regulator: Fixes for v5.11

A few minor driver specific fixes, mostly DT bindings document bits,
 plus a new device ID.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl/3Pe0ACgkQJNaLcl1U
 h9Cigwf/QVwn08GK8+fsRCRWT/VffFeK2u9QlgUvqRLy8gFoU/GE2GczbU7yOBmy
 ELYHxuXBBGXU2tX5o0xE280KzPsRN5IFHRpj5HOGvdtpzaL4ch2xomVttzXoPaCQ
 i16YcTD5AR+yzYhnY/SWExgVpNx5qbYdYEuYBHf0v1jTF/L+eH5YKYBJibgzMooy
 tfSNFM8Ie6d1b8UUbMETdaA7UHd0QIqphJj11DFsNJ4wfH+CqjMqI11hTImADTJK
 tng15k+I9R3kE57I79Cdzpcd2/yl4eyTNbRbqx7non1nMQMx0tsN/wQk5mD2JVXM
 uYY6Xb2enz2lloNCcGiQLFmgRvXWBw==
 =sZgX
 -----END PGP SIGNATURE-----

Merge tag 'regulator-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A few minor driver specific fixes, mostly DT bindings document bits,
  plus a new device ID"

* tag 'regulator-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: qcom-rpmh: add QCOM_COMMAND_DB dependency
  regulator: qcom-rpmh-regulator: correct hfsmps515 definition
  dt-bindings: regulator: qcom,rpmh-regulator: add pm8009 revision
  regulator: bd718x7: Add enable times
  regulator: pf8x00: Use specific compatible strings for devices
This commit is contained in:
Linus Torvalds 2021-01-07 12:18:22 -08:00
commit a1a7b4f324
6 changed files with 70 additions and 5 deletions

View File

@ -19,7 +19,9 @@ description: |
properties:
compatible:
enum:
- nxp,pf8x00
- nxp,pf8100
- nxp,pf8121a
- nxp,pf8200
reg:
maxItems: 1
@ -118,7 +120,7 @@ examples:
#size-cells = <0>;
pmic@8 {
compatible = "nxp,pf8x00";
compatible = "nxp,pf8100";
reg = <0x08>;
regulators {

View File

@ -44,6 +44,7 @@ First Level Nodes - PMIC
Definition: Must be one of below:
"qcom,pm8005-rpmh-regulators"
"qcom,pm8009-rpmh-regulators"
"qcom,pm8009-1-rpmh-regulators"
"qcom,pm8150-rpmh-regulators"
"qcom,pm8150l-rpmh-regulators"
"qcom,pm8350-rpmh-regulators"

View File

@ -881,6 +881,7 @@ config REGULATOR_QCOM_RPM
config REGULATOR_QCOM_RPMH
tristate "Qualcomm Technologies, Inc. RPMh regulator driver"
depends on QCOM_RPMH || (QCOM_RPMH=n && COMPILE_TEST)
depends on QCOM_COMMAND_DB || (QCOM_COMMAND_DB=n && COMPILE_TEST)
help
This driver supports control of PMIC regulators via the RPMh hardware
block found on Qualcomm Technologies Inc. SoCs. RPMh regulator

