New boards NanoPi R2S, A95X-Z2 and more Rock-Pi4 variants.

Khadas-edge additions and a some fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl9ryD0QHGhlaWtvQHNu
 dGVjaC5kZQAKCRDzpnnJnNEdgU20CACU6tSCmlWEQ2dK3KLavODfcs2GvBpNlUA9
 xfoSmMcVbiFosmO7t9gSbJHkIqadMaU/XDZWU/aIcnnPffX3YnCSqRiRWmtw05PG
 7kBwHgPOqWhNc9fB7saj/sxth39V/7WKl3qwGuEPUZSDPJ/ZO9008vM0d6kbIQbA
 ubZqFZA3fM847Ej5LJgJ1yY2adYPYL5b43b5y6H5Us1nXPt5ONHrSoLhLLeoCVk8
 Ds+UdkLeu7zy2fDN4V6jhkEVFPgG2yq+xeDudIsFk1WXWsB7lO8yGdhPwfOrRire
 fsK3dGyO8dKvc8rhshTYwEPyJchrIIQsJFdqLBbVKeVW2mHxKtjC
 =WETP
 -----END PGP SIGNATURE-----

Merge tag 'v5.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

New boards NanoPi R2S, A95X-Z2 and more Rock-Pi4 variants.
Khadas-edge additions and a some fixes.

* tag 'v5.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: add ir-receiver node to rk3399-khadas-edge
  arm64: dts: rockchip: add spiflash node to rk3399-khadas-edge
  arm64: dts: rockchip: Add support for FriendlyARM NanoPi R2S
  dt-bindings: Add doc for FriendlyARM NanoPi R2S
  arm64: dts: rockchip: replace status value "ok" by "okay"
  arm64: dts: rockchip: fix cpu-supply for rk3328-evb
  arm64: dts: rockchip: add rk3318 A95X Z2 board
  dt-bindings: arm: rockchip: add Zkmagic A95X Z2 description
  dt-bindings: Add vendor prefix for Shenzhen Zkmagic Technology Co., Ltd.
  arm64: dts: rockchip: Add Radxa ROCK Pi 4C support
  arm64: dts: rockchip: Add Radxa ROCK Pi 4B support
  arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts
  dt-bindings: arm: rockchip: Update ROCKPi 4 binding
  arm64: dts: rockchip: change spdif fallback compatible on rk3308
  arm64: dts: rockchip: Fix power routing to support POE on rk3399-roc-pc

Link: https://lore.kernel.org/r/16010805.MhVyP8KKtY@diego
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/rockchip.yaml

@@ -104,6 +104,11 @@ properties:
               - firefly,roc-rk3399-pc-mezzanine
           - const: rockchip,rk3399
 
+      - description: FriendlyElec NanoPi R2S
+        items:
+          - const: friendlyarm,nanopi-r2s
+          - const: rockchip,rk3328
+
       - description: FriendlyElec NanoPi4 series boards
         items:
           - enum:
@@ -430,8 +435,12 @@ properties:
           - const: radxa,rock
           - const: rockchip,rk3188
 
-      - description: Radxa ROCK Pi 4
+      - description: Radxa ROCK Pi 4A/B/C
         items:
+          - enum:
+              - radxa,rockpi4a
+              - radxa,rockpi4b
+              - radxa,rockpi4c
           - const: radxa,rockpi4
           - const: rockchip,rk3399
 
@@ -555,4 +564,9 @@ properties:
         items:
           - const: tronsmart,orion-r68-meta
           - const: rockchip,rk3368
+
+      - description: Zkmagic A95X Z2
+        items:
+          - const: zkmagic,a95x-z2
+          - const: rockchip,rk3318
 ...

