UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

ata: Convert dev_printk(KERN_<LEVEL> to dev_<level>( 

Saves a bit of text as the call takes fewer args.

Coalesce a few formats.
Convert a few bare printks to pr_cont.

$ size drivers/ata/built-in.o*
   text	   data	    bss	    dec	    hex	filename
 558429	  73893	 117864	 750186	  b726a	drivers/ata/built-in.o.allyesconfig.new
 559574	  73893	 117888	 751355	  b76fb	drivers/ata/built-in.o.allyesconfig.old
 149567	  14689	   4220	 168476	  2921c	drivers/ata/built-in.o.defconfig.new
 149851	  14689	   4220	 168760	  29338	drivers/ata/built-in.o.defconfig.old

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
This commit is contained in:
Joe Perches 2011-04-15 15:51:58 -07:00 committed by Jeff Garzik
parent 02f8c6aee8
commit a44fec1fce
27 changed files with 189 additions and 230 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
drivers/ata/acard-ahci.c
View File

@ -135,8 +135,8 @@ static int acard_ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg
if (mesg.event & PM_EVENT_SUSPEND &&
hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
dev_printk(KERN_ERR, &pdev->dev,
"BIOS update required for suspend/resume\n");
dev_err(&pdev->dev,
"BIOS update required for suspend/resume\n");
return -EIO;
}
@ -187,7 +187,7 @@ static int acard_ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
if (rc) {
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
dev_err(&pdev->dev,
"64-bit DMA enable failed\n");
return rc;
}
@ -195,14 +195,13 @@ static int acard_ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
} else {
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit DMA enable failed\n");
dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit consistent DMA enable failed\n");
dev_err(&pdev->dev,
"32-bit consistent DMA enable failed\n");
return rc;
}
}
@ -343,14 +342,12 @@ static int acard_ahci_port_start(struct ata_port *ap)
if (cmd & PORT_CMD_FBSCP)
pp->fbs_supported = true;
else if (hpriv->flags & AHCI_HFLAG_YES_FBS) {
dev_printk(KERN_INFO, dev,
"port %d can do FBS, forcing FBSCP\n",
ap->port_no);
dev_info(dev, "port %d can do FBS, forcing FBSCP\n",
ap->port_no);
pp->fbs_supported = true;
} else
dev_printk(KERN_WARNING, dev,
"port %d is not capable of FBS\n",
ap->port_no);
dev_warn(dev, "port %d is not capable of FBS\n",
ap->port_no);
}
if (pp->fbs_supported) {

44
drivers/ata/ahci.c
View File

@ -629,8 +629,8 @@ static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
if (mesg.event & PM_EVENT_SUSPEND &&
hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
dev_printk(KERN_ERR, &pdev->dev,
"BIOS update required for suspend/resume\n");
dev_err(&pdev->dev,
"BIOS update required for suspend/resume\n");
return -EIO;
}
@ -681,22 +681,21 @@ static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
if (rc) {
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"64-bit DMA enable failed\n");
dev_err(&pdev->dev,
"64-bit DMA enable failed\n");
return rc;
}
}
} else {
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit DMA enable failed\n");
dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit consistent DMA enable failed\n");
dev_err(&pdev->dev,
"32-bit consistent DMA enable failed\n");
return rc;
}
}
@ -759,8 +758,8 @@ static void ahci_p5wdh_workaround(struct ata_host *host)
dmi_check_system(sysids)) {
struct ata_port *ap = host->ports[1];
dev_printk(KERN_INFO, &pdev->dev, "enabling ASUS P5W DH "
"Deluxe on-board SIMG4726 workaround\n");
dev_info(&pdev->dev,
"enabling ASUS P5W DH Deluxe on-board SIMG4726 workaround\n");
ap->ops = &ahci_p5wdh_ops;
ap->link.flags |= ATA_LFLAG_NO_SRST | ATA_LFLAG_ASSUME_ATA;
@ -831,14 +830,14 @@ static bool ahci_sb600_enable_64bit(struct pci_dev *pdev)
if (strcmp(buf, match->driver_data) >= 0)
goto enable_64bit;
else {
dev_printk(KERN_WARNING, &pdev->dev, "%s: BIOS too old, "
"forcing 32bit DMA, update BIOS\n", match->ident);
dev_warn(&pdev->dev,
"%s: BIOS too old, forcing 32bit DMA, update BIOS\n",
match->ident);
return false;
}
enable_64bit:
dev_printk(KERN_WARNING, &pdev->dev, "%s: enabling 64bit DMA\n",
match->ident);
dev_warn(&pdev->dev, "%s: enabling 64bit DMA\n", match->ident);
return true;
}
@ -1041,9 +1040,8 @@ static void ahci_gtf_filter_workaround(struct ata_host *host)
return;
filter = (unsigned long)dmi->driver_data;
dev_printk(KERN_INFO, host->dev,
"applying extra ACPI _GTF filter 0x%x for %s\n",
filter, dmi->ident);
dev_info(host->dev, "applying extra ACPI _GTF filter 0x%x for %s\n",
filter, dmi->ident);
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
@ -1099,8 +1097,8 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
* that for SAS drives they're out of luck.
*/
if (pdev->vendor == PCI_VENDOR_ID_PROMISE)
dev_printk(KERN_INFO, &pdev->dev, "PDC42819 "
"can only drive SATA devices with this driver\n");
dev_info(&pdev->dev,
"PDC42819 can only drive SATA devices with this driver\n");
/* acquire resources */
rc = pcim_enable_device(pdev);
@ -1126,8 +1124,8 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
*/
pci_read_config_byte(pdev, ICH_MAP, &map);
if (map & 0x3) {
dev_printk(KERN_INFO, &pdev->dev, "controller is in "
"combined mode, can't enable AHCI mode\n");
dev_info(&pdev->dev,
"controller is in combined mode, can't enable AHCI mode\n");
return -ENODEV;
}
}
@ -1184,8 +1182,8 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (ahci_broken_suspend(pdev)) {
hpriv->flags |= AHCI_HFLAG_NO_SUSPEND;
dev_printk(KERN_WARNING, &pdev->dev,
"BIOS update required for suspend/resume\n");
dev_warn(&pdev->dev,
"BIOS update required for suspend/resume\n");
}
if (ahci_broken_online(pdev)) {

