OMAPDSS: Implement display (dis)connect support

We currently have two steps in panel initialization and startup: probing
and enabling. After the panel has been probed, it's ready and can be
configured and later enabled.

This model is not enough with more complex display pipelines, where we
may have, for example, two panels, of which only one can be used at a
time, connected to the same video output.

To support that kind of scenarios, we need to add new step to the
initialization: connect.

This patch adds support for connecting and disconnecting panels. After
probe, but before connect, no panel ops should be called. When the
connect is called, a proper video pipeline is established, and the panel
is ready for use. If some part in the video pipeline is already
connected (by some other panel), the connect call fails.

One key difference with the old style setup is that connect() handles
also connecting to the overlay manager. This means that the omapfb (or
omapdrm) no longer needs to figure out which overlay manager to use, but
it can just call connect() on the panel, and the proper overlay manager
is connected by omapdss.

This also allows us to add back the support for dynamic switching
between two exclusive panels. However, the current panel device model is
not changed to support this, as the new device model is implemented in
the following patches and the old model will be removed. The new device
model supports dynamic switching.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This commit is contained in:
Tomi Valkeinen 2013-05-08 16:23:32 +03:00
parent 04b1fc0291
commit a7e71e7f9f
9 changed files with 189 additions and 42 deletions

View File

@ -94,6 +94,28 @@ uint32_t pipe2vbl(struct drm_crtc *crtc)
static struct omap_crtc *omap_crtcs[8];
/* we can probably ignore these until we support command-mode panels: */
static int omap_crtc_connect(struct omap_overlay_manager *mgr,
struct omap_dss_output *dst)
{
if (mgr->output)
return -EINVAL;
if ((mgr->supported_outputs & dst->id) == 0)
return -EINVAL;
dst->manager = mgr;
mgr->output = dst;
return 0;
}
static void omap_crtc_disconnect(struct omap_overlay_manager *mgr,
struct omap_dss_output *dst)
{
mgr->output->manager = NULL;
mgr->output = NULL;
}
static void omap_crtc_start_update(struct omap_overlay_manager *mgr)
{
}
@ -138,6 +160,8 @@ static void omap_crtc_unregister_framedone_handler(
}
static const struct dss_mgr_ops mgr_ops = {
.connect = omap_crtc_connect,
.disconnect = omap_crtc_disconnect,
.start_update = omap_crtc_start_update,
.enable = omap_crtc_enable,
.disable = omap_crtc_disable,

View File

@ -97,6 +97,7 @@ static int omap_modeset_init(struct drm_device *dev)
int num_mgrs = dss_feat_get_num_mgrs();
int num_crtcs;
int i, id = 0;
int r;
omap_crtc_pre_init();
@ -118,6 +119,7 @@ static int omap_modeset_init(struct drm_device *dev)
struct drm_connector *connector;
struct drm_encoder *encoder;
enum omap_channel channel;
struct omap_overlay_manager *mgr;
if (!dssdev->driver) {
dev_warn(dev->dev, "%s has no driver.. skipping it\n",
@ -133,6 +135,13 @@ static int omap_modeset_init(struct drm_device *dev)
continue;
}
r = dssdev->driver->connect(dssdev);
if (r) {
dev_err(dev->dev, "could not connect display: %s\n",
dssdev->name);
continue;
}
encoder = omap_encoder_init(dev, dssdev);
if (!encoder) {
@ -174,8 +183,9 @@ static int omap_modeset_init(struct drm_device *dev)
* other possible channels to which the encoder can connect are
* not considered.
*/
channel = dssdev->output->dispc_channel;
mgr = omapdss_find_mgr_from_display(dssdev);
channel = mgr->id;
/*
* if this channel hasn't already been taken by a previously
* allocated crtc, we create a new crtc for it

View File

@ -790,6 +790,18 @@ static void mgr_clear_shadow_dirty(struct omap_overlay_manager *mgr)
}
}
static int dss_mgr_connect_compat(struct omap_overlay_manager *mgr,
struct omap_dss_output *dst)
{
return mgr->set_output(mgr, dst);
}
static void dss_mgr_disconnect_compat(struct omap_overlay_manager *mgr,
struct omap_dss_output *dst)
{
mgr->unset_output(mgr);
}
static void dss_mgr_start_update_compat(struct omap_overlay_manager *mgr)
{
struct mgr_priv_data *mp = get_mgr_priv(mgr);
@ -1552,6 +1564,8 @@ static void dss_mgr_unregister_framedone_handler_compat(struct omap_overlay_mana
}
static const struct dss_mgr_ops apply_mgr_ops = {
.connect = dss_mgr_connect_compat,
.disconnect = dss_mgr_disconnect_compat,
.start_update = dss_mgr_start_update_compat,
.enable = dss_mgr_enable_compat,
.disable = dss_mgr_disable_compat,

