unlock; + goto err; if (d3_status != IWL_D3_STATUS_ALIVE) { IWL_INFO(mvm, "Device was reset during suspend\n"); - goto out_unlock; + goto err; } /* query SRAM first in case we want event logging */ @@ -1904,7 +1904,8 @@ static int __iwl_mvm_resume(struct iwl_mvm *mvm, bool test) goto out_iterate; } - out_unlock: +err: + iwl_mvm_free_nd(mvm); mutex_unlock(&mvm->mutex); out_iterate: From 292208914d8ca5a41cf68c2f1d2810a2ea2044e9 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 14 Apr 2015 11:36:23 +0300 Subject: [PATCH 207/337] iwlwifi: mvm: avoid use-after-free on iwl_mvm_d0i3_enable_tx() qos_seq points (to a struct) inside the command response data. Make sure to free the response only after qos_seq is not needed anymore. Reported-by: Heng Luo Signed-off-by: Eliad Peller Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/ops.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c index 1c66297d82c0..2ea01238754e 100644 --- a/drivers/net/wireless/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/iwlwifi/mvm/ops.c @@ -1263,11 +1263,13 @@ static void iwl_mvm_d0i3_exit_work(struct work_struct *wk) ieee80211_iterate_active_interfaces( mvm->hw, IEEE80211_IFACE_ITER_NORMAL, iwl_mvm_d0i3_disconnect_iter, mvm); - - iwl_free_resp(&get_status_cmd); out: iwl_mvm_d0i3_enable_tx(mvm, qos_seq); + /* qos_seq might point inside resp_pkt, so free it only now */ + if (get_status_cmd.resp_pkt) + iwl_free_resp(&get_status_cmd); + /* the FW might have updated the regdomain */ iwl_mvm_update_changed_regdom(mvm); From c78e1746d3ad7d548bdf3fe491898cc453911a49 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Wed, 20 May 2015 17:13:33 +0200 Subject: [PATCH 208/337] net: sched: fix call_rcu() race on classifier module unloads Vijay reported that a loop as simple as ... while true; do tc qdisc add dev foo root handle 1: prio tc filter add dev foo parent 1: u32 match u32 0 0 flowid 1 tc qdisc del dev foo root rmmod cls_u32 done ... will panic the kernel. Moreover, he bisected the change apparently introducing it to 78fd1d0ab072 ("netlink: Re-add locking to netlink_lookup() and seq walker"). The removal of synchronize_net() from the netlink socket triggering the qdisc to be removed, seems to have uncovered an RCU resp. module reference count race from the tc API. Given that RCU conversion was done after e341694e3eb5 ("netlink: Convert netlink_lookup() to use RCU protected hash table") which added the synchronize_net() originally, occasion of hitting the bug was less likely (not impossible though): When qdiscs that i) support attaching classifiers and, ii) have at least one of them attached, get deleted, they invoke tcf_destroy_chain(), and thus call into ->destroy() handler from a classifier module. After RCU conversion, all classifier that have an internal prio list, unlink them and initiate freeing via call_rcu() deferral. Meanhile, tcf_destroy() releases already reference to the tp->ops->owner module before the queued RCU callback handler has been invoked. Subsequent rmmod on the classifier module is then not prevented since all module references are already dropped. By the time, the kernel invokes the RCU callback handler from the module, that function address is then invalid. One way to fix it would be to add an rcu_barrier() to unregister_tcf_proto_ops() to wait for all pending call_rcu()s to complete. synchronize_rcu() is not appropriate as under heavy RCU callback load, registered call_rcu()s could be deferred longer than a grace period. In case we don't have any pending call_rcu()s, the barrier is allowed to return immediately. Since we came here via unregister_tcf_proto_ops(), there are no users of a given classifier anymore. Further nested call_rcu()s pointing into the module space are not being done anywhere. Only cls_bpf_delete_prog() may schedule a work item, to unlock pages eventually, but that is not in the range/context of cls_bpf anymore. Fixes: 25d8c0d55f24 ("net: rcu-ify tcf_proto") Fixes: 9888faefe132 ("net: sched: cls_basic use RCU") Reported-by: Vijay Subramanian Signed-off-by: Daniel Borkmann Cc: John Fastabend Cc: Eric Dumazet Cc: Thomas Graf Cc: Jamal Hadi Salim Cc: Alexei Starovoitov Tested-by: Vijay Subramanian Acked-by: Alexei Starovoitov Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/sched/cls_api.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index b6ef9a04de06..a75864d93142 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -81,6 +81,11 @@ int unregister_tcf_proto_ops(struct tcf_proto_ops *ops) struct tcf_proto_ops *t; int rc = -ENOENT; + /* Wait for outstanding call_rcu()s, if any, from a + * tcf_proto_ops's destroy() handler. + */ + rcu_barrier(); + write_lock(&cls_mod_lock); list_for_each_entry(t, &tcf_proto_base, head) { if (t == ops) { From 15397f153cfd69c2164c1fa593e26707ed1a3e72 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Wed, 20 May 2015 14:50:30 -0700 Subject: [PATCH 209/337] Input: joydev - don't classify the vmmouse as a joystick Joydev is currently thinking some absolute mice are joystick, and that messes up games in VMware guests, as the cursor typically gets stuck in the top left corner. Try to detect the event signature of a VMmouse input device and back off for such devices. We're still incorrectly detecting, for example, the VMware absolute USB mouse as a joystick, but adding an event signature matching also that device would be considerably more risky, so defer that to a later merge window. Signed-off-by: Thomas Hellstrom Signed-off-by: Dmitry Torokhov --- drivers/input/joydev.c | 61 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index f362883c94e3..1d247bcf2ae2 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -747,6 +747,63 @@ static void joydev_cleanup(struct joydev *joydev) input_close_device(handle); } +static bool joydev_dev_is_absolute_mouse(struct input_dev *dev) +{ + DECLARE_BITMAP(jd_scratch, KEY_CNT); + + BUILD_BUG_ON(ABS_CNT > KEY_CNT || EV_CNT > KEY_CNT); + + /* + * Virtualization (VMware, etc) and remote management (HP + * ILO2) solutions use absolute coordinates for their virtual + * pointing devices so that there is one-to-one relationship + * between pointer position on the host screen and virtual + * guest screen, and so their mice use ABS_X, ABS_Y and 3 + * primary button events. This clashes with what joydev + * considers to be joysticks (a device with at minimum ABS_X + * axis). + * + * Here we are trying to separate absolute mice from + * joysticks. A device is, for joystick detection purposes, + * considered to be an absolute mouse if the following is + * true: + * + * 1) Event types are exactly EV_ABS, EV_KEY and EV_SYN. + * 2) Absolute events are exactly ABS_X and ABS_Y. + * 3) Keys are exactly BTN_LEFT, BTN_RIGHT and BTN_MIDDLE. + * 4) Device is not on "Amiga" bus. + */ + + bitmap_zero(jd_scratch, EV_CNT); + __set_bit(EV_ABS, jd_scratch); + __set_bit(EV_KEY, jd_scratch); + __set_bit(EV_SYN, jd_scratch); + if (!bitmap_equal(jd_scratch, dev->evbit, EV_CNT)) + return false; + + bitmap_zero(jd_scratch, ABS_CNT); + __set_bit(ABS_X, jd_scratch); + __set_bit(ABS_Y, jd_scratch); + if (!bitmap_equal(dev->absbit, jd_scratch, ABS_CNT)) + return false; + + bitmap_zero(jd_scratch, KEY_CNT); + __set_bit(BTN_LEFT, jd_scratch); + __set_bit(BTN_RIGHT, jd_scratch); + __set_bit(BTN_MIDDLE, jd_scratch); + + if (!bitmap_equal(dev->keybit, jd_scratch, KEY_CNT)) + return false; + + /* + * Amiga joystick (amijoy) historically uses left/middle/right + * button events. + */ + if (dev->id.bustype == BUS_AMIGA) + return false; + + return true; +} static bool joydev_match(struct input_handler *handler, struct input_dev *dev) { @@ -758,6 +815,10 @@ static bool joydev_match(struct input_handler *handler, struct input_dev *dev) if (test_bit(EV_KEY, dev->evbit) && test_bit(BTN_DIGI, dev->keybit)) return false; + /* Avoid absolute mice */ + if (joydev_dev_is_absolute_mouse(dev)) + return false; + return true; } From e686e9e156109cd2475196689a3144d91cf354b3 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 7 May 2015 22:24:58 -0700 Subject: [PATCH 210/337] Input: smtpe-ts - use msecs_to_jiffies() instead of HZ Use msecs_to_jiffies(20) instead of plain (HZ / 50), as the former is much more explicit about it's behavior. We want to schedule the task 20 mS from now, so make it explicit in the code. Signed-off-by: Marek Vasut Reviewed-by: Viresh Kumar Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/stmpe-ts.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c index 2d5ff86b343f..702ad200d916 100644 --- a/drivers/input/touchscreen/stmpe-ts.c +++ b/drivers/input/touchscreen/stmpe-ts.c @@ -164,7 +164,7 @@ static irqreturn_t stmpe_ts_handler(int irq, void *data) STMPE_TSC_CTRL_TSC_EN, STMPE_TSC_CTRL_TSC_EN); /* start polling for touch_det to detect release */ - schedule_delayed_work(&ts->work, HZ / 50); + schedule_delayed_work(&ts->work, msecs_to_jiffies(20)); return IRQ_HANDLED; } From 77b071e7931dd762563ac74e3e448b2aef23ad2f Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 7 May 2015 22:25:49 -0700 Subject: [PATCH 211/337] Input: smtpe-ts - wait 50mS until polling for pen-up Wait a little bit longer, 50mS instead of 20mS, until the driver starts polling for pen-up. The problematic behavior before this patch is applied is as follows. The behavior was observed on the STMPE610QTR controller. Upon a physical pen-down event, the touchscreen reports one set of x-y-p coordinates and a pen-down event. After that, the pen-up polling is triggered and since the controller is not ready yet, the polling mistakenly detects a pen-up event while the physical state is still such that the pen is down on the touch surface. The pen-up handling flushes the controller FIFO, so after that, all the samples in the controller are discarded. The controller becomes ready shortly after this bogus pen-up handling and does generate again a pen-down interrupt. This time, the controller contains x-y-p samples which all read as zero. Since pressure value is zero, this set of samples is effectively ignored by userland. In the end, the driver just bounces between pen-down and bogus pen-up handling, generating no useful results. Fix this by giving the controller a bit more time before polling it for pen-up. Signed-off-by: Marek Vasut Reviewed-by: Viresh Kumar Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/stmpe-ts.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c index 702ad200d916..e4c31256a74d 100644 --- a/drivers/input/touchscreen/stmpe-ts.c +++ b/drivers/input/touchscreen/stmpe-ts.c @@ -164,7 +164,7 @@ static irqreturn_t stmpe_ts_handler(int irq, void *data) STMPE_TSC_CTRL_TSC_EN, STMPE_TSC_CTRL_TSC_EN); /* start polling for touch_det to detect release */ - schedule_delayed_work(&ts->work, msecs_to_jiffies(20)); + schedule_delayed_work(&ts->work, msecs_to_jiffies(50)); return IRQ_HANDLED; } From a1cae34e23b1293eccbcc8ee9b39298039c3952a Mon Sep 17 00:00:00 2001 From: Harald Freudenberger Date: Thu, 21 May 2015 10:01:11 +0200 Subject: [PATCH 212/337] crypto: s390/ghash - Fix incorrect ghash icv buffer handling. Multitheaded tests showed that the icv buffer in the current ghash implementation is not handled correctly. A move of this working ghash buffer value to the descriptor context fixed this. Code is tested and verified with an multithreaded application via af_alg interface. Cc: stable@vger.kernel.org Signed-off-by: Harald Freudenberger Signed-off-by: Gerald Schaefer Reported-by: Herbert Xu Signed-off-by: Herbert Xu --- arch/s390/crypto/ghash_s390.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/arch/s390/crypto/ghash_s390.c b/arch/s390/crypto/ghash_s390.c index 7940dc90e80b..b258110da952 100644 --- a/arch/s390/crypto/ghash_s390.c +++ b/arch/s390/crypto/ghash_s390.c @@ -16,11 +16,12 @@ #define GHASH_DIGEST_SIZE 16 struct ghash_ctx { - u8 icv[16]; - u8 key[16]; + u8 key[GHASH_BLOCK_SIZE]; }; struct ghash_desc_ctx { + u8 icv[GHASH_BLOCK_SIZE]; + u8 key[GHASH_BLOCK_SIZE]; u8 buffer[GHASH_BLOCK_SIZE]; u32 bytes; }; @@ -28,8 +29,10 @@ struct ghash_desc_ctx { static int ghash_init(struct shash_desc *desc) { struct ghash_desc_ctx *dctx = shash_desc_ctx(desc); + struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm); memset(dctx, 0, sizeof(*dctx)); + memcpy(dctx->key, ctx->key, GHASH_BLOCK_SIZE); return 0; } @@ -45,7 +48,6 @@ static int ghash_setkey(struct crypto_shash *tfm, } memcpy(ctx->key, key, GHASH_BLOCK_SIZE); - memset(ctx->icv, 0, GHASH_BLOCK_SIZE); return 0; } @@ -54,7 +56,6 @@ static int ghash_update(struct shash_desc *desc, const u8 *src, unsigned int srclen) { struct ghash_desc_ctx *dctx = shash_desc_ctx(desc); - struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm); unsigned int n; u8 *buf = dctx->buffer; int ret; @@ -70,7 +71,7 @@ static int ghash_update(struct shash_desc *desc, src += n; if (!dctx->bytes) { - ret = crypt_s390_kimd(KIMD_GHASH, ctx, buf, + ret = crypt_s390_kimd(KIMD_GHASH, dctx, buf, GHASH_BLOCK_SIZE); if (ret != GHASH_BLOCK_SIZE) return -EIO; @@ -79,7 +80,7 @@ static int ghash_update(struct shash_desc *desc, n = srclen & ~(GHASH_BLOCK_SIZE - 1); if (n) { - ret = crypt_s390_kimd(KIMD_GHASH, ctx, src, n); + ret = crypt_s390_kimd(KIMD_GHASH, dctx, src, n); if (ret != n) return -EIO; src += n; @@ -94,7 +95,7 @@ static int ghash_update(struct shash_desc *desc, return 0; } -static int ghash_flush(struct ghash_ctx *ctx, struct ghash_desc_ctx *dctx) +static int ghash_flush(struct ghash_desc_ctx *dctx) { u8 *buf = dctx->buffer; int ret; @@ -104,24 +105,24 @@ static int ghash_flush(struct ghash_ctx *ctx, struct ghash_desc_ctx *dctx) memset(pos, 0, dctx->bytes); - ret = crypt_s390_kimd(KIMD_GHASH, ctx, buf, GHASH_BLOCK_SIZE); + ret = crypt_s390_kimd(KIMD_GHASH, dctx, buf, GHASH_BLOCK_SIZE); if (ret != GHASH_BLOCK_SIZE) return -EIO; + + dctx->bytes = 0; } - dctx->bytes = 0; return 0; } static int ghash_final(struct shash_desc *desc, u8 *dst) { struct ghash_desc_ctx *dctx = shash_desc_ctx(desc); - struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm); int ret; - ret = ghash_flush(ctx, dctx); + ret = ghash_flush(dctx); if (!ret) - memcpy(dst, ctx->icv, GHASH_BLOCK_SIZE); + memcpy(dst, dctx->icv, GHASH_BLOCK_SIZE); return ret; } From 2e7f43c41c042d6fed4d67aceeaae32d8f102e98 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 20 May 2015 10:36:32 +0200 Subject: [PATCH 213/337] drm/plane-helper: Adapt cursor hack to transitional helpers In commit f02ad907cd9e7fe3a6405d2d005840912f1ed258 Author: Daniel Vetter Date: Thu Jan 22 16:36:23 2015 +0100 drm/atomic-helpers: Recover full cursor plane behaviour we've added a hack to atomic helpers to never to vblank waits for cursor updates through the legacy apis since that's what X expects. Unfortunately we've (again) forgotten to adjust the transitional helpers. Do this now. This fixes regressions for drivers only partially converted over to atomic (like i915). Reported-by: Pekka Paalanen Cc: Pekka Paalanen Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter Reviewed-and-tested-by: Mario Kleiner Signed-off-by: Jani Nikula --- drivers/gpu/drm/drm_plane_helper.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/drm_plane_helper.c b/drivers/gpu/drm/drm_plane_helper.c index 40c1db9ad7c3..2f0ed11024eb 100644 --- a/drivers/gpu/drm/drm_plane_helper.c +++ b/drivers/gpu/drm/drm_plane_helper.c @@ -465,6 +465,9 @@ int drm_plane_helper_commit(struct drm_plane *plane, if (!crtc[i]) continue; + if (crtc[i]->cursor == plane) + continue; + /* There's no other way to figure out whether the crtc is running. */ ret = drm_crtc_vblank_get(crtc[i]); if (ret == 0) { From bd7413aef860baed78c76734050c1de4194ed61c Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Thu, 21 May 2015 21:55:42 +0200 Subject: [PATCH 214/337] ARM: pxa: pxa_cplds: signedness bug in probe "base_irq" needs to be signed for the error handling to work. Also we can remove the initialization because we re-assign it later. Fixes: aa8d6b73ea33 ('ARM: pxa: pxa_cplds: add lubbock and mainstone IO') Signed-off-by: Dan Carpenter Signed-off-by: Robert Jarzmik Signed-off-by: Arnd Bergmann --- arch/arm/mach-pxa/pxa_cplds_irqs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/pxa_cplds_irqs.c b/arch/arm/mach-pxa/pxa_cplds_irqs.c index f1aeb54fabe3..2385052b0ce1 100644 --- a/arch/arm/mach-pxa/pxa_cplds_irqs.c +++ b/arch/arm/mach-pxa/pxa_cplds_irqs.c @@ -107,7 +107,7 @@ static int cplds_probe(struct platform_device *pdev) struct resource *res; struct cplds *fpga; int ret; - unsigned int base_irq = 0; + int base_irq; unsigned long irqflags = 0; fpga = devm_kzalloc(&pdev->dev, sizeof(*fpga), GFP_KERNEL); From d654976cbf852ee20612ee10dbe57cdacda9f452 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 21 May 2015 21:51:19 -0700 Subject: [PATCH 215/337] tcp: fix a potential deadlock in tcp_get_info() Taking socket spinlock in tcp_get_info() can deadlock, as inet_diag_dump_icsk() holds the &hashinfo->ehash_locks[i], while packet processing can use the reverse locking order. We could avoid this locking for TCP_LISTEN states, but lockdep would certainly get confused as all TCP sockets share same lockdep classes. [ 523.722504] ====================================================== [ 523.728706] [ INFO: possible circular locking dependency detected ] [ 523.734990] 4.1.0-dbg-DEV #1676 Not tainted [ 523.739202] ------------------------------------------------------- [ 523.745474] ss/18032 is trying to acquire lock: [ 523.750002] (slock-AF_INET){+.-...}, at: [] tcp_get_info+0x2c4/0x360 [ 523.758129] [ 523.758129] but task is already holding lock: [ 523.763968] (&(&hashinfo->ehash_locks[i])->rlock){+.-...}, at: [] inet_diag_dump_icsk+0x1d5/0x6c0 [ 523.774661] [ 523.774661] which lock already depends on the new lock. [ 523.774661] [ 523.782850] [ 523.782850] the existing dependency chain (in reverse order) is: [ 523.790326] -> #1 (&(&hashinfo->ehash_locks[i])->rlock){+.-...}: [ 523.796599] [] lock_acquire+0xbb/0x270 [ 523.802565] [] _raw_spin_lock+0x38/0x50 [ 523.808628] [] __inet_hash_nolisten+0x78/0x110 [ 523.815273] [] tcp_v4_syn_recv_sock+0x24b/0x350 [ 523.822067] [] tcp_check_req+0x3c1/0x500 [ 523.828199] [] tcp_v4_do_rcv+0x239/0x3d0 [ 523.834331] [] tcp_v4_rcv+0xa8e/0xc10 [ 523.840202] [] ip_local_deliver_finish+0x133/0x3e0 [ 523.847214] [] ip_local_deliver+0xaa/0xc0 [ 523.853440] [] ip_rcv_finish+0x168/0x5c0 [ 523.859624] [] ip_rcv+0x307/0x420 Lets use u64_sync infrastructure instead. As a bonus, 64bit arches get optimized, as these are nop for them. Fixes: 0df48c26d841 ("tcp: add tcpi_bytes_acked to tcp_info") Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/tcp.h | 2 ++ net/ipv4/tcp.c | 11 +++++++---- net/ipv4/tcp_fastopen.c | 4 ++++ net/ipv4/tcp_input.c | 4 ++++ 4 files changed, 17 insertions(+), 4 deletions(-) diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 3b2911502a8c..e8bbf403618f 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -158,6 +158,8 @@ struct tcp_sock { * sum(delta(snd_una)), or how many bytes * were acked. */ + struct u64_stats_sync syncp; /* protects 64bit vars (cf tcp_get_info()) */ + u32 snd_una; /* First byte we want an ack for */ u32 snd_sml; /* Last byte of the most recently transmitted small packet */ u32 rcv_tstamp; /* timestamp of last received ACK (for keepalives) */ diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 46efa03d2b11..f1377f2a0472 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -402,6 +402,7 @@ void tcp_init_sock(struct sock *sk) tp->snd_ssthresh = TCP_INFINITE_SSTHRESH; tp->snd_cwnd_clamp = ~0; tp->mss_cache = TCP_MSS_DEFAULT; + u64_stats_init(&tp->syncp); tp->reordering = sysctl_tcp_reordering; tcp_enable_early_retrans(tp); @@ -2598,6 +2599,7 @@ void tcp_get_info(struct sock *sk, struct tcp_info *info) const struct tcp_sock *tp = tcp_sk(sk); const struct inet_connection_sock *icsk = inet_csk(sk); u32 now = tcp_time_stamp; + unsigned int start; u32 rate; memset(info, 0, sizeof(*info)); @@ -2665,10 +2667,11 @@ void tcp_get_info(struct sock *sk, struct tcp_info *info) rate = READ_ONCE(sk->sk_max_pacing_rate); info->tcpi_max_pacing_rate = rate != ~0U ? rate : ~0ULL; - spin_lock_bh(&sk->sk_lock.slock); - info->tcpi_bytes_acked = tp->bytes_acked; - info->tcpi_bytes_received = tp->bytes_received; - spin_unlock_bh(&sk->sk_lock.slock); + do { + start = u64_stats_fetch_begin_irq(&tp->syncp); + info->tcpi_bytes_acked = tp->bytes_acked; + info->tcpi_bytes_received = tp->bytes_received; + } while (u64_stats_fetch_retry_irq(&tp->syncp, start)); } EXPORT_SYMBOL_GPL(tcp_get_info); diff --git a/net/ipv4/tcp_fastopen.c b/net/ipv4/tcp_fastopen.c index 3c673d5e6cff..46b087a27503 100644 --- a/net/ipv4/tcp_fastopen.c +++ b/net/ipv4/tcp_fastopen.c @@ -206,6 +206,10 @@ static bool tcp_fastopen_create_child(struct sock *sk, skb_set_owner_r(skb2, child); __skb_queue_tail(&child->sk_receive_queue, skb2); tp->syn_data_acked = 1; + + /* u64_stats_update_begin(&tp->syncp) not needed here, + * as we certainly are not changing upper 32bit value (0) + */ tp->bytes_received = end_seq - TCP_SKB_CB(skb)->seq - 1; } else { end_seq = TCP_SKB_CB(skb)->seq + 1; diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 243d674b3ef5..c9ab964189a0 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -3286,7 +3286,9 @@ static void tcp_snd_una_update(struct tcp_sock *tp, u32 ack) { u32 delta = ack - tp->snd_una; + u64_stats_update_begin(&tp->syncp); tp->bytes_acked += delta; + u64_stats_update_end(&tp->syncp); tp->snd_una = ack; } @@ -3295,7 +3297,9 @@ static void tcp_rcv_nxt_update(struct tcp_sock *tp, u32 seq) { u32 delta = seq - tp->rcv_nxt; + u64_stats_update_begin(&tp->syncp); tp->bytes_received += delta; + u64_stats_update_end(&tp->syncp); tp->rcv_nxt = seq; } From 381c759d9916c42959515ad34a6d467e24a88e93 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Fri, 22 May 2015 04:58:12 -0500 Subject: [PATCH 216/337] ipv4: Avoid crashing in ip_error ip_error does not check if in_dev is NULL before dereferencing it. IThe following sequence of calls is possible: CPU A CPU B ip_rcv_finish ip_route_input_noref() ip_route_input_slow() inetdev_destroy() dst_input() With the result that a network device can be destroyed while processing an input packet. A crash was triggered with only unicast packets in flight, and forwarding enabled on the only network device. The error condition was created by the removal of the network device. As such it is likely the that error code was -EHOSTUNREACH, and the action taken by ip_error (if in_dev had been accessible) would have been to not increment any counters and to have tried and likely failed to send an icmp error as the network device is going away. Therefore handle this weird case by just dropping the packet if !in_dev. It will result in dropping the packet sooner, and will not result in an actual change of behavior. Fixes: 251da4130115b ("ipv4: Cache ip_error() routes even when not forwarding.") Reported-by: Vittorio Gambaletta Tested-by: Vittorio Gambaletta Signed-off-by: Vittorio Gambaletta Signed-off-by: "Eric W. Biederman" Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/route.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index bff62fc87b8e..f45f2a12f37b 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -902,6 +902,10 @@ static int ip_error(struct sk_buff *skb) bool send; int code; + /* IP on this device is disabled. */ + if (!in_dev) + goto out; + net = dev_net(rt->dst.dev); if (!IN_DEV_FORWARD(in_dev)) { switch (rt->dst.error) { From 44f6731d8b68fa02f5ed65eaceac41f8c3c9279e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 22 May 2015 13:15:22 +0200 Subject: [PATCH 217/337] cdc_ncm: Fix tx_bytes statistics MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The tx_curr_frame_payload field is u32. When we try to calculate a small negative delta based on it, we end up with a positive integer close to 2^32 instead. So the tx_bytes pointer increases by about 2^32 for every transmitted frame. Fix by calculating the delta as a signed long. Cc: Ben Hutchings Reported-by: Florian Bruhin Fixes: 7a1e890e2168 ("usbnet: Fix tx_bytes statistic running backward in cdc_ncm") Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ncm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index c3e4da9e79ca..8067b8fbb0ee 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -1182,7 +1182,7 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign) * payload data instead. */ usbnet_set_skb_tx_stats(skb_out, n, - ctx->tx_curr_frame_payload - skb_out->len); + (long)ctx->tx_curr_frame_payload - skb_out->len); return skb_out; From d4e64c2909231222ceba0999d921e7ac8908f656 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michal=20Kube=C4=8Dek?= Date: Fri, 22 May 2015 13:40:09 +0200 Subject: [PATCH 218/337] ipv4: fill in table id when replacing a route When replacing an IPv4 route, tb_id member of the new fib_alias structure is not set in the replace code path so that the new route is ignored. Fixes: 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse") Signed-off-by: Michal Kubecek Acked-by: Alexander Duyck Signed-off-by: David S. Miller --- net/ipv4/fib_trie.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index 64c2076ced54..09b62e17dd8c 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -1164,6 +1164,7 @@ int fib_table_insert(struct fib_table *tb, struct fib_config *cfg) state = fa->fa_state; new_fa->fa_state = state & ~FA_S_ACCESSED; new_fa->fa_slen = fa->fa_slen; + new_fa->tb_id = tb->tb_id; err = netdev_switch_fib_ipv4_add(key, plen, fi, new_fa->fa_tos, From 6db99596d11a99f59e8f8f9353b22ef76e31ad6a Mon Sep 17 00:00:00 2001 From: Nathan Sullivan Date: Fri, 22 May 2015 09:22:09 -0500 Subject: [PATCH 219/337] net: macb: Document zynq gem dt binding Signed-off-by: Nathan Sullivan Acked-by: Nicolas Ferre Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/cdns-emac.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/cdns-emac.txt b/Documentation/devicetree/bindings/net/cdns-emac.txt index abd67c13d344..4451ee973223 100644 --- a/Documentation/devicetree/bindings/net/cdns-emac.txt +++ b/Documentation/devicetree/bindings/net/cdns-emac.txt @@ -3,7 +3,8 @@ Required properties: - compatible: Should be "cdns,[-]{emac}" Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC. - or the generic form: "cdns,emac". + Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC. + Or the generic form: "cdns,emac". - reg: Address and length of the register set for the device - interrupts: Should contain macb interrupt - phy-mode: see ethernet.txt file in the same directory. From 222ca8e0c183309081bdb0fd5827fc2a922be3ad Mon Sep 17 00:00:00 2001 From: Nathan Sullivan Date: Fri, 22 May 2015 09:22:10 -0500 Subject: [PATCH 220/337] net: macb: Disable half duplex gigabit on Zynq According to the Zynq TRM, gigabit half duplex is not supported. Add a new cap and compatible string so Zynq can avoid advertising that mode. Signed-off-by: Nathan Sullivan Acked-by: Nicolas Ferre Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb.c | 12 ++++++++++++ drivers/net/ethernet/cadence/macb.h | 1 + 2 files changed, 13 insertions(+) diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index 5f10dfc631d7..fc646a41d548 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -350,6 +350,9 @@ static int macb_mii_probe(struct net_device *dev) else phydev->supported &= PHY_BASIC_FEATURES; + if (bp->caps & MACB_CAPS_NO_GIGABIT_HALF) + phydev->supported &= ~SUPPORTED_1000baseT_Half; + phydev->advertising = phydev->supported; bp->link = 0; @@ -2699,6 +2702,14 @@ static const struct macb_config emac_config = { .init = at91ether_init, }; +static const struct macb_config zynq_config = { + .caps = MACB_CAPS_SG_DISABLED | MACB_CAPS_GIGABIT_MODE_AVAILABLE | + MACB_CAPS_NO_GIGABIT_HALF, + .dma_burst_length = 16, + .clk_init = macb_clk_init, + .init = macb_init, +}; + static const struct of_device_id macb_dt_ids[] = { { .compatible = "cdns,at32ap7000-macb" }, { .compatible = "cdns,at91sam9260-macb", .data = &at91sam9260_config }, @@ -2709,6 +2720,7 @@ static const struct of_device_id macb_dt_ids[] = { { .compatible = "atmel,sama5d4-gem", .data = &sama5d4_config }, { .compatible = "cdns,at91rm9200-emac", .data = &emac_config }, { .compatible = "cdns,emac", .data = &emac_config }, + { .compatible = "cdns,zynq-gem", .data = &zynq_config }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, macb_dt_ids); diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h index eb7d76f7bf6a..24b1d9bcd865 100644 --- a/drivers/net/ethernet/cadence/macb.h +++ b/drivers/net/ethernet/cadence/macb.h @@ -393,6 +393,7 @@ #define MACB_CAPS_ISR_CLEAR_ON_WRITE 0x00000001 #define MACB_CAPS_USRIO_HAS_CLKEN 0x00000002 #define MACB_CAPS_USRIO_DEFAULT_IS_MII 0x00000004 +#define MACB_CAPS_NO_GIGABIT_HALF 0x00000008 #define MACB_CAPS_FIFO_MODE 0x10000000 #define MACB_CAPS_GIGABIT_MODE_AVAILABLE 0x20000000 #define MACB_CAPS_SG_DISABLED 0x40000000 From 9eeb5161397a54580a630c99841b5badb07cf246 Mon Sep 17 00:00:00 2001 From: Nathan Sullivan Date: Fri, 22 May 2015 09:22:11 -0500 Subject: [PATCH 221/337] ARM: zynq: DT: Use the zynq binding with macb Use the new zynq binding for macb ethernet, since it will disable half duplex gigabit like the Zynq TRM says to do. Signed-off-by: Nathan Sullivan Signed-off-by: David S. Miller --- arch/arm/boot/dts/zynq-7000.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index a5cd2eda3edf..9ea54b3dba09 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -193,7 +193,7 @@ }; gem0: ethernet@e000b000 { - compatible = "cdns,gem"; + compatible = "cdns,zynq-gem"; reg = <0xe000b000 0x1000>; status = "disabled"; interrupts = <0 22 4>; @@ -204,7 +204,7 @@ }; gem1: ethernet@e000c000 { - compatible = "cdns,gem"; + compatible = "cdns,zynq-gem"; reg = <0xe000c000 0x1000>; status = "disabled"; interrupts = <0 45 4>; From 47cc84ce0c2fe75c99ea5963c4b5704dd78ead54 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Fri, 22 May 2015 12:18:59 -0300 Subject: [PATCH 222/337] bridge: fix parsing of MLDv2 reports When more than a multicast address is present in a MLDv2 report, all but the first address is ignored, because the code breaks out of the loop if there has not been an error adding that address. This has caused failures when two guests connected through the bridge tried to communicate using IPv6. Neighbor discoveries would not be transmitted to the other guest when both used a link-local address and a static address. This only happens when there is a MLDv2 querier in the network. The fix will only break out of the loop when there is a failure adding a multicast address. The mdb before the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::2 temp After the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::fb temp dev ovirtmgmt port bond0.86 grp ff02::2 temp dev ovirtmgmt port bond0.86 grp ff02::d temp dev ovirtmgmt port vnet0 grp ff02::1:ff00:76 temp dev ovirtmgmt port bond0.86 grp ff02::16 temp dev ovirtmgmt port vnet1 grp ff02::1:ff00:77 temp dev ovirtmgmt port bond0.86 grp ff02::1:ff00:def temp dev ovirtmgmt port bond0.86 grp ff02::1:ffa1:40bf temp Fixes: 08b202b67264 ("bridge br_multicast: IPv6 MLD support.") Reported-by: Rik Theys Signed-off-by: Thadeu Lima de Souza Cascardo Tested-by: Rik Theys Signed-off-by: David S. Miller --- net/bridge/br_multicast.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 4b6722f8f179..a3abe6ed111e 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -1072,7 +1072,7 @@ static int br_ip6_multicast_mld2_report(struct net_bridge *br, err = br_ip6_multicast_add_group(br, port, &grec->grec_mca, vid); - if (!err) + if (err) break; } From f96dee13b8e10f00840124255bed1d8b4c6afd6f Mon Sep 17 00:00:00 2001 From: Arun Parameswaran Date: Wed, 20 May 2015 14:35:30 -0700 Subject: [PATCH 223/337] net: core: 'ethtool' issue with querying phy settings When trying to configure the settings for PHY1, using commands like 'ethtool -s eth0 phyad 1 speed 100', the 'ethtool' seems to modify other settings apart from the speed of the PHY1, in the above case. The ethtool seems to query the settings for PHY0, and use this as the base to apply the new settings to the PHY1. This is causing the other settings of the PHY 1 to be wrongly configured. The issue is caused by the '_ethtool_get_settings()' API, which gets called because of the 'ETHTOOL_GSET' command, is clearing the 'cmd' pointer (of type 'struct ethtool_cmd') by calling memset. This clears all the parameters (if any) passed for the 'ETHTOOL_GSET' cmd. So the driver's callback is always invoked with 'cmd->phy_address' as '0'. The '_ethtool_get_settings()' is called from other files in the 'net/core'. So the fix is applied to the 'ethtool_get_settings()' which is only called in the context of the 'ethtool'. Signed-off-by: Arun Parameswaran Reviewed-by: Ray Jui Reviewed-by: Scott Branden Signed-off-by: David S. Miller --- net/core/ethtool.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/net/core/ethtool.c b/net/core/ethtool.c index 1d00b8922902..1347e11f5cc9 100644 --- a/net/core/ethtool.c +++ b/net/core/ethtool.c @@ -359,7 +359,15 @@ static int ethtool_get_settings(struct net_device *dev, void __user *useraddr) int err; struct ethtool_cmd cmd; - err = __ethtool_get_settings(dev, &cmd); + if (!dev->ethtool_ops->get_settings) + return -EOPNOTSUPP; + + if (copy_from_user(&cmd, useraddr, sizeof(cmd))) + return -EFAULT; + + cmd.cmd = ETHTOOL_GSET; + + err = dev->ethtool_ops->get_settings(dev, &cmd); if (err < 0) return err; From 93a33a584e2a49a217118148125944fd02d47b54 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 21 May 2015 13:28:29 -0700 Subject: [PATCH 224/337] bridge: fix lockdep splat Following lockdep splat was reported : [ 29.382286] =============================== [ 29.382315] [ INFO: suspicious RCU usage. ] [ 29.382344] 4.1.0-0.rc0.git11.1.fc23.x86_64 #1 Not tainted [ 29.382380] ------------------------------- [ 29.382409] net/bridge/br_private.h:626 suspicious rcu_dereference_check() usage! [ 29.382455] other info that might help us debug this: [ 29.382507] rcu_scheduler_active = 1, debug_locks = 0 [ 29.382549] 2 locks held by swapper/0/0: [ 29.382576] #0: (((&p->forward_delay_timer))){+.-...}, at: [] call_timer_fn+0x5/0x4f0 [ 29.382660] #1: (&(&br->lock)->rlock){+.-...}, at: [] br_forward_delay_timer_expired+0x31/0x140 [bridge] [ 29.382754] stack backtrace: [ 29.382787] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.1.0-0.rc0.git11.1.fc23.x86_64 #1 [ 29.382838] Hardware name: LENOVO 422916G/LENOVO, BIOS A1KT53AUS 04/07/2015 [ 29.382882] 0000000000000000 3ebfc20364115825 ffff880666603c48 ffffffff81892d4b [ 29.382943] 0000000000000000 ffffffff81e124e0 ffff880666603c78 ffffffff8110bcd7 [ 29.383004] ffff8800785c9d00 ffff88065485ac58 ffff880c62002800 ffff880c5fc88ac0 [ 29.383065] Call Trace: [ 29.383084] [] dump_stack+0x4c/0x65 [ 29.383130] [] lockdep_rcu_suspicious+0xe7/0x120 [ 29.383178] [] br_fill_ifinfo+0x4a9/0x6a0 [bridge] [ 29.383225] [] br_ifinfo_notify+0x11b/0x4b0 [bridge] [ 29.383271] [] ? br_hold_timer_expired+0x70/0x70 [bridge] [ 29.383320] [] br_forward_delay_timer_expired+0x58/0x140 [bridge] [ 29.383371] [] ? br_hold_timer_expired+0x70/0x70 [bridge] [ 29.383416] [] call_timer_fn+0xc3/0x4f0 [ 29.383454] [] ? call_timer_fn+0x5/0x4f0 [ 29.383493] [] ? lock_release_holdtime.part.29+0xf/0x200 [ 29.383541] [] ? br_hold_timer_expired+0x70/0x70 [bridge] [ 29.383587] [] run_timer_softirq+0x244/0x490 [ 29.383629] [] __do_softirq+0xec/0x670 [ 29.383666] [] irq_exit+0x145/0x150 [ 29.383703] [] smp_apic_timer_interrupt+0x46/0x60 [ 29.383744] [] apic_timer_interrupt+0x73/0x80 [ 29.383782] [] ? cpuidle_enter_state+0x5f/0x2f0 [ 29.383832] [] ? cpuidle_enter_state+0x5b/0x2f0 Problem here is that br_forward_delay_timer_expired() is a timer handler, calling br_ifinfo_notify() which assumes either rcu_read_lock() or RTNL are held. Simplest fix seems to add rcu read lock section. Signed-off-by: Eric Dumazet Reported-by: Josh Boyer Reported-by: Dominick Grift Cc: Vlad Yasevich Signed-off-by: David S. Miller --- net/bridge/br_stp_timer.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/bridge/br_stp_timer.c b/net/bridge/br_stp_timer.c index 4fcaa67750fd..7caf7fae2d5b 100644 --- a/net/bridge/br_stp_timer.c +++ b/net/bridge/br_stp_timer.c @@ -97,7 +97,9 @@ static void br_forward_delay_timer_expired(unsigned long arg) netif_carrier_on(br->dev); } br_log_state(p); + rcu_read_lock(); br_ifinfo_notify(RTM_NEWLINK, p); + rcu_read_unlock(); spin_unlock(&br->lock); } From 242ddf04297f2c4768bd8eb7593ab911910c5f76 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Sat, 23 May 2015 11:46:55 +0900 Subject: [PATCH 225/337] ARM: dts: set display clock correctly for exynos4412-trats2 This patch sets display clock correctly. If Display clock isn't set correctly then you would find below messages and Display controller doesn't work correctly. exynos-drm: No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 Fixes: abc0b1447d49 ("drm: Perform basic sanity checks on probed modes") Cc: Signed-off-by: Inki Dae Reviewed-by: Krzysztof Kozlowski Tested-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4412-trats2.