39
drivers/ata/ata_piix.c
View File

@ -1225,8 +1225,9 @@ static int piix_pci_device_resume(struct pci_dev *pdev)
*/
rc = pci_reenable_device(pdev);
if (rc)
dev_printk(KERN_ERR, &pdev->dev, "failed to enable "
"device after resume (%d)\n", rc);
dev_err(&pdev->dev,
"failed to enable device after resume (%d)\n",
rc);
} else
rc = ata_pci_device_do_resume(pdev);
@ -1303,9 +1304,11 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev)
no_piix_dma = 2;
}
if (no_piix_dma)
dev_printk(KERN_WARNING, &ata_dev->dev, "450NX errata present, disabling IDE DMA.\n");
if (no_piix_dma == 2)
dev_printk(KERN_WARNING, &ata_dev->dev, "A BIOS update may resolve this.\n");
dev_warn(&ata_dev->dev,
"450NX errata present, disabling IDE DMA%s\n",
no_piix_dma == 2 ? " - a BIOS update may resolve this"
: "");
return no_piix_dma;
}
@ -1338,37 +1341,36 @@ static const int *__devinit piix_init_sata_map(struct pci_dev *pdev,
map = map_db->map[map_value & map_db->mask];
dev_printk(KERN_INFO, &pdev->dev, "MAP [");
dev_info(&pdev->dev, "MAP [");
for (i = 0; i < 4; i++) {
switch (map[i]) {
case RV:
invalid_map = 1;
printk(" XX");
pr_cont(" XX");
break;
case NA:
printk(" --");
pr_cont(" --");
break;
case IDE:
WARN_ON((i & 1) || map[i + 1] != IDE);
pinfo[i / 2] = piix_port_info[ich_pata_100];
i++;
printk(" IDE IDE");
pr_cont(" IDE IDE");
break;
default:
printk(" P%d", map[i]);
pr_cont(" P%d", map[i]);
if (i & 1)
pinfo[i / 2].flags |= ATA_FLAG_SLAVE_POSS;
break;
}
}
printk(" ]\n");
pr_cont(" ]\n");
if (invalid_map)
dev_printk(KERN_ERR, &pdev->dev,
"invalid MAP value %u\n", map_value);
dev_err(&pdev->dev, "invalid MAP value %u\n", map_value);
return map;
}
@ -1398,8 +1400,8 @@ static bool piix_no_sidpr(struct ata_host *host)
if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2920 &&
pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG &&
pdev->subsystem_device == 0xb049) {
dev_printk(KERN_WARNING, host->dev,
"Samsung DB-P70 detected, disabling SIDPR\n");
dev_warn(host->dev,
"Samsung DB-P70 detected, disabling SIDPR\n");
return true;
}
@ -1451,8 +1453,8 @@ static int __devinit piix_init_sidpr(struct ata_host *host)
piix_sidpr_scr_read(link0, SCR_CONTROL, &scontrol);
if ((scontrol & 0xf00) != 0x300) {
dev_printk(KERN_INFO, host->dev, "SCR access via "
"SIDPR is available but doesn't work\n");
dev_info(host->dev,
"SCR access via SIDPR is available but doesn't work\n");
return 0;
}
}
@ -1501,8 +1503,7 @@ static void piix_iocfg_bit18_quirk(struct ata_host *host)
* affected systems.
*/
if (hpriv->saved_iocfg & (1 << 18)) {
dev_printk(KERN_INFO, &pdev->dev,
"applying IOCFG bit18 quirk\n");
dev_info(&pdev->dev, "applying IOCFG bit18 quirk\n");
pci_write_config_dword(pdev, PIIX_IOCFG,
hpriv->saved_iocfg & ~(1 << 18));
}

