drm/i915: Decrease gen2 vco frequency minimum to 908 MHz
On my 855 machine the BIOS uses the following DPLL settings: DPLL 0x90016000 FP0 = 0x61207 FP1 = 0x21207 With the 66MHz SSC refclock, that puts the BIOS generated VCO frequency at ~908 MHz, which is lower than the 930 MHz limit we have currently. This also results in the pixel clock coming out significantly higher than the requested 65 MHz when we try to recompute it. Reduce the the VCO limit to 908 MHz. Combined with the earlier SSC reference clock accuracy fix, this results in the pixel clock coming out as 65.08 MHz which is quite close to the target. For some reason the BIOS uses 64.881 MHz, which isn't quite as close. This makes kms_flip wf_vblank-ts-check pass for the first time on this machine \o/ Cc: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This commit is contained in:
parent
e91e941bd5
commit
9c333719ae
|
@ -90,7 +90,7 @@ intel_fdi_link_freq(struct drm_device *dev)
|
|||
|
||||
static const intel_limit_t intel_limits_i8xx_dac = {
|
||||
.dot = { .min = 25000, .max = 350000 },
|
||||
.vco = { .min = 930000, .max = 1512000 },
|
||||
.vco = { .min = 908000, .max = 1512000 },
|
||||
.n = { .min = 2, .max = 16 },
|
||||
.m = { .min = 96, .max = 140 },
|
||||
.m1 = { .min = 18, .max = 26 },
|
||||
|
@ -103,7 +103,7 @@ static const intel_limit_t intel_limits_i8xx_dac = {
|
|||
|
||||
static const intel_limit_t intel_limits_i8xx_dvo = {
|
||||
.dot = { .min = 25000, .max = 350000 },
|
||||
.vco = { .min = 930000, .max = 1512000 },
|
||||
.vco = { .min = 908000, .max = 1512000 },
|
||||
.n = { .min = 2, .max = 16 },
|
||||
.m = { .min = 96, .max = 140 },
|
||||
.m1 = { .min = 18, .max = 26 },
|
||||
|
@ -116,7 +116,7 @@ static const intel_limit_t intel_limits_i8xx_dvo = {
|
|||
|
||||
static const intel_limit_t intel_limits_i8xx_lvds = {
|
||||
.dot = { .min = 25000, .max = 350000 },
|
||||
.vco = { .min = 930000, .max = 1512000 },
|
||||
.vco = { .min = 908000, .max = 1512000 },
|
||||
.n = { .min = 2, .max = 16 },
|
||||
.m = { .min = 96, .max = 140 },
|
||||
.m1 = { .min = 18, .max = 26 },
|
||||
|
|
Loading…
Reference in New Issue