View File

@ -15,6 +15,36 @@
#include <linux/regulator/of_regulator.h>
#include <linux/slab.h>
/* Typical regulator startup times as per data sheet in uS */
#define BD71847_BUCK1_STARTUP_TIME 144
#define BD71847_BUCK2_STARTUP_TIME 162
#define BD71847_BUCK3_STARTUP_TIME 162
#define BD71847_BUCK4_STARTUP_TIME 240
#define BD71847_BUCK5_STARTUP_TIME 270
#define BD71847_BUCK6_STARTUP_TIME 200
#define BD71847_LDO1_STARTUP_TIME 440
#define BD71847_LDO2_STARTUP_TIME 370
#define BD71847_LDO3_STARTUP_TIME 310
#define BD71847_LDO4_STARTUP_TIME 400
#define BD71847_LDO5_STARTUP_TIME 530
#define BD71847_LDO6_STARTUP_TIME 400
#define BD71837_BUCK1_STARTUP_TIME 160
#define BD71837_BUCK2_STARTUP_TIME 180
#define BD71837_BUCK3_STARTUP_TIME 180
#define BD71837_BUCK4_STARTUP_TIME 180
#define BD71837_BUCK5_STARTUP_TIME 160
#define BD71837_BUCK6_STARTUP_TIME 240
#define BD71837_BUCK7_STARTUP_TIME 220
#define BD71837_BUCK8_STARTUP_TIME 200
#define BD71837_LDO1_STARTUP_TIME 440
#define BD71837_LDO2_STARTUP_TIME 370
#define BD71837_LDO3_STARTUP_TIME 310
#define BD71837_LDO4_STARTUP_TIME 400
#define BD71837_LDO5_STARTUP_TIME 310
#define BD71837_LDO6_STARTUP_TIME 400
#define BD71837_LDO7_STARTUP_TIME 530
/*
* BD718(37/47/50) have two "enable control modes". ON/OFF can either be
* controlled by software - or by PMIC internal HW state machine. Whether
@ -613,6 +643,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.vsel_mask = DVS_BUCK_RUN_MASK,
.enable_reg = BD718XX_REG_BUCK1_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.enable_time = BD71847_BUCK1_STARTUP_TIME,
.owner = THIS_MODULE,
.of_parse_cb = buck_set_hw_dvs_levels,
},
@ -646,6 +677,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.vsel_mask = DVS_BUCK_RUN_MASK,
.enable_reg = BD718XX_REG_BUCK2_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.enable_time = BD71847_BUCK2_STARTUP_TIME,
.owner = THIS_MODULE,
.of_parse_cb = buck_set_hw_dvs_levels,
},
@ -680,6 +712,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.linear_range_selectors = bd71847_buck3_volt_range_sel,
.enable_reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.enable_time = BD71847_BUCK3_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@ -706,6 +739,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.vsel_range_mask = BD71847_BUCK4_RANGE_MASK,
.linear_range_selectors = bd71847_buck4_volt_range_sel,
.enable_mask = BD718XX_BUCK_EN,
.enable_time = BD71847_BUCK4_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@ -727,6 +761,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.vsel_mask = BD718XX_3RD_NODVS_BUCK_MASK,
.enable_reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.enable_time = BD71847_BUCK5_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@ -750,6 +785,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.vsel_mask = BD718XX_4TH_NODVS_BUCK_MASK,
.enable_reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.enable_time = BD71847_BUCK6_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@ -775,6 +811,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.linear_range_selectors = bd718xx_ldo1_volt_range_sel,
.enable_reg = BD718XX_REG_LDO1_VOLT,
.enable_mask = BD718XX_LDO_EN,
.enable_time = BD71847_LDO1_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@ -796,6 +833,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.n_voltages = ARRAY_SIZE(ldo_2_volts),
.enable_reg = BD718XX_REG_LDO2_VOLT,
.enable_mask = BD718XX_LDO_EN,
.enable_time = BD71847_LDO2_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@ -818,6 +856,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.vsel_mask = BD718XX_LDO3_MASK,
.enable_reg = BD718XX_REG_LDO3_VOLT,
.enable_mask = BD718XX_LDO_EN,
.enable_time = BD71847_LDO3_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@ -840,6 +879,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.vsel_mask = BD718XX_LDO4_MASK,
.enable_reg = BD718XX_REG_LDO4_VOLT,
.enable_mask = BD718XX_LDO_EN,
.enable_time = BD71847_LDO4_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@ -865,6 +905,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.linear_range_selectors = bd71847_ldo5_volt_range_sel,
.enable_reg = BD718XX_REG_LDO5_VOLT,
.enable_mask = BD718XX_LDO_EN,
.enable_time = BD71847_LDO5_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@ -889,6 +930,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.vsel_mask = BD718XX_LDO6_MASK,
.enable_reg = BD718XX_REG_LDO6_VOLT,
.enable_mask = BD718XX_LDO_EN,
.enable_time = BD71847_LDO6_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@ -942,6 +984,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = DVS_BUCK_RUN_MASK,
.enable_reg = BD718XX_REG_BUCK1_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.enable_time = BD71837_BUCK1_STARTUP_TIME,
.owner = THIS_MODULE,
.of_parse_cb = buck_set_hw_dvs_levels,
},
@ -975,6 +1018,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = DVS_BUCK_RUN_MASK,
.enable_reg = BD718XX_REG_BUCK2_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.enable_time = BD71837_BUCK2_STARTUP_TIME,
.owner = THIS_MODULE,
.of_parse_cb = buck_set_hw_dvs_levels,
},
@ -1005,6 +1049,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = DVS_BUCK_RUN_MASK,
.enable_reg = BD71837_REG_BUCK3_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.enable_time = BD71837_BUCK3_STARTUP_TIME,
.owner = THIS_MODULE,
.of_parse_cb = buck_set_hw_dvs_levels,
},
@ -1033,6 +1078,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = DVS_BUCK_RUN_MASK,
.enable_reg = BD71837_REG_BUCK4_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.enable_time = BD71837_BUCK4_STARTUP_TIME,
.owner = THIS_MODULE,
.of_parse_cb = buck_set_hw_dvs_levels,
},
@ -1065,6 +1111,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.linear_range_selectors = bd71837_buck5_volt_range_sel,
.enable_reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.enable_time = BD71837_BUCK5_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@ -1088,6 +1135,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = BD71837_BUCK6_MASK,
.enable_reg = BD718XX_REG_2ND_NODVS_BUCK_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.enable_time = BD71837_BUCK6_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@ -1109,6 +1157,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = BD718XX_3RD_NODVS_BUCK_MASK,
.enable_reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.enable_time = BD71837_BUCK7_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@ -1132,6 +1181,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = BD718XX_4TH_NODVS_BUCK_MASK,
.enable_reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.enable_time = BD71837_BUCK8_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@ -1157,6 +1207,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.linear_range_selectors = bd718xx_ldo1_volt_range_sel,
.enable_reg = BD718XX_REG_LDO1_VOLT,
.enable_mask = BD718XX_LDO_EN,
.enable_time = BD71837_LDO1_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@ -1178,6 +1229,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.n_voltages = ARRAY_SIZE(ldo_2_volts),
.enable_reg = BD718XX_REG_LDO2_VOLT,
.enable_mask = BD718XX_LDO_EN,
.enable_time = BD71837_LDO2_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@ -1200,6 +1252,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = BD718XX_LDO3_MASK,
.enable_reg = BD718XX_REG_LDO3_VOLT,
.enable_mask = BD718XX_LDO_EN,
.enable_time = BD71837_LDO3_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@ -1222,6 +1275,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = BD718XX_LDO4_MASK,
.enable_reg = BD718XX_REG_LDO4_VOLT,
.enable_mask = BD718XX_LDO_EN,
.enable_time = BD71837_LDO4_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@ -1246,6 +1300,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = BD71837_LDO5_MASK,
.enable_reg = BD718XX_REG_LDO5_VOLT,
.enable_mask = BD718XX_LDO_EN,
.enable_time = BD71837_LDO5_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@ -1272,6 +1327,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = BD718XX_LDO6_MASK,
.enable_reg = BD718XX_REG_LDO6_VOLT,
.enable_mask = BD718XX_LDO_EN,
.enable_time = BD71837_LDO6_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@ -1296,6 +1352,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = BD71837_LDO7_MASK,
.enable_reg = BD71837_REG_LDO7_VOLT,
.enable_mask = BD718XX_LDO_EN,
.enable_time = BD71837_LDO7_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {

