arm64: dts: rockchip: move Chromebook-specific Gru-parts to a separate file
Similar to rk3288-Veyron before, the Gru-series does contain Chromebook (aka clamshell laptops) and non-Chromebook devices. And while the two Chromebook devices Kevin and Bob are quite similar, Scarlet the tablet- device is quite different in its design. Therefore move the Chromebook parts into a gru-chromebook dtsi file to make sharing easier. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Heiko Stuebner
parent
ea3cb4812e
commit
a0aa6bfebc
|
|
@ -0,0 +1,363 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Google Gru-Chromebook shared properties
|
||||
*
|
||||
* Copyright 2018 Google, Inc
|
||||
*/
|
||||
|
||||
#include "rk3399-gru.dtsi"
|
||||
|
||||
/ {
|
||||
pp900_ap: pp900-ap {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pp900_ap";
|
||||
|
||||
/* EC turns on w/ pp900_ap_en; always on for AP */
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
vin-supply = <&ppvar_sys>;
|
||||
};
|
||||
|
||||
/* EC turns on w/ pp900_usb_en */
|
||||
pp900_usb: pp900-ap {
|
||||
};
|
||||
|
||||
/* EC turns on w/ pp900_pcie_en */
|
||||
pp900_pcie: pp900-ap {
|
||||
};
|
||||
|
||||
pp3000: pp3000 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pp3000";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pp3000_en>;
|
||||
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
|
||||
vin-supply = <&ppvar_sys>;
|
||||
};
|
||||
|
||||
ppvar_centerlogic_pwm: ppvar-centerlogic-pwm {
|
||||
compatible = "pwm-regulator";
|
||||
regulator-name = "ppvar_centerlogic_pwm";
|
||||
|
||||
pwms = <&pwm3 0 3337 0>;
|
||||
pwm-supply = <&ppvar_sys>;
|
||||
pwm-dutycycle-range = <100 0>;
|
||||
pwm-dutycycle-unit = <100>;
|
||||
|
||||
/* EC turns on w/ ppvar_centerlogic_en; always on for AP */
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <799434>;
|
||||
regulator-max-microvolt = <1049925>;
|
||||
};
|
||||
|
||||
ppvar_centerlogic: ppvar-centerlogic {
|
||||
compatible = "vctrl-regulator";
|
||||
regulator-name = "ppvar_centerlogic";
|
||||
|
||||
regulator-min-microvolt = <799434>;
|
||||
regulator-max-microvolt = <1049925>;
|
||||
|
||||
ctrl-supply = <&ppvar_centerlogic_pwm>;
|
||||
ctrl-voltage-range = <799434 1049925>;
|
||||
|
||||
regulator-settling-time-up-us = <378>;
|
||||
min-slew-down-rate = <225>;
|
||||
ovp-threshold-percent = <16>;
|
||||
};
|
||||
|
||||
/* Schematics call this PPVAR even though it's fixed */
|
||||
ppvar_logic: ppvar-logic {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "ppvar_logic";
|
||||
|
||||
/* EC turns on w/ ppvar_logic_en; always on for AP */
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
vin-supply = <&ppvar_sys>;
|
||||
};
|
||||
|
||||
pp1800_audio: pp1800-audio {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pp1800_audio";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pp1800_audio_en>;
|
||||
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
vin-supply = <&pp1800>;
|
||||
};
|
||||
|
||||
/* gpio is shared with pp3300_wifi_bt */
|
||||
pp1800_pcie: pp1800-pcie {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pp1800_pcie";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wlan_module_pd_l>;
|
||||
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
/*
|
||||
* Need to wait 1ms + ramp-up time before we can power on WiFi.
|
||||
* This has been approximated as 8ms total.