71
drivers/ata/libahci.c
View File

@ -410,51 +410,46 @@ void ahci_save_initial_config(struct device *dev,
/* some chips have errata preventing 64bit use */
if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
dev_printk(KERN_INFO, dev,
"controller can't do 64bit DMA, forcing 32bit\n");
dev_info(dev, "controller can't do 64bit DMA, forcing 32bit\n");
cap &= ~HOST_CAP_64;
}
if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) {
dev_printk(KERN_INFO, dev,
"controller can't do NCQ, turning off CAP_NCQ\n");
dev_info(dev, "controller can't do NCQ, turning off CAP_NCQ\n");
cap &= ~HOST_CAP_NCQ;
}
if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) {
dev_printk(KERN_INFO, dev,
"controller can do NCQ, turning on CAP_NCQ\n");
dev_info(dev, "controller can do NCQ, turning on CAP_NCQ\n");
cap |= HOST_CAP_NCQ;
}
if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
dev_printk(KERN_INFO, dev,
"controller can't do PMP, turning off CAP_PMP\n");
dev_info(dev, "controller can't do PMP, turning off CAP_PMP\n");
cap &= ~HOST_CAP_PMP;
}
if ((cap & HOST_CAP_SNTF) && (hpriv->flags & AHCI_HFLAG_NO_SNTF)) {
dev_printk(KERN_INFO, dev,
"controller can't do SNTF, turning off CAP_SNTF\n");
dev_info(dev,
"controller can't do SNTF, turning off CAP_SNTF\n");
cap &= ~HOST_CAP_SNTF;
}
if (!(cap & HOST_CAP_FBS) && (hpriv->flags & AHCI_HFLAG_YES_FBS)) {
dev_printk(KERN_INFO, dev,
"controller can do FBS, turning on CAP_FBS\n");
dev_info(dev, "controller can do FBS, turning on CAP_FBS\n");
cap |= HOST_CAP_FBS;
}
if (force_port_map && port_map != force_port_map) {
dev_printk(KERN_INFO, dev, "forcing port_map 0x%x -> 0x%x\n",
port_map, force_port_map);
dev_info(dev, "forcing port_map 0x%x -> 0x%x\n",
port_map, force_port_map);
port_map = force_port_map;
}
if (mask_port_map) {
dev_printk(KERN_WARNING, dev, "masking port_map 0x%x -> 0x%x\n",
port_map,
port_map & mask_port_map);
dev_warn(dev, "masking port_map 0x%x -> 0x%x\n",
port_map,
port_map & mask_port_map);
port_map &= mask_port_map;
}
@ -470,10 +465,9 @@ void ahci_save_initial_config(struct device *dev,
* port_map and let it be generated from n_ports.
*/
if (map_ports > ahci_nr_ports(cap)) {
dev_printk(KERN_WARNING, dev,
"implemented port map (0x%x) contains more "
"ports than nr_ports (%u), using nr_ports\n",
port_map, ahci_nr_ports(cap));
dev_warn(dev,
"implemented port map (0x%x) contains more ports than nr_ports (%u), using nr_ports\n",
port_map, ahci_nr_ports(cap));
port_map = 0;
}
}
@ -481,8 +475,7 @@ void ahci_save_initial_config(struct device *dev,
/* fabricate port_map from cap.nr_ports */
if (!port_map) {
port_map = (1 << ahci_nr_ports(cap)) - 1;
dev_printk(KERN_WARNING, dev,
"forcing PORTS_IMPL to 0x%x\n", port_map);
dev_warn(dev, "forcing PORTS_IMPL to 0x%x\n", port_map);
/* write the fixed up value to the PI register */
hpriv->saved_port_map = port_map;
@ -822,8 +815,8 @@ int ahci_reset_controller(struct ata_host *host)
HOST_RESET, 10, 1000);
if (tmp & HOST_RESET) {
dev_printk(KERN_ERR, host->dev,
"controller reset failed (0x%x)\n", tmp);
dev_err(host->dev, "controller reset failed (0x%x)\n",
tmp);
return -EIO;
}
@ -835,8 +828,7 @@ int ahci_reset_controller(struct ata_host *host)
*/
ahci_restore_initial_config(host);
} else
dev_printk(KERN_INFO, host->dev,
"skipping global host reset\n");
dev_info(host->dev, "skipping global host reset\n");
return 0;
}
@ -1474,8 +1466,7 @@ static void ahci_fbs_dec_intr(struct ata_port *ap)
}
if (fbs & PORT_FBS_DEC)
dev_printk(KERN_ERR, ap->host->dev,
"failed to clear device error\n");
dev_err(ap->host->dev, "failed to clear device error\n");
}
static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
@ -1713,8 +1704,8 @@ irqreturn_t ahci_interrupt(int irq, void *dev_instance)
} else {
VPRINTK("port %u (no irq)\n", i);
if (ata_ratelimit())
dev_printk(KERN_WARNING, host->dev,
"interrupt on disabled port %u\n", i);
dev_warn(host->dev,
"interrupt on disabled port %u\n", i);
}
handled = 1;
@ -1865,11 +1856,11 @@ static void ahci_enable_fbs(struct ata_port *ap)
writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS);
fbs = readl(port_mmio + PORT_FBS);
if (fbs & PORT_FBS_EN) {
dev_printk(KERN_INFO, ap->host->dev, "FBS is enabled.\n");
dev_info(ap->host->dev, "FBS is enabled\n");
pp->fbs_enabled = true;
pp->fbs_last_dev = -1; /* initialization */
} else
dev_printk(KERN_ERR, ap->host->dev, "Failed to enable FBS\n");
dev_err(ap->host->dev, "Failed to enable FBS\n");
ahci_start_engine(ap);
}
@ -1897,9 +1888,9 @@ static void ahci_disable_fbs(struct ata_port *ap)
writel(fbs & ~PORT_FBS_EN, port_mmio + PORT_FBS);
fbs = readl(port_mmio + PORT_FBS);
if (fbs & PORT_FBS_EN)
dev_printk(KERN_ERR, ap->host->dev, "Failed to disable FBS\n");
dev_err(ap->host->dev, "Failed to disable FBS\n");
else {
dev_printk(KERN_INFO, ap->host->dev, "FBS is disabled.\n");
dev_info(ap->host->dev, "FBS is disabled\n");
pp->fbs_enabled = false;
}
@ -2003,14 +1994,12 @@ static int ahci_port_start(struct ata_port *ap)
if (cmd & PORT_CMD_FBSCP)
pp->fbs_supported = true;
else if (hpriv->flags & AHCI_HFLAG_YES_FBS) {
dev_printk(KERN_INFO, dev,
"port %d can do FBS, forcing FBSCP\n",
ap->port_no);
dev_info(dev, "port %d can do FBS, forcing FBSCP\n",
ap->port_no);
pp->fbs_supported = true;
} else
dev_printk(KERN_WARNING, dev,
"port %d is not capable of FBS\n",
ap->port_no);
dev_warn(dev, "port %d is not capable of FBS\n",
ap->port_no);
}
if (pp->fbs_supported) {

