ARM: dts: qcom: msm8974-klte: Add gpio expander chip
The Samsung Galaxy S5 has a GPIO Expander chip, the PCAL6416A with 16 ports on a i2c bus. These pins are used for WiFi, NFC, IR among other things. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20200920144859.813032-6-iskren.chernev@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This commit is contained in:
parent
60367221d7
commit
99128e7503
|
@ -236,10 +236,25 @@
|
|||
scl-gpios = <&msmgpio 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&msmgpio 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c_led_pins>;
|
||||
pinctrl-0 = <&i2c_led_gpioex_pins>;
|
||||
|
||||
i2c-gpio,delay-us = <2>;
|
||||
|
||||
gpio_expander: gpio@20 {
|
||||
compatible = "nxp,pcal6416";
|
||||
reg = <0x20>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
vcc-supply = <&pma8084_s4>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gpioex_pin>;
|
||||
|
||||
reset-gpios = <&msmgpio 145 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-controller@30 {
|
||||
compatible = "panasonic,an30259a";
|
||||
reg = <0x30>;
|
||||
|
@ -352,7 +367,7 @@
|
|||
};
|
||||
};
|
||||
|
||||
i2c_led_pins: i2c-led {
|
||||
i2c_led_gpioex_pins: i2c-led-gpioex {
|
||||
mux {
|
||||
pins = "gpio120", "gpio121";
|
||||
function = "gpio";
|
||||
|
@ -360,6 +375,16 @@
|
|||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
gpioex_pin: gpioex {
|
||||
res {
|
||||
pins = "gpio145";
|
||||
function = "gpio";
|
||||
|
||||
bias-pull-up;
|
||||
drive-strength = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sdhci@f9824900 {
|
||||
|
|
Loading…
Reference in New Issue