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -1198,6 +1198,8 @@ patternProperties:
     description: Shenzhen Zidoo Technology Co., Ltd.
   "^zii,.*":
     description: Zodiac Inflight Innovations
+  "^zkmagic,.*":
+    description: Shenzhen Zkmagic Technology Co., Ltd.
   "^zte,.*":
     description: ZTE Corp.
   "^zyxel,.*":

arch/arm64/boot/dts/rockchip/Makefile

@@ -2,9 +2,11 @@
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
@@ -33,7 +35,9 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb
-dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb

arch/arm64/boot/dts/rockchip/rk3308.dtsi

@@ -574,7 +574,7 @@
 	};
 
 	spdif_tx: spdif-tx@ff3a0000 {
-		compatible = "rockchip,rk3308-spdif", "rockchip,rk3328-spdif";
+		compatible = "rockchip,rk3308-spdif", "rockchip,rk3066-spdif";
 		reg = <0x0 0xff3a0000 0x0 0x1000>;
 		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_SPDIF_TX>, <&cru HCLK_SPDIFTX>;

arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts

@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3328.dtsi"
+
+/ {
+	model = "A95X Z2";
+	compatible = "zkmagic,a95x-z2", "rockchip,rk3318";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		recovery {
+			label = "recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <17000>;
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&ir_int>;
+		pinctrl-names = "default";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&cyx_led_pin>;
+		pinctrl-names = "default";
+
+		cyx_led: led-0 {
+			default-state = "on";
+			gpios = <&gpio2 RK_PC7 GPIO_ACTIVE_LOW>;
+			label = "CYX_LED";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+	};
+
+	spdif-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	/* Power tree */
+	vccio_1v8: vccio-1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vccio_3v3: vccio-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vcc_otg_vbus: otg-vbus-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&otg_vbus_drv>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&sdmmc0m1_pin>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vccio_3v3>;
+	};
+
+	vdd_arm: vdd-arm {
+		compatible = "pwm-regulator";
+		pwms = <&pwm0 0 5000 1>;
+		regulator-name = "vdd_arm";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-settling-time-up-us = <250>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 5000 1>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-settling-time-up-us = <250>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&analog_sound {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu0_opp_table {
+	opp-1200000000 {
+		status = "disabled";
+	};
+
+	opp-1296000000 {
+		status = "disabled";
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	non-removable;
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gmac2phy {
+	assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
+	assigned-clock-rate = <50000000>;
+	assigned-clocks = <&cru SCLK_MAC2PHY>;
+	clock_in_out = "output";
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_log>;
+};
+
+&hdmi {
+	ddc-i2c-scl-high-time-ns = <9625>;
+	ddc-i2c-scl-low-time-ns = <10000>;
+	status = "okay";
+};
+
+&hdmiphy {
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&i2s1 {
+	status = "okay";
+};
+
+&io_domains {
+	pmuio-supply = <&vccio_3v3>;
+	vccio1-supply = <&vccio_3v3>;
+	vccio2-supply = <&vccio_1v8>;
+	vccio3-supply = <&vccio_3v3>;
+	vccio4-supply = <&vccio_1v8>;
+	vccio5-supply = <&vccio_3v3>;
+	vccio6-supply = <&vccio_3v3>;
+	status = "okay";
+};
+
+&pinctrl {
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		cyx_led_pin: cyx-led-pin {
+			rockchip,pins = <2 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pwm0 {
+		pwm0_pin_pull_up: pwm0-pin-pull-up {
+			rockchip,pins = <2 RK_PA4 1 &pcfg_pull_up>;
+		};
+	};
+
+	pwm1 {
+		pwm1_pin_pull_up: pwm1-pin-pull-up {
+			rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc1 {
+		clk_32k_out: clk-32k-out {
+			rockchip,pins = <1 RK_PD4 1 &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0_pin_pull_up>;
+	pinctrl-names = "active";
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-0 = <&pwm1_pin_pull_up>;
+	pinctrl-names = "active";
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vccio_1v8>;
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	max-frequency = <125000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &clk_32k_out>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-0 = <&spdifm0_tx>;
+	status = "okay";
+};
+
+&soc_crit {
+	temperature = <115000>; /* millicelsius */
+};
+
+&target {
+	temperature = <105000>; /* millicelsius */
+};
+
+&threshold {
+	temperature = <90000>; /* millicelsius */
+};
+
+&tsadc {
+	rockchip,hw-tshut-temp = <120000>;
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	phy-supply = <&vcc_otg_vbus>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb20_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};

arch/arm64/boot/dts/rockchip/rk3328-evb.dts

@@ -70,6 +70,18 @@
 	cpu-supply = <&vdd_arm>;
 };
 