13
drivers/ata/libata-core.c
View File

@ -5847,9 +5847,9 @@ int ata_host_start(struct ata_host *host)
rc = ap->ops->port_start(ap);
if (rc) {
if (rc != -ENODEV)
dev_printk(KERN_ERR, host->dev,
"failed to start port %d "
"(errno=%d)\n", i, rc);
dev_err(host->dev,
"failed to start port %d (errno=%d)\n",
i, rc);
goto err_out;
}
}
@ -5971,8 +5971,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
/* host must have been started */
if (!(host->flags & ATA_HOST_STARTED)) {
dev_printk(KERN_ERR, host->dev,
"BUG: trying to register unstarted host\n");
dev_err(host->dev, "BUG: trying to register unstarted host\n");
WARN_ON(1);
return -EINVAL;
}
@ -6242,8 +6241,8 @@ int ata_pci_device_do_resume(struct pci_dev *pdev)
rc = pcim_enable_device(pdev);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"failed to enable device after resume (%d)\n", rc);
dev_err(&pdev->dev,
"failed to enable device after resume (%d)\n", rc);
return rc;
}

20
drivers/ata/libata-sff.c
View File

@ -2316,9 +2316,9 @@ int ata_pci_sff_init_host(struct ata_host *host)
rc = pcim_iomap_regions(pdev, 0x3 << base,
dev_driver_string(gdev));
if (rc) {
dev_printk(KERN_WARNING, gdev,
"failed to request/iomap BARs for port %d "
"(errno=%d)\n", i, rc);
dev_warn(gdev,
"failed to request/iomap BARs for port %d (errno=%d)\n",
i, rc);
if (rc == -EBUSY)
pcim_pin_device(pdev);
ap->ops = &ata_dummy_port_ops;
@ -2340,7 +2340,7 @@ int ata_pci_sff_init_host(struct ata_host *host)
}
if (!mask) {
dev_printk(KERN_ERR, gdev, "no available native port\n");
dev_err(gdev, "no available native port\n");
return -ENODEV;
}
@ -2375,8 +2375,7 @@ int ata_pci_sff_prepare_host(struct pci_dev *pdev,
host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
if (!host) {
dev_printk(KERN_ERR, &pdev->dev,
"failed to allocate ATA host\n");
dev_err(&pdev->dev, "failed to allocate ATA host\n");
rc = -ENOMEM;
goto err_out;
}
@ -2542,8 +2541,7 @@ int ata_pci_sff_init_one(struct pci_dev *pdev,
pi = ata_sff_find_valid_pi(ppi);
if (!pi) {
dev_printk(KERN_ERR, &pdev->dev,
"no valid port_info specified\n");
dev_err(&pdev->dev, "no valid port_info specified\n");
return -EINVAL;
}
@ -3164,8 +3162,7 @@ static void ata_bmdma_nodma(struct ata_host *host, const char *reason)
{
int i;
dev_printk(KERN_ERR, host->dev, "BMDMA: %s, falling back to PIO\n",
reason);
dev_err(host->dev, "BMDMA: %s, falling back to PIO\n", reason);
for (i = 0; i < 2; i++) {
host->ports[i]->mwdma_mask = 0;
@ -3297,8 +3294,7 @@ int ata_pci_bmdma_init_one(struct pci_dev *pdev,
pi = ata_sff_find_valid_pi(ppi);
if (!pi) {
dev_printk(KERN_ERR, &pdev->dev,
"no valid port_info specified\n");
dev_err(&pdev->dev, "no valid port_info specified\n");
return -EINVAL;
}

2
drivers/ata/pata_amd.c
View File

@ -60,7 +60,7 @@ static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offse
UT = T / 2;
if (ata_timing_compute(adev, speed, &at, T, UT) < 0) {
dev_printk(KERN_ERR, &pdev->dev, "unknown mode %d.\n", speed);
dev_err(&pdev->dev, "unknown mode %d\n", speed);
return;
}

