sh: sh7366 Enable SDIO IRQs

This patch enables interrupt generation for SDIO IRQs
of the SDHI block on the sh7366 processor. Use together
with a recent SDHI driver using TMIO_MMC_SDIO_IRQ and
with the MMC_CAP_SDIO_IRQ flag in the board code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This commit is contained in:
Magnus Damm 2011-01-06 11:12:27 +00:00 committed by Paul Mundt
parent 3a0f4c7899
commit 9bbe7b9840
1 changed files with 14 additions and 10 deletions

View File

@ -319,6 +319,8 @@ void __init plat_early_device_setup(void)
enum {
UNUSED=0,
ENABLED,
DISABLED,
/* interrupt sources */
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
@ -332,14 +334,13 @@ enum {
DENC, MSIOF,
FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI,
SDHI0, SDHI1, SDHI2, SDHI3,
CMT, TSIF, SIU,
SDHI, CMT, TSIF, SIU,
TMU0, TMU1, TMU2,
VEU2, LCDC,
/* interrupt groups */
DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C, SDHI,
DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C,
};
static struct intc_vect vectors[] __initdata = {
@ -364,8 +365,8 @@ static struct intc_vect vectors[] __initdata = {
INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
INTC_VECT(I2C_ALI, 0xe00), INTC_VECT(I2C_TACKI, 0xe20),
INTC_VECT(I2C_WAITI, 0xe40), INTC_VECT(I2C_DTEI, 0xe60),
INTC_VECT(SDHI0, 0xe80), INTC_VECT(SDHI1, 0xea0),
INTC_VECT(SDHI2, 0xec0), INTC_VECT(SDHI3, 0xee0),
INTC_VECT(SDHI, 0xe80), INTC_VECT(SDHI, 0xea0),
INTC_VECT(SDHI, 0xec0), INTC_VECT(SDHI, 0xee0),
INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
INTC_VECT(SIU, 0xf80),
INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
@ -381,7 +382,6 @@ static struct intc_group groups[] __initdata = {
INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
INTC_GROUP(I2C, I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI),
INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3),
};
static struct intc_mask_reg mask_registers[] __initdata = {
@ -403,7 +403,7 @@ static struct intc_mask_reg mask_registers[] __initdata = {
{ I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
{ SDHI3, SDHI2, SDHI1, SDHI0, 0, 0, 0, SIU } },
{ DISABLED, ENABLED, ENABLED, ENABLED, 0, 0, 0, SIU } },
{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
{ 0, 0, 0, CMT, 0, USB, } },
{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
@ -441,9 +441,13 @@ static struct intc_mask_reg ack_registers[] __initdata = {
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
static DECLARE_INTC_DESC_ACK(intc_desc, "sh7366", vectors, groups,
mask_registers, prio_registers, sense_registers,
ack_registers);
static struct intc_desc intc_desc __initdata = {
.name = "sh7366",
.force_enable = ENABLED,
.force_disable = DISABLED,
.hw = INTC_HW_DESC(vectors, groups, mask_registers,
prio_registers, sense_registers, ack_registers),
};
void __init plat_irq_setup(void)
{