drm/amd/display: Revert "DP link layer test 4.2.1.1 fix due to specs update"

[why]
The change causes some regression in a common use case.
Will need more investigation before fixing the original issue.

[how]
This reverts commit fb8cf277b1.

Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit is contained in:
Wenjing Liu 2020-05-25 13:45:22 -04:00 committed by Alex Deucher
parent ed8ec123a1
commit a1500a62d0
9 changed files with 42 additions and 45 deletions

View File

@ -690,11 +690,9 @@ static bool detect_dp(struct dc_link *link,
if (sink_caps->transaction_type == DDC_TRANSACTION_TYPE_I2C_OVER_AUX) {
sink_caps->signal = SIGNAL_TYPE_DISPLAY_PORT;
dpcd_set_source_specific_data(link);
if (!detect_dp_sink_caps(link))
return false;
dpcd_set_source_specific_data(link);
if (is_mst_supported(link)) {
sink_caps->signal = SIGNAL_TYPE_DISPLAY_PORT_MST;
link->type = dc_connection_mst_branch;

View File

@ -648,17 +648,16 @@ bool dc_link_aux_transfer_with_retries(struct ddc_service *ddc,
}
bool dc_link_aux_try_to_configure_timeout(struct ddc_service *ddc,
uint32_t dc_link_aux_configure_timeout(struct ddc_service *ddc,
uint32_t timeout)
{
bool result = false;
uint32_t prev_timeout = 0;
struct ddc *ddc_pin = ddc->ddc_pin;
if (ddc->ctx->dc->res_pool->engines[ddc_pin->pin_data->en]->funcs->configure_timeout) {
ddc->ctx->dc->res_pool->engines[ddc_pin->pin_data->en]->funcs->configure_timeout(ddc, timeout);
result = true;
}
return result;
if (ddc->ctx->dc->res_pool->engines[ddc_pin->pin_data->en]->funcs->configure_timeout)
prev_timeout =
ddc->ctx->dc->res_pool->engines[ddc_pin->pin_data->en]->funcs->configure_timeout(ddc, timeout);
return prev_timeout;
}
/*test only function*/

View File

@ -245,7 +245,7 @@ static uint8_t dc_dp_initialize_scrambling_data_symbols(
static inline bool is_repeater(struct dc_link *link, uint32_t offset)
{
return (link->lttpr_non_transparent_mode && offset != 0);
return (!link->is_lttpr_mode_transparent && offset != 0);
}
static void dpcd_set_lt_pattern_and_lane_settings(
@ -1038,7 +1038,7 @@ static enum link_training_result perform_clock_recovery_sequence(
/* 3. wait receiver to lock-on*/
wait_time_microsec = lt_settings->cr_pattern_time;
if (link->lttpr_non_transparent_mode)
if (!link->is_lttpr_mode_transparent)
wait_time_microsec = TRAINING_AUX_RD_INTERVAL;
wait_for_training_aux_rd_interval(
@ -1268,7 +1268,7 @@ static void configure_lttpr_mode(struct dc_link *link)
link->dpcd_caps.lttpr_caps.mode = repeater_mode;
}
if (link->lttpr_non_transparent_mode) {
if (!link->is_lttpr_mode_transparent) {
DC_LOG_HW_LINK_TRAINING("%s\n Set LTTPR to Non Transparent Mode\n", __func__);
@ -1473,7 +1473,7 @@ enum link_training_result dc_link_dp_perform_link_training(
&lt_settings);
/* Configure lttpr mode */
if (link->lttpr_non_transparent_mode)
if (!link->is_lttpr_mode_transparent)
configure_lttpr_mode(link);
if (link->ctx->dc->work_arounds.lt_early_cr_pattern)
@ -1489,7 +1489,7 @@ enum link_training_result dc_link_dp_perform_link_training(
dp_set_fec_ready(link, fec_enable);
if (link->lttpr_non_transparent_mode) {
if (!link->is_lttpr_mode_transparent) {
/* 2. perform link training (set link training done
* to false is done as well)
@ -1757,7 +1757,7 @@ static struct dc_link_settings get_max_link_cap(struct dc_link *link)
* account for lttpr repeaters cap
* notes: repeaters do not snoop in the DPRX Capabilities addresses (3.6.3).
*/
if (link->lttpr_non_transparent_mode) {
if (!link->is_lttpr_mode_transparent) {
if (link->dpcd_caps.lttpr_caps.max_lane_count < max_link_cap.lane_count)
max_link_cap.lane_count = link->dpcd_caps.lttpr_caps.max_lane_count;
@ -1915,7 +1915,7 @@ bool dp_verify_link_cap(
max_link_cap = get_max_link_cap(link);
/* Grant extended timeout request */
if (link->lttpr_non_transparent_mode && link->dpcd_caps.lttpr_caps.max_ext_timeout > 0) {
if (!link->is_lttpr_mode_transparent && link->dpcd_caps.lttpr_caps.max_ext_timeout > 0) {
uint8_t grant = link->dpcd_caps.lttpr_caps.max_ext_timeout & 0x80;
core_link_write_dpcd(link, DP_PHY_REPEATER_EXTENDED_WAIT_TIMEOUT, &grant, sizeof(grant));
@ -3248,7 +3248,17 @@ static bool retrieve_link_cap(struct dc_link *link)
uint32_t read_dpcd_retry_cnt = 3;
int i;
struct dp_sink_hw_fw_revision dp_hw_fw_revision;
bool is_lttpr_present = false;
/* Set default timeout to 3.2ms and read LTTPR capabilities */
bool ext_timeout_support = link->dc->caps.extended_aux_timeout_support &&
!link->dc->config.disable_extended_timeout_support;
link->is_lttpr_mode_transparent = true;
if (ext_timeout_support) {
dc_link_aux_configure_timeout(link->ddc,
LINK_AUX_DEFAULT_EXTENDED_TIMEOUT_PERIOD);
}
memset(dpcd_data, '\0', sizeof(dpcd_data));
memset(lttpr_dpcd_data, '\0', sizeof(lttpr_dpcd_data));
@ -3257,13 +3267,6 @@ static bool retrieve_link_cap(struct dc_link *link)
memset(&edp_config_cap, '\0',
sizeof(union edp_configuration_cap));
/* if extended timeout is supported in hardware,
* default to LTTPR timeout (3.2ms) first as a W/A for DP link layer
* CTS 4.2.1.1 regression introduced by CTS specs requirement update.
*/
dc_link_aux_try_to_configure_timeout(link->ddc,
LINK_AUX_DEFAULT_LTTPR_TIMEOUT_PERIOD);
status = core_link_read_dpcd(link, DP_SET_POWER,
&dpcd_power_state, sizeof(dpcd_power_state));
@ -3290,9 +3293,8 @@ static bool retrieve_link_cap(struct dc_link *link)
return false;
}
if (link->dc->caps.extended_aux_timeout_support) {
/* By reading LTTPR capability, RX assumes that we will enable LTTPR extended aux timeout if LTTPR is present.
* Therefore, only query LTTPR capability when LTTPR extended aux timeout is supported by hardware */
if (ext_timeout_support) {
status = core_link_read_dpcd(
link,
DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV,
@ -3323,21 +3325,20 @@ static bool retrieve_link_cap(struct dc_link *link)
lttpr_dpcd_data[DP_PHY_REPEATER_EXTENDED_WAIT_TIMEOUT -
DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV];
is_lttpr_present = (link->dpcd_caps.lttpr_caps.phy_repeater_cnt > 0 &&
if (link->dpcd_caps.lttpr_caps.phy_repeater_cnt > 0 &&
link->dpcd_caps.lttpr_caps.max_lane_count > 0 &&
link->dpcd_caps.lttpr_caps.max_lane_count <= 4 &&
link->dpcd_caps.lttpr_caps.revision.raw >= 0x14);
if (is_lttpr_present)
CONN_DATA_DETECT(link, lttpr_dpcd_data, sizeof(lttpr_dpcd_data), "LTTPR Caps: ");
link->dpcd_caps.lttpr_caps.revision.raw >= 0x14) {
link->is_lttpr_mode_transparent = false;
} else {
/*No lttpr reset timeout to its default value*/
link->is_lttpr_mode_transparent = true;
dc_link_aux_configure_timeout(link->ddc, LINK_AUX_DEFAULT_TIMEOUT_PERIOD);
}
CONN_DATA_DETECT(link, lttpr_dpcd_data, sizeof(lttpr_dpcd_data), "LTTPR Caps: ");
}
/* decide lttpr non transparent mode */
link->lttpr_non_transparent_mode = is_lttpr_present && link->dc->config.allow_lttpr_non_transparent_mode;
if (!is_lttpr_present)
dc_link_aux_try_to_configure_timeout(link->ddc, LINK_AUX_DEFAULT_TIMEOUT_PERIOD);
{
union training_aux_rd_interval aux_rd_interval;

