UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

[PATCH] hostap: allow flashing firmware 

Host AP driver has code to support writing firmware to non-volatile
memory, a.k.a. flash.  This code has been extensively tested when Host
AP was a standalone driver.

Add a configuration option to the kernel to allow enabling this
functionality.  Improve the description of the RAM download option.
Mention cards that require it.  Remove obsolete scary comment.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Pavel Roskin 2005-12-30 18:22:26 -05:00 committed by John W. Linville
parent d834a41c96
commit a485cde662
2 changed files with 22 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
drivers/net/wireless/hostap/Kconfig
View File

@ -26,11 +26,25 @@ config HOSTAP_FIRMWARE
depends on HOSTAP
---help---
Configure Host AP driver to include support for firmware image
download. Current version supports only downloading to volatile, i.e.,
RAM memory. Flash upgrade is not yet supported.
download. This option by itself only enables downloading to the
volatile memory, i.e. the card RAM. This option is required to
support cards that don't have firmware in flash, such as D-Link
DWL-520 rev E and D-Link DWL-650 rev P.
Firmware image downloading needs user space tool, prism2_srec. It is
available from http://hostap.epitest.fi/.
Firmware image downloading needs a user space tool, prism2_srec.
It is available from http://hostap.epitest.fi/.
config HOSTAP_FIRMWARE_NVRAM
bool "Support for non-volatile firmware download"
depends on HOSTAP_FIRMWARE
---help---
Allow Host AP driver to write firmware images to the non-volatile
card memory, i.e. flash memory that survives power cycling.
Enable this option if you want to be able to change card firmware
permanently.
Firmware image downloading needs a user space tool, prism2_srec.
It is available from http://hostap.epitest.fi/.
config HOSTAP_PLX
tristate "Host AP driver for Prism2/2.5/3 in PLX9052 PCI adaptors"

13
drivers/net/wireless/hostap/hostap_config.h
View File

@ -21,15 +21,10 @@
#define PRISM2_DOWNLOAD_SUPPORT
#endif
#ifdef PRISM2_DOWNLOAD_SUPPORT
/* Allow writing firmware images into flash, i.e., to non-volatile storage.
* Before you enable this option, you should make absolutely sure that you are
* using prism2_srec utility that comes with THIS version of the driver!
* In addition, please note that it is possible to kill your card with
* non-volatile download if you are using incorrect image. This feature has not
* been fully tested, so please be careful with it. */
/* #define PRISM2_NON_VOLATILE_DOWNLOAD */
#endif /* PRISM2_DOWNLOAD_SUPPORT */
/* Allow kernel configuration to enable non-volatile download support. */
#ifdef CONFIG_HOSTAP_FIRMWARE_NVRAM
#define PRISM2_NON_VOLATILE_DOWNLOAD
#endif
/* Save low-level I/O for debugging. This should not be enabled in normal use.
*/