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
 &emmc {
 	bus-width = <8>;
 	cap-mmc-highspeed;

arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts

@@ -0,0 +1,368 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 David Bauer <mail@david-bauer.net>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "rk3328.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi R2S";
+	compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac_clk: gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac_clk";
+		#clock-cells = <0>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&reset_button_pin>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <50>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&lan_led_pin>,  <&sys_led_pin>, <&wan_led_pin>;
+		pinctrl-names = "default";
+
+		lan_led: led-0 {
+			gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+			label = "nanopi-r2s:green:lan";
+		};
+
+		sys_led: led-1 {
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+			label = "nanopi-r2s:red:sys";
+		};
+
+		wan_led: led-2 {
+			gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
+			label = "nanopi-r2s:green:wan";
+		};
+	};
+
+	vcc_io_sdio: sdmmcio-regulator {
+		compatible = "regulator-gpio";
+		enable-active-high;
+		gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&sdio_vcc_pin>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_io_sdio";
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-settling-time-us = <5000>;
+		regulator-type = "voltage";
+		startup-delay-us = <2000>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		vin-supply = <&vcc_io_33>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&sdmmc0m1_pin>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_sd";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io_33>;
+	};
+
+	vdd_5v: vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&gmac2io {
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
+	clock_in_out = "input";
+	phy-handle = <&rtl8211e>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_io_33>;
+	pinctrl-0 = <&rgmiim1_pins>;
+	pinctrl-names = "default";
+	rx_delay = <0x18>;
+	snps,aal;
+	tx_delay = <0x24>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtl8211e: ethernet-phy@1 {
+			reg = <1>;
+			pinctrl-0 = <&eth_phy_reset_pin>;
+			pinctrl-names = "default";
+			reset-assert-us = <10000>;
+			reset-deassert-us = <50000>;
+			reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: pmic@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-0 = <&pmic_int_l>;
+		pinctrl-names = "default";
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vdd_5v>;
+		vcc2-supply = <&vdd_5v>;
+		vcc3-supply = <&vdd_5v>;
+		vcc4-supply = <&vdd_5v>;
+		vcc5-supply = <&vcc_io_33>;
+		vcc6-supply = <&vdd_5v>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io_33: DCDC_REG4 {
+				regulator-name = "vcc_io_33";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_18: LDO_REG1 {
+				regulator-name = "vcc_18";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc18_emmc";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&io_domains {
+	pmuio-supply = <&vcc_io_33>;
+	vccio1-supply = <&vcc_io_33>;
+	vccio2-supply = <&vcc18_emmc>;
+	vccio3-supply = <&vcc_io_sdio>;
+	vccio4-supply = <&vcc_18>;
+	vccio5-supply = <&vcc_io_33>;
+	vccio6-supply = <&vcc_io_33>;
+	status = "okay";
+};
+
+&pinctrl {
+	button {
+		reset_button_pin: reset-button-pin {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ethernet-phy {
+		eth_phy_reset_pin: eth-phy-reset-pin {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		lan_led_pin: lan-led-pin {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		sys_led_pin: sys-led-pin {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wan_led_pin: wan-led-pin {
+			rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sd {
+		sdio_vcc_pin: sdio-vcc-pin {
+			rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
+	pinctrl-names = "default";
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vcc_io_sdio>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};

arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi

@@ -134,7 +134,7 @@
 	pinctrl-0 = <&rmii_pins>;
 	tx_delay = <0x30>;
 	rx_delay = <0x10>;
-	status = "ok";
+	status = "okay";
 };
 
 &i2c0 {

arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts

@@ -183,7 +183,7 @@
 	snps,reset-delays-us = <0 10000 1000000>;
 	tx_delay = <0x30>;
 	rx_delay = <0x10>;
-	status = "ok";
+	status = "okay";
 };
 