11
drivers/ata/pata_atp867x.c
View File

@ -470,7 +470,7 @@ static int atp867x_ata_pci_sff_init_host(struct ata_host *host)
}
if (!mask) {
dev_printk(KERN_ERR, gdev, "no available native port\n");
dev_err(gdev, "no available native port\n");
return -ENODEV;
}
@ -500,7 +500,7 @@ static int atp867x_init_one(struct pci_dev *pdev,
int rc;
if (!printed_version++)
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
dev_info(&pdev->dev, "version " DRV_VERSION "\n");
rc = pcim_enable_device(pdev);
if (rc)
@ -511,15 +511,14 @@ static int atp867x_init_one(struct pci_dev *pdev,
host = ata_host_alloc_pinfo(&pdev->dev, ppi, ATP867X_NUM_PORTS);
if (!host) {
dev_printk(KERN_ERR, &pdev->dev,
"failed to allocate ATA host\n");
dev_err(&pdev->dev, "failed to allocate ATA host\n");
rc = -ENOMEM;
goto err_out;
}
rc = atp867x_ata_pci_sff_init_host(host);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev, "failed to init host\n");
dev_err(&pdev->dev, "failed to init host\n");
goto err_out;
}
@ -528,7 +527,7 @@ static int atp867x_init_one(struct pci_dev *pdev,
rc = ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
IRQF_SHARED, &atp867x_sht);
if (rc)
dev_printk(KERN_ERR, &pdev->dev, "failed to activate host\n");
dev_err(&pdev->dev, "failed to activate host\n");
err_out:
return rc;

3
drivers/ata/pata_cs5520.c
View File

@ -149,8 +149,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi
ppi[1] = &pi;
if ((pcicfg & 0x40) == 0) {
dev_printk(KERN_WARNING, &pdev->dev,
"DMA mode disabled. Enabling.\n");
dev_warn(&pdev->dev, "DMA mode disabled. Enabling.\n");
pci_write_config_byte(pdev, 0x60, pcicfg | 0x40);
}

2
drivers/ata/pata_ixp4xx_cf.c
View File

@ -181,7 +181,7 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
ixp4xx_setup_port(ap, data, cs0->start, cs1->start);
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
dev_info(&pdev->dev, "version " DRV_VERSION "\n");
/* activate host */
return ata_host_activate(host, irq, ata_sff_interrupt, 0, &ixp4xx_sht);

5
drivers/ata/pata_macio.c
View File

@ -772,8 +772,9 @@ static void pata_macio_reset_hw(struct pata_macio_priv *priv, int resume)
pci_restore_state(priv->pdev);
rc = pcim_enable_device(priv->pdev);
if (rc)
dev_printk(KERN_ERR, &priv->pdev->dev,
"Failed to enable device after resume (%d)\n", rc);
dev_err(&priv->pdev->dev,
"Failed to enable device after resume (%d)\n",
rc);
else
pci_set_master(priv->pdev);
}

2
drivers/ata/pata_ns87410.c
View File

@ -86,7 +86,7 @@ static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev)
idefr &= ~0x04;
if (ata_timing_compute(adev, adev->pio_mode, &at, 30303, 1) < 0) {
dev_printk(KERN_ERR, &pdev->dev, "unknown mode %d.\n", adev->pio_mode);
dev_err(&pdev->dev, "unknown mode %d\n", adev->pio_mode);
return;
}

2
drivers/ata/pata_pdc2027x.c
View File

@ -655,7 +655,7 @@ static int pdc_hardware_init(struct ata_host *host, unsigned int board_idx)
*/
pll_clock = pdc_detect_pll_input_clock(host);
dev_printk(KERN_INFO, host->dev, "PLL input clock %ld kHz\n", pll_clock/1000);
dev_info(host->dev, "PLL input clock %ld kHz\n", pll_clock/1000);
/* Adjust PLL control register */
pdc_adjust_pll(host, pll_clock, board_idx);

6
drivers/ata/pata_sl82c105.c
View File

@ -317,9 +317,11 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
rev = sl82c105_bridge_revision(dev);
if (rev == -1)
dev_printk(KERN_WARNING, &dev->dev, "pata_sl82c105: Unable to find bridge, disabling DMA.\n");
dev_warn(&dev->dev,
"pata_sl82c105: Unable to find bridge, disabling DMA\n");
else if (rev <= 5)
dev_printk(KERN_WARNING, &dev->dev, "pata_sl82c105: Early bridge revision, no DMA available.\n");
dev_warn(&dev->dev,
"pata_sl82c105: Early bridge revision, no DMA available\n");
else
ppi[0] = &info_dma;

6
drivers/ata/pdc_adma.c
View File

@ -596,14 +596,12 @@ static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit DMA enable failed\n");
dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit consistent DMA enable failed\n");
dev_err(&pdev->dev, "32-bit consistent DMA enable failed\n");
return rc;
}
return 0;