View File

@ -379,6 +379,46 @@ static int dss_driver_remove(struct device *dev)
return 0;
}
static int omapdss_default_connect(struct omap_dss_device *dssdev)
{
struct omap_dss_output *out;
struct omap_overlay_manager *mgr;
int r;
out = dssdev->output;
if (out == NULL)
return -ENODEV;
mgr = omap_dss_get_overlay_manager(out->dispc_channel);
if (!mgr)
return -ENODEV;
r = dss_mgr_connect(mgr, out);
if (r)
return r;
return 0;
}
static void omapdss_default_disconnect(struct omap_dss_device *dssdev)
{
struct omap_dss_output *out;
struct omap_overlay_manager *mgr;
out = dssdev->output;
if (out == NULL)
return;
mgr = out->manager;
if (mgr == NULL)
return;
dss_mgr_disconnect(mgr, out);
}
int omap_dss_register_driver(struct omap_dss_driver *dssdriver)
{
dssdriver->driver.bus = &dss_bus_type;
@ -392,6 +432,10 @@ int omap_dss_register_driver(struct omap_dss_driver *dssdriver)
omapdss_default_get_recommended_bpp;
if (dssdriver->get_timings == NULL)
dssdriver->get_timings = omapdss_default_get_timings;
if (dssdriver->connect == NULL)
dssdriver->connect = omapdss_default_connect;
if (dssdriver->disconnect == NULL)
dssdriver->disconnect = omapdss_default_disconnect;
return driver_register(&dssdriver->driver);
}

View File

@ -33,9 +33,9 @@ static ssize_t display_enabled_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct omap_dss_device *dssdev = to_dss_device(dev);
bool enabled = dssdev->state != OMAP_DSS_DISPLAY_DISABLED;
return snprintf(buf, PAGE_SIZE, "%d\n", enabled);
return snprintf(buf, PAGE_SIZE, "%d\n",
omapdss_device_is_enabled(dssdev));
}
static ssize_t display_enabled_store(struct device *dev,
@ -44,20 +44,24 @@ static ssize_t display_enabled_store(struct device *dev,
{
struct omap_dss_device *dssdev = to_dss_device(dev);
int r;
bool enabled;
bool enable;
r = strtobool(buf, &enabled);
r = strtobool(buf, &enable);
if (r)
return r;
if (enabled != (dssdev->state != OMAP_DSS_DISPLAY_DISABLED)) {
if (enabled) {
r = dssdev->driver->enable(dssdev);
if (r)
return r;
} else {
dssdev->driver->disable(dssdev);
}
if (enable == omapdss_device_is_enabled(dssdev))
return size;
if (omapdss_device_is_connected(dssdev) == false)
return -ENODEV;
if (enable) {
r = dssdev->driver->enable(dssdev);
if (r)
return r;
} else {
dssdev->driver->disable(dssdev);
}
return size;

View File

@ -50,6 +50,7 @@ static ssize_t manager_display_store(struct omap_overlay_manager *mgr,
int r = 0;
size_t len = size;
struct omap_dss_device *dssdev = NULL;
struct omap_dss_device *old_dssdev;
int match(struct omap_dss_device *dssdev, void *data)
{
@ -66,34 +67,44 @@ static ssize_t manager_display_store(struct omap_overlay_manager *mgr,
if (len > 0 && dssdev == NULL)
return -EINVAL;
if (dssdev)
if (dssdev) {
DSSDBG("display %s found\n", dssdev->name);
if (mgr->output) {
r = mgr->unset_output(mgr);
if (r) {
DSSERR("failed to unset current output\n");
if (omapdss_device_is_connected(dssdev)) {
DSSERR("new display is already connected\n");
r = -EINVAL;
goto put_device;
}
if (omapdss_device_is_enabled(dssdev)) {
DSSERR("new display is not disabled\n");
r = -EINVAL;
goto put_device;
}
}
if (dssdev) {
struct omap_dss_output *out;
out = omapdss_find_output_from_display(dssdev);
/*
* a registered device should have an output connected to it
* already
*/
if (!out) {
DSSERR("device has no output connected to it\n");
old_dssdev = mgr->get_device(mgr);
if (old_dssdev) {
if (omapdss_device_is_enabled(old_dssdev)) {
DSSERR("old display is not disabled\n");
r = -EINVAL;
goto put_device;
}
r = mgr->set_output(mgr, out);
old_dssdev->driver->disconnect(old_dssdev);
}
if (dssdev) {
r = dssdev->driver->connect(dssdev);
if (r) {
DSSERR("failed to set manager output\n");
DSSERR("failed to connect new device\n");
goto put_device;
}
old_dssdev = mgr->get_device(mgr);
if (old_dssdev != dssdev) {
DSSERR("failed to connect device to this manager\n");
dssdev->driver->disconnect(dssdev);
goto put_device;
}