|
||||
*/
|
||||
regulator-enable-ramp-delay = <8000>;
|
||||
|
||||
vin-supply = <&pp1800>;
|
||||
};
|
||||
|
||||
/* Always on; plain and simple */
|
||||
pp3000_ap: pp3000_emmc: pp3000 {
|
||||
};
|
||||
|
||||
pp1500_ap_io: pp1500-ap-io {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pp1500_ap_io";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pp1500_en>;
|
||||
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
|
||||
vin-supply = <&pp1800>;
|
||||
};
|
||||
|
||||
pp3300_disp: pp3300-disp {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pp3300_disp";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pp3300_disp_en>;
|
||||
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
startup-delay-us = <2000>;
|
||||
vin-supply = <&pp3300>;
|
||||
};
|
||||
|
||||
/* EC turns on w/ pp3300_usb_en_l */
|
||||
pp3300_usb: pp3300 {
|
||||
};
|
||||
|
||||
/* gpio is shared with pp1800_pcie and pinctrl is set there */
|
||||
pp3300_wifi_bt: pp3300-wifi-bt {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pp3300_wifi_bt";
|
||||
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
vin-supply = <&pp3300>;
|
||||
};
|
||||
|
||||
/*
|
||||
* This is a bit of a hack. The WiFi module should be reset at least
|
||||
* 1ms after its regulators have ramped up (max rampup time is ~7ms).
|
||||
* With some stretching of the imagination, we can call the 1.8V
|
||||
* regulator a supply.
|
||||
*/
|
||||
wlan_pd_n: wlan-pd-n {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "wlan_pd_n";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wlan_module_reset_l>;
|
||||
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
vin-supply = <&pp1800_pcie>;
|
||||
};
|
||||
};
|
||||
|
||||
&ppvar_bigcpu {
|
||||
min-slew-down-rate = <225>;
|
||||
ovp-threshold-percent = <16>;
|
||||
};
|
||||
|
||||
&ppvar_litcpu {
|
||||
min-slew-down-rate = <225>;
|
||||
ovp-threshold-percent = <16>;
|
||||
};
|
||||
|
||||
&ppvar_gpu {
|
||||
min-slew-down-rate = <225>;
|
||||
ovp-threshold-percent = <16>;
|
||||
};
|
||||
|
||||
&cdn_dp {
|
||||
extcon = <&usbc_extcon0>, <&usbc_extcon1>;
|
||||
};
|
||||
|
||||
ap_i2c_mic: &i2c1 {
|
||||
status = "okay";
|
||||
|
||||
clock-frequency = <400000>;
|
||||
|
||||
/* These are relatively safe rise/fall times */
|
||||
i2c-scl-falling-time-ns = <50>;
|
||||
i2c-scl-rising-time-ns = <300>;
|
||||
|
||||
headsetcodec: rt5514@57 {
|
||||
compatible = "realtek,rt5514";
|
||||
reg = <0x57>;
|
||||
realtek,dmic-init-delay-ms = <20>;
|
||||
};
|
||||
};
|
||||
|
||||
ap_i2c_tp: &i2c5 {
|
||||
status = "okay";
|
||||
|
||||
clock-frequency = <400000>;
|
||||
|
||||
/* These are relatively safe rise/fall times */
|
||||
i2c-scl-falling-time-ns = <50>;
|
||||
i2c-scl-rising-time-ns = <300>;
|
||||
|
||||
/*
|
||||
* Note strange pullup enable. Apparently this avoids leakage but
|
||||
* still allows us to get nice 4.7K pullups for high speed i2c
|
||||
* transfers. Basically we want the pullup on whenever the ap is
|
||||
* alive, so the "en" pin just gets set to output high.
