diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 46ab7feec6b6..c77f537323ec 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -24,7 +24,7 @@ config MTD_TESTS config MTD_REDBOOT_PARTS tristate "RedBoot partition table parsing" - ---help--- + help RedBoot is a ROM monitor and bootloader which deals with multiple 'images' in flash devices by putting a table one of the erase blocks on the device, similar to a partition table, which gives @@ -45,7 +45,7 @@ if MTD_REDBOOT_PARTS config MTD_REDBOOT_DIRECTORY_BLOCK int "Location of RedBoot partition table" default "-1" - ---help--- + help This option is the Linux counterpart to the CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK RedBoot compile time option. @@ -75,7 +75,7 @@ endif # MTD_REDBOOT_PARTS config MTD_CMDLINE_PARTS tristate "Command line partition table parsing" depends on MTD - ---help--- + help Allow generic configuration of the MTD partition tables via the kernel command line. Multiple flash resources are supported for hardware where different kinds of flash memory are available. @@ -112,7 +112,7 @@ config MTD_CMDLINE_PARTS config MTD_AFS_PARTS tristate "ARM Firmware Suite partition parsing" depends on (ARM || ARM64) - ---help--- + help The ARM Firmware Suite allows the user to divide flash devices into multiple 'images'. Each such image has a header containing its name and offset/size etc. @@ -136,7 +136,7 @@ config MTD_OF_PARTS config MTD_AR7_PARTS tristate "TI AR7 partitioning support" - ---help--- + help TI AR7 partitioning support config MTD_BCM63XX_PARTS @@ -170,7 +170,7 @@ config MTD_BLOCK tristate "Caching block device access to MTD devices" depends on BLOCK select MTD_BLKDEVS - ---help--- + help Although most flash chips have an erase size too large to be useful as block devices, it is possible to use MTD devices which are based on RAM chips in this manner. This block device is a user of MTD @@ -205,7 +205,7 @@ config FTL tristate "FTL (Flash Translation Layer) support" depends on BLOCK select MTD_BLKDEVS - ---help--- + help This provides support for the original Flash Translation Layer which is part of the PCMCIA specification. It uses a kind of pseudo- file system on a flash device to emulate a block device with @@ -222,7 +222,7 @@ config NFTL tristate "NFTL (NAND Flash Translation Layer) support" depends on BLOCK select MTD_BLKDEVS - ---help--- + help This provides support for the NAND Flash Translation Layer which is used on M-Systems' DiskOnChip devices. It uses a kind of pseudo- file system on a flash device to emulate a block device with @@ -246,7 +246,7 @@ config INFTL tristate "INFTL (Inverse NAND Flash Translation Layer) support" depends on BLOCK select MTD_BLKDEVS - ---help--- + help This provides support for the Inverse NAND Flash Translation Layer which is used on M-Systems' newer DiskOnChip devices. It uses a kind of pseudo-file system on a flash device to emulate @@ -261,10 +261,10 @@ config INFTL not use it. config RFD_FTL - tristate "Resident Flash Disk (Flash Translation Layer) support" + tristate "Resident Flash Disk (Flash Translation Layer) support" depends on BLOCK select MTD_BLKDEVS - ---help--- + help This provides support for the flash translation layer known as the Resident Flash Disk (RFD), as used by the Embedded BIOS of General Software. There is a blurb at: @@ -308,7 +308,7 @@ config MTD_SWAP select MTD_BLKDEVS help Provides volatile block device driver on top of mtd partition - suitable for swapping. The mapping of written blocks is not saved. + suitable for swapping. The mapping of written blocks is not saved. The driver provides wear leveling by storing erase counter into the OOB. diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig index bbfa1f129266..39ec32a29051 100644 --- a/drivers/mtd/chips/Kconfig +++ b/drivers/mtd/chips/Kconfig @@ -44,7 +44,7 @@ choice prompt "Flash cmd/query data swapping" depends on MTD_CFI_ADV_OPTIONS default MTD_CFI_NOSWAP - ---help--- + help This option defines the way in which the CPU attempts to arrange data bits when writing the 'magic' commands to the chips. Saying 'NO', which is the default when CONFIG_MTD_CFI_ADV_OPTIONS isn't diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 57b02c4b3f63..e514d57a0419 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -5,7 +5,7 @@ menu "Self-contained MTD device drivers" config MTD_PMC551 tristate "Ramix PMC551 PCI Mezzanine RAM card support" depends on PCI - ---help--- + help This provides a MTD device driver for the Ramix PMC551 RAM PCI card from Ramix Inc. . These devices come in memory configurations from 32M - 1G. If you @@ -209,7 +209,7 @@ config MTD_DOCG3 select BCH select BCH_CONST_PARAMS select BITREVERSE - ---help--- + help This provides an MTD device driver for the M-Systems DiskOnChip G3 devices. diff --git a/drivers/mtd/lpddr/Kconfig b/drivers/mtd/lpddr/Kconfig index 3a19cbee24d7..a5a332fbd593 100644 --- a/drivers/mtd/lpddr/Kconfig +++ b/drivers/mtd/lpddr/Kconfig @@ -13,10 +13,10 @@ config MTD_QINFO_PROBE depends on MTD_LPDDR tristate "Detect flash chips by QINFO probe" help - Device Information for LPDDR chips is offered through the Overlay - Window QINFO interface, permits software to be used for entire - families of devices. This serves similar purpose of CFI on legacy - Flash products + Device Information for LPDDR chips is offered through the Overlay + Window QINFO interface, permits software to be used for entire + families of devices. This serves similar purpose of CFI on legacy + Flash products config MTD_LPDDR2_NVM # ARM dependency is only for writel_relaxed() diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index bdc1283f30fb..afb36bff13a7 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -207,13 +207,13 @@ config MTD_ICHXROM BE VERY CAREFUL. config MTD_ESB2ROM - tristate "BIOS flash chip on Intel ESB Controller Hub 2" - depends on X86 && MTD_JEDECPROBE && PCI - help - Support for treating the BIOS flash chip on ESB2 motherboards - as an MTD device - with this you can reprogram your BIOS. + tristate "BIOS flash chip on Intel ESB Controller Hub 2" + depends on X86 && MTD_JEDECPROBE && PCI + help + Support for treating the BIOS flash chip on ESB2 motherboards + as an MTD device - with this you can reprogram your BIOS. - BE VERY CAREFUL. + BE VERY CAREFUL. config MTD_CK804XROM tristate "BIOS flash chip on Nvidia CK804" @@ -401,12 +401,12 @@ config MTD_PISMO When built as a module, it will be called pismo.ko config MTD_LATCH_ADDR - tristate "Latch-assisted Flash Chip Support" - depends on MTD_COMPLEX_MAPPINGS - help - Map driver which allows flashes to be partially physically addressed - and have the upper address lines set by a board specific code. + tristate "Latch-assisted Flash Chip Support" + depends on MTD_COMPLEX_MAPPINGS + help + Map driver which allows flashes to be partially physically addressed + and have the upper address lines set by a board specific code. - If compiled as a module, it will be called latch-addr-flash. + If compiled as a module, it will be called latch-addr-flash. endmenu