View File

@ -469,13 +469,17 @@ static int pf8x00_i2c_probe(struct i2c_client *client)
}
static const struct of_device_id pf8x00_dt_ids[] = {
{ .compatible = "nxp,pf8x00",},
{ .compatible = "nxp,pf8100",},
{ .compatible = "nxp,pf8121a",},
{ .compatible = "nxp,pf8200",},
{ }
};
MODULE_DEVICE_TABLE(of, pf8x00_dt_ids);
static const struct i2c_device_id pf8x00_i2c_id[] = {
{ "pf8x00", 0 },
{ "pf8100", 0 },
{ "pf8121a", 0 },
{ "pf8200", 0 },
{},
};
MODULE_DEVICE_TABLE(i2c, pf8x00_i2c_id);

View File

@ -726,7 +726,7 @@ static const struct rpmh_vreg_hw_data pmic5_ftsmps510 = {
static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = {
.regulator_type = VRM,
.ops = &rpmh_regulator_vrm_ops,
.voltage_range = REGULATOR_LINEAR_RANGE(2800000, 0, 4, 1600),
.voltage_range = REGULATOR_LINEAR_RANGE(2800000, 0, 4, 16000),
.n_voltages = 5,
.pmic_mode_map = pmic_mode_map_pmic5_smps,
.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,