|
||||
*/
|
||||
pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>;
|
||||
};
|
||||
|
||||
&cros_ec {
|
||||
cros_ec_pwm: ec-pwm {
|
||||
compatible = "google,cros-ec-pwm";
|
||||
#pwm-cells = <1>;
|
||||
};
|
||||
|
||||
usbc_extcon1: extcon@1 {
|
||||
compatible = "google,extcon-usbc-cros-ec";
|
||||
google,usb-port-id = <1>;
|
||||
|
||||
#extcon-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&sound {
|
||||
rockchip,codec = <&max98357a &headsetcodec
|
||||
&codec &wacky_spi_audio &cdn_dp>;
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
wacky_spi_audio: spi2@0 {
|
||||
compatible = "realtek,rt5514";
|
||||
reg = <0>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mic_int>;
|
||||
/* May run faster once verified. */
|
||||
spi-max-frequency = <10000000>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&pci_rootport {
|
||||
mvl_wifi: wifi@0,0 {
|
||||
compatible = "pci1b4b,2b42";
|
||||
reg = <0x83010000 0x0 0x00000000 0x0 0x00100000
|
||||
0x83010000 0x0 0x00100000 0x0 0x00100000>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wlan_host_wake_l>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&tcphy1 {
|
||||
status = "okay";
|
||||
extcon = <&usbc_extcon1>;
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3_1 {
|
||||
status = "okay";
|
||||
extcon = <&usbc_extcon1>;
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_1 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
discrete-regulators {
|
||||
pp1500_en: pp1500-en {
|
||||
rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO
|
||||
&pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pp1800_audio_en: pp1800-audio-en {
|
||||
rockchip,pins = <RK_GPIO0 2 RK_FUNC_GPIO
|
||||
&pcfg_pull_down>;
|
||||
};
|
||||
|
||||
pp3000_en: pp3000-en {
|
||||
rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO
|
||||
&pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pp3300_disp_en: pp3300-disp-en {
|
||||
rockchip,pins = <RK_GPIO4 27 RK_FUNC_GPIO
|
||||
&pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wlan_module_pd_l: wlan-module-pd-l {
|
||||
rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO
|
||||
&pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wifi {
|
||||
wifi_perst_l: wifi-perst-l {
|
||||
rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wlan_host_wake_l: wlan-host-wake-l {
|
||||
rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
|
@ -6,7 +6,7 @@
|
|||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3399-gru.dtsi"
|
||||
#include "rk3399-gru-chromebook.dtsi"
|
||||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
|
||||
/*
|
||||
|
|
@ -337,10 +337,4 @@ ap_i2c_dig: &i2c2 {
|
|||
rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
wifi {
|
||||
wlan_host_wake_l: wlan-host-wake-l {
|
||||
rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -45,19 +45,6 @@
|
|||
regulator-boot-on;
|
||||
};
|
||||
|
||||
pp900_ap: pp900-ap {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pp900_ap";
|
||||
|
||||
/* EC turns on w/ pp900_ap_en; always on for AP */
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
vin-supply = <&ppvar_sys>;
|
||||
};
|
||||
|
||||
pp1200_lpddr: pp1200-lpddr {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pp1200_lpddr";
|
||||
|
|
@ -84,23 +71,6 @@
|
|||
vin-supply = <&ppvar_sys>;
|
||||
};
|
||||
|
||||
pp3000: pp3000 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pp3000";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pp3000_en>;
|
||||
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
|
||||
vin-supply = <&ppvar_sys>;
|
||||
};
|
||||
|
||||
pp3300: pp3300 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pp3300";
|
||||
|
|
@ -154,8 +124,6 @@
|
|||
ctrl-voltage-range = <800107 1302232>;
|
||||
|
||||
