ARM: OMAP: Sync board specific files with linux-omap

This patch syncs omap board specific files with linux-omap tree.

Patch consists mostly of driver updates done in linux-omap
tree for drivers not yet in mainline kernel.

Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Tony Lindgren 2006-12-07 13:58:17 -08:00
parent c79ed1940c
commit a524626b11
8 changed files with 203 additions and 159 deletions

View File

@ -34,20 +34,20 @@ static u8 ams_delta_latch1_reg;
static u16 ams_delta_latch2_reg;
static int ams_delta_keymap[] = {
KEY(0, 0, KEY_F1), /* Advert */
KEY(0, 0, KEY_F1), /* Advert */
KEY(3, 0, KEY_COFFEE), /* Games */
KEY(3, 0, KEY_COFFEE), /* Games */
KEY(2, 0, KEY_QUESTION), /* Directory */
KEY(3, 2, KEY_CONNECT), /* Internet */
KEY(2, 1, KEY_SHOP), /* Services */
KEY(1, 1, KEY_PHONE), /* VoiceMail */
KEY(3, 2, KEY_CONNECT), /* Internet */
KEY(2, 1, KEY_SHOP), /* Services */
KEY(1, 1, KEY_PHONE), /* VoiceMail */
KEY(1, 0, KEY_DELETE), /* Delete */
KEY(2, 2, KEY_PLAY), /* Play */
KEY(0, 1, KEY_PAGEUP), /* Up */
KEY(3, 1, KEY_PAGEDOWN), /* Down */
KEY(0, 2, KEY_EMAIL), /* ReadEmail */
KEY(1, 2, KEY_STOP), /* Stop */
KEY(1, 0, KEY_DELETE), /* Delete */
KEY(2, 2, KEY_PLAY), /* Play */
KEY(0, 1, KEY_PAGEUP), /* Up */
KEY(3, 1, KEY_PAGEDOWN), /* Down */
KEY(0, 2, KEY_EMAIL), /* ReadEmail */
KEY(1, 2, KEY_STOP), /* Stop */
/* Numeric keypad portion */
KEY(7, 0, KEY_KP1),
@ -61,20 +61,20 @@ static int ams_delta_keymap[] = {
KEY(5, 2, KEY_KP9),
KEY(6, 3, KEY_KP0),
KEY(7, 3, KEY_KPASTERISK),
KEY(5, 3, KEY_KPDOT), /* # key */
KEY(2, 7, KEY_NUMLOCK), /* Mute */
KEY(1, 7, KEY_KPMINUS), /* Recall */
KEY(1, 6, KEY_KPPLUS), /* Redial */
KEY(6, 7, KEY_KPSLASH), /* Handsfree */
KEY(0, 6, KEY_ENTER), /* Video */
KEY(5, 3, KEY_KPDOT), /* # key */
KEY(2, 7, KEY_NUMLOCK), /* Mute */
KEY(1, 7, KEY_KPMINUS), /* Recall */
KEY(1, 6, KEY_KPPLUS), /* Redial */
KEY(6, 7, KEY_KPSLASH), /* Handsfree */
KEY(0, 6, KEY_ENTER), /* Video */
KEY(4, 7, KEY_CAMERA), /* Photo */
KEY(4, 7, KEY_CAMERA), /* Photo */
KEY(4, 0, KEY_F2), /* Home */
KEY(4, 1, KEY_F3), /* Office */
KEY(4, 2, KEY_F4), /* Mobile */
KEY(7, 7, KEY_F5), /* SMS */
KEY(5, 7, KEY_F6), /* Email */
KEY(4, 0, KEY_F2), /* Home */
KEY(4, 1, KEY_F3), /* Office */
KEY(4, 2, KEY_F4), /* Mobile */
KEY(7, 7, KEY_F5), /* SMS */
KEY(5, 7, KEY_F6), /* Email */
/* QWERTY portion of keypad */
KEY(4, 3, KEY_Q),
@ -107,7 +107,7 @@ static int ams_delta_keymap[] = {
KEY(3, 6, KEY_M),
KEY(2, 6, KEY_SPACE),
KEY(0, 7, KEY_LEFTSHIFT), /* Vol up */
KEY(0, 7, KEY_LEFTSHIFT), /* Vol up */
KEY(3, 7, KEY_LEFTCTRL), /* Vol down */
0
@ -158,6 +158,10 @@ static struct map_desc ams_delta_io_desc[] __initdata = {
}
};
static struct omap_lcd_config ams_delta_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_uart_config ams_delta_uart_config __initdata = {
.enabled_uarts = 1,
};
@ -169,6 +173,7 @@ static struct omap_usb_config ams_delta_usb_config __initdata = {
};
static struct omap_board_config_kernel ams_delta_config[] = {
{ OMAP_TAG_LCD, &ams_delta_lcd_config },
{ OMAP_TAG_UART, &ams_delta_uart_config },
{ OMAP_TAG_USB, &ams_delta_usb_config },
};
@ -199,6 +204,11 @@ static struct platform_device ams_delta_kp_device = {
.resource = ams_delta_kp_resources,
};
static struct platform_device ams_delta_lcd_device = {
.name = "lcd_ams_delta",
.id = -1,
};
static struct platform_device ams_delta_led_device = {
.name = "ams-delta-led",
.id = -1
@ -206,6 +216,7 @@ static struct platform_device ams_delta_led_device = {
static struct platform_device *ams_delta_devices[] __initdata = {
&ams_delta_kp_device,
&ams_delta_lcd_device,
&ams_delta_led_device,
};