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 173ffa479ad3..792394dd0f2a 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -736,7 +736,7 @@ display-timings { timing-0 { - clock-frequency = <0>; + clock-frequency = <57153600>; hactive = <720>; vactive = <1280>; hfront-porch = <5>; From ae425bb2a05bebe786a25cc8ae64e9d16c4d9b83 Mon Sep 17 00:00:00 2001 From: "Vittorio G (VittGam)" Date: Fri, 22 May 2015 21:15:19 +0200 Subject: [PATCH 226/337] ALSA: usb-audio: Add quirk for MS LifeCam HD-3000 Microsoft LifeCam HD-3000 (045e:0779) needs a similar quirk for suppressing the unsupported sample rate inquiry. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98481 Cc: Signed-off-by: Vittorio Gambaletta Signed-off-by: Takashi Iwai --- sound/usb/quirks.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 46facfc9aec1..29175346cc4f 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1118,6 +1118,7 @@ bool snd_usb_get_sample_rate_quirk(struct snd_usb_audio *chip) case USB_ID(0x045E, 0x075D): /* MS Lifecam Cinema */ case USB_ID(0x045E, 0x076D): /* MS Lifecam HD-5000 */ case USB_ID(0x045E, 0x0772): /* MS Lifecam Studio */ + case USB_ID(0x045E, 0x0779): /* MS Lifecam HD-3000 */ case USB_ID(0x04D8, 0xFEEA): /* Benchmark DAC1 Pre */ return true; } From 3530febb5c7636f6b26d15637f68296804d26491 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 24 May 2015 08:27:52 +0200 Subject: [PATCH 227/337] Revert "ALSA: hda - Add mute-LED mode control to Thinkpad" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 7290006d8c0900c56d8c58428134f02c35109d17. Through the regression report, it was revealed that the tpacpi_led_set() call to thinkpad_acpi helper doesn't only toggle the mute LED but actually mutes the sound. This is contradiction to the expectation, and rather confuses user. According to Henrique, it's not trivial to judge which TP model behaves "LED-only" and which model does whatever more intrusive, as Lenovo's implementations vary model by model. So, from the safety reason, we should revert the patch for now. Reported-by: Martin Steigerwald Cc: Pali Rohár Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/thinkpad_helper.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/pci/hda/thinkpad_helper.c b/sound/pci/hda/thinkpad_helper.c index d51703e30523..0a4ad5feb82e 100644 --- a/sound/pci/hda/thinkpad_helper.c +++ b/sound/pci/hda/thinkpad_helper.c @@ -72,7 +72,6 @@ static void hda_fixup_thinkpad_acpi(struct hda_codec *codec, if (led_set_func(TPACPI_LED_MUTE, false) >= 0) { old_vmaster_hook = spec->vmaster_mute.hook; spec->vmaster_mute.hook = update_tpacpi_mute_led; - spec->vmaster_mute_enum = 1; removefunc = false; } if (led_set_func(TPACPI_LED_MICMUTE, false) >= 0) { From ba155e2d21f6bf05de86a78dbe5bfd8757604a65 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 24 May 2015 18:22:35 -0700 Subject: [PATCH 228/337] Linux 4.1-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index dc20bcb9b271..92a707859205 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 1 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Hurr durr I'ma sheep # *DOCUMENTATION* From cc4a84c3da6f9dd6a297dc81fe4437643a60fe03 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 22 May 2015 14:07:30 -0700 Subject: [PATCH 229/337] net: phy: bcm7xxx: Fix 7425 PHY ID and flags While adding support for 7425 PHY in the 7xxx PHY driver, the ID that was used was actually coming from an external PHY: a BCM5461x. Fix this by using the proper ID for the internal 7425 PHY and set the PHY_IS_INTERNAL flag, otherwise consumers of this PHY driver would not be able to properly identify it as such. Fixes: d068b02cfdfc2 ("net: phy: add BCM7425 and BCM7429 PHYs") Signed-off-by: Florian Fainelli Reviewed-by: Petri Gynther Signed-off-by: David S. Miller --- drivers/net/phy/bcm7xxx.c | 2 +- include/linux/brcmphy.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c index 64c74c6a4828..b5dc59de094e 100644 --- a/drivers/net/phy/bcm7xxx.c +++ b/drivers/net/phy/bcm7xxx.c @@ -404,7 +404,7 @@ static struct phy_driver bcm7xxx_driver[] = { .name = "Broadcom BCM7425", .features = PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause, - .flags = 0, + .flags = PHY_IS_INTERNAL, .config_init = bcm7xxx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index ae2982c0f7a6..656da2a12ffe 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -17,7 +17,7 @@ #define PHY_ID_BCM7250 0xae025280 #define PHY_ID_BCM7364 0xae025260 #define PHY_ID_BCM7366 0x600d8490 -#define PHY_ID_BCM7425 0x03625e60 +#define PHY_ID_BCM7425 0x600d86b0 #define PHY_ID_BCM7429 0x600d8730 #define PHY_ID_BCM7439 0x600d8480 #define PHY_ID_BCM7439_2 0xae025080 From 3f7352bf21f8fd7ba3e2fcef9488756f188e12be Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Fri, 22 May 2015 15:42:55 -0700 Subject: [PATCH 230/337] x86: bpf_jit: fix compilation of large bpf programs x86 has variable length encoding. x86 JIT compiler is trying to pick the shortest encoding for given bpf instruction. While doing so the jump targets are changing, so JIT is doing multiple passes over the program. Typical program needs 3 passes. Some very short programs converge with 2 passes. Large programs may need 4 or 5. But specially crafted bpf programs may hit the pass limit and if the program converges on the last iteration the JIT compiler will be producing an image full of 'int 3' insns. Fix this corner case by doing final iteration over bpf program. Fixes: 0a14842f5a3c ("net: filter: Just In Time compiler for x86-64") Reported-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov Tested-by: Daniel Borkmann Acked-by: Daniel Borkmann Signed-off-by: David S. Miller --- arch/x86/net/bpf_jit_comp.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index 99f76103c6b7..ddeff4844a10 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -966,7 +966,12 @@ void bpf_int_jit_compile(struct bpf_prog *prog) } ctx.cleanup_addr = proglen; - for (pass = 0; pass < 10; pass++) { + /* JITed image shrinks with every pass and the loop iterates + * until the image stops shrinking. Very large bpf programs + * may converge on the last pass. In such case do one more + * pass to emit the final image + */ + for (pass = 0; pass < 10 || image; pass++) { proglen = do_jit(prog, addrs, image, oldproglen, &ctx); if (proglen <= 0) { image = NULL; From 5369c71f7ca24f6472f8fa883e05fa7469fab284 Mon Sep 17 00:00:00 2001 From: Ivan Mikhaylov Date: Thu, 21 May 2015 19:11:02 +0400 Subject: [PATCH 231/337] net/ibm/emac: fix size of emac dump memory areas Fix in send of emac regs dump to ethtool which causing in wrong data interpretation on ethtool layer for MII and EMAC. Signed-off-by: Ivan Mikhaylov Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/emac/core.c | 16 ++++++---------- drivers/net/ethernet/ibm/emac/core.h | 7 ++----- 2 files changed, 8 insertions(+), 15 deletions(-) diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c index de7919322190..b9df0cbd0a38 100644 --- a/drivers/net/ethernet/ibm/emac/core.c +++ b/drivers/net/ethernet/ibm/emac/core.c @@ -2084,12 +2084,8 @@ static void emac_ethtool_get_pauseparam(struct net_device *ndev, static int emac_get_regs_len(struct emac_instance *dev) { - if (emac_has_feature(dev, EMAC_FTR_EMAC4)) return sizeof(struct emac_ethtool_regs_subhdr) + - EMAC4_ETHTOOL_REGS_SIZE(dev); - else - return sizeof(struct emac_ethtool_regs_subhdr) + - EMAC_ETHTOOL_REGS_SIZE(dev); + sizeof(struct emac_regs); } static int emac_ethtool_get_regs_len(struct net_device *ndev) @@ -2114,15 +2110,15 @@ static void *emac_dump_regs(struct emac_instance *dev, void *buf) struct emac_ethtool_regs_subhdr *hdr = buf; hdr->index = dev->cell_index; - if (emac_has_feature(dev, EMAC_FTR_EMAC4)) { + if (emac_has_feature(dev, EMAC_FTR_EMAC4SYNC)) { + hdr->version = EMAC4SYNC_ETHTOOL_REGS_VER; + } else if (emac_has_feature(dev, EMAC_FTR_EMAC4)) { hdr->version = EMAC4_ETHTOOL_REGS_VER; - memcpy_fromio(hdr + 1, dev->emacp, EMAC4_ETHTOOL_REGS_SIZE(dev)); - return (void *)(hdr + 1) + EMAC4_ETHTOOL_REGS_SIZE(dev); } else { hdr->version = EMAC_ETHTOOL_REGS_VER; - memcpy_fromio(hdr + 1, dev->emacp, EMAC_ETHTOOL_REGS_SIZE(dev)); - return (void *)(hdr + 1) + EMAC_ETHTOOL_REGS_SIZE(dev); } + memcpy_fromio(hdr + 1, dev->emacp, sizeof(struct emac_regs)); + return (void *)(hdr + 1) + sizeof(struct emac_regs); } static void emac_ethtool_get_regs(struct net_device *ndev, diff --git a/drivers/net/ethernet/ibm/emac/core.h b/drivers/net/ethernet/ibm/emac/core.h index 67f342a9f65e..28df37420da9 100644 --- a/drivers/net/ethernet/ibm/emac/core.h +++ b/drivers/net/ethernet/ibm/emac/core.h @@ -461,10 +461,7 @@ struct emac_ethtool_regs_subhdr { }; #define EMAC_ETHTOOL_REGS_VER 0 -#define EMAC_ETHTOOL_REGS_SIZE(dev) ((dev)->rsrc_regs.end - \ - (dev)->rsrc_regs.start + 1) -#define EMAC4_ETHTOOL_REGS_VER 1 -#define EMAC4_ETHTOOL_REGS_SIZE(dev) ((dev)->rsrc_regs.end - \ - (dev)->rsrc_regs.start + 1) +#define EMAC4_ETHTOOL_REGS_VER 1 +#define EMAC4SYNC_ETHTOOL_REGS_VER 2 #endif /* __IBM_NEWEMAC_CORE_H */ From 466c5ac8bdf29a382d064923a60ef302dd3b2aeb Mon Sep 17 00:00:00 2001 From: Mathieu Olivari Date: Fri, 22 May 2015 19:03:29 -0700 Subject: [PATCH 232/337] net: stmmac: create one debugfs dir per net-device stmmac DebugFS entries are currently global to the driver. As a result, having more than one stmmac device in the system creates the following error: * ERROR stmmaceth, debugfs create directory failed * stmmac_hw_setup: failed debugFS registration This also results in being able to access the debugfs information for the first registered device only. This patch changes the debugfs structure to have one sub-directory per net-device. Files under "/sys/kernel/debug/stmmaceth" will now show-up under /sys/kernel/debug/stmmaceth/ethN/. Signed-off-by: Mathieu Olivari Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac.h | 6 ++ .../net/ethernet/stmicro/stmmac/stmmac_main.c | 76 +++++++++++++------ 2 files changed, 59 insertions(+), 23 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h index 2ac9552d1fa3..73bab983edd9 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h @@ -117,6 +117,12 @@ struct stmmac_priv { int use_riwt; int irq_wake; spinlock_t ptp_lock; + +#ifdef CONFIG_DEBUG_FS + struct dentry *dbgfs_dir; + struct dentry *dbgfs_rings_status; + struct dentry *dbgfs_dma_cap; +#endif }; int stmmac_mdio_unregister(struct net_device *ndev); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 05c146f718a3..2c5ce2baca87 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -118,7 +118,7 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id); #ifdef CONFIG_DEBUG_FS static int stmmac_init_fs(struct net_device *dev); -static void stmmac_exit_fs(void); +static void stmmac_exit_fs(struct net_device *dev); #endif #define STMMAC_COAL_TIMER(x) (jiffies + usecs_to_jiffies(x)) @@ -1916,7 +1916,7 @@ static int stmmac_release(struct net_device *dev) netif_carrier_off(dev); #ifdef CONFIG_DEBUG_FS - stmmac_exit_fs(); + stmmac_exit_fs(dev); #endif stmmac_release_ptp(priv); @@ -2508,8 +2508,6 @@ static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) #ifdef CONFIG_DEBUG_FS static struct dentry *stmmac_fs_dir; -static struct dentry *stmmac_rings_status; -static struct dentry *stmmac_dma_cap; static void sysfs_display_ring(void *head, int size, int extend_desc, struct seq_file *seq) @@ -2648,36 +2646,39 @@ static const struct file_operations stmmac_dma_cap_fops = { static int stmmac_init_fs(struct net_device *dev) { - /* Create debugfs entries */ - stmmac_fs_dir = debugfs_create_dir(STMMAC_RESOURCE_NAME, NULL); + struct stmmac_priv *priv = netdev_priv(dev); - if (!stmmac_fs_dir || IS_ERR(stmmac_fs_dir)) { - pr_err("ERROR %s, debugfs create directory failed\n", - STMMAC_RESOURCE_NAME); + /* Create per netdev entries */ + priv->dbgfs_dir = debugfs_create_dir(dev->name, stmmac_fs_dir); + + if (!priv->dbgfs_dir || IS_ERR(priv->dbgfs_dir)) { + pr_err("ERROR %s/%s, debugfs create directory failed\n", + STMMAC_RESOURCE_NAME, dev->name); return -ENOMEM; } /* Entry to report DMA RX/TX rings */ - stmmac_rings_status = debugfs_create_file("descriptors_status", - S_IRUGO, stmmac_fs_dir, dev, - &stmmac_rings_status_fops); + priv->dbgfs_rings_status = + debugfs_create_file("descriptors_status", S_IRUGO, + priv->dbgfs_dir, dev, + &stmmac_rings_status_fops); - if (!stmmac_rings_status || IS_ERR(stmmac_rings_status)) { + if (!priv->dbgfs_rings_status || IS_ERR(priv->dbgfs_rings_status)) { pr_info("ERROR creating stmmac ring debugfs file\n"); - debugfs_remove(stmmac_fs_dir); + debugfs_remove_recursive(priv->dbgfs_dir); return -ENOMEM; } /* Entry to report the DMA HW features */ - stmmac_dma_cap = debugfs_create_file("dma_cap", S_IRUGO, stmmac_fs_dir, - dev, &stmmac_dma_cap_fops); + priv->dbgfs_dma_cap = debugfs_create_file("dma_cap", S_IRUGO, + priv->dbgfs_dir, + dev, &stmmac_dma_cap_fops); - if (!stmmac_dma_cap || IS_ERR(stmmac_dma_cap)) { + if (!priv->dbgfs_dma_cap || IS_ERR(priv->dbgfs_dma_cap)) { pr_info("ERROR creating stmmac MMC debugfs file\n"); - debugfs_remove(stmmac_rings_status); - debugfs_remove(stmmac_fs_dir); + debugfs_remove_recursive(priv->dbgfs_dir); return -ENOMEM; } @@ -2685,11 +2686,11 @@ static int stmmac_init_fs(struct net_device *dev) return 0; } -static void stmmac_exit_fs(void) +static void stmmac_exit_fs(struct net_device *dev) { - debugfs_remove(stmmac_rings_status); - debugfs_remove(stmmac_dma_cap); - debugfs_remove(stmmac_fs_dir); + struct stmmac_priv *priv = netdev_priv(dev); + + debugfs_remove_recursive(priv->dbgfs_dir); } #endif /* CONFIG_DEBUG_FS */ @@ -3149,6 +3150,35 @@ err: __setup("stmmaceth=", stmmac_cmdline_opt); #endif /* MODULE */ +static int __init stmmac_init(void) +{ +#ifdef CONFIG_DEBUG_FS + /* Create debugfs main directory if it doesn't exist yet */ + if (!stmmac_fs_dir) { + stmmac_fs_dir = debugfs_create_dir(STMMAC_RESOURCE_NAME, NULL); + + if (!stmmac_fs_dir || IS_ERR(stmmac_fs_dir)) { + pr_err("ERROR %s, debugfs create directory failed\n", + STMMAC_RESOURCE_NAME); + + return -ENOMEM; + } + } +#endif + + return 0; +} + +static void __exit stmmac_exit(void) +{ +#ifdef CONFIG_DEBUG_FS + debugfs_remove_recursive(stmmac_fs_dir); +#endif +} + +module_init(stmmac_init) +module_exit(stmmac_exit) + MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet device driver"); MODULE_AUTHOR("Giuseppe Cavallaro "); MODULE_LICENSE("GPL"); From 397a253af5031de4a4612210055935309af4472c Mon Sep 17 00:00:00 2001 From: Richard Cochran Date: Mon, 25 May 2015 11:55:43 +0200 Subject: [PATCH 233/337] net: dp83640: fix broken calibration routine. Currently, the calibration function that corrects the initial offsets among multiple devices only works the first time. If the function is called more than once, the calibration fails and bogus offsets will be programmed into the devices. In a well hidden spot, the device documentation tells that trigger indexes 0 and 1 are special in allowing the TRIG_IF_LATE flag to actually work. This patch fixes the issue by using one of the special triggers during the recalibration method. Signed-off-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/net/phy/dp83640.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c index 496e02f961d3..7a068d99ea46 100644 --- a/drivers/net/phy/dp83640.c +++ b/drivers/net/phy/dp83640.c @@ -47,7 +47,7 @@ #define PSF_TX 0x1000 #define EXT_EVENT 1 #define CAL_EVENT 7 -#define CAL_TRIGGER 7 +#define CAL_TRIGGER 1 #define DP83640_N_PINS 12 #define MII_DP83640_MICR 0x11 From a935865c828c8cd20501f618c69f659a5b6d6a5f Mon Sep 17 00:00:00 2001 From: Richard Cochran Date: Mon, 25 May 2015 11:55:44 +0200 Subject: [PATCH 234/337] net: dp83640: reinforce locking rules. Callers of the ext_write function are supposed to hold a mutex that protects the state of the dialed page, but one caller was missing the lock from the very start, and over time the code has been changed without following the rule. This patch cleans up the call sites in violation of the rule. Signed-off-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/net/phy/dp83640.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c index 7a068d99ea46..e570036275e2 100644 --- a/drivers/net/phy/dp83640.c +++ b/drivers/net/phy/dp83640.c @@ -496,7 +496,9 @@ static int ptp_dp83640_enable(struct ptp_clock_info *ptp, else evnt |= EVNT_RISE; } + mutex_lock(&clock->extreg_lock); ext_write(0, phydev, PAGE5, PTP_EVNT, evnt); + mutex_unlock(&clock->extreg_lock); return 0; case PTP_CLK_REQ_PEROUT: @@ -532,6 +534,8 @@ static u8 status_frame_src[6] = { 0x08, 0x00, 0x17, 0x0B, 0x6B, 0x0F }; static void enable_status_frames(struct phy_device *phydev, bool on) { + struct dp83640_private *dp83640 = phydev->priv; + struct dp83640_clock *clock = dp83640->clock; u16 cfg0 = 0, ver; if (on) @@ -539,9 +543,13 @@ static void enable_status_frames(struct phy_device *phydev, bool on) ver = (PSF_PTPVER & VERSIONPTP_MASK) << VERSIONPTP_SHIFT; + mutex_lock(&clock->extreg_lock); + ext_write(0, phydev, PAGE5, PSF_CFG0, cfg0); ext_write(0, phydev, PAGE6, PSF_CFG1, ver); + mutex_unlock(&clock->extreg_lock); + if (!phydev->attached_dev) { pr_warn("expected to find an attached netdevice\n"); return; @@ -1173,11 +1181,18 @@ static int dp83640_config_init(struct phy_device *phydev) if (clock->chosen && !list_empty(&clock->phylist)) recalibrate(clock); - else + else { + mutex_lock(&clock->extreg_lock); enable_broadcast(phydev, clock->page, 1); + mutex_unlock(&clock->extreg_lock); + } enable_status_frames(phydev, true); + + mutex_lock(&clock->extreg_lock); ext_write(0, phydev, PAGE4, PTP_CTL, PTP_ENABLE); + mutex_unlock(&clock->extreg_lock); + return 0; } From adbe088f6f8b0b7701fe07f51fe6f2bd602a6665 Mon Sep 17 00:00:00 2001 From: Richard Cochran Date: Mon, 25 May 2015 11:55:45 +0200 Subject: [PATCH 235/337] net: dp83640: fix improper double spin locking. A pair of nested spin locks was introduced in commit 63502b8d0 "dp83640: Fix receive timestamp race condition". Unfortunately the 'flags' parameter was reused for the inner lock, clobbering the originally saved IRQ state. This patch fixes the issue by changing the inner lock to plain spin_lock without irqsave. Signed-off-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/net/phy/dp83640.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c index e570036275e2..00cb41e71312 100644 --- a/drivers/net/phy/dp83640.c +++ b/drivers/net/phy/dp83640.c @@ -846,7 +846,7 @@ static void decode_rxts(struct dp83640_private *dp83640, list_del_init(&rxts->list); phy2rxts(phy_rxts, rxts); - spin_lock_irqsave(&dp83640->rx_queue.lock, flags); + spin_lock(&dp83640->rx_queue.lock); skb_queue_walk(&dp83640->rx_queue, skb) { struct dp83640_skb_info *skb_info; @@ -861,7 +861,7 @@ static void decode_rxts(struct dp83640_private *dp83640, break; } } - spin_unlock_irqrestore(&dp83640->rx_queue.lock, flags); + spin_unlock(&dp83640->rx_queue.lock); if (!shhwtstamps) list_add_tail(&rxts->list, &dp83640->rxts); From e74993aef4411995960052506a000f94411a7103 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 4 May 2015 15:30:47 -0700 Subject: [PATCH 236/337] xtensa: Provide dummy dma_alloc_attrs() and dma_free_attrs() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit xtensa:allmodconfig fails to build with the following errors. drivers/gpu/drm/nouveau/nvkm/subdev/instmem/gk20a.c: In function ‘gk20a_instobj_dtor_dma’: drivers/gpu/drm/nouveau/nvkm/subdev/instmem/gk20a.c:154:2: error: implicit declaration of function ‘dma_free_attrs’ drivers/gpu/drm/nouveau/nvkm/subdev/instmem/gk20a.c: In function ‘gk20a_instobj_ctor_dma’: drivers/gpu/drm/nouveau/nvkm/subdev/instmem/gk20a.c:218:2: error: implicit declaration of function ‘dma_alloc_attrs’ Xtensa does not provide those functions at this time. Provide dummy implementations to avoid build errors. Acked-by: Max Filippov Signed-off-by: Guenter Roeck Signed-off-by: Chris Zankel --- arch/xtensa/include/asm/dma-mapping.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/xtensa/include/asm/dma-mapping.h b/arch/xtensa/include/asm/dma-mapping.h index 172a02a6ad14..ba78ccf651e7 100644 --- a/arch/xtensa/include/asm/dma-mapping.h +++ b/arch/xtensa/include/asm/dma-mapping.h @@ -185,4 +185,17 @@ static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt, return -EINVAL; } +static inline void *dma_alloc_attrs(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag, + struct dma_attrs *attrs) +{ + return NULL; +} + +static inline void dma_free_attrs(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle, + struct dma_attrs *attrs) +{ +} + #endif /* _XTENSA_DMA_MAPPING_H */ From 990ed2720717173bbdea4cfb2bad37cc7aa91495 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Thu, 21 May 2015 11:58:30 -0400 Subject: [PATCH 237/337] drm/vgem: drop DRIVER_PRIME (v2) For actual sharing of buffers with other drivers (ie. actual hardware) we'll need to pimp things out a bit better to deal w/ caching, multiple memory domains, etc. See thread: http://lists.freedesktop.org/archives/dri-devel/2015-May/083160.html But for the llvmpipe use-case this isn't a problem. Nor do we really need prime/dri3 (dri2 is sufficient). So until the other issues are sorted lets remove DRIVER_PRIME. v2: also drop the dead code [airlied: Okay I'm convinced this API could have a lot of use cases that are really really bad, yes the upload use case is valid however that isn't the only use case enabled, and if we allow all the other use cases, people will start to (ab)use them, and then they'll be ABI and my life will get worse, so disable PRIME for now] Acked-by: Thomas Hellstrom Acked-by: Daniel Vetter Signed-off-by: Rob Clark Signed-off-by: Dave Airlie --- drivers/gpu/drm/vgem/Makefile | 2 +- drivers/gpu/drm/vgem/vgem_dma_buf.c | 94 ----------------------------- drivers/gpu/drm/vgem/vgem_drv.c | 11 +--- drivers/gpu/drm/vgem/vgem_drv.h | 11 ---- 4 files changed, 2 insertions(+), 116 deletions(-) delete mode 100644 drivers/gpu/drm/vgem/vgem_dma_buf.c diff --git a/drivers/gpu/drm/vgem/Makefile b/drivers/gpu/drm/vgem/Makefile index 1055cb79096c..3f4c7b842028 100644 --- a/drivers/gpu/drm/vgem/Makefile +++ b/drivers/gpu/drm/vgem/Makefile @@ -1,4 +1,4 @@ ccflags-y := -Iinclude/drm -vgem-y := vgem_drv.o vgem_dma_buf.o +vgem-y := vgem_drv.o obj-$(CONFIG_DRM_VGEM) += vgem.o diff --git a/drivers/gpu/drm/vgem/vgem_dma_buf.c b/drivers/gpu/drm/vgem/vgem_dma_buf.c deleted file mode 100644 index 0254438ad1a6..000000000000 --- a/drivers/gpu/drm/vgem/vgem_dma_buf.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Copyright © 2012 Intel Corporation - * Copyright © 2014 The Chromium OS Authors - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS - * IN THE SOFTWARE. - * - * Authors: - * Ben Widawsky - * - */ - -#include -#include "vgem_drv.h" - -struct sg_table *vgem_gem_prime_get_sg_table(struct drm_gem_object *gobj) -{ - struct drm_vgem_gem_object *obj = to_vgem_bo(gobj); - BUG_ON(obj->pages == NULL); - - return drm_prime_pages_to_sg(obj->pages, obj->base.size / PAGE_SIZE); -} - -int vgem_gem_prime_pin(struct drm_gem_object *gobj) -{ - struct drm_vgem_gem_object *obj = to_vgem_bo(gobj); - return vgem_gem_get_pages(obj); -} - -void vgem_gem_prime_unpin(struct drm_gem_object *gobj) -{ - struct drm_vgem_gem_object *obj = to_vgem_bo(gobj); - vgem_gem_put_pages(obj); -} - -void *vgem_gem_prime_vmap(struct drm_gem_object *gobj) -{ - struct drm_vgem_gem_object *obj = to_vgem_bo(gobj); - BUG_ON(obj->pages == NULL); - - return vmap(obj->pages, obj->base.size / PAGE_SIZE, 0, PAGE_KERNEL); -} - -void vgem_gem_prime_vunmap(struct drm_gem_object *obj, void *vaddr) -{ - vunmap(vaddr); -} - -struct drm_gem_object *vgem_gem_prime_import(struct drm_device *dev, - struct dma_buf *dma_buf) -{ - struct drm_vgem_gem_object *obj = NULL; - int ret; - - obj = kzalloc(sizeof(*obj), GFP_KERNEL); - if (obj == NULL) { - ret = -ENOMEM; - goto fail; - } - - ret = drm_gem_object_init(dev, &obj->base, dma_buf->size); - if (ret) { - ret = -ENOMEM; - goto fail_free; - } - - get_dma_buf(dma_buf); - - obj->base.dma_buf = dma_buf; - obj->use_dma_buf = true; - - return &obj->base; - -fail_free: - kfree(obj); -fail: - return ERR_PTR(ret); -} diff --git a/drivers/gpu/drm/vgem/vgem_drv.c b/drivers/gpu/drm/vgem/vgem_drv.c index cb3b43525b2d..7a207ca547be 100644 --- a/drivers/gpu/drm/vgem/vgem_drv.c +++ b/drivers/gpu/drm/vgem/vgem_drv.c @@ -302,22 +302,13 @@ static const struct file_operations vgem_driver_fops = { }; static struct drm_driver vgem_driver = { - .driver_features = DRIVER_GEM | DRIVER_PRIME, + .driver_features = DRIVER_GEM, .gem_free_object = vgem_gem_free_object, .gem_vm_ops = &vgem_gem_vm_ops, .ioctls = vgem_ioctls, .fops = &vgem_driver_fops, .dumb_create = vgem_gem_dumb_create, .dumb_map_offset = vgem_gem_dumb_map, - .prime_handle_to_fd = drm_gem_prime_handle_to_fd, - .prime_fd_to_handle = drm_gem_prime_fd_to_handle, - .gem_prime_export = drm_gem_prime_export, - .gem_prime_import = vgem_gem_prime_import, - .gem_prime_pin = vgem_gem_prime_pin, - .gem_prime_unpin = vgem_gem_prime_unpin, - .gem_prime_get_sg_table = vgem_gem_prime_get_sg_table, - .gem_prime_vmap = vgem_gem_prime_vmap, - .gem_prime_vunmap = vgem_gem_prime_vunmap, .name = DRIVER_NAME, .desc = DRIVER_DESC, .date = DRIVER_DATE, diff --git a/drivers/gpu/drm/vgem/vgem_drv.h b/drivers/gpu/drm/vgem/vgem_drv.h index 57ab4d8f41f9..e9f92f7ee275 100644 --- a/drivers/gpu/drm/vgem/vgem_drv.h +++ b/drivers/gpu/drm/vgem/vgem_drv.h @@ -43,15 +43,4 @@ struct drm_vgem_gem_object { extern void vgem_gem_put_pages(struct drm_vgem_gem_object *obj); extern int vgem_gem_get_pages(struct drm_vgem_gem_object *obj); -/* vgem_dma_buf.c */ -extern struct sg_table *vgem_gem_prime_get_sg_table( - struct drm_gem_object *gobj); -extern int vgem_gem_prime_pin(struct drm_gem_object *gobj); -extern void vgem_gem_prime_unpin(struct drm_gem_object *gobj); -extern void *vgem_gem_prime_vmap(struct drm_gem_object *gobj); -extern void vgem_gem_prime_vunmap(struct drm_gem_object *obj, void *vaddr); -extern struct drm_gem_object *vgem_gem_prime_import(struct drm_device *dev, - struct dma_buf *dma_buf); - - #endif From 823245026ead28a244cb9df5ae79b511da128606 Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Mon, 25 May 2015 17:16:49 +0800 Subject: [PATCH 238/337] ALSA: hda/realtek - Add ALC256 alias name for Dell Add ALC3246 for Dell platform. Signed-off-by: Kailang Yang Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 31f8f13be907..fc0ccc78bdc7 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -884,6 +884,7 @@ static struct alc_codec_rename_pci_table rename_pci_tbl[] = { { 0x10ec0275, 0x1028, 0, "ALC3260" }, { 0x10ec0899, 0x1028, 0, "ALC3861" }, { 0x10ec0298, 0x1028, 0, "ALC3266" }, + { 0x10ec0256, 0x1028, 0, "ALC3246" }, { 0x10ec0670, 0x1025, 0, "ALC669X" }, { 0x10ec0676, 0x1025, 0, "ALC679X" }, { 0x10ec0282, 0x1043, 0, "ALC3229" }, From 68feaca0b13e453aa14ee064c1736202b48b342f Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Thu, 19 Feb 2015 10:30:14 +0100 Subject: [PATCH 239/337] backlight: pwm: Handle EPROBE_DEFER while requesting the PWM When trying to request the PWM device with devm_pwm_get(), the EPROBE_DEFER flag is not handled properly. It can lead to the PWM not being found. Signed-off-by: Boris Brezillon Signed-off-by: Nicolas Ferre Acked-by: Thierry Reding Signed-off-by: Lee Jones --- drivers/video/backlight/pwm_bl.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index 3a145a643e0d..6897f1c1bc73 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -274,6 +274,10 @@ static int pwm_backlight_probe(struct platform_device *pdev) pb->pwm = devm_pwm_get(&pdev->dev, NULL); if (IS_ERR(pb->pwm)) { + ret = PTR_ERR(pb->pwm); + if (ret == -EPROBE_DEFER) + goto err_alloc; + dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n"); pb->legacy = true; pb->pwm = pwm_request(data->pwm_id, "pwm-backlight"); From f858c7bcca8c20761a20593439fe998b4b67e86b Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 26 May 2015 15:32:42 +0800 Subject: [PATCH 240/337] crypto: algif_aead - Disable AEAD user-space for now The newly added AEAD user-space isn't quite ready for prime time just yet. In particular it is conflicting with the AEAD single SG list interface change so this patch disables it now. Once the SG list stuff is completely done we can then renable this interface. Signed-off-by: Herbert Xu --- crypto/Kconfig | 9 --------- 1 file changed, 9 deletions(-) diff --git a/crypto/Kconfig b/crypto/Kconfig index 8aaf298a80e1..362905e7c841 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -1512,15 +1512,6 @@ config CRYPTO_USER_API_RNG This option enables the user-spaces interface for random number generator algorithms. -config CRYPTO_USER_API_AEAD - tristate "User-space interface for AEAD cipher algorithms" - depends on NET - select CRYPTO_AEAD - select CRYPTO_USER_API - help - This option enables the user-spaces interface for AEAD - cipher algorithms. - config CRYPTO_HASH_INFO bool From 4ae9944d132b160d444fa3aa875307eb0fa3eeec Mon Sep 17 00:00:00 2001 From: Junichi Nomura Date: Tue, 26 May 2015 08:25:54 +0000 Subject: [PATCH 241/337] dm: run queue on re-queue Without kicking queue, requeued request may stay forever in the queue if there are no other I/O activities to the device. The original error had been in v2.6.39 with commit 7eaceaccab5f ("block: remove per-queue plugging"), which replaced conditional plugging by periodic runqueue. Commit 9d1deb83d489 in v4.1-rc1 removed the periodic runqueue and the problem started to manifest. Fixes: 9d1deb83d489 ("dm: don't schedule delayed run of the queue if nothing to do") Signed-off-by: Jun'ichi Nomura Signed-off-by: Mike Snitzer --- drivers/md/dm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index a930b72314ac..0bf79a0bad37 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1164,6 +1164,7 @@ static void old_requeue_request(struct request *rq) spin_lock_irqsave(q->queue_lock, flags); blk_requeue_request(q, rq); + blk_run_queue_async(q); spin_unlock_irqrestore(q->queue_lock, flags); } From e21422de817ab0b67ed1902fe1383bcdeece855e Mon Sep 17 00:00:00 2001 From: James Hogan Date: Tue, 28 Apr 2015 10:57:29 +0100 Subject: [PATCH 242/337] MIPS: Fix CDMM to use native endian MMIO reads The MIPS Common Device Memory Map (CDMM) is internal to the core and has native endianness. There is therefore no need to byte swap the accesses on big endian targets, so convert the CDMM bus driver to use __raw_readl() rather than readl(). Fixes: 8286ae03308c ("MIPS: Add CDMM bus support") Signed-off-by: James Hogan Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9904/ Signed-off-by: Ralf Baechle --- drivers/bus/mips_cdmm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/bus/mips_cdmm.c b/drivers/bus/mips_cdmm.c index 5bd792c68f9b..ab3bde16ecb4 100644 --- a/drivers/bus/mips_cdmm.c +++ b/drivers/bus/mips_cdmm.c @@ -453,7 +453,7 @@ void __iomem *mips_cdmm_early_probe(unsigned int dev_type) /* Look for a specific device type */ for (; drb < bus->drbs; drb += size + 1) { - acsr = readl(cdmm + drb * CDMM_DRB_SIZE); + acsr = __raw_readl(cdmm + drb * CDMM_DRB_SIZE); type = (acsr & CDMM_ACSR_DEVTYPE) >> CDMM_ACSR_DEVTYPE_SHIFT; if (type == dev_type) return cdmm + drb * CDMM_DRB_SIZE; @@ -500,7 +500,7 @@ static void mips_cdmm_bus_discover(struct mips_cdmm_bus *bus) bus->discovered = true; pr_info("cdmm%u discovery (%u blocks)\n", cpu, bus->drbs); for (; drb < bus->drbs; drb += size + 1) { - acsr = readl(cdmm + drb * CDMM_DRB_SIZE); + acsr = __raw_readl(cdmm + drb * CDMM_DRB_SIZE); type = (acsr & CDMM_ACSR_DEVTYPE) >> CDMM_ACSR_DEVTYPE_SHIFT; size = (acsr & CDMM_ACSR_DEVSIZE) >> CDMM_ACSR_DEVSIZE_SHIFT; rev = (acsr & CDMM_ACSR_DEVREV) >> CDMM_ACSR_DEVREV_SHIFT; From 70f041b6e1ff508750988ffd034ac6117d34d4d7 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Tue, 28 Apr 2015 10:57:30 +0100 Subject: [PATCH 243/337] ttyFDC: Fix to use native endian MMIO reads The MIPS Common Device Memory Map (CDMM) is internal to the core and has native endianness. There is therefore no need to byte swap the accesses on big endian targets, so convert the Fast Debug Channel (FDC) TTY driver to use __raw_readl()/__raw_writel() rather than ioread32()/iowrite32(). Fixes: 4cebec609aea ("TTY: Add MIPS EJTAG Fast Debug Channel TTY driver") Fixes: c2d7ef51d731 ("ttyFDC: Implement KGDB IO operations.") Signed-off-by: James Hogan Cc: Ralf Baechle Cc: Jiri Slaby Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9905/ Acked-by: Greg Kroah-Hartman Signed-off-by: Ralf Baechle --- drivers/tty/mips_ejtag_fdc.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/tty/mips_ejtag_fdc.c b/drivers/tty/mips_ejtag_fdc.c index 04d9e23d1ee1..358323c83b4f 100644 --- a/drivers/tty/mips_ejtag_fdc.c +++ b/drivers/tty/mips_ejtag_fdc.c @@ -174,13 +174,13 @@ struct mips_ejtag_fdc_tty { static inline void mips_ejtag_fdc_write(struct mips_ejtag_fdc_tty *priv, unsigned int offs, unsigned int data) { - iowrite32(data, priv->reg + offs); + __raw_writel(data, priv->reg + offs); } static inline unsigned int mips_ejtag_fdc_read(struct mips_ejtag_fdc_tty *priv, unsigned int offs) { - return ioread32(priv->reg + offs); + return __raw_readl(priv->reg + offs); } /* Encoding of byte stream in FDC words */ @@ -347,9 +347,9 @@ static void mips_ejtag_fdc_console_write(struct console *c, const char *s, s += inc[word.bytes - 1]; /* Busy wait until there's space in fifo */ - while (ioread32(regs + REG_FDSTAT) & REG_FDSTAT_TXF) + while (__raw_readl(regs + REG_FDSTAT) & REG_FDSTAT_TXF) ; - iowrite32(word.word, regs + REG_FDTX(c->index)); + __raw_writel(word.word, regs + REG_FDTX(c->index)); } out: local_irq_restore(flags); @@ -1227,7 +1227,7 @@ static int kgdbfdc_read_char(void) /* Read next word from KGDB channel */ do { - stat = ioread32(regs + REG_FDSTAT); + stat = __raw_readl(regs + REG_FDSTAT); /* No data waiting? */ if (stat & REG_FDSTAT_RXE) @@ -1236,7 +1236,7 @@ static int kgdbfdc_read_char(void) /* Read next word */ channel = (stat & REG_FDSTAT_RXCHAN) >> REG_FDSTAT_RXCHAN_SHIFT; - data = ioread32(regs + REG_FDRX); + data = __raw_readl(regs + REG_FDRX); } while (channel != CONFIG_MIPS_EJTAG_FDC_KGDB_CHAN); /* Decode into rbuf */ @@ -1266,9 +1266,10 @@ static void kgdbfdc_push_one(void) return; /* Busy wait until there's space in fifo */ - while (ioread32(regs + REG_FDSTAT) & REG_FDSTAT_TXF) + while (__raw_readl(regs + REG_FDSTAT) & REG_FDSTAT_TXF) ; - iowrite32(word.word, regs + REG_FDTX(CONFIG_MIPS_EJTAG_FDC_KGDB_CHAN)); + __raw_writel(word.word, + regs + REG_FDTX(CONFIG_MIPS_EJTAG_FDC_KGDB_CHAN)); } /* flush the whole write buffer to the TX FIFO */ From 884e7e5e7d1a35b944436895852d5ed24e79d42e Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 20 May 2015 05:44:54 -0700 Subject: [PATCH 244/337] MIPS: irq: Use DECLARE_BITMAP Use the generic mechanism to declare a bitmap instead of unsigned long. This could fix an overwrite defect of whatever follows irq_map. Not all "#define NR_IRQS " are a multiple of BITS_PER_LONG so using DECLARE_BITMAP allocates the proper number of longs required for the possible bits. For instance: arch/mips/include/asm/mach-ath79/irq.h:#define NR_IRQS 51 arch/mips/include/asm/mach-db1x00/irq.h:#define NR_IRQS 152 arch/mips/include/asm/mach-lantiq/falcon/irq.h:#define NR_IRQS 328 Signed-off-by: Joe Perches Cc: linux-mips Cc: LKML Cc: Gabor Juhos Cc: Manuel Lauss Cc: John Crispin Patchwork: https://patchwork.linux-mips.org/patch/10091/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index d2bfbc2e8995..51f57d841662 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -29,7 +29,7 @@ int kgdb_early_setup; #endif -static unsigned long irq_map[NR_IRQS / BITS_PER_LONG]; +static DECLARE_BITMAP(irq_map, NR_IRQS); int allocate_irqno(void) { From 5767b52c47488e288c6b6f94e4739e1fdfdf4e81 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 26 May 2015 12:54:18 +0200 Subject: [PATCH 245/337] MIPS: Fuloong 2E: Replace CONFIG_USB_ISP1760_HCD by CONFIG_USB_ISP1760 Since commit 100832abf065bc18 ("usb: isp1760: Make HCD support optional"), CONFIG_USB_ISP1760_HCD is automatically selected when needed. Enabling that option in the defconfig is now a no-op, and no longer enables ISP1760 HCD support. Re-enable the ISP1760 driver in the defconfig by enabling USB_ISP1760_HOST_ROLE instead. Signed-off-by: Geert Uytterhoeven Cc: Laurent Pinchart Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10180/ Signed-off-by: Ralf Baechle --- arch/mips/configs/fuloong2e_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig index 002680648dcb..b2a577ebce0b 100644 --- a/arch/mips/configs/fuloong2e_defconfig +++ b/arch/mips/configs/fuloong2e_defconfig @@ -194,7 +194,7 @@ CONFIG_USB_WUSB_CBAF=m CONFIG_USB_C67X00_HCD=m CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_ISP1760_HCD=m +CONFIG_USB_ISP1760=m CONFIG_USB_OHCI_HCD=y CONFIG_USB_UHCI_HCD=m CONFIG_USB_R8A66597_HCD=m From ebdd117e5aab748d06f872860f36a0b09d8aadfc Mon Sep 17 00:00:00 2001 From: Yijing Wang Date: Thu, 8 Aug 2013 21:13:54 +0800 Subject: [PATCH 246/337] alpha: clean up unnecessary MSI/MSI-X capability find PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang Cc: Richard Henderson Cc: Ivan Kokshaysky Acked-by: Matt Turner Cc: Phil Carmody Cc: linux-alpha@vger.kernel.org Signed-off-by: Matt Turner --- arch/alpha/kernel/sys_marvel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/alpha/kernel/sys_marvel.c b/arch/alpha/kernel/sys_marvel.c index f21d61fab678..24e41bd7d3c9 100644 --- a/arch/alpha/kernel/sys_marvel.c +++ b/arch/alpha/kernel/sys_marvel.c @@ -331,7 +331,7 @@ marvel_map_irq(const struct pci_dev *cdev, u8 slot, u8 pin) pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &intline); irq = intline; - msi_loc = pci_find_capability(dev, PCI_CAP_ID_MSI); + msi_loc = dev->msi_cap; msg_ctl = 0; if (msi_loc) pci_read_config_word(dev, msi_loc + PCI_MSI_FLAGS, &msg_ctl); From ae6d78d78a20c351164d371e94b2aadc54536b40 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 25 Nov 2013 09:55:22 +0100 Subject: [PATCH 247/337] alpha: Remove #include from Everything in arch/alpha/include/uapi/asm/types.h is protected by "#ifndef __KERNEL__", so it's unused for kernelspace. Signed-off-by: Geert Uytterhoeven Cc: Richard Henderson Cc: Ivan Kokshaysky Acked-by: Matt Turner Cc: linux-alpha@vger.kernel.org Signed-off-by: Matt Turner --- arch/alpha/include/asm/types.h | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/alpha/include/asm/types.h b/arch/alpha/include/asm/types.h index f61e1a56c378..4cb4b6d3452c 100644 --- a/arch/alpha/include/asm/types.h +++ b/arch/alpha/include/asm/types.h @@ -2,6 +2,5 @@ #define _ALPHA_TYPES_H #include -#include #endif /* _ALPHA_TYPES_H */ From 614aab527b3d48f481854c215251471407473599 Mon Sep 17 00:00:00 2001 From: Jiang Liu Date: Mon, 16 Dec 2013 00:36:25 +0800 Subject: [PATCH 248/337] smp, alpha: kill SMP single function call interrupt Commit 9a46ad6d6df3b54 "smp: make smp_call_function_many() use logic similar to smp_call_function_single()" has unified the way to handle single and multiple cross-CPU function calls. Now only one interrupt is needed for architecture specific code to support generic SMP function call interfaces, so kill the redundant single function call interrupt. Cc: Andrew Morton Cc: Shaohua Li Cc: Peter Zijlstra Cc: Ingo Molnar Cc: Steven Rostedt Cc: Jiri Kosina Cc: Richard Henderson Cc: Ivan Kokshaysky Acked-by: Matt Turner Cc: linux-alpha@vger.kernel.org Signed-off-by: Jiang Liu Signed-off-by: Matt Turner --- arch/alpha/kernel/smp.