ALSA: bebob: Send a cue to load firmware for M-Audio Firewire series
Just powering on, these devices below wait to download firmware. - Firewire Audiophile - Firewire 410 - Firewire 1814 - ProjectMix I/O But firmware version 5058 or later, flash memory in the device stores the firmware. So this driver can enable these devices by sending a certain cue to load the firmware. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
parent
c495a4a36e
commit
a2b2a7798f
|
@ -177,18 +177,21 @@ bebob_probe(struct fw_unit *unit,
|
|||
}
|
||||
|
||||
if ((entry->vendor_id == VEN_FOCUSRITE) &&
|
||||
(entry->model_id == MODEL_FOCUSRITE_SAFFIRE_BOTH)) {
|
||||
(entry->model_id == MODEL_FOCUSRITE_SAFFIRE_BOTH))
|
||||
spec = get_saffire_spec(unit);
|
||||
} else if ((entry->vendor_id == VEN_MAUDIO1) &&
|
||||
(entry->model_id == MODEL_MAUDIO_AUDIOPHILE_BOTH) &&
|
||||
!check_audiophile_booted(unit)) {
|
||||
err = 0;
|
||||
goto end;
|
||||
} else {
|
||||
else if ((entry->vendor_id == VEN_MAUDIO1) &&
|
||||
(entry->model_id == MODEL_MAUDIO_AUDIOPHILE_BOTH) &&
|
||||
!check_audiophile_booted(unit))
|
||||
spec = NULL;
|
||||
else
|
||||
spec = (const struct snd_bebob_spec *)entry->driver_data;
|
||||
}
|
||||
|
||||
if (spec == NULL) {
|
||||
err = -ENOSYS;
|
||||
if ((entry->vendor_id == VEN_MAUDIO1) ||
|
||||
(entry->vendor_id == VEN_MAUDIO2))
|
||||
err = snd_bebob_maudio_load_firmware(unit);
|
||||
else
|
||||
err = -ENOSYS;
|
||||
goto end;
|
||||
}
|
||||
|
||||
|
@ -374,6 +377,7 @@ static const struct ieee1394_device_id bebob_id_table[] = {
|
|||
SND_BEBOB_DEV_ENTRY(VEN_FOCUSRITE, MODEL_FOCUSRITE_SAFFIRE_BOTH,
|
||||
&saffire_spec),
|
||||
/* M-Audio, Firewire 410 */
|
||||
SND_BEBOB_DEV_ENTRY(VEN_MAUDIO2, 0x00010058, NULL), /* bootloader */
|
||||
SND_BEBOB_DEV_ENTRY(VEN_MAUDIO2, 0x00010046, &maudio_fw410_spec),
|
||||
/* M-Audio, Firewire Audiophile */
|
||||
SND_BEBOB_DEV_ENTRY(VEN_MAUDIO1, MODEL_MAUDIO_AUDIOPHILE_BOTH,
|
||||
|
@ -387,6 +391,7 @@ static const struct ieee1394_device_id bebob_id_table[] = {
|
|||
/* M-Audio, ProFireLightbridge */
|
||||
SND_BEBOB_DEV_ENTRY(VEN_MAUDIO1, 0x000100a1, &spec_normal),
|
||||
/* Firewire 1814 */
|
||||
SND_BEBOB_DEV_ENTRY(VEN_MAUDIO1, 0x00010070, NULL), /* bootloader */
|
||||
SND_BEBOB_DEV_ENTRY(VEN_MAUDIO1, MODEL_MAUDIO_FW1814,
|
||||
&maudio_special_spec),
|
||||
/* M-Audio ProjectMix */
|
||||
|
|
|
@ -242,6 +242,7 @@ extern struct snd_bebob_spec maudio_ozonic_spec;
|
|||
extern struct snd_bebob_spec maudio_nrv10_spec;
|
||||
extern struct snd_bebob_spec maudio_special_spec;
|
||||
int snd_bebob_maudio_special_discover(struct snd_bebob *bebob, bool is1814);
|
||||
int snd_bebob_maudio_load_firmware(struct fw_unit *unit);
|
||||
|
||||
#define SND_BEBOB_DEV_ENTRY(vendor, model, data) \
|
||||
{ \
|
||||
|
|
|
@ -16,6 +16,10 @@
|
|||
* settings when completing uploading. Then these devices generate bus reset
|
||||
* and are recognized as new devices with the firmware.