View File

@ -179,6 +179,20 @@ void dss_uninstall_mgr_ops(void)
}
EXPORT_SYMBOL(dss_uninstall_mgr_ops);
int dss_mgr_connect(struct omap_overlay_manager *mgr,
struct omap_dss_output *dst)
{
return dss_mgr_ops->connect(mgr, dst);
}
EXPORT_SYMBOL(dss_mgr_connect);
void dss_mgr_disconnect(struct omap_overlay_manager *mgr,
struct omap_dss_output *dst)
{
dss_mgr_ops->disconnect(mgr, dst);
}
EXPORT_SYMBOL(dss_mgr_disconnect);
void dss_mgr_set_timings(struct omap_overlay_manager *mgr,
const struct omap_video_timings *timings)
{

View File

@ -1853,6 +1853,8 @@ static void omapfb_free_resources(struct omapfb2_device *fbdev)
if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED)
dssdev->driver->disable(dssdev);
dssdev->driver->disconnect(dssdev);
omap_dss_put_device(dssdev);
}
@ -2363,22 +2365,23 @@ static int omapfb_init_connections(struct omapfb2_device *fbdev,
int i, r;
struct omap_overlay_manager *mgr;
r = def_dssdev->driver->connect(def_dssdev);
if (r) {
dev_err(fbdev->dev, "failed to connect default display\n");
return r;
}
for (i = 0; i < fbdev->num_displays; ++i) {
struct omap_dss_device *dssdev = fbdev->displays[i].dssdev;
struct omap_dss_output *out;
out = omapdss_find_output_from_display(dssdev);
if (!out)
if (dssdev == def_dssdev)
continue;
mgr = omap_dss_get_overlay_manager(out->dispc_channel);
if (!mgr)
continue;
if (mgr->output)
mgr->unset_output(mgr);
mgr->set_output(mgr, out);
/*
* We don't care if the connect succeeds or not. We just want to
* connect as many displays as possible.
*/
dssdev->driver->connect(dssdev);
}
mgr = omapdss_find_mgr_from_display(def_dssdev);

View File

@ -689,6 +689,9 @@ struct omap_dss_driver {
int (*probe)(struct omap_dss_device *);
void (*remove)(struct omap_dss_device *);
int (*connect)(struct omap_dss_device *dssdev);
void (*disconnect)(struct omap_dss_device *dssdev);
int (*enable)(struct omap_dss_device *display);
void (*disable)(struct omap_dss_device *display);
int (*run_test)(struct omap_dss_device *display, int test);
@ -889,6 +892,11 @@ int omapdss_compat_init(void);
void omapdss_compat_uninit(void);
struct dss_mgr_ops {
int (*connect)(struct omap_overlay_manager *mgr,
struct omap_dss_output *dst);
void (*disconnect)(struct omap_overlay_manager *mgr,
struct omap_dss_output *dst);
void (*start_update)(struct omap_overlay_manager *mgr);
int (*enable)(struct omap_overlay_manager *mgr);
void (*disable)(struct omap_overlay_manager *mgr);
@ -905,6 +913,10 @@ struct dss_mgr_ops {
int dss_install_mgr_ops(const struct dss_mgr_ops *mgr_ops);
void dss_uninstall_mgr_ops(void);
int dss_mgr_connect(struct omap_overlay_manager *mgr,
struct omap_dss_output *dst);
void dss_mgr_disconnect(struct omap_overlay_manager *mgr,
struct omap_dss_output *dst);
void dss_mgr_set_timings(struct omap_overlay_manager *mgr,
const struct omap_video_timings *timings);
void dss_mgr_set_lcd_config(struct omap_overlay_manager *mgr,
@ -916,4 +928,15 @@ int dss_mgr_register_framedone_handler(struct omap_overlay_manager *mgr,
void (*handler)(void *), void *data);
void dss_mgr_unregister_framedone_handler(struct omap_overlay_manager *mgr,
void (*handler)(void *), void *data);
static inline bool omapdss_device_is_connected(struct omap_dss_device *dssdev)
{
return dssdev->output;
}
static inline bool omapdss_device_is_enabled(struct omap_dss_device *dssdev)
{
return dssdev->state == OMAP_DSS_DISPLAY_ACTIVE;
}
#endif