UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next 

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates

This series contains updates to e1000, igb and ixgbe.

Emil provides his version 2 fix for the detection of SFP+ capable interfaces.
In cases where the driver is loaded while there are no SFP+ modules in cage,
the interface was not being detected as SFP capable.  Resolve the issue by
identifying interfaces with no PHY type set as SFP capable which allows the
driver to detect the SFP module when the interface is brought up.  In this
version 2 of the patch, the 82599 specific check was removed since we only
have 82598 devices that are SFP capable.

Jacob removes the including of the export header in the ixgbe PTP core, since
it is not needed.  Renames igb_ptp_enable() to igb_ptp_feature_enable() to
better reflect the actual functions purpose.

Todd fixes the ethtool loopback test for i354 backplane devices since we
do not know what PHY is to be used for the devices, use MAC loopback for
ethtool tests.  Todd also sets the packet buffer size register defaults for
i210 devices.

Yongjian Xu removes the check for skb->len being negative or zero since there
is never a case where it would be zero or negative for e1000.

Manuel Schölling updates e1000 to use the time_after() helper function.

v2: Fix indentation on wrapped line in patch 3 of the series based on
    feedback from David Miller
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller 2014-06-04 14:40:17 -07:00
parent c99f7abf0e 1aa65f4d7f
commit 9bcc14d239
10 changed files with 24 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
drivers/net/ethernet/intel/e1000/e1000_ethtool.c
View File

@ -1460,7 +1460,8 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
* enough time to complete the receives, if it's
* exceeded, break and error off
*/
} while (good_cnt < 64 && jiffies < (time + 20));
} while (good_cnt < 64 && time_after(time + 20, jiffies));
if (good_cnt != 64) {
ret_val = 13; /* ret_val is the same as mis-compare */
break;

5
drivers/net/ethernet/intel/e1000/e1000_main.c
View File

@ -3105,11 +3105,6 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
*/
tx_ring = adapter->tx_ring;
if (unlikely(skb->len <= 0)) {
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
/* On PCI/PCI-X HW, if packet size is less than ETH_ZLEN,
* packets may get corrupted during padding by HW.
* To WA this issue, pad all small packets manually.

3
drivers/net/ethernet/intel/igb/e1000_defines.h
View File

@ -329,6 +329,9 @@
/* Timestamp in Rx buffer */
#define E1000_RXPBS_CFG_TS_EN 0x80000000
#define I210_RXPBSIZE_DEFAULT 0x000000A2 /* RXPBSIZE default */
#define I210_TXPBSIZE_DEFAULT 0x04000014 /* TXPBSIZE default */
/* SerDes Control */
#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400

4
drivers/net/ethernet/intel/igb/e1000_regs.h
View File

@ -192,6 +192,10 @@
: (0x0E038 + ((_n) * 0x40)))
#define E1000_TDWBAH(_n) ((_n) < 4 ? (0x0383C + ((_n) * 0x100)) \
: (0x0E03C + ((_n) * 0x40)))
#define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */
#define E1000_TXPBS 0x03404 /* Tx Packet Buffer Size - RW */
#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */
#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */
#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */

4
drivers/net/ethernet/intel/igb/igb_ethtool.c
View File

@ -1665,8 +1665,8 @@ static int igb_setup_loopback_test(struct igb_adapter *adapter)
(hw->device_id == E1000_DEV_ID_DH89XXCC_SERDES) ||
(hw->device_id == E1000_DEV_ID_DH89XXCC_BACKPLANE) ||
(hw->device_id == E1000_DEV_ID_DH89XXCC_SFP) ||
(hw->device_id == E1000_DEV_ID_I354_SGMII)) {
(hw->device_id == E1000_DEV_ID_I354_SGMII) ||
(hw->device_id == E1000_DEV_ID_I354_BACKPLANE_2_5GBPS)) {
/* Enable DH89xxCC MPHY for near end loopback */
reg = rd32(E1000_MPHY_ADDR_CTL);
reg = (reg & E1000_MPHY_ADDR_CTL_OFFSET_MASK) |