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c index 99ac36d5de4e..2f24447fef92 100644 --- a/arch/alpha/kernel/smp.c +++ b/arch/alpha/kernel/smp.c @@ -63,7 +63,6 @@ static struct { enum ipi_message_type { IPI_RESCHEDULE, IPI_CALL_FUNC, - IPI_CALL_FUNC_SINGLE, IPI_CPU_STOP, }; @@ -506,7 +505,6 @@ setup_profiling_timer(unsigned int multiplier) return -EINVAL; } - static void send_ipi_message(const struct cpumask *to_whom, enum ipi_message_type operation) { @@ -552,10 +550,6 @@ handle_ipi(struct pt_regs *regs) generic_smp_call_function_interrupt(); break; - case IPI_CALL_FUNC_SINGLE: - generic_smp_call_function_single_interrupt(); - break; - case IPI_CPU_STOP: halt(); @@ -606,7 +600,7 @@ void arch_send_call_function_ipi_mask(const struct cpumask *mask) void arch_send_call_function_single_ipi(int cpu) { - send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE); + send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC); } static void From 11447c7c4f046350f63693e2c935e6b33a1b62a8 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Fri, 10 Jan 2014 17:02:02 -0500 Subject: [PATCH 249/337] alpha: don't use module_init for non-modular core code The srm console is always built in. It will never be modular, so using module_init as an alias for __initcall is rather misleading. Fix this up now, so that we can relocate module_init from init.h into module.h in the future. If we don't do this, we'd have to add module.h to obviously non-modular code, and that would be a worse thing. Direct use of __initcall is discouraged, vs prioritized ones. Use of device_initcall is consistent with what __initcall maps onto, and hence does not change the init order, making the impact of this change zero. Should someone with real hardware for boot testing want to change it later to arch_initcall or console_initcall, they can do that at a later date. Reviewed-by: Richard Henderson Cc: Ivan Kokshaysky Acked-by: Matt Turner Cc: linux-alpha@vger.kernel.org Signed-off-by: Paul Gortmaker Signed-off-by: Matt Turner --- arch/alpha/kernel/srmcons.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c index 6f01d9ad7b81..72b59511e59a 100644 --- a/arch/alpha/kernel/srmcons.c +++ b/arch/alpha/kernel/srmcons.c @@ -237,8 +237,7 @@ srmcons_init(void) return -ENODEV; } - -module_init(srmcons_init); +device_initcall(srmcons_init); /* From 0bc25674a4a2ec32140e2f3f0b863cf87e566ad4 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Tue, 21 Jan 2014 16:22:40 -0500 Subject: [PATCH 250/337] alpha: delete non-required instances of None of these files are actually using any __init type directives and hence don't need to include . Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Acked-by: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Cc: linux-alpha@vger.kernel.org Signed-off-by: Paul Gortmaker Signed-off-by: Matt Turner --- arch/alpha/kernel/err_ev6.c | 1 - arch/alpha/kernel/irq.c | 1 - arch/alpha/kernel/traps.c | 1 - arch/alpha/oprofile/op_model_ev4.c | 1 - arch/alpha/oprofile/op_model_ev5.c | 1 - arch/alpha/oprofile/op_model_ev6.c | 1 - arch/alpha/oprofile/op_model_ev67.c | 1 - 7 files changed, 7 deletions(-) diff --git a/arch/alpha/kernel/err_ev6.c b/arch/alpha/kernel/err_ev6.c index 253cf1a87481..51267ac5729b 100644 --- a/arch/alpha/kernel/err_ev6.c +++ b/arch/alpha/kernel/err_ev6.c @@ -6,7 +6,6 @@ * Error handling code supporting Alpha systems */ -#include #include #include diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c index 7b2be251c30f..51f2c8654253 100644 --- a/arch/alpha/kernel/irq.c +++ b/arch/alpha/kernel/irq.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c index 9c4c189eb22f..74aceead06e9 100644 --- a/arch/alpha/kernel/traps.c +++ b/arch/alpha/kernel/traps.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include diff --git a/arch/alpha/oprofile/op_model_ev4.c b/arch/alpha/oprofile/op_model_ev4.c index 18aa9b4f94f1..086a0d5445c5 100644 --- a/arch/alpha/oprofile/op_model_ev4.c +++ b/arch/alpha/oprofile/op_model_ev4.c @@ -8,7 +8,6 @@ */ #include -#include #include #include diff --git a/arch/alpha/oprofile/op_model_ev5.c b/arch/alpha/oprofile/op_model_ev5.c index c32f8a0ad925..c300f5ef3482 100644 --- a/arch/alpha/oprofile/op_model_ev5.c +++ b/arch/alpha/oprofile/op_model_ev5.c @@ -8,7 +8,6 @@ */ #include -#include #include #include diff --git a/arch/alpha/oprofile/op_model_ev6.c b/arch/alpha/oprofile/op_model_ev6.c index 1c84cc257fc7..02edf5971614 100644 --- a/arch/alpha/oprofile/op_model_ev6.c +++ b/arch/alpha/oprofile/op_model_ev6.c @@ -8,7 +8,6 @@ */ #include -#include #include #include diff --git a/arch/alpha/oprofile/op_model_ev67.c b/arch/alpha/oprofile/op_model_ev67.c index 34a57a126553..adb1744d20f3 100644 --- a/arch/alpha/oprofile/op_model_ev67.c +++ b/arch/alpha/oprofile/op_model_ev67.c @@ -9,7 +9,6 @@ */ #include -#include #include #include From 9f7b2d1f02c5dae9c7fd59848681c88dc3741819 Mon Sep 17 00:00:00 2001 From: Alex Dowad Date: Fri, 13 Mar 2015 20:04:17 +0200 Subject: [PATCH 251/337] alpha: copy_thread(): rename 'arg' argument to 'kthread_arg' The 'arg' argument to copy_thread() is only ever used when forking a new kernel thread. Hence, rename it to 'kthread_arg' for clarity (and consistency with do_fork() and other arch-specific implementations of copy_thread()). Signed-off-by: Alex Dowad Signed-off-by: Matt Turner --- arch/alpha/kernel/process.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c index 1941a07b5811..84d13263ce46 100644 --- a/arch/alpha/kernel/process.c +++ b/arch/alpha/kernel/process.c @@ -236,12 +236,11 @@ release_thread(struct task_struct *dead_task) } /* - * Copy an alpha thread.. + * Copy architecture-specific thread state */ - int copy_thread(unsigned long clone_flags, unsigned long usp, - unsigned long arg, + unsigned long kthread_arg, struct task_struct *p) { extern void ret_from_fork(void); @@ -262,7 +261,7 @@ copy_thread(unsigned long clone_flags, unsigned long usp, sizeof(struct switch_stack) + sizeof(struct pt_regs)); childstack->r26 = (unsigned long) ret_from_kernel_thread; childstack->r9 = usp; /* function */ - childstack->r10 = arg; + childstack->r10 = kthread_arg; childregs->hae = alpha_mv.hae_cache, childti->pcb.usp = 0; return 0; From 234306038064131a77da176d41e89e2c1535cda9 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Mon, 23 Mar 2015 22:47:21 +0100 Subject: [PATCH 252/337] alpha: Fix bootpfile and bootpzfile make targets Fix the bootpfile and bootpzfile make targets to creat BOOTP images. Both targets were broken due to some missing defines to re-map ELF constants. In addition the old code used the generic vsprintf function of the kernel which we now replace by a simple and much smaller implementation for the bootloader. Signed-off-by: Helge Deller Signed-off-by: Matt Turner --- arch/alpha/boot/Makefile | 16 +- arch/alpha/boot/main.c | 1 - arch/alpha/boot/stdio.c | 306 +++++++++++++++++++++++++++++++ arch/alpha/boot/tools/objstrip.c | 3 + 4 files changed, 319 insertions(+), 7 deletions(-) create mode 100644 arch/alpha/boot/stdio.c diff --git a/arch/alpha/boot/Makefile b/arch/alpha/boot/Makefile index cd143887380a..8399bd0e68e8 100644 --- a/arch/alpha/boot/Makefile +++ b/arch/alpha/boot/Makefile @@ -14,6 +14,9 @@ targets := vmlinux.gz vmlinux \ tools/bootpzh bootloader bootpheader bootpzheader OBJSTRIP := $(obj)/tools/objstrip +HOSTCFLAGS := -Wall -I$(objtree)/usr/include +BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) + # SRM bootable image. Copy to offset 512 of a partition. $(obj)/bootimage: $(addprefix $(obj)/tools/,mkbb lxboot bootlx) $(obj)/vmlinux.nh ( cat $(obj)/tools/lxboot $(obj)/tools/bootlx $(obj)/vmlinux.nh ) > $@ @@ -96,13 +99,14 @@ $(obj)/tools/bootph: $(obj)/bootpheader $(OBJSTRIP) FORCE $(obj)/tools/bootpzh: $(obj)/bootpzheader $(OBJSTRIP) FORCE $(call if_changed,objstrip) -LDFLAGS_bootloader := -static -uvsprintf -T #-N -relax -LDFLAGS_bootpheader := -static -uvsprintf -T #-N -relax -LDFLAGS_bootpzheader := -static -uvsprintf -T #-N -relax +LDFLAGS_bootloader := -static -T # -N -relax +LDFLAGS_bootloader := -static -T # -N -relax +LDFLAGS_bootpheader := -static -T # -N -relax +LDFLAGS_bootpzheader := -static -T # -N -relax -OBJ_bootlx := $(obj)/head.o $(obj)/main.o -OBJ_bootph := $(obj)/head.o $(obj)/bootp.o -OBJ_bootpzh := $(obj)/head.o $(obj)/bootpz.o $(obj)/misc.o +OBJ_bootlx := $(obj)/head.o $(obj)/stdio.o $(obj)/main.o +OBJ_bootph := $(obj)/head.o $(obj)/stdio.o $(obj)/bootp.o +OBJ_bootpzh := $(obj)/head.o $(obj)/stdio.o $(obj)/bootpz.o $(obj)/misc.o $(obj)/bootloader: $(obj)/bootloader.lds $(OBJ_bootlx) $(LIBS_Y) FORCE $(call if_changed,ld) diff --git a/arch/alpha/boot/main.c b/arch/alpha/boot/main.c index 3baf2d1e908d..dd6eb4a33582 100644 --- a/arch/alpha/boot/main.c +++ b/arch/alpha/boot/main.c @@ -19,7 +19,6 @@ #include "ksize.h" -extern int vsprintf(char *, const char *, va_list); extern unsigned long switch_to_osf_pal(unsigned long nr, struct pcb_struct * pcb_va, struct pcb_struct * pcb_pa, unsigned long *vptb); diff --git a/arch/alpha/boot/stdio.c b/arch/alpha/boot/stdio.c new file mode 100644 index 000000000000..f844dae8a54a --- /dev/null +++ b/arch/alpha/boot/stdio.c @@ -0,0 +1,306 @@ +/* + * Copyright (C) Paul Mackerras 1997. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include + +size_t strnlen(const char * s, size_t count) +{ + const char *sc; + + for (sc = s; count-- && *sc != '\0'; ++sc) + /* nothing */; + return sc - s; +} + +# define do_div(n, base) ({ \ + unsigned int __base = (base); \ + unsigned int __rem; \ + __rem = ((unsigned long long)(n)) % __base; \ + (n) = ((unsigned long long)(n)) / __base; \ + __rem; \ +}) + + +static int skip_atoi(const char **s) +{ + int i, c; + + for (i = 0; '0' <= (c = **s) && c <= '9'; ++*s) + i = i*10 + c - '0'; + return i; +} + +#define ZEROPAD 1 /* pad with zero */ +#define SIGN 2 /* unsigned/signed long */ +#define PLUS 4 /* show plus */ +#define SPACE 8 /* space if plus */ +#define LEFT 16 /* left justified */ +#define SPECIAL 32 /* 0x */ +#define LARGE 64 /* use 'ABCDEF' instead of 'abcdef' */ + +static char * number(char * str, unsigned long long num, int base, int size, int precision, int type) +{ + char c,sign,tmp[66]; + const char *digits="0123456789abcdefghijklmnopqrstuvwxyz"; + int i; + + if (type & LARGE) + digits = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"; + if (type & LEFT) + type &= ~ZEROPAD; + if (base < 2 || base > 36) + return 0; + c = (type & ZEROPAD) ? '0' : ' '; + sign = 0; + if (type & SIGN) { + if ((signed long long)num < 0) { + sign = '-'; + num = - (signed long long)num; + size--; + } else if (type & PLUS) { + sign = '+'; + size--; + } else if (type & SPACE) { + sign = ' '; + size--; + } + } + if (type & SPECIAL) { + if (base == 16) + size -= 2; + else if (base == 8) + size--; + } + i = 0; + if (num == 0) + tmp[i++]='0'; + else while (num != 0) { + tmp[i++] = digits[do_div(num, base)]; + } + if (i > precision) + precision = i; + size -= precision; + if (!(type&(ZEROPAD+LEFT))) + while(size-->0) + *str++ = ' '; + if (sign) + *str++ = sign; + if (type & SPECIAL) { + if (base==8) + *str++ = '0'; + else if (base==16) { + *str++ = '0'; + *str++ = digits[33]; + } + } + if (!(type & LEFT)) + while (size-- > 0) + *str++ = c; + while (i < precision--) + *str++ = '0'; + while (i-- > 0) + *str++ = tmp[i]; + while (size-- > 0) + *str++ = ' '; + return str; +} + +int vsprintf(char *buf, const char *fmt, va_list args) +{ + int len; + unsigned long long num; + int i, base; + char * str; + const char *s; + + int flags; /* flags to number() */ + + int field_width; /* width of output field */ + int precision; /* min. # of digits for integers; max + number of chars for from string */ + int qualifier; /* 'h', 'l', or 'L' for integer fields */ + /* 'z' support added 23/7/1999 S.H. */ + /* 'z' changed to 'Z' --davidm 1/25/99 */ + + + for (str=buf ; *fmt ; ++fmt) { + if (*fmt != '%') { + *str++ = *fmt; + continue; + } + + /* process flags */ + flags = 0; + repeat: + ++fmt; /* this also skips first '%' */ + switch (*fmt) { + case '-': flags |= LEFT; goto repeat; + case '+': flags |= PLUS; goto repeat; + case ' ': flags |= SPACE; goto repeat; + case '#': flags |= SPECIAL; goto repeat; + case '0': flags |= ZEROPAD; goto repeat; + } + + /* get field width */ + field_width = -1; + if ('0' <= *fmt && *fmt <= '9') + field_width = skip_atoi(&fmt); + else if (*fmt == '*') { + ++fmt; + /* it's the next argument */ + field_width = va_arg(args, int); + if (field_width < 0) { + field_width = -field_width; + flags |= LEFT; + } + } + + /* get the precision */ + precision = -1; + if (*fmt == '.') { + ++fmt; + if ('0' <= *fmt && *fmt <= '9') + precision = skip_atoi(&fmt); + else if (*fmt == '*') { + ++fmt; + /* it's the next argument */ + precision = va_arg(args, int); + } + if (precision < 0) + precision = 0; + } + + /* get the conversion qualifier */ + qualifier = -1; + if (*fmt == 'l' && *(fmt + 1) == 'l') { + qualifier = 'q'; + fmt += 2; + } else if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L' + || *fmt == 'Z') { + qualifier = *fmt; + ++fmt; + } + + /* default base */ + base = 10; + + switch (*fmt) { + case 'c': + if (!(flags & LEFT)) + while (--field_width > 0) + *str++ = ' '; + *str++ = (unsigned char) va_arg(args, int); + while (--field_width > 0) + *str++ = ' '; + continue; + + case 's': + s = va_arg(args, char *); + if (!s) + s = ""; + + len = strnlen(s, precision); + + if (!(flags & LEFT)) + while (len < field_width--) + *str++ = ' '; + for (i = 0; i < len; ++i) + *str++ = *s++; + while (len < field_width--) + *str++ = ' '; + continue; + + case 'p': + if (field_width == -1) { + field_width = 2*sizeof(void *); + flags |= ZEROPAD; + } + str = number(str, + (unsigned long) va_arg(args, void *), 16, + field_width, precision, flags); + continue; + + + case 'n': + if (qualifier == 'l') { + long * ip = va_arg(args, long *); + *ip = (str - buf); + } else if (qualifier == 'Z') { + size_t * ip = va_arg(args, size_t *); + *ip = (str - buf); + } else { + int * ip = va_arg(args, int *); + *ip = (str - buf); + } + continue; + + case '%': + *str++ = '%'; + continue; + + /* integer number formats - set up the flags and "break" */ + case 'o': + base = 8; + break; + + case 'X': + flags |= LARGE; + case 'x': + base = 16; + break; + + case 'd': + case 'i': + flags |= SIGN; + case 'u': + break; + + default: + *str++ = '%'; + if (*fmt) + *str++ = *fmt; + else + --fmt; + continue; + } + if (qualifier == 'l') { + num = va_arg(args, unsigned long); + if (flags & SIGN) + num = (signed long) num; + } else if (qualifier == 'q') { + num = va_arg(args, unsigned long long); + if (flags & SIGN) + num = (signed long long) num; + } else if (qualifier == 'Z') { + num = va_arg(args, size_t); + } else if (qualifier == 'h') { + num = (unsigned short) va_arg(args, int); + if (flags & SIGN) + num = (signed short) num; + } else { + num = va_arg(args, unsigned int); + if (flags & SIGN) + num = (signed int) num; + } + str = number(str, num, base, field_width, precision, flags); + } + *str = '\0'; + return str-buf; +} + +int sprintf(char * buf, const char *fmt, ...) +{ + va_list args; + int i; + + va_start(args, fmt); + i=vsprintf(buf,fmt,args); + va_end(args); + return i; +} diff --git a/arch/alpha/boot/tools/objstrip.c b/arch/alpha/boot/tools/objstrip.c index 367d53d031fc..dee82695f48b 100644 --- a/arch/alpha/boot/tools/objstrip.c +++ b/arch/alpha/boot/tools/objstrip.c @@ -27,6 +27,9 @@ #include #ifdef __ELF__ # include +# define elfhdr elf64_hdr +# define elf_phdr elf64_phdr +# define elf_check_arch(x) ((x)->e_machine == EM_ALPHA) #endif /* bootfile size must be multiple of BLOCK_SIZE: */ From 228fa858e5865c9407b0d6710fd504e0b68bc371 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Mon, 18 May 2015 12:36:50 +0800 Subject: [PATCH 253/337] alpha: Wire up all missing implemented syscalls And still left the missing unimplemented syscalls as warnings. The related warnings for missing implemented syscalls: CALL scripts/checksyscalls.sh :1241:2: warning: #warning syscall getrandom not implemented [-Wcpp] :1244:2: warning: #warning syscall memfd_create not implemented [-Wcpp] :1250:2: warning: #warning syscall execveat not implemented [-Wcpp] Signed-off-by: Chen Gang Signed-off-by: Matt Turner --- arch/alpha/include/asm/unistd.h | 2 +- arch/alpha/include/uapi/asm/unistd.h | 3 +++ arch/alpha/kernel/systbls.S | 3 +++ 3 files changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h index c509d306db45..a56e608db2f9 100644 --- a/arch/alpha/include/asm/unistd.h +++ b/arch/alpha/include/asm/unistd.h @@ -3,7 +3,7 @@ #include -#define NR_SYSCALLS 511 +#define NR_SYSCALLS 514 #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_STAT64 diff --git a/arch/alpha/include/uapi/asm/unistd.h b/arch/alpha/include/uapi/asm/unistd.h index d214a0358100..aa33bf5aacb6 100644 --- a/arch/alpha/include/uapi/asm/unistd.h +++ b/arch/alpha/include/uapi/asm/unistd.h @@ -472,5 +472,8 @@ #define __NR_sched_setattr 508 #define __NR_sched_getattr 509 #define __NR_renameat2 510 +#define __NR_getrandom 511 +#define __NR_memfd_create 512 +#define __NR_execveat 513 #endif /* _UAPI_ALPHA_UNISTD_H */ diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index 24789713f1ea..9b62e3fd4f03 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -529,6 +529,9 @@ sys_call_table: .quad sys_sched_setattr .quad sys_sched_getattr .quad sys_renameat2 /* 510 */ + .quad sys_getrandom + .quad sys_memfd_create + .quad sys_execveat .size sys_call_table, . - sys_call_table .type sys_call_table, @object From cceaeddc2edf710141563c65808b5cea6829b925 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Mon, 18 May 2015 12:37:08 +0800 Subject: [PATCH 254/337] alpha: kernel: osf_sys: Set 'kts.tv_nsec' only when 'tv' has effect The related warning: CC init/do_mounts.o arch/alpha/kernel/osf_sys.c: In function 'SyS_osf_settimeofday': arch/alpha/kernel/osf_sys.c:1028:14: warning: 'kts.tv_nsec' may be used uninitialized in this function [-Wmaybe-uninitialized] kts.tv_nsec *= 1000; ^ arch/alpha/kernel/osf_sys.c:1016:18: note: 'kts' was declared here struct timespec kts; ^ Signed-off-by: Chen Gang Signed-off-by: Matt Turner --- arch/alpha/kernel/osf_sys.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index e51f578636a5..36dc91ace83a 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -1019,14 +1019,13 @@ SYSCALL_DEFINE2(osf_settimeofday, struct timeval32 __user *, tv, if (tv) { if (get_tv32((struct timeval *)&kts, tv)) return -EFAULT; + kts.tv_nsec *= 1000; } if (tz) { if (copy_from_user(&ktz, tz, sizeof(*tz))) return -EFAULT; } - kts.tv_nsec *= 1000; - return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL); } From 983942a5eacae8821882a3d348618b020098e8dc Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Tue, 26 May 2015 09:51:49 -0500 Subject: [PATCH 255/337] amd-xgbe-phy: Fix initial mode when autoneg is disabled When the ethtool command is used to set the speed of the device while the device is down, the check to set the initial mode may fail when the device is brought up, causing failure to bring the device up. Update the code to set the initial mode based on the desired speed if auto-negotiation is disabled. This patch fixes a bug introduced by: d9663c8c2149 ("amd-xgbe-phy: Use phydev advertising field vs supported") Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/phy/amd-xgbe-phy.c | 45 +++++++++++++++++++++++++++++++--- 1 file changed, 42 insertions(+), 3 deletions(-) diff --git a/drivers/net/phy/amd-xgbe-phy.c b/drivers/net/phy/amd-xgbe-phy.c index fb276f64cd64..34a75cba3b73 100644 --- a/drivers/net/phy/amd-xgbe-phy.c +++ b/drivers/net/phy/amd-xgbe-phy.c @@ -755,6 +755,45 @@ static int amd_xgbe_phy_set_mode(struct phy_device *phydev, return ret; } +static bool amd_xgbe_phy_use_xgmii_mode(struct phy_device *phydev) +{ + if (phydev->autoneg == AUTONEG_ENABLE) { + if (phydev->advertising & ADVERTISED_10000baseKR_Full) + return true; + } else { + if (phydev->speed == SPEED_10000) + return true; + } + + return false; +} + +static bool amd_xgbe_phy_use_gmii_2500_mode(struct phy_device *phydev) +{ + if (phydev->autoneg == AUTONEG_ENABLE) { + if (phydev->advertising & ADVERTISED_2500baseX_Full) + return true; + } else { + if (phydev->speed == SPEED_2500) + return true; + } + + return false; +} + +static bool amd_xgbe_phy_use_gmii_mode(struct phy_device *phydev) +{ + if (phydev->autoneg == AUTONEG_ENABLE) { + if (phydev->advertising & ADVERTISED_1000baseKX_Full) + return true; + } else { + if (phydev->speed == SPEED_1000) + return true; + } + + return false; +} + static int amd_xgbe_phy_set_an(struct phy_device *phydev, bool enable, bool restart) { @@ -1235,11 +1274,11 @@ static int amd_xgbe_phy_config_init(struct phy_device *phydev) /* Set initial mode - call the mode setting routines * directly to insure we are properly configured */ - if (phydev->advertising & SUPPORTED_10000baseKR_Full) + if (amd_xgbe_phy_use_xgmii_mode(phydev)) ret = amd_xgbe_phy_xgmii_mode(phydev); - else if (phydev->advertising & SUPPORTED_1000baseKX_Full) + else if (amd_xgbe_phy_use_gmii_mode(phydev)) ret = amd_xgbe_phy_gmii_mode(phydev); - else if (phydev->advertising & SUPPORTED_2500baseX_Full) + else if (amd_xgbe_phy_use_gmii_2500_mode(phydev)) ret = amd_xgbe_phy_gmii_2500_mode(phydev); else ret = -EINVAL; From adba657533bdd255f7b78bc8a324091f46b294cd Mon Sep 17 00:00:00 2001 From: Chris Lesiak Date: Tue, 26 May 2015 15:40:44 -0500 Subject: [PATCH 256/337] hwmon: (ntc_thermistor) Ensure iio channel is of type IIO_VOLTAGE When configured via device tree, the associated iio device needs to be measuring voltage for the conversion to resistance to be correct. Return -EINVAL if that is not the case. Signed-off-by: Chris Lesiak Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Guenter Roeck --- drivers/hwmon/ntc_thermistor.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c index 112e4d45e4a0..68800115876b 100644 --- a/drivers/hwmon/ntc_thermistor.c +++ b/drivers/hwmon/ntc_thermistor.c @@ -239,8 +239,10 @@ static struct ntc_thermistor_platform_data * ntc_thermistor_parse_dt(struct platform_device *pdev) { struct iio_channel *chan; + enum iio_chan_type type; struct device_node *np = pdev->dev.of_node; struct ntc_thermistor_platform_data *pdata; + int ret; if (!np) return NULL; @@ -253,6 +255,13 @@ ntc_thermistor_parse_dt(struct platform_device *pdev) if (IS_ERR(chan)) return ERR_CAST(chan); + ret = iio_get_channel_type(chan, &type); + if (ret < 0) + return ERR_PTR(ret); + + if (type != IIO_VOLTAGE) + return ERR_PTR(-EINVAL); + if (of_property_read_u32(np, "pullup-uv", &pdata->pullup_uv)) return ERR_PTR(-ENODEV); if (of_property_read_u32(np, "pullup-ohm", &pdata->pullup_ohm)) From a10f0df0615abb194968fc08147f3cdd70fd5aa5 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 26 May 2015 18:01:05 -0400 Subject: [PATCH 257/337] drm/radeon: don't share plls if monitors differ in audio support Enabling audio may enable different pll dividers. Don't share plls if the monitors differ in audio support. bug: https://bugzilla.kernel.org/show_bug.cgi?id=98751 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/atombios_crtc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 42b2ea3fdcf3..e597ffc26563 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1798,7 +1798,9 @@ static int radeon_get_shared_nondp_ppll(struct drm_crtc *crtc) if ((crtc->mode.clock == test_crtc->mode.clock) && (adjusted_clock == test_adjusted_clock) && (radeon_crtc->ss_enabled == test_radeon_crtc->ss_enabled) && - (test_radeon_crtc->pll_id != ATOM_PPLL_INVALID)) + (test_radeon_crtc->pll_id != ATOM_PPLL_INVALID) && + (drm_detect_monitor_audio(radeon_connector_edid(test_radeon_crtc->connector)) == + drm_detect_monitor_audio(radeon_connector_edid(radeon_crtc->connector)))) return test_radeon_crtc->pll_id; } } From b48732e4a48d80ed4a14812f0bab09560846514e Mon Sep 17 00:00:00 2001 From: Mark Salyzyn Date: Tue, 26 May 2015 08:22:19 -0700 Subject: [PATCH 258/337] unix/caif: sk_socket can disappear when state is unlocked got a rare NULL pointer dereference in clear_bit Signed-off-by: Mark Salyzyn Acked-by: Hannes Frederic Sowa ---- v2: switch to sock_flag(sk, SOCK_DEAD) and added net/caif/caif_socket.c v3: return -ECONNRESET in upstream caller of wait function for SOCK_DEAD Signed-off-by: David S. Miller --- net/caif/caif_socket.c | 8 ++++++++ net/unix/af_unix.c | 8 ++++++++ 2 files changed, 16 insertions(+) diff --git a/net/caif/caif_socket.c b/net/caif/caif_socket.c index 4ec0c803aef1..112ad784838a 100644 --- a/net/caif/caif_socket.c +++ b/net/caif/caif_socket.c @@ -330,6 +330,10 @@ static long caif_stream_data_wait(struct sock *sk, long timeo) release_sock(sk); timeo = schedule_timeout(timeo); lock_sock(sk); + + if (sock_flag(sk, SOCK_DEAD)) + break; + clear_bit(SOCK_ASYNC_WAITDATA, &sk->sk_socket->flags); } @@ -373,6 +377,10 @@ static int caif_stream_recvmsg(struct socket *sock, struct msghdr *msg, struct sk_buff *skb; lock_sock(sk); + if (sock_flag(sk, SOCK_DEAD)) { + err = -ECONNRESET; + goto unlock; + } skb = skb_dequeue(&sk->sk_receive_queue); caif_check_flow_release(sk); diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 5266ea7b922b..06430598cf51 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -1880,6 +1880,10 @@ static long unix_stream_data_wait(struct sock *sk, long timeo, unix_state_unlock(sk); timeo = freezable_schedule_timeout(timeo); unix_state_lock(sk); + + if (sock_flag(sk, SOCK_DEAD)) + break; + clear_bit(SOCK_ASYNC_WAITDATA, &sk->sk_socket->flags); } @@ -1939,6 +1943,10 @@ static int unix_stream_recvmsg(struct socket *sock, struct msghdr *msg, struct sk_buff *skb, *last; unix_state_lock(sk); + if (sock_flag(sk, SOCK_DEAD)) { + err = -ECONNRESET; + goto unlock; + } last = skb = skb_peek(&sk->sk_receive_queue); again: if (skb == NULL) { From 082739aa458a74add9a2362988e5aca0367bfa53 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Mon, 25 May 2015 14:08:03 +0200 Subject: [PATCH 259/337] tools: bpf_jit_disasm: fix segfault on disabled debugging log output With recent debugging, I noticed that bpf_jit_disasm segfaults when there's no debugging output from the JIT compiler to the kernel log. Reason is that when regexec(3) doesn't match on anything, start/end offsets are not being filled out and contain some uninitialized garbage from stack. Thus, we need zero out offsets first. Signed-off-by: Daniel Borkmann Signed-off-by: David S. Miller --- tools/net/bpf_jit_disasm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/net/bpf_jit_disasm.c b/tools/net/bpf_jit_disasm.c index c5baf9c591b7..618c2bcd4eab 100644 --- a/tools/net/bpf_jit_disasm.c +++ b/tools/net/bpf_jit_disasm.c @@ -123,6 +123,8 @@ static int get_last_jit_image(char *haystack, size_t hlen, assert(ret == 0); ptr = haystack; + memset(pmatch, 0, sizeof(pmatch)); + while (1) { ret = regexec(®ex, ptr, 1, pmatch, 0); if (ret == 0) { From 748a7295d7242bc1aaaec0e245cc61f2be754766 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Tue, 26 May 2015 03:50:04 +0300 Subject: [PATCH 260/337] net: netxen: correct sysfs bin attribute return code If read() syscall requests unexpected number of bytes from "dimm" binary attribute file, return EINVAL instead of EPERM. At the same time pin down sysfs file size to the fixed sizeof(struct netxen_dimm_cfg), which allows to exploit some missing sanity checks from kernfs (file boundary checks vs offset etc.) Signed-off-by: Vladimir Zapolskiy Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c index e0c31e3947d1..6409a06bbdf6 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c @@ -3025,9 +3025,9 @@ netxen_sysfs_read_dimm(struct file *filp, struct kobject *kobj, u8 dw, rows, cols, banks, ranks; u32 val; - if (size != sizeof(struct netxen_dimm_cfg)) { + if (size < attr->size) { netdev_err(netdev, "Invalid size\n"); - return -1; + return -EINVAL; } memset(&dimm, 0, sizeof(struct netxen_dimm_cfg)); @@ -3137,7 +3137,7 @@ out: static struct bin_attribute bin_attr_dimm = { .attr = { .name = "dimm", .mode = (S_IRUGO | S_IWUSR) }, - .size = 0, + .size = sizeof(struct netxen_dimm_cfg), .read = netxen_sysfs_read_dimm, }; From 49fb18972581a781658a4637de76e6069ed5964e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 27 May 2015 08:37:19 +0200 Subject: [PATCH 261/337] ALSA: hda - Set stream_pm ops automatically by generic parser This allows user to test power_save_node feature via sysfs or patch firmware even on the codecs that don't specify it. It'll also save a few lines. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_generic.c | 5 ++++- sound/pci/hda/patch_realtek.c | 1 - sound/pci/hda/patch_sigmatel.c | 1 - sound/pci/hda/patch_via.c | 1 - 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index 1c8678775f40..ac0db1679f09 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -4926,9 +4926,12 @@ int snd_hda_gen_parse_auto_config(struct hda_codec *codec, dig_only: parse_digital(codec); - if (spec->power_down_unused || codec->power_save_node) + if (spec->power_down_unused || codec->power_save_node) { if (!codec->power_filter) codec->power_filter = snd_hda_gen_path_power_filter; + if (!codec->patch_ops.stream_pm) + codec->patch_ops.stream_pm = snd_hda_gen_stream_pm; + } if (!spec->no_analog && spec->beep_nid) { err = snd_hda_attach_beep_device(codec, spec->beep_nid); diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index fc0ccc78bdc7..e3bf72bb278c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5724,7 +5724,6 @@ static int patch_alc269(struct hda_codec *codec) set_beep_amp(spec, spec->gen.mixer_nid, 0x04, HDA_INPUT); codec->patch_ops = alc_patch_ops; - codec->patch_ops.stream_pm = snd_hda_gen_stream_pm; #ifdef CONFIG_PM codec->patch_ops.suspend = alc269_suspend; codec->patch_ops.resume = alc269_resume; diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 43c99ce4a520..0de0fd95144a 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4403,7 +4403,6 @@ static const struct hda_codec_ops stac_patch_ops = { #ifdef CONFIG_PM .suspend = stac_suspend, #endif - .stream_pm = snd_hda_gen_stream_pm, .reboot_notify = stac_shutup, }; diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index 31a95cca015d..742087ef378f 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -472,7 +472,6 @@ static const struct hda_codec_ops via_patch_ops = { .init = via_init, .free = via_free, .unsol_event = snd_hda_jack_unsol_event, - .stream_pm = snd_hda_gen_stream_pm, #ifdef CONFIG_PM .suspend = via_suspend, .check_power_status = via_check_power_status, From 634a603760c26d163ff92751d91ac7b859e879c4 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Tue, 26 May 2015 18:43:36 +0200 Subject: [PATCH 262/337] ARM: imx6: allow booting with old DT The GPC rewrite to IRQ domains has been on the premise that it may break suspend/resume for new kernels on old DT, but otherwise keep things working from a user perspective. This was an accepted compromise to be able to move the GIC cleanup forward. What actually happened was that booting a new kernel on an old DT crashes before even the console is up, so the user does not even see the warning that the DT is too old. The warning message suggests that this has been known before, which is clearly unacceptable. Fix the early crash by mapping the GPC memory space if the IRQ controller doesn't claim it. This keeps at least CPUidle and the needed CPU wakeup workarounds working. With this fixed the system is able to boot up properly minus the expected suspend/resume breakage. Signed-off-by: Lucas Stach Signed-off-by: Shawn Guo --- arch/arm/mach-imx/gpc.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index 4d60005e9277..bbf015056221 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -280,9 +280,15 @@ void __init imx_gpc_check_dt(void) struct device_node *np; np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc"); - if (WARN_ON(!np || - !of_find_property(np, "interrupt-controller", NULL))) - pr_warn("Outdated DT detected, system is about to crash!!!