usb: isp1760: otg control register access
The set/clear of the otg control values is done writing to two different 16bit registers, however we setup the regmap width for isp1760/61 to 32bit value bits. So, just access the clear register address (0x376)as the high part of the otg control register set (0x374), and write the values in one go to make sure they get clear/set. Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Link: https://lore.kernel.org/r/20210827131154.4151862-6-rui.silva@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
parent
955d0fb590
commit
9c1587d99f
|
@ -30,6 +30,7 @@ static int isp1760_init_core(struct isp1760_device *isp)
|
|||
{
|
||||
struct isp1760_hcd *hcd = &isp->hcd;
|
||||
struct isp1760_udc *udc = &isp->udc;
|
||||
u32 otg_ctrl;
|
||||
|
||||
/* Low-level chip reset */
|
||||
if (isp->rst_gpio) {
|
||||
|
@ -83,16 +84,17 @@ static int isp1760_init_core(struct isp1760_device *isp)
|
|||
*
|
||||
* TODO: Really support OTG. For now we configure port 1 in device mode
|
||||
*/
|
||||
if (((isp->devflags & ISP1760_FLAG_ISP1761) ||
|
||||
(isp->devflags & ISP1760_FLAG_ISP1763)) &&
|
||||
(isp->devflags & ISP1760_FLAG_PERIPHERAL_EN)) {
|
||||
isp1760_field_set(hcd->fields, HW_DM_PULLDOWN);
|
||||
isp1760_field_set(hcd->fields, HW_DP_PULLDOWN);
|
||||
isp1760_field_set(hcd->fields, HW_OTG_DISABLE);
|
||||
} else {
|
||||
isp1760_field_set(hcd->fields, HW_SW_SEL_HC_DC);
|
||||
isp1760_field_set(hcd->fields, HW_VBUS_DRV);
|
||||
isp1760_field_set(hcd->fields, HW_SEL_CP_EXT);
|
||||
if (isp->devflags & ISP1760_FLAG_ISP1761) {
|
||||
if (isp->devflags & ISP1760_FLAG_PERIPHERAL_EN) {
|
||||
otg_ctrl = (ISP176x_HW_DM_PULLDOWN_CLEAR |
|
||||
ISP176x_HW_DP_PULLDOWN_CLEAR |
|
||||
ISP176x_HW_OTG_DISABLE);
|
||||
} else {
|
||||
otg_ctrl = (ISP176x_HW_SW_SEL_HC_DC_CLEAR |
|
||||
ISP176x_HW_VBUS_DRV |
|
||||
ISP176x_HW_SEL_CP_EXT);
|
||||
}
|
||||
isp1760_reg_write(hcd->regs, ISP176x_HC_OTG_CTRL, otg_ctrl);
|
||||
}
|
||||
|
||||
dev_info(isp->dev, "%s bus width: %u, oc: %s\n",
|
||||
|
@ -235,20 +237,20 @@ static const struct reg_field isp1760_hc_reg_fields[] = {
|
|||
[HC_ISO_IRQ_MASK_AND] = REG_FIELD(ISP176x_HC_ISO_IRQ_MASK_AND, 0, 31),
|
||||
[HC_INT_IRQ_MASK_AND] = REG_FIELD(ISP176x_HC_INT_IRQ_MASK_AND, 0, 31),
|
||||
[HC_ATL_IRQ_MASK_AND] = REG_FIELD(ISP176x_HC_ATL_IRQ_MASK_AND, 0, 31),
|
||||
[HW_OTG_DISABLE] = REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 10, 10),
|
||||
[HW_SW_SEL_HC_DC] = REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 7, 7),
|
||||
[HW_VBUS_DRV] = REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 4, 4),
|
||||
[HW_SEL_CP_EXT] = REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 3, 3),
|
||||
[HW_DM_PULLDOWN] = REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 2, 2),
|
||||
[HW_DP_PULLDOWN] = REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 1, 1),
|
||||
[HW_DP_PULLUP] = REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 0, 0),
