diff --git a/sound/soc/codecs/rt5640.c b/sound/soc/codecs/rt5640.c index c26a8f814b18..4d041d376f31 100644 --- a/sound/soc/codecs/rt5640.c +++ b/sound/soc/codecs/rt5640.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -926,7 +927,7 @@ static int rt5640_set_dmic2_event(struct snd_soc_dapm_widget *w, return 0; } -void hp_amp_power_on(struct snd_soc_codec *codec) +static void hp_amp_power_on(struct snd_soc_codec *codec) { struct rt5640_priv *rt5640 = snd_soc_codec_get_drvdata(codec); @@ -1609,7 +1610,8 @@ static int rt5640_hw_params(struct snd_pcm_substream *substream, rt5640->lrck[dai->id] = params_rate(params); pre_div = get_clk_info(rt5640->sysclk, rt5640->lrck[dai->id]); if (pre_div < 0) { - dev_err(codec->dev, "Unsupported clock setting\n"); + dev_err(codec->dev, "Unsupported clock setting %d for DAI %d\n", + rt5640->lrck[dai->id], dai->id); return -EINVAL; } frame_size = snd_soc_params_to_frame_size(params); @@ -1977,13 +1979,20 @@ static int rt5640_suspend(struct snd_soc_codec *codec) rt5640_reset(codec); regcache_cache_only(rt5640->regmap, true); regcache_mark_dirty(rt5640->regmap); + if (gpio_is_valid(rt5640->pdata.ldo1_en)) + gpio_set_value_cansleep(rt5640->pdata.ldo1_en, 0); return 0; } static int rt5640_resume(struct snd_soc_codec *codec) { - rt5640_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + struct rt5640_priv *rt5640 = snd_soc_codec_get_drvdata(codec); + + if (gpio_is_valid(rt5640->pdata.ldo1_en)) { + gpio_set_value_cansleep(rt5640->pdata.ldo1_en, 1); + msleep(400); + } return 0; } @@ -2080,6 +2089,14 @@ static const struct i2c_device_id rt5640_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, rt5640_i2c_id); +#ifdef CONFIG_ACPI +static struct acpi_device_id rt5640_acpi_match[] = { + { "INT33CA", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, rt5640_acpi_match); +#endif + static int rt5640_parse_dt(struct rt5640_priv *rt5640, struct device_node *np) { rt5640->pdata.in1_diff = of_property_read_bool(np, @@ -2199,6 +2216,7 @@ static struct i2c_driver rt5640_i2c_driver = { .driver = { .name = "rt5640", .owner = THIS_MODULE, + .acpi_match_table = ACPI_PTR(rt5640_acpi_match), }, .probe = rt5640_i2c_probe, .remove = rt5640_i2c_remove,