View File

@ -281,7 +281,7 @@ void dp_set_hw_lane_settings(
{
struct link_encoder *encoder = link->link_enc;
if (link->lttpr_non_transparent_mode && !is_immediate_downstream(link, offset))
if (!link->is_lttpr_mode_transparent && !is_immediate_downstream(link, offset))
return;
/* call Encoder to set lane settings */

View File

@ -283,7 +283,7 @@ struct dc_config {
bool edp_not_connected;
bool force_enum_edp;
bool forced_clocks;
bool allow_lttpr_non_transparent_mode;
bool disable_extended_timeout_support; // Used to disable extended timeout and lttpr feature as well
bool multi_mon_pp_mclk_switch;
bool disable_dmcu;
bool enable_4to1MPC;

View File

@ -101,7 +101,6 @@ struct dc_link {
bool aux_access_disabled;
bool sync_lt_in_progress;
bool is_lttpr_mode_transparent;
bool lttpr_non_transparent_mode;
/* caps is the same as reported_link_cap. link_traing use
* reported_link_cap. Will clean up. TODO

View File

@ -1806,7 +1806,7 @@ static bool dcn21_resource_construct(
dc->caps.max_slave_planes = 1;
dc->caps.post_blend_color_processing = true;
dc->caps.force_dp_tps4_for_cp2520 = true;
dc->caps.extended_aux_timeout_support = true;
dc->caps.extended_aux_timeout_support = false;
dc->caps.dmcub_support = true;
dc->caps.is_apu = true;

View File

@ -105,7 +105,7 @@ int dc_link_aux_transfer_raw(struct ddc_service *ddc,
bool dc_link_aux_transfer_with_retries(struct ddc_service *ddc,
struct aux_payload *payload);
bool dc_link_aux_try_to_configure_timeout(struct ddc_service *ddc,
uint32_t dc_link_aux_configure_timeout(struct ddc_service *ddc,
uint32_t timeout);
void dal_ddc_service_write_scdc_data(

View File

@ -28,7 +28,7 @@
#define LINK_TRAINING_ATTEMPTS 4
#define LINK_TRAINING_RETRY_DELAY 50 /* ms */
#define LINK_AUX_DEFAULT_LTTPR_TIMEOUT_PERIOD 3200 /*us*/
#define LINK_AUX_DEFAULT_EXTENDED_TIMEOUT_PERIOD 3200 /*us*/
#define LINK_AUX_DEFAULT_TIMEOUT_PERIOD 552 /*us*/
struct dc_link;