From a631be92b996c5db9b368e8b96305d22fb8c4180 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 12 May 2023 23:07:45 +0200 Subject: [PATCH] cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism The bring up logic of a to be onlined CPU consists of several parts, which are considered to be a single hotplug state: 1) Control CPU issues the wake-up 2) To be onlined CPU starts up, does the minimal initialization, reports to be alive and waits for release into the complete bring-up. 3) Control CPU waits for the alive report and releases the upcoming CPU for the complete bring-up. Allow to split this into two states: 1) Control CPU issues the wake-up After that the to be onlined CPU starts up, does the minimal initialization, reports to be alive and waits for release into the full bring-up. As this can run after the control CPU dropped the hotplug locks the code which is executed on the AP before it reports alive has to be carefully audited to not violate any of the hotplug constraints, especially not modifying any of the various cpumasks. This is really only meant to avoid waiting for the AP to react on the wake-up. Of course an architecture can move strict CPU related setup functionality, e.g. microcode loading, with care before the synchronization point to save further pointless waiting time. 2) Control CPU waits for the alive report and releases the upcoming CPU for the complete bring-up. This allows that the two states can be split up to run all to be onlined CPUs up to state #1 on the control CPU and then at a later point run state #2. This spares some of the latencies of the full serialized per CPU bringup by avoiding the per CPU wakeup/wait serialization. The assumption is that the first AP already waits when the last AP has been woken up. This obvioulsy depends on the hardware latencies and depending on the timings this might still not completely eliminate all wait scenarios. This split is just a preparatory step for enabling the parallel bringup later. The boot time bringup is still fully serialized. It has a separate config switch so that architectures which want to support parallel bringup can test the split of the CPUHP_BRINGUG step separately. To enable this the architecture must support the CPU hotplug core sync mechanism and has to be audited that there are no implicit hotplug state dependencies which require a fully serialized bringup. Signed-off-by: Thomas Gleixner Signed-off-by: Peter Zijlstra (Intel) Tested-by: Michael Kelley Tested-by: Oleksandr Natalenko Tested-by: Helge Deller # parisc Tested-by: Guilherme G. Piccoli # Steam Deck Link: https://lore.kernel.org/r/20230512205257.080801387@linutronix.de --- arch/Kconfig | 4 +++ include/linux/cpuhotplug.h | 4 +++ kernel/cpu.c | 70 ++++++++++++++++++++++++++++++++++++-- 3 files changed, 76 insertions(+), 2 deletions(-) diff --git a/arch/Kconfig b/arch/Kconfig index f55c5fcbea38..d3015a61c148 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -49,6 +49,10 @@ config HOTPLUG_CORE_SYNC_FULL select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU select HOTPLUG_CORE_SYNC +config HOTPLUG_SPLIT_STARTUP + bool + select HOTPLUG_CORE_SYNC_FULL + config GENERIC_ENTRY bool diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h index 5def71f81ec5..bc2d0a1d7608 100644 --- a/include/linux/cpuhotplug.h +++ b/include/linux/cpuhotplug.h @@ -133,6 +133,7 @@ enum cpuhp_state { CPUHP_MIPS_SOC_PREPARE, CPUHP_BP_PREPARE_DYN, CPUHP_BP_PREPARE_DYN_END = CPUHP_BP_PREPARE_DYN + 20, + CPUHP_BP_KICK_AP, CPUHP_BRINGUP_CPU, /* @@ -517,9 +518,12 @@ void cpuhp_online_idle(enum cpuhp_state state); static inline void cpuhp_online_idle(enum cpuhp_state state) { } #endif +struct task_struct; + void cpuhp_ap_sync_alive(void); void arch_cpuhp_sync_state_poll(void); void arch_cpuhp_cleanup_kick_cpu(unsigned int cpu); +int arch_cpuhp_kick_ap_alive(unsigned int cpu, struct task_struct *tidle); #ifdef CONFIG_HOTPLUG_CORE_SYNC_DEAD void cpuhp_ap_report_dead(void); diff --git a/kernel/cpu.c b/kernel/cpu.c index 0ab6a7d430c6..d2487aa4e7c8 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -761,6 +761,47 @@ static int bringup_wait_for_ap_online(unsigned int cpu) return 0; } +#ifdef CONFIG_HOTPLUG_SPLIT_STARTUP +static int cpuhp_kick_ap_alive(unsigned int cpu) +{ + if (!cpuhp_can_boot_ap(cpu)) + return -EAGAIN; + + return arch_cpuhp_kick_ap_alive(cpu, idle_thread_get(cpu)); +} + +static int cpuhp_bringup_ap(unsigned int cpu) +{ + struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); + int ret; + + /* + * Some architectures have to walk the irq descriptors to + * setup the vector space for the cpu which comes online. + * Prevent irq alloc/free across the bringup. + */ + irq_lock_sparse(); + + ret = cpuhp_bp_sync_alive(cpu); + if (ret) + goto out_unlock; + + ret = bringup_wait_for_ap_online(cpu); + if (ret) + goto out_unlock; + + irq_unlock_sparse(); + + if (st->target <= CPUHP_AP_ONLINE_IDLE) + return 0; + + return cpuhp_kick_ap(cpu, st, st->target); + +out_unlock: + irq_unlock_sparse(); + return ret; +} +#else static int bringup_cpu(unsigned int cpu) { struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); @@ -781,7 +822,6 @@ static int bringup_cpu(unsigned int cpu) */ irq_lock_sparse(); - /* Arch-specific enabling code. */ ret = __cpu_up(cpu, idle); if (ret) goto out_unlock; @@ -805,6 +845,7 @@ out_unlock: irq_unlock_sparse(); return ret; } +#endif static int finish_cpu(unsigned int cpu) { @@ -1944,13 +1985,38 @@ static struct cpuhp_step cpuhp_hp_states[] = { .startup.single = timers_prepare_cpu, .teardown.single = timers_dead_cpu, }, - /* Kicks the plugged cpu into life */ + +#ifdef CONFIG_HOTPLUG_SPLIT_STARTUP + /* + * Kicks the AP alive. AP will wait in cpuhp_ap_sync_alive() until + * the next step will release it. + */ + [CPUHP_BP_KICK_AP] = { + .name = "cpu:kick_ap", + .startup.single = cpuhp_kick_ap_alive, + }, + + /* + * Waits for the AP to reach cpuhp_ap_sync_alive() and then + * releases it for the complete bringup. + */ + [CPUHP_BRINGUP_CPU] = { + .name = "cpu:bringup", + .startup.single = cpuhp_bringup_ap, + .teardown.single = finish_cpu, + .cant_stop = true, + }, +#else + /* + * All-in-one CPU bringup state which includes the kick alive. + */ [CPUHP_BRINGUP_CPU] = { .name = "cpu:bringup", .startup.single = bringup_cpu, .teardown.single = finish_cpu, .cant_stop = true, }, +#endif /* Final state before CPU kills itself */ [CPUHP_AP_IDLE_DEAD] = { .name = "idle:dead",