|
||||
*
|
||||
* But with firmware version 5058 or later, the firmware is stored to flash
|
||||
* memory in the device and drivers can tell bootloader to load the firmware
|
||||
* by sending a cue. This cue must be sent one time.
|
||||
*
|
||||
* For streaming, both of output and input streams are needed for Firewire 410
|
||||
* and Ozonic. The single stream is OK for the other devices even if the clock
|
||||
* source is not SYT-Match (I note no devices use SYT-Match).
|
||||
|
@ -31,6 +35,20 @@
|
|||
* functionality is between 0xffc700700000 to 0xffc70070009c.
|
||||
*/
|
||||
|
||||
/* Offset from information register */
|
||||
#define INFO_OFFSET_SW_DATE 0x20
|
||||
|
||||
/* Bootloader Protocol Version 1 */
|
||||
#define MAUDIO_BOOTLOADER_CUE1 0x00000001
|
||||
/*
|
||||
* Initializing configuration to factory settings (= 0x1101), (swapped in line),
|
||||
* Command code is zero (= 0x00),
|
||||
* the number of operands is zero (= 0x00)(at least significant byte)
|
||||
*/
|
||||
#define MAUDIO_BOOTLOADER_CUE2 0x01110000
|
||||
/* padding */
|
||||
#define MAUDIO_BOOTLOADER_CUE3 0x00000000
|
||||
|
||||
#define MAUDIO_SPECIFIC_ADDRESS 0xffc700000000
|
||||
|
||||
#define METER_OFFSET 0x00600000
|
||||
|
@ -67,6 +85,52 @@ struct special_params {
|
|||
struct snd_ctl_elem_id *ctl_id_sync;
|
||||
};
|
||||
|
||||
/*
|
||||
* For some M-Audio devices, this module just send cue to load firmware. After
|
||||
* loading, the device generates bus reset and newly detected.
|
||||
*
|
||||
* If we make any transactions to load firmware, the operation may failed.
|
||||
*/
|
||||
int snd_bebob_maudio_load_firmware(struct fw_unit *unit)
|
||||
{
|
||||
struct fw_device *device = fw_parent_device(unit);
|
||||
int err, rcode;
|
||||
u64 date;
|
||||
__be32 cues[3] = {
|
||||
MAUDIO_BOOTLOADER_CUE1,
|
||||
MAUDIO_BOOTLOADER_CUE2,
|
||||
MAUDIO_BOOTLOADER_CUE3
|
||||
};
|
||||
|
||||
/* check date of software used to build */
|
||||
err = snd_bebob_read_block(unit, INFO_OFFSET_SW_DATE,
|
||||
&date, sizeof(u64));
|
||||
if (err < 0)
|
||||
goto end;
|
||||
/*
|
||||
* firmware version 5058 or later has date later than "20070401", but
|
||||
* 'date' is not null-terminated.
|
||||
*/
|
||||
if (date < 0x3230303730343031) {
|
||||
dev_err(&unit->device,
|
||||
"Use firmware version 5058 or later\n");
|
||||
err = -ENOSYS;
|
||||
goto end;
|
||||
}
|
||||
|
||||
rcode = fw_run_transaction(device->card, TCODE_WRITE_BLOCK_REQUEST,
|
||||
device->node_id, device->generation,
|
||||
device->max_speed, BEBOB_ADDR_REG_REQ,
|
||||
cues, sizeof(cues));
|
||||
if (rcode != RCODE_COMPLETE) {
|
||||
dev_err(&unit->device,
|
||||
"Failed to send a cue to load firmware\n");
|
||||
err = -EIO;
|
||||
}
|
||||
end:
|
||||
return err;
|
||||
}
|
||||
|
||||
static inline int
|
||||
get_meter(struct snd_bebob *bebob, void *buf, unsigned int size)
|
||||
{
|
||||
|
|
Loading…
Reference in New Issue