View File

@ -139,6 +139,66 @@ static struct platform_device h2_nor_device = {
.resource = &h2_nor_resource,
};
#if 0 /* REVISIT: Enable when nand_platform_data is applied */
static struct mtd_partition h2_nand_partitions[] = {
#if 0
/* REVISIT: enable these partitions if you make NAND BOOT
* work on your H2 (rev C or newer); published versions of
* x-load only support P2 and H3.
*/
{
.name = "xloader",
.offset = 0,
.size = 64 * 1024,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "bootloader",
.offset = MTDPART_OFS_APPEND,
.size = 256 * 1024,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "params",
.offset = MTDPART_OFS_APPEND,
.size = 192 * 1024,
},
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = 2 * SZ_1M,
},
#endif
{
.name = "filesystem",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
},
};
/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */
static struct nand_platform_data h2_nand_data = {
.options = NAND_SAMSUNG_LP_OPTIONS,
.parts = h2_nand_partitions,
.nr_parts = ARRAY_SIZE(h2_nand_partitions),
};
static struct resource h2_nand_resource = {
.flags = IORESOURCE_MEM,
};
static struct platform_device h2_nand_device = {
.name = "omapnand",
.id = 0,
.dev = {
.platform_data = &h2_nand_data,
},
.num_resources = 1,
.resource = &h2_nand_resource,
};
#endif
static struct resource h2_smc91x_resources[] = {
[0] = {
.start = OMAP1610_ETHR_START, /* Physical */
@ -218,11 +278,15 @@ static struct resource h2_irda_resources[] = {
.flags = IORESOURCE_IRQ,
},
};
static u64 irda_dmamask = 0xffffffff;
static struct platform_device h2_irda_device = {
.name = "omapirda",
.id = 0,
.dev = {
.platform_data = &h2_irda_data,
.dma_mask = &irda_dmamask,
},
.num_resources = ARRAY_SIZE(h2_irda_resources),
.resource = h2_irda_resources,
@ -270,6 +334,7 @@ static struct platform_device h2_mcbsp1_device = {
static struct platform_device *h2_devices[] __initdata = {
&h2_nor_device,
//&h2_nand_device,
&h2_smc91x_device,
&h2_irda_device,
&h2_kp_device,
@ -333,6 +398,13 @@ static struct omap_board_config_kernel h2_config[] __initdata = {
{ OMAP_TAG_LCD, &h2_lcd_config },
};
#define H2_NAND_RB_GPIO_PIN 62
static int h2_nand_dev_ready(struct nand_platform_data *data)
{
return omap_get_gpio_datain(H2_NAND_RB_GPIO_PIN);
}
static void __init h2_init(void)
{
/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
@ -347,6 +419,13 @@ static void __init h2_init(void)
h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys();
h2_nor_resource.end += SZ_32M - 1;
#if 0 /* REVISIT: Enable when nand_platform_data is applied */
h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS;
h2_nand_resource.end += SZ_4K - 1;
if (!(omap_request_gpio(H2_NAND_RB_GPIO_PIN)))
h2_nand_data.dev_ready = h2_nand_dev_ready;
#endif
omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
omap_cfg_reg(M8_1610_FLASH_CS2B_WE);