\n"); + if (WARN_ON(!np)) + return; + + if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) { + pr_warn("Outdated DT detected, suspend/resume will NOT work\n"); + + /* map GPC, so that at least CPUidle and WARs keep working */ + gpc_base = of_iomap(np, 0); + } } #ifdef CONFIG_PM_GENERIC_DOMAINS From b17c70cd9211e9bbcd77a489f9c60f3d1bd4c392 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 27 May 2015 10:10:26 +0200 Subject: [PATCH 263/337] ARM: imx6: gpc: don't register power domain if DT data is missing If the devicetree is too old and does not provide the regulator and clocks for the power domain, we need to avoid registering the power domain. Otherwise runtime PM will try to control the domain, which will lead to machine hangs without the proper DT configuration data. This restores functionality to the kernel 4.0 level if an old DT is detected, where the power domain is constantly powered on. Signed-off-by: Lucas Stach Signed-off-by: Shawn Guo --- arch/arm/mach-imx/gpc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index bbf015056221..6d0893a3828e 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -449,6 +449,10 @@ static int imx_gpc_probe(struct platform_device *pdev) struct regulator *pu_reg; int ret; + /* bail out if DT too old and doesn't provide the necessary info */ + if (!of_property_read_bool(pdev->dev.of_node, "#power-domain-cells")) + return 0; + pu_reg = devm_regulator_get_optional(&pdev->dev, "pu"); if (PTR_ERR(pu_reg) == -ENODEV) pu_reg = NULL; From e0c21530fa91f119bfca19640a67380c6b14f12a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 15 May 2015 16:27:40 +0200 Subject: [PATCH 264/337] mfd: da9052: Fix broken regulator probe Fix broken probe of da9052 regulators, which since commit b3f6c73db732 ("mfd: da9052-core: Fix platform-device id collision") use a non-deterministic platform-device id to retrieve static regulator information. Fortunately, adequate error handling was in place so probe would simply fail with an error message. Update the mfd-cell ids to be zero-based and use those to identify the cells when probing the regulator devices. Fixes: b3f6c73db732 ("mfd: da9052-core: Fix platform-device id collision") Cc: stable # v3.19 Signed-off-by: Johan Hovold Acked-by: Bartlomiej Zolnierkiewicz Reviewed-by: Mark Brown Signed-off-by: Lee Jones --- drivers/mfd/da9052-core.c | 8 ++++---- drivers/regulator/da9052-regulator.c | 5 +++-- 2 files changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/mfd/da9052-core.c b/drivers/mfd/da9052-core.c index ae498b53ee40..46e3840c7a37 100644 --- a/drivers/mfd/da9052-core.c +++ b/drivers/mfd/da9052-core.c @@ -431,6 +431,10 @@ int da9052_adc_read_temp(struct da9052 *da9052) EXPORT_SYMBOL_GPL(da9052_adc_read_temp); static const struct mfd_cell da9052_subdev_info[] = { + { + .name = "da9052-regulator", + .id = 0, + }, { .name = "da9052-regulator", .id = 1, @@ -483,10 +487,6 @@ static const struct mfd_cell da9052_subdev_info[] = { .name = "da9052-regulator", .id = 13, }, - { - .name = "da9052-regulator", - .id = 14, - }, { .name = "da9052-onkey", }, diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c index 8a4df7a1f2ee..e628d4c2f2ae 100644 --- a/drivers/regulator/da9052-regulator.c +++ b/drivers/regulator/da9052-regulator.c @@ -394,6 +394,7 @@ static inline struct da9052_regulator_info *find_regulator_info(u8 chip_id, static int da9052_regulator_probe(struct platform_device *pdev) { + const struct mfd_cell *cell = mfd_get_cell(pdev); struct regulator_config config = { }; struct da9052_regulator *regulator; struct da9052 *da9052; @@ -409,7 +410,7 @@ static int da9052_regulator_probe(struct platform_device *pdev) regulator->da9052 = da9052; regulator->info = find_regulator_info(regulator->da9052->chip_id, - pdev->id); + cell->id); if (regulator->info == NULL) { dev_err(&pdev->dev, "invalid regulator ID specified\n"); return -EINVAL; @@ -419,7 +420,7 @@ static int da9052_regulator_probe(struct platform_device *pdev) config.driver_data = regulator; config.regmap = da9052->regmap; if (pdata && pdata->regulators) { - config.init_data = pdata->regulators[pdev->id]; + config.init_data = pdata->regulators[cell->id]; } else { #ifdef CONFIG_OF struct device_node *nproot = da9052->dev->of_node; From 3a1407559a593d4360af12dd2df5296bf8eb0d28 Mon Sep 17 00:00:00 2001 From: Junichi Nomura Date: Wed, 27 May 2015 04:22:07 +0000 Subject: [PATCH 265/337] dm: fix NULL pointer when clone_and_map_rq returns !DM_MAPIO_REMAPPED When stacking request-based DM on blk_mq device, request cloning and remapping are done in a single call to target's clone_and_map_rq(). The clone is allocated and valid only if clone_and_map_rq() returns DM_MAPIO_REMAPPED. The "IS_ERR(clone)" check in map_request() does not cover all the !DM_MAPIO_REMAPPED cases that are possible (E.g. if underlying devices are not ready or unavailable, clone_and_map_rq() may return DM_MAPIO_REQUEUE without ever having established an ERR_PTR). Fix this by explicitly checking for a return that is not DM_MAPIO_REMAPPED in map_request(). Without this fix, DM core may call setup_clone() for a NULL clone and oops like this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000068 IP: [] blk_rq_prep_clone+0x7d/0x137 ... CPU: 2 PID: 5793 Comm: kdmwork-253:3 Not tainted 4.0.0-nm #1 ... Call Trace: [] map_tio_request+0xa9/0x258 [dm_mod] [] kthread_worker_fn+0xfd/0x150 [] ? kthread_parkme+0x24/0x24 [] ? kthread_parkme+0x24/0x24 [] kthread+0xe6/0xee [] ? put_lock_stats+0xe/0x20 [] ? __init_kthread_worker+0x5b/0x5b [] ret_from_fork+0x58/0x90 [] ? __init_kthread_worker+0x5b/0x5b Fixes: e5863d9ad ("dm: allocate requests in target when stacking on blk-mq devices") Reported-by: Bart Van Assche Signed-off-by: Jun'ichi Nomura Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org # 4.0+ --- drivers/md/dm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 0bf79a0bad37..1c62ed8d09f4 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1972,8 +1972,8 @@ static int map_request(struct dm_rq_target_io *tio, struct request *rq, dm_kill_unmapped_request(rq, r); return r; } - if (IS_ERR(clone)) - return DM_MAPIO_REQUEUE; + if (r != DM_MAPIO_REMAPPED) + return r; if (setup_clone(clone, rq, tio, GFP_ATOMIC)) { /* -ENOMEM */ ti->type->release_clone_rq(clone); From 0fa372b6c95013af1334b3d5c9b5f03a70ecedab Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 27 May 2015 16:17:19 +0200 Subject: [PATCH 266/337] ALSA: hda - Fix noise on AMD radeon 290x controller A new AMD controller [1002:aac8] seems to need the quirk for other AMD NS HDMI stuff, otherwise it gives noisy sounds. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=99021 Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 34040d26c94f..fea198c58196 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2089,6 +2089,8 @@ static const struct pci_device_id azx_ids[] = { .driver_data = AZX_DRIVER_ATIHDMI_NS | AZX_DCAPS_PRESET_ATI_HDMI_NS }, { PCI_DEVICE(0x1002, 0xaab0), .driver_data = AZX_DRIVER_ATIHDMI_NS | AZX_DCAPS_PRESET_ATI_HDMI_NS }, + { PCI_DEVICE(0x1002, 0xaac8), + .driver_data = AZX_DRIVER_ATIHDMI_NS | AZX_DCAPS_PRESET_ATI_HDMI_NS }, /* VIA VT8251/VT8237A */ { PCI_DEVICE(0x1106, 0x3288), .driver_data = AZX_DRIVER_VIA | AZX_DCAPS_POSFIX_VIA }, From 2d1c18bba15daf89d75ce475ecd2068f483aa12f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 27 May 2015 11:43:53 -0400 Subject: [PATCH 267/337] Revert "drm/radeon: only mark audio as connected if the monitor supports it (v3)" This breaks too many things. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=99041 https://bugs.freedesktop.org/show_bug.cgi?id=90681 This reverts commit 0f55db36d49d45b80eff0c0a2a498766016f458b. Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_audio.c | 27 ++++++++++------------ drivers/gpu/drm/radeon/radeon_connectors.c | 8 ++----- 2 files changed, 14 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_audio.c b/drivers/gpu/drm/radeon/radeon_audio.c index dcb779647c57..25191f126f3b 100644 --- a/drivers/gpu/drm/radeon/radeon_audio.c +++ b/drivers/gpu/drm/radeon/radeon_audio.c @@ -460,9 +460,6 @@ void radeon_audio_detect(struct drm_connector *connector, if (!connector || !connector->encoder) return; - if (!radeon_encoder_is_digital(connector->encoder)) - return; - rdev = connector->encoder->dev->dev_private; if (!radeon_audio_chipset_supported(rdev)) @@ -471,26 +468,26 @@ void radeon_audio_detect(struct drm_connector *connector, radeon_encoder = to_radeon_encoder(connector->encoder); dig = radeon_encoder->enc_priv; - if (!dig->afmt) - return; - if (status == connector_status_connected) { - struct radeon_connector *radeon_connector = to_radeon_connector(connector); + struct radeon_connector *radeon_connector; + int sink_type; + + if (!drm_detect_monitor_audio(radeon_connector_edid(connector))) { + radeon_encoder->audio = NULL; + return; + } + + radeon_connector = to_radeon_connector(connector); + sink_type = radeon_dp_getsinktype(radeon_connector); if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort && - radeon_dp_getsinktype(radeon_connector) == - CONNECTOR_OBJECT_ID_DISPLAYPORT) + sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) radeon_encoder->audio = rdev->audio.dp_funcs; else radeon_encoder->audio = rdev->audio.hdmi_funcs; dig->afmt->pin = radeon_audio_get_pin(connector->encoder); - if (drm_detect_monitor_audio(radeon_connector_edid(connector))) { - radeon_audio_enable(rdev, dig->afmt->pin, 0xf); - } else { - radeon_audio_enable(rdev, dig->afmt->pin, 0); - dig->afmt->pin = NULL; - } + radeon_audio_enable(rdev, dig->afmt->pin, 0xf); } else { radeon_audio_enable(rdev, dig->afmt->pin, 0); dig->afmt->pin = NULL; diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index d17d251dbd4f..cebb65e07e1d 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -1379,10 +1379,8 @@ out: /* updated in get modes as well since we need to know if it's analog or digital */ radeon_connector_update_scratch_regs(connector, ret); - if (radeon_audio != 0) { - radeon_connector_get_edid(connector); + if (radeon_audio != 0) radeon_audio_detect(connector, ret); - } exit: pm_runtime_mark_last_busy(connector->dev->dev); @@ -1719,10 +1717,8 @@ radeon_dp_detect(struct drm_connector *connector, bool force) radeon_connector_update_scratch_regs(connector, ret); - if (radeon_audio != 0) { - radeon_connector_get_edid(connector); + if (radeon_audio != 0) radeon_audio_detect(connector, ret); - } out: pm_runtime_mark_last_busy(connector->dev->dev); From ce0e5c522d3924090c20e774359809a7aa08c44c Mon Sep 17 00:00:00 2001 From: Ross Lagerwall Date: Wed, 27 May 2015 11:44:32 +0100 Subject: [PATCH 268/337] xen/netback: Properly initialize credit_bytes Commit e9ce7cb6b107 ("xen-netback: Factor queue-specific data into queue struct") introduced a regression when moving queue-specific data into the queue struct by failing to set the credit_bytes field. This prevented bandwidth limiting from working. Initialize the field as it was done before multiqueue support was added. Signed-off-by: Ross Lagerwall Acked-by: Wei Liu Signed-off-by: David S. Miller --- drivers/net/xen-netback/xenbus.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c index 3d8dbf5f2d39..fee02414529e 100644 --- a/drivers/net/xen-netback/xenbus.c +++ b/drivers/net/xen-netback/xenbus.c @@ -793,6 +793,7 @@ static void connect(struct backend_info *be) goto err; } + queue->credit_bytes = credit_bytes; queue->remaining_credit = credit_bytes; queue->credit_usec = credit_usec; From 83a35114d0e4583e6b0ca39502e68b6a92e2910c Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Wed, 27 May 2015 10:59:26 +0930 Subject: [PATCH 269/337] lguest: fix out-by-one error in address checking. This bug has been there since day 1; addresses in the top guest physical page weren't considered valid. You could map that page (the check in check_gpte() is correct), but if a guest tried to put a pagetable there we'd check that address manually when walking it, and kill the guest. Signed-off-by: Rusty Russell Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- drivers/lguest/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c index 7dc93aa004c8..312ffd3d0017 100644 --- a/drivers/lguest/core.c +++ b/drivers/lguest/core.c @@ -173,7 +173,7 @@ static void unmap_switcher(void) bool lguest_address_ok(const struct lguest *lg, unsigned long addr, unsigned long len) { - return (addr+len) / PAGE_SIZE < lg->pfn_limit && (addr+len >= addr); + return addr+len <= lg->pfn_limit * PAGE_SIZE && (addr+len >= addr); } /* From f4ecf29fd78d19a9301e638eaa1419e5c8fbdce1 Mon Sep 17 00:00:00 2001 From: Benjamin Poirier Date: Fri, 22 May 2015 16:12:26 -0700 Subject: [PATCH 270/337] mlx4_core: Fix fallback from MSI-X to INTx The test in mlx4_load_one() to remove MLX4_FLAG_MSI_X expects mlx4_NOP() to fail with -EBUSY. It is also necessary to avoid the reset since the device is not fully reinitialized before calling mlx4_start_hca() a second time. Note that this will also affect mlx4_test_interrupts(), the only other user of MLX4_CMD_NOP. Fixes: f5aef5a ("net/mlx4_core: Activate reset flow upon fatal command cases") Signed-off-by: Benjamin Poirier Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/cmd.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c index 4f7dc044601e..529ef0594b90 100644 --- a/drivers/net/ethernet/mellanox/mlx4/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c @@ -714,8 +714,13 @@ static int mlx4_cmd_wait(struct mlx4_dev *dev, u64 in_param, u64 *out_param, msecs_to_jiffies(timeout))) { mlx4_warn(dev, "command 0x%x timed out (go bit not cleared)\n", op); - err = -EIO; - goto out_reset; + if (op == MLX4_CMD_NOP) { + err = -EBUSY; + goto out; + } else { + err = -EIO; + goto out_reset; + } } err = context->result; From fbfd3bc7dfd7efcad2d2e52bf634f84c80a77a35 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 27 May 2015 11:33:26 -0400 Subject: [PATCH 271/337] drm/radeon/audio: make sure connector is valid in hotplug case Avoids a crash when a monitor is hotplugged and the encoder and connector are not linked yet. bug: https://bugs.freedesktop.org/show_bug.cgi?id=90681 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/evergreen_hdmi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c index 0926739c9fa7..9953356fe263 100644 --- a/drivers/gpu/drm/radeon/evergreen_hdmi.c +++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c @@ -400,7 +400,7 @@ void evergreen_hdmi_enable(struct drm_encoder *encoder, bool enable) if (enable) { struct drm_connector *connector = radeon_get_connector_for_encoder(encoder); - if (drm_detect_monitor_audio(radeon_connector_edid(connector))) { + if (connector && drm_detect_monitor_audio(radeon_connector_edid(connector))) { WREG32(HDMI_INFOFRAME_CONTROL0 + dig->afmt->offset, HDMI_AVI_INFO_SEND | /* enable AVI info frames */ HDMI_AVI_INFO_CONT | /* required for audio info values to be updated */ @@ -438,7 +438,8 @@ void evergreen_dp_enable(struct drm_encoder *encoder, bool enable) if (!dig || !dig->afmt) return; - if (enable && drm_detect_monitor_audio(radeon_connector_edid(connector))) { + if (enable && connector && + drm_detect_monitor_audio(radeon_connector_edid(connector))) { struct drm_connector *connector = radeon_get_connector_for_encoder(encoder); struct radeon_connector *radeon_connector = to_radeon_connector(connector); struct radeon_connector_atom_dig *dig_connector; From ad0681185770716523c81b156c44b9804d7b8ed2 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Wed, 27 May 2015 15:46:10 +0100 Subject: [PATCH 272/337] xen-netfront: properly destroy queues when removing device xennet_remove() freed the queues before freeing the netdevice which results in a use-after-free when free_netdev() tries to delete the napi instances that have already been freed. Fix this by fully destroy the queues (which includes deleting the napi instances) before freeing the netdevice. Signed-off-by: David Vrabel Reviewed-by: Boris Ostrovsky Signed-off-by: David S. Miller --- drivers/net/xen-netfront.c | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-) diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 3f45afd4382e..e031c943286e 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -1698,6 +1698,7 @@ static void xennet_destroy_queues(struct netfront_info *info) if (netif_running(info->netdev)) napi_disable(&queue->napi); + del_timer_sync(&queue->rx_refill_timer); netif_napi_del(&queue->napi); } @@ -2102,9 +2103,6 @@ static const struct attribute_group xennet_dev_group = { static int xennet_remove(struct xenbus_device *dev) { struct netfront_info *info = dev_get_drvdata(&dev->dev); - unsigned int num_queues = info->netdev->real_num_tx_queues; - struct netfront_queue *queue = NULL; - unsigned int i = 0; dev_dbg(&dev->dev, "%s\n", dev->nodename); @@ -2112,16 +2110,7 @@ static int xennet_remove(struct xenbus_device *dev) unregister_netdev(info->netdev); - for (i = 0; i < num_queues; ++i) { - queue = &info->queues[i]; - del_timer_sync(&queue->rx_refill_timer); - } - - if (num_queues) { - kfree(info->queues); - info->queues = NULL; - } - + xennet_destroy_queues(info); xennet_free_netdev(info->netdev); return 0; From 86e363dc3b50bfd50a1f315934583fbda673ab8d Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Tue, 26 May 2015 16:08:48 -0700 Subject: [PATCH 273/337] net_sched: invoke ->attach() after setting dev->qdisc For mq qdisc, we add per tx queue qdisc to root qdisc for display purpose, however, that happens too early, before the new dev->qdisc is finally set, this causes q->list points to an old root qdisc which is going to be freed right before assigning with a new one. Fix this by moving ->attach() after setting dev->qdisc. For the record, this fixes the following crash: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 975 at lib/list_debug.c:59 __list_del_entry+0x5a/0x98() list_del corruption. prev->next should be ffff8800d1998ae8, but was 6b6b6b6b6b6b6b6b CPU: 1 PID: 975 Comm: tc Not tainted 4.1.0-rc4+ #1019 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 0000000000000009 ffff8800d73fb928 ffffffff81a44e7f 0000000047574756 ffff8800d73fb978 ffff8800d73fb968 ffffffff810790da ffff8800cfc4cd20 ffffffff814e725b ffff8800d1998ae8 ffffffff82381250 0000000000000000 Call Trace: [] dump_stack+0x4c/0x65 [] warn_slowpath_common+0x9c/0xb6 [] ? __list_del_entry+0x5a/0x98 [] warn_slowpath_fmt+0x46/0x48 [] ? dev_graft_qdisc+0x5e/0x6a [] __list_del_entry+0x5a/0x98 [] list_del+0xe/0x2d [] qdisc_list_del+0x1e/0x20 [] qdisc_destroy+0x30/0xd6 [] qdisc_graft+0x11d/0x243 [] tc_get_qdisc+0x1a6/0x1d4 [] ? mark_lock+0x2e/0x226 [] rtnetlink_rcv_msg+0x181/0x194 [] ? rtnl_lock+0x17/0x19 [] ? rtnl_lock+0x17/0x19 [] ? __rtnl_unlock+0x17/0x17 [] netlink_rcv_skb+0x4d/0x93 [] rtnetlink_rcv+0x26/0x2d [] netlink_unicast+0xcb/0x150 [] ? might_fault+0x59/0xa9 [] netlink_sendmsg+0x4fa/0x51c [] sock_sendmsg_nosec+0x12/0x1d [] sock_sendmsg+0x29/0x2e [] ___sys_sendmsg+0x1b4/0x23a [] ? native_sched_clock+0x35/0x37 [] ? sched_clock_local+0x12/0x72 [] ? sched_clock_cpu+0x9e/0xb7 [] ? current_kernel_time+0xe/0x32 [] ? lock_release_holdtime.part.29+0x71/0x7f [] ? read_seqcount_begin.constprop.27+0x5f/0x76 [] ? trace_hardirqs_on_caller+0x17d/0x199 [] ? __fget_light+0x50/0x78 [] __sys_sendmsg+0x42/0x60 [] SyS_sendmsg+0x12/0x1c [] system_call_fastpath+0x12/0x6f ---[ end trace ef29d3fb28e97ae7 ]--- For long term, we probably need to clean up the qdisc_graft() code in case it hides other bugs like this. Fixes: 95dc19299f74 ("pkt_sched: give visibility to mq slave qdiscs") Cc: Jamal Hadi Salim Signed-off-by: Cong Wang Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/sched/sch_api.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index ad9eed70bc8f..1e1c89e51a11 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -815,10 +815,8 @@ static int qdisc_graft(struct net_device *dev, struct Qdisc *parent, if (dev->flags & IFF_UP) dev_deactivate(dev); - if (new && new->ops->attach) { - new->ops->attach(new); - num_q = 0; - } + if (new && new->ops->attach) + goto skip; for (i = 0; i < num_q; i++) { struct netdev_queue *dev_queue = dev_ingress_queue(dev); @@ -834,12 +832,16 @@ static int qdisc_graft(struct net_device *dev, struct Qdisc *parent, qdisc_destroy(old); } +skip: if (!ingress) { notify_and_destroy(net, skb, n, classid, dev->qdisc, new); if (new && !new->ops->attach) atomic_inc(&new->refcnt); dev->qdisc = new ? : &noop_qdisc; + + if (new && new->ops->attach) + new->ops->attach(new); } else { notify_and_destroy(net, skb, n, classid, old, new); } From 9302d7bb0c5cd46be5706859301f18c137b2439f Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Tue, 26 May 2015 17:30:17 -0600 Subject: [PATCH 274/337] sctp: Fix mangled IPv4 addresses on a IPv6 listening socket sctp_v4_map_v6 was subtly writing and reading from members of a union in a way the clobbered data it needed to read before it read it. Zeroing the v6 flowinfo overwrites the v4 sin_addr with 0, meaning that every place that calls sctp_v4_map_v6 gets ::ffff:0.0.0.0 as the result. Reorder things to guarantee correct behaviour no matter what the union layout is. This impacts user space clients that open an IPv6 SCTP socket and receive IPv4 connections. Prior to 299ee user space would see a sockaddr with AF_INET and a correct address, after 299ee the sockaddr is AF_INET6, but the address is wrong. Fixes: 299ee123e198 (sctp: Fixup v4mapped behaviour to comply with Sock API) Signed-off-by: Jason Gunthorpe Acked-by: Daniel Borkmann Acked-by: Neil Horman Signed-off-by: David S. Miller --- include/net/sctp/sctp.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h index c56a438c3a1e..ce13cf20f625 100644 --- a/include/net/sctp/sctp.h +++ b/include/net/sctp/sctp.h @@ -574,11 +574,14 @@ static inline void sctp_v6_map_v4(union sctp_addr *addr) /* Map v4 address to v4-mapped v6 address */ static inline void sctp_v4_map_v6(union sctp_addr *addr) { + __be16 port; + + port = addr->v4.sin_port; + addr->v6.sin6_addr.s6_addr32[3] = addr->v4.sin_addr.s_addr; + addr->v6.sin6_port = port; addr->v6.sin6_family = AF_INET6; addr->v6.sin6_flowinfo = 0; addr->v6.sin6_scope_id = 0; - addr->v6.sin6_port = addr->v4.sin_port; - addr->v6.sin6_addr.s6_addr32[3] = addr->v4.sin_addr.s_addr; addr->v6.sin6_addr.s6_addr32[0] = 0; addr->v6.sin6_addr.s6_addr32[1] = 0; addr->v6.sin6_addr.s6_addr32[2] = htonl(0x0000ffff); From c545f799c7470682756ca64c63f6bfcdaf28442b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 27 May 2015 21:20:12 +0200 Subject: [PATCH 275/337] ALSA: hda - Disable power_save_node for IDT92HD71bxx We've got a regression report that 4.1-rc causes noises on a Dell laptop. Similar like Realtek codec, this seems also triggered by the recent power_save_node feature. As this kind of issue is quite hard to debug without actual hardware, disable the power_save_node flag for this codec as a workaround. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98971 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 0de0fd95144a..6833c74ed6ff 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4696,7 +4696,8 @@ static int patch_stac92hd71bxx(struct hda_codec *codec) return err; spec = codec->spec; - codec->power_save_node = 1; + /* disabled power_save_node since it causes noises on a Dell machine */ + /* codec->power_save_node = 1; */ spec->linear_tone_beep = 0; spec->gen.own_eapd_ctl = 1; spec->gen.power_down_unused = 1; From e275b3885dffd31095984ed2476ed0447fa7309a Mon Sep 17 00:00:00 2001 From: Dasaratharaman Chandramouli Date: Wed, 15 Apr 2015 10:09:50 -0700 Subject: [PATCH 276/337] tools/power turbostat: correctly display more than 2 threads/core Without this update, turbostat displays only 2 threads per core. Some processors, such as Xeon Phi, have more. Signed-off-by: Dasaratharaman Chandramouli Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 71 +++++++++++++++++++-------- 1 file changed, 51 insertions(+), 20 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index bac98ca3d4ca..d85adbafbe60 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -1381,12 +1381,41 @@ int parse_int_file(const char *fmt, ...) } /* - * cpu_is_first_sibling_in_core(cpu) - * return 1 if given CPU is 1st HT sibling in the core + * get_cpu_position_in_core(cpu) + * return the position of the CPU among its HT siblings in the core + * return -1 if the sibling is not in list */ -int cpu_is_first_sibling_in_core(int cpu) +int get_cpu_position_in_core(int cpu) { - return cpu == parse_int_file("/sys/devices/system/cpu/cpu%d/topology/thread_siblings_list", cpu); + char path[64]; + FILE *filep; + int this_cpu; + char character; + int i; + + sprintf(path, + "/sys/devices/system/cpu/cpu%d/topology/thread_siblings_list", + cpu); + filep = fopen(path, "r"); + if (filep == NULL) { + perror(path); + exit(1); + } + + for (i = 0; i < topo.num_threads_per_core; i++) { + fscanf(filep, "%d", &this_cpu); + if (this_cpu == cpu) { + fclose(filep); + return i; + } + + /* Account for no separator after last thread*/ + if (i != (topo.num_threads_per_core - 1)) + fscanf(filep, "%c", &character); + } + + fclose(filep); + return -1; } /* @@ -1412,25 +1441,31 @@ int get_num_ht_siblings(int cpu) { char path[80]; FILE *filep; - int sib1, sib2; - int matches; + int sib1; + int matches = 0; char character; + char str[100]; + char *ch; sprintf(path, "/sys/devices/system/cpu/cpu%d/topology/thread_siblings_list", cpu); filep = fopen_or_die(path, "r"); + /* * file format: - * if a pair of number with a character between: 2 siblings (eg. 1-2, or 1,4) - * otherwinse 1 sibling (self). + * A ',' separated or '-' separated set of numbers + * (eg 1-2 or 1,3,4,5) */ - matches = fscanf(filep, "%d%c%d\n", &sib1, &character, &sib2); + fscanf(filep, "%d%c\n", &sib1, &character); + fseek(filep, 0, SEEK_SET); + fgets(str, 100, filep); + ch = strchr(str, character); + while (ch != NULL) { + matches++; + ch = strchr(ch+1, character); + } fclose(filep); - - if (matches == 3) - return 2; - else - return 1; + return matches+1; } /* @@ -2755,13 +2790,9 @@ int initialize_counters(int cpu_id) my_package_id = get_physical_package_id(cpu_id); my_core_id = get_core_id(cpu_id); - - if (cpu_is_first_sibling_in_core(cpu_id)) { - my_thread_id = 0; + my_thread_id = get_cpu_position_in_core(cpu_id); + if (!my_thread_id) topo.num_cores++; - } else { - my_thread_id = 1; - } init_counter(EVEN_COUNTERS, my_thread_id, my_core_id, my_package_id, cpu_id); init_counter(ODD_COUNTERS, my_thread_id, my_core_id, my_package_id, cpu_id); From 4c6dd53dd3674c310d7379c6b3273daa9fd95c79 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Wed, 27 May 2015 15:23:56 -0400 Subject: [PATCH 277/337] dm mpath: fix leak of dm_mpath_io structure in blk-mq .queue_rq error path Otherwise kmemleak reported: unreferenced object 0xffff88009b14e2b0 (size 16): comm "fio", pid 4274, jiffies 4294978034 (age 1253.210s) hex dump (first 16 bytes): 40 12 f3 99 01 88 ff ff 00 10 00 00 00 00 00 00 @............... backtrace: [] kmemleak_alloc+0x49/0xb0 [] kmem_cache_alloc+0xf8/0x160 [] mempool_alloc_slab+0x10/0x20 [] mempool_alloc+0x57/0x150 [] __multipath_map.isra.17+0xe1/0x220 [dm_multipath] [] multipath_clone_and_map+0x15/0x20 [dm_multipath] [] map_request.isra.39+0xd5/0x220 [dm_mod] [] dm_mq_queue_rq+0x134/0x240 [dm_mod] [] __blk_mq_run_hw_queue+0x1d5/0x380 [] blk_mq_run_hw_queue+0xc5/0x100 [] blk_sq_make_request+0x240/0x300 [] generic_make_request+0xc0/0x110 [] submit_bio+0x72/0x150 [] do_blockdev_direct_IO+0x1f3b/0x2da0 [] __blockdev_direct_IO+0x3e/0x40 [] ext4_direct_IO+0x1aa/0x390 Fixes: e5863d9ad ("dm: allocate requests in target when stacking on blk-mq devices") Reported-by: Bart Van Assche Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org # 4.0+ --- drivers/md/dm-mpath.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 63953477a07c..eff7bdd7731d 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -429,9 +429,11 @@ static int __multipath_map(struct dm_target *ti, struct request *clone, /* blk-mq request-based interface */ *__clone = blk_get_request(bdev_get_queue(bdev), rq_data_dir(rq), GFP_ATOMIC); - if (IS_ERR(*__clone)) + if (IS_ERR(*__clone)) { /* ENOMEM, requeue */ + clear_mapinfo(m, map_context); return r; + } (*__clone)->bio = (*__clone)->biotail = NULL; (*__clone)->rq_disk = bdev->bd_disk; (*__clone)->cmd_flags |= REQ_FAILFAST_TRANSPORT; From 45714fbed4556149d7f1730f5bae74f81d5e2cd5 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Wed, 27 May 2015 15:25:27 -0400 Subject: [PATCH 278/337] dm: requeue from blk-mq dm_mq_queue_rq() using BLK_MQ_RQ_QUEUE_BUSY Use BLK_MQ_RQ_QUEUE_BUSY to requeue a blk-mq request directly from the DM blk-mq device's .queue_rq. This cleans up the previous convoluted handling of request requeueing that would return BLK_MQ_RQ_QUEUE_OK (even though it wasn't) and then run blk_mq_requeue_request() followed by blk_mq_kick_requeue_list(). Also, document that DM blk-mq ontop of old request_fn devices cannot fail in clone_rq() since the clone request is preallocated as part of the pdu. Reported-by: Christoph Hellwig Signed-off-by: Mike Snitzer --- drivers/md/dm.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 1c62ed8d09f4..1badfb250a18 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -2754,13 +2754,15 @@ static int dm_mq_queue_rq(struct blk_mq_hw_ctx *hctx, if (dm_table_get_type(map) == DM_TYPE_REQUEST_BASED) { /* clone request is allocated at the end of the pdu */ tio->clone = (void *)blk_mq_rq_to_pdu(rq) + sizeof(struct dm_rq_target_io); - if (!clone_rq(rq, md, tio, GFP_ATOMIC)) - return BLK_MQ_RQ_QUEUE_BUSY; + (void) clone_rq(rq, md, tio, GFP_ATOMIC); queue_kthread_work(&md->kworker, &tio->work); } else { /* Direct call is fine since .queue_rq allows allocations */ - if (map_request(tio, rq, md) == DM_MAPIO_REQUEUE) - dm_requeue_unmapped_original_request(md, rq); + if (map_request(tio, rq, md) == DM_MAPIO_REQUEUE) { + /* Undo dm_start_request() before requeuing */ + rq_completed(md, rq_data_dir(rq), false); + return BLK_MQ_RQ_QUEUE_BUSY; + } } return BLK_MQ_RQ_QUEUE_OK; From fb5d432722e186c656285ccc088e35dbe24f6fd1 Mon Sep 17 00:00:00 2001 From: Dasaratharaman Chandramouli Date: Wed, 20 May 2015 09:49:34 -0700 Subject: [PATCH 279/337] tools/power turbostat: enable turbostat to support Knights Landing (KNL) Changes mainly to account for minor differences in Knights Landing(KNL): 1. KNL supports C1 and C6 core states. 2. KNL supports PC2, PC3 and PC6 package states. 3. KNL has a different encoding of the TURBO_RATIO_LIMIT MSR Signed-off-by: Dasaratharaman Chandramouli Signed-off-by: Len Brown --- arch/x86/include/uapi/asm/msr-index.h | 1 + tools/power/x86/turbostat/turbostat.c | 105 +++++++++++++++++++++++++- 2 files changed, 102 insertions(+), 4 deletions(-) diff --git a/arch/x86/include/uapi/asm/msr-index.h b/arch/x86/include/uapi/asm/msr-index.h index c469490db4a8..3c6bb342a48f 100644 --- a/arch/x86/include/uapi/asm/msr-index.h +++ b/arch/x86/include/uapi/asm/msr-index.h @@ -140,6 +140,7 @@ #define MSR_CORE_C3_RESIDENCY 0x000003fc #define MSR_CORE_C6_RESIDENCY 0x000003fd #define MSR_CORE_C7_RESIDENCY 0x000003fe +#define MSR_KNL_CORE_C6_RESIDENCY 0x000003ff #define MSR_PKG_C2_RESIDENCY 0x0000060d #define MSR_PKG_C8_RESIDENCY 0x00000630 #define MSR_PKG_C9_RESIDENCY 0x00000631 diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index d85adbafbe60..256a5e1de381 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -52,6 +52,7 @@ unsigned int skip_c0; unsigned int skip_c1; unsigned int do_nhm_cstates; unsigned int do_snb_cstates; +unsigned int do_knl_cstates; unsigned int do_pc2; unsigned int do_pc3; unsigned int do_pc6; @@ -316,7 +317,7 @@ void print_header(void) if (do_nhm_cstates) outp += sprintf(outp, " CPU%%c1"); - if (do_nhm_cstates && !do_slm_cstates) + if (do_nhm_cstates && !do_slm_cstates && !do_knl_cstates) outp += sprintf(outp, " CPU%%c3"); if (do_nhm_cstates) outp += sprintf(outp, " CPU%%c6"); @@ -546,7 +547,7 @@ int format_counters(struct thread_data *t, struct core_data *c, if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE)) goto done; - if (do_nhm_cstates && !do_slm_cstates) + if (do_nhm_cstates && !do_slm_cstates && !do_knl_cstates) outp += sprintf(outp, "%8.2f", 100.0 * c->c3/t->tsc); if (do_nhm_cstates) outp += sprintf(outp, "%8.2f", 100.0 * c->c6/t->tsc); @@ -1018,14 +1019,17 @@ int get_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p) if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE)) return 0; - if (do_nhm_cstates && !do_slm_cstates) { + if (do_nhm_cstates && !do_slm_cstates && !do_knl_cstates) { if (get_msr(cpu, MSR_CORE_C3_RESIDENCY, &c->c3)) return -6; } - if (do_nhm_cstates) { + if (do_nhm_cstates && !do_knl_cstates) { if (get_msr(cpu, MSR_CORE_C6_RESIDENCY, &c->c6)) return -7; + } else if (do_knl_cstates) { + if (get_msr(cpu, MSR_KNL_CORE_C6_RESIDENCY, &c->c6)) + return -7; } if (do_snb_cstates) @@ -1295,6 +1299,67 @@ dump_nhm_turbo_ratio_limits(void) return; } +static void +dump_knl_turbo_ratio_limits(void) +{ + int cores; + unsigned int ratio; + unsigned long long msr; + int delta_cores; + int delta_ratio; + int i; + + get_msr(0, MSR_NHM_TURBO_RATIO_LIMIT, &msr); + + fprintf(stderr, "cpu0: MSR_NHM_TURBO_RATIO_LIMIT: 0x%08llx\n", + msr); + + /** + * Turbo encoding in KNL is as follows: + * [7:0] -- Base value of number of active cores of bucket 1. + * [15:8] -- Base value of freq ratio of bucket 1. + * [20:16] -- +ve delta of number of active cores of bucket 2. + * i.e. active cores of bucket 2 = + * active cores of bucket 1 + delta + * [23:21] -- Negative delta of freq ratio of bucket 2. + * i.e. freq ratio of bucket 2 = + * freq ratio of bucket 1 - delta + * [28:24]-- +ve delta of number of active cores of bucket 3. + * [31:29]-- -ve delta of freq ratio of bucket 3. + * [36:32]-- +ve delta of number of active cores of bucket 4. + * [39:37]-- -ve delta of freq ratio of bucket 4. + * [44:40]-- +ve delta of number of active cores of bucket 5. + * [47:45]-- -ve delta of freq ratio of bucket 5. + * [52:48]-- +ve delta of number of active cores of bucket 6. + * [55:53]-- -ve delta of freq ratio of bucket 6. + * [60:56]-- +ve delta of number of active cores of bucket 7. + * [63:61]-- -ve delta of freq ratio of bucket 7. + */ + cores = msr & 0xFF; + ratio = (msr >> 8) && 0xFF; + if (ratio > 0) + fprintf(stderr, + "%d * %.0f = %.0f MHz max turbo %d active cores\n", + ratio, bclk, ratio * bclk, cores); + + for (i = 16; i < 64; i = i + 8) { + delta_cores = (msr >> i) & 0x1F; + delta_ratio = (msr >> (i + 5)) && 0x7; + if (!delta_cores || !delta_ratio) + return; + cores = cores + delta_cores; + ratio = ratio - delta_ratio; + + /** -ve ratios will make successive ratio calculations + * negative. Hence return instead of carrying on. + */ + if (ratio > 0) + fprintf(stderr, + "%d * %.0f = %.0f MHz max turbo %d active cores\n", + ratio, bclk, ratio * bclk, cores); + } +} + static void dump_nhm_cst_cfg(void) { @@ -1788,6 +1853,21 @@ int has_hsw_turbo_ratio_limit(unsigned int family, unsigned int model) } } +int has_knl_turbo_ratio_limit(unsigned int family, unsigned int model) +{ + if (!genuine_intel) + return 0; + + if (family != 6) + return 0; + + switch (model) { + case 0x57: /* Knights Landing */ + return 1; + default: + return 0; + } +} static void dump_cstate_pstate_config_info(family, model) { @@ -1805,6 +1885,9 @@ dump_cstate_pstate_config_info(family, model) if (has_nhm_turbo_ratio_limit(family, model)) dump_nhm_turbo_ratio_limits(); + if (has_knl_turbo_ratio_limit(family, model)) + dump_knl_turbo_ratio_limits(); + dump_nhm_cst_cfg(); } @@ -1985,6 +2068,7 @@ rapl_dram_energy_units_probe(int model, double rapl_energy_units) case 0x3F: /* HSX */ case 0x4F: /* BDX */ case 0x56: /* BDX-DE */ + case 0x57: /* KNL */ return (rapl_dram_energy_units = 15.3 / 1000000); default: return (rapl_energy_units); @@ -2026,6 +2110,7 @@ void rapl_probe(unsigned int family, unsigned int model) case 0x3F: /* HSX */ case 0x4F: /* BDX */ case 0x56: /* BDX-DE */ + case 0x57: /* KNL */ do_rapl = RAPL_PKG | RAPL_DRAM | RAPL_DRAM_POWER_INFO | RAPL_DRAM_PERF_STATUS | RAPL_PKG_PERF_STATUS | RAPL_PKG_POWER_INFO; break; case 0x2D: @@ -2366,6 +2451,17 @@ int is_slm(unsigned int family, unsigned int model) return 0; } +int is_knl(unsigned int family, unsigned int model) +{ + if (!genuine_intel) + return 0; + switch (model) { + case 0x57: /* KNL */ + return 1; + } + return 0; +} + #define SLM_BCLK_FREQS 5 double slm_freq_table[SLM_BCLK_FREQS] = { 83.3, 100.0, 133.3, 116.7, 80.0}; @@ -2576,6 +2672,7 @@ void process_cpuid() do_c8_c9_c10 = has_hsw_msrs(family, model); do_skl_residency = has_skl_msrs(family, model); do_slm_cstates = is_slm(family, model); + do_knl_cstates = is_knl(family, model); bclk = discover_bclk(family, model); rapl_probe(family, model); From e9be7dd62899194ebdd90d417fc6c07d5d157912 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 26 May 2015 12:19:37 -0400 Subject: [PATCH 280/337] tools/power turbostat: correctly decode of ENERGY_PERFORMANCE_BIAS When EPB is 0xF, turbosat was incorrectly describing it as "custom" instead of calling it "powersave": < cpu0: MSR_IA32_ENERGY_PERF_BIAS: 0x0000000f (custom) > cpu0: MSR_IA32_ENERGY_PERF_BIAS: 0x0000000f (powersave) Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 256a5e1de381..f92211e9e70c 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -1919,7 +1919,7 @@ int print_epb(struct thread_data *t, struct core_data *c, struct pkg_data *p) if (get_msr(cpu, MSR_IA32_ENERGY_PERF_BIAS, &msr)) return 0; - switch (msr & 0x7) { + switch (msr & 0xF) { case ENERGY_PERF_BIAS_PERFORMANCE: epb_string = "performance"; break; From 7ce7d5de6dd08ee2a713ef13f4499073b4a72b7f Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Mon, 25 May 2015 08:34:28 -0400 Subject: [PATCH 281/337] tools/power turbostat: allow running without cpu0 Linux-3.7 added CONFIG_BOOTPARAM_HOTPLUG_CPU0, allowing systems to offline cpu0. But when cpu0 is offline, turbostat will not run: # turbostat ls turbostat: no /dev/cpu/0/msr This patch replaces the hard-coded use of cpu0 in turbostat with the current cpu, allowing it to run without a cpu0. Fewer cross-calls may also be needed due to use of current cpu, though this hard-coding was used only for the --debug preamble. Signed-off-by: Prarit Bhargava Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 46 ++++++++++++++++++--------- 1 file changed, 31 insertions(+), 15 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index f92211e9e70c..68e77fdd4c04 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -92,6 +92,7 @@ unsigned int do_gfx_perf_limit_reasons; unsigned int do_ring_perf_limit_reasons; unsigned int crystal_hz; unsigned long long tsc_hz; +int base_cpu; #define RAPL_PKG (1 << 0) /* 0x610 MSR_PKG_POWER_LIMIT */ @@ -1154,7 +1155,7 @@ dump_nhm_platform_info(void) unsigned long long msr; unsigned int ratio; - get_msr(0, MSR_NHM_PLATFORM_INFO, &msr); + get_msr(base_cpu, MSR_NHM_PLATFORM_INFO, &msr); fprintf(stderr, "cpu0: MSR_NHM_PLATFORM_INFO: 0x%08llx\n", msr); @@ -1166,7 +1167,7 @@ dump_nhm_platform_info(void) fprintf(stderr, "%d * %.0f = %.0f MHz base frequency\n", ratio, bclk, ratio * bclk); - get_msr(0, MSR_IA32_POWER_CTL, &msr); + get_msr(base_cpu, MSR_IA32_POWER_CTL, &msr); fprintf(stderr, "cpu0: MSR_IA32_POWER_CTL: 0x%08llx (C1E auto-promotion: %sabled)\n", msr, msr & 0x2 ? "EN" : "DIS"); @@ -1179,7 +1180,7 @@ dump_hsw_turbo_ratio_limits(void) unsigned long long msr; unsigned int ratio; - get_msr(0, MSR_TURBO_RATIO_LIMIT2, &msr); + get_msr(base_cpu, MSR_TURBO_RATIO_LIMIT2, &msr); fprintf(stderr, "cpu0: MSR_TURBO_RATIO_LIMIT2: 0x%08llx\n", msr); @@ -1201,7 +1202,7 @@ dump_ivt_turbo_ratio_limits(void) unsigned long long msr; unsigned int ratio; - get_msr(0, MSR_TURBO_RATIO_LIMIT1, &msr); + get_msr(base_cpu, MSR_TURBO_RATIO_LIMIT1, &msr); fprintf(stderr, "cpu0: MSR_TURBO_RATIO_LIMIT1: 0x%08llx\n", msr); @@ -1253,7 +1254,7 @@ dump_nhm_turbo_ratio_limits(void) unsigned long long msr; unsigned int ratio; - get_msr(0, MSR_TURBO_RATIO_LIMIT, &msr); + get_msr(base_cpu, MSR_TURBO_RATIO_LIMIT, &msr); fprintf(stderr, "cpu0: MSR_TURBO_RATIO_LIMIT: 0x%08llx\n", msr); @@ -1309,7 +1310,7 @@ dump_knl_turbo_ratio_limits(void) int delta_ratio; int i; - get_msr(0, MSR_NHM_TURBO_RATIO_LIMIT, &msr); + get_msr(base_cpu, MSR_NHM_TURBO_RATIO_LIMIT, &msr); fprintf(stderr, "cpu0: MSR_NHM_TURBO_RATIO_LIMIT: 0x%08llx\n", msr); @@ -1365,7 +1366,7 @@ dump_nhm_cst_cfg(void) { unsigned long long msr; - get_msr(0, MSR_NHM_SNB_PKG_CST_CFG_CTL, &msr); + get_msr(base_cpu, MSR_NHM_SNB_PKG_CST_CFG_CTL, &msr); #define SNB_C1_AUTO_UNDEMOTE (1UL << 27) #define SNB_C3_AUTO_UNDEMOTE (1UL << 28) @@ -1694,8 +1695,10 @@ restart: void check_dev_msr() { struct stat sb; + char pathname[32]; - if (stat("/dev/cpu/0/msr", &sb)) + sprintf(pathname, "/dev/cpu/%d/msr", base_cpu); + if (stat(pathname, &sb)) if (system("/sbin/modprobe msr > /dev/null 2>&1")) err(-5, "no /dev/cpu/0/msr, Try \"# modprobe msr\" "); } @@ -1708,6 +1711,7 @@ void check_permissions() cap_user_data_t cap_data = &cap_data_data; extern int capget(cap_user_header_t hdrp, cap_user_data_t datap); int do_exit = 0; + char pathname[32]; /* check for CAP_SYS_RAWIO */ cap_header->pid = getpid(); @@ -1722,7 +1726,8 @@ void check_permissions() } /* test file permissions */ - if (euidaccess("/dev/cpu/0/msr", R_OK)) { + sprintf(pathname, "/dev/cpu/%d/msr", base_cpu); + if (euidaccess(pathname, R_OK)) { do_exit++; warn("/dev/cpu/0/msr open failed, try chown or chmod +r /dev/cpu/*/msr"); } @@ -1804,7 +1809,7 @@ int probe_nhm_msrs(unsigned int family, unsigned int model) default: return 0; } - get_msr(0, MSR_NHM_SNB_PKG_CST_CFG_CTL, &msr); + get_msr(base_cpu, MSR_NHM_SNB_PKG_CST_CFG_CTL, &msr); pkg_cstate_limit = pkg_cstate_limits[msr & 0xF]; @@ -2043,7 +2048,7 @@ double get_tdp(model) unsigned long long msr; if (do_rapl & RAPL_PKG_POWER_INFO) - if (!get_msr(0, MSR_PKG_POWER_INFO, &msr)) + if (!get_msr(base_cpu, MSR_PKG_POWER_INFO, &msr)) return ((msr >> 0) & RAPL_POWER_GRANULARITY) * rapl_power_units; switch (model) { @@ -2126,7 +2131,7 @@ void rapl_probe(unsigned int family, unsigned int model) } /* units on package 0, verify later other packages match */ - if (get_msr(0, MSR_RAPL_POWER_UNIT, &msr)) + if (get_msr(base_cpu, MSR_RAPL_POWER_UNIT, &msr)) return; rapl_power_units = 1.0 / (1 << (msr & 0xF)); @@ -2471,7 +2476,7 @@ double slm_bclk(void) unsigned int i; double freq; - if (get_msr(0, MSR_FSB_FREQ, &msr)) + if (get_msr(base_cpu, MSR_FSB_FREQ, &msr)) fprintf(stderr, "SLM BCLK: unknown\n"); i = msr & 0xf; @@ -2539,7 +2544,7 @@ int set_temperature_target(struct thread_data *t, struct core_data *c, struct pk if (!do_nhm_platform_info) goto guess; - if (get_msr(0, MSR_IA32_TEMPERATURE_TARGET, &msr)) + if (get_msr(base_cpu, MSR_IA32_TEMPERATURE_TARGET, &msr)) goto guess; target_c_local = (msr >> 16) & 0xFF; @@ -2913,13 +2918,24 @@ void setup_all_buffers(void) for_all_proc_cpus(initialize_counters); } +void set_base_cpu(void) +{ + base_cpu = sched_getcpu(); + if (base_cpu < 0) + err(-ENODEV, "No valid cpus found"); + + if (debug > 1) + fprintf(stderr, "base_cpu = %d\n", base_cpu); +} + void turbostat_init() { + setup_all_buffers(); + set_base_cpu(); check_dev_msr(); check_permissions(); process_cpuid(); - setup_all_buffers(); if (debug) for_all_cpus(print_epb, ODD_COUNTERS); From a68c7c3ff0469d79993ee85e8e0a3a9a568ce350 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 27 May 2015 18:00:39 -0400 Subject: [PATCH 282/337] tools/power turbostat: update version number to 4.7 Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 68e77fdd4c04..323b65edfc97 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -3014,7 +3014,7 @@ int get_and_dump_counters(void) } void print_version() { - fprintf(stderr, "turbostat version 4.5 2 Apr, 2015" + fprintf(stderr, "turbostat version 4.7 27-May, 2015" " - Len Brown \n"); } From dc4fdaf0e4839109169d8261814813816951c75f Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 28 May 2015 01:39:53 +0200 Subject: [PATCH 283/337] PCI / ACPI: Do not set ACPI companions for host bridges with parents Commit 97badf873ab6 (device property: Make it possible to use secondary firmware nodes) uncovered a bug in the x86 (and ia64) PCI host bridge initialization code that assumes bridge->bus->sysdata to always point to a struct pci_sysdata object which need not be the case (in particular, the Xen PCI frontend driver sets it to point to a different data type). If it is not the case, an incorrect pointer (or a piece of data that is not a pointer at all) will be passed to ACPI_COMPANION_SET() and that may cause interesting breakage to happen going forward. To work around this problem use the observation that the ACPI host bridge initialization always passes NULL as parent to pci_create_root_bus(), so if pcibios_root_bridge_prepare() sees a non-NULL parent of the bridge, it should not attempt to set an ACPI companion for it, because that means that pci_create_root_bus() has been called by someone else. Fixes: 97badf873ab6 (device property: Make it possible to use secondary firmware nodes) Reported-and-tested-by: Sander Eikelenboom Signed-off-by: Rafael J. Wysocki Acked-by: Bjorn Helgaas --- arch/ia64/pci/pci.c | 13 ++++++++++--- arch/x86/pci/acpi.c | 13 ++++++++++--- 2 files changed, 20 insertions(+), 6 deletions(-) diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index d4e162d35b34..7cc3be9fa7c6 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -478,9 +478,16 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root) int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge) { - struct pci_controller *controller = bridge->bus->sysdata; - - ACPI_COMPANION_SET(&bridge->dev, controller->companion); + /* + * We pass NULL as parent to pci_create_root_bus(), so if it is not NULL + * here, pci_create_root_bus() has been called by someone else and + * sysdata is likely to be different from what we expect. Let it go in + * that case. + */ + if (!bridge->dev.parent) { + struct pci_controller *controller = bridge->bus->sysdata; + ACPI_COMPANION_SET(&bridge->dev, controller->companion); + } return 0; } diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index d93963340c3c..14a63ed6fe09 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -482,9 +482,16 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root) int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge) { - struct pci_sysdata *sd = bridge->bus->sysdata; - - ACPI_COMPANION_SET(&bridge->dev, sd->companion); + /* + * We pass NULL as parent to pci_create_root_bus(), so if it is not NULL + * here, pci_create_root_bus() has been called by someone else and + * sysdata is likely to be different from what we expect. Let it go in + * that case. + */ + if (!bridge->dev.parent) { + struct pci_sysdata *sd = bridge->bus->sysdata; + ACPI_COMPANION_SET(&bridge->dev, sd->companion); + } return 0; } From 2b6b24574256c05be145936f1493aec74c6904e5 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 21 May 2015 15:10:01 +1000 Subject: [PATCH 284/337] md/raid5: ensure whole batch is delayed for all required bitmap updates. When we add a stripe to a batch, we need to be sure that head stripe will wait for the bitmap update required for the new stripe. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index b9f2b9cc6060..c55a68f37c72 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -837,6 +837,15 @@ static void stripe_add_to_batch_list(struct r5conf *conf, struct stripe_head *sh < IO_THRESHOLD) md_wakeup_thread(conf->mddev->thread); + if (test_and_clear_bit(STRIPE_BIT_DELAY, &sh->state)) { + int seq = sh->bm_seq; + if (test_bit(STRIPE_BIT_DELAY, &sh->batch_head->state) && + sh->batch_head->bm_seq > seq) + seq = sh->batch_head->bm_seq; + set_bit(STRIPE_BIT_DELAY, &sh->batch_head->state); + sh->batch_head->bm_seq = seq; + } + atomic_inc(&sh->count); unlock_out: unlock_two_stripes(head, sh); From d0852df543e5aa7db34c1ad26d053782bcbf48f1 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 27 May 2015 08:43:45 +1000 Subject: [PATCH 285/337] md/raid5: close race between STRIPE_BIT_DELAY and batching. When we add a write to a stripe we need to make sure the bitmap bit is set. While doing that the stripe is not locked so it could be added to a batch after which further changes to STRIPE_BIT_DELAY and ->bm_seq are ineffective. So we need to hold off adding to a stripe until bitmap_startwrite has completed at least once, and we need to avoid further changes to STRIPE_BIT_DELAY once the stripe has been added to a batch. If a bitmap_startwrite() completes after the stripe was added to a batch, it will not have set the bit, only incremented a counter, so no extra delay of the stripe is needed. Reported-by: Shaohua Li Signed-off-by: NeilBrown --- drivers/md/raid5.c | 25 ++++++++++++++++++++++--- drivers/md/raid5.h | 3 +++ 2 files changed, 25 insertions(+), 3 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index c55a68f37c72..42d0ea6c8597 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -749,6 +749,7 @@ static void unlock_two_stripes(struct stripe_head *sh1, struct stripe_head *sh2) static bool stripe_can_batch(struct stripe_head *sh) { return test_bit(STRIPE_BATCH_READY, &sh->state) && + !test_bit(STRIPE_BITMAP_PENDING, &sh->state) && is_full_stripe_write(sh); } @@ -2996,14 +2997,32 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, pr_debug("added bi b#%llu to stripe s#%llu, disk %d.\n", (unsigned long long)(*bip)->bi_iter.bi_sector, (unsigned long long)sh->sector, dd_idx); - spin_unlock_irq(&sh->stripe_lock); if (conf->mddev->bitmap && firstwrite) { + /* Cannot hold spinlock over bitmap_startwrite, + * but must ensure this isn't added to a batch until + * we have added to the bitmap and set bm_seq. + * So set STRIPE_BITMAP_PENDING to prevent + * batching. + * If multiple add_stripe_bio() calls race here they + * much all set STRIPE_BITMAP_PENDING. So only the first one + * to complete "bitmap_startwrite" gets to set + * STRIPE_BIT_DELAY. This is important as once a stripe + * is added to a batch, STRIPE_BIT_DELAY cannot be changed + * any more. + */ + set_bit(STRIPE_BITMAP_PENDING, &sh->state); + spin_unlock_irq(&sh->stripe_lock); bitmap_startwrite(conf->mddev->bitmap, sh->sector, STRIPE_SECTORS, 0); - sh->bm_seq = conf->seq_flush+1; - set_bit(STRIPE_BIT_DELAY, &sh->state); + spin_lock_irq(&sh->stripe_lock); + clear_bit(STRIPE_BITMAP_PENDING, &sh->state); + if (!sh->batch_head) { + sh->bm_seq = conf->seq_flush+1; + set_bit(STRIPE_BIT_DELAY, &sh->state); + } } + spin_unlock_irq(&sh->stripe_lock); if (stripe_can_batch(sh)) stripe_add_to_batch_list(conf, sh); diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h index 7dc0dd86074b..01cdb9f3a0c4 100644 --- a/drivers/md/raid5.h +++ b/drivers/md/raid5.h @@ -337,6 +337,9 @@ enum { STRIPE_ON_RELEASE_LIST, STRIPE_BATCH_READY, STRIPE_BATCH_ERR, + STRIPE_BITMAP_PENDING, /* Being added to bitmap, don't add + * to batch yet. + */ }; #define STRIPE_EXPAND_SYNC_FLAG \ From f36963c9d3f6f415732710da3acdd8608a9fa0e5 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Sat, 9 May 2015 03:14:13 +0930 Subject: [PATCH 286/337] cpumask_set_cpu_local_first => cpumask_local_spread, lament da91309e0a7e (cpumask: Utility function to set n'th cpu...) created a genuinely weird function. I never saw it before, it went through DaveM. (He only does this to make us other maintainers feel better about our own mistakes.) cpumask_set_cpu_local_first's purpose is say "I need to spread things across N online cpus, choose the ones on this numa node first"; you call it in a loop. It can fail. One of the two callers ignores this, the other aborts and fails the device open. It can fail in two ways: allocating the off-stack cpumask, or through a convoluted codepath which AFAICT can only occur if cpu_online_mask changes. Which shouldn't happen, because if cpu_online_mask can change while you call this, it could return a now-offline cpu anyway. It contains a nonsensical test "!cpumask_of_node(numa_node)". This was drawn to my attention by Geert, who said this causes a warning on Sparc. It sets a single bit in a cpumask instead of returning a cpu number, because that's what the callers want. It could be made more efficient by passing the previous cpu rather than an index, but that would be more invasive to the callers. Fixes: da91309e0a7e8966d916a74cce42ed170fde06bf Signed-off-by: Rusty Russell (then rebased) Tested-by: Amir Vadai Acked-by: Amir Vadai Acked-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 6 +- .../net/ethernet/mellanox/mlx4/en_netdev.c | 10 +-- drivers/net/ethernet/mellanox/mlx4/en_tx.c | 6 +- include/linux/cpumask.h | 6 +- lib/cpumask.c | 70 +++++++------------ 5 files changed, 35 insertions(+), 63 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index a6dcbf850c1f..6f9ffb9026cd 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2358,11 +2358,11 @@ static int be_evt_queues_create(struct be_adapter *adapter) adapter->cfg_num_qs); for_all_evt_queues(adapter, eqo, i) { + int numa_node = dev_to_node(&adapter->pdev->dev); if (!zalloc_cpumask_var(&eqo->affinity_mask, GFP_KERNEL)) return -ENOMEM; - cpumask_set_cpu_local_first(i, dev_to_node(&adapter->pdev->dev), - eqo->affinity_mask); - + cpumask_set_cpu(cpumask_local_spread(i, numa_node), + eqo->affinity_mask); netif_napi_add(adapter->netdev, &eqo->napi, be_poll, BE_NAPI_WEIGHT); napi_hash_add(&eqo->napi); diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 32f5ec737472..cf467a9f6cc7 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1501,17 +1501,13 @@ static int mlx4_en_init_affinity_hint(struct mlx4_en_priv *priv, int ring_idx) { struct mlx4_en_rx_ring *ring = priv->rx_ring[ring_idx]; int numa_node = priv->mdev->dev->numa_node; - int ret = 0; if (!zalloc_cpumask_var(&ring->affinity_mask, GFP_KERNEL)) return -ENOMEM; - ret = cpumask_set_cpu_local_first(ring_idx, numa_node, - ring->affinity_mask); - if (ret) - free_cpumask_var(ring->affinity_mask); - - return ret; + cpumask_set_cpu(cpumask_local_spread(ring_idx, numa_node), + ring->affinity_mask); + return 0; } static void mlx4_en_free_affinity_hint(struct mlx4_en_priv *priv, int ring_idx) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index f7bf312fb443..7bed3a88579f 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -144,9 +144,9 @@ int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv, ring->queue_index = queue_index; if (queue_index < priv->num_tx_rings_p_up) - cpumask_set_cpu_local_first(queue_index, - priv->mdev->dev->numa_node, - &ring->affinity_mask); + cpumask_set_cpu(cpumask_local_spread(queue_index, + priv->mdev->dev->numa_node), + &ring->affinity_mask); *pring = ring; return 0; diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index 27e285b92b5f..59915ea5373c 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -151,10 +151,8 @@ static inline unsigned int cpumask_any_but(const struct cpumask *mask, return 1; } -static inline int cpumask_set_cpu_local_first(int i, int numa_node, cpumask_t *dstp) +static inline unsigned int cpumask_local_spread(unsigned int i, int node) { - set_bit(0, cpumask_bits(dstp)); - return 0; } @@ -208,7 +206,7 @@ static inline unsigned int cpumask_next_zero(int n, const struct cpumask *srcp) int cpumask_next_and(int n, const struct cpumask *, const struct cpumask *); int cpumask_any_but(const struct cpumask *mask, unsigned int cpu); -int cpumask_set_cpu_local_first(int i, int numa_node, cpumask_t *dstp); +unsigned int cpumask_local_spread(unsigned int i, int node); /** * for_each_cpu - iterate over every cpu in a mask diff --git a/lib/cpumask.c b/lib/cpumask.c index 830dd5dec40f..5f627084f2e9 100644 --- a/lib/cpumask.c +++ b/lib/cpumask.c @@ -139,64 +139,42 @@ void __init free_bootmem_cpumask_var(cpumask_var_t mask) #endif /** - * cpumask_set_cpu_local_first - set i'th cpu with local numa cpu's first - * + * cpumask_local_spread - select the i'th cpu with local numa cpu's first * @i: index number - * @numa_node: local numa_node - * @dstp: cpumask with the relevant cpu bit set according to the policy + * @node: local numa_node * - * This function sets the cpumask according to a numa aware policy. - * cpumask could be used as an affinity hint for the IRQ related to a - * queue. When the policy is to spread queues across cores - local cores - * first. + * This function selects an online CPU according to a numa aware policy; + * local cpus are returned first, followed by non-local ones, then it + * wraps around. * - * Returns 0 on success, -ENOMEM for no memory, and -EAGAIN when failed to set - * the cpu bit and need to re-call the function. + * It's not very efficient, but useful for setup. */ -int cpumask_set_cpu_local_first(int i, int numa_node, cpumask_t *dstp) +unsigned int cpumask_local_spread(unsigned int i, int node) { - cpumask_var_t mask; int cpu; - int ret = 0; - - if (!zalloc_cpumask_var(&mask, GFP_KERNEL)) - return -ENOMEM; + /* Wrap: we always want a cpu. */ i %= num_online_cpus(); - if (numa_node == -1 || !cpumask_of_node(numa_node)) { - /* Use all online cpu's for non numa aware system */ - cpumask_copy(mask, cpu_online_mask); + if (node == -1) { + for_each_cpu(cpu, cpu_online_mask) + if (i-- == 0) + return cpu; } else { - int n; + /* NUMA first. */ + for_each_cpu_and(cpu, cpumask_of_node(node), cpu_online_mask) + if (i-- == 0) + return cpu; - cpumask_and(mask, - cpumask_of_node(numa_node), cpu_online_mask); + for_each_cpu(cpu, cpu_online_mask) { + /* Skip NUMA nodes, done above. */ + if (cpumask_test_cpu(cpu, cpumask_of_node(node))) + continue; - n = cpumask_weight(mask); - if (i >= n) { - i -= n; - - /* If index > number of local cpu's, mask out local - * cpu's - */ - cpumask_andnot(mask, cpu_online_mask, mask); + if (i-- == 0) + return cpu; } } - - for_each_cpu(cpu, mask) { - if (--i < 0) - goto out; - } - - ret = -EAGAIN; - -out: - free_cpumask_var(mask); - - if (!ret) - cpumask_set_cpu(cpu, dstp); - - return ret; + BUG(); } -EXPORT_SYMBOL(cpumask_set_cpu_local_first); +EXPORT_SYMBOL(cpumask_local_spread); From b15a9dbdbfe72848b7ed4cd3f97fe80daaf99c89 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 22 May 2015 15:20:04 +1000 Subject: [PATCH 287/337] md/raid5: Ensure a batch member is not handled prematurely. If a stripe is a member of a batch, but not the head, it must not be handled separately from the rest of the batch. 'clear_batch_ready()' handles this requirement to some extent but not completely. If a member is passed to handle_stripe() a second time it returns '0' indicating the stripe can be handled, which is wrong. So add an extra test. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 42d0ea6c8597..e58736740bac 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -4200,9 +4200,13 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s) static int clear_batch_ready(struct stripe_head *sh) { + /* Return '1' if this is a member of batch, or + * '0' if it is a lone stripe or a head which can now be + * handled. + */ struct stripe_head *tmp; if (!test_and_clear_bit(STRIPE_BATCH_READY, &sh->state)) - return 0; + return (sh->batch_head && sh->batch_head != sh); spin_lock(&sh->stripe_lock); if (!sh->batch_head) { spin_unlock(&sh->stripe_lock); From 4e3d62ff4976f26d22b8b91572a49136bb3a23f1 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 21 May 2015 11:50:16 +1000 Subject: [PATCH 288/337] md/raid5: remove condition test from check_break_stripe_batch_list. handle_stripe_clean_event() contains a chunk of code very similar to check_break_stripe_batch_list(). If we make the latter more like the former, we can end up with just one copy of this code. This first step removed the condition (and the 'check_') part of the name. This has the added advantage of making it clear what check is being performed at the point where the function is called. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index e58736740bac..fc5c4039c394 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -4234,16 +4234,11 @@ static int clear_batch_ready(struct stripe_head *sh) return 0; } -static void check_break_stripe_batch_list(struct stripe_head *sh) +static void break_stripe_batch_list(struct stripe_head *head_sh) { - struct stripe_head *head_sh, *next; + struct stripe_head *sh, *next; int i; - if (!test_and_clear_bit(STRIPE_BATCH_ERR, &sh->state)) - return; - - head_sh = sh; - list_for_each_entry_safe(sh, next, &head_sh->batch_list, batch_list) { list_del_init(&sh->batch_list); @@ -4290,7 +4285,8 @@ static void handle_stripe(struct stripe_head *sh) return; } - check_break_stripe_batch_list(sh); + if (test_and_clear_bit(STRIPE_BATCH_ERR, &sh->state)) + break_stripe_batch_list(sh); if (test_bit(STRIPE_SYNC_REQUESTED, &sh->state) && !sh->batch_head) { spin_lock(&sh->stripe_lock); From fb642b92c267beeefd352af9bc461eac93a7552c Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 21 May 2015 12:00:47 +1000 Subject: [PATCH 289/337] md/raid5: duplicate some more handle_stripe_clean_event code in break_stripe_batch_list break_stripe_batch list didn't clear head_sh->batch_head. This was probably a bug. Also clear all R5_Overlap flags and if any were cleared, wake up 'wait_for_overlap'. This isn't always necessary but the worst effect is a little extra checking for code that is waiting on wait_for_overlap. Also, don't use wake_up_nr() because that does the wrong thing if 'nr' is zero, and it number of flags cleared doesn't strongly correlate with the number of threads to wake. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index fc5c4039c394..6de2e1edd492 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3557,7 +3557,8 @@ unhash: spin_lock_irq(&head_sh->stripe_lock); head_sh->batch_head = NULL; spin_unlock_irq(&head_sh->stripe_lock); - wake_up_nr(&conf->wait_for_overlap, wakeup_nr); + if (wakeup_nr) + wake_up(&conf->wait_for_overlap); if (head_sh->state & STRIPE_EXPAND_SYNC_FLAG) set_bit(STRIPE_HANDLE, &head_sh->state); } @@ -4238,6 +4239,7 @@ static void break_stripe_batch_list(struct stripe_head *head_sh) { struct stripe_head *sh, *next; int i; + int do_wakeup = 0; list_for_each_entry_safe(sh, next, &head_sh->batch_list, batch_list) { @@ -4250,10 +4252,12 @@ static void break_stripe_batch_list(struct stripe_head *head_sh) STRIPE_EXPAND_SYNC_FLAG)); sh->check_state = head_sh->check_state; sh->reconstruct_state = head_sh->reconstruct_state; - for (i = 0; i < sh->disks; i++) + for (i = 0; i < sh->disks; i++) { + if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags)) + do_wakeup = 1; sh->dev[i].flags = head_sh->dev[i].flags & (~((1 << R5_WriteError) | (1 << R5_Overlap))); - + } spin_lock_irq(&sh->stripe_lock); sh->batch_head = NULL; spin_unlock_irq(&sh->stripe_lock); @@ -4261,6 +4265,15 @@ static void break_stripe_batch_list(struct stripe_head *head_sh) set_bit(STRIPE_HANDLE, &sh->state); release_stripe(sh); } + spin_lock_irq(&head_sh->stripe_lock); + head_sh->batch_head = NULL; + spin_unlock_irq(&head_sh->stripe_lock); + for (i = 0; i < head_sh->disks; i++) + if (test_and_clear_bit(R5_Overlap, &head_sh->dev[i].flags)) + do_wakeup = 1; + + if (do_wakeup) + wake_up(&head_sh->raid_conf->wait_for_overlap); } static void handle_stripe(struct stripe_head *sh) From 3960ce796198254b7a1b420dc9a26d80928523bd Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 21 May 2015 12:20:36 +1000 Subject: [PATCH 290/337] md/raid5: add handle_flags arg to break_stripe_batch_list. When we break a stripe_batch_list we sometimes want to set STRIPE_HANDLE on the individual stripes, and sometimes not. So pass a 'handle_flags' arg. If it is zero, always set STRIPE_HANDLE (on non-head stripes). If not zero, only set it if any of the given flags are present. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 6de2e1edd492..0b65eb51e562 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -4235,7 +4235,8 @@ static int clear_batch_ready(struct stripe_head *sh) return 0; } -static void break_stripe_batch_list(struct stripe_head *head_sh) +static void break_stripe_batch_list(struct stripe_head *head_sh, + unsigned long handle_flags) { struct stripe_head *sh, *next; int i; @@ -4261,8 +4262,9 @@ static void break_stripe_batch_list(struct stripe_head *head_sh) spin_lock_irq(&sh->stripe_lock); sh->batch_head = NULL; spin_unlock_irq(&sh->stripe_lock); - - set_bit(STRIPE_HANDLE, &sh->state); + if (handle_flags == 0 || + sh->state & handle_flags) + set_bit(STRIPE_HANDLE, &sh->state); release_stripe(sh); } spin_lock_irq(&head_sh->stripe_lock); @@ -4271,6 +4273,8 @@ static void break_stripe_batch_list(struct stripe_head *head_sh) for (i = 0; i < head_sh->disks; i++) if (test_and_clear_bit(R5_Overlap, &head_sh->dev[i].flags)) do_wakeup = 1; + if (head_sh->state & handle_flags) + set_bit(STRIPE_HANDLE, &head_sh->state); if (do_wakeup) wake_up(&head_sh->raid_conf->wait_for_overlap); @@ -4299,7 +4303,7 @@ static void handle_stripe(struct stripe_head *sh) } if (test_and_clear_bit(STRIPE_BATCH_ERR, &sh->state)) - break_stripe_batch_list(sh); + break_stripe_batch_list(sh, 0); if (test_bit(STRIPE_SYNC_REQUESTED, &sh->state) && !sh->batch_head) { spin_lock(&sh->stripe_lock); From 1b956f7a8f9aa63ea9644ab8c3374cf381993363 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 21 May 2015 12:40:26 +1000 Subject: [PATCH 291/337] md/raid5: be more selective about distributing flags across batch. When a batch of stripes is broken up, we keep some of the flags that were per-stripe, and copy other flags from the head to all others. This only happens while a stripe is being handled, so many of the flags are irrelevant. The "SYNC_FLAGS" (which I've renamed to make it clear there are several) and STRIPE_DEGRADED are set per-stripe and so need to be preserved. STRIPE_INSYNC is the only flag that is set on the head that needs to be propagated to all others. For safety, add a WARN_ON if others are set, except: STRIPE_HANDLE - this is safe and per-stripe and we are going to set in several cases anyway STRIPE_INSYNC STRIPE_IO_STARTED - this is just a hint and doesn't hurt. STRIPE_ON_PLUG_LIST STRIPE_ON_RELEASE_LIST - It is a point pointless for a batched stripe to be on one of these lists, but it can happen as can be safely ignored. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 55 ++++++++++++++++++++++++++++++++++++---------- drivers/md/raid5.h | 2 +- 2 files changed, 45 insertions(+), 12 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 0b65eb51e562..1141b7f62e6e 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3534,10 +3534,27 @@ unhash: struct stripe_head, batch_list); list_del_init(&sh->batch_list); - set_mask_bits(&sh->state, ~STRIPE_EXPAND_SYNC_FLAG, - head_sh->state & ~((1 << STRIPE_ACTIVE) | - (1 << STRIPE_PREREAD_ACTIVE) | - STRIPE_EXPAND_SYNC_FLAG)); + WARN_ON_ONCE(sh->state & ((1 << STRIPE_ACTIVE) | + (1 << STRIPE_SYNCING) | + (1 << STRIPE_REPLACED) | + (1 << STRIPE_PREREAD_ACTIVE) | + (1 << STRIPE_DELAYED) | + (1 << STRIPE_BIT_DELAY) | + (1 << STRIPE_FULL_WRITE) | + (1 << STRIPE_BIOFILL_RUN) | + (1 << STRIPE_COMPUTE_RUN) | + (1 << STRIPE_OPS_REQ_PENDING) | + (1 << STRIPE_DISCARD) | + (1 << STRIPE_BATCH_READY) | + (1 << STRIPE_BATCH_ERR) | + (1 << STRIPE_BITMAP_PENDING))); + WARN_ON_ONCE(head_sh->state & ((1 << STRIPE_DISCARD) | + (1 << STRIPE_REPLACED))); + + set_mask_bits(&sh->state, ~(STRIPE_EXPAND_SYNC_FLAGS | + (1 << STRIPE_DEGRADED)), + head_sh->state & (1 << STRIPE_INSYNC)); + sh->check_state = head_sh->check_state; sh->reconstruct_state = head_sh->reconstruct_state; for (i = 0; i < sh->disks; i++) { @@ -3549,7 +3566,7 @@ unhash: spin_lock_irq(&sh->stripe_lock); sh->batch_head = NULL; spin_unlock_irq(&sh->stripe_lock); - if (sh->state & STRIPE_EXPAND_SYNC_FLAG) + if (sh->state & STRIPE_EXPAND_SYNC_FLAGS) set_bit(STRIPE_HANDLE, &sh->state); release_stripe(sh); } @@ -3559,7 +3576,7 @@ unhash: spin_unlock_irq(&head_sh->stripe_lock); if (wakeup_nr) wake_up(&conf->wait_for_overlap); - if (head_sh->state & STRIPE_EXPAND_SYNC_FLAG) + if (head_sh->state & STRIPE_EXPAND_SYNC_FLAGS) set_bit(STRIPE_HANDLE, &head_sh->state); } @@ -4246,11 +4263,27 @@ static void break_stripe_batch_list(struct stripe_head *head_sh, list_del_init(&sh->batch_list); - set_mask_bits(&sh->state, ~STRIPE_EXPAND_SYNC_FLAG, - head_sh->state & ~((1 << STRIPE_ACTIVE) | - (1 << STRIPE_PREREAD_ACTIVE) | - (1 << STRIPE_DEGRADED) | - STRIPE_EXPAND_SYNC_FLAG)); + WARN_ON_ONCE(sh->state & ((1 << STRIPE_ACTIVE) | + (1 << STRIPE_SYNCING) | + (1 << STRIPE_REPLACED) | + (1 << STRIPE_PREREAD_ACTIVE) | + (1 << STRIPE_DELAYED) | + (1 << STRIPE_BIT_DELAY) | + (1 << STRIPE_FULL_WRITE) | + (1 << STRIPE_BIOFILL_RUN) | + (1 << STRIPE_COMPUTE_RUN) | + (1 << STRIPE_OPS_REQ_PENDING) | + (1 << STRIPE_DISCARD) | + (1 << STRIPE_BATCH_READY) | + (1 << STRIPE_BATCH_ERR) | + (1 << STRIPE_BITMAP_PENDING))); + WARN_ON_ONCE(head_sh->state & ((1 << STRIPE_DISCARD) | + (1 << STRIPE_REPLACED))); + + set_mask_bits(&sh->state, ~(STRIPE_EXPAND_SYNC_FLAGS | + (1 << STRIPE_DEGRADED)), + head_sh->state & (1 << STRIPE_INSYNC)); + sh->check_state = head_sh->check_state; sh->reconstruct_state = head_sh->reconstruct_state; for (i = 0; i < sh->disks; i++) { diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h index 01cdb9f3a0c4..896d603ad0da 100644 --- a/drivers/md/raid5.h +++ b/drivers/md/raid5.h @@ -342,7 +342,7 @@ enum { */ }; -#define STRIPE_EXPAND_SYNC_FLAG \ +#define STRIPE_EXPAND_SYNC_FLAGS \ ((1 << STRIPE_EXPAND_SOURCE) |\ (1 << STRIPE_EXPAND_READY) |\ (1 << STRIPE_EXPANDING) |\ From 787b76fa37159050f6d26aebfa6210009baed93b Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 21 May 2015 12:56:41 +1000 Subject: [PATCH 292/337] md/raid5: call break_stripe_batch_list from handle_stripe_clean_event Now that the code in break_stripe_batch_list() is nearly identical to the end of handle_stripe_clean_event, replace the later with a function call. The only remaining difference of any interest is the masking that is applieds to dev[i].flags copied from head_sh. R5_WriteError certainly isn't wanted as it is set per-stripe, not per-patch. R5_Overlap isn't wanted as it is explicitly handled. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 61 +++------------------------------------------- 1 file changed, 4 insertions(+), 57 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 1141b7f62e6e..3254504b1080 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3420,6 +3420,8 @@ static void handle_stripe_fill(struct stripe_head *sh, set_bit(STRIPE_HANDLE, &sh->state); } +static void break_stripe_batch_list(struct stripe_head *head_sh, + unsigned long handle_flags); /* handle_stripe_clean_event * any written block on an uptodate or failed drive can be returned. * Note that if we 'wrote' to a failed drive, it will be UPTODATE, but @@ -3433,7 +3435,6 @@ static void handle_stripe_clean_event(struct r5conf *conf, int discard_pending = 0; struct stripe_head *head_sh = sh; bool do_endio = false; - int wakeup_nr = 0; for (i = disks; i--; ) if (sh->dev[i].written) { @@ -3522,62 +3523,8 @@ unhash: if (atomic_dec_and_test(&conf->pending_full_writes)) md_wakeup_thread(conf->mddev->thread); - if (!head_sh->batch_head || !do_endio) - return; - for (i = 0; i < head_sh->disks; i++) { - if (test_and_clear_bit(R5_Overlap, &head_sh->dev[i].flags)) - wakeup_nr++; - } - while (!list_empty(&head_sh->batch_list)) { - int i; - sh = list_first_entry(&head_sh->batch_list, - struct stripe_head, batch_list); - list_del_init(&sh->batch_list); - - WARN_ON_ONCE(sh->state & ((1 << STRIPE_ACTIVE) | - (1 << STRIPE_SYNCING) | - (1 << STRIPE_REPLACED) | - (1 << STRIPE_PREREAD_ACTIVE) | - (1 << STRIPE_DELAYED) | - (1 << STRIPE_BIT_DELAY) | - (1 << STRIPE_FULL_WRITE) | - (1 << STRIPE_BIOFILL_RUN) | - (1 << STRIPE_COMPUTE_RUN) | - (1 << STRIPE_OPS_REQ_PENDING) | - (1 << STRIPE_DISCARD) | - (1 << STRIPE_BATCH_READY) | - (1 << STRIPE_BATCH_ERR) | - (1 << STRIPE_BITMAP_PENDING))); - WARN_ON_ONCE(head_sh->state & ((1 << STRIPE_DISCARD) | - (1 << STRIPE_REPLACED))); - - set_mask_bits(&sh->state, ~(STRIPE_EXPAND_SYNC_FLAGS | - (1 << STRIPE_DEGRADED)), - head_sh->state & (1 << STRIPE_INSYNC)); - - sh->check_state = head_sh->check_state; - sh->reconstruct_state = head_sh->reconstruct_state; - for (i = 0; i < sh->disks; i++) { - if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags)) - wakeup_nr++; - sh->dev[i].flags = head_sh->dev[i].flags; - } - - spin_lock_irq(&sh->stripe_lock); - sh->batch_head = NULL; - spin_unlock_irq(&sh->stripe_lock); - if (sh->state & STRIPE_EXPAND_SYNC_FLAGS) - set_bit(STRIPE_HANDLE, &sh->state); - release_stripe(sh); - } - - spin_lock_irq(&head_sh->stripe_lock); - head_sh->batch_head = NULL; - spin_unlock_irq(&head_sh->stripe_lock); - if (wakeup_nr) - wake_up(&conf->wait_for_overlap); - if (head_sh->state & STRIPE_EXPAND_SYNC_FLAGS) - set_bit(STRIPE_HANDLE, &head_sh->state); + if (head_sh->batch_head && do_endio) + break_stripe_batch_list(head_sh, STRIPE_EXPAND_SYNC_FLAGS); } static void handle_stripe_dirtying(struct r5conf *conf, From 626f2092c85ac847bb80b3257eb6a565dec32278 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 22 May 2015 14:03:10 +1000 Subject: [PATCH 293/337] md/raid5: break stripe-batches when the array has failed. Once the array has too much failure, we need to break stripe-batches up so they can all be dealt with. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 3254504b1080..553d54b87052 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -4337,6 +4337,7 @@ static void handle_stripe(struct stripe_head *sh) if (s.failed > conf->max_degraded) { sh->check_state = 0; sh->reconstruct_state = 0; + break_stripe_batch_list(sh, 0); if (s.to_read+s.to_write+s.written) handle_failed_stripe(conf, sh, &s, disks, &s.return_bi); if (s.syncing + s.replacing) From 56ccc1125bc141cf63927eda7febff4216dea2d3 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 28 May 2015 17:53:29 +1000 Subject: [PATCH 294/337] md: fix race when unfreezing sync_action A recent change removed the need for locking around writing to "sync_action" (and various other places), but introduced a subtle race. When e.g. setting 'reshape' on a 'frozen' array, the 'frozen' flag is cleared before 'reshape' is set, so the md thread can get in and start trying recovery - which isn't wanted. So instead of clearing MD_RECOVERY_FROZEN for any command except 'frozen', only clear it when each specific command is parsed. This allows the handling of 'reshape' to clear the bit while a lock is held. Also remove some places where we set MD_RECOVERY_NEEDED, as it is always set on non-error exit of the function. Signed-off-by: NeilBrown Fixes: 6791875e2e53 ("md: make reconfig_mutex optional for writes to md sysfs files.") --- drivers/md/md.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index d4f31e195e26..8f10f4ea70ea 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -4211,12 +4211,12 @@ action_store(struct mddev *mddev, const char *page, size_t len) if (!mddev->pers || !mddev->pers->sync_request) return -EINVAL; - if (cmd_match(page, "frozen")) - set_bit(MD_RECOVERY_FROZEN, &mddev->recovery); - else - clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery); if (cmd_match(page, "idle") || cmd_match(page, "frozen")) { + if (cmd_match(page, "frozen")) + set_bit(MD_RECOVERY_FROZEN, &mddev->recovery); + else + clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery); flush_workqueue(md_misc_wq); if (mddev->sync_thread) { set_bit(MD_RECOVERY_INTR, &mddev->recovery); @@ -4229,16 +4229,17 @@ action_store(struct mddev *mddev, const char *page, size_t len) test_bit(MD_RECOVERY_NEEDED, &mddev->recovery)) return -EBUSY; else if (cmd_match(page, "resync")) - set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); + clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery); else if (cmd_match(page, "recover")) { + clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery); set_bit(MD_RECOVERY_RECOVER, &mddev->recovery); - set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); } else if (cmd_match(page, "reshape")) { int err; if (mddev->pers->start_reshape == NULL) return -EINVAL; err = mddev_lock(mddev); if (!err) { + clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery); err = mddev->pers->start_reshape(mddev); mddev_unlock(mddev); } @@ -4250,6 +4251,7 @@ action_store(struct mddev *mddev, const char *page, size_t len) set_bit(MD_RECOVERY_CHECK, &mddev->recovery); else if (!cmd_match(page, "repair")) return -EINVAL; + clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery); set_bit(MD_RECOVERY_REQUESTED, &mddev->recovery); set_bit(MD_RECOVERY_SYNC, &mddev->recovery); } From b40eda6408e94ee286cb5720cd3f409f70e01778 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Thu, 28 May 2015 09:40:23 +0200 Subject: [PATCH 295/337] ALSA: hda - Disable Headphone Mic boost for ALC662 When headphone mic boost is above zero, some 10 - 20 second delay might occur before the headphone mic is operational. Therefore disable the headphone mic boost control (recording gain is sufficient even without it). (Note: this patch is not about the headset mic, it's about the less common mic-in only mode.) BugLink: https://bugs.launchpad.net/bugs/1454235 Suggested-by: Kailang Yang Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index e3bf72bb278c..ea3af38eee58 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4228,6 +4228,11 @@ static void alc_fixup_headset_mode_alc662(struct hda_codec *codec, if (action == HDA_FIXUP_ACT_PRE_PROBE) { spec->parse_flags |= HDA_PINCFG_HEADSET_MIC; spec->gen.hp_mic = 1; /* Mic-in is same pin as headphone */ + + /* Disable boost for mic-in permanently. (This code is only called + from quirks that guarantee that the headphone is at NID 0x1b.) */ + snd_hda_codec_write(codec, 0x1b, 0, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000); + snd_hda_override_wcaps(codec, 0x1b, get_wcaps(codec, 0x1b) & ~AC_WCAP_IN_AMP); } else alc_fixup_headset_mode(codec, fix, action); } From 7c0411d2fabc2e2702c9871ffb603e251158b317 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Thu, 28 May 2015 15:51:59 +0200 Subject: [PATCH 296/337] drm/radeon: partially revert "fix VM_CONTEXT*_PAGE_TABLE_END_ADDR handling" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We have that bug for years and some users report side effects when fixing it on older hardware. So revert it for VM_CONTEXT0_PAGE_TABLE_END_ADDR, but keep it for VM 1-15. Signed-off-by: Christian König CC: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/cik.c | 2 +- drivers/gpu/drm/radeon/evergreen.c | 2 +- drivers/gpu/drm/radeon/ni.c | 2 +- drivers/gpu/drm/radeon/r600.c | 2 +- drivers/gpu/drm/radeon/rv770.c | 2 +- drivers/gpu/drm/radeon/si.