 &i2c0 {

arch/arm64/boot/dts/rockchip/rk3368-r88.dts

@@ -167,7 +167,7 @@
 	pinctrl-0 = <&rmii_pins>;
 	tx_delay = <0x30>;
 	rx_delay = <0x10>;
-	status = "ok";
+	status = "okay";
 };
 
 &i2c0 {
@@ -198,7 +198,7 @@
 };
 
 &io_domains {
-	status = "ok";
+	status = "okay";
 
 	audio-supply = <&vcc_io>;
 	gpio30-supply = <&vcc_io>;

arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi

@@ -138,6 +138,14 @@
 		};
 	};
 
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+		linux,rc-map-name = "rc-khadas";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_rx>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -585,6 +593,12 @@
 		};
 	};
 
+	ir {
+		ir_rx: ir-rx {
+		    rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	leds {
 		sys_led_pin: sys-led-pin {
 			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -690,6 +704,16 @@
 	status = "okay";
 };
 
+&spi1 {
+	status = "okay";
+
+	spiflash: flash@0 {
+		compatible = "winbond,w25q128fw", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+	};
+};
+
 &tcphy0 {
 	status = "okay";
 };

arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts

@@ -11,6 +11,16 @@
 	model = "Firefly ROC-RK3399-PC Mezzanine Board";
 	compatible = "firefly,roc-rk3399-pc-mezzanine", "rockchip,rk3399";
 
+	/* MP8009 PoE PD */
+	poe_12v: poe-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "poe_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
 	vcc3v3_ngff: vcc3v3-ngff {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_ngff";
@@ -22,7 +32,7 @@
 		regulator-boot-on;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		vin-supply = <&dc_12v>;
+		vin-supply = <&sys_12v>;
 	};
 
 	vcc3v3_pcie: vcc3v3-pcie {
@@ -34,10 +44,14 @@
 		pinctrl-0 = <&vcc3v3_pcie_en>;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		vin-supply = <&dc_12v>;
+		vin-supply = <&sys_12v>;
 	};
 };
 
+&sys_12v {
+	vin-supply = <&poe_12v>;
+};
+
 &pcie_phy {
 	status = "okay";
 };

arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi

@@ -110,6 +110,14 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
+	sys_12v: sys-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "sys_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc_12v>;
+	};
+
 	/* switched by pmic_sleep */
 	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
 		compatible = "regulator-fixed";
@@ -141,7 +149,7 @@
 		regulator-boot-on;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		vin-supply = <&dc_12v>;
+		vin-supply = <&sys_12v>;
 	};
 
 	vcca_0v9: vcca-0v9 {
@@ -186,7 +194,7 @@
 		regulator-boot-on;
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		vin-supply = <&dc_12v>;
+		vin-supply = <&sys_12v>;
 	};
 
 	vdd_log: vdd-log {

arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi

@@ -11,9 +11,6 @@
 #include "rk3399-opp.dtsi"
 
 / {
-	model = "Radxa ROCK Pi 4";
-	compatible = "radxa,rockpi4", "rockchip,rk3399";
-
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
@@ -587,17 +584,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
 	sd-uhs-sdr104;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		compatible = "brcm,bcm4329-fmac";
-		reg = <1>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
-		interrupt-names = "host-wake";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_host_wake_l>;
-	};
 };
 
 &sdmmc {
@@ -666,18 +652,6 @@
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
-		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
-	};
 };
 
 &uart2 {

arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a.dts

@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi 4A";
+	compatible = "radxa,rockpi4a", "radxa,rockpi4", "rockchip,rk3399";
+};

arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts

@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi 4B";
+	compatible = "radxa,rockpi4b", "radxa,rockpi4", "rockchip,rk3399";
+};
+
+&sdio0 {
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+	};
+};

arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts

@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi 4C";
+	compatible = "radxa,rockpi4c", "radxa,rockpi4", "rockchip,rk3399";
+};
+
+&sdio0 {
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+	};
+};
+
+&vcc5v0_host {
+	gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
+};
+
+&vcc5v0_host_en {
+	rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+};