View File

@ -44,6 +44,8 @@
#include <asm/arch/keypad.h>
#include <asm/arch/dma.h>
#include <asm/arch/common.h>
#include <asm/arch/mcbsp.h>
#include <asm/arch/omap-alsa.h>
extern int omap_gpio_init(void);
@ -351,11 +353,14 @@ static struct resource h3_irda_resources[] = {
},
};
static u64 irda_dmamask = 0xffffffff;
static struct platform_device h3_irda_device = {
.name = "omapirda",
.id = 0,
.dev = {
.platform_data = &h3_irda_data,
.dma_mask = &irda_dmamask,
},
.num_resources = ARRAY_SIZE(h3_irda_resources),
.resource = h3_irda_resources,
@ -366,6 +371,41 @@ static struct platform_device h3_lcd_device = {
.id = -1,
};
static struct omap_mcbsp_reg_cfg mcbsp_regs = {
.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
.spcr1 = RINTM(3) | RRST,
.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
.srgr1 = FWID(15),
.srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
.pcr0 = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP,
//.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
.name = "H3 TSC2101",
.mcbsp_regs_alsa = &mcbsp_regs,
.codec_configure_dev = NULL, // tsc2101_configure,
.codec_set_samplerate = NULL, // tsc2101_set_samplerate,
.codec_clock_setup = NULL, // tsc2101_clock_setup,
.codec_clock_on = NULL, // tsc2101_clock_on,
.codec_clock_off = NULL, // tsc2101_clock_off,
.get_default_samplerate = NULL, // tsc2101_get_default_samplerate,
};
static struct platform_device h3_mcbsp1_device = {
.name = "omap_alsa_mcbsp",
.id = 1,
.dev = {
.platform_data = &alsa_config,
},
};
static struct platform_device *devices[] __initdata = {
&nor_device,
&nand_device,
@ -374,6 +414,7 @@ static struct platform_device *devices[] __initdata = {
&h3_irda_device,
&h3_kp_device,
&h3_lcd_device,
&h3_mcbsp1_device,
};
static struct omap_usb_config h3_usb_config __initdata = {