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index a0c35bbc8546..ba50f3c1c2e0 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -5822,7 +5822,7 @@ static int cik_pcie_gart_enable(struct radeon_device *rdev) L2_CACHE_BIGK_FRAGMENT_SIZE(4)); /* setup context0 */ WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR, rdev->mc.gtt_start >> 12); - WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, (rdev->mc.gtt_end >> 12) - 1); + WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, rdev->mc.gtt_end >> 12); WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR, rdev->gart.table_addr >> 12); WREG32(VM_CONTEXT0_PROTECTION_FAULT_DEFAULT_ADDR, (u32)(rdev->dummy_page.addr >> 12)); diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 05e6d6ef5963..f848acfd3fc8 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -2485,7 +2485,7 @@ static int evergreen_pcie_gart_enable(struct radeon_device *rdev) WREG32(MC_VM_MB_L1_TLB2_CNTL, tmp); WREG32(MC_VM_MB_L1_TLB3_CNTL, tmp); WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR, rdev->mc.gtt_start >> 12); - WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, (rdev->mc.gtt_end >> 12) - 1); + WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, rdev->mc.gtt_end >> 12); WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR, rdev->gart.table_addr >> 12); WREG32(VM_CONTEXT0_CNTL, ENABLE_CONTEXT | PAGE_TABLE_DEPTH(0) | RANGE_PROTECTION_FAULT_ENABLE_DEFAULT); diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index aba2f428c0a8..64d3a771920d 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -1282,7 +1282,7 @@ static int cayman_pcie_gart_enable(struct radeon_device *rdev) L2_CACHE_BIGK_FRAGMENT_SIZE(6)); /* setup context0 */ WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR, rdev->mc.gtt_start >> 12); - WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, (rdev->mc.gtt_end >> 12) - 1); + WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, rdev->mc.gtt_end >> 12); WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR, rdev->gart.table_addr >> 12); WREG32(VM_CONTEXT0_PROTECTION_FAULT_DEFAULT_ADDR, (u32)(rdev->dummy_page.addr >> 12)); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 25b4ac967742..8f6d862a1882 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1112,7 +1112,7 @@ static int r600_pcie_gart_enable(struct radeon_device *rdev) WREG32(MC_VM_L1_TLB_MCB_RD_SEM_CNTL, tmp | ENABLE_SEMAPHORE_MODE); WREG32(MC_VM_L1_TLB_MCB_WR_SEM_CNTL, tmp | ENABLE_SEMAPHORE_MODE); WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR, rdev->mc.gtt_start >> 12); - WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, (rdev->mc.gtt_end >> 12) - 1); + WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, rdev->mc.gtt_end >> 12); WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR, rdev->gart.table_addr >> 12); WREG32(VM_CONTEXT0_CNTL, ENABLE_CONTEXT | PAGE_TABLE_DEPTH(0) | RANGE_PROTECTION_FAULT_ENABLE_DEFAULT); diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index c54d6313a46d..01ee96acb398 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -921,7 +921,7 @@ static int rv770_pcie_gart_enable(struct radeon_device *rdev) WREG32(MC_VM_MB_L1_TLB2_CNTL, tmp); WREG32(MC_VM_MB_L1_TLB3_CNTL, tmp); WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR, rdev->mc.gtt_start >> 12); - WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, (rdev->mc.gtt_end >> 12) - 1); + WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, rdev->mc.gtt_end >> 12); WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR, rdev->gart.table_addr >> 12); WREG32(VM_CONTEXT0_CNTL, ENABLE_CONTEXT | PAGE_TABLE_DEPTH(0) | RANGE_PROTECTION_FAULT_ENABLE_DEFAULT); diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 5326f753e107..4c679b802bc8 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -4303,7 +4303,7 @@ static int si_pcie_gart_enable(struct radeon_device *rdev) L2_CACHE_BIGK_FRAGMENT_SIZE(4)); /* setup context0 */ WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR, rdev->mc.gtt_start >> 12); - WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, (rdev->mc.gtt_end >> 12) - 1); + WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, rdev->mc.gtt_end >> 12); WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR, rdev->gart.table_addr >> 12); WREG32(VM_CONTEXT0_PROTECTION_FAULT_DEFAULT_ADDR, (u32)(rdev->dummy_page.addr >> 12)); From 74f9ce1cf2830b94e189f4e99678dbf19aa3bc90 Mon Sep 17 00:00:00 2001 From: George Wang Date: Fri, 29 May 2015 07:39:34 +1000 Subject: [PATCH 297/337] xfs: use percpu_counter_read_positive for mp->m_icount Function percpu_counter_read just return the current counter, which can be negative. This will cause the checking of "allocated inode counts <= m_maxicount" false positive. Use percpu_counter_read_positive can solve this problem, and be consistent with the purpose to introduce percpu mechanism to xfs. Signed-off-by: George Wang Reviewed-by: Dave Chinner Signed-off-by: Dave Chinner --- fs/xfs/libxfs/xfs_ialloc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/fs/xfs/libxfs/xfs_ialloc.c b/fs/xfs/libxfs/xfs_ialloc.c index 07349a183a11..1c9e75521250 100644 --- a/fs/xfs/libxfs/xfs_ialloc.c +++ b/fs/xfs/libxfs/xfs_ialloc.c @@ -376,7 +376,7 @@ xfs_ialloc_ag_alloc( */ newlen = args.mp->m_ialloc_inos; if (args.mp->m_maxicount && - percpu_counter_read(&args.mp->m_icount) + newlen > + percpu_counter_read_positive(&args.mp->m_icount) + newlen > args.mp->m_maxicount) return -ENOSPC; args.minlen = args.maxlen = args.mp->m_ialloc_blks; @@ -1339,10 +1339,13 @@ xfs_dialloc( * If we have already hit the ceiling of inode blocks then clear * okalloc so we scan all available agi structures for a free * inode. + * + * Read rough value of mp->m_icount by percpu_counter_read_positive, + * which will sacrifice the preciseness but improve the performance. */ if (mp->m_maxicount && - percpu_counter_read(&mp->m_icount) + mp->m_ialloc_inos > - mp->m_maxicount) { + percpu_counter_read_positive(&mp->m_icount) + mp->m_ialloc_inos + > mp->m_maxicount) { noroom = 1; okalloc = 0; } From 80188b0d77d7426b494af739ac129e0e684acb84 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Fri, 29 May 2015 07:39:34 +1000 Subject: [PATCH 298/337] percpu_counter: batch size aware __percpu_counter_compare() XFS uses non-stanard batch sizes for avoiding frequent global counter updates on it's allocated inode counters, as they increment or decrement in batches of 64 inodes. Hence the standard percpu counter batch of 32 means that the counter is effectively a global counter. Currently Xfs uses a batch size of 128 so that it doesn't take the global lock on every single modification. However, Xfs also needs to compare accurately against zero, which means we need to use percpu_counter_compare(), and that has a hard-coded batch size of 32, and hence will spuriously fail to detect when it is supposed to use precise comparisons and hence the accounting goes wrong. Add __percpu_counter_compare() to take a custom batch size so we can use it sanely in XFS and factor percpu_counter_compare() to use it. Signed-off-by: Dave Chinner Acked-by: Tejun Heo Signed-off-by: Dave Chinner --- include/linux/percpu_counter.h | 13 ++++++++++++- lib/percpu_counter.c | 6 +++--- 2 files changed, 15 insertions(+), 4 deletions(-) diff --git a/include/linux/percpu_counter.h b/include/linux/percpu_counter.h index 50e50095c8d1..84a109449610 100644 --- a/include/linux/percpu_counter.h +++ b/include/linux/percpu_counter.h @@ -41,7 +41,12 @@ void percpu_counter_destroy(struct percpu_counter *fbc); void percpu_counter_set(struct percpu_counter *fbc, s64 amount); void __percpu_counter_add(struct percpu_counter *fbc, s64 amount, s32 batch); s64 __percpu_counter_sum(struct percpu_counter *fbc); -int percpu_counter_compare(struct percpu_counter *fbc, s64 rhs); +int __percpu_counter_compare(struct percpu_counter *fbc, s64 rhs, s32 batch); + +static inline int percpu_counter_compare(struct percpu_counter *fbc, s64 rhs) +{ + return __percpu_counter_compare(fbc, rhs, percpu_counter_batch); +} static inline void percpu_counter_add(struct percpu_counter *fbc, s64 amount) { @@ -116,6 +121,12 @@ static inline int percpu_counter_compare(struct percpu_counter *fbc, s64 rhs) return 0; } +static inline int +__percpu_counter_compare(struct percpu_counter *fbc, s64 rhs, s32 batch) +{ + return percpu_counter_compare(fbc, rhs); +} + static inline void percpu_counter_add(struct percpu_counter *fbc, s64 amount) { diff --git a/lib/percpu_counter.c b/lib/percpu_counter.c index 48144cdae819..f051d69f0910 100644 --- a/lib/percpu_counter.c +++ b/lib/percpu_counter.c @@ -197,13 +197,13 @@ static int percpu_counter_hotcpu_callback(struct notifier_block *nb, * Compare counter against given value. * Return 1 if greater, 0 if equal and -1 if less */ -int percpu_counter_compare(struct percpu_counter *fbc, s64 rhs) +int __percpu_counter_compare(struct percpu_counter *fbc, s64 rhs, s32 batch) { s64 count; count = percpu_counter_read(fbc); /* Check to see if rough count will be sufficient for comparison */ - if (abs(count - rhs) > (percpu_counter_batch*num_online_cpus())) { + if (abs(count - rhs) > (batch * num_online_cpus())) { if (count > rhs) return 1; else @@ -218,7 +218,7 @@ int percpu_counter_compare(struct percpu_counter *fbc, s64 rhs) else return 0; } -EXPORT_SYMBOL(percpu_counter_compare); +EXPORT_SYMBOL(__percpu_counter_compare); static int __init percpu_counter_startup(void) { From 8c1903d3081ab7c416f1bbc7905f37a265d5e2e9 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Fri, 29 May 2015 07:39:34 +1000 Subject: [PATCH 299/337] xfs: inode and free block counters need to use __percpu_counter_compare Because the counters use a custom batch size, the comparison functions need to be aware of that batch size otherwise the comparison does not work correctly. This leads to ASSERT failures on generic/027 like this: XFS: Assertion failed: 0, file: fs/xfs/xfs_mount.c, line: 1099 ------------[ cut here ]------------ .... Call Trace: [] xfs_mod_icount+0x99/0xc0 [] xfs_trans_unreserve_and_mod_sb+0x28b/0x5b0 [] xfs_log_commit_cil+0x321/0x580 [] xfs_trans_commit+0xb7/0x260 [] xfs_bmap_finish+0xcd/0x1b0 [] xfs_inactive_ifree+0x1e1/0x250 [] xfs_inactive+0x130/0x200 [] xfs_fs_evict_inode+0x91/0xf0 [] evict+0xb8/0x190 [] iput+0x18b/0x1f0 [] do_unlinkat+0x1f3/0x320 [] ? filp_close+0x5a/0x80 [] SyS_unlinkat+0x1b/0x40 [] system_call_fastpath+0x12/0x71 This is a regression introduced by commit 501ab32 ("xfs: use generic percpu counters for inode counter"). This patch fixes the same problem for both the inode counter and the free block counter in the superblocks. Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Dave Chinner --- fs/xfs/xfs_mount.c | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-) diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index 2ce7ee3b4ec1..6f23fbdfb365 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -1084,14 +1084,18 @@ xfs_log_sbcount(xfs_mount_t *mp) return xfs_sync_sb(mp, true); } +/* + * Deltas for the inode count are +/-64, hence we use a large batch size + * of 128 so we don't need to take the counter lock on every update. + */ +#define XFS_ICOUNT_BATCH 128 int xfs_mod_icount( struct xfs_mount *mp, int64_t delta) { - /* deltas are +/-64, hence the large batch size of 128. */ - __percpu_counter_add(&mp->m_icount, delta, 128); - if (percpu_counter_compare(&mp->m_icount, 0) < 0) { + __percpu_counter_add(&mp->m_icount, delta, XFS_ICOUNT_BATCH); + if (__percpu_counter_compare(&mp->m_icount, 0, XFS_ICOUNT_BATCH) < 0) { ASSERT(0); percpu_counter_add(&mp->m_icount, -delta); return -EINVAL; @@ -1113,6 +1117,14 @@ xfs_mod_ifree( return 0; } +/* + * Deltas for the block count can vary from 1 to very large, but lock contention + * only occurs on frequent small block count updates such as in the delayed + * allocation path for buffered writes (page a time updates). Hence we set + * a large batch count (1024) to minimise global counter updates except when + * we get near to ENOSPC and we have to be very accurate with our updates. + */ +#define XFS_FDBLOCKS_BATCH 1024 int xfs_mod_fdblocks( struct xfs_mount *mp, @@ -1151,25 +1163,19 @@ xfs_mod_fdblocks( * Taking blocks away, need to be more accurate the closer we * are to zero. * - * batch size is set to a maximum of 1024 blocks - if we are - * allocating of freeing extents larger than this then we aren't - * going to be hammering the counter lock so a lock per update - * is not a problem. - * * If the counter has a value of less than 2 * max batch size, * then make everything serialise as we are real close to * ENOSPC. */ -#define __BATCH 1024 - if (percpu_counter_compare(&mp->m_fdblocks, 2 * __BATCH) < 0) + if (__percpu_counter_compare(&mp->m_fdblocks, 2 * XFS_FDBLOCKS_BATCH, + XFS_FDBLOCKS_BATCH) < 0) batch = 1; else - batch = __BATCH; -#undef __BATCH + batch = XFS_FDBLOCKS_BATCH; __percpu_counter_add(&mp->m_fdblocks, delta, batch); - if (percpu_counter_compare(&mp->m_fdblocks, - XFS_ALLOC_SET_ASIDE(mp)) >= 0) { + if (__percpu_counter_compare(&mp->m_fdblocks, XFS_ALLOC_SET_ASIDE(mp), + XFS_FDBLOCKS_BATCH) >= 0) { /* we had space! */ return 0; } From 6dea405eee9e5e73eb54a1dbcc5b65047113cd92 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Fri, 29 May 2015 07:40:06 +1000 Subject: [PATCH 300/337] xfs: extent size hints can round up extents past MAXEXTLEN This results in BMBT corruption, as seen by this test: # mkfs.xfs -f -d size=40051712b,agcount=4 /dev/vdc .... # mount /dev/vdc /mnt/scratch # xfs_io -ft -c "extsize 16m" -c "falloc 0 30g" -c "bmap -vp" /mnt/scratch/foo which results in this failure on a debug kernel: XFS: Assertion failed: (blockcount & xfs_mask64hi(64-BMBT_BLOCKCOUNT_BITLEN)) == 0, file: fs/xfs/libxfs/xfs_bmap_btree.c, line: 211 .... Call Trace: [] xfs_bmbt_set_allf+0x8f/0x100 [] xfs_bmbt_set_all+0x1d/0x20 [] xfs_iext_insert+0x9e/0x120 [] ? xfs_bmap_add_extent_hole_real+0x1c6/0xc70 [] xfs_bmap_add_extent_hole_real+0x1c6/0xc70 [] xfs_bmapi_write+0x72b/0xed0 [] ? kmem_cache_alloc+0x15c/0x170 [] xfs_alloc_file_space+0x160/0x400 [] ? down_write+0x29/0x60 [] xfs_file_fallocate+0x29b/0x310 [] ? __sb_start_write+0x58/0x120 [] ? do_vfs_ioctl+0x318/0x570 [] vfs_fallocate+0x140/0x260 [] SyS_fallocate+0x48/0x80 [] system_call_fastpath+0x12/0x17 The tracepoint that indicates the extent that triggered the assert failure is: xfs_iext_insert: idx 0 offset 0 block 16777224 count 2097152 flag 1 Clearly indicating that the extent length is greater than MAXEXTLEN, which is 2097151. A prior trace point shows the allocation was an exact size match and that a length greater than MAXEXTLEN was asked for: xfs_alloc_size_done: agno 1 agbno 8 minlen 2097152 maxlen 2097152 ^^^^^^^ ^^^^^^^ We don't see this problem with extent size hints through the IO path because we can't do single IOs large enough to trigger MAXEXTLEN allocation. fallocate(), OTOH, is not limited in it's allocation sizes and so needs help here. The issue is that the extent size hint alignment is rounding up the extent size past MAXEXTLEN, because xfs_bmapi_write() is not taking into account extent size hints when calculating the maximum extent length to allocate. xfs_bmapi_reserve_delalloc() is already doing this, but direct extent allocation is not. Unfortunately, the calculation in xfs_bmapi_reserve_delalloc() is wrong, and it works only because delayed allocation extents are not limited in size to MAXEXTLEN in the in-core extent tree. hence this calculation does not work for direct allocation, and the delalloc code needs fixing. This may, in fact be the underlying bug that occassionally causes transaction overruns in delayed allocation extent conversion, so now we know it's wrong we should fix it, too. Many thanks to Brian Foster for finding this problem during review of this patch. Hence the fix, after much code reading, is to allow xfs_bmap_extsize_align() to align partial extents when full alignment would extend the alignment past MAXEXTLEN. We can safely do this because all callers have higher layer allocation loops that already handle short allocations, and so will simply run another allocation to cover the remainder of the requested allocation range that we ignored during alignment. The advantage of this approach is that it also removes the need for callers to do anything other than limit their requests to MAXEXTLEN - they don't really need to be aware of extent size hints at all. Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Dave Chinner --- fs/xfs/libxfs/xfs_bmap.c | 33 ++++++++++++++++++++------------- 1 file changed, 20 insertions(+), 13 deletions(-) diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c index aeffeaaac0ec..f1026e86dabc 100644 --- a/fs/xfs/libxfs/xfs_bmap.c +++ b/fs/xfs/libxfs/xfs_bmap.c @@ -3224,12 +3224,24 @@ xfs_bmap_extsize_align( align_alen += temp; align_off -= temp; } - /* - * Same adjustment for the end of the requested area. - */ - if ((temp = (align_alen % extsz))) { + + /* Same adjustment for the end of the requested area. */ + temp = (align_alen % extsz); + if (temp) align_alen += extsz - temp; - } + + /* + * For large extent hint sizes, the aligned extent might be larger than + * MAXEXTLEN. In that case, reduce the size by an extsz so that it pulls + * the length back under MAXEXTLEN. The outer allocation loops handle + * short allocation just fine, so it is safe to do this. We only want to + * do it when we are forced to, though, because it means more allocation + * operations are required. + */ + while (align_alen > MAXEXTLEN) + align_alen -= extsz; + ASSERT(align_alen <= MAXEXTLEN); + /* * If the previous block overlaps with this proposed allocation * then move the start forward without adjusting the length. @@ -3318,7 +3330,9 @@ xfs_bmap_extsize_align( return -EINVAL; } else { ASSERT(orig_off >= align_off); - ASSERT(orig_end <= align_off + align_alen); + /* see MAXEXTLEN handling above */ + ASSERT(orig_end <= align_off + align_alen || + align_alen + extsz > MAXEXTLEN); } #ifdef DEBUG @@ -4099,13 +4113,6 @@ xfs_bmapi_reserve_delalloc( /* Figure out the extent size, adjust alen */ extsz = xfs_get_extsz_hint(ip); if (extsz) { - /* - * Make sure we don't exceed a single extent length when we - * align the extent by reducing length we are going to - * allocate by the maximum amount extent size aligment may - * require. - */ - alen = XFS_FILBLKS_MIN(len, MAXEXTLEN - (2 * extsz - 1)); error = xfs_bmap_extsize_align(mp, got, prev, extsz, rt, eof, 1, 0, &aoff, &alen); ASSERT(!error); From 6dfe5a049f2d48582050339d2a6b6fda36dfd14c Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Fri, 29 May 2015 07:40:08 +1000 Subject: [PATCH 301/337] xfs: xfs_attr_inactive leaves inconsistent attr fork state behind xfs_attr_inactive() is supposed to clean up the attribute fork when the inode is being freed. While it removes attribute fork extents, it completely ignores attributes in local format, which means that there can still be active attributes on the inode after xfs_attr_inactive() has run. This leads to problems with concurrent inode writeback - the in-core inode attribute fork is removed without locking on the assumption that nothing will be attempting to access the attribute fork after a call to xfs_attr_inactive() because it isn't supposed to exist on disk any more. To fix this, make xfs_attr_inactive() completely remove all traces of the attribute fork from the inode, regardless of it's state. Further, also remove the in-core attribute fork structure safely so that there is nothing further that needs to be done by callers to clean up the attribute fork. This means we can remove the in-core and on-disk attribute forks atomically. Also, on error simply remove the in-memory attribute fork. There's nothing that can be done with it once we have failed to remove the on-disk attribute fork, so we may as well just blow it away here anyway. cc: # 3.12 to 4.0 Reported-by: Waiman Long Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Dave Chinner --- fs/xfs/libxfs/xfs_attr_leaf.c | 8 ++-- fs/xfs/libxfs/xfs_attr_leaf.h | 2 +- fs/xfs/xfs_attr_inactive.c | 85 ++++++++++++++++++++--------------- fs/xfs/xfs_inode.c | 12 ++--- 4 files changed, 59 insertions(+), 48 deletions(-) diff --git a/fs/xfs/libxfs/xfs_attr_leaf.c b/fs/xfs/libxfs/xfs_attr_leaf.c index 04e79d57bca6..e9d401ce93bb 100644 --- a/fs/xfs/libxfs/xfs_attr_leaf.c +++ b/fs/xfs/libxfs/xfs_attr_leaf.c @@ -574,8 +574,8 @@ xfs_attr_shortform_add(xfs_da_args_t *args, int forkoff) * After the last attribute is removed revert to original inode format, * making all literal area available to the data fork once more. */ -STATIC void -xfs_attr_fork_reset( +void +xfs_attr_fork_remove( struct xfs_inode *ip, struct xfs_trans *tp) { @@ -641,7 +641,7 @@ xfs_attr_shortform_remove(xfs_da_args_t *args) (mp->m_flags & XFS_MOUNT_ATTR2) && (dp->i_d.di_format != XFS_DINODE_FMT_BTREE) && !(args->op_flags & XFS_DA_OP_ADDNAME)) { - xfs_attr_fork_reset(dp, args->trans); + xfs_attr_fork_remove(dp, args->trans); } else { xfs_idata_realloc(dp, -size, XFS_ATTR_FORK); dp->i_d.di_forkoff = xfs_attr_shortform_bytesfit(dp, totsize); @@ -905,7 +905,7 @@ xfs_attr3_leaf_to_shortform( if (forkoff == -1) { ASSERT(dp->i_mount->m_flags & XFS_MOUNT_ATTR2); ASSERT(dp->i_d.di_format != XFS_DINODE_FMT_BTREE); - xfs_attr_fork_reset(dp, args->trans); + xfs_attr_fork_remove(dp, args->trans); goto out; } diff --git a/fs/xfs/libxfs/xfs_attr_leaf.h b/fs/xfs/libxfs/xfs_attr_leaf.h index 025c4b820c03..882c8d338891 100644 --- a/fs/xfs/libxfs/xfs_attr_leaf.h +++ b/fs/xfs/libxfs/xfs_attr_leaf.h @@ -53,7 +53,7 @@ int xfs_attr_shortform_remove(struct xfs_da_args *args); int xfs_attr_shortform_list(struct xfs_attr_list_context *context); int xfs_attr_shortform_allfit(struct xfs_buf *bp, struct xfs_inode *dp); int xfs_attr_shortform_bytesfit(xfs_inode_t *dp, int bytes); - +void xfs_attr_fork_remove(struct xfs_inode *ip, struct xfs_trans *tp); /* * Internal routines when attribute fork size == XFS_LBSIZE(mp). diff --git a/fs/xfs/xfs_attr_inactive.c b/fs/xfs/xfs_attr_inactive.c index f9c1c64782d3..3fbf167cfb4c 100644 --- a/fs/xfs/xfs_attr_inactive.c +++ b/fs/xfs/xfs_attr_inactive.c @@ -380,23 +380,31 @@ xfs_attr3_root_inactive( return error; } +/* + * xfs_attr_inactive kills all traces of an attribute fork on an inode. It + * removes both the on-disk and in-memory inode fork. Note that this also has to + * handle the condition of inodes without attributes but with an attribute fork + * configured, so we can't use xfs_inode_hasattr() here. + * + * The in-memory attribute fork is removed even on error. + */ int -xfs_attr_inactive(xfs_inode_t *dp) +xfs_attr_inactive( + struct xfs_inode *dp) { - xfs_trans_t *trans; - xfs_mount_t *mp; - int error; + struct xfs_trans *trans; + struct xfs_mount *mp; + int cancel_flags = 0; + int lock_mode = XFS_ILOCK_SHARED; + int error = 0; mp = dp->i_mount; ASSERT(! XFS_NOT_DQATTACHED(mp, dp)); - xfs_ilock(dp, XFS_ILOCK_SHARED); - if (!xfs_inode_hasattr(dp) || - dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) { - xfs_iunlock(dp, XFS_ILOCK_SHARED); - return 0; - } - xfs_iunlock(dp, XFS_ILOCK_SHARED); + xfs_ilock(dp, lock_mode); + if (!XFS_IFORK_Q(dp)) + goto out_destroy_fork; + xfs_iunlock(dp, lock_mode); /* * Start our first transaction of the day. @@ -408,13 +416,18 @@ xfs_attr_inactive(xfs_inode_t *dp) * the inode in every transaction to let it float upward through * the log. */ + lock_mode = 0; trans = xfs_trans_alloc(mp, XFS_TRANS_ATTRINVAL); error = xfs_trans_reserve(trans, &M_RES(mp)->tr_attrinval, 0, 0); - if (error) { - xfs_trans_cancel(trans, 0); - return error; - } - xfs_ilock(dp, XFS_ILOCK_EXCL); + if (error) + goto out_cancel; + + lock_mode = XFS_ILOCK_EXCL; + cancel_flags = XFS_TRANS_RELEASE_LOG_RES | XFS_TRANS_ABORT; + xfs_ilock(dp, lock_mode); + + if (!XFS_IFORK_Q(dp)) + goto out_cancel; /* * No need to make quota reservations here. We expect to release some @@ -422,29 +435,31 @@ xfs_attr_inactive(xfs_inode_t *dp) */ xfs_trans_ijoin(trans, dp, 0); - /* - * Decide on what work routines to call based on the inode size. - */ - if (!xfs_inode_hasattr(dp) || - dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) { - error = 0; - goto out; - } - error = xfs_attr3_root_inactive(&trans, dp); - if (error) - goto out; + /* invalidate and truncate the attribute fork extents */ + if (dp->i_d.di_aformat != XFS_DINODE_FMT_LOCAL) { + error = xfs_attr3_root_inactive(&trans, dp); + if (error) + goto out_cancel; - error = xfs_itruncate_extents(&trans, dp, XFS_ATTR_FORK, 0); - if (error) - goto out; + error = xfs_itruncate_extents(&trans, dp, XFS_ATTR_FORK, 0); + if (error) + goto out_cancel; + } + + /* Reset the attribute fork - this also destroys the in-core fork */ + xfs_attr_fork_remove(dp, trans); error = xfs_trans_commit(trans, XFS_TRANS_RELEASE_LOG_RES); - xfs_iunlock(dp, XFS_ILOCK_EXCL); - + xfs_iunlock(dp, lock_mode); return error; -out: - xfs_trans_cancel(trans, XFS_TRANS_RELEASE_LOG_RES|XFS_TRANS_ABORT); - xfs_iunlock(dp, XFS_ILOCK_EXCL); +out_cancel: + xfs_trans_cancel(trans, cancel_flags); +out_destroy_fork: + /* kill the in-core attr fork before we drop the inode lock */ + if (dp->i_afp) + xfs_idestroy_fork(dp, XFS_ATTR_FORK); + if (lock_mode) + xfs_iunlock(dp, lock_mode); return error; } diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index d6ebc85192b7..1117dd3ba123 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -1946,21 +1946,17 @@ xfs_inactive( /* * If there are attributes associated with the file then blow them away * now. The code calls a routine that recursively deconstructs the - * attribute fork. We need to just commit the current transaction - * because we can't use it for xfs_attr_inactive(). + * attribute fork. If also blows away the in-core attribute fork. */ - if (ip->i_d.di_anextents > 0) { - ASSERT(ip->i_d.di_forkoff != 0); - + if (XFS_IFORK_Q(ip)) { error = xfs_attr_inactive(ip); if (error) return; } - if (ip->i_afp) - xfs_idestroy_fork(ip, XFS_ATTR_FORK); - + ASSERT(!ip->i_afp); ASSERT(ip->i_d.di_anextents == 0); + ASSERT(ip->i_d.di_forkoff == 0); /* * Free the inode. From cddc116228cb9d51d3224d23ba3e61fbbc3ec3d2 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Fri, 29 May 2015 07:40:32 +1000 Subject: [PATCH 302/337] xfs: xfs_iozero can return positive errno It was missed when we converted everything in XFs to use negative error numbers, so fix it now. Bug introduced in 3.17 by commit 2451337 ("xfs: global error sign conversion"), and should go back to stable kernels. Thanks to Brian Foster for noticing it. cc: # 3.17, 3.18, 3.19, 4.0 Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Dave Chinner --- fs/xfs/xfs_file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c index 8121e75352ee..3b7591224f4a 100644 --- a/fs/xfs/xfs_file.c +++ b/fs/xfs/xfs_file.c @@ -124,7 +124,7 @@ xfs_iozero( status = 0; } while (count); - return (-status); + return status; } int From 22419ac9fe5e79483596cebdbd1d1209c18bac1a Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Fri, 29 May 2015 08:14:55 +1000 Subject: [PATCH 303/337] xfs: fix broken i_nlink accounting for whiteout tmpfile inode XFS uses the internal tmpfile() infrastructure for the whiteout inode used for RENAME_WHITEOUT operations. For tmpfile inodes, XFS allocates the inode, drops di_nlink, adds the inode to the agi unlinked list, calls d_tmpfile() which correspondingly drops i_nlink of the vfs inode, and then finishes the common inode setup (e.g., clear I_NEW and unlock). The d_tmpfile() call was originally made inxfs_create_tmpfile(), but was pulled up out of that function as part of the following commit to resolve a deadlock issue: 330033d6 xfs: fix tmpfile/selinux deadlock and initialize security As a result, callers of xfs_create_tmpfile() are responsible for either calling d_tmpfile() or fixing up i_nlink appropriately. The whiteout tmpfile allocation helper does neither. As a result, the vfs ->i_nlink becomes inconsistent with the on-disk ->di_nlink once xfs_rename() links it back into the source dentry and calls xfs_bumplink(). Update the assert in xfs_rename() to help detect this problem in the future and update xfs_rename_alloc_whiteout() to decrement the link count as part of the manual tmpfile inode setup. Signed-off-by: Brian Foster Reviewed-by: Dave Chinner Signed-off-by: Dave Chinner --- fs/xfs/xfs_inode.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 1117dd3ba123..539a85fddbc2 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -2879,7 +2879,13 @@ xfs_rename_alloc_whiteout( if (error) return error; - /* Satisfy xfs_bumplink that this is a real tmpfile */ + /* + * Prepare the tmpfile inode as if it were created through the VFS. + * Otherwise, the link increment paths will complain about nlink 0->1. + * Drop the link count as done by d_tmpfile(), complete the inode setup + * and flag it as linkable. + */ + drop_nlink(VFS_I(tmpfile)); xfs_finish_inode_setup(tmpfile); VFS_I(tmpfile)->i_state |= I_LINKABLE; @@ -3147,7 +3153,7 @@ xfs_rename( * intermediate state on disk. */ if (wip) { - ASSERT(wip->i_d.di_nlink == 0); + ASSERT(VFS_I(wip)->i_nlink == 0 && wip->i_d.di_nlink == 0); error = xfs_bumplink(tp, wip); if (error) goto out_trans_abort; From 9ee971a0b8efbae472882b1d3e8e736f4d6e3da9 Mon Sep 17 00:00:00 2001 From: Lars Seipel Date: Thu, 21 May 2015 03:04:10 +0200 Subject: [PATCH 304/337] drm/nouveau/gr/gf100-: fix wrong constant definition Commit 3740c82590d8 ("drm/nouveau/gr/gf100-: add symbolic names for classes") introduced a wrong macro definition causing acceleration setup to fail. Fix it. Signed-off-by: Lars Seipel Fixes: 3740c82590d8 ("drm/nouveau/gr/gf100-: add symbolic names for classes") Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/include/nvif/class.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/include/nvif/class.h b/drivers/gpu/drm/nouveau/include/nvif/class.h index 0b5af0fe8659..64f8b2f687d2 100644 --- a/drivers/gpu/drm/nouveau/include/nvif/class.h +++ b/drivers/gpu/drm/nouveau/include/nvif/class.h @@ -14,7 +14,7 @@ #define FERMI_TWOD_A 0x0000902d -#define FERMI_MEMORY_TO_MEMORY_FORMAT_A 0x0000903d +#define FERMI_MEMORY_TO_MEMORY_FORMAT_A 0x00009039 #define KEPLER_INLINE_TO_MEMORY_A 0x0000a040 #define KEPLER_INLINE_TO_MEMORY_B 0x0000a140 From c9ab50d21032ca8c5013f4d57e9aa866da78d7c7 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 21 May 2015 15:44:15 +1000 Subject: [PATCH 305/337] drm/nouveau/devinit/gf100: make the force-post condition more obvious And also more generic, so it can be used on newer chipsets. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gf100.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gf100.c b/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gf100.c index e8778c67578e..9f09037731fc 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gf100.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gf100.c @@ -95,7 +95,9 @@ gf100_devinit_ctor(struct nvkm_object *parent, struct nvkm_object *engine, struct nvkm_oclass *oclass, void *data, u32 size, struct nvkm_object **pobject) { + struct nvkm_devinit_impl *impl = (void *)oclass; struct nv50_devinit_priv *priv; + u64 disable; int ret; ret = nvkm_devinit_create(parent, engine, oclass, &priv); @@ -103,7 +105,8 @@ gf100_devinit_ctor(struct nvkm_object *parent, struct nvkm_object *engine, if (ret) return ret; - if (nv_rd32(priv, 0x022500) & 0x00000001) + disable = impl->disable(&priv->base); + if (disable & (1ULL << NVDEV_ENGINE_DISP)) priv->base.post = true; return 0; From 4d4d6f7520b6fce065a8b8303ace9ec48b9e96e9 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 21 May 2015 15:47:16 +1000 Subject: [PATCH 306/337] drm/nouveau/devinit/gm100-: force devinit table execution on boards without PDISP Should fix fdo#89558 Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gf100.c | 2 +- drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gm107.c | 2 +- drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gm204.c | 2 +- drivers/gpu/drm/nouveau/nvkm/subdev/devinit/nv50.h | 3 +++ 4 files changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gf100.c b/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gf100.c index 9f09037731fc..c61102f70805 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gf100.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gf100.c @@ -90,7 +90,7 @@ gf100_devinit_disable(struct nvkm_devinit *devinit) return disable; } -static int +int gf100_devinit_ctor(struct nvkm_object *parent, struct nvkm_object *engine, struct nvkm_oclass *oclass, void *data, u32 size, struct nvkm_object **pobject) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gm107.c b/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gm107.c index b345a53e881d..87ca0ece37b4 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gm107.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gm107.c @@ -48,7 +48,7 @@ struct nvkm_oclass * gm107_devinit_oclass = &(struct nvkm_devinit_impl) { .base.handle = NV_SUBDEV(DEVINIT, 0x07), .base.ofuncs = &(struct nvkm_ofuncs) { - .ctor = nv50_devinit_ctor, + .ctor = gf100_devinit_ctor, .dtor = _nvkm_devinit_dtor, .init = nv50_devinit_init, .fini = _nvkm_devinit_fini, diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gm204.c b/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gm204.c index 535172c5f1ad..1076fcf0d716 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gm204.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gm204.c @@ -161,7 +161,7 @@ struct nvkm_oclass * gm204_devinit_oclass = &(struct nvkm_devinit_impl) { .base.handle = NV_SUBDEV(DEVINIT, 0x07), .base.ofuncs = &(struct nvkm_ofuncs) { - .ctor = nv50_devinit_ctor, + .ctor = gf100_devinit_ctor, .dtor = _nvkm_devinit_dtor, .init = nv50_devinit_init, .fini = _nvkm_devinit_fini, diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/nv50.h b/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/nv50.h index b882b65ff3cd..9243521c80ac 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/nv50.h +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/nv50.h @@ -15,6 +15,9 @@ int nv50_devinit_pll_set(struct nvkm_devinit *, u32, u32); int gt215_devinit_pll_set(struct nvkm_devinit *, u32, u32); +int gf100_devinit_ctor(struct nvkm_object *, struct nvkm_object *, + struct nvkm_oclass *, void *, u32, + struct nvkm_object **); int gf100_devinit_pll_set(struct nvkm_devinit *, u32, u32); u64 gm107_devinit_disable(struct nvkm_devinit *); From aaea3938b5637ffb1d77e8b7707c207b24e02937 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 4 May 2015 12:26:00 +1000 Subject: [PATCH 307/337] drm/nouveau/gr/gm204: remove a stray printk Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvkm/engine/gr/gm204.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/gr/gm204.c b/drivers/gpu/drm/nouveau/nvkm/engine/gr/gm204.c index 2f5eadd12a9b..fdb1dcf16a59 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/gr/gm204.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/gr/gm204.c @@ -329,7 +329,6 @@ gm204_gr_init(struct nvkm_object *object) nv_mask(priv, 0x419cc0, 0x00000008, 0x00000008); for (gpc = 0; gpc < priv->gpc_nr; gpc++) { - printk(KERN_ERR "ppc %d %d\n", gpc, priv->ppc_nr[gpc]); for (ppc = 0; ppc < priv->ppc_nr[gpc]; ppc++) nv_wr32(priv, PPC_UNIT(gpc, ppc, 0x038), 0xc0000000); nv_wr32(priv, GPC_UNIT(gpc, 0x0420), 0xc0000000); From e5feb1ebaadfb1f5f70a3591e762d780232a4f5d Mon Sep 17 00:00:00 2001 From: "Shreyas B. Prabhu" Date: Thu, 28 May 2015 15:44:16 -0700 Subject: [PATCH 308/337] tracing/mm: don't trace kmem_cache_free on offline cpus Since tracepoints use RCU for protection, they must not be called on offline cpus. trace_kmem_cache_free can be called on an offline cpu in this scenario caught by LOCKDEP: =============================== [ INFO: suspicious RCU usage. ] 4.1.0-rc1+ #9 Not tainted ------------------------------- include/trace/events/kmem.h:148 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from offline CPU! rcu_scheduler_active = 1, debug_locks = 1 no locks held by swapper/1/0. stack backtrace: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.1.0-rc1+ #9 Call Trace: .dump_stack+0x98/0xd4 (unreliable) .lockdep_rcu_suspicious+0x108/0x170 .kmem_cache_free+0x344/0x4b0 .