|
||||
[HW_OTG_DISABLE_CLEAR] = REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 10, 10),
|
||||
[HW_SW_SEL_HC_DC_CLEAR] = REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 7, 7),
|
||||
[HW_VBUS_DRV_CLEAR] = REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 4, 4),
|
||||
[HW_SEL_CP_EXT_CLEAR] = REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 3, 3),
|
||||
[HW_DM_PULLDOWN_CLEAR] = REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 2, 2),
|
||||
[HW_DP_PULLDOWN_CLEAR] = REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 1, 1),
|
||||
[HW_DP_PULLUP_CLEAR] = REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 0, 0),
|
||||
[HW_OTG_DISABLE_CLEAR] = REG_FIELD(ISP176x_HC_OTG_CTRL, 26, 26),
|
||||
[HW_SW_SEL_HC_DC_CLEAR] = REG_FIELD(ISP176x_HC_OTG_CTRL, 23, 23),
|
||||
[HW_VBUS_DRV_CLEAR] = REG_FIELD(ISP176x_HC_OTG_CTRL, 20, 20),
|
||||
[HW_SEL_CP_EXT_CLEAR] = REG_FIELD(ISP176x_HC_OTG_CTRL, 19, 19),
|
||||
[HW_DM_PULLDOWN_CLEAR] = REG_FIELD(ISP176x_HC_OTG_CTRL, 18, 18),
|
||||
[HW_DP_PULLDOWN_CLEAR] = REG_FIELD(ISP176x_HC_OTG_CTRL, 17, 17),
|
||||
[HW_DP_PULLUP_CLEAR] = REG_FIELD(ISP176x_HC_OTG_CTRL, 16, 16),
|
||||
[HW_OTG_DISABLE] = REG_FIELD(ISP176x_HC_OTG_CTRL, 10, 10),
|
||||
[HW_SW_SEL_HC_DC] = REG_FIELD(ISP176x_HC_OTG_CTRL, 7, 7),
|
||||
[HW_VBUS_DRV] = REG_FIELD(ISP176x_HC_OTG_CTRL, 4, 4),
|
||||
[HW_SEL_CP_EXT] = REG_FIELD(ISP176x_HC_OTG_CTRL, 3, 3),
|
||||
[HW_DM_PULLDOWN] = REG_FIELD(ISP176x_HC_OTG_CTRL, 2, 2),
|
||||
[HW_DP_PULLDOWN] = REG_FIELD(ISP176x_HC_OTG_CTRL, 1, 1),
|
||||
[HW_DP_PULLUP] = REG_FIELD(ISP176x_HC_OTG_CTRL, 0, 0),
|
||||
};
|
||||
|
||||
static const struct reg_field isp1763_hc_reg_fields[] = {
|
||||
|
|
|
@ -61,6 +61,7 @@
|
|||
#define ISP176x_HC_INT_IRQ_MASK_AND 0x328
|
||||
#define ISP176x_HC_ATL_IRQ_MASK_AND 0x32c
|
||||
|
||||
#define ISP176x_HC_OTG_CTRL 0x374
|
||||
#define ISP176x_HC_OTG_CTRL_SET 0x374
|
||||
#define ISP176x_HC_OTG_CTRL_CLEAR 0x376
|
||||
|
||||
|
@ -179,6 +180,21 @@ enum isp176x_host_controller_fields {
|
|||
#define ISP176x_DC_IESUSP BIT(3)
|
||||
#define ISP176x_DC_IEBRST BIT(0)
|
||||
|
||||
#define ISP176x_HW_OTG_DISABLE_CLEAR BIT(26)
|
||||
#define ISP176x_HW_SW_SEL_HC_DC_CLEAR BIT(23)
|
||||
#define ISP176x_HW_VBUS_DRV_CLEAR BIT(20)
|
||||
#define ISP176x_HW_SEL_CP_EXT_CLEAR BIT(19)
|
||||
#define ISP176x_HW_DM_PULLDOWN_CLEAR BIT(18)
|
||||
#define ISP176x_HW_DP_PULLDOWN_CLEAR BIT(17)
|
||||
#define ISP176x_HW_DP_PULLUP_CLEAR BIT(16)
|
||||
#define ISP176x_HW_OTG_DISABLE BIT(10)
|
||||
#define ISP176x_HW_SW_SEL_HC_DC BIT(7)
|
||||
#define ISP176x_HW_VBUS_DRV BIT(4)
|
||||
#define ISP176x_HW_SEL_CP_EXT BIT(3)
|
||||
#define ISP176x_HW_DM_PULLDOWN BIT(2)
|
||||
#define ISP176x_HW_DP_PULLDOWN BIT(1)
|
||||
#define ISP176x_HW_DP_PULLUP BIT(0)
|
||||
|
||||
#define ISP176x_DC_ENDPTYP_ISOC 0x01
|
||||
#define ISP176x_DC_ENDPTYP_BULK 0x02
|
||||
#define ISP176x_DC_ENDPTYP_INTERRUPT 0x03
|
||||
|
|
Loading…
Reference in New Issue