View File

@ -34,6 +34,8 @@
#include <asm/arch/aic23.h>
#include <asm/arch/gpio.h>
#include "../plat-omap/dsp/dsp_common.h"
static void __init omap_nokia770_init_irq(void)
{
/* On Nokia 770, the SleepX signal is masked with an
@ -91,7 +93,7 @@ static struct platform_device nokia770_kp_device = {
};
static struct platform_device *nokia770_devices[] __initdata = {
&nokia770_kp_device,
&nokia770_kp_device,
};
static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = {
@ -105,7 +107,7 @@ static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata =
static struct spi_board_info nokia770_spi_board_info[] __initdata = {
[0] = {
.modalias = "lcd_mipid",
.modalias = "lcd_mipid",
.bus_num = 2,
.chip_select = 3,
.max_speed_hz = 12000000,
@ -153,6 +155,7 @@ static struct omap_board_config_kernel nokia770_config[] = {
{ OMAP_TAG_MMC, &nokia770_mmc_config },
};
#if defined(CONFIG_OMAP_DSP)
/*
* audio power control
*/
@ -183,7 +186,7 @@ static void nokia770_audio_pwr_up(void)
clk_enable(dspxor_ck);
/* Turn on codec */
tlv320aic23_power_up();
aic23_power_up();
if (omap_get_gpio_datain(HEADPHONE_GPIO))
/* HP not connected, turn on amplifier */
@ -197,7 +200,7 @@ static void codec_delayed_power_down(struct work_struct *work)
{
down(&audio_pwr_sem);
if (audio_pwr_state == -1)
tlv320aic23_power_down();
aic23_power_down();
clk_disable(dspxor_ck);
up(&audio_pwr_sem);
}
@ -213,7 +216,8 @@ static void nokia770_audio_pwr_down(void)
schedule_delayed_work(&codec_power_down_work, HZ / 20); /* 50ms */
}
void nokia770_audio_pwr_up_request(int stage)
static int
nokia770_audio_pwr_up_request(struct dsp_kfunc_device *kdev, int stage)
{
down(&audio_pwr_sem);
if (audio_pwr_state == -1)
@ -221,9 +225,11 @@ void nokia770_audio_pwr_up_request(int stage)
/* force audio_pwr_state = 0, even if it was 1. */
audio_pwr_state = 0;
up(&audio_pwr_sem);
return 0;
}
void nokia770_audio_pwr_down_request(int stage)
static int
nokia770_audio_pwr_down_request(struct dsp_kfunc_device *kdev, int stage)
{
down(&audio_pwr_sem);
switch (stage) {
@ -239,8 +245,39 @@ void nokia770_audio_pwr_down_request(int stage)
break;
}
up(&audio_pwr_sem);
return 0;
}
static struct dsp_kfunc_device nokia770_audio_device = {
.name = "audio",
.type = DSP_KFUNC_DEV_TYPE_AUDIO,
.enable = nokia770_audio_pwr_up_request,
.disable = nokia770_audio_pwr_down_request,
};
static __init int omap_dsp_init(void)
{
int ret;
dspxor_ck = clk_get(0, "dspxor_ck");
if (IS_ERR(dspxor_ck)) {
printk(KERN_ERR "couldn't acquire dspxor_ck\n");
return PTR_ERR(dspxor_ck);
}
ret = dsp_kfunc_device_register(&nokia770_audio_device);
if (ret) {
printk(KERN_ERR
"KFUNC device registration faild: %s\n",
nokia770_audio_device.name);
goto out;
}
return 0;
out:
return ret;
}
#endif /* CONFIG_OMAP_DSP */
static void __init omap_nokia770_init(void)
{
nokia770_config[0].data = &nokia770_usb_config;
@ -251,9 +288,7 @@ static void __init omap_nokia770_init(void)
omap_board_config = nokia770_config;
omap_board_config_size = ARRAY_SIZE(nokia770_config);
omap_serial_init();
omap_dsp_audio_pwr_up_request = nokia770_audio_pwr_up_request;
omap_dsp_audio_pwr_down_request = nokia770_audio_pwr_down_request;
dspxor_ck = clk_get(0, "dspxor_ck");
omap_dsp_init();
}
static void __init omap_nokia770_map_io(void)