__mmdrop+0x4c/0x160 .idle_task_exit+0xf0/0x100 .pnv_smp_cpu_kill_self+0x58/0x2c0 .cpu_die+0x34/0x50 .arch_cpu_idle_dead+0x20/0x40 .cpu_startup_entry+0x708/0x7a0 .start_secondary+0x36c/0x3a0 start_secondary_prolog+0x10/0x14 Fix this by converting kmem_cache_free trace point into TRACE_EVENT_CONDITION where condition is cpu_online(smp_processor_id()) Signed-off-by: Shreyas B. Prabhu Reported-by: Aneesh Kumar K.V Reviewed-by: Preeti U Murthy Acked-by: Steven Rostedt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/trace/events/kmem.h | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/include/trace/events/kmem.h b/include/trace/events/kmem.h index 81ea59812117..78efa0a197a9 100644 --- a/include/trace/events/kmem.h +++ b/include/trace/events/kmem.h @@ -140,11 +140,22 @@ DEFINE_EVENT(kmem_free, kfree, TP_ARGS(call_site, ptr) ); -DEFINE_EVENT(kmem_free, kmem_cache_free, +DEFINE_EVENT_CONDITION(kmem_free, kmem_cache_free, TP_PROTO(unsigned long call_site, const void *ptr), - TP_ARGS(call_site, ptr) + TP_ARGS(call_site, ptr), + + /* + * This trace can be potentially called from an offlined cpu. + * Since trace points use RCU and RCU should not be used from + * offline cpus, filter such calls out. + * While this trace can be called from a preemptable section, + * it has no impact on the condition since tasks can migrate + * only from online cpus to other online cpus. Thus its safe + * to use raw_smp_processor_id. + */ + TP_CONDITION(cpu_online(raw_smp_processor_id())) ); TRACE_EVENT(mm_page_free, From 1f0c27b50f4f2567e649f49d77daee2bbf3f40e5 Mon Sep 17 00:00:00 2001 From: "Shreyas B. Prabhu" Date: Thu, 28 May 2015 15:44:19 -0700 Subject: [PATCH 309/337] tracing/mm: don't trace mm_page_free on offline cpus Since tracepoints use RCU for protection, they must not be called on offline cpus. trace_mm_page_free can be called on an offline cpu in this scenario caught by LOCKDEP: =============================== [ INFO: suspicious RCU usage. ] 4.1.0-rc1+ #9 Not tainted ------------------------------- include/trace/events/kmem.h:170 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from offline CPU! rcu_scheduler_active = 1, debug_locks = 1 no locks held by swapper/1/0. stack backtrace: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.1.0-rc1+ #9 Call Trace: .dump_stack+0x98/0xd4 (unreliable) .lockdep_rcu_suspicious+0x108/0x170 .free_pages_prepare+0x494/0x680 .free_hot_cold_page+0x50/0x280 .destroy_context+0x90/0xd0 .__mmdrop+0x58/0x160 .idle_task_exit+0xf0/0x100 .pnv_smp_cpu_kill_self+0x58/0x2c0 .cpu_die+0x34/0x50 .arch_cpu_idle_dead+0x20/0x40 .cpu_startup_entry+0x708/0x7a0 .start_secondary+0x36c/0x3a0 start_secondary_prolog+0x10/0x14 Fix this by converting mm_page_free trace point into TRACE_EVENT_CONDITION where condition is cpu_online(smp_processor_id()) Signed-off-by: Shreyas B. Prabhu Reviewed-by: Preeti U Murthy Acked-by: Steven Rostedt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/trace/events/kmem.h | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/include/trace/events/kmem.h b/include/trace/events/kmem.h index 78efa0a197a9..aa863549e77a 100644 --- a/include/trace/events/kmem.h +++ b/include/trace/events/kmem.h @@ -158,12 +158,24 @@ DEFINE_EVENT_CONDITION(kmem_free, kmem_cache_free, TP_CONDITION(cpu_online(raw_smp_processor_id())) ); -TRACE_EVENT(mm_page_free, +TRACE_EVENT_CONDITION(mm_page_free, TP_PROTO(struct page *page, unsigned int order), TP_ARGS(page, order), + + /* + * This trace can be potentially called from an offlined cpu. + * Since trace points use RCU and RCU should not be used from + * offline cpus, filter such calls out. + * While this trace can be called from a preemptable section, + * it has no impact on the condition since tasks can migrate + * only from online cpus to other online cpus. Thus its safe + * to use raw_smp_processor_id. + */ + TP_CONDITION(cpu_online(raw_smp_processor_id())), + TP_STRUCT__entry( __field( unsigned long, pfn ) __field( unsigned int, order ) From 649b8de2f75145bf14cb1783688e16d51ac9b89a Mon Sep 17 00:00:00 2001 From: "Shreyas B. Prabhu" Date: Thu, 28 May 2015 15:44:22 -0700 Subject: [PATCH 310/337] tracing/mm: don't trace mm_page_pcpu_drain on offline cpus Since tracepoints use RCU for protection, they must not be called on offline cpus. trace_mm_page_pcpu_drain can be called on an offline cpu in this scenario caught by LOCKDEP: =============================== [ INFO: suspicious RCU usage. ] 4.1.0-rc1+ #9 Not tainted ------------------------------- include/trace/events/kmem.h:265 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from offline CPU! rcu_scheduler_active = 1, debug_locks = 1 1 lock held by swapper/5/0: #0: (&(&zone->lock)->rlock){..-...}, at: [] .free_pcppages_bulk+0x70/0x920 stack backtrace: CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.1.0-rc1+ #9 Call Trace: .dump_stack+0x98/0xd4 (unreliable) .lockdep_rcu_suspicious+0x108/0x170 .free_pcppages_bulk+0x60c/0x920 .free_hot_cold_page+0x208/0x280 .destroy_context+0x90/0xd0 .__mmdrop+0x58/0x160 .idle_task_exit+0xf0/0x100 .pnv_smp_cpu_kill_self+0x58/0x2c0 .cpu_die+0x34/0x50 .arch_cpu_idle_dead+0x20/0x40 .cpu_startup_entry+0x708/0x7a0 .start_secondary+0x36c/0x3a0 start_secondary_prolog+0x10/0x14 Fix this by converting mm_page_pcpu_drain trace point into TRACE_EVENT_CONDITION where condition is cpu_online(smp_processor_id()) Signed-off-by: Shreyas B. Prabhu Reviewed-by: Preeti U Murthy Acked-by: Steven Rostedt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/trace/events/kmem.h | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) diff --git a/include/trace/events/kmem.h b/include/trace/events/kmem.h index aa863549e77a..f7554fd7fc62 100644 --- a/include/trace/events/kmem.h +++ b/include/trace/events/kmem.h @@ -276,12 +276,35 @@ DEFINE_EVENT(mm_page, mm_page_alloc_zone_locked, TP_ARGS(page, order, migratetype) ); -DEFINE_EVENT_PRINT(mm_page, mm_page_pcpu_drain, +TRACE_EVENT_CONDITION(mm_page_pcpu_drain, TP_PROTO(struct page *page, unsigned int order, int migratetype), TP_ARGS(page, order, migratetype), + /* + * This trace can be potentially called from an offlined cpu. + * Since trace points use RCU and RCU should not be used from + * offline cpus, filter such calls out. + * While this trace can be called from a preemptable section, + * it has no impact on the condition since tasks can migrate + * only from online cpus to other online cpus. Thus its safe + * to use raw_smp_processor_id. + */ + TP_CONDITION(cpu_online(raw_smp_processor_id())), + + TP_STRUCT__entry( + __field( unsigned long, pfn ) + __field( unsigned int, order ) + __field( int, migratetype ) + ), + + TP_fast_assign( + __entry->pfn = page ? page_to_pfn(page) : -1UL; + __entry->order = order; + __entry->migratetype = migratetype; + ), + TP_printk("page=%p pfn=%lu order=%d migratetype=%d", pfn_to_page(__entry->pfn), __entry->pfn, __entry->order, __entry->migratetype) From 2b1d3ae940acd11be44c6eced5873d47c2e00ffa Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 28 May 2015 15:44:24 -0700 Subject: [PATCH 311/337] fs/binfmt_elf.c:load_elf_binary(): return -EINVAL on zero-length mappings load_elf_binary() returns `retval', not `error'. Fixes: a87938b2e246b81b4fb ("fs/binfmt_elf.c: fix bug in loading of PIE binaries") Reported-by: James Hogan Cc: Michael Davidson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/binfmt_elf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index 241ef68d2893..cd46e4158830 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -918,7 +918,7 @@ static int load_elf_binary(struct linux_binprm *bprm) total_size = total_mapping_size(elf_phdata, loc->elf_ex.e_phnum); if (!total_size) { - error = -EINVAL; + retval = -EINVAL; goto out_free_dentry; } } From cd4e6c91a114a23b0b8d61d460a2d1d14e3b45f4 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 28 May 2015 15:44:27 -0700 Subject: [PATCH 312/337] MAINTAINERS: update CAPABILITIES pattern Commit 1ddd3b4e07a4 ("LSM: Remove unused capability.c") removed the file, remove the file pattern. Signed-off-by: Joe Perches Acked-by: Casey Schaufler Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 474bcb6c0bac..af802b357b6a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2427,7 +2427,6 @@ L: linux-security-module@vger.kernel.org S: Supported F: include/linux/capability.h F: include/uapi/linux/capability.h -F: security/capability.c F: security/commoncap.c F: kernel/capability.c From dcbff39da3d815f08750552fdd04f96b51751129 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Thu, 28 May 2015 15:44:29 -0700 Subject: [PATCH 313/337] fs, omfs: add NULL terminator in the end up the token list match_token() expects a NULL terminator at the end of the token list so that it would know where to stop. Not having one causes it to overrun to invalid memory. In practice, passing a mount option that omfs didn't recognize would sometimes panic the system. Signed-off-by: Sasha Levin Signed-off-by: Bob Copeland Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/omfs/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/omfs/inode.c b/fs/omfs/inode.c index 138321b0c6c2..70d4191cf33d 100644 --- a/fs/omfs/inode.c +++ b/fs/omfs/inode.c @@ -359,7 +359,7 @@ nomem: } enum { - Opt_uid, Opt_gid, Opt_umask, Opt_dmask, Opt_fmask + Opt_uid, Opt_gid, Opt_umask, Opt_dmask, Opt_fmask, Opt_err }; static const match_table_t tokens = { @@ -368,6 +368,7 @@ static const match_table_t tokens = { {Opt_umask, "umask=%o"}, {Opt_dmask, "dmask=%o"}, {Opt_fmask, "fmask=%o"}, + {Opt_err, NULL}, }; static int parse_options(char *options, struct omfs_sb_info *sbi) From 3a281f946640542a7a7372f436e101ee1fbc4c97 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Thu, 28 May 2015 15:44:32 -0700 Subject: [PATCH 314/337] omfs: set error return when d_make_root() fails A static checker found the following issue in the error path for omfs_fill_super: fs/omfs/inode.c:552 omfs_fill_super() warn: missing error code here? 'd_make_root()' failed. 'ret' = '0' Fix by returning -ENOMEM in this case. Signed-off-by: Bob Copeland Reported-by: Dan Carpenter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/omfs/inode.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/omfs/inode.c b/fs/omfs/inode.c index 70d4191cf33d..6ce542c11f98 100644 --- a/fs/omfs/inode.c +++ b/fs/omfs/inode.c @@ -549,8 +549,10 @@ static int omfs_fill_super(struct super_block *sb, void *data, int silent) } sb->s_root = d_make_root(root); - if (!sb->s_root) + if (!sb->s_root) { + ret = -ENOMEM; goto out_brelse_bh2; + } printk(KERN_DEBUG "omfs: Mounted volume %s\n", omfs_rb->r_name); ret = 0; From c0345ee57d461343586b5e1e2f9c3c3766d07fe6 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Thu, 28 May 2015 15:44:35 -0700 Subject: [PATCH 315/337] omfs: fix sign confusion for bitmap loop counter The count variable is used to iterate down to (below) zero from the size of the bitmap and handle the one-filling the remainder of the last partial bitmap block. The loop conditional expects count to be signed in order to detect when the final block is processed, after which count goes negative. Unfortunately, a recent change made this unsigned along with some other related fields. The result of is this is that during mount, omfs_get_imap will overrun the bitmap array and corrupt memory unless number of blocks happens to be a multiple of 8 * blocksize. Fix by changing count back to signed: it is guaranteed to fit in an s32 without overflow due to an enforced limit on the number of blocks in the filesystem. Signed-off-by: Bob Copeland Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/omfs/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/omfs/inode.c b/fs/omfs/inode.c index 6ce542c11f98..3d935c81789a 100644 --- a/fs/omfs/inode.c +++ b/fs/omfs/inode.c @@ -306,7 +306,8 @@ static const struct super_operations omfs_sops = { */ static int omfs_get_imap(struct super_block *sb) { - unsigned int bitmap_size, count, array_size; + unsigned int bitmap_size, array_size; + int count; struct omfs_sb_info *sbi = OMFS_SB(sb); struct buffer_head *bh; unsigned long **ptr; From 5a6b2b36a8249ec9dfb2a714acadad86d9cc0aee Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Thu, 28 May 2015 15:44:37 -0700 Subject: [PATCH 316/337] omfs: fix potential integer overflow in allocator Both 'i' and 'bits_per_entry' are signed integers but the result is a u64 block number. Cast i to u64 to avoid truncation on 32-bit targets. Found by Coverity (CID 200679). Signed-off-by: Bob Copeland Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/omfs/bitmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/omfs/bitmap.c b/fs/omfs/bitmap.c index 082234581d05..83f4e76511c2 100644 --- a/fs/omfs/bitmap.c +++ b/fs/omfs/bitmap.c @@ -159,7 +159,7 @@ int omfs_allocate_range(struct super_block *sb, goto out; found: - *return_block = i * bits_per_entry + bit; + *return_block = (u64) i * bits_per_entry + bit; *return_size = run; ret = set_run(sb, i, bits_per_entry, bit, run, 1); From ca3f172c197b5fa6b2693f5f93d4928a1420fb07 Mon Sep 17 00:00:00 2001 From: Adrien Schildknecht Date: Thu, 28 May 2015 15:44:40 -0700 Subject: [PATCH 317/337] scripts/gdb: fix lx-lsmod refcnt Commit 2f35c41f58a9 ("module: Replace module_ref with atomic_t refcnt") changes the way refcnt is handled but did not update the gdb script to use the new variable. Since refcnt is not per-cpu anymore, we can directly read its value. Signed-off-by: Adrien Schildknecht Reviewed-by: Jan Kiszka Cc: Pantelis Koukousoulas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/gdb/linux/modules.py | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/scripts/gdb/linux/modules.py b/scripts/gdb/linux/modules.py index a1504c4f1900..25db8cff44a2 100644 --- a/scripts/gdb/linux/modules.py +++ b/scripts/gdb/linux/modules.py @@ -73,18 +73,11 @@ class LxLsmod(gdb.Command): " " if utils.get_long_type().sizeof == 8 else "")) for module in module_list(): - ref = 0 - module_refptr = module['refptr'] - for cpu in cpus.cpu_list("cpu_possible_mask"): - refptr = cpus.per_cpu(module_refptr, cpu) - ref += refptr['incs'] - ref -= refptr['decs'] - gdb.write("{address} {name:<19} {size:>8} {ref}".format( address=str(module['module_core']).split()[0], name=module['name'].string(), size=str(module['core_size']), - ref=str(ref))) + ref=str(module['refcnt']['counter']))) source_list = module['source_list'] t = self._module_use_type.get_type().pointer() From 2159184ea01e4ae7d15f2017e296d4bc82d5aeb0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 28 May 2015 23:09:19 -0400 Subject: [PATCH 318/337] d_walk() might skip too much when we find that a child has died while we'd been trying to ascend, we should go into the first live sibling itself, rather than its sibling. Off-by-one in question had been introduced in "deal with deadlock in d_walk()" and the fix needs to be backported to all branches this one has been backported to. Cc: stable@vger.kernel.org # 3.2 and later Signed-off-by: Al Viro --- fs/dcache.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/dcache.c b/fs/dcache.c index 656ce522a218..37b5afdaf698 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -1239,13 +1239,13 @@ ascend: /* might go back up the wrong parent if we have had a rename. */ if (need_seqretry(&rename_lock, seq)) goto rename_retry; - next = child->d_child.next; - while (unlikely(child->d_flags & DCACHE_DENTRY_KILLED)) { + /* go into the first sibling still alive */ + do { + next = child->d_child.next; if (next == &this_parent->d_subdirs) goto ascend; child = list_entry(next, struct dentry, d_child); - next = next->next; - } + } while (unlikely(child->d_flags & DCACHE_DENTRY_KILLED)); rcu_read_unlock(); goto resume; } From b47eee2e0a7de623c24dbcaf303c3bf2b5155455 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 29 May 2015 09:43:29 +0200 Subject: [PATCH 319/337] ALSA: hda - Fix lost sound due to stream_pm ops cleanup The commit [49fb18972581: ALSA: hda - Set stream_pm ops automatically by generic parser] resulted in regressions on some Realtek and VIA codecs because these drivers set patch_ops after calling the generic parser, thus stream_pm got cleared to NULL again. I haven't noticed since I tested with IDT codec. Restore (partial revert) the stream_pm ops for them to fix the regression. Fixes: 49fb18972581 ('ALSA: hda - Set stream_pm ops automatically by generic parser') Reported-by: Jeremiah Mahler Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + sound/pci/hda/patch_via.c | 1 + 2 files changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index ea3af38eee58..464168426465 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5729,6 +5729,7 @@ static int patch_alc269(struct hda_codec *codec) set_beep_amp(spec, spec->gen.mixer_nid, 0x04, HDA_INPUT); codec->patch_ops = alc_patch_ops; + codec->patch_ops.stream_pm = snd_hda_gen_stream_pm; #ifdef CONFIG_PM codec->patch_ops.suspend = alc269_suspend; codec->patch_ops.resume = alc269_resume; diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index 742087ef378f..31a95cca015d 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -472,6 +472,7 @@ static const struct hda_codec_ops via_patch_ops = { .init = via_init, .free = via_free, .unsol_event = snd_hda_jack_unsol_event, + .stream_pm = snd_hda_gen_stream_pm, #ifdef CONFIG_PM .suspend = via_suspend, .check_power_status = via_check_power_status, From 5530c84f62b49a2e9f8c11a079d00f85ea20bb09 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 26 May 2015 12:58:37 +0200 Subject: [PATCH 320/337] ARM: multi_v7_defconfig: Replace CONFIG_USB_ISP1760_HCD by CONFIG_USB_ISP1760 Since commit 100832abf065bc18 ("usb: isp1760: Make HCD support optional"), CONFIG_USB_ISP1760_HCD is automatically selected when needed. Enabling that option in the defconfig is now a no-op, and no longer enables ISP1760 HCD support. Re-enable the ISP1760 driver in the defconfig by enabling USB_ISP1760_HOST_ROLE instead. Signed-off-by: Geert Uytterhoeven Signed-off-by: Arnd Bergmann --- arch/arm/configs/multi_v7_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 0ca4a3eaf65d..fbbb1915c6a9 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -429,7 +429,7 @@ CONFIG_USB_EHCI_EXYNOS=y CONFIG_USB_EHCI_TEGRA=y CONFIG_USB_EHCI_HCD_STI=y CONFIG_USB_EHCI_HCD_PLATFORM=y -CONFIG_USB_ISP1760_HCD=y +CONFIG_USB_ISP1760=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_STI=y CONFIG_USB_OHCI_HCD_PLATFORM=y From e5d8de32cc02a259e1a237ab57cba00f2930fa6a Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Thu, 28 May 2015 15:12:52 -0400 Subject: [PATCH 321/337] dm: fix false warning in free_rq_clone() for unmapped requests When stacking request-based dm device on non blk-mq device and device-mapper target could not map the request (error target is used, multipath target with all paths down, etc), the WARN_ON_ONCE() in free_rq_clone() will trigger when it shouldn't. The warning was added by commit aa6df8d ("dm: fix free_rq_clone() NULL pointer when requeueing unmapped request"). But free_rq_clone() with clone->q == NULL is valid usage for the case where dm_kill_unmapped_request() initiates request cleanup. Fix this false warning by just removing the WARN_ON -- it only generated false positives and was never useful in catching the intended case (completing clone request not being mapped e.g. clone->q being NULL). Fixes: aa6df8d ("dm: fix free_rq_clone() NULL pointer when requeueing unmapped request") Reported-by: Bart Van Assche Reported-by: Jun'ichi Nomura Signed-off-by: Mike Snitzer --- drivers/md/dm.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 1badfb250a18..e24069aaeb18 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1082,13 +1082,11 @@ static void rq_completed(struct mapped_device *md, int rw, bool run_queue) dm_put(md); } -static void free_rq_clone(struct request *clone, bool must_be_mapped) +static void free_rq_clone(struct request *clone) { struct dm_rq_target_io *tio = clone->end_io_data; struct mapped_device *md = tio->md; - WARN_ON_ONCE(must_be_mapped && !clone->q); - blk_rq_unprep_clone(clone); if (md->type == DM_TYPE_MQ_REQUEST_BASED) @@ -1132,7 +1130,7 @@ static void dm_end_request(struct request *clone, int error) rq->sense_len = clone->sense_len; } - free_rq_clone(clone, true); + free_rq_clone(clone); if (!rq->q->mq_ops) blk_end_request_all(rq, error); else @@ -1151,7 +1149,7 @@ static void dm_unprep_request(struct request *rq) } if (clone) - free_rq_clone(clone, false); + free_rq_clone(clone); } /* From 15b94a690470038aa08247eedbebbe7e2218d5ee Mon Sep 17 00:00:00 2001 From: Junichi Nomura Date: Fri, 29 May 2015 08:51:03 +0000 Subject: [PATCH 322/337] dm: fix reload failure of 0 path multipath mapping on blk-mq devices dm-multipath accepts 0 path mapping. # echo '0 2097152 multipath 0 0 0 0' | dmsetup create newdev Such a mapping can be used to release underlying devices while still holding requests in its queue until working paths come back. However, once the multipath device is created over blk-mq devices, it rejects reloading of 0 path mapping: # echo '0 2097152 multipath 0 0 1 1 queue-length 0 1 1 /dev/sda 1' \ | dmsetup create mpath1 # echo '0 2097152 multipath 0 0 0 0' | dmsetup load mpath1 device-mapper: reload ioctl on mpath1 failed: Invalid argument Command failed With following kernel message: device-mapper: ioctl: can't change device type after initial table load. DM tries to inherit the current table type using dm_table_set_type() but it doesn't work as expected because of unnecessary check about whether the target type is hybrid or not. Hybrid type is for targets that work as either request-based or bio-based and not required for blk-mq or non blk-mq checking. Fixes: 65803c205983 ("dm table: train hybrid target type detection to select blk-mq if appropriate") Signed-off-by: Jun'ichi Nomura Signed-off-by: Mike Snitzer --- drivers/md/dm-table.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index d9b00b8565c6..16ba55ad7089 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -820,6 +820,12 @@ void dm_consume_args(struct dm_arg_set *as, unsigned num_args) } EXPORT_SYMBOL(dm_consume_args); +static bool __table_type_request_based(unsigned table_type) +{ + return (table_type == DM_TYPE_REQUEST_BASED || + table_type == DM_TYPE_MQ_REQUEST_BASED); +} + static int dm_table_set_type(struct dm_table *t) { unsigned i; @@ -852,8 +858,7 @@ static int dm_table_set_type(struct dm_table *t) * Determine the type from the live device. * Default to bio-based if device is new. */ - if (live_md_type == DM_TYPE_REQUEST_BASED || - live_md_type == DM_TYPE_MQ_REQUEST_BASED) + if (__table_type_request_based(live_md_type)) request_based = 1; else bio_based = 1; @@ -903,7 +908,7 @@ static int dm_table_set_type(struct dm_table *t) } t->type = DM_TYPE_MQ_REQUEST_BASED; - } else if (hybrid && list_empty(devices) && live_md_type != DM_TYPE_NONE) { + } else if (list_empty(devices) && __table_type_request_based(live_md_type)) { /* inherit live MD type */ t->type = live_md_type; @@ -925,10 +930,7 @@ struct target_type *dm_table_get_immutable_target_type(struct dm_table *t) bool dm_table_request_based(struct dm_table *t) { - unsigned table_type = dm_table_get_type(t); - - return (table_type == DM_TYPE_REQUEST_BASED || - table_type == DM_TYPE_MQ_REQUEST_BASED); + return __table_type_request_based(dm_table_get_type(t)); } bool dm_table_mq_request_based(struct dm_table *t) From 1c220c69ce0dcc0f234a9f263ad9c0864f971852 Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Fri, 29 May 2015 14:52:51 +0100 Subject: [PATCH 323/337] dm: fix casting bug in dm_merge_bvec() dm_merge_bvec() was originally added in f6fccb ("dm: introduce merge_bvec_fn"). In that commit a value in sectors is converted to bytes using << 9, and then assigned to an int. This code made assumptions about the value of BIO_MAX_SECTORS. A later commit 148e51 ("dm: improve documentation and code clarity in dm_merge_bvec") was meant to have no functional change but it removed the use of BIO_MAX_SECTORS in favor of using queue_max_sectors(). At this point the cast from sector_t to int resulted in a zero value. The fallout being dm_merge_bvec() would only allow a single page to be added to a bio. This interim fix is minimal for the benefit of stable@ because the more comprehensive cleanup of passing a sector_t to all DM targets' merge function will impact quite a few DM targets. Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org # 3.19+ --- drivers/md/dm.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index e24069aaeb18..2caf492890d6 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1723,8 +1723,7 @@ static int dm_merge_bvec(struct request_queue *q, struct mapped_device *md = q->queuedata; struct dm_table *map = dm_get_live_table_fast(md); struct dm_target *ti; - sector_t max_sectors; - int max_size = 0; + sector_t max_sectors, max_size = 0; if (unlikely(!map)) goto out; @@ -1739,8 +1738,16 @@ static int dm_merge_bvec(struct request_queue *q, max_sectors = min(max_io_len(bvm->bi_sector, ti), (sector_t) queue_max_sectors(q)); max_size = (max_sectors << SECTOR_SHIFT) - bvm->bi_size; - if (unlikely(max_size < 0)) /* this shouldn't _ever_ happen */ - max_size = 0; + + /* + * FIXME: this stop-gap fix _must_ be cleaned up (by passing a sector_t + * to the targets' merge function since it holds sectors not bytes). + * Just doing this as an interim fix for stable@ because the more + * comprehensive cleanup of switching to sector_t will impact every + * DM target that implements a ->merge hook. + */ + if (max_size > INT_MAX) + max_size = INT_MAX; /* * merge_bvec_fn() returns number of bytes @@ -1748,7 +1755,7 @@ static int dm_merge_bvec(struct request_queue *q, * max is precomputed maximal io size */ if (max_size && ti->type->merge) - max_size = ti->type->merge(ti, bvm, biovec, max_size); + max_size = ti->type->merge(ti, bvm, biovec, (int) max_size); /* * If the target doesn't support merge method and some of the devices * provided their merge_bvec method (we know this by looking for the From 556b6629c10c65cee42fa893681ffdd653d097c4 Mon Sep 17 00:00:00 2001 From: Laurent Fasnacht Date: Wed, 27 May 2015 19:50:00 +0200 Subject: [PATCH 324/337] MIPS: ath79: fix build problem if CONFIG_BLK_DEV_INITRD is not set initrd_start is defined in init/do_mounts_initrd.c, which is only included in kernel if CONFIG_BLK_DEV_INITRD=y. Signed-off-by: Laurent Fasnacht Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10198/ Signed-off-by: Ralf Baechle --- arch/mips/ath79/prom.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/mips/ath79/prom.c b/arch/mips/ath79/prom.c index e1fe63051136..597899ad5438 100644 --- a/arch/mips/ath79/prom.c +++ b/arch/mips/ath79/prom.c @@ -1,6 +1,7 @@ /* * Atheros AR71XX/AR724X/AR913X specific prom routines * + * Copyright (C) 2015 Laurent Fasnacht * Copyright (C) 2008-2010 Gabor Juhos * Copyright (C) 2008 Imre Kaloz * @@ -25,12 +26,14 @@ void __init prom_init(void) { fw_init_cmdline(); +#ifdef CONFIG_BLK_DEV_INITRD /* Read the initrd address from the firmware environment */ initrd_start = fw_getenvl("initrd_start"); if (initrd_start) { initrd_start = KSEG0ADDR(initrd_start); initrd_end = initrd_start + fw_getenvl("initrd_size"); } +#endif } void __init prom_free_prom_memory(void) From 57b41758230b567218cb5bc3da9068aabc496fc9 Mon Sep 17 00:00:00 2001 From: Petri Gynther Date: Tue, 26 May 2015 23:25:08 -0700 Subject: [PATCH 325/337] MIPS: BMIPS: Fix bmips_wr_vec() bmips_wr_vec() copies exception vector code from start to dst. The call to dma_cache_wback() needs to flush (end-start) bytes, starting at dst, from write-back cache to memory. Signed-off-by: Petri Gynther Acked-by: Florian Fainelli Reviewed-by: Kevin Cernekee Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10193/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/smp-bmips.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c index fd528d7ea278..336708ae5c5b 100644 --- a/arch/mips/kernel/smp-bmips.c +++ b/arch/mips/kernel/smp-bmips.c @@ -444,7 +444,7 @@ struct plat_smp_ops bmips5000_smp_ops = { static void bmips_wr_vec(unsigned long dst, char *start, char *end) { memcpy((void *)dst, start, end - start); - dma_cache_wback((unsigned long)start, end - start); + dma_cache_wback(dst, end - start); local_flush_icache_range(dst, dst + (end - start)); instruction_hazard(); } From c4fca4fdea940bda2cff6b844cda6af8ef1c79cc Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Thu, 28 May 2015 17:46:49 +0100 Subject: [PATCH 326/337] MIPS: strnlen_user.S: Fix a CPU_DADDI_WORKAROUNDS regression Correct a regression introduced with 8453eebd [MIPS: Fix strnlen_user() return value in case of overlong strings.] causing assembler warnings and broken code generated in __strnlen_kernel_nocheck_asm: arch/mips/lib/strnlen_user.S: Assembler messages: arch/mips/lib/strnlen_user.S:64: Warning: Macro instruction expanded into multiple instructions in a branch delay slot with the CPU_DADDI_WORKAROUNDS option set, resulting in the function looping indefinitely upon mounting NFS root. Use conditional assembly to avoid a microMIPS code size regression. Using $at unconditionally would cause such a regression as there are no 16-bit instruction encodings available for ALU operations using this register. Using $v1 unconditionally would produce short microMIPS encodings, but would prevent this register from being used across calls to this function. The extra LI operation introduced is free, replacing a NOP originally scheduled into the delay slot of the branch that follows. Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10205/ Signed-off-by: Ralf Baechle --- arch/mips/lib/strnlen_user.S | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/arch/mips/lib/strnlen_user.S b/arch/mips/lib/strnlen_user.S index 7d12c0dded3d..77e64942f004 100644 --- a/arch/mips/lib/strnlen_user.S +++ b/arch/mips/lib/strnlen_user.S @@ -34,7 +34,12 @@ LEAF(__strnlen_\func\()_asm) FEXPORT(__strnlen_\func\()_nocheck_asm) move v0, a0 PTR_ADDU a1, a0 # stop pointer -1: beq v0, a1, 1f # limit reached? +1: +#ifdef CONFIG_CPU_DADDI_WORKAROUNDS + .set noat + li AT, 1 +#endif + beq v0, a1, 1f # limit reached? .ifeqs "\func", "kernel" EX(lb, t0, (v0), .Lfault\@) .else @@ -42,7 +47,13 @@ FEXPORT(__strnlen_\func\()_nocheck_asm) .endif .set noreorder bnez t0, 1b -1: PTR_ADDIU v0, 1 +1: +#ifndef CONFIG_CPU_DADDI_WORKAROUNDS + PTR_ADDIU v0, 1 +#else + PTR_ADDU v0, AT + .set at +#endif .set reorder PTR_SUBU v0, a0 jr ra From 9aecac04d8d89e730ae362a748113b19c06a9d39 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 27 May 2015 16:11:48 -0700 Subject: [PATCH 327/337] hwmon: (tmp401) Do not auto-detect chip on I2C address 0x37 I2C address 0x37 may be used by EEPROMs, which can result in false positives. Do not attempt to detect a chip at this address. Reviewed-by: Jean Delvare Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Guenter Roeck --- Documentation/hwmon/tmp401 | 2 +- drivers/hwmon/tmp401.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/hwmon/tmp401 b/Documentation/hwmon/tmp401 index 8eb88e974055..711f75e189eb 100644 --- a/Documentation/hwmon/tmp401 +++ b/Documentation/hwmon/tmp401 @@ -20,7 +20,7 @@ Supported chips: Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp432.html * Texas Instruments TMP435 Prefix: 'tmp435' - Addresses scanned: I2C 0x37, 0x48 - 0x4f + Addresses scanned: I2C 0x48 - 0x4f Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp435.html Authors: diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c index 99664ebc738d..ccf4cffe0ee1 100644 --- a/drivers/hwmon/tmp401.c +++ b/drivers/hwmon/tmp401.c @@ -44,7 +44,7 @@ #include /* Addresses to scan */ -static const unsigned short normal_i2c[] = { 0x37, 0x48, 0x49, 0x4a, 0x4c, 0x4d, +static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; enum chips { tmp401, tmp411, tmp431, tmp432, tmp435 }; From 1b63bf617206ff35b93c57c67bbe067ac735a85a Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 28 May 2015 09:08:09 -0700 Subject: [PATCH 328/337] hwmon: (nct6775) Add missing sysfs attribute initialization The following error message is seen when loading the nct6775 driver with DEBUG_LOCK_ALLOC enabled. BUG: key ffff88040b2f0030 not in .data! ------------[ cut here ]------------ WARNING: CPU: 0 PID: 186 at kernel/locking/lockdep.c:2988 lockdep_init_map+0x469/0x630() DEBUG_LOCKS_WARN_ON(1) Caused by a missing call to sysfs_attr_init() when initializing sysfs attributes. Reported-by: Alexey Orishko Reviewed-by: Jean Delvare Cc: stable@vger.kernel.org # v3.12+ Signed-off-by: Guenter Roeck --- drivers/hwmon/nct6775.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c index 4fcb48103299..bd1c99deac71 100644 --- a/drivers/hwmon/nct6775.c +++ b/drivers/hwmon/nct6775.c @@ -995,6 +995,7 @@ nct6775_create_attr_group(struct device *dev, struct sensor_template_group *tg, (*t)->dev_attr.attr.name, tg->base + i); if ((*t)->s2) { a2 = &su->u.a2; + sysfs_attr_init(&a2->dev_attr.attr); a2->dev_attr.attr.name = su->name; a2->nr = (*t)->u.s.nr + i; a2->index = (*t)->u.s.index; @@ -1005,6 +1006,7 @@ nct6775_create_attr_group(struct device *dev, struct sensor_template_group *tg, *attrs = &a2->dev_attr.attr; } else { a = &su->u.a1; + sysfs_attr_init(&a->dev_attr.attr); a->dev_attr.attr.name = su->name; a->index = (*t)->u.index + i; a->dev_attr.attr.mode = From c7bd6dc320b85445b6b36a0aff41f929210027c7 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 28 May 2015 09:12:23 -0700 Subject: [PATCH 329/337] hwmon: (nct6683) Add missing sysfs attribute initialization The following error message is seen when loading the nct6683 driver with DEBUG_LOCK_ALLOC enabled. BUG: key ffff88040b2f0030 not in .data! ------------[ cut here ]------------ WARNING: CPU: 0 PID: 186 at kernel/locking/lockdep.c:2988 lockdep_init_map+0x469/0x630() DEBUG_LOCKS_WARN_ON(1) Caused by a missing call to sysfs_attr_init() when initializing sysfs attributes. Reported-by: Alexey Orishko Reviewed-by: Jean Delvare Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Guenter Roeck --- drivers/hwmon/nct6683.