regulator-settling-time-up-us = <322>;
|
||||
min-slew-down-rate = <225>;
|
||||
ovp-threshold-percent = <16>;
|
||||
};
|
||||
|
||||
ppvar_litcpu_pwm: ppvar-litcpu-pwm {
|
||||
|
|
@ -185,8 +153,6 @@
|
|||
ctrl-voltage-range = <797743 1307837>;
|
||||
|
||||
regulator-settling-time-up-us = <384>;
|
||||
min-slew-down-rate = <225>;
|
||||
ovp-threshold-percent = <16>;
|
||||
};
|
||||
|
||||
ppvar_gpu_pwm: ppvar-gpu-pwm {
|
||||
|
|
@ -216,63 +182,12 @@
|
|||
ctrl-voltage-range = <786384 1217747>;
|
||||
|
||||
regulator-settling-time-up-us = <390>;
|
||||
min-slew-down-rate = <225>;
|
||||
ovp-threshold-percent = <16>;
|
||||
};
|
||||
|
||||
ppvar_centerlogic_pwm: ppvar-centerlogic-pwm {
|
||||
compatible = "pwm-regulator";
|
||||
regulator-name = "ppvar_centerlogic_pwm";
|
||||
|
||||
pwms = <&pwm3 0 3337 0>;
|
||||
pwm-supply = <&ppvar_sys>;
|
||||
pwm-dutycycle-range = <100 0>;
|
||||
pwm-dutycycle-unit = <100>;
|
||||
|
||||
/* EC turns on w/ ppvar_centerlogic_en; always on for AP */
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <799434>;
|
||||
regulator-max-microvolt = <1049925>;
|
||||
};
|
||||
|
||||
ppvar_centerlogic: ppvar-centerlogic {
|
||||
compatible = "vctrl-regulator";
|
||||
regulator-name = "ppvar_centerlogic";
|
||||
|
||||
regulator-min-microvolt = <799434>;
|
||||
regulator-max-microvolt = <1049925>;
|
||||
|
||||
ctrl-supply = <&ppvar_centerlogic_pwm>;
|
||||
ctrl-voltage-range = <799434 1049925>;
|
||||
|
||||
regulator-settling-time-up-us = <378>;
|
||||
min-slew-down-rate = <225>;
|
||||
ovp-threshold-percent = <16>;
|
||||
};
|
||||
|
||||
/* Schematics call this PPVAR even though it's fixed */
|
||||
ppvar_logic: ppvar-logic {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "ppvar_logic";
|
||||
|
||||
/* EC turns on w/ ppvar_logic_en; always on for AP */
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
vin-supply = <&ppvar_sys>;
|
||||
};
|
||||
|
||||
/* EC turns on w/ pp900_ddrpll_en */
|
||||
pp900_ddrpll: pp900-ap {
|
||||
};
|
||||
|
||||
/* EC turns on w/ pp900_pcie_en */
|
||||
pp900_pcie: pp900-ap {
|
||||
};
|
||||
|
||||
/* EC turns on w/ pp900_pll_en */
|
||||
pp900_pll: pp900-ap {
|
||||
};
|
||||
|
|
@ -281,10 +196,6 @@
|
|||
pp900_pmu: pp900-ap {
|
||||
};
|
||||
|
||||
/* EC turns on w/ pp900_usb_en */
|
||||
pp900_usb: pp900-ap {
|
||||
};
|
||||
|
||||
/* EC turns on w/ pp1800_s0_en_l */
|
||||
pp1800_ap_io: pp1800_emmc: pp1800_nfc: pp1800_s0: pp1800 {
|
||||
};
|
||||
|
|
@ -309,79 +220,6 @@
|
|||
pp1800_usb: pp1800 {
|
||||
};
|
||||
|
||||
pp1500_ap_io: pp1500-ap-io {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pp1500_ap_io";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pp1500_en>;
|
||||
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
|
||||
vin-supply = <&pp1800>;
|
||||
};
|
||||
|
||||
pp1800_audio: pp1800-audio {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pp1800_audio";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pp1800_audio_en>;
|
||||
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
vin-supply = <&pp1800>;
|
||||
};
|
||||
|
||||
/* gpio is shared with pp3300_wifi_bt */
|
||||
pp1800_pcie: pp1800-pcie {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pp1800_pcie";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wlan_module_pd_l>;
|
||||
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
/*
|
||||
* Need to wait 1ms + ramp-up time before we can power on WiFi.
|
||||
* This has been approximated as 8ms total.
|
||||
*/
|
||||
regulator-enable-ramp-delay = <8000>;
|
||||
|
||||
vin-supply = <&pp1800>;
|
||||
};
|
||||
|
||||
/*
|
||||
* This is a bit of a hack. The WiFi module should be reset at least
|
||||
* 1ms after its regulators have ramped up (max rampup time is ~7ms).