14
drivers/ata/sata_fsl.c
View File

@ -661,8 +661,7 @@ static int sata_fsl_port_start(struct ata_port *ap)
sata_fsl_scr_write(&ap->link, SCR_CONTROL, temp);
sata_fsl_scr_read(&ap->link, SCR_CONTROL, &temp);
dev_printk(KERN_WARNING, dev, "scr_control, speed limited to %x\n",
temp);
dev_warn(dev, "scr_control, speed limited to %x\n", temp);
#endif
return 0;
@ -1202,8 +1201,7 @@ static irqreturn_t sata_fsl_interrupt(int irq, void *dev_instance)
if (ap) {
sata_fsl_host_intr(ap);
} else {
dev_printk(KERN_WARNING, host->dev,
"interrupt on disabled port 0\n");
dev_warn(host->dev, "interrupt on disabled port 0\n");
}
iowrite32(interrupt_enables, hcr_base + HSTATUS);
@ -1317,8 +1315,7 @@ static int sata_fsl_probe(struct platform_device *ofdev)
struct ata_port_info pi = sata_fsl_port_info[0];
const struct ata_port_info *ppi[] = { &pi, NULL };
dev_printk(KERN_INFO, &ofdev->dev,
"Sata FSL Platform/CSB Driver init\n");
dev_info(&ofdev->dev, "Sata FSL Platform/CSB Driver init\n");
hcr_base = of_iomap(ofdev->dev.of_node, 0);
if (!hcr_base)
@ -1347,7 +1344,7 @@ static int sata_fsl_probe(struct platform_device *ofdev)
irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
if (irq < 0) {
dev_printk(KERN_ERR, &ofdev->dev, "invalid irq from platform\n");
dev_err(&ofdev->dev, "invalid irq from platform\n");
goto error_exit_with_cleanup;
}
host_priv->irq = irq;
@ -1422,8 +1419,7 @@ static int sata_fsl_resume(struct platform_device *op)
ret = sata_fsl_init_controller(host);
if (ret) {
dev_printk(KERN_ERR, &op->dev,
"Error initialize hardware\n");
dev_err(&op->dev, "Error initializing hardware\n");
return ret;
}

12
drivers/ata/sata_inic162x.c
View File

@ -847,15 +847,13 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* Set dma_mask. This devices doesn't support 64bit addressing. */
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit DMA enable failed\n");
dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit consistent DMA enable failed\n");
dev_err(&pdev->dev, "32-bit consistent DMA enable failed\n");
return rc;
}
@ -866,15 +864,13 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
*/
rc = pci_set_dma_max_seg_size(pdev, 65536 - 512);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"failed to set the maximum segment size.\n");
dev_err(&pdev->dev, "failed to set the maximum segment size\n");
return rc;
}
rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"failed to initialize controller\n");
dev_err(&pdev->dev, "failed to initialize controller\n");
return rc;
}

49
drivers/ata/sata_mv.c
View File

@ -2930,8 +2930,7 @@ static int mv_pci_error(struct ata_host *host, void __iomem *mmio)
err_cause = readl(mmio + hpriv->irq_cause_offset);
dev_printk(KERN_ERR, host->dev, "PCI ERROR; PCI IRQ cause=0x%08x\n",
err_cause);
dev_err(host->dev, "PCI ERROR; PCI IRQ cause=0x%08x\n", err_cause);
DPRINTK("All regs @ PCI error\n");
mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev));
@ -3760,8 +3759,8 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
hp_flags |= MV_HP_ERRATA_50XXB2;
break;
default:
dev_printk(KERN_WARNING, &pdev->dev,
"Applying 50XXB2 workarounds to unknown rev\n");
dev_warn(&pdev->dev,
"Applying 50XXB2 workarounds to unknown rev\n");
hp_flags |= MV_HP_ERRATA_50XXB2;
break;
}
@ -3780,8 +3779,8 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
hp_flags |= MV_HP_ERRATA_50XXB2;
break;
default:
dev_printk(KERN_WARNING, &pdev->dev,
"Applying B2 workarounds to unknown rev\n");
dev_warn(&pdev->dev,
"Applying B2 workarounds to unknown rev\n");
hp_flags |= MV_HP_ERRATA_50XXB2;
break;
}
@ -3801,8 +3800,8 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
hp_flags |= MV_HP_ERRATA_60X1C0;
break;
default:
dev_printk(KERN_WARNING, &pdev->dev,
"Applying B2 workarounds to unknown rev\n");
dev_warn(&pdev->dev,
"Applying B2 workarounds to unknown rev\n");
hp_flags |= MV_HP_ERRATA_60X1B2;
break;
}
@ -3851,8 +3850,8 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
hp_flags |= MV_HP_ERRATA_60X1C0;
break;
default:
dev_printk(KERN_WARNING, &pdev->dev,
"Applying 60X1C0 workarounds to unknown rev\n");
dev_warn(&pdev->dev,
"Applying 60X1C0 workarounds to unknown rev\n");
hp_flags |= MV_HP_ERRATA_60X1C0;
break;
}
@ -3867,8 +3866,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
break;
default:
dev_printk(KERN_ERR, host->dev,
"BUG: invalid board index %u\n", board_idx);
dev_err(host->dev, "BUG: invalid board index %u\n", board_idx);
return 1;
}
@ -4033,7 +4031,7 @@ static int mv_platform_probe(struct platform_device *pdev)
int n_ports, rc;
if (!printed_version++)
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
dev_info(&pdev->dev, "version " DRV_VERSION "\n");
/*
* Simple resource validation ..
@ -4091,9 +4089,8 @@ static int mv_platform_probe(struct platform_device *pdev)
if (rc)
goto err;
dev_printk(KERN_INFO, &pdev->dev,
"slots %u ports %d\n", (unsigned)MV_MAX_Q_DEPTH,
host->n_ports);
dev_info(&pdev->dev, "slots %u ports %d\n",
(unsigned)MV_MAX_Q_DEPTH, host->n_ports);
return ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt,
IRQF_SHARED, &mv6_sht);
@ -4217,22 +4214,21 @@ static int pci_go_64(struct pci_dev *pdev)
if (rc) {
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"64-bit DMA enable failed\n");
dev_err(&pdev->dev,
"64-bit DMA enable failed\n");
return rc;
}
}
} else {
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit DMA enable failed\n");
dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit consistent DMA enable failed\n");
dev_err(&pdev->dev,
"32-bit consistent DMA enable failed\n");
return rc;
}
}
@ -4276,10 +4272,9 @@ static void mv_print_info(struct ata_host *host)
else
gen = "?";
dev_printk(KERN_INFO, &pdev->dev,
"Gen-%s %u slots %u ports %s mode IRQ via %s\n",
gen, (unsigned)MV_MAX_Q_DEPTH, host->n_ports,
scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx");
dev_info(&pdev->dev, "Gen-%s %u slots %u ports %s mode IRQ via %s\n",
gen, (unsigned)MV_MAX_Q_DEPTH, host->n_ports,
scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx");
}
/**
@ -4301,7 +4296,7 @@ static int mv_pci_init_one(struct pci_dev *pdev,
int n_ports, port, rc;
if (!printed_version++)
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
dev_info(&pdev->dev, "version " DRV_VERSION "\n");
/* allocate host */
n_ports = mv_get_hc_count(ppi[0]->flags) * MV_PORTS_PER_HC;