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hwmon/nct6683.c b/drivers/hwmon/nct6683.c index f3830db02d46..37f01702d081 100644 --- a/drivers/hwmon/nct6683.c +++ b/drivers/hwmon/nct6683.c @@ -439,6 +439,7 @@ nct6683_create_attr_group(struct device *dev, struct sensor_template_group *tg, (*t)->dev_attr.attr.name, tg->base + i); if ((*t)->s2) { a2 = &su->u.a2; + sysfs_attr_init(&a2->dev_attr.attr); a2->dev_attr.attr.name = su->name; a2->nr = (*t)->u.s.nr + i; a2->index = (*t)->u.s.index; @@ -449,6 +450,7 @@ nct6683_create_attr_group(struct device *dev, struct sensor_template_group *tg, *attrs = &a2->dev_attr.attr; } else { a = &su->u.a1; + sysfs_attr_init(&a->dev_attr.attr); a->dev_attr.attr.name = su->name; a->index = (*t)->u.index + i; a->dev_attr.attr.mode = From d588cf8f618d7b316743a0bc99fede20f7a01bb7 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sun, 3 May 2015 08:50:52 +0200 Subject: [PATCH 330/337] target: Fix se_tpg_tfo->tf_subsys regression + remove tf_subsystem There is just one configfs subsystem in the target code, so we might as well add two helpers to reference / unreference it from the core code instead of passing pointers to it around. This fixes a regression introduced for v4.1-rc1 with commit 9ac8928e6, where configfs_depend_item() callers using se_tpg_tfo->tf_subsys would fail, because the assignment from the original target_core_subsystem[] is no longer happening at target_register_template() time. (Fix target_core_exit_configfs pointer dereference - Sagi) Signed-off-by: Christoph Hellwig Reported-by: Himanshu Madhani Signed-off-by: Nicholas Bellinger --- drivers/scsi/qla2xxx/tcm_qla2xxx.c | 6 ++--- drivers/target/target_core_configfs.c | 30 ++++++++++++------------- drivers/target/target_core_internal.h | 3 --- drivers/target/target_core_pr.c | 32 ++++++--------------------- drivers/target/target_core_xcopy.c | 15 +++++-------- drivers/vhost/scsi.c | 6 ++--- include/target/target_core_configfs.h | 2 -- include/target/target_core_fabric.h | 4 +++- 8 files changed, 34 insertions(+), 64 deletions(-) diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index 68c2002e78bf..5c9e680aa375 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -1020,8 +1020,7 @@ static void tcm_qla2xxx_depend_tpg(struct work_struct *work) struct se_portal_group *se_tpg = &base_tpg->se_tpg; struct scsi_qla_host *base_vha = base_tpg->lport->qla_vha; - if (!configfs_depend_item(se_tpg->se_tpg_tfo->tf_subsys, - &se_tpg->tpg_group.cg_item)) { + if (!target_depend_item(&se_tpg->tpg_group.cg_item)) { atomic_set(&base_tpg->lport_tpg_enabled, 1); qlt_enable_vha(base_vha); } @@ -1037,8 +1036,7 @@ static void tcm_qla2xxx_undepend_tpg(struct work_struct *work) if (!qlt_stop_phase1(base_vha->vha_tgt.qla_tgt)) { atomic_set(&base_tpg->lport_tpg_enabled, 0); - configfs_undepend_item(se_tpg->se_tpg_tfo->tf_subsys, - &se_tpg->tpg_group.cg_item); + target_undepend_item(&se_tpg->tpg_group.cg_item); } complete(&base_tpg->tpg_base_comp); } diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c index ddaf76a4ac2a..1580077971f8 100644 --- a/drivers/target/target_core_configfs.c +++ b/drivers/target/target_core_configfs.c @@ -212,10 +212,6 @@ static struct config_group *target_core_register_fabric( pr_debug("Target_Core_ConfigFS: REGISTER -> Allocated Fabric:" " %s\n", tf->tf_group.cg_item.ci_name); - /* - * Setup tf_ops.tf_subsys pointer for usage with configfs_depend_item() - */ - tf->tf_ops.tf_subsys = tf->tf_subsys; tf->tf_fabric = &tf->tf_group.cg_item; pr_debug("Target_Core_ConfigFS: REGISTER -> Set tf->tf_fabric" " for %s\n", name); @@ -291,10 +287,17 @@ static struct configfs_subsystem target_core_fabrics = { }, }; -struct configfs_subsystem *target_core_subsystem[] = { - &target_core_fabrics, - NULL, -}; +int target_depend_item(struct config_item *item) +{ + return configfs_depend_item(&target_core_fabrics, item); +} +EXPORT_SYMBOL(target_depend_item); + +void target_undepend_item(struct config_item *item) +{ + return configfs_undepend_item(&target_core_fabrics, item); +} +EXPORT_SYMBOL(target_undepend_item); /*############################################################################## // Start functions called by external Target Fabrics Modules @@ -467,7 +470,6 @@ int target_register_template(const struct target_core_fabric_ops *fo) * struct target_fabric_configfs->tf_cit_tmpl */ tf->tf_module = fo->module; - tf->tf_subsys = target_core_subsystem[0]; snprintf(tf->tf_name, TARGET_FABRIC_NAME_SIZE, "%s", fo->name); tf->tf_ops = *fo; @@ -2870,7 +2872,7 @@ static int __init target_core_init_configfs(void) { struct config_group *target_cg, *hba_cg = NULL, *alua_cg = NULL; struct config_group *lu_gp_cg = NULL; - struct configfs_subsystem *subsys; + struct configfs_subsystem *subsys = &target_core_fabrics; struct t10_alua_lu_gp *lu_gp; int ret; @@ -2878,7 +2880,6 @@ static int __init target_core_init_configfs(void) " Engine: %s on %s/%s on "UTS_RELEASE"\n", TARGET_CORE_VERSION, utsname()->sysname, utsname()->machine); - subsys = target_core_subsystem[0]; config_group_init(&subsys->su_group); mutex_init(&subsys->su_mutex); @@ -3008,13 +3009,10 @@ out_global: static void __exit target_core_exit_configfs(void) { - struct configfs_subsystem *subsys; struct config_group *hba_cg, *alua_cg, *lu_gp_cg; struct config_item *item; int i; - subsys = target_core_subsystem[0]; - lu_gp_cg = &alua_lu_gps_group; for (i = 0; lu_gp_cg->default_groups[i]; i++) { item = &lu_gp_cg->default_groups[i]->cg_item; @@ -3045,8 +3043,8 @@ static void __exit target_core_exit_configfs(void) * We expect subsys->su_group.default_groups to be released * by configfs subsystem provider logic.. */ - configfs_unregister_subsystem(subsys); - kfree(subsys->su_group.default_groups); + configfs_unregister_subsystem(&target_core_fabrics); + kfree(target_core_fabrics.su_group.default_groups); core_alua_free_lu_gp(default_lu_gp); default_lu_gp = NULL; diff --git a/drivers/target/target_core_internal.h b/drivers/target/target_core_internal.h index 874a9bc988d8..68bd7f5d9f73 100644 --- a/drivers/target/target_core_internal.h +++ b/drivers/target/target_core_internal.h @@ -4,9 +4,6 @@ /* target_core_alua.c */ extern struct t10_alua_lu_gp *default_lu_gp; -/* target_core_configfs.c */ -extern struct configfs_subsystem *target_core_subsystem[]; - /* target_core_device.c */ extern struct mutex g_device_mutex; extern struct list_head g_device_list; diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index c1aa9655e96e..b7c81acf08d0 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -1367,41 +1367,26 @@ void core_scsi3_free_all_registrations( static int core_scsi3_tpg_depend_item(struct se_portal_group *tpg) { - return configfs_depend_item(tpg->se_tpg_tfo->tf_subsys, - &tpg->tpg_group.cg_item); + return target_depend_item(&tpg->tpg_group.cg_item); } static void core_scsi3_tpg_undepend_item(struct se_portal_group *tpg) { - configfs_undepend_item(tpg->se_tpg_tfo->tf_subsys, - &tpg->tpg_group.cg_item); - + target_undepend_item(&tpg->tpg_group.cg_item); atomic_dec_mb(&tpg->tpg_pr_ref_count); } static int core_scsi3_nodeacl_depend_item(struct se_node_acl *nacl) { - struct se_portal_group *tpg = nacl->se_tpg; - if (nacl->dynamic_node_acl) return 0; - - return configfs_depend_item(tpg->se_tpg_tfo->tf_subsys, - &nacl->acl_group.cg_item); + return target_depend_item(&nacl->acl_group.cg_item); } static void core_scsi3_nodeacl_undepend_item(struct se_node_acl *nacl) { - struct se_portal_group *tpg = nacl->se_tpg; - - if (nacl->dynamic_node_acl) { - atomic_dec_mb(&nacl->acl_pr_ref_count); - return; - } - - configfs_undepend_item(tpg->se_tpg_tfo->tf_subsys, - &nacl->acl_group.cg_item); - + if (!nacl->dynamic_node_acl) + target_undepend_item(&nacl->acl_group.cg_item); atomic_dec_mb(&nacl->acl_pr_ref_count); } @@ -1419,8 +1404,7 @@ static int core_scsi3_lunacl_depend_item(struct se_dev_entry *se_deve) nacl = lun_acl->se_lun_nacl; tpg = nacl->se_tpg; - return configfs_depend_item(tpg->se_tpg_tfo->tf_subsys, - &lun_acl->se_lun_group.cg_item); + return target_depend_item(&lun_acl->se_lun_group.cg_item); } static void core_scsi3_lunacl_undepend_item(struct se_dev_entry *se_deve) @@ -1438,9 +1422,7 @@ static void core_scsi3_lunacl_undepend_item(struct se_dev_entry *se_deve) nacl = lun_acl->se_lun_nacl; tpg = nacl->se_tpg; - configfs_undepend_item(tpg->se_tpg_tfo->tf_subsys, - &lun_acl->se_lun_group.cg_item); - + target_undepend_item(&lun_acl->se_lun_group.cg_item); atomic_dec_mb(&se_deve->pr_ref_count); } diff --git a/drivers/target/target_core_xcopy.c b/drivers/target/target_core_xcopy.c index a600ff15dcfd..8fd680ac941b 100644 --- a/drivers/target/target_core_xcopy.c +++ b/drivers/target/target_core_xcopy.c @@ -58,7 +58,6 @@ static int target_xcopy_locate_se_dev_e4(struct se_cmd *se_cmd, struct xcopy_op bool src) { struct se_device *se_dev; - struct configfs_subsystem *subsys = target_core_subsystem[0]; unsigned char tmp_dev_wwn[XCOPY_NAA_IEEE_REGEX_LEN], *dev_wwn; int rc; @@ -90,8 +89,7 @@ static int target_xcopy_locate_se_dev_e4(struct se_cmd *se_cmd, struct xcopy_op " se_dev\n", xop->src_dev); } - rc = configfs_depend_item(subsys, - &se_dev->dev_group.cg_item); + rc = target_depend_item(&se_dev->dev_group.cg_item); if (rc != 0) { pr_err("configfs_depend_item attempt failed:" " %d for se_dev: %p\n", rc, se_dev); @@ -99,8 +97,8 @@ static int target_xcopy_locate_se_dev_e4(struct se_cmd *se_cmd, struct xcopy_op return rc; } - pr_debug("Called configfs_depend_item for subsys: %p se_dev: %p" - " se_dev->se_dev_group: %p\n", subsys, se_dev, + pr_debug("Called configfs_depend_item for se_dev: %p" + " se_dev->se_dev_group: %p\n", se_dev, &se_dev->dev_group); mutex_unlock(&g_device_mutex); @@ -373,7 +371,6 @@ static int xcopy_pt_get_cmd_state(struct se_cmd *se_cmd) static void xcopy_pt_undepend_remotedev(struct xcopy_op *xop) { - struct configfs_subsystem *subsys = target_core_subsystem[0]; struct se_device *remote_dev; if (xop->op_origin == XCOL_SOURCE_RECV_OP) @@ -381,11 +378,11 @@ static void xcopy_pt_undepend_remotedev(struct xcopy_op *xop) else remote_dev = xop->src_dev; - pr_debug("Calling configfs_undepend_item for subsys: %p" + pr_debug("Calling configfs_undepend_item for" " remote_dev: %p remote_dev->dev_group: %p\n", - subsys, remote_dev, &remote_dev->dev_group.cg_item); + remote_dev, &remote_dev->dev_group.cg_item); - configfs_undepend_item(subsys, &remote_dev->dev_group.cg_item); + target_undepend_item(&remote_dev->dev_group.cg_item); } static void xcopy_pt_release_cmd(struct se_cmd *se_cmd) diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c index 5e19bb53b3a9..ea32b386797f 100644 --- a/drivers/vhost/scsi.c +++ b/drivers/vhost/scsi.c @@ -1409,8 +1409,7 @@ vhost_scsi_set_endpoint(struct vhost_scsi *vs, * dependency now. */ se_tpg = &tpg->se_tpg; - ret = configfs_depend_item(se_tpg->se_tpg_tfo->tf_subsys, - &se_tpg->tpg_group.cg_item); + ret = target_depend_item(&se_tpg->tpg_group.cg_item); if (ret) { pr_warn("configfs_depend_item() failed: %d\n", ret); kfree(vs_tpg); @@ -1513,8 +1512,7 @@ vhost_scsi_clear_endpoint(struct vhost_scsi *vs, * to allow vhost-scsi WWPN se_tpg->tpg_group shutdown to occur. */ se_tpg = &tpg->se_tpg; - configfs_undepend_item(se_tpg->se_tpg_tfo->tf_subsys, - &se_tpg->tpg_group.cg_item); + target_undepend_item(&se_tpg->tpg_group.cg_item); } if (match) { for (i = 0; i < VHOST_SCSI_MAX_VQ; i++) { diff --git a/include/target/target_core_configfs.h b/include/target/target_core_configfs.h index 25bb04c4209e..b99c01170392 100644 --- a/include/target/target_core_configfs.h +++ b/include/target/target_core_configfs.h @@ -40,8 +40,6 @@ struct target_fabric_configfs { struct config_item *tf_fabric; /* Passed from fabric modules */ struct config_item_type *tf_fabric_cit; - /* Pointer to target core subsystem */ - struct configfs_subsystem *tf_subsys; /* Pointer to fabric's struct module */ struct module *tf_module; struct target_core_fabric_ops tf_ops; diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h index 17c7f5ac7ea0..0f4dc3768587 100644 --- a/include/target/target_core_fabric.h +++ b/include/target/target_core_fabric.h @@ -4,7 +4,6 @@ struct target_core_fabric_ops { struct module *module; const char *name; - struct configfs_subsystem *tf_subsys; char *(*get_fabric_name)(void); u8 (*get_fabric_proto_ident)(struct se_portal_group *); char *(*tpg_get_wwn)(struct se_portal_group *); @@ -109,6 +108,9 @@ struct target_core_fabric_ops { int target_register_template(const struct target_core_fabric_ops *fo); void target_unregister_template(const struct target_core_fabric_ops *fo); +int target_depend_item(struct config_item *item); +void target_undepend_item(struct config_item *item); + struct se_session *transport_init_session(enum target_prot_op); int transport_alloc_session_tags(struct se_session *, unsigned int, unsigned int); From 5a7125c64def3b21f8147eca8b54949a60963942 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Fri, 22 May 2015 14:07:44 -0700 Subject: [PATCH 331/337] target/pscsi: Don't leak scsi_host if hba is VIRTUAL_HOST See https://bugzilla.redhat.com/show_bug.cgi?id=1025672 We need to put() the reference to the scsi host that we got in pscsi_configure_device(). In VIRTUAL_HOST mode it is associated with the dev_virt, not the hba_virt. Signed-off-by: Andy Grover Cc: stable@vger.kernel.org # 2.6.38+ Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_pscsi.c | 3 +++ drivers/target/target_core_pscsi.h | 1 + 2 files changed, 4 insertions(+) diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index f6c954c4635f..4073869d2090 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -521,6 +521,7 @@ static int pscsi_configure_device(struct se_device *dev) " pdv_host_id: %d\n", pdv->pdv_host_id); return -EINVAL; } + pdv->pdv_lld_host = sh; } } else { if (phv->phv_mode == PHV_VIRTUAL_HOST_ID) { @@ -603,6 +604,8 @@ static void pscsi_free_device(struct se_device *dev) if ((phv->phv_mode == PHV_LLD_SCSI_HOST_NO) && (phv->phv_lld_host != NULL)) scsi_host_put(phv->phv_lld_host); + else if (pdv->pdv_lld_host) + scsi_host_put(pdv->pdv_lld_host); if ((sd->type == TYPE_DISK) || (sd->type == TYPE_ROM)) scsi_device_put(sd); diff --git a/drivers/target/target_core_pscsi.h b/drivers/target/target_core_pscsi.h index 1bd757dff8ee..820d3052b775 100644 --- a/drivers/target/target_core_pscsi.h +++ b/drivers/target/target_core_pscsi.h @@ -45,6 +45,7 @@ struct pscsi_dev_virt { int pdv_lun_id; struct block_device *pdv_bd; struct scsi_device *pdv_sd; + struct Scsi_Host *pdv_lld_host; } ____cacheline_aligned; typedef enum phv_modes { From cf87edc6022d1fe7efa6b8ce1a99f2ef6a1b27f9 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Tue, 19 May 2015 14:44:38 -0700 Subject: [PATCH 332/337] target/user: Update example code for new ABI requirements We now require that the userspace handler set a bit if the command is not handled. Update calls to tcmu_hdr_get_op for v2. Signed-off-by: Andy Grover Reviewed-by: Ilias Tsitsimpis Signed-off-by: Nicholas Bellinger --- Documentation/target/tcmu-design.txt | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/Documentation/target/tcmu-design.txt b/Documentation/target/tcmu-design.txt index c80bf1ed8981..b495108c433c 100644 --- a/Documentation/target/tcmu-design.txt +++ b/Documentation/target/tcmu-design.txt @@ -324,7 +324,7 @@ int handle_device_events(int fd, void *map) /* Process events from cmd ring until we catch up with cmd_head */ while (ent != (void *)mb + mb->cmdr_off + mb->cmd_head) { - if (tcmu_hdr_get_op(&ent->hdr) == TCMU_OP_CMD) { + if (tcmu_hdr_get_op(ent->hdr.len_op) == TCMU_OP_CMD) { uint8_t *cdb = (void *)mb + ent->req.cdb_off; bool success = true; @@ -339,8 +339,12 @@ int handle_device_events(int fd, void *map) ent->rsp.scsi_status = SCSI_CHECK_CONDITION; } } + else if (tcmu_hdr_get_op(ent->hdr.len_op) != TCMU_OP_PAD) { + /* Tell the kernel we didn't handle unknown opcodes */ + ent->hdr.uflags |= TCMU_UFLAG_UNKNOWN_OP; + } else { - /* Do nothing for PAD entries */ + /* Do nothing for PAD entries except update cmd_tail */ } /* update cmd_tail */ From 9c1cd1b68cd15c81d12a0cf2402129475882b620 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Tue, 19 May 2015 14:44:39 -0700 Subject: [PATCH 333/337] target/user: Only support full command pass-through After much discussion, give up on only passing a subset of SCSI commands to userspace and pass them all. Based on what pscsi is doing, make sure to set SCF_SCSI_DATA_CDB for I/O ops, and define attributes identical to pscsi. Make hw_block_size configurable via dev param. Remove mention of command filtering from tcmu-design.txt. Signed-off-by: Andy Grover Reviewed-by: Ilias Tsitsimpis Signed-off-by: Nicholas Bellinger --- Documentation/target/tcmu-design.txt | 21 +---- drivers/target/target_core_user.c | 126 ++++++++++++++++----------- 2 files changed, 76 insertions(+), 71 deletions(-) diff --git a/Documentation/target/tcmu-design.txt b/Documentation/target/tcmu-design.txt index b495108c433c..263b907517ac 100644 --- a/Documentation/target/tcmu-design.txt +++ b/Documentation/target/tcmu-design.txt @@ -15,8 +15,7 @@ Contents: a) Discovering and configuring TCMU uio devices b) Waiting for events on the device(s) c) Managing the command ring -3) Command filtering -4) A final note +3) A final note TCM Userspace Design @@ -364,24 +363,6 @@ int handle_device_events(int fd, void *map) } -Command filtering ------------------ - -Initial TCMU support is for a filtered commandset. Only IO-related -commands are presented to userspace, and the rest are handled by LIO's -in-kernel command emulation. The commands presented are all versions -of: - -READ -WRITE -WRITE_VERIFY -XDWRITEREAD -WRITE_SAME -COMPARE_AND_WRITE -SYNCHRONIZE_CACHE -UNMAP - - A final note ------------ diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c index 0e0feeaec39c..90e084ea7b92 100644 --- a/drivers/target/target_core_user.c +++ b/drivers/target/target_core_user.c @@ -938,12 +938,13 @@ static void tcmu_free_device(struct se_device *dev) } enum { - Opt_dev_config, Opt_dev_size, Opt_err, + Opt_dev_config, Opt_dev_size, Opt_hw_block_size, Opt_err, }; static match_table_t tokens = { {Opt_dev_config, "dev_config=%s"}, {Opt_dev_size, "dev_size=%u"}, + {Opt_hw_block_size, "hw_block_size=%u"}, {Opt_err, NULL} }; @@ -954,6 +955,7 @@ static ssize_t tcmu_set_configfs_dev_params(struct se_device *dev, char *orig, *ptr, *opts, *arg_p; substring_t args[MAX_OPT_ARGS]; int ret = 0, token; + unsigned long tmp_ul; opts = kstrdup(page, GFP_KERNEL); if (!opts) @@ -986,6 +988,24 @@ static ssize_t tcmu_set_configfs_dev_params(struct se_device *dev, if (ret < 0) pr_err("kstrtoul() failed for dev_size=\n"); break; + case Opt_hw_block_size: + arg_p = match_strdup(&args[0]); + if (!arg_p) { + ret = -ENOMEM; + break; + } + ret = kstrtoul(arg_p, 0, &tmp_ul); + kfree(arg_p); + if (ret < 0) { + pr_err("kstrtoul() failed for hw_block_size=\n"); + break; + } + if (!tmp_ul) { + pr_err("hw_block_size must be nonzero\n"); + break; + } + dev->dev_attrib.hw_block_size = tmp_ul; + break; default: break; } @@ -1015,20 +1035,6 @@ static sector_t tcmu_get_blocks(struct se_device *dev) dev->dev_attrib.block_size); } -static sense_reason_t -tcmu_execute_rw(struct se_cmd *se_cmd, struct scatterlist *sgl, u32 sgl_nents, - enum dma_data_direction data_direction) -{ - int ret; - - ret = tcmu_queue_cmd(se_cmd); - - if (ret != 0) - return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; - else - return TCM_NO_SENSE; -} - static sense_reason_t tcmu_pass_op(struct se_cmd *se_cmd) { @@ -1040,52 +1046,70 @@ tcmu_pass_op(struct se_cmd *se_cmd) return TCM_NO_SENSE; } -static struct sbc_ops tcmu_sbc_ops = { - .execute_rw = tcmu_execute_rw, - .execute_sync_cache = tcmu_pass_op, - .execute_write_same = tcmu_pass_op, - .execute_write_same_unmap = tcmu_pass_op, - .execute_unmap = tcmu_pass_op, -}; - static sense_reason_t tcmu_parse_cdb(struct se_cmd *cmd) { - return sbc_parse_cdb(cmd, &tcmu_sbc_ops); + unsigned char *cdb = cmd->t_task_cdb; + + /* + * For REPORT LUNS we always need to emulate the response, for everything + * else, pass it up. + */ + if (cdb[0] == REPORT_LUNS) { + cmd->execute_cmd = spc_emulate_report_luns; + return TCM_NO_SENSE; + } + + /* Set DATA_CDB flag for ops that should have it */ + switch (cdb[0]) { + case READ_6: + case READ_10: + case READ_12: + case READ_16: + case WRITE_6: + case WRITE_10: + case WRITE_12: + case WRITE_16: + case WRITE_VERIFY: + case WRITE_VERIFY_12: + case 0x8e: /* WRITE_VERIFY_16 */ + case COMPARE_AND_WRITE: + case XDWRITEREAD_10: + cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB; + break; + case VARIABLE_LENGTH_CMD: + switch (get_unaligned_be16(&cdb[8])) { + case READ_32: + case WRITE_32: + case 0x0c: /* WRITE_VERIFY_32 */ + case XDWRITEREAD_32: + cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB; + break; + } + } + + cmd->execute_cmd = tcmu_pass_op; + + return TCM_NO_SENSE; } -DEF_TB_DEFAULT_ATTRIBS(tcmu); +DEF_TB_DEV_ATTRIB_RO(tcmu, hw_pi_prot_type); +TB_DEV_ATTR_RO(tcmu, hw_pi_prot_type); + +DEF_TB_DEV_ATTRIB_RO(tcmu, hw_block_size); +TB_DEV_ATTR_RO(tcmu, hw_block_size); + +DEF_TB_DEV_ATTRIB_RO(tcmu, hw_max_sectors); +TB_DEV_ATTR_RO(tcmu, hw_max_sectors); + +DEF_TB_DEV_ATTRIB_RO(tcmu, hw_queue_depth); +TB_DEV_ATTR_RO(tcmu, hw_queue_depth); static struct configfs_attribute *tcmu_backend_dev_attrs[] = { - &tcmu_dev_attrib_emulate_model_alias.attr, - &tcmu_dev_attrib_emulate_dpo.attr, - &tcmu_dev_attrib_emulate_fua_write.attr, - &tcmu_dev_attrib_emulate_fua_read.attr, - &tcmu_dev_attrib_emulate_write_cache.attr, - &tcmu_dev_attrib_emulate_ua_intlck_ctrl.attr, - &tcmu_dev_attrib_emulate_tas.attr, - &tcmu_dev_attrib_emulate_tpu.attr, - &tcmu_dev_attrib_emulate_tpws.attr, - &tcmu_dev_attrib_emulate_caw.attr, - &tcmu_dev_attrib_emulate_3pc.attr, - &tcmu_dev_attrib_pi_prot_type.attr, &tcmu_dev_attrib_hw_pi_prot_type.attr, - &tcmu_dev_attrib_pi_prot_format.attr, - &tcmu_dev_attrib_enforce_pr_isids.attr, - &tcmu_dev_attrib_is_nonrot.attr, - &tcmu_dev_attrib_emulate_rest_reord.attr, - &tcmu_dev_attrib_force_pr_aptpl.attr, &tcmu_dev_attrib_hw_block_size.attr, - &tcmu_dev_attrib_block_size.attr, &tcmu_dev_attrib_hw_max_sectors.attr, - &tcmu_dev_attrib_optimal_sectors.attr, &tcmu_dev_attrib_hw_queue_depth.attr, - &tcmu_dev_attrib_queue_depth.attr, - &tcmu_dev_attrib_max_unmap_lba_count.attr, - &tcmu_dev_attrib_max_unmap_block_desc_count.attr, - &tcmu_dev_attrib_unmap_granularity.attr, - &tcmu_dev_attrib_unmap_granularity_alignment.attr, - &tcmu_dev_attrib_max_write_same_len.attr, NULL, }; @@ -1094,7 +1118,7 @@ static struct se_subsystem_api tcmu_template = { .inquiry_prod = "USER", .inquiry_rev = TCMU_VERSION, .owner = THIS_MODULE, - .transport_type = TRANSPORT_PLUGIN_VHBA_PDEV, + .transport_type = TRANSPORT_PLUGIN_PHBA_PDEV, .attach_hba = tcmu_attach_hba, .detach_hba = tcmu_detach_hba, .alloc_device = tcmu_alloc_device, From 7bfea53b5c936d706d0bf60ec218fa72cde77121 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Tue, 19 May 2015 14:44:40 -0700 Subject: [PATCH 334/337] target: Move passthrough CDB parsing into a common function Aside from whether they handle BIDI ops or not, parsing of the CDB by kernel and user SCSI passthrough modules should be identical. Move this into a new passthrough_parse_cdb() and call it from tcm-pscsi and tcm-user. Reported-by: Christoph Hellwig Reviewed-by: Ilias Tsitsimpis Signed-off-by: Andy Grover Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_device.c | 74 ++++++++++++++++++++++++++++ drivers/target/target_core_pscsi.c | 53 +------------------- drivers/target/target_core_user.c | 43 +--------------- include/target/target_core_backend.h | 2 + 4 files changed, 78 insertions(+), 94 deletions(-) diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 7faa6aef9a4d..56b20dc54087 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #include @@ -1707,3 +1708,76 @@ void core_dev_release_virtual_lun0(void) target_free_device(g_lun0_dev); core_delete_hba(hba); } + +/* + * Common CDB parsing for kernel and user passthrough. + */ +sense_reason_t +passthrough_parse_cdb(struct se_cmd *cmd, + sense_reason_t (*exec_cmd)(struct se_cmd *cmd)) +{ + unsigned char *cdb = cmd->t_task_cdb; + + /* + * Clear a lun set in the cdb if the initiator talking to use spoke + * and old standards version, as we can't assume the underlying device + * won't choke up on it. + */ + switch (cdb[0]) { + case READ_10: /* SBC - RDProtect */ + case READ_12: /* SBC - RDProtect */ + case READ_16: /* SBC - RDProtect */ + case SEND_DIAGNOSTIC: /* SPC - SELF-TEST Code */ + case VERIFY: /* SBC - VRProtect */ + case VERIFY_16: /* SBC - VRProtect */ + case WRITE_VERIFY: /* SBC - VRProtect */ + case WRITE_VERIFY_12: /* SBC - VRProtect */ + case MAINTENANCE_IN: /* SPC - Parameter Data Format for SA RTPG */ + break; + default: + cdb[1] &= 0x1f; /* clear logical unit number */ + break; + } + + /* + * For REPORT LUNS we always need to emulate the response, for everything + * else, pass it up. + */ + if (cdb[0] == REPORT_LUNS) { + cmd->execute_cmd = spc_emulate_report_luns; + return TCM_NO_SENSE; + } + + /* Set DATA_CDB flag for ops that should have it */ + switch (cdb[0]) { + case READ_6: + case READ_10: + case READ_12: + case READ_16: + case WRITE_6: + case WRITE_10: + case WRITE_12: + case WRITE_16: + case WRITE_VERIFY: + case WRITE_VERIFY_12: + case 0x8e: /* WRITE_VERIFY_16 */ + case COMPARE_AND_WRITE: + case XDWRITEREAD_10: + cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB; + break; + case VARIABLE_LENGTH_CMD: + switch (get_unaligned_be16(&cdb[8])) { + case READ_32: + case WRITE_32: + case 0x0c: /* WRITE_VERIFY_32 */ + case XDWRITEREAD_32: + cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB; + break; + } + } + + cmd->execute_cmd = exec_cmd; + + return TCM_NO_SENSE; +} +EXPORT_SYMBOL(passthrough_parse_cdb); diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index 4073869d2090..53bd0eb57095 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -973,64 +973,13 @@ fail: return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; } -/* - * Clear a lun set in the cdb if the initiator talking to use spoke - * and old standards version, as we can't assume the underlying device - * won't choke up on it. - */ -static inline void pscsi_clear_cdb_lun(unsigned char *cdb) -{ - switch (cdb[0]) { - case READ_10: /* SBC - RDProtect */ - case READ_12: /* SBC - RDProtect */ - case READ_16: /* SBC - RDProtect */ - case SEND_DIAGNOSTIC: /* SPC - SELF-TEST Code */ - case VERIFY: /* SBC - VRProtect */ - case VERIFY_16: /* SBC - VRProtect */ - case WRITE_VERIFY: /* SBC - VRProtect */ - case WRITE_VERIFY_12: /* SBC - VRProtect */ - case MAINTENANCE_IN: /* SPC - Parameter Data Format for SA RTPG */ - break; - default: - cdb[1] &= 0x1f; /* clear logical unit number */ - break; - } -} - static sense_reason_t pscsi_parse_cdb(struct se_cmd *cmd) { - unsigned char *cdb = cmd->t_task_cdb; - if (cmd->se_cmd_flags & SCF_BIDI) return TCM_UNSUPPORTED_SCSI_OPCODE; - pscsi_clear_cdb_lun(cdb); - - /* - * For REPORT LUNS we always need to emulate the response, for everything - * else the default for pSCSI is to pass the command to the underlying - * LLD / physical hardware. - */ - switch (cdb[0]) { - case REPORT_LUNS: - cmd->execute_cmd = spc_emulate_report_luns; - return 0; - case READ_6: - case READ_10: - case READ_12: - case READ_16: - case WRITE_6: - case WRITE_10: - case WRITE_12: - case WRITE_16: - case WRITE_VERIFY: - cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB; - /* FALLTHROUGH*/ - default: - cmd->execute_cmd = pscsi_execute_cmd; - return 0; - } + return passthrough_parse_cdb(cmd, pscsi_execute_cmd); } static sense_reason_t diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c index 90e084ea7b92..2768ea2cfd7a 100644 --- a/drivers/target/target_core_user.c +++ b/drivers/target/target_core_user.c @@ -1049,48 +1049,7 @@ tcmu_pass_op(struct se_cmd *se_cmd) static sense_reason_t tcmu_parse_cdb(struct se_cmd *cmd) { - unsigned char *cdb = cmd->t_task_cdb; - - /* - * For REPORT LUNS we always need to emulate the response, for everything - * else, pass it up. - */ - if (cdb[0] == REPORT_LUNS) { - cmd->execute_cmd = spc_emulate_report_luns; - return TCM_NO_SENSE; - } - - /* Set DATA_CDB flag for ops that should have it */ - switch (cdb[0]) { - case READ_6: - case READ_10: - case READ_12: - case READ_16: - case WRITE_6: - case WRITE_10: - case WRITE_12: - case WRITE_16: - case WRITE_VERIFY: - case WRITE_VERIFY_12: - case 0x8e: /* WRITE_VERIFY_16 */ - case COMPARE_AND_WRITE: - case XDWRITEREAD_10: - cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB; - break; - case VARIABLE_LENGTH_CMD: - switch (get_unaligned_be16(&cdb[8])) { - case READ_32: - case WRITE_32: - case 0x0c: /* WRITE_VERIFY_32 */ - case XDWRITEREAD_32: - cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB; - break; - } - } - - cmd->execute_cmd = tcmu_pass_op; - - return TCM_NO_SENSE; + return passthrough_parse_cdb(cmd, tcmu_pass_op); } DEF_TB_DEV_ATTRIB_RO(tcmu, hw_pi_prot_type); diff --git a/include/target/target_core_backend.h b/include/target/target_core_backend.h index d61be7297b2c..563e11970152 100644 --- a/include/target/target_core_backend.h +++ b/include/target/target_core_backend.h @@ -138,5 +138,7 @@ int se_dev_set_queue_depth(struct se_device *, u32); int se_dev_set_max_sectors(struct se_device *, u32); int se_dev_set_optimal_sectors(struct se_device *, u32); int se_dev_set_block_size(struct se_device *, u32); +sense_reason_t passthrough_parse_cdb(struct se_cmd *cmd, + sense_reason_t (*exec_cmd)(struct se_cmd *cmd)); #endif /* TARGET_CORE_BACKEND_H */ From a3541703ebbf99d499656b15987175f6579b42ac Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Tue, 19 May 2015 14:44:41 -0700 Subject: [PATCH 335/337] target: Use a PASSTHROUGH flag instead of transport_types It seems like we only care if a transport is passthrough or not. Convert transport_type to a flags field and replace TRANSPORT_PLUGIN_* with a flag, TRANSPORT_FLAG_PASSTHROUGH. Signed-off-by: Andy Grover Reviewed-by: Ilias Tsitsimpis Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_alua.c | 4 ++-- drivers/target/target_core_configfs.c | 10 +++++----- drivers/target/target_core_device.c | 4 ++-- drivers/target/target_core_file.c | 1 - drivers/target/target_core_iblock.c | 1 - drivers/target/target_core_pr.c | 2 +- drivers/target/target_core_pscsi.c | 2 +- drivers/target/target_core_rd.c | 1 - drivers/target/target_core_transport.c | 6 +++--- drivers/target/target_core_user.c | 2 +- include/target/target_core_backend.h | 6 ++---- 11 files changed, 17 insertions(+), 22 deletions(-) diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c index 75cbde1f7c5b..4f8d4d459aa4 100644 --- a/drivers/target/target_core_alua.c +++ b/drivers/target/target_core_alua.c @@ -704,7 +704,7 @@ target_alua_state_check(struct se_cmd *cmd) if (dev->se_hba->hba_flags & HBA_FLAGS_INTERNAL_USE) return 0; - if (dev->transport->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV) + if (dev->transport->transport_flags & TRANSPORT_FLAG_PASSTHROUGH) return 0; if (!port) @@ -2377,7 +2377,7 @@ ssize_t core_alua_store_secondary_write_metadata( int core_setup_alua(struct se_device *dev) { - if (dev->transport->transport_type != TRANSPORT_PLUGIN_PHBA_PDEV && + if (!(dev->transport->transport_flags & TRANSPORT_FLAG_PASSTHROUGH) && !(dev->se_hba->hba_flags & HBA_FLAGS_INTERNAL_USE)) { struct t10_alua_lu_gp_member *lu_gp_mem; diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c index 1580077971f8..e7b0430a0575 100644 --- a/drivers/target/target_core_configfs.c +++ b/drivers/target/target_core_configfs.c @@ -811,7 +811,7 @@ static ssize_t target_core_dev_pr_show_attr_res_holder(struct se_device *dev, { int ret; - if (dev->transport->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV) + if (dev->transport->transport_flags & TRANSPORT_FLAG_PASSTHROUGH) return sprintf(page, "Passthrough\n"); spin_lock(&dev->dev_reservation_lock); @@ -962,7 +962,7 @@ SE_DEV_PR_ATTR_RO(res_pr_type); static ssize_t target_core_dev_pr_show_attr_res_type( struct se_device *dev, char *page) { - if (dev->transport->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV) + if (dev->transport->transport_flags & TRANSPORT_FLAG_PASSTHROUGH) return sprintf(page, "SPC_PASSTHROUGH\n"); else if (dev->dev_reservation_flags & DRF_SPC2_RESERVATIONS) return sprintf(page, "SPC2_RESERVATIONS\n"); @@ -975,7 +975,7 @@ SE_DEV_PR_ATTR_RO(res_type); static ssize_t target_core_dev_pr_show_attr_res_aptpl_active( struct se_device *dev, char *page) { - if (dev->transport->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV) + if (dev->transport->transport_flags & TRANSPORT_FLAG_PASSTHROUGH) return 0; return sprintf(page, "APTPL Bit Status: %s\n", @@ -990,7 +990,7 @@ SE_DEV_PR_ATTR_RO(res_aptpl_active); static ssize_t target_core_dev_pr_show_attr_res_aptpl_metadata( struct se_device *dev, char *page) { - if (dev->transport->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV) + if (dev->transport->transport_flags & TRANSPORT_FLAG_PASSTHROUGH) return 0; return sprintf(page, "Ready to process PR APTPL metadata..\n"); @@ -1037,7 +1037,7 @@ static ssize_t target_core_dev_pr_store_attr_res_aptpl_metadata( u16 port_rpti = 0, tpgt = 0; u8 type = 0, scope; - if (dev->transport->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV) + if (dev->transport->transport_flags & TRANSPORT_FLAG_PASSTHROUGH) return 0; if (dev->dev_reservation_flags & DRF_SPC2_RESERVATIONS) return 0; diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 56b20dc54087..ce5f768181ff 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -528,7 +528,7 @@ static void core_export_port( list_add_tail(&port->sep_list, &dev->dev_sep_list); spin_unlock(&dev->se_port_lock); - if (dev->transport->transport_type != TRANSPORT_PLUGIN_PHBA_PDEV && + if (!(dev->transport->transport_flags & TRANSPORT_FLAG_PASSTHROUGH) && !(dev->se_hba->hba_flags & HBA_FLAGS_INTERNAL_USE)) { tg_pt_gp_mem = core_alua_allocate_tg_pt_gp_mem(port); if (IS_ERR(tg_pt_gp_mem) || !tg_pt_gp_mem) { @@ -1604,7 +1604,7 @@ int target_configure_device(struct se_device *dev) * anything virtual (IBLOCK, FILEIO, RAMDISK), but not for TCM/pSCSI * passthrough because this is being provided by the backend LLD. */ - if (dev->transport->transport_type != TRANSPORT_PLUGIN_PHBA_PDEV) { + if (!(dev->transport->transport_flags & TRANSPORT_FLAG_PASSTHROUGH)) { strncpy(&dev->t10_wwn.vendor[0], "LIO-ORG", 8); strncpy(&dev->t10_wwn.model[0], dev->transport->inquiry_prod, 16); diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c index f7e6e51aed36..3f27bfd816d8 100644 --- a/drivers/target/target_core_file.c +++ b/drivers/target/target_core_file.c @@ -958,7 +958,6 @@ static struct se_subsystem_api fileio_template = { .inquiry_prod = "FILEIO", .inquiry_rev = FD_VERSION, .owner = THIS_MODULE, - .transport_type = TRANSPORT_PLUGIN_VHBA_PDEV, .attach_hba = fd_attach_hba, .detach_hba = fd_detach_hba, .alloc_device = fd_alloc_device, diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c index 1b7947c2510f..8c965683789f 100644 --- a/drivers/target/target_core_iblock.c +++ b/drivers/target/target_core_iblock.c @@ -904,7 +904,6 @@ static struct se_subsystem_api iblock_template = { .inquiry_prod = "IBLOCK", .inquiry_rev = IBLOCK_VERSION, .owner = THIS_MODULE, - .transport_type = TRANSPORT_PLUGIN_VHBA_PDEV, .attach_hba = iblock_attach_hba, .detach_hba = iblock_detach_hba, .alloc_device = iblock_alloc_device, diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index b7c81acf08d0..a15411c79ae9 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -4093,7 +4093,7 @@ target_check_reservation(struct se_cmd *cmd) return 0; if (dev->se_hba->hba_flags & HBA_FLAGS_INTERNAL_USE) return 0; - if (dev->transport->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV) + if (dev->transport->transport_flags & TRANSPORT_FLAG_PASSTHROUGH) return 0; spin_lock(&dev->dev_reservation_lock); diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index 53bd0eb57095..ecc5eaef13d6 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -1141,7 +1141,7 @@ static struct configfs_attribute *pscsi_backend_dev_attrs[] = { static struct se_subsystem_api pscsi_template = { .name = "pscsi", .owner = THIS_MODULE, - .transport_type = TRANSPORT_PLUGIN_PHBA_PDEV, + .transport_flags = TRANSPORT_FLAG_PASSTHROUGH, .attach_hba = pscsi_attach_hba, .detach_hba = pscsi_detach_hba, .pmode_enable_hba = pscsi_pmode_enable_hba, diff --git a/drivers/target/target_core_rd.c b/drivers/target/target_core_rd.c index a263bf5fab8d..d16489b6a1a4 100644 --- a/drivers/target/target_core_rd.c +++ b/drivers/target/target_core_rd.c @@ -733,7 +733,6 @@ static struct se_subsystem_api rd_mcp_template = { .name = "rd_mcp", .inquiry_prod = "RAMDISK-MCP", .inquiry_rev = RD_MCP_VERSION, - .transport_type = TRANSPORT_PLUGIN_VHBA_VDEV, .attach_hba = rd_attach_hba, .detach_hba = rd_detach_hba, .alloc_device = rd_alloc_device, diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 90c92f04a586..675f2d9d1f14 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1196,7 +1196,7 @@ transport_check_alloc_task_attr(struct se_cmd *cmd) * Check if SAM Task Attribute emulation is enabled for this * struct se_device storage object */ - if (dev->transport->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV) + if (dev->transport->transport_flags & TRANSPORT_FLAG_PASSTHROUGH) return 0; if (cmd->sam_task_attr == TCM_ACA_TAG) { @@ -1787,7 +1787,7 @@ static bool target_handle_task_attr(struct se_cmd *cmd) { struct se_device *dev = cmd->se_dev; - if (dev->transport->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV) + if (dev->transport->transport_flags & TRANSPORT_FLAG_PASSTHROUGH) return false; /* @@ -1912,7 +1912,7 @@ static void transport_complete_task_attr(struct se_cmd *cmd) { struct se_device *dev = cmd->se_dev; - if (dev->transport->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV) + if (dev->transport->transport_flags & TRANSPORT_FLAG_PASSTHROUGH) return; if (cmd->sam_task_attr == TCM_SIMPLE_TAG) { diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c index 2768ea2cfd7a..07d2996d8c1f 100644 --- a/drivers/target/target_core_user.c +++ b/drivers/target/target_core_user.c @@ -1077,7 +1077,7 @@ static struct se_subsystem_api tcmu_template = { .inquiry_prod = "USER", .inquiry_rev = TCMU_VERSION, .owner = THIS_MODULE, - .transport_type = TRANSPORT_PLUGIN_PHBA_PDEV, + .transport_flags = TRANSPORT_FLAG_PASSTHROUGH, .attach_hba = tcmu_attach_hba, .detach_hba = tcmu_detach_hba, .alloc_device = tcmu_alloc_device, diff --git a/include/target/target_core_backend.h b/include/target/target_core_backend.h index 563e11970152..5f1225706993 100644 --- a/include/target/target_core_backend.h +++ b/include/target/target_core_backend.h @@ -1,9 +1,7 @@ #ifndef TARGET_CORE_BACKEND_H #define TARGET_CORE_BACKEND_H -#define TRANSPORT_PLUGIN_PHBA_PDEV 1 -#define TRANSPORT_PLUGIN_VHBA_PDEV 2 -#define TRANSPORT_PLUGIN_VHBA_VDEV 3 +#define TRANSPORT_FLAG_PASSTHROUGH 1 struct target_backend_cits { struct config_item_type tb_dev_cit; @@ -22,7 +20,7 @@ struct se_subsystem_api { char inquiry_rev[4]; struct module *owner; - u8 transport_type; + u8 transport_flags; int (*attach_hba)(struct se_hba *, u32); void (*detach_hba)(struct se_hba *); From b2feda4feb1b0ea74c0916b4a35b038bbfef9c82 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 29 May 2015 23:12:10 -0700 Subject: [PATCH 336/337] iser-target: Fix error path in isert_create_pi_ctx() We don't assign pi_ctx to desc->pi_ctx until we're certain to succeed in the function. That means the cleanup path should use the local pi_ctx variable, not desc->pi_ctx. This was detected by Coverity (CID 1260062). Signed-off-by: Roland Dreier Signed-off-by: Nicholas Bellinger --- drivers/infiniband/ulp/isert/ib_isert.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c index 327529ee85eb..3f40319a55da 100644 --- a/drivers/infiniband/ulp/isert/ib_isert.c +++ b/drivers/infiniband/ulp/isert/ib_isert.c @@ -547,11 +547,11 @@ isert_create_pi_ctx(struct fast_reg_descriptor *desc, return 0; err_prot_mr: - ib_dereg_mr(desc->pi_ctx->prot_mr); + ib_dereg_mr(pi_ctx->prot_mr); err_prot_frpl: - ib_free_fast_reg_page_list(desc->pi_ctx->prot_frpl); + ib_free_fast_reg_page_list(pi_ctx->prot_frpl); err_pi_ctx: - kfree(desc->pi_ctx); + kfree(pi_ctx); return ret; } From c65b99f046843d2455aa231747b5a07a999a9f3d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 31 May 2015 19:01:07 -0700 Subject: [PATCH 337/337] Linux 4.1-rc6 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 92a707859205..aee7e5cb4c15 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 1 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Hurr durr I'ma sheep # *DOCUMENTATION*