|
||||
* With some stretching of the imagination, we can call the 1.8V
|
||||
* regulator a supply.
|
||||
*/
|
||||
wlan_pd_n: wlan-pd-n {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "wlan_pd_n";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wlan_module_reset_l>;
|
||||
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
vin-supply = <&pp1800_pcie>;
|
||||
};
|
||||
|
||||
/* Always on; plain and simple */
|
||||
pp3000_ap: pp3000_emmc: pp3000 {
|
||||
};
|
||||
|
||||
pp3000_sd_slot: pp3000-sd-slot {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pp3000_sd_slot";
|
||||
|
|
@ -420,34 +258,6 @@
|
|||
pp3300_trackpad: pp3300-trackpad {
|
||||
};
|
||||
|
||||
/* EC turns on w/ pp3300_usb_en_l */
|
||||
pp3300_usb: pp3300 {
|
||||
};
|
||||
|
||||
pp3300_disp: pp3300-disp {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pp3300_disp";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pp3300_disp_en>;
|
||||
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
startup-delay-us = <2000>;
|
||||
vin-supply = <&pp3300>;
|
||||
};
|
||||
|
||||
/* gpio is shared with pp1800_pcie and pinctrl is set there */
|
||||
pp3300_wifi_bt: pp3300-wifi-bt {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pp3300_wifi_bt";
|
||||
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
vin-supply = <&pp3300>;
|
||||
};
|
||||
|
||||
/* EC turns on w/ usb_a_en */
|
||||
pp5000_usb_a_vbus: pp5000 {
|
||||
};
|
||||
|
|
@ -478,14 +288,11 @@
|
|||
sound: sound {
|
||||
compatible = "rockchip,rk3399-gru-sound";
|
||||
rockchip,cpu = <&i2s0 &i2s2>;
|
||||
rockchip,codec = <&max98357a &headsetcodec
|
||||
&codec &wacky_spi_audio &cdn_dp>;
|
||||
};
|
||||
};
|
||||
|
||||
&cdn_dp {
|
||||
status = "okay";
|
||||
extcon = <&usbc_extcon0>, <&usbc_extcon1>;
|
||||
};
|
||||
|
||||
/*
|
||||
|
|
@ -576,22 +383,6 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
ap_i2c_mic: &i2c1 {
|
||||
status = "okay";
|
||||
|
||||
clock-frequency = <400000>;
|
||||
|
||||
/* These are relatively safe rise/fall times */
|
||||
i2c-scl-falling-time-ns = <50>;
|
||||
i2c-scl-rising-time-ns = <300>;
|
||||
|
||||
headsetcodec: rt5514@57 {
|
||||
compatible = "realtek,rt5514";
|
||||
reg = <0x57>;
|
||||
realtek,dmic-init-delay-ms = <20>;
|
||||
};
|
||||
};
|
||||
|
||||
ap_i2c_ts: &i2c3 {
|
||||
status = "okay";
|
||||
|
||||
|
|
@ -602,24 +393,6 @@ ap_i2c_ts: &i2c3 {
|
|||
i2c-scl-rising-time-ns = <300>;
|
||||
};
|
||||
|
||||
ap_i2c_tp: &i2c5 {
|
||||
status = "okay";
|
||||
|
||||
clock-frequency = <400000>;
|
||||
|
||||
/* These are relatively safe rise/fall times */
|
||||
i2c-scl-falling-time-ns = <50>;
|
||||
i2c-scl-rising-time-ns = <300>;
|
||||
|
||||
/*
|
||||
* Note strange pullup enable. Apparently this avoids leakage but
|
||||
* still allows us to get nice 4.7K pullups for high speed i2c
|
||||
* transfers. Basically we want the pullup on whenever the ap is
|
||||
* alive, so the "en" pin just gets set to output high.