6
drivers/ata/sata_nv.c
View File

@ -2382,10 +2382,10 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* determine type and allocate host */
if (type == CK804 && adma_enabled) {
dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n");
dev_notice(&pdev->dev, "Using ADMA mode\n");
type = ADMA;
} else if (type == MCP5x && swncq_enabled) {
dev_printk(KERN_NOTICE, &pdev->dev, "Using SWNCQ mode\n");
dev_notice(&pdev->dev, "Using SWNCQ mode\n");
type = SWNCQ;
}
@ -2429,7 +2429,7 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
nv_swncq_host_init(host);
if (msi_enabled) {
dev_printk(KERN_NOTICE, &pdev->dev, "Using MSI\n");
dev_notice(&pdev->dev, "Using MSI\n");
pci_enable_msi(pdev);
}

2
drivers/ata/sata_promise.c
View File

@ -1217,7 +1217,7 @@ static int pdc_ata_init_one(struct pci_dev *pdev,
host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
if (!host) {
dev_printk(KERN_ERR, &pdev->dev, "failed to allocate host\n");
dev_err(&pdev->dev, "failed to allocate host\n");
return -ENOMEM;
}
host->iomap = pcim_iomap_table(pdev);

9
drivers/ata/sata_qstor.c
View File

@ -563,21 +563,20 @@ static int qs_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
if (rc) {
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"64-bit DMA enable failed\n");
dev_err(&pdev->dev,
"64-bit DMA enable failed\n");
return rc;
}
}
} else {
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit DMA enable failed\n");
dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
dev_err(&pdev->dev,
"32-bit consistent DMA enable failed\n");
return rc;
}

9
drivers/ata/sata_sil.c
View File

@ -676,8 +676,8 @@ static void sil_init_controller(struct ata_host *host)
writew(cls << 8 | cls,
mmio_base + sil_port[i].fifo_cfg);
} else
dev_printk(KERN_WARNING, &pdev->dev,
"cache line size not set. Driver may not function\n");
dev_warn(&pdev->dev,
"cache line size not set. Driver may not function\n");
/* Apply R_ERR on DMA activate FIS errata workaround */
if (host->ports[0]->flags & SIL_FLAG_RERR_ON_DMA_ACT) {
@ -688,9 +688,8 @@ static void sil_init_controller(struct ata_host *host)
if ((tmp & 0x3) != 0x01)
continue;
if (!cnt)
dev_printk(KERN_INFO, &pdev->dev,
"Applying R_ERR on DMA activate "
"FIS errata fix\n");
dev_info(&pdev->dev,
"Applying R_ERR on DMA activate FIS errata fix\n");
writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg);
cnt++;
}

22
drivers/ata/sata_sil24.c
View File

@ -1256,8 +1256,8 @@ static void sil24_init_controller(struct ata_host *host)
PORT_CS_PORT_RST,
PORT_CS_PORT_RST, 10, 100);
if (tmp & PORT_CS_PORT_RST)
dev_printk(KERN_ERR, host->dev,
"failed to clear port RST\n");
dev_err(host->dev,
"failed to clear port RST\n");
}
/* configure port */
@ -1302,9 +1302,8 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (pi.flags & SIL24_FLAG_PCIX_IRQ_WOC) {
tmp = readl(iomap[SIL24_HOST_BAR] + HOST_CTRL);
if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL))
dev_printk(KERN_INFO, &pdev->dev,
"Applying completion IRQ loss on PCI-X "
"errata fix\n");
dev_info(&pdev->dev,
"Applying completion IRQ loss on PCI-X errata fix\n");
else
pi.flags &= ~SIL24_FLAG_PCIX_IRQ_WOC;
}
@ -1322,22 +1321,21 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (rc) {
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"64-bit DMA enable failed\n");
dev_err(&pdev->dev,
"64-bit DMA enable failed\n");
return rc;
}
}
} else {
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit DMA enable failed\n");
dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit consistent DMA enable failed\n");
dev_err(&pdev->dev,
"32-bit consistent DMA enable failed\n");
return rc;
}
}
@ -1350,7 +1348,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
sil24_init_controller(host);
if (sata_sil24_msi && !pci_enable_msi(pdev)) {
dev_printk(KERN_INFO, &pdev->dev, "Using MSI\n");
dev_info(&pdev->dev, "Using MSI\n");
pci_intx(pdev, 0);
}

