PNP: use dev_info(), dev_err(), etc in core

If we have the struct pnp_dev available, we can use dev_info(), dev_err(),
etc., to give a little more information and consistency.

[akpm@linux-foundation.org: fix warning]
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Bjorn Helgaas 2007-10-16 23:31:10 -07:00 committed by Linus Torvalds
parent 5bfc43a0b6
commit a05d078169
7 changed files with 31 additions and 29 deletions

View File

@ -7,3 +7,7 @@ obj-y := core.o card.o driver.o resource.o manager.o support.o interface.o quir
obj-$(CONFIG_PNPACPI) += pnpacpi/
obj-$(CONFIG_PNPBIOS) += pnpbios/
obj-$(CONFIG_ISAPNP) += isapnp/
ifeq ($(CONFIG_PNP_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
endif

View File

@ -198,8 +198,7 @@ int pnp_add_card(struct pnp_card *card)
card->dev.release = &pnp_release_card;
error = device_register(&card->dev);
if (error) {
pnp_err("sysfs failure, card '%s' will be unavailable",
card->dev.bus_id);
dev_err(&card->dev, "could not register (err=%d)\n", error);
return error;
}

View File

@ -86,9 +86,6 @@ static int pnp_device_probe(struct device *dev)
pnp_dev = to_pnp_dev(dev);
pnp_drv = to_pnp_driver(dev->driver);
pnp_dbg("match found with the PnP device '%s' and the driver '%s'",
dev->bus_id, pnp_drv->name);
error = pnp_device_attach(pnp_dev);
if (error < 0)
return error;
@ -116,6 +113,8 @@ static int pnp_device_probe(struct device *dev)
error = 0;
} else
goto fail;
dev_dbg(dev, "driver attached\n");
return error;
fail:

View File

@ -327,8 +327,7 @@ pnp_set_current_resources(struct device *dmdev, struct device_attribute *attr,
if (dev->status & PNP_ATTACHED) {
retval = -EBUSY;
pnp_info("Device %s cannot be configured because it is in use.",
dev->dev.bus_id);
dev_info(&dev->dev, "in use; can't configure\n");
goto done;
}

View File

@ -22,8 +22,7 @@ static int pnp_assign_port(struct pnp_dev *dev, struct pnp_port *rule, int idx)
unsigned long *flags;
if (idx >= PNP_MAX_PORT) {
pnp_err
("More than 4 ports is incompatible with pnp specifications.");
dev_err(&dev->dev, "too many I/O port resources\n");
/* pretend we were successful so at least the manager won't try again */
return 1;
}
@ -64,8 +63,7 @@ static int pnp_assign_mem(struct pnp_dev *dev, struct pnp_mem *rule, int idx)
unsigned long *flags;
if (idx >= PNP_MAX_MEM) {
pnp_err
("More than 8 mems is incompatible with pnp specifications.");
dev_err(&dev->dev, "too many memory resources\n");
/* pretend we were successful so at least the manager won't try again */
return 1;
}
@ -122,8 +120,7 @@ static int pnp_assign_irq(struct pnp_dev *dev, struct pnp_irq *rule, int idx)
};
if (idx >= PNP_MAX_IRQ) {
pnp_err
("More than 2 irqs is incompatible with pnp specifications.");
dev_err(&dev->dev, "too many IRQ resources\n");
/* pretend we were successful so at least the manager won't try again */
return 1;
}
@ -173,8 +170,7 @@ static void pnp_assign_dma(struct pnp_dev *dev, struct pnp_dma *rule, int idx)
};
if (idx >= PNP_MAX_DMA) {
pnp_err("More than 2 dmas is incompatible with pnp "
"specifications.");
dev_err(&dev->dev, "too many DMA resources\n");
return;
}
@ -442,8 +438,7 @@ int pnp_auto_config_dev(struct pnp_dev *dev)
int i = 1;
if (!pnp_can_configure(dev)) {
pnp_dbg("Device %s does not support resource configuration.",
dev->dev.bus_id);
dev_dbg(&dev->dev, "configuration not supported\n");
return -ENODEV;
}
@ -460,7 +455,7 @@ int pnp_auto_config_dev(struct pnp_dev *dev)
} while (dep);
}
pnp_err("Unable to assign resources to device %s.", dev->dev.bus_id);
dev_err(&dev->dev, "unable to assign resources\n");
return -EBUSY;
}
@ -473,17 +468,16 @@ int pnp_auto_config_dev(struct pnp_dev *dev)
int pnp_start_dev(struct pnp_dev *dev)
{
if (!pnp_can_write(dev)) {
pnp_dbg("Device %s does not support activation.",
dev->dev.bus_id);
dev_dbg(&dev->dev, "activation not supported\n");
return -EINVAL;
}
if (dev->protocol->set(dev, &dev->res) < 0) {
pnp_err("Failed to activate device %s.", dev->dev.bus_id);
dev_err(&dev->dev, "activation failed\n");
return -EIO;
}
pnp_info("Device %s activated.", dev->dev.bus_id);
dev_info(&dev->dev, "activated\n");
return 0;
}
@ -496,16 +490,15 @@ int pnp_start_dev(struct pnp_dev *dev)
int pnp_stop_dev(struct pnp_dev *dev)
{
if (!pnp_can_disable(dev)) {
pnp_dbg("Device %s does not support disabling.",
dev->dev.bus_id);
dev_dbg(&dev->dev, "disabling not supported\n");
return -EINVAL;
}
if (dev->protocol->disable(dev) < 0) {
pnp_err("Failed to disable device %s.", dev->dev.bus_id);
dev_err(&dev->dev, "disable failed\n");
return -EIO;
}
pnp_info("Device %s disabled.", dev->dev.bus_id);
dev_info(&dev->dev, "disabled\n");
return 0;
}

View File

@ -17,6 +17,7 @@
#include <linux/slab.h>
#include <linux/pnp.h>
#include <linux/io.h>
#include <linux/kallsyms.h>
#include "base.h"
static void quirk_awe32_resources(struct pnp_dev *dev)
@ -133,11 +134,18 @@ static struct pnp_fixup pnp_fixups[] = {
void pnp_fixup_device(struct pnp_dev *dev)
{
int i = 0;
void (*quirk)(struct pnp_dev *);
while (*pnp_fixups[i].id) {
if (compare_pnp_id(dev->id, pnp_fixups[i].id)) {
pnp_dbg("Calling quirk for %s", dev->dev.bus_id);
pnp_fixups[i].quirk_function(dev);
quirk = pnp_fixups[i].quirk_function;
#ifdef DEBUG
dev_dbg(&dev->dev, "calling quirk 0x%p", quirk);
print_fn_descriptor_symbol(": %s()\n",
(unsigned long) *quirk);
#endif
(*quirk)(dev);
}
i++;
}

View File

@ -51,7 +51,7 @@ struct pnp_option *pnp_register_independent_option(struct pnp_dev *dev)
/* this should never happen but if it does we'll try to continue */
if (dev->independent)
pnp_err("independent resource already registered");
dev_err(&dev->dev, "independent resource already registered\n");
dev->independent = option;
return option;
}