|
||||
*/
|
||||
pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>;
|
||||
};
|
||||
|
||||
ap_i2c_audio: &i2c8 {
|
||||
status = "okay";
|
||||
|
||||
|
|
@ -693,17 +466,6 @@ ap_i2c_audio: &i2c8 {
|
|||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
mvl_wifi: wifi@0,0 {
|
||||
compatible = "pci1b4b,2b42";
|
||||
reg = <0x83010000 0x0 0x00000000 0x0 0x00100000
|
||||
0x83010000 0x0 0x00100000 0x0 0x00100000>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wlan_host_wake_l>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -793,18 +555,6 @@ ap_i2c_audio: &i2c8 {
|
|||
|
||||
&spi2 {
|
||||
status = "okay";
|
||||
|
||||
wacky_spi_audio: spi2@0 {
|
||||
compatible = "realtek,rt5514";
|
||||
reg = <0>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mic_int>;
|
||||
/* May run faster once verified. */
|
||||
spi-max-frequency = <10000000>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&spi5 {
|
||||
|
|
@ -826,24 +576,12 @@ ap_i2c_audio: &i2c8 {
|
|||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
cros_ec_pwm: ec-pwm {
|
||||
compatible = "google,cros-ec-pwm";
|
||||
#pwm-cells = <1>;
|
||||
};
|
||||
|
||||
usbc_extcon0: extcon@0 {
|
||||
compatible = "google,extcon-usbc-cros-ec";
|
||||
google,usb-port-id = <0>;
|
||||
|
||||
#extcon-cells = <0>;
|
||||
};
|
||||
|
||||
usbc_extcon1: extcon@1 {
|
||||
compatible = "google,extcon-usbc-cros-ec";
|
||||
google,usb-port-id = <1>;
|
||||
|
||||
#extcon-cells = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -859,19 +597,10 @@ ap_i2c_audio: &i2c8 {
|
|||
extcon = <&usbc_extcon0>;
|
||||
};
|
||||
|
||||
&tcphy1 {
|
||||
status = "okay";
|
||||
extcon = <&usbc_extcon1>;
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -892,22 +621,10 @@ ap_i2c_audio: &i2c8 {
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3_0 {
|
||||
status = "okay";
|
||||
extcon = <&usbc_extcon0>;
|
||||
|
|
@ -918,16 +635,6 @@ ap_i2c_audio: &i2c8 {
|
|||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&usbdrd3_1 {
|
||||
status = "okay";
|
||||
extcon = <&usbc_extcon1>;
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_1 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&vopb {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -986,26 +693,6 @@ ap_i2c_audio: &i2c8 {
|
|||
};
|
||||
|
||||
discrete-regulators {
|
||||
pp1500_en: pp1500-en {
|
||||
rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO
|
||||
&pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pp1800_audio_en: pp1800-audio-en {
|
||||
rockchip,pins = <RK_GPIO0 2 RK_FUNC_GPIO
|
||||
&pcfg_pull_down>;
|
||||
};
|
||||
|
||||
pp3300_disp_en: pp3300-disp-en {
|
||||
rockchip,pins = <RK_GPIO4 27 RK_FUNC_GPIO
|
||||
&pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pp3000_en: pp3000-en {
|
||||
rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO
|
||||
&pcfg_pull_none>;
|
||||
};
|
||||
|
||||
sd_io_pwr_en: sd-io-pwr-en {
|
||||
rockchip,pins = <RK_GPIO2 2 RK_FUNC_GPIO
|
||||
&pcfg_pull_none>;
|
||||
|
|
@ -1020,11 +707,6 @@ ap_i2c_audio: &i2c8 {
|
|||
rockchip,pins = <RK_GPIO4 29 RK_FUNC_GPIO
|
||||
&pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wlan_module_pd_l: wlan-module-pd-l {
|
||||
rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO
|
||||
&pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
codec {
|
||||
|
|
@ -1132,10 +814,6 @@ ap_i2c_audio: &i2c8 {
|
|||
};
|
||||
|
||||
wifi: wifi {
|
||||
wifi_perst_l: wifi-perst-l {
|
||||
rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wlan_module_reset_l: wlan-module-reset-l {
|
||||
rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
|
|
|||
Loading…
Reference in New Issue