Few cpsw related dts fixes for omaps

Recent cpsw driver changes exposed few regressions in the cpsw related
 dts configuration that would be good to fix:
 
 - Few more boards still need to be updated to use rgmii-rxid phy caused
   by the fallout from commit bcf3440c6d ("net: phy: micrel: add phy-mode
   support for the KSZ9031 PHY" as the rx delay is now disabled unless we
   use rgmii-rxid.
 
 - On dm814x we have been using a wrong clock for mdio that now can produce
   external abort on some boards
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl68I9MRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXO2/Q/+IiBtpAgZ1Y5XCXjfmBOGF5H5DKtSK7xd
 pOVqkRq6N0akGOuwLWaI9CHoJnEZ1VUMQZzBbZjCia640BeGvyM7rEs8ffCmvlqa
 aLRwDAV3+mg0D4M5TyElLqAc5a3pNBDmOvyUCgXAql6wy2tLdkzC+P8K+LaFltPW
 05j/jfLM5EOvfRPxX0xvz+qZYTiKeOw5GZosGz2MwRAemSFy5EWm9yTqyO+exJm3
 IMWkdwR9TBgkf8FE+QhuhnVIS+VmXT5VVFgAEcYWCmAOjvbPONFeumjKJNxTEgpf
 /IzuAE5FRr+d7OqPcHV8XFhsfw2NlyKmyqzdm+RTzV4RosmsU9c8rdkV/vqWfKbO
 oVw5DHFT20jRRCcFGJp81yMaeo6KPPe8X5l+0/DeyC0ai4Vq/eQKlJaB3LOsYJSa
 FUjyrCex8d2n2qQlkuXRCkIj259wPFtjFbgwQBzgYD33KEpOLlNseLMV3Qa8E63S
 qCZTAQs2rlEjJgmdByZ38Pjcu+Rq/qhwG12+73oF8tQmoNf+VSKVrfbki4Q5Ne37
 L8TvQFWODeE5aUu+MYRQKMDvMd6ufUtUDQLOSIO+pd0C5fDcaxUFT9kOvlM/zBW+
 b2AcggtPOeNFtoJK7V2Z4IpnqSdZyX+sPpUPLRZZr0V21bw22Gw6WLu0izMdPqWE
 mrzCYrDSy0k=
 =tWSS
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v5.7/cpsw-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Few cpsw related dts fixes for omaps

Recent cpsw driver changes exposed few regressions in the cpsw related
dts configuration that would be good to fix:

- Few more boards still need to be updated to use rgmii-rxid phy caused
  by the fallout from commit bcf3440c6d ("net: phy: micrel: add phy-mode
  support for the KSZ9031 PHY" as the rx delay is now disabled unless we
  use rgmii-rxid.

- On dm814x we have been using a wrong clock for mdio that now can produce
  external abort on some boards

* tag 'omap-for-v5.7/cpsw-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Fix wrong mdio clock for dm814x
  ARM: dts: am437x: fix networking on boards with ksz9031 phy
  ARM: dts: am57xx: fix networking on boards with ksz9031 phy

Link: https://lore.kernel.org/r/pull-1589472123-367692@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/am437x-gp-evm.dts

@@ -943,7 +943,7 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 };
 
 &elm {

arch/arm/boot/dts/am437x-idk-evm.dts

@@ -504,7 +504,7 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 };
 
 &rtc {

arch/arm/boot/dts/am437x-sk-evm.dts

@@ -833,13 +833,13 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
 	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	dual_emac_res_vlan = <2>;
 };
 

arch/arm/boot/dts/am571x-idk.dts

@@ -190,13 +190,13 @@
 
 &cpsw_port1 {
 	phy-handle = <&ethphy0_sw>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	ti,dual-emac-pvid = <1>;
 };
 
 &cpsw_port2 {
 	phy-handle = <&ethphy1_sw>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	ti,dual-emac-pvid = <2>;
 };
 

arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi

@@ -433,13 +433,13 @@
 
 &cpsw_emac0 {
 	phy-handle = <&phy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	dual_emac_res_vlan = <2>;
 };
 

arch/arm/boot/dts/am57xx-idk-common.dtsi

@@ -408,13 +408,13 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
 	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	dual_emac_res_vlan = <2>;
 };
 

arch/arm/boot/dts/dm814x.dtsi

@@ -693,7 +693,7 @@
 
 					davinci_mdio: mdio@800 {
 						compatible = "ti,cpsw-mdio", "ti,davinci_mdio";
-						clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>;
+						clocks = <&cpsw_125mhz_gclk>;
 						clock-names = "fck";
 						#address-cells = <1>;
 						#size-cells = <0>;