drm/bridge: tc358764: Use BIT() macro for actual bits
None of these four bits are bitfields, use BIT() macro and treat them as bits. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230615201635.565973-1-marex@denx.de
This commit is contained in:
parent
21aa27ddc5
commit
a4c253d4f3
|
@ -42,10 +42,10 @@
|
|||
|
||||
/* Video path registers */
|
||||
#define VP_CTRL 0x0450 /* Video Path Control */
|
||||
#define VP_CTRL_MSF(v) FLD_VAL(v, 0, 0) /* Magic square in RGB666 */
|
||||
#define VP_CTRL_VTGEN(v) FLD_VAL(v, 4, 4) /* Use chip clock for timing */
|
||||
#define VP_CTRL_EVTMODE(v) FLD_VAL(v, 5, 5) /* Event mode */
|
||||
#define VP_CTRL_RGB888(v) FLD_VAL(v, 8, 8) /* RGB888 mode */
|
||||
#define VP_CTRL_MSF BIT(0) /* Magic square in RGB666 */
|
||||
#define VP_CTRL_VTGEN BIT(4) /* Use chip clock for timing */
|
||||
#define VP_CTRL_EVTMODE BIT(5) /* Event mode */
|
||||
#define VP_CTRL_RGB888 BIT(8) /* RGB888 mode */
|
||||
#define VP_CTRL_VSDELAY(v) FLD_VAL(v, 31, 20) /* VSYNC delay */
|
||||
#define VP_CTRL_HSPOL BIT(17) /* Polarity of HSYNC signal */
|
||||
#define VP_CTRL_DEPOL BIT(18) /* Polarity of DE signal */
|
||||
|
@ -233,8 +233,8 @@ static int tc358764_init(struct tc358764 *ctx)
|
|||
tc358764_write(ctx, DSI_STARTDSI, DSI_RX_START);
|
||||
|
||||
/* configure video path */
|
||||
tc358764_write(ctx, VP_CTRL, VP_CTRL_VSDELAY(15) | VP_CTRL_RGB888(1) |
|
||||
VP_CTRL_EVTMODE(1) | VP_CTRL_HSPOL | VP_CTRL_VSPOL);
|
||||
tc358764_write(ctx, VP_CTRL, VP_CTRL_VSDELAY(15) | VP_CTRL_RGB888 |
|
||||
VP_CTRL_EVTMODE | VP_CTRL_HSPOL | VP_CTRL_VSPOL);
|
||||
|
||||
/* reset PHY */
|
||||
tc358764_write(ctx, LV_PHY0, LV_PHY0_RST(1) |
|
||||
|
|
Loading…
Reference in New Issue