From a1ead2ec3c098d2f94b8de8bb3f1929d27e9e7d5 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Wed, 23 Jan 2019 20:47:30 +0100 Subject: [PATCH] r8169: factor out PHY init sequence adjusting 10M and ALDPS Few chip versions use the same sequence to adjust 10M and ALDPS, so let's factor it out. This patch also fixes a (most likely) typo in rtl8168g_1_hw_phy_config. There bit 8 in reg 0x14 on page 0x0bcc was set and not cleared. According to the vendor driver this bit needs to be cleared in all cases. Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 49 ++++++++++++---------------- 1 file changed, 21 insertions(+), 28 deletions(-) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 74d093cfeabb..83c4663e6cd3 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -3372,6 +3372,24 @@ static void rtl8168g_disable_aldps(struct rtl8169_private *tp) phy_clear_bits(tp->phydev, 0x10, BIT(2)); } +static void rtl8168g_phy_adjust_10m_aldps(struct rtl8169_private *tp) +{ + struct phy_device *phydev = tp->phydev; + + phy_write(phydev, 0x1f, 0x0bcc); + phy_clear_bits(phydev, 0x14, BIT(8)); + + phy_write(phydev, 0x1f, 0x0a44); + phy_set_bits(phydev, 0x11, BIT(7) | BIT(6)); + + phy_write(phydev, 0x1f, 0x0a43); + phy_write(phydev, 0x13, 0x8084); + phy_clear_bits(phydev, 0x14, BIT(14) | BIT(13)); + phy_set_bits(phydev, 0x10, BIT(12) | BIT(1) | BIT(0)); + + phy_write(phydev, 0x1f, 0x0000); +} + static void rtl8168g_1_hw_phy_config(struct rtl8169_private *tp) { rtl_apply_firmware(tp); @@ -3398,14 +3416,7 @@ static void rtl8168g_1_hw_phy_config(struct rtl8169_private *tp) rtl_writephy(tp, 0x1f, 0x0a44); rtl_w0w1_phy(tp, 0x11, 0x000c, 0x0000); - rtl_writephy(tp, 0x1f, 0x0bcc); - rtl_w0w1_phy(tp, 0x14, 0x0100, 0x0000); - rtl_writephy(tp, 0x1f, 0x0a44); - rtl_w0w1_phy(tp, 0x11, 0x00c0, 0x0000); - rtl_writephy(tp, 0x1f, 0x0a43); - rtl_writephy(tp, 0x13, 0x8084); - rtl_w0w1_phy(tp, 0x14, 0x0000, 0x6000); - rtl_w0w1_phy(tp, 0x10, 0x1003, 0x0000); + rtl8168g_phy_adjust_10m_aldps(tp); /* EEE auto-fallback function */ rtl_writephy(tp, 0x1f, 0x0a4b); @@ -3624,16 +3635,7 @@ static void rtl8168ep_1_hw_phy_config(struct rtl8169_private *tp) rtl_w0w1_phy(tp, 0x11, 0x000c, 0x0000); rtl_writephy(tp, 0x1f, 0x0000); - /* patch 10M & ALDPS */ - rtl_writephy(tp, 0x1f, 0x0bcc); - rtl_w0w1_phy(tp, 0x14, 0x0000, 0x0100); - rtl_writephy(tp, 0x1f, 0x0a44); - rtl_w0w1_phy(tp, 0x11, 0x00c0, 0x0000); - rtl_writephy(tp, 0x1f, 0x0a43); - rtl_writephy(tp, 0x13, 0x8084); - rtl_w0w1_phy(tp, 0x14, 0x0000, 0x6000); - rtl_w0w1_phy(tp, 0x10, 0x1003, 0x0000); - rtl_writephy(tp, 0x1f, 0x0000); + rtl8168g_phy_adjust_10m_aldps(tp); /* Enable EEE auto-fallback function */ rtl_writephy(tp, 0x1f, 0x0a4b); @@ -3658,16 +3660,7 @@ static void rtl8168ep_1_hw_phy_config(struct rtl8169_private *tp) static void rtl8168ep_2_hw_phy_config(struct rtl8169_private *tp) { - /* patch 10M & ALDPS */ - rtl_writephy(tp, 0x1f, 0x0bcc); - rtl_w0w1_phy(tp, 0x14, 0x0000, 0x0100); - rtl_writephy(tp, 0x1f, 0x0a44); - rtl_w0w1_phy(tp, 0x11, 0x00c0, 0x0000); - rtl_writephy(tp, 0x1f, 0x0a43); - rtl_writephy(tp, 0x13, 0x8084); - rtl_w0w1_phy(tp, 0x14, 0x0000, 0x6000); - rtl_w0w1_phy(tp, 0x10, 0x1003, 0x0000); - rtl_writephy(tp, 0x1f, 0x0000); + rtl8168g_phy_adjust_10m_aldps(tp); /* Enable UC LPF tune function */ rtl_writephy(tp, 0x1f, 0x0a43);