View File

@ -29,6 +29,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/interrupt.h>

View File

@ -321,116 +321,6 @@ static struct tsc2102_config palmte_tsc2102_config = {
.alsa_config = &palmte_alsa_config,
};
static struct omap_mcbsp_reg_cfg palmte_mcbsp1_regs = {
.spcr2 = FRST | GRST | XRST | XINTM(3),
.xcr2 = XDATDLY(1) | XFIG,
.xcr1 = XWDLEN1(OMAP_MCBSP_WORD_32),
.pcr0 = SCLKME | FSXP | CLKXP,
};
static struct omap_alsa_codec_config palmte_alsa_config = {
.name = "TSC2102 audio",
.mcbsp_regs_alsa = &palmte_mcbsp1_regs,
.codec_configure_dev = NULL, /* tsc2102_configure, */
.codec_set_samplerate = NULL, /* tsc2102_set_samplerate, */
.codec_clock_setup = NULL, /* tsc2102_clock_setup, */
.codec_clock_on = NULL, /* tsc2102_clock_on, */
.codec_clock_off = NULL, /* tsc2102_clock_off, */
.get_default_samplerate = NULL, /* tsc2102_get_default_samplerate, */
};
#ifdef CONFIG_APM
/*
* Values measured in 10 minute intervals averaged over 10 samples.
* May differ slightly from device to device but should be accurate
* enough to give basic idea of battery life left and trigger
* potential alerts.
*/
static const int palmte_battery_sample[] = {
2194, 2157, 2138, 2120,
2104, 2089, 2075, 2061,
2048, 2038, 2026, 2016,
2008, 1998, 1989, 1980,
1970, 1958, 1945, 1928,
1910, 1888, 1860, 1827,
1791, 1751, 1709, 1656,
};
#define INTERVAL 10
#define BATTERY_HIGH_TRESHOLD 66
#define BATTERY_LOW_TRESHOLD 33
static void palmte_get_power_status(struct apm_power_info *info, int *battery)
{
int charging, batt, hi, lo, mid;
charging = !omap_get_gpio_datain(PALMTE_DC_GPIO);
batt = battery[0];
if (charging)
batt -= 60;
hi = ARRAY_SIZE(palmte_battery_sample);
lo = 0;
info->battery_flag = 0;
info->units = APM_UNITS_MINS;
if (batt > palmte_battery_sample[lo]) {
info->battery_life = 100;
info->time = INTERVAL * ARRAY_SIZE(palmte_battery_sample);
} else if (batt <= palmte_battery_sample[hi - 1]) {
info->battery_life = 0;
info->time = 0;
} else {
while (hi > lo + 1) {
mid = (hi + lo) >> 2;
if (batt <= palmte_battery_sample[mid])
lo = mid;
else
hi = mid;
}
mid = palmte_battery_sample[lo] - palmte_battery_sample[hi];
hi = palmte_battery_sample[lo] - batt;
info->battery_life = 100 - (100 * lo + 100 * hi / mid) /
ARRAY_SIZE(palmte_battery_sample);
info->time = INTERVAL * (ARRAY_SIZE(palmte_battery_sample) -
lo) - INTERVAL * hi / mid;
}
if (charging) {
info->ac_line_status = APM_AC_ONLINE;
info->battery_status = APM_BATTERY_STATUS_CHARGING;
info->battery_flag |= APM_BATTERY_FLAG_CHARGING;
} else {
info->ac_line_status = APM_AC_OFFLINE;
if (info->battery_life > BATTERY_HIGH_TRESHOLD)
info->battery_status = APM_BATTERY_STATUS_HIGH;
else if (info->battery_life > BATTERY_LOW_TRESHOLD)
info->battery_status = APM_BATTERY_STATUS_LOW;
else
info->battery_status = APM_BATTERY_STATUS_CRITICAL;
}
if (info->battery_life > BATTERY_HIGH_TRESHOLD)
info->battery_flag |= APM_BATTERY_FLAG_HIGH;
else if (info->battery_life > BATTERY_LOW_TRESHOLD)
info->battery_flag |= APM_BATTERY_FLAG_LOW;
else
info->battery_flag |= APM_BATTERY_FLAG_CRITICAL;
}
#else
#define palmte_get_power_status NULL
#endif
static struct tsc2102_config palmte_tsc2102_config = {
.use_internal = 0,
.monitor = TSC_BAT1 | TSC_AUX | TSC_TEMP,
.temp_at25c = { 2200, 2615 },
.apm_report = palmte_get_power_status,
.alsa_config = &palmte_alsa_config,
};
static struct omap_board_config_kernel palmte_config[] = {
{ OMAP_TAG_USB, &palmte_usb_config },
{ OMAP_TAG_MMC, &palmte_mmc_config },
@ -449,17 +339,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = {
},
};
static struct spi_board_info palmte_spi_info[] __initdata = {
{
.modalias = "tsc2102",
.bus_num = 2, /* uWire (officially) */
.chip_select = 0, /* As opposed to 3 */
.irq = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),
.platform_data = &palmte_tsc2102_config,
.max_speed_hz = 8000000,
},
};
/* Periodically check for changes on important input pins */
struct timer_list palmte_pin_timer;
int prev_power, prev_headphones;
@ -539,8 +418,6 @@ static void __init omap_palmte_init(void)
spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
omap_serial_init();
palmte_gpio_setup();
}

View File

@ -314,8 +314,8 @@ static struct omap_uart_config palmtt_uart_config __initdata = {
};
static struct omap_board_config_kernel palmtt_config[] = {
{ OMAP_TAG_USB, &palmtt_usb_config },
{ OMAP_TAG_LCD, &palmtt_lcd_config },
{ OMAP_TAG_USB, &palmtt_usb_config },
{ OMAP_TAG_LCD, &palmtt_lcd_config },
{ OMAP_TAG_UART, &palmtt_uart_config },
};

View File

@ -235,7 +235,7 @@ static struct notifier_block panic_block = {
static int __init voiceblue_setup(void)
{
/* Setup panic notifier */
notifier_chain_register(&panic_notifier_list, &panic_block);
atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
return 0;
}