24
drivers/ata/sata_sis.c
View File

@ -203,7 +203,7 @@ static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
int i, rc;
if (!printed_version++)
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
dev_info(&pdev->dev, "version " DRV_VERSION "\n");
rc = pcim_enable_device(pdev);
if (rc)
@ -241,12 +241,12 @@ static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
break;
}
if ((pmr & SIS_PMR_COMBINED) == 0) {
dev_printk(KERN_INFO, &pdev->dev,
"Detected SiS 180/181/964 chipset in SATA mode\n");
dev_info(&pdev->dev,
"Detected SiS 180/181/964 chipset in SATA mode\n");
port2_start = 64;
} else {
dev_printk(KERN_INFO, &pdev->dev,
"Detected SiS 180/181 chipset in combined mode\n");
dev_info(&pdev->dev,
"Detected SiS 180/181 chipset in combined mode\n");
port2_start = 0;
pi.flags |= ATA_FLAG_SLAVE_POSS;
}
@ -256,24 +256,22 @@ static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
case 0x0183:
pci_read_config_dword(pdev, 0x6C, &val);
if (val & (1L << 31)) {
dev_printk(KERN_INFO, &pdev->dev,
"Detected SiS 182/965 chipset\n");
dev_info(&pdev->dev, "Detected SiS 182/965 chipset\n");
pi.flags |= ATA_FLAG_SLAVE_POSS;
} else {
dev_printk(KERN_INFO, &pdev->dev,
"Detected SiS 182/965L chipset\n");
dev_info(&pdev->dev, "Detected SiS 182/965L chipset\n");
}
break;
case 0x1182:
dev_printk(KERN_INFO, &pdev->dev,
"Detected SiS 1182/966/680 SATA controller\n");
dev_info(&pdev->dev,
"Detected SiS 1182/966/680 SATA controller\n");
pi.flags |= ATA_FLAG_SLAVE_POSS;
break;
case 0x1183:
dev_printk(KERN_INFO, &pdev->dev,
"Detected SiS 1183/966/966L/968/680 controller in PATA mode\n");
dev_info(&pdev->dev,
"Detected SiS 1183/966/966L/968/680 controller in PATA mode\n");
ppi[0] = &sis_info133_for_sata;
ppi[1] = &sis_info133_for_sata;
break;

2
drivers/ata/sata_uli.c
View File

@ -155,7 +155,7 @@ static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
int n_ports, rc;
if (!printed_version++)
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
dev_info(&pdev->dev, "version " DRV_VERSION "\n");
rc = pcim_enable_device(pdev);
if (rc)

16
drivers/ata/sata_via.c
View File

@ -469,7 +469,7 @@ static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n");
dev_err(&pdev->dev, "failed to iomap PCI BAR 5\n");
return rc;
}
@ -488,14 +488,14 @@ static int vt6421_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
*r_host = host = ata_host_alloc_pinfo(&pdev->dev, ppi, ARRAY_SIZE(ppi));
if (!host) {
dev_printk(KERN_ERR, &pdev->dev, "failed to allocate host\n");
dev_err(&pdev->dev, "failed to allocate host\n");
return -ENOMEM;
}
rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev, "failed to request/iomap "
"PCI BARs (errno=%d)\n", rc);
dev_err(&pdev->dev, "failed to request/iomap PCI BARs (errno=%d)\n",
rc);
return rc;
}
host->iomap = pcim_iomap_table(pdev);
@ -526,7 +526,7 @@ static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n");
dev_err(&pdev->dev, "failed to iomap PCI BAR 5\n");
return rc;
}
@ -542,8 +542,8 @@ static void svia_configure(struct pci_dev *pdev, int board_id)
u8 tmp8;
pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8);
dev_printk(KERN_INFO, &pdev->dev, "routed to hard irq line %d\n",
(int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f);
dev_info(&pdev->dev, "routed to hard irq line %d\n",
(int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f);
/* make sure SATA channels are enabled */
pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8);
@ -628,7 +628,7 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++)
if ((pci_resource_start(pdev, i) == 0) ||
(pci_resource_len(pdev, i) < bar_sizes[i])) {
dev_printk(KERN_ERR, &pdev->dev,
dev_err(&pdev->dev,
"invalid PCI BAR %u (sz 0x%llx, val 0x%llx)\n",
i,
(unsigned long long)pci_resource_start(pdev, i),

5
drivers/ata/sata_vsc.c
View File

@ -273,9 +273,8 @@ static irqreturn_t vsc_sata_interrupt(int irq, void *dev_instance)
if (unlikely(status == 0xffffffff || status == 0)) {
if (status)
dev_printk(KERN_ERR, host->dev,
": IRQ status == 0xffffffff, "
"PCI fault or device removal?\n");
dev_err(host->dev,
": IRQ status == 0xffffffff, PCI fault or device removal?\n");
goto out;
}