6
drivers/net/ethernet/intel/igb/igb_main.c
View File

@ -2433,6 +2433,12 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* get firmware version for ethtool -i */
igb_set_fw_version(adapter);
/* configure RXPBSIZE and TXPBSIZE */
if (hw->mac.type == e1000_i210) {
wr32(E1000_RXPBS, I210_RXPBSIZE_DEFAULT);
wr32(E1000_TXPBS, I210_TXPBSIZE_DEFAULT);
}
setup_timer(&adapter->watchdog_timer, igb_watchdog,
(unsigned long) adapter);
setup_timer(&adapter->phy_info_timer, igb_update_phy_info,

8
drivers/net/ethernet/intel/igb/igb_ptp.c
View File

@ -360,7 +360,7 @@ static int igb_ptp_settime_i210(struct ptp_clock_info *ptp,
return 0;
}
static int igb_ptp_enable(struct ptp_clock_info *ptp,
static int igb_ptp_feature_enable(struct ptp_clock_info *ptp,
struct ptp_clock_request *rq, int on)
{
return -EOPNOTSUPP;
@ -745,7 +745,7 @@ void igb_ptp_init(struct igb_adapter *adapter)
adapter->ptp_caps.adjtime = igb_ptp_adjtime_82576;
adapter->ptp_caps.gettime = igb_ptp_gettime_82576;
adapter->ptp_caps.settime = igb_ptp_settime_82576;
adapter->ptp_caps.enable = igb_ptp_enable;
adapter->ptp_caps.enable = igb_ptp_feature_enable;
adapter->cc.read = igb_ptp_read_82576;
adapter->cc.mask = CLOCKSOURCE_MASK(64);
adapter->cc.mult = 1;
@ -765,7 +765,7 @@ void igb_ptp_init(struct igb_adapter *adapter)
adapter->ptp_caps.adjtime = igb_ptp_adjtime_82576;
adapter->ptp_caps.gettime = igb_ptp_gettime_82576;
adapter->ptp_caps.settime = igb_ptp_settime_82576;
adapter->ptp_caps.enable = igb_ptp_enable;
adapter->ptp_caps.enable = igb_ptp_feature_enable;
adapter->cc.read = igb_ptp_read_82580;
adapter->cc.mask = CLOCKSOURCE_MASK(IGB_NBITS_82580);
adapter->cc.mult = 1;
@ -784,7 +784,7 @@ void igb_ptp_init(struct igb_adapter *adapter)
adapter->ptp_caps.adjtime = igb_ptp_adjtime_i210;
adapter->ptp_caps.gettime = igb_ptp_gettime_i210;
adapter->ptp_caps.settime = igb_ptp_settime_i210;
adapter->ptp_caps.enable = igb_ptp_enable;
adapter->ptp_caps.enable = igb_ptp_feature_enable;
/* Enable the timer functions by clearing bit 31. */
wr32(E1000_TSAUXC, 0x0);
break;

7
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
View File

@ -161,13 +161,6 @@ static int ixgbe_get_settings(struct net_device *netdev,
bool autoneg = false;
bool link_up;
/* SFP type is needed for get_link_capabilities */
if (hw->phy.media_type & (ixgbe_media_type_fiber |
ixgbe_media_type_fiber_qsfp)) {
if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
hw->phy.ops.identify_sfp(hw);
}
hw->mac.ops.get_link_capabilities(hw, &supported_link, &autoneg);
/* set the supported link speeds */

2
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
View File

@ -4656,6 +4656,8 @@ static inline bool ixgbe_is_sfp(struct ixgbe_hw *hw)
case ixgbe_phy_qsfp_active_unknown:
case ixgbe_phy_qsfp_intel:
case ixgbe_phy_qsfp_unknown:
/* ixgbe_phy_none is set when no SFP module is present */
case ixgbe_phy_none:
return true;
case ixgbe_phy_nl:
if (hw->mac.type == ixgbe_mac_82598EB)

1
drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
View File

@ -26,7 +26,6 @@
*******************************************************************************/
#include "ixgbe.h"
#include <linux/export.h>